Commit Graph

8239 Commits

Author SHA1 Message Date
Levi Tamasi
0a97125ec0 Fix data races in BlobDB (#5698)
Summary:
Some accesses to blob_files_ and open_ttl_files_ in BlobDBImpl, as well
as to expiration_range_ in BlobFile were not properly synchronized.
The patch fixes this and also makes sure the invariant that obsolete_files_
is a subset of blob_files_ holds even when an attempt to delete an obsolete
blob file fails.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5698

Test Plan:
COMPILE_WITH_TSAN=1 make blob_db_test
gtest-parallel --repeat=1000 ./blob_db_test --gtest_filter="*ShutdownWait*"

The test fails with TSAN errors ~20 times out of 1000 without the patch but
completes successfully 1000 out of 1000 times with the fix.

Differential Revision: D16793235

Pulled By: ltamasi

fbshipit-source-id: 8034b987598d4fdc9f15098d4589cc49cde484e9
2019-08-14 16:10:36 -07:00
Manuel Ung
4c70cb7306 WriteUnPrepared: support iterating while writing to transaction (#5699)
Summary:
In MyRocks, there are cases where we write while iterating through keys. This currently breaks WBWIIterator, because if a write batch flushes during iteration, the delta iterator would point to invalid memory.

For now, fix by disallowing flush if there are active iterators. In the future, we will loop through all the iterators on a transaction, and refresh the iterators when a write batch is flushed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5699

Differential Revision: D16794157

Pulled By: lth

fbshipit-source-id: 5d5bf70688bd68fe58e8a766475ae88fd1be3190
2019-08-14 14:28:53 -07:00
Zhongyi Xie
90cd6c2bb1 Fix double deletion in transaction_test (#5700)
Summary:
Fix the following clang analyze failures:
```
In file included from utilities/transactions/transaction_test.cc:8:
./utilities/transactions/transaction_test.h:174:14: warning: Attempt to delete released memory
      delete root_db;
             ^
```
The destructor of StackableDB already deletes the root db and there is no need to delete the db separately.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5700

Test Plan: USE_CLANG=1 TEST_TMPDIR=/dev/shm/rocksdb OPT=-g make -j24 analyze

Differential Revision: D16800579

Pulled By: maysamyabandeh

fbshipit-source-id: 64c2d70f23e07e6a15242add97c744902ea33be5
2019-08-13 21:54:55 -07:00
Manuel Ung
8a678a50ba WriteUnPrepared: Relax restriction on iterators and writes with no snapshot (#5697)
Summary:
Currently, if a write is done without a snapshot, then `largest_validated_seq_` is set to `kMaxSequenceNumber`. This is too aggressive, because an iterator with a snapshot created after this write should be valid.

Set `largest_validated_seq_` to `GetLastPublishedSequence` instead. The variable means that no keys in the current tracked key set has changed by other transactions since `largest_validated_seq_`.

Also, do some extra cleanup in Clear() for safety.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5697

Differential Revision: D16788613

Pulled By: lth

fbshipit-source-id: f2aa40b8b12e0c0cf9e38c940fecc8f1cc0d2385
2019-08-13 13:11:51 -07:00
Yi Zhang
04a849b7b4 Fix compiler error by deleting GetContext default ctor (#5685)
Summary:
When updating compiler version for MyRocks I'm seeing this error with rocksdb:

```
ome/yzha/mysql/mysql-fork2/rocksdb/table/get_context.h:91:3: error: explicitly defaulted default constructor is implicitly deleted
      [-Werror,-Wdefaulted-function-deleted]
  GetContext() = default;
  ^
/home/yzha/mysql/mysql-fork2/rocksdb/table/get_context.h:166:18: note: default constructor of 'GetContext' is implicitly deleted because field
      'tracing_get_id_' of const-qualified type 'const uint64_t' (aka 'const unsigned long') would not be initialized
  const uint64_t tracing_get_id_;
                 ^
```

The error itself is rather self explanatory and makes sense.

Given that no one seems to be using the default ctor (they shouldn't, anyway), I'm deleting it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5685

Differential Revision: D16747712

Pulled By: yizhang82

fbshipit-source-id: 95c0acb958a1ed41154c0047d2e6fce7644de53f
2019-08-12 16:42:10 -07:00
Maysam Yabandeh
64855979ae WriteUnPrepared: Pass snap_released to the callback (#5691)
Summary:
With changes made in https://github.com/facebook/rocksdb/pull/5664 we meant to pass snap_released parameter of ::IsInSnapshot from the read callbacks. Although the variable was defined, passing it to the callback in WritePreparedTxnReadCallback was missing, which is fixed in this PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5691

Differential Revision: D16767310

Pulled By: maysamyabandeh

fbshipit-source-id: 3bf53f5964a2756a66ceef7c8f6b3ac75f102f48
2019-08-12 12:20:46 -07:00
Manuel Ung
6f0f82de87 WriteUnPrepared: increase test coverage in transaction_test (#5658)
Summary:
The changes transaction_test to set `txn_db_options.default_write_batch_flush_threshold = 1` in order to give better test coverage for WriteUnprepared.

