Summary:
For performance purposes, the lower level routines were changed to use a SystemClock* instead of a std::shared_ptr<SystemClock>. The shared ptr has some performance degradation on certain hardware classes.
For most of the system, there is no risk of the pointer being deleted/invalid because the shared_ptr will be stored elsewhere. For example, the ImmutableDBOptions stores the Env which has a std::shared_ptr<SystemClock> in it. The SystemClock* within the ImmutableDBOptions is essentially a "short cut" to gain access to this constant resource.
There were a few classes (PeriodicWorkScheduler?) where the "short cut" property did not hold. In those cases, the shared pointer was preserved.
Using db_bench readrandom perf_level=3 on my EC2 box, this change performed as well or better than 6.17:
6.17: readrandom : 28.046 micros/op 854902 ops/sec; 61.3 MB/s (355999 of 355999 found)
6.18: readrandom : 32.615 micros/op 735306 ops/sec; 52.7 MB/s (290999 of 290999 found)
PR: readrandom : 27.500 micros/op 871909 ops/sec; 62.5 MB/s (367999 of 367999 found)
(Note that the times for 6.18 are prior to revert of the SystemClock).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8033
Reviewed By: pdillinger
Differential Revision: D27014563
Pulled By: mrambacher
fbshipit-source-id: ad0459eba03182e454391b5926bf5cdd45657b67
Summary:
On x86_64, this makes the struct 8 bytes smaller, so creating a PerfStepTimer on the stack will use slightly less stack space.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7931
Reviewed By: jay-zhuang
Differential Revision: D26529470
Pulled By: ajkr
fbshipit-source-id: bbe2e843167152ffa05a5946f1add6621c9849f7
Summary:
This is likely a temp fix before we figure out a better way.
PerfStepTimer is used intensively in certain benchmarking/testings. https://github.com/facebook/rocksdb/issues/7858 stores a `shared_ptr` to system clock in PerfStepTimer which gets created each time a `PerfStepTimer` object is created. The atomic operations in `shared_ptr` may add overhead in CPU cycles. Therefore, we change it back to a raw `SystemClock*` for now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8006
Test Plan: make check
Reviewed By: pdillinger
Differential Revision: D26703560
Pulled By: riversand963
fbshipit-source-id: 519d0769b28da2334bea7d86c848fcc26ee8a17f
Summary:
Fixed 5 test case failures found on Windows 10/Windows Server 2016
1. In `flush_job_test`, the DestroyDir function fails in deconstructor because some file handles are still being held by VersionