Summary:
Universal compaction can involves in multiple levels. However,
the current implementation of bytes_readn and bytes_readnp1
(and some other stats with postfix `n` and `np1`) assumes compaction
can only have two levels.
This patch fixes this bug and redefines bytes_readn and bytes_readnp1:
* bytes_readnp1: the number of bytes read in the compaction output level.
* bytes_readn: the total number of bytes read minus bytes_readnp1
Test Plan: Add a test in compaction_job_stats_test
Reviewers: igor, sdong, rven, anthony, kradhakrishnan, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D40239
Summary:
So far, we benchmarked RocksDB by writing as fast as possible. With this change, we're able to limit our write throughput, which should help us better understand how RocksDB performes under varying write workloads.
Specifically, I'm currently interested in the shape of the graph that has write throughput on one axis and write rate on another. This should help us with designing our stall system, as we have started to do with D36351.
Test Plan:
$ ./db_bench --benchmarks=fillrandom --benchmark_write_rate_limit=1000000
fillrandom : 118.523 micros/op 8437 ops/sec; 0.9 MB/s
$ ./db_bench --benchmarks=fillrandom --benchmark_write_rate_limit=2000000
fillrandom : 59.136 micros/op 16910 ops/sec; 1.9 MB/s
Reviewers: MarkCallaghan, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D39759
Summary:
This diff update DB::CompactRange to use RangeCompactionOptions instead of using multiple parameters
Old CompactRange is still available but deprecated
Test Plan:
make all check
make rocksdbjava
USE_CLANG=1 make all
OPT=-DROCKSDB_LITE make release
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D40209
Summary:
We go to great lengths to make sure MaybeScheduleFlushOrCompaction() is called outside of write thread. But anyway, it's still called in the mutex, so it's not that much cheaper.
This diff removes the "optimization" and cleans up the code a bit.
Test Plan: make check
Reviewers: rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D40113
Summary: Block c_test in ROCKSDB_LITE as it's not supported in ROCKSDB_LITE.
Test Plan: c_test
Reviewers: sdong, rven, anthony, kradhakrishnan, IslamAbdelRahman, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D40257
Summary:
Add an option in GetApproximateSize() so that the result will include estimated sizes in mem tables.
To implement it, implement an estimated count from the beginning to a key in skip list. The approach is to count to find the entry, how many Next() is issued from each level, and sum them with a weight that is <branching factor> ^ <level>.
Test Plan: Add a test case
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D40119
Summary:
This is part of an effort to better understand and optimize RocksDB stalls under high load. I added a feature to db_bench to periodically write QPS to CSV files. That way we can nicely see how our QPS changes in time (especially when DB is stalled) and can do a better job of evaluating our stall system (i.e. we want the QPS to be as constant as possible, as opposed to having bunch of stalls)
Cool part of CSV files is that we can easily graph them -- there are a bunch of tools available.
Test Plan:
Ran ./db_bench --report_interval_seconds=10 --benchmarks=fillrandom --num=10000000
and observed this in report.csv:
secs_elapsed,interval_qps
10,2725860
20,1980480
30,1863456
40,1454359
50,1460389
Reviewers: sdong, MarkCallaghan, rven, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D40047
Summary: Fixed false alarm of size comparison in compaction_job_stats_test
Test Plan: compaction_job_stats_test
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D39921
Summary:
Reverting this diff https://reviews.facebook.net/D39999
Will add an option to force bottom most level compaction and then re submit it
Test Plan: make check
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D40041
Summary: If we don't have a compaction filter then we can skip compacting the bottom most level
Test Plan:
make check
added unit tests
Reviewers: yhchiang, sdong, igor
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D39999
Summary:
We slow down data into the database to the rate of options.delayed_write_rate (a new option) with this patch.
The thread synchronization approach I take is to still synchronize write controller by DB mutex and GetDelay() is inside DB mutex. Try to minimize the frequency of getting time in GetDelay(). I verified it through db_bench and it seems to work
hard_rate_limit is deprecated.
options.delayed_write_rate is still not dynamically changeable. Need to work on it as a follow-up.
Test Plan: Add new unit tests in db_test
Reviewers: yhchiang, rven, kradhakrishnan, anthony, MarkCallaghan, igor
Reviewed By: igor
Subscribers: ikabiljo, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D36351
Summary: With experimental feature SuggestCompactRange() we don't restrict running two L0->L1 compactions in parallel. This diff fixes this.
Test Plan: added a unit test to reproduce the failure. fixed the unit test
Reviewers: yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D39981
Summary:
Adding largest sequence number to FlushJobInfo
and passing flushed file metadata to NotifyOnFlushCompleted which include alot of other values that we may want to expose in FlushJobInfo
Test Plan: make check
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D39927
Summary:
Add Env::GetThreadID(), which returns the ID of the current thread.
In addition, make GetThreadList() and InfoLog use same unique ID for the same thread.
Test Plan:
db_test
listener_test
Reviewers: igor, rven, IslamAbdelRahman, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D39735
Summary:
Right now the level we pass to ReFitLevel is the maximum level with files (before compaction), there are multiple cases where this maximum level have changed after compaction
- all files where in L0 (now maximum level is L1)
- using kCompactionStyleUniversal (now maximum level in the last level)
- level_compaction_dynamic_level_bytes ??
We can handle each of these cases individually, but I felt it's safer to calculate max_level_with_files again if we want to do a ReFitLevel
Test Plan:
adding some tests
make -j64 check
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: ott, dhruba
Differential Revision: https://reviews.facebook.net/D39663
Summary: Some test and benchmark codes don't build for CYGWIN. Fix it.
Test Plan: Build "make all" with TARGET_OS=Cygwin on cygwin and make sure it passes.
