Summary:
In MacOS, I got issue with `Footer`'s default constructor, which initialized the magic number with some random number instead of 0.
With investigation, I found we forgot to make the kInvalidTableMagicNumber to be static. As a result, kInvalidTableMagicNumber was assgined to `table_magic_number_` before it is initialized (which will be populated with random number).
Test Plan: passed current unit tests; also passed the unit tests for the incoming diff which used the default footer.
Reviewers: yhchiang
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16077
Summary:
This patch optimized Get() code paths by avoiding malloc of iterators. Iterator creation is moved to mem table rep implementations, where a callback is called when any key is found. This is the same practice as what we do in (SST) table readers.
db_bench result for readrandom following a writeseq, with no compression, single thread and tmpfs, we see throughput improved to 144958 from 139027, about 3%.
Test Plan: make all check
Reviewers: dhruba, haobo, igor
Reviewed By: haobo
CC: leveldb, yhchiang
Differential Revision: https://reviews.facebook.net/D14685
Summary:
* Fixed the compression state array size bug.
* Temporarily disable running `DoCompressionTest()` against bzip, which will fail the test.
Test Plan: make && ./table_test
Reviewers: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16065
Summary:
We are going to expose properties of all tables to end users through "some" db interface.
However, current design doesn't naturally fit for this need, which is because:
1. If a table presents in table cache, we cannot simply return the reference to its table properties, because the table may be destroy after compaction (and we don't want to hold the ref of the version).
2. Copy table properties is OK, but it's slow.
Thus in this diff, I change the table reader's interface to return a shared pointer (for const table properties), instead a const refernce.
Test Plan: `make check` passed
Reviewers: haobo, sdong, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15999
Summary:
This diff enables the command line tool `sst_dump` to work for sst files
under plain table format. Changes include:
* In tools/sst_dump.cc:
- add support for plain table format
- display prefix_extractor information when --show_properties is on
* In table/format.cc
- Now the table magic number of a Footer can be later initialized
via ReadFooterFromFile().
* In table/meta_bocks:
- add function ReadTableMagicNumber() that reads the magic number of
the specified file.
Minor fixes:
- remove a duplicate #include in table/table_test.cc
- fix a commentary typo in include/rocksdb/memtablerep.h
- fix lint errors.
Test Plan:
Runs sst_dump with both block-based and plain-table format files with
different arguments, specifically those with --show-properties and --from.
* sample output:
https://reviews.facebook.net/P261
Reviewers: kailiu, sdong, xjin
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15903
Summary:
Added an option for readrandom benchmark to run with tailing iterator instead of Get. Benefit of tailing iterator is that it doesn't require locking DB mutex on access.
I also have some results when running on my machine. The results highly depend on number of cache shards. With our current benchmark setting of 4 table cache shards and 6 block cache shards, I don't see much improvements of using tailing iterator. In that case, we're probably seeing cache mutex contention.
Here are the results for different number of shards
cache shards tailing iterator get
6 1.38M 1.16M
10 1.58M 1.15M
As soon as we get rid of cache mutex contention, we're seeing big improvements in using tailing iterator vs. ordinary get.
Test Plan: ran regression test
Reviewers: dhruba, haobo, ljin, kailiu, sding
Reviewed By: haobo
CC: tnovak
Differential Revision: https://reviews.facebook.net/D15867
Summary: Nothing major, just an extra return line and posibility of leaking fb in NewRandomRWFile
Test Plan: make check
Reviewers: kailiu, dhruba
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15993
Summary: To speed up the compilation while allowing us to compile in debug mode.
Test Plan:
make: see -O2 enabled
make dbg: didn't see -O2
Reviewers: igor
Reviewed By: igor
CC: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D15969
Summary:
Previous I am too ambitious to hide every detail about table factory
to internal api. However, we cannot pass the compilatoin for external
users since we use table factory as the shared_ptr, which requires
the definition of table factory's destructor.
Test Plan: make check;
Reviewers: sdong, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15861
Summary: RocksDB doesn't compile on 32-bit architecture apparently. This is attempt to fix some of 32-bit errors. They are reported here: https://gist.github.com/paxos/8789697
Test Plan: RocksDB still compiles on 64-bit :)
Reviewers: kailiu
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15825
Summary:
Use super_version insider NewIterator to avoid Ref() each component
separately under mutex
The new added bench shows NewIterator QPS increases from 515K to 719K
No meaningful improvement for multiget I guess due to its relatively small
cost comparing to 90 keys fetch in the test.