As part of the change, some tests had to be updated.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5658

Differential Revision: D16740468

Pulled By: lth

fbshipit-source-id: 3821eec20baf13917c8c1fab444332f75a509de9
2019-08-12 12:16:04 -07:00
Zhongyi Xie
de3fb9a6ff exclude TEST_ENV_URI from rocksdb lite (#5686)
Summary:
PR https://github.com/facebook/rocksdb/pull/5676 added some test coverage for `TEST_ENV_URI`, which unfortunately isn't supported in lite mode, causing some test failures for rocksdb lite. For example,
```
db/db_test_util.cc: In constructor ‘rocksdb::DBTestBase::DBTestBase(std::__cxx11::string)’:
db/db_test_util.cc:57:16: error: ‘ObjectRegistry’ has not been declared
     Status s = ObjectRegistry::NewInstance()->NewSharedObject(test_env_uri,
                ^
```
This PR fixes these errors by excluding the new code from test functions for lite mode.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5686

Differential Revision: D16749000

Pulled By: miasantreble

fbshipit-source-id: e8b3088c31a78b3dffc5fe7814261909d2c3e369
2019-08-10 19:15:05 -07:00
Maysam Yabandeh
12eaacb71d WritePrepared: Fix SmallestUnCommittedSeq bug (#5683)
Summary:
SmallestUnCommittedSeq reads two data structures, prepared_txns_ and delayed_prepared_. These two are updated in CheckPreparedAgainstMax when max_evicted_seq_ advances some prepared entires. To avoid the cost of acquiring a mutex, the read from them in SmallestUnCommittedSeq is not atomic. This creates a potential race condition.
The fix is to read the two data structures in the reverse order of their update. CheckPreparedAgainstMax copies the prepared entry to delayed_prepared_ before removing it from prepared_txns_ and SmallestUnCommittedSeq looks into prepared_txns_ before reading delayed_prepared_.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5683

Differential Revision: D16744699

Pulled By: maysamyabandeh

fbshipit-source-id: b1bdb134018beb0b9de58827f512662bea35cad0
2019-08-09 16:40:00 -07:00
Yanqin Jin
5d9a67e718 Support loading custom objects in unit tests (#5676)
Summary:
Most existing RocksDB unit tests run on `Env::Default()`. It will be useful to port the unit tests to non-default environments, e.g. `HdfsEnv`, etc.
This pull request is one step towards this goal. If RocksDB unit tests are built with a static library exposing a function `RegisterCustomObjects()`, then it is possible to implement custom object registrar logic in the library. RocksDB unit test can call `RegisterCustomObjects()` at the beginning.
By default, `ROCKSDB_UNITTESTS_WITH_CUSTOM_OBJECTS_FROM_STATIC_LIBS` is not defined, thus this PR has no impact on existing RocksDB because `RegisterCustomObjects()` is a noop.
Test plan (on devserver):
```
$make clean && COMPILE_WITH_ASAN=1 make -j32 all
$make check
```
All unit tests must pass.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5676

Differential Revision: D16679157

Pulled By: riversand963

fbshipit-source-id: aca571af3fd0525277cdc674248d0fe06e060f9d
2019-08-09 15:12:08 -07:00
haoyuhuang
3da225716c Block cache analyzer: Support reading from human readable trace file. (#5679)
Summary:
This PR adds support in block cache trace analyzer to read from human readable trace file. This is needed when a user does not have access to the binary trace file.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5679