Reviewers: rven, yhchiang, anthony, igor, kradhakrishnan
Reviewed By: igor, kradhakrishnan
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D39711
Summary:
When there are files marked for compaction after compactions, print extra messages to help debugging. Example:
2015/06/08-23:12:55.212855 7ff5013ff700 [default] [JOB 121] Generated table #75: 54 keys, 4807 bytes (need compaction)
2015/06/08-23:12:55.556194 7ff5013ff700 (Original Log Time 2015/06/08-23:12:55.556160) [default] compacted to: base level 1 max bytes base
10240 files[0 1 9 32 12 0 0 0] max score 0.96 (2 files need compaction), MB/sec: 0.0 rd, 0.1 wr, level 2, files in(1, 3) out(5) MB in(0.0,
0.0) out(0.0), read-write-amplify(11.3) write-amplify(5.7) OK, records in: 40, records dropped: 0
Test Plan:
Run test and see LOG files.
valgrind test DBTest.TablePropertiesNeedCompactTest
Reviewers: rven, yhchiang, kradhakrishnan, IslamAbdelRahman, igor
Reviewed By: igor
Subscribers: yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D39771
Summary:
There is a hang during DB close in the following scenario:
a) a load with WAL disabled was done,
b) CancelAllBackgroundWork was called,
c) DB Close was called
This was because in that we will wait for a flush but we cannot do a
background flush because we have called CancelAllBackgroundWork which
marks the DB as shutting downn.
Test Plan: Added DBTest FlushOnDestroy
Reviewers: sdong
Reviewed By: sdong
Subscribers: yoshinorim, hermanlee4, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D39747
Summary: We currently issue malloc and free inside DB mutex in GetSnapshot() and ReleaseSnapshot(). Move them out.
Test Plan:
Go through all tests
make valgrind_check
Reviewers: yhchiang, rven, IslamAbdelRahman, anthony, igor
Reviewed By: igor
Subscribers: maykov, hermanlee4, MarkCallaghan, yoshinorim, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D39753
Summary:
Replacing the default value for compaction_filter_factory and compaction_filter_factory_v2 to be nullptr instead of DefaultCompactionFilterFactory / DefaultCompactionFilterFactoryV2
The reason for this is to be able to determine easily if we have compaction filter factory or not without depending on RTTI
Test Plan: make check
Reviewers: yoshinorim, ott, igor, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D39693
Summary: key_sizes claims that 3rd key is of length 8, but it's really only 3. This diff makes it length 8.
Test Plan: asan c_test works again.
Reviewers: sdong, yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D39699
Summary:
It is experimental. Allow users to return from a call back function TablePropertiesCollector::NeedCompact(), based on the data in the file.
It can be used to allow users to suggest DB to clear up delete tombstones faster.
Test Plan: Add a unit test.
Reviewers: igor, yhchiang, kradhakrishnan, rven
Reviewed By: rven
Subscribers: yoshinorim, MarkCallaghan, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D39585
Summary:
EventListener::OnFlushCompleted() now passes a structure instead
of a list of parameters. This minimizes the API change in the
future.
Test Plan:
listener_test
compact_files_test
example/compact_files_example
Reviewers: kradhakrishnan, sdong, IslamAbdelRahman, rven, igor
Reviewed By: rven, igor
Subscribers: IslamAbdelRahman, rven, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D39543
Summary: I encountered an issue where the database hang, it looks like the mutex is not unlocked on return in ReFitLevel function
Test Plan: make -j64 check
Reviewers: yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D39609
Summary:
The type of smallest_output_key_prefix and largest_output_key_prefix
have been changed to std::string in https://reviews.facebook.net/D39537.
As a result, we shouldn't do smallest_output_key_prefix[0] = 0 in the
initialization.
Test Plan: compile db_test with tsan enabled and repeat DBTest.CompactionDeletionTrigger test to verify the tsan issue has been gone.
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D39645
Summary:
This diff updates the logic of how we do trivial move, now trivial move can run on any number of files in input level as long as they are not overlapping
The conditions for trivial move have been updated
Introduced conditions:
- Trivial move cannot happen if we have a compaction filter (except if the compaction is not manual)
- Input level files cannot be overlapping
Removed conditions:
- Trivial move only run when the compaction is not manual
- Input level should can contain only 1 file
More context on what tests failed because of Trivial move
```
DBTest.CompactionsGenerateMultipleFiles
This test is expecting compaction on a file in L0 to generate multiple files in L1, this test will fail with trivial move because we end up with one file in L1
```
```
DBTest.NoSpaceCompactRange
This test expect compaction to fail when we force environment to report running out of space, of course this is not valid in trivial move situation
because trivial move does not need any extra space, and did not check for that
```
```
DBTest.DropWrites
Similar to DBTest.NoSpaceCompactRange
```
```
DBTest.DeleteObsoleteFilesPendingOutputs
This test expect that a file in L2 is deleted after it's moved to L3, this is not valid with trivial move because although the file was moved it is now used by L3
```
```
CuckooTableDBTest.CompactionIntoMultipleFiles
Same as DBTest.CompactionsGenerateMultipleFiles
```
This diff is based on a work by @sdong https://reviews.facebook.net/D34149
Test Plan: make -j64 check
Reviewers: rven, sdong, igor
Reviewed By: igor
Subscribers: yhchiang, ott, march, dhruba, sdong
Differential Revision: https://reviews.facebook.net/D34797
Summary:
Keys in RocksDB can be arbitrary byte strings. However, in the current
CompactionJobStats, smallest_output_key_prefix and largest_output_key_prefix
are of type char[] without having a length, which is insufficient to handle
non-null terminated strings.
This patch change their type to std::string.