Test Plan: unit test and db_bench
Reviewers: igor, sdong
Reviewed By: igor
CC: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D15609
Summary: In PlainTable, use one single byte to represent 8 bytes of internal bytes, if seqID = 0 and it is value type (which should be common for bottom most files). It is to save 7 bytes for uncompressed cases.
Test Plan: make all check
Reviewers: haobo, dhruba, kailiu
Reviewed By: haobo
CC: igor, leveldb
Differential Revision: https://reviews.facebook.net/D15489
Summary:
VersionSet::next_file_number_ is always assumed to be strictly greater than VersionSet::log_number_. In our new recovery code, we artificially set log_number_ to be (log_number + 1), so that once we flush, we don't recover from the same log file again (this is important because of merge operator non-idempotence)
When we set VersionSet::log_number_ to (log_number + 1), we also have to mark that file number used, such that next_file_number_ is increased to a legal level. Otherwise, VersionSet might assert.
This has not be a problem so far because here's what happens:
1. assume next_file_number is 5, we're recovering log_number 10
2. in DBImpl::Recover() we call MarkFileNumberUsed with 10. This will set VersionSet::next_file_number_ to 11.
3. If there are some updates, we will call WriteTable0ForRecovery(), which will use file number 11 as a new table file and advance VersionSet::next_file_number_ to 12.
4. When we LogAndApply() with log_number 11, assertion is true: assert(11 <= 12);
However, this was a lucky occurrence. Even though this diff doesn't cause a bug, I think the issue is important to fix.
Test Plan: In column families I have different recovery logic and this code path asserted. When adding MarkFileNumberUsed(log_number + 1) assert is gone.
Reviewers: dhruba, kailiu
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15783
Summary: I didn't figure out the reason why the feature of zeroing out earlier sequence ID is disabled in universal compaction. I do see bottommost_level is set correctly. It should simply work if we remove the constraint of universal compaction.
Test Plan: make all check
Reviewers: haobo, dhruba, kailiu, igor
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15423
Summary:
Easy thing goes first. This patch moves arena to internal dir; based
on which, the coming patch will deal with memtable_rep.
Test Plan: make check
Reviewers: haobo, sdong, dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15615
Summary: The default settings enable checksum verification on every read.
Test Plan: make check
Reviewers: haobo
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15591
Summary:
Add option '--show_properties' to sst_dump tool to allow displaying
property block of the specified files.
Test Plan:
Run sst_dump with the following arguments, which covers cases affected by
this diff:
1. with only --file
2. with both --file and --show_properties
3. with --file, --show_properties, and --from
Reviewers: kailiu, xjin
Differential Revision: https://reviews.facebook.net/D15453
Summary:
In DBImpl we keep track of some statistics internally and expose them via GetProperty(). This diff encapsulates all the internal statistics into a class InternalStatisics. Most of it is copy/paste.
Apart from cleaning up db_impl.cc, this diff is also necessary for Column families, since every column family should have its own CompactionStats, MakeRoomForWrite-stall stats, etc. It's much easier to keep track of it in every column family if it's nicely encapsulated in its own class.
Test Plan: make check
Reviewers: dhruba, kailiu, haobo, sdong, emayanke
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15273
Summary: as title
Test Plan: unit test
Reviewers: haobo, igor, sdong, kailiu, dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15435
Summary:
In new third-party release tool, `LIBNAME=<customized_library> make`
will not really change the LIBNAME.
However it's very odd that the same approach works with old third-party
release tools. I checked previous rocksdb version and both librocksdb.a
and librocksdb_debug.a were correctly generated and copied to the
right place.
Test Plan:
`LIBNAME=hello make -j32` generates hello.a
`make -j32` generates librocksdb.a
Reviewers: igor, sdong, haobo, dhruba
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15555
Summary: Change all occurrences of "rocksdb" to its canonical form "RocksDB".
Test Plan: N/A
Reviewers: igor
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15549
Summary:
* Add a change log for rocksdb releases.
* Remove the hacky parts of make_new_version.sh, which are either
no longer useful or will be done in our dedicated 3rd-party release
tool.
Test Plan: N/A
Reviewers: igor, haobo, sdong, dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15543