Test Plan: USE_CLANG=1 make check -j32

Differential Revision: D16697239

Pulled By: HaoyuHuang

fbshipit-source-id: f2e29d7995816c389b41458f234ec8e184a924db
2019-08-09 13:13:54 -07:00
Zhongyi Xie
e0b84538af Fix clang_check and lite failures (#5680)
Summary:
This PR fixes two test failures:
1. clang check:
```
third-party/folly/folly/detail/Futex.cpp:52:12: error: implicit conversion loses integer precision: 'long' to 'int' [-Werror,-Wshorten-64-to-32]
  int rv = syscall(
      ~~   ^~~~~~~~
third-party/folly/folly/detail/Futex.cpp:114:12: error: implicit conversion loses integer precision: 'long' to 'int' [-Werror,-Wshorten-64-to-32]
  int rv = syscall(
      ~~   ^~~~~~~~
```
2. lite
```
./third-party/folly/folly/synchronization/DistributedMutex-inl.h:1337:7: error: exception handling disabled, use -fexceptions to enable
     } catch (...) {
       ^
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5680

Differential Revision: D16704042

Pulled By: miasantreble

fbshipit-source-id: a53cb06128365d9e864f07476b0af8fc27140f07
2019-08-07 20:19:39 -07:00
Aaryaman Sagar
38b03c840e Port folly/synchronization/DistributedMutex to rocksdb (#5642)
Summary:
This ports `folly::DistributedMutex` into RocksDB. The PR includes everything else needed to compile and use DistributedMutex as a component within folly. Most files are unchanged except for some portability stuff and includes.

For now, I've put this under `rocksdb/third-party`, but if there is a better folder to put this under, let me know. I also am not sure how or where to put unit tests for third-party stuff like this. It seems like gtest is included already, but I need to link with it from another third-party folder.

This also includes some other common components from folly

- folly/Optional
- folly/ScopeGuard (In particular `SCOPE_EXIT`)
- folly/synchronization/ParkingLot (A portable futex-like interface)
- folly/synchronization/AtomicNotification (The standard C++ interface for futexes)
- folly/Indestructible (For singletons that don't get destroyed without allocations)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5642

Differential Revision: D16544439

fbshipit-source-id: 179b98b5dcddc3075926d31a30f92fd064245731
2019-08-07 14:34:19 -07:00
haoyuhuang
6e78fe3c8d Pysim more algorithms (#5644)
Summary:
This PR adds four more eviction policies.
- OPT [1]
- Hyperbolic caching [2]
- ARC [3]
- GreedyDualSize [4]

[1] L. A. Belady. 1966. A Study of Replacement Algorithms for a Virtual-storage Computer. IBM Syst. J. 5, 2 (June 1966), 78-101. DOI=http://dx.doi.org/10.1147/sj.52.0078
[2] Aaron Blankstein, Siddhartha Sen, and Michael J. Freedman. 2017. Hyperbolic caching: flexible caching for web applications. In Proceedings of the 2017 USENIX Conference on Usenix Annual Technical Conference (USENIX ATC '17). USENIX Association, Berkeley, CA, USA, 499-511.
[3] Nimrod Megiddo and Dharmendra S. Modha. 2003. ARC: A Self-Tuning, Low Overhead Replacement Cache. In Proceedings of the 2nd USENIX Conference on File and Storage Technologies (FAST '03). USENIX Association, Berkeley, CA, USA, 115-130.
[4] N. Young. The k-server dual and loose competitiveness for paging. Algorithmica, June 1994, vol. 11,(no.6):525-41. Rewritten version of ''On-line caching as cache size varies'', in The 2nd Annual ACM-SIAM Symposium on Discrete Algorithms, 241-250, 1991.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5644

Differential Revision: D16548817

Pulled By: HaoyuHuang

fbshipit-source-id: 838f76db9179f07911abaab46c97e1c929cfcd63
2019-08-06 18:50:59 -07:00
Vijay Nadimpalli
d150e01474 New API to get all merge operands for a Key (#5604)
Summary:
This is a new API added to db.h to allow for fetching all merge operands associated with a Key. The main motivation for this API is to support use cases where doing a full online merge is not necessary as it is performance sensitive. Example use-cases:
1. Update subset of columns and read subset of columns -
Imagine a SQL Table, a row is encoded as a K/V pair (as it is done in MyRocks). If there are many columns and users only updated one of them, we can use merge operator to reduce write amplification. While users only read one or two columns in the read query, this feature can avoid a full merging of the whole row, and save some CPU.
2. Updating very few attributes in a value which is a JSON-like document -
Updating one attribute can be done efficiently using merge operator, while reading back one attribute can be done more efficiently if we don't need to do a full merge.
----------------------------------------------------------------------------------------------------
API :
Status GetMergeOperands(
      const ReadOptions& options, ColumnFamilyHandle* column_family,
      const Slice& key, PinnableSlice* merge_operands,
      GetMergeOperandsOptions* get_merge_operands_options,
      int* number_of_operands)

Example usage :
int size = 100;
int number_of_operands = 0;
std::vector<PinnableSlice> values(size);
GetMergeOperandsOptions merge_operands_info;
db_->GetMergeOperands(ReadOptions(), db_->DefaultColumnFamily(), "k1", values.data(), merge_operands_info, &number_of_operands);

Description :
Returns all the merge operands corresponding to the key. If the number of merge operands in DB is greater than merge_operands_options.expected_max_number_of_operands no merge operands are returned and status is Incomplete. Merge operands returned are in the order of insertion.
merge_operands-> Points to an array of at-least merge_operands_options.expected_max_number_of_operands and the caller is responsible for allocating it. If the status returned is Incomplete then number_of_operands will contain the total number of merge operands found in DB for key.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5604

Test Plan:
Added unit test and perf test in db_bench that can be run using the command:
./db_bench -benchmarks=getmergeoperands --merge_operator=sortlist

Differential Revision: D16657366

Pulled By: vjnadimpalli

fbshipit-source-id: 0faadd752351745224ee12d4ae9ef3cb529951bf
2019-08-06 14:26:44 -07:00
Yun Tang
4f98b43ba3 Correct the default write buffer size of java doc (#5670)
Summary:
The actual value of default write buffer size within `rocksdb/include/rocksdb/options.h` is 64 MB, we should correct this value in java doc.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5670

Differential Revision: D16668815

Pulled By: maysamyabandeh

fbshipit-source-id: cc3a981c9f1c2cd4a8392b0ed5f1fd0a2d729afb
2019-08-06 09:13:48 -07:00
Kefu Chai
cc9fa7fcdb cmake: cmake related cleanups (#5662)
Summary:
- cmake: use the builtin FindBzip2.cmake from CMake
- cmake: require CMake v3.5.1
- cmake: add imported target for 3rd party libraries
- cmake: extract ReadVersion.cmake out and refactor it
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5662

Differential Revision: D16660974

Pulled By: maysamyabandeh

fbshipit-source-id: 681594910e74253251fe14ad0befc41a4d0f4fd4
2019-08-05 19:51:20 -07:00
haoyuhuang
f4a616ebf9 Block cache analyzer: python script to plot graphs (#5673)
Summary:
This PR updated the python script to plot graphs for stats output from block cache analyzer.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5673

Test Plan: Manually run the script to generate graphs.

Differential Revision: D16657145

Pulled By: HaoyuHuang

fbshipit-source-id: fd510b5fd4307835f9a986fac545734dbe003d28
2019-08-05 18:35:52 -07:00
Yanqin Jin
b1a02ffeab Fix make target 'all' and 'check' (#5672)
Summary:
If a test is one of parallel tests, then it should also be one of the 'tests'.
Otherwise, `make all` won't build the binaries. For examle,
```
$COMPILE_WITH_ASAN=1 make -j32 all
```
Then if you do
```
$make check
```
The second command will invoke the compilation and building for db_bloom_test
and file_reader_writer_test **without** the `COMPILE_WITH_ASAN=1`, causing the
command to fail.

Test plan (on devserver):
```
$make -j32 all
```
Verify all binaries are built so that `make check` won't have to compile any
thing.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5672

Differential Revision: D16655834

Pulled By: riversand963

fbshipit-source-id: 050131412b5313496f85ae3deeeeb8d28af75746
2019-08-05 15:45:56 -07:00
Maysam Yabandeh
208556ee13 WritePrepared: fix Get without snapshot (#5664)
Summary:
if read_options.snapshot is not set, ::Get will take the last sequence number after taking a super-version and uses that as the sequence number. Theoretically max_eviceted_seq_ could advance this sequence number. This could lead ::IsInSnapshot that will be invoked by the ReadCallback to notice the absence of the snapshot. In this case, the ReadCallback should have passed a non-value to snap_released so that it could be set by the ::IsInSnapshot. The patch does that, and adds a unit test to verify it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5664

Differential Revision: D16614033

Pulled By: maysamyabandeh

fbshipit-source-id: 06fb3fd4aacd75806ed1a1acec7961f5d02486f2
2019-08-05 13:41:21 -07:00
Maysam Yabandeh
e579e32eaa Disable ReadYourOwnWriteStress when run under Valgrind (#5671)
Summary:
It sometimes times out when run under valgrind taking around 20m. The patch skips the test under Valgrind.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5671

Differential Revision: D16652382

Pulled By: maysamyabandeh

fbshipit-source-id: 0f6f4f76d37337d56226b689e01b14523dd07aae
2019-08-05 13:35:39 -07:00
Yanqin Jin
30edf1874c Change buckifier to support parameterized dependencies (#5648)
Summary:
Users may desire to specify extra dependencies via buck. This PR allows users to pass additional dependencies as a JSON object so that the buckifier script can generate TARGETS file with desired extra dependencies.

Test plan (on dev server)
```
$python buckifier/buckify_rocksdb.py '{"fake": {"extra_deps": [":test_dep", "//fakes/module:mock1"], "extra_compiler_flags": ["-DROCKSDB_LITE", "-Os"]}}'
Generating TARGETS
Extra dependencies:
{'': {'extra_compiler_flags': [], 'extra_deps': []}, 'test_dep1': {'extra_compiler_flags': ['-O2', '-DROCKSDB_LITE'], 'extra_deps': [':fake', '//dep1/mock']}}
Generated TARGETS Summary:
- 5 libs
- 0 binarys
- 296 tests
```
Verify the TARGETS file.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5648

Differential Revision: D16565043

Pulled By: riversand963

fbshipit-source-id: a6ef02274174fcf159692d7b846e828454d01e89
2019-08-02 10:55:17 -07:00
Zhongyi Xie
d1c9ede195 Fix duplicated file names in PurgeObsoleteFiles (#5603)
Summary:
Currently in `DBImpl::PurgeObsoleteFiles`, the list of candidate files is create through a combination of calling LogFileName using `log_delete_files` and `full_scan_candidate_files`.

In full_scan_candidate_files, the filenames look like this
{file_name = "074715.log", file_path = "/txlogs/3306"},
but LogFileName produces filenames like this that prepends a slash:
{file_name = "/074715.log", file_path = "/txlogs/3306"},

This confuses the dedup step here: bb4178066d/db/db_impl/db_impl_files.cc (L339-L345)

Because duplicates still exist, DeleteFile is called on the same file twice, and hits an error on the second try. Error message: Failed to mark /txlogs/3302/764418.log as trash.

The root cause is the use of `kDumbDbName` when generating file names, it creates file names like /074715.log. This PR removes the use of `kDumbDbName` and create paths without leading '/' when dbname can be ignored.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5603

Test Plan: make check

Differential Revision: D16413203

Pulled By: miasantreble

fbshipit-source-id: 6ba8288382c55f7d5e3892d722fc94b57d2e4491
2019-08-01 15:50:05 -07:00
Levi Tamasi
1dfc5eaab0 Test the various configurations in parallel in MergeOperatorPinningTest (#5659)
Summary:
MergeOperatorPinningTest.Randomized frequently times out under TSAN
because it tests ~40 option configurations sequentially in a loop. The
patch parallelizes the tests of the various configurations to make the
test complete faster.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5659

Test Plan: Tested using buck test mode/dev-tsan ...

Differential Revision: D16587518

Pulled By: ltamasi

fbshipit-source-id: 65bd25c0ad9a23587fed5592e69c1a0097fa27f6
2019-07-31 15:20:26 -07:00
Manuel Ung
f622ca2c7c WriteUnPrepared: savepoint support (#5627)
Summary:
Add savepoint support when the current transaction has flushed unprepared batches.