Test Plan: compaction_job_stats_test
Reviewers: igor, rven, IslamAbdelRahman, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D39537
Summary:
Add EventListener::OnTableFileDeletion(), which will be
called when a table file is deleted.
Test Plan: Extend three existing tests in db_test to verify the deleted files.
Reviewers: rven, anthony, kradhakrishnan, igor, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38931
Summary: We need to start doing some CI on Macs.
Test Plan: works now
Reviewers: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D39489
Summary:
DBTest.MigrateToDynamicLevelMaxBytesBase with valgrind test is
extremely slow. Work it around by not having both threads running
everything non-stop.
Test Plan: Run the test with valgrind which used to take too long to finish and see it finish in reasonable time.
Reviewers: yhchiang, anthony, rven, kradhakrishnan, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D39477
Summary: Remove a TODO that has been done
Test Plan: make
Reviewers: sdong, igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D39429
Summary:
Allow EventListener::OnCompactionCompleted to return CompactionJobStats,
which contains useful information about a compaction.
Example CompactionJobStats returned by OnCompactionCompleted():
smallest_output_key_prefix 05000000
largest_output_key_prefix 06990000
elapsed_time 42419
num_input_records 300
num_input_files 3
num_input_files_at_output_level 2
num_output_records 200
num_output_files 1
actual_bytes_input 167200
actual_bytes_output 110688
total_input_raw_key_bytes 5400
total_input_raw_value_bytes 300000
num_records_replaced 100
is_manual_compaction 1
Test Plan: Developed a mega test in db_test which covers 20 variables in CompactionJobStats.
Reviewers: rven, igor, anthony, sdong
Reviewed By: sdong
Subscribers: tnovak, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38463
Summary:
Fixed the following compile warning in listener_test.cc:
db/listener_test.cc:214:8: error: 'OnTableFileCreated' overrides a member function but is not marked 'override' [-Werror,-Winconsistent-missing-override]
14:16:46 void OnTableFileCreated(
Test Plan:
make listener_test
Reviewers: sdong, igor
Subscribers: leveldb
Summary:
Add EventListener::OnTableFileCreated(), which will be called
when a table file is created. This patch is part of the
EventLogger and EventListener integration.
Test Plan: Augment existing test in db/listener_test.cc
Reviewers: anthony, kradhakrishnan, rven, igor, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38865
Summary: Add a stats counter for DB_WRITE back which was mistakenly removed.
Test Plan: augment GroupCommitTest
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D39399
Summary:
We occasionally get write stalls (>1s Write() calls) on HDD under read load. The following timers explain almost all of the stalls:
- perf_context.db_mutex_lock_nanos
- perf_context.db_condition_wait_nanos
- iostats_context.open_time
- iostats_context.allocate_time
- iostats_context.write_time
- iostats_context.range_sync_time
- iostats_context.logger_time
In my experiments each of these occasionally takes >1s on write path under some workload. There are rare cases when Write() takes long but none of these takes long.
Test Plan: Added code to our application to write the listed timings to log for slow writes. They usually add up to almost exactly the time Write() call took.
Reviewers: rven, yhchiang, sdong
Reviewed By: sdong
Subscribers: march, dhruba, tnovak
Differential Revision: https://reviews.facebook.net/D39177
Summary: In DB::CompactRange(), change parameter "reduce_level" to "change_level". Users can compact all data to the last level if needed. By doing it, users can migrate the DB to options.level_compaction_dynamic_level_bytes=true.
Test Plan: Add a unit test for it.
Reviewers: yhchiang, anthony, kradhakrishnan, igor, rven
Reviewed By: rven
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D39099
Summary:
DBImpl::notifying_events_ is a internal counter in DBImpl which is
used to prevent DB close when DB is notifying events. However, as
the current events all rely on either compaction or flush which
already have similar counters to prevent DB close, it is safe to
remove notifying_events_.
Test Plan:
listener_test
examples/compact_files_example
Reviewers: igor, anthony, kradhakrishnan, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D39315
Summary: Broken by optimistic transaction diff. (I only built 'release' not 'static_lib' when testing).
Test Plan: build
Reviewers: yhchiang, sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D39219
Summary: Optimistic transactions supporting begin/commit/rollback semantics. Currently relies on checking the memtable to determine if there are any collisions at commit time. Not yet implemented would be a way of enuring the memtable has some minimum amount of history so that we won't fail to commit when the memtable is empty. You should probably start with transaction.h to get an overview of what is currently supported.
Test Plan: Added a new test, but still need to look into stress testing.
Reviewers: yhchiang, igor, rven, sdong
Reviewed By: sdong
Subscribers: adamretter, MarkCallaghan, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D33435
Summary:
For transactions, we are using the memtables to validate that there are no write conflicts. But after flushing, we don't have any memtables, and transactions could fail to commit. So we want to someone keep around some extra history to use for conflict checking. In addition, we want to provide a way to increase the size of this history if too many transactions fail to commit.
After chatting with people, it seems like everyone prefers just using Memtables to store this history (instead of a separate history structure). It seems like the best place for this is abstracted inside the memtable_list. I decide to create a separate list in MemtableListVersion as using the same list complicated the flush/installalflushresults logic too much.
This diff adds a new parameter to control how much memtable history to keep around after flushing. However, it sounds like people aren't too fond of adding new parameters. So I am making the default size of flushed+not-flushed memtables be set to max_write_buffers. This should not change the maximum amount of memory used, but make it more likely we're using closer the the limit. (We are now postponing deleting flushed memtables until the max_write_buffer limit is reached). So while we might use more memory on average, we are still obeying the limit set (and you could argue it's better to go ahead and use up memory now instead of waiting for a write stall to happen to test this limit).
However, if people are opposed to this default behavior, we can easily set it to 0 and require this parameter be set in order to use transactions.
Test Plan: Added a xfunc test to play around with setting different values of this parameter in all tests. Added testing in memtablelist_test and planning on adding more testing here.
Reviewers: sdong, rven, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D37443
Summary:
Rename EventLoggerHelpers EventHelpers, as it's going to include
all event-related helper functions instead of EventLogger only stuffs.
Test Plan: make
Reviewers: sdong, rven, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D39093
Summary:
Compaction now boosts the size of deletion entries of a file only when
the number of deletion entries is greater than the number of non-deletion
entries in the file. The motivation here is that in a stable workload,
the number of deletion entries should be roughly equal to the number of
non-deletion entries. If we compensate the size of deletion entries in a
stable workload, the deletion compensation logic might introduce unwanted
effet which changes the shape of LSM tree.
Test Plan: db_test --gtest_filter="*Deletion*"
Reviewers: sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38703
Summary:
Fixed a missing "}" at the end of the generated JSON Log
in EventLoggerHelpers::LogTableFileCreation.
Test Plan: db_bench
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38919
Summary: Removed an unused private variable in db_impl.h
Test Plan: make db_test
Reviewers: sdong, anthony, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38925
Summary: We have a bug where we don't report the last level's files as being compacted. This fixes it.
Test Plan: See the fix in action here: https://phabricator.fb.com/P19845738
Reviewers: MarkCallaghan, sdong
Reviewed By: sdong
Subscribers: yhchiang, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38727
Summary:
This patch fixes the following two bugs on logging file deletion.
1. Previously, file deletion failure was only logged in INFO_LEVEL.
This patch changes it to ERROR_LEVEL and does some code clean.
2. EventLogger previously will always generate the same log on
table file deletion even when file deletion is not successful.
Now the resulting status of file deletion will also be logged.
Test Plan: make all check
Reviewers: sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38817
Summary: Ensure ColumnFamilyOptions.num_levels >= 2 when level compaction is used.
Test Plan: Extend SanitizeOptions test in column_family_test
Reviewers: sdong, rven, anthony, krishnanm86, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38829
Summary: Avoid logging under mutex in DBImpl::WriteLevel0TableForRecovery().
Test Plan: make all check
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38823
Summary:
Allow EventLogger to directly log from a JSONWriter. This allows
the JSONWriter to be shared by EventLogger and potentially EventListener,
which is an important step to integrate EventLogger and EventListener.
This patch also rewrites EventLoggerHelpers::LogTableFileCreation(),
which uses the new API to generate identical log.
Test Plan:
Run db_bench in debug mode and make sure the log is correct and no
assertions fail.
Reviewers: sdong, anthony, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38709
Summary:
This turns out to be pretty bad because if we prioritize L0->L1 then L1 can grow artificially large, which makes L0->L1 more and more expensive. For example:
256MB @ L0 + 256MB @ L1 --> 512MB @ L1
256MB @ L0 + 512MB @ L1 --> 768MB @ L1
256MB @ L0 + 768MB @ L1 --> 1GB @ L1
....
256MB @ L0 + 10GB @ L1 --> 10.2GB @ L1
At some point we need to start compacting L1->L2 to speed up L0->L1.
Test Plan:
The performance improvement is massive for heavy write workload. This is the benchmark I ran: https://phabricator.fb.com/P19842671. Before this change, the benchmark took 47 minutes to complete. After, the benchmark finished in 2minutes. You can see full results here: https://phabricator.fb.com/P19842674
Also, we ran this diff on MongoDB on RocksDB on one replicaset. Before the change, our initial sync was so slow that it couldn't keep up with primary writes. After the change, the import finished without any issues
Reviewers: dynamike, MarkCallaghan, rven, yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38637
Summary: Dump db stats in WARN level
Test Plan: run db_bench and verify the LOG
Reviewers: igor, MarkCallaghan
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38691
Summary:
See https://gist.github.com/mdcallag/89ebb2b8cbd331854865 for the IO stats.
I added "Cumulative compaction:" and "Interval compaction:" lines. The IO rates
can be confusing. Rates fro per-level stats lines, Wr(MB/s) & Rd(MB/s), are computed
using the duration of the compaction job. If the job reads 10MB, writes 9MB and the job
(IO & merging) takes 1 second then the rates are 10MB/s for read and 9MB/s for writes.
The IO rates in the Cumulative compaction line uses the total uptime. The IO rates in the
Interval compaction line uses the interval uptime. So these Cumalative & Interval
compaction IO rates cannot be compared to the per-level IO rates. But both forms of
the rates are useful for debugging perf.
Task ID: #
Blame Rev:
Test Plan:
run db_bench
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D38667
Summary: Not sure why this fails on some compilers and doesn't on others.
Test Plan: none
Reviewers: meyering, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38673
Summary:
sync_file_range is not always asyncronous and thus can block writes if we do this for WAL in the foreground thread. See more here: http://yoshinorimatsunobu.blogspot.com/2014/03/how-syncfilerange-really-works.html
Some users don't want us to call sync_file_range on WALs. Some other do.
Thus, I'm adding a separate option wal_bytes_per_sync to control calling
sync_file_range on WAL files. bytes_per_sync will apply only to table
files now.
Test Plan: no more sync_file_range for WAL as evidenced by strace
Reviewers: yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38253
Summary: As title. I spent some time thinking about it and I don't think there should be any issue with running manual compaction and flushes in parallel
Test Plan: make check works
Reviewers: rven, yhchiang, sdong
Reviewed By: yhchiang, sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38355
Summary: DBTest.DynamicLevelMaxBytesCompactRange needs to make sure L0 is not empty to properly cover the code paths we want to cover. However, current codes have a bug that might leave the condition not held. Improve the test to ensure it.
Test Plan: Run the test in an environment that is used to fail. Also run it many times.