Rolling back to savepoint is similar to rolling back a transaction. It requires the set of keys that have changed since the savepoint, re-reading the keys at the snapshot at that savepoint, and the restoring the old keys by writing out another unprepared batch.

For this strategy to work though, we must be capable of reading keys at a savepoint. This does not work if keys were written out using the same sequence number before and after a savepoint. Therefore, when we flush out unprepared batches, we must split the batch by savepoint if any savepoints exist.

eg. If we have the following:
```
Put(A)
Put(B)
Put(C)
SetSavePoint()
Put(D)
Put(E)
SetSavePoint()
Put(F)
```

Then we will write out 3 separate unprepared batches:
```
Put(A) 1
Put(B) 1
Put(C) 1
Put(D) 2
Put(E) 2
Put(F) 3
```

This is so that when we rollback to eg. the first savepoint, we can just read keys at snapshot_seq = 1.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5627

Differential Revision: D16584130

Pulled By: lth

fbshipit-source-id: 6d100dd548fb20c4b76661bd0f8a2647e64477fa
2019-07-31 13:39:39 -07:00
Manuel Ung
d599135a03 WriteUnPrepared: use WriteUnpreparedTxnReadCallback for ValidateSnapshot (#5657)
Summary:
In DeferSnapshotSavePointTest, writes were failing with snapshot validation error because the key with the latest sequence number was an unprepared key from the current transaction.

Fix this by passing down the correct read callback.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5657

Differential Revision: D16582466

Pulled By: lth

fbshipit-source-id: 11645dac0e7c1374d917ef5fdf757d13c1d1108d
2019-07-31 10:44:56 -07:00
Eli Pozniansky
4834dab578 Improve CPU Efficiency of ApproximateSize (part 2) (#5609)
Summary:
In some cases, we don't have to get really accurate number. Something like 10% off is fine, we can create a new option for that use case. In this case, we can calculate size for full files first, and avoid estimation inside SST files if full files got us a huge number. For example, if we already covered 100GB of data, we should be able to skip partial dives into 10 SST files of 30MB.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5609

Differential Revision: D16433481

Pulled By: elipoz

fbshipit-source-id: 5830b31e1c656d0fd3a00d7fd2678ddc8f6e601b
2019-07-31 08:50:00 -07:00
Levi Tamasi
b538e756c2 Split the recent block based table changes between 6.3 and 6.4 in HISTORY.md
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/5653

Differential Revision: D16573445

Pulled By: ltamasi

fbshipit-source-id: 19c639044fcfd43b5d5c627c8def33ff2dbb2af8
2019-07-30 17:46:02 -07:00
Fosco Marotto
265db3ebb5 Update history and version for 6.4.0 (#5652)
Summary:
Master branch had been left at 6.2 and history of 6.3 and beyond were merged.  Updated this to correct.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5652

Differential Revision: D16570498

Pulled By: gfosco

fbshipit-source-id: 79f62ec570539a3e3d7d7c84a6cf7b722395fafe
2019-07-30 16:10:06 -07:00
Yanqin Jin
55f4f5486d Update buckifier templates (#5647)
Summary:
Update buckifier templates in the scripts.

Test plan (on devserver)
```
$python buckifier/buckify_rocksdb.py
```
Then
```
$git diff
```
Verify that generated TARGETS file is the same (except for indentation).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5647

Differential Revision: D16555647

Pulled By: riversand963

fbshipit-source-id: 32574a4d0e820858eab2391304dd731141719bcd
2019-07-30 16:00:35 -07:00
Yi Wu
849a8c0ae0 fix sign compare warnings (#5651)
Summary:
Fix -Wsign-compare warnings for gcc9.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5651

Test Plan: Tested with ubuntu19.10+gcc9

Differential Revision: D16567428

fbshipit-source-id: 730b2704d42ba0c4e4ea946a3199bbb34be4c25c
2019-07-30 14:12:54 -07:00
Manuel Ung
399f477818 WriteUnPrepared: Use WriteUnpreparedTxnReadCallback for MultiGet (#5634)
Summary:
The `TransactionTest.MultiGetBatchedTest` were failing with unprepared batches because we were not using the correct callbacks. Override MultiGet to pass down the correct ReadCallback. A similar problem is also fixed in WritePrepared.

This PR also fixes an issue similar to (https://github.com/facebook/rocksdb/pull/5147), but for MultiGet instead of Get.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5634

Differential Revision: D16552674

Pulled By: lth

fbshipit-source-id: 736eaf8e919c6b13d5f5655b1c0d36b57ad04804
2019-07-29 17:56:13 -07:00
haoyuhuang
e648c1d9eb Cache simulator: Optimize hybrid row-block cache. (#5616)
Summary:
This PR optimizes the hybrid row-block cache simulator. If a Get request hits the cache, we treat all its future accesses as hits.

Consider a Get request (no snapshot) accesses multiple files, e.g, file1, file2, file3. We construct the row key as "fdnumber_key_0". Before this PR, if it hits the cache when searching the key in file1, we continue to process its accesses in file2 and file3 which is unnecessary.

With this PR, if "file1_key_0" is in the cache, we treat all future accesses of this Get request as hits.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5616

Differential Revision: D16453187

Pulled By: HaoyuHuang

fbshipit-source-id: 56f3169cc322322305baaf5543226a0824fae19f
2019-07-29 10:58:15 -07:00
Manuel Ung
80d7067cb2 Use int64_t instead of ssize_t (#5638)
Summary:
The ssize_t type was introduced in https://github.com/facebook/rocksdb/pull/5633, but it seems like it's a POSIX specific type.

I just need a signed type to represent number of bytes, so use int64_t instead. It seems like we have a typedef from SSIZE_T for Windows, but it doesn't seem like we ever include "port/port.h" in our public header files.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5638

Differential Revision: D16526269

Pulled By: lth

fbshipit-source-id: 8d3a5c41003951b74b29bc5f1d949b2b22da0cee
2019-07-26 16:36:49 -07:00
Levi Tamasi
3f89af1c39 Reduce the number of random iterations in compact_on_deletion_collector_test (#5635)
Summary:
This test frequently times out under TSAN; reducing the number of random
iterations to make it complete faster.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5635

Test Plan: buck test mode/dev-tsan internal_repo_rocksdb/repo:compact_on_deletion_collector_test

Differential Revision: D16523505

Pulled By: ltamasi