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D38631
Summary: CompactRange() now is much more expensive for dynamic level base size as it goes through all the levels. Skip those not used levels between level 0 an base level.
Test Plan: Run all unit tests
Reviewers: yhchiang, rven, anthony, kradhakrishnan, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D37125
Summary:
Allow GetThreadList to report Flush properties, which includes:
* job id
* number of bytes that has been written since flush started.
* total size of input mem-tables
Test Plan:
./db_bench --threads=30 --num=1000000 --benchmarks=fillrandom --thread_status_per_interval=100 --value_size=1000
Sample output from db_bench which tracks same flush job
ThreadID ThreadType cfName Operation ElapsedTime Stage State OperationProperties
140213879898240 High Pri default Flush 5789 us FlushJob::WriteLevel0Table BytesMemtables 4112835 | BytesWritten 577104 | JobID 8 |
ThreadID ThreadType cfName Operation ElapsedTime Stage State OperationProperties
140213879898240 High Pri default Flush 30.634 ms FlushJob::WriteLevel0Table BytesMemtables 4112835 | BytesWritten 1734865 | JobID 8 |
Reviewers: rven, igor, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38505
Summary:
When trying to compact entire database with SuggestCompactRange(), we'll first try the left-most files. This is pretty bad, because:
1) the left part of LSM tree will be overly compacted, but right part will not be touched
2) First compaction will pick up the left-most file. Second compaction will try to pick up next left-most, but this will not be possible, because there's a big chance that second's file range on N+1 level is already being compacted.
I observe both of those problems when running Mongo+RocksDB and trying to compact the DB to clean up tombstones. I'm unable to clean them up :(
This diff adds a bit of randomness into choosing a file. First, it chooses a file at random and tries to compact that one. This should solve both problems specified here.
Test Plan: make check
Reviewers: yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38379
Summary: DBTest.DynamicLevelMaxBytesBase2 has a check that is not necessary and may fail. Remove it, and add two unrelated check.
Test Plan: Run the test
Reviewers: yhchiang, rven, kradhakrishnan, anthony, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D38457
Summary: Universal compactions with multiple levels should use file preallocation size based on file size if output level is not level 0
Test Plan: Run all tests.
Reviewers: igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D38439
Summary: Add --rate_limiter_bytes_per_sec to db_bench to allow rater limit to disk
Test Plan:
Run
./db_bench --benchmarks=fillseq --num=30000000 --rate_limiter_bytes_per_sec=3000000 --num_multi_db=8 -disable_wal
And see io_stats to have the rate limited.
Reviewers: yhchiang, rven, anthony, kradhakrishnan, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D38385
Summary:
Fixed the following compile error in db/column_family.cc
db/column_family.cc:633:33: error: ‘ASSERT_GT’ was not declared in this scope
16:14:45 ASSERT_GT(listeners.size(), 0U);
Test Plan: make db_test
Reviewers: igor, sdong, rven
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38367
Summary:
Fixed a bug in EventListener::OnCompactionCompleted() that returns
incorrect list of input / output file names.
Test Plan: Extend existing test in listener_test.cc
Reviewers: sdong, rven, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38349
Summary: This caused a crash of our MongoDB + RocksDB instance. PickCompactionBySize() sets its own parent_index. We never reset this parent_index when picking PickFilesMarkedForCompactionExperimental(). So we might end up doing SetupOtherInputs() with parent_index that was set by PickCompactionBySize, although we're using compaction calculated using PickFilesMarkedForCompactionExperimental.
Test Plan: Added a unit test that fails with assertion on master.
Reviewers: yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38337
Summary:
Added a couple functions to WriteBatchWithIndex to make it easier to query the value of a key including reading pending writes from a batch. (This is needed for transactions).
I created write_batch_with_index_internal.h to use to store an internal-only helper function since there wasn't a good place in the existing class hierarchy to store this function (and it didn't seem right to stick this function inside WriteBatchInternal::Rep).
Since I needed to access the WriteBatchEntryComparator, I moved some helper classes from write_batch_with_index.cc into write_batch_with_index_internal.h/.cc. WriteBatchIndexEntry, ReadableWriteBatch, and WriteBatchEntryComparator are all unchanged (just moved to a different file(s)).
Test Plan: Added new unit tests.
Reviewers: rven, yhchiang, sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38037
Summary: In new clang we need to add override to every overriden function
Test Plan: none
Reviewers: rven
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D38259
Summary: When reporting compaction that was started because of SuggestCompactRange() we should treat it as manual compaction.
Test Plan: none
Reviewers: yhchiang, rven
Reviewed By: rven
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38139
Summary:
Couple changes:
1. instead of SnapshotList, just take a vector of snapshots
2. don't take a separate parameter is_snapshots_supported. If there are snapshots in the list, that means they are supported. I actually think we should get rid of this notion of snapshots not being supported.
3. don't pass in mutable_cf_options as a parameter. Lifetime of mutable_cf_options is a bit tricky to maintain, so it's better to not pass it in for the whole compaction job. We only really need it when we install the compaction results.
Test Plan: make check
Reviewers: sdong, rven, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D36627
Summary:
Fixes#6840824, running "make check" on centos6 hits
a deadlock in column_family_test
Test Plan:
seq 10000 | parallel --gnu --eta 't=/dev/shm/rdb-{}; rm -rf
$t; mkdir $t && export TEST_TMPDIR=$t; ./column_family_test > $t/log-{}'
Made the test deterministic by narrrowing the window for the flush.
Reviewers: igor, meyering
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38079
Summary: Optimize GetRange Function by checking the level of the files
Test Plan: pass make all check
Reviewers: rven, yhchiang, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D37977
Summary:
[noticed a new warning when building with the very latest gcc]
* db/memtablerep_bench.cc (FLAGS_env): Remove declaration
of unused varaible, to avoid this warning/error:
db/memtablerep_bench.cc:135:22: error: ‘FLAGS_env’ defined but not\
used [-Werror=unused-variable]
static rocksdb::Env* FLAGS_env = rocksdb::Env::Default();
^
Test Plan: compile
Reviewers: ljin, rven, igor.sugak, yhchiang, sdong, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D37983
Summary:
The default, use one iter for the whole test, isn't good. This cost me
a few hours of debugging and a few days of tessting. For readonly
that isn't realistic and for read-write that keeps a lot of old sst files around.
I remove the option because nothing uses it and not calling gettimeofday per
loop iteration adds about 3% to QPS at 20 threads.
Task ID: #
Blame Rev:
Test Plan:
run db_bench
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D37965
Summary:
CPU profiling reveals GetApproximateSizes as a bottleneck for performance. The current implementation is sub-optimal, it scans every file in every level to compute the result.
We can take advantage of the fact that all levels above 0 are sorted in the increasing order of key ranges and use binary search to locate the starting index. This can reduce the number of comparisons required to compute the result.
Test Plan: We have good test coverage. Run the tests.
Reviewers: sdong, igor, rven, dynamike
Subscribers: dynamike, maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D37755
Summary: Before the fix we also marked the bottommost level for compaction. This is wrong because then RocksDB has N+1 levels instead of N as before the compaction.
Test Plan: SuggestCompactRangeTest in db_test
Reviewers: yhchiang, rven
Reviewed By: rven
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D37869
Summary: Remove duplicate code. If this diff looks good, I will cleanup other call sites as well.
Test Plan: unit tests
Reviewers: rven, yhchiang, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D37761
Summary:
Added these events:
* Recovery start, finish and also when recovery creates a file
* Trivial move
* Compaction start, finish and when compaction creates a file
* Flush start, finish
Also includes small fix to EventLogger
Also added option ROCKSDB_PRINT_EVENTS_TO_STDOUT which is useful when we debug things. I've spent far too much time chasing LOG files.
Still didn't get sst table properties in JSON. They are written very deeply into the stack. I'll address in separate diff.
TODO:
* Write specification. Let's first use this for a while and figure out what's good data to put here, too. After that we'll write spec
* Write tools that parse and analyze LOGs. This can be in python or go. Good intern task.
Test Plan: Ran db_bench with ROCKSDB_PRINT_EVENTS_TO_STDOUT. Here's the output: https://phabricator.fb.com/P19811976
Reviewers: sdong, yhchiang, rven, MarkCallaghan, kradhakrishnan, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D37521
Summary:
Make it build for CYGWIN.
Need to define "-std=gnu++11" instead of "-std=c++11" and use some replacement functions.
Test Plan: Build it and run some unit tests in CYGWIN
Reviewers: yhchiang, rven, anthony, kradhakrishnan, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D37605
Summary:
CompactRange for universal compaction with num_levels > 1 seems to have a bug. The unit test also has a bug so it doesn't capture the problem.
Fix it. Revert the compact range to the logic equivalent to num_levels=1. Always compact all files together.
It should also fix DBTest.IncreaseUniversalCompactionNumLevels. The issue was that options.write_buffer_size = 100 << 10 and options.write_buffer_size = 100 << 10 are not used in later test scenarios. So write_buffer_size of 4MB was used. The compaction trigger condition is not anymore obvious as expected.
Test Plan: Run the new test and all test suites
Reviewers: yhchiang, rven, kradhakrishnan, anthony, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D37551
Summary:
Based on feedback from D37083.
Are all of these correct? In some spaces it seems like we're doing SetMaxPossibleForUserKey() although we want the smallest possible internal key for user key.
Test Plan: make check
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D37341
Summary: Reading CompactionPicker I noticed this dangerous substraction of two unsigned integers. We should assert to mark this as safe.
Test Plan: make check
Reviewers: anthony, rven, yhchiang, sdong
Reviewed By: sdong
Subscribers: kradhakrishnan, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D37041
Summary:
This diff implements a new `DB` method `PromoteL0` which moves all files in L0
to a given level skipping compaction, provided that the files have disjoint
ranges and all levels up to the target level are empty.
This method provides finer-grain control for trivial compactions, and it is
useful for bulk-loading pre-sorted keys. Compared to D34797, it does not change
the semantics of an existing operation, which can impact existing code.
PromoteL0 is designed to work well in combination with the proposed
`GetSstFileWriter`/`AddFile` interface, enabling to "design" the level structure
by populating one level at a time. Such fine-grained control can be very useful
for static or mostly-static databases.
Test Plan: `make check`
Reviewers: IslamAbdelRahman, philipp, MarkCallaghan, yhchiang, igor, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D37107
Summary: Add more logging to help debugging issues.
Test Plan: Run test suites
Reviewers: yhchiang, rven, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D37401
Summary: To further distinguish the corruption cases were caused by storage media or in memory states when writing it, add a paranoid check after writing the file to iterate all the rows.
Test Plan: Add a new unit test for it
Reviewers: rven, igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D37335
Summary:
A couple of times on Travis, we have had the thread status say that there were no compactions done and since we assert for it, the test failed.
We now fix this by waiting till compaction started.
Test Plan:
run DBTEST::*PreShutdown*
d=/tmp/j; rm -rf $d; seq 200 | parallel --gnu --eta 'd=/tmp/j/d-{}; mkdir -p $d; TEST_TMPDIR=$d ./db_test --gtest_filter=DBTest.PreShutdown* >& '$d'/log-{}'
Reviewers: sdong, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D37545
Summary:
Some Mongo+Rocks datasets in Parse's environment are not doing compactions very frequently. During the quiet period (with no IO), we'd like to schedule compactions so that our reads become faster. Also, aggressively compacting during quiet periods helps when write bursts happen. In addition, we also want to compact files that are containing deleted key ranges (like old oplog keys).