fbshipit-source-id: 6a69909bce9d204c891150fcb3d536547b3253d0
2019-07-26 15:53:34 -07:00
haoyuhuang
70c7302fb5 Block cache simulator: Add pysim to simulate caches using reinforcement learning. (#5610)
Summary:
This PR implements cache eviction using reinforcement learning. It includes two implementations:
1. An implementation of Thompson Sampling for the Bernoulli Bandit [1].
2. An implementation of LinUCB with disjoint linear models [2].

The idea is that a cache uses multiple eviction policies, e.g., MRU, LRU, and LFU. The cache learns which eviction policy is the best and uses it upon a cache miss.
Thompson Sampling is contextless and does not include any features.
LinUCB includes features such as level, block type, caller, column family id to decide which eviction policy to use.

[1] Daniel J. Russo, Benjamin Van Roy, Abbas Kazerouni, Ian Osband, and Zheng Wen. 2018. A Tutorial on Thompson Sampling. Found. Trends Mach. Learn. 11, 1 (July 2018), 1-96. DOI: https://doi.org/10.1561/2200000070
[2] Lihong Li, Wei Chu, John Langford, and Robert E. Schapire. 2010. A contextual-bandit approach to personalized news article recommendation. In Proceedings of the 19th international conference on World wide web (WWW '10). ACM, New York, NY, USA, 661-670. DOI=http://dx.doi.org/10.1145/1772690.1772758
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5610

Differential Revision: D16435067

Pulled By: HaoyuHuang

fbshipit-source-id: 6549239ae14115c01cb1e70548af9e46d8dc21bb
2019-07-26 14:41:13 -07:00
Manuel Ung
41df734830 WriteUnPrepared: Add new variable write_batch_flush_threshold (#5633)
Summary:
Instead of reusing `TransactionOptions::max_write_batch_size` for determining when to flush a write batch for write unprepared, add a new variable called `write_batch_flush_threshold` for this use case instead.

Also add `TransactionDBOptions::default_write_batch_flush_threshold` which sets the default value if `TransactionOptions::write_batch_flush_threshold` is unspecified.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5633

Differential Revision: D16520364

Pulled By: lth

fbshipit-source-id: d75ae5a2141ce7708982d5069dc3f0b58d250e8c
2019-07-26 12:56:26 -07:00
Levi Tamasi
3617287e0e Parallelize db_bloom_filter_test (#5632)
Summary:
This test frequently times out under TSAN; parallelizing it should fix
this issue.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5632

Test Plan:
make check
buck test mode/dev-tsan internal_repo_rocksdb/repo:db_bloom_filter_test

Differential Revision: D16519399

Pulled By: ltamasi

fbshipit-source-id: 66e05a644d6f79c6d544255ffcf6de195d2d62fe
2019-07-26 11:48:17 -07:00
Manuel Ung
230b909da8 Fix PopSavePoint to merge info into the previous savepoint (#5628)
Summary:
Transaction::RollbackToSavePoint undos the modification made since the SavePoint beginning, and also unlocks the corresponding keys, which are tracked in the last SavePoint. Currently ::PopSavePoint simply discard these tracked keys, leaving them locked in the lock manager. This breaks a subsequent ::RollbackToSavePoint behavior as it loses track of such keys, and thus cannot unlock them. The patch fixes ::PopSavePoint by passing on the track key information to the previous SavePoint.
Fixes https://github.com/facebook/rocksdb/issues/5618
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5628

Differential Revision: D16505325

Pulled By: lth

fbshipit-source-id: 2bc3b30963ab4d36d996d1f66543c93abf358980
2019-07-26 11:39:30 -07:00
Yanqin Jin
74782cec32 Fix target 'clean' to include parallel test binaries (#5629)
Summary:
current `clean` target in Makefile does not remove parallel test
binaries. Fix this.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5629

Test Plan:
(on devserver)
Take file_reader_writer_test for instance.
```
$make -j32 file_reader_writer_test
$make clean
```
Verify that binary file 'file_reader_writer_test' is delete by `make clean`.

Differential Revision: D16513176

Pulled By: riversand963

fbshipit-source-id: 70acb9f56c928a494964121b86aacc0090f31ff6
2019-07-26 09:56:09 -07:00
Eli Pozniansky
9625a2bc2b Added SizeApproximationOptions to DB::GetApproximateSizes (#5626)
Summary:
The new DB::GetApproximateSizes with SizeApproximationOptions argument, which allows to add more options/knobs to the DB::GetApproximateSizes call (beyond only the include_flags)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5626

Differential Revision: D16496913

Pulled By: elipoz

fbshipit-source-id: ee8c6c182330a285fa056ecfc3905a592b451720
2019-07-25 22:42:30 -07:00
Yanqin Jin
ae152ee666 Avoid user key copying for Get/Put/Write with user-timestamp (#5502)
Summary:
In previous https://github.com/facebook/rocksdb/issues/5079, we added user-specified timestamp to `DB::Get()` and `DB::Put()`. Limitation is that these two functions may cause extra memory allocation and key copy. The reason is that `WriteBatch` does not allocate extra memory for timestamps because it is not aware of timestamp size, and we did not provide an API to assign/update timestamp of each key within a `WriteBatch`.
We address these issues in this PR by doing the following.
1. Add a `timestamp_size_` to `WriteBatch` so that `WriteBatch` can take timestamps into account when calling `WriteBatch::Put`, `WriteBatch::Delete`, etc.
2. Add APIs `WriteBatch::AssignTimestamp` and `WriteBatch::AssignTimestamps` so that application can assign/update timestamps for each key in a `WriteBatch`.
3. Avoid key copy in `GetImpl` by adding new constructor to `LookupKey`.

Test plan (on devserver):
```
$make clean && COMPILE_WITH_ASAN=1 make -j32 all
$./db_basic_test --gtest_filter=Timestamp/DBBasicTestWithTimestampWithParam.PutAndGet/*
$make check
```
If the API extension looks good, I will add more unit tests.

Some simple benchmark using db_bench.
```
$rm -rf /dev/shm/dbbench/* && TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillseq,readrandom -num=1000000
$rm -rf /dev/shm/dbbench/* && TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillrandom -num=1000000 -disable_wal=true
```
Master is at a78503bd6c.
```
|        | readrandom | fillrandom |
| master | 15.53 MB/s | 25.97 MB/s |
| PR5502 | 16.70 MB/s | 25.80 MB/s |
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5502

Differential Revision: D16340894

Pulled By: riversand963

fbshipit-source-id: 51132cf792be07d1efc3ac33f5768c4ee2608bb8
2019-07-25 15:27:39 -07:00
Chad Austin
0d16fad51b rocksdb: build on macosx
Summary:
Make rocksdb build on macos:
1) Reorganize OS-specific flags and deps in rocksdb/src/TARGETS
2) Sandbox fbcode apple platform builds from repo root include path (which conflicts
    with layout of rocksdb headers).
3) Fix dep-translation for bzip2.

Reviewed By: andrewjcg

Differential Revision: D15125826

fbshipit-source-id: 8e143c689b88b5727e54881a5e80500f879a320b
2019-07-25 11:45:54 -07:00
Maysam Yabandeh
d9dc6b4637 Declare snapshot refresh incompatible with delete range (#5625)
Summary:
The ::snap_refresh_nanos option is incompatible with DeleteRange feature. Currently the code relies on range_del_agg.IsEmpty() to disable it if there are range delete tombstones. However ::IsEmpty does not guarantee that there is no RangeDelete tombstones in the SST files. The patch declares the two features incompatible in inline comments until we later figure how to properly detect the presence of RangeDelete tombstones in compaction inputs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5625

Differential Revision: D16468218

Pulled By: maysamyabandeh

fbshipit-source-id: bd7beca278bc7e1db75e7ee4522d05a3a6ca86f4
2019-07-24 15:22:14 -07:00
sdong
7260347fd1 Auto Roll Logger to add some extra checking to avoid segfault. (#5623)
Summary:
AutoRollLogger sets GetStatus() to be non-OK if the log file fails to be created and logger_ is set to null. It is left to the caller to check the status before calling function to this class. There is no harm to create another null checking to logger_ before we using it, so that in case users mis-use the logger, they don't get a segfault.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5623

Test Plan: Run all existing tests.