All of this is currently not possible with CompactRange() because it's single-threaded and blocks all other compactions from happening. Running CompactRange() risks an issue of blocking writes because we generate too much Level 0 files before the compaction is over. Stopping writes is very dangerous because they hold transaction locks. We tried running manual compaction once on Mongo+Rocks and everything fell apart.
MarkForCompaction() solves all of those problems. This is very light-weight manual compaction. It is lower priority than automatic compactions, which means it shouldn't interfere with background process keeping the LSM tree clean. However, if no automatic compactions need to be run (or we have extra background threads available), we will start compacting files that are marked for compaction.
Test Plan: added a new unit test
Reviewers: yhchiang, rven, MarkCallaghan, sdong
Reviewed By: sdong
Subscribers: yoshinorim, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D37083
Summary:
The usage I'm fixing here caused trouble on Fedora 21 when
compiling with the current gcc version 4.9.2 20150212 (Red Hat 4.9.2-6) (GCC):
db/write_controller_test.cc: In member function ‘virtual void rocksdb::WriteControllerTest_SanityTest_Test::TestBody()’:
db/write_controller_test.cc:23:165: error: converting ‘false’ to pointer type for argument 1 of ‘char testing::internal::IsNullLiteralHelper(testing::internal::Secret*)’ [-Werror=conversion-null]
ASSERT_EQ(false, controller.IsStopped());
^
This change was induced mechanically via:
git grep -l -E 'ASSERT_EQ\(false'|xargs perl -pi -e 's/ASSERT_EQ\(false, /ASSERT_FALSE(/'
git grep -l -E 'ASSERT_EQ\(true'|xargs perl -pi -e 's/ASSERT_EQ\(true, /ASSERT_TRUE(/'
Except for the three in utilities/backupable/backupable_db_test.cc for which
I ended up reformatting (joining lines) in the result.
As for why this problem is exhibited with that version of gcc, and none
of the others I've used (from 4.8.1 through gcc-5.0.0 and newer), I suspect
it's a bug in F21's gcc that has been fixed in gcc-5.0.0.
Test Plan:
"make" now succeed on Fedora 21
Reviewers: ljin, rven, igor.sugak, yhchiang, sdong, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D37329
Summary: this is not used anywhere
Test Plan: compiles
Reviewers: yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D37053
Summary: If ExpandWhileOverlapping() we don't clear inputs. That's a bug introduced by my recent patch https://reviews.facebook.net/D36687. However, we have no tests covering ExpandWhileOverlapping(). I created a task t6771252 to add ExpandWhileOverlapping() tests.
Test Plan: make check
Reviewers: sdong, rven, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D37077
Summary: D36669 introduces a bug that trivial moved data is not going to specific level but the next level, which will incorrectly be level 1 for level 0 compaciton if base level is not level 1. Fixing it by appreciating the output level
Test Plan: Run all tests
Reviewers: MarkCallaghan, rven, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D37119
Summary:
Recent change of DBTest.DynamicLevelCompressionPerLevel2 has a bug that the second sync point is not enabled. Fix it. Also add an assert for that.
Also, flush compression is not tracked in the test. Add it.
Test Plan: Build everything
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D37101
Summary: When commiting the sync point interface change, didn't resolve the new occurance of the old interface in rebase. Fix it.
Test Plan: Build and see it pass
Reviewers: igor, yhchiang, rven, anthony, kradhakrishnan
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D37095
Summary:
Allow users to give a callback function with parameter using sync point, so more complicated verification can be done in tests.
Use it in DBTest.DynamicLevelCompressionPerLevel2 so that failures will be more easy to debug.
Test Plan: Run all tests. Run DBTest.DynamicLevelCompressionPerLevel2 with valgrind check.
Reviewers: rven, yhchiang, anthony, kradhakrishnan, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D36999
Summary: https://reviews.facebook.net/D36963 made the debug build much faster and that triggered failures of CompactFilesOnLevelCompaction test. 3 out of 4 last tests on Jenkins failed. I'm disabling this test temporarily, since we likely know the reason why it's failing and there's already work in progress to address it -- https://reviews.facebook.net/D36225
Test Plan: none
Reviewers: sdong, rven, yhchiang, meyering
Reviewed By: meyering
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D36993
Summary: We should use mocked-out env for these tests to make it more realiable. Added benefit is that instead of actually sleeping for 3 seconds, we can instead pretend to sleep and just increase time counters.
Test Plan: for i in `seq 100`; do ./wal_manager_test --gtest_filter=WalManagerTest.WALArchivalTtl ;done
Reviewers: rven, meyering
Reviewed By: meyering
Subscribers: meyering, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D36951
Summary:
The problem is that sometimes two memtables will be compacted together into a single file. In that case, our assertion
ASSERT_EQ(NumTableFilesAtLevel(0), 5);
fails because same amount of data is in 4 files instead of 5. We should wait for flush so that we prevent two memtables merging into a single file.
Test Plan: `for i in `seq 20`; do mrtest FIFOCompactionTest; done` -- fails at least once before. fails zero times after.
Reviewers: rven
Reviewed By: rven
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D36939
Summary:
1. it doesn't work
2. we're not using it
In the future, if we need general benchmark framework, we should probably use https://github.com/google/benchmark
Test Plan: make all
Reviewers: yhchiang, rven, anthony, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D36777
Summary:
The goal of this diff is to make Compaction class easier to use. This should also make new compaction algorithms easier to write (like CompactFiles from @yhchiang and dynamic leveled and multi-leveled universal from @sdong).