Differential Revision: D16466251

fbshipit-source-id: 262b885eec28bf741d91e9191c3cb5ff964e1bce
2019-07-24 15:14:40 -07:00
sdong
5daa426a18 Fix regression bug of Auto rolling logger when handling failures (#5622)
Summary:
Auto roll logger fails to handle file creation error in the correct way, which may expose to seg fault condition to users. Fix it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5622

Test Plan: Add a unit test on creating file under a non-existing directory. The test fails without the fix.

Differential Revision: D16460853

fbshipit-source-id: e96da4bef4f16db171ea04a11b2ec5a9448ddbde
2019-07-24 12:08:40 -07:00
Manuel Ung
66b524a911 Simplify WriteUnpreparedTxnReadCallback and fix some comments (#5621)
Summary:
Simplify WriteUnpreparedTxnReadCallback so we just have one function `CalcMaxVisibleSeq`. Also, there's no need for the read callback to hold onto the transaction any more, so just hold the set of unprep_seqs, reducing about of indirection in `IsVisibleFullCheck`.

Also, some comments about using transaction snapshot were out of date, so remove them.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5621

Differential Revision: D16459883

Pulled By: lth

fbshipit-source-id: cd581323fd18982e817d99af57b6eaba59e599bb
2019-07-24 10:25:26 -07:00
sdong
f5b951f7b6 Fix wrong info log printing for num_range_deletions (#5617)
Summary:
num_range_deletions printing is wrong in this log line:

2019/07/18-12:59:15.309271 7f869f9ff700 EVENT_LOG_v1 {"time_micros": 1563479955309228, "cf_name": "5", "job": 955, "event": "table_file_creation", "file_number": 34579, "file_size": 2239842, "table_properties": {"data_size": 1988792, "index_size": 3067, "index_partitions": 0, "top_level_index_size": 0, "index_key_is_user_key": 0, "index_value_is_delta_encoded": 1, "filter_size": 170821, "raw_key_size": 1951792, "raw_average_key_size": 16, "raw_value_size": 1731720, "raw_average_value_size": 14, "num_data_blocks": 199, "num_entries": 121987, "num_deletions": 15184, "num_merge_operands": 86512, "num_range_deletions": 86512, "format_version": 0, "fixed_key_len": 0, "filter_policy": "rocksdb.BuiltinBloomFilter", "column_family_name": "5", "column_family_id": 5, "comparator": "leveldb.BytewiseComparator", "merge_operator": "PutOperator", "prefix_extractor_name": "rocksdb.FixedPrefix.7", "property_collectors": "[]", "compression": "ZSTD", "compression_options": "window_bits=-14; level=32767; strategy=0; max_dict_bytes=0; zstd_max_train_bytes=0; enabled=0; ", "creation_time": 1563479951, "oldest_key_time": 0, "file_creation_time": 1563479954}}

It actually prints "num_merge_operands" number. Fix it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5617

Test Plan: Just build.

Differential Revision: D16453110

fbshipit-source-id: fc1024b3cd5650312ed47a1379f0d2cf8b2d8a8f
2019-07-23 19:38:16 -07:00
Mark Rambacher
cfcf045acc The ObjectRegistry class replaces the Registrar and NewCustomObjects.… (#5293)
Summary:
The ObjectRegistry class replaces the Registrar and NewCustomObjects.  Objects are registered with the registry by Type (the class must implement the static const char *Type() method).

This change is necessary for a few reasons:
- By having a class (rather than static template instances), the class can be passed between compilation units, meaning that objects could be registered and shared from a dynamic library with an executable.
- By having a class with instances, different units could have different objects registered.  This could be useful if, for example, one Option allowed for a dynamic library and one did not.

When combined with some other PRs (being able to load shared libraries, a Configurable interface to configure objects to/from string), this code will allow objects in external shared libraries to be added to a RocksDB image at run-time, rather than requiring every new extension to be built into the main library and called explicitly by every program.

Test plan (on riversand963's  devserver)
```
$COMPILE_WITH_ASAN=1 make -j32 all && sleep 1 && make check
```
All tests pass.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5293

Differential Revision: D16363396

Pulled By: riversand963

fbshipit-source-id: fbe4acb615bfc11103eef40a0b288845791c0180
2019-07-23 17:13:05 -07:00
Levi Tamasi
092f417037 Move the uncompression dictionary object out of the block cache (#5584)
Summary:
RocksDB has historically stored uncompression dictionary objects in the block
cache as opposed to storing just the block contents. This neccesitated
evicting the object upon table close. With the new code, only the raw blocks
are stored in the cache, eliminating the need for eviction.

In addition, the patch makes the following improvements:

1) Compression dictionary blocks are now prefetched/pinned similarly to
index/filter blocks.
2) A copy operation got eliminated when the uncompression dictionary is
retrieved.
3) Errors related to retrieving the uncompression dictionary are propagated as
opposed to silently ignored.

Note: the patch temporarily breaks the compression dictionary evicition stats.
They will be fixed in a separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5584

Test Plan: make asan_check

Differential Revision: D16344151

Pulled By: ltamasi

fbshipit-source-id: 2962b295f5b19628f9da88a3fcebbce5a5017a7b
2019-07-23 16:01:44 -07:00