Here are couple of things demonstrating that Compaction class is hard to use:
1. we have two constructors of Compaction class
2. there's this thing called grandparents_, but it appears to only be setup for leveled compaction and not compactfiles
3. it's easy to introduce a subtle and dangerous bug like this: D36225
4. SetupBottomMostLevel() is hard to understand and it shouldn't be. See this comment: afbafeaeae/db/compaction.cc (L236-L241). It also made it harder for @yhchiang to write CompactFiles, as evidenced by this: afbafeaeae/db/compaction_picker.cc (L204-L210)
The problem is that we create Compaction object, which holds a lot of state, and then pass it around to some functions. After those functions are done mutating, then we call couple of functions on Compaction object, like SetupBottommostLevel() and MarkFilesBeingCompacted(). It is very hard to see what's happening with all that Compaction's state while it's travelling across different functions. If you're writing a new PickCompaction() function you need to try really hard to understand what are all the functions you need to run on Compaction object and what state you need to setup.
My proposed solution is to make important parts of Compaction immutable after construction. PickCompaction() should calculate compaction inputs and then pass them onto Compaction object once they are finalized. That makes it easy to create a new compaction -- just provide all the parameters to the constructor and you're done. No need to call confusing functions after you created your object.
This diff doesn't fully achieve that goal, but it comes pretty close. Here are some of the changes:
* have one Compaction constructor instead of two.
* inputs_ is constant after construction
* MarkFilesBeingCompacted() is now private to Compaction class and automatically called on construction/destruction.
* SetupBottommostLevel() is gone. Compaction figures it out on its own based on the input.
* CompactionPicker's functions are not passing around Compaction object anymore. They are only passing around the state that they need.
Test Plan:
make check
make asan_check
make valgrind_check
Reviewers: rven, anthony, sdong, yhchiang
Reviewed By: yhchiang
Subscribers: sdong, yhchiang, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D36687
Summary: Need to remember to unref MemTableList->current() before deleting.
Test Plan: ran test with valgrind
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D36855
Summary:
Test failing due to a missing directory caused by a simple bug (did not run into this on my dev box since the path already existed).
We should look into deleting test::TmpDir() before each test run.
Test Plan: ran test
Reviewers: igor, yhchiang, meyering, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D36831
Summary:
Fixed xfunc related compile errors in ROCKSDB_LITE
Now make OPT=-DROCKSDB_LITE shared_lib -j32 would work
Test Plan:
make clean
make OPT=-DROCKSDB_LITE shared_lib -j32
make clean
make OPT=-DROCKSDB_LITE static_lib -j32
Reviewers: sdong, igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D36825
Summary: Add tests for MemTableList
Test Plan: run test
Reviewers: yhchiang, kradhakrishnan, sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D36735
Summary:
Fix a compile error in ROCKSDB_LITE in db/db_impl.cc
related to internal_stats.
Test Plan: make OPT=-DROCKSDB_LITE shared_lib
Reviewers: sdong, igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D36819
Summary:
Fix a compilation error in ROCKSDB_LITE in db/internal_stats.h
Other compilation errors will be fixed in a separate diff.
Test Plan: make OPT=-DROCKSDB_LITE
Reviewers: sdong, igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D36807
Summary:
Add a test case:
Write some keys without sync, flush, write other keys and do sync. Before flush finishes, host crashes and unsync data is dropped.
Tag the new test as disabled since it is not passing.
Test Plan: Run the test
Reviewers: MarkCallaghan, rven, anthony, igor, kradhakrishnan
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D36741
Summary:
This fixes two problems:
1) the env should not be created twice when use_existing_db is false
2) the env dtor should run before cachedev_fd_ is closed.
Task ID: #
Blame Rev:
Test Plan:
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D36795
Summary: Other than making some class members private, this is a documentation-only change
Test Plan: unit tests
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D36567
Summary: Now EnvOptions uses unsanitized DB options. bytes_per_sync is tuned off when rate_limiter is used, but this change doesn't take effort.
Test Plan: See different I/O pattern in db_bench running fillseq.
Reviewers: yhchiang, kradhakrishnan, rven, anthony, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D36723
Summary: Now trivial move is only triggered when moving from level n to n+1. With dynamic level base, it is possible that file is moved from level 0 to level n, while levels from 1 to n-1 are empty. Extend trivial move to this case.
Test Plan: Add a more unit test of sequential loading. Non-trivial compaction happened without the patch and now doesn't happen.
Reviewers: rven, yhchiang, MarkCallaghan, igor
Reviewed By: igor
Subscribers: leveldb, dhruba, IslamAbdelRahman
Differential Revision: https://reviews.facebook.net/D36669
Summary:
There are some cases when flachcache file descriptor was
already allocated (i.e. fb-MySQL). Then NewFlashcacheAwareEnv returns an
error at open() because fd was already assigned. This diff adds another
function to instantiate FlashcacheAwareEnv, with pre-allocated fd cachedev_fd.
Test Plan: Tested with MyRocks using this function, then worked
Reviewers: sdong, igor
Reviewed By: igor
Subscribers: dhruba, MarkCallaghan, rven
Differential Revision: https://reviews.facebook.net/D36447
Summary: Now we add warnings when user configures compression and the compression is not supported.
Test Plan:
Configured compression to non-supported values. Observed messages in my log:
2015/03/26-12:17:57.586341 7ffb8a496840 [WARN] Compression type chosen for level 2 is not supported: LZ4. RocksDB will not compress data on level 2.
2015/03/26-12:19:10.768045 7f36f15c5840 [WARN] Compression type chosen is not supported: LZ4. RocksDB will not compress data.
Reviewers: rven, sdong, yhchiang
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D35979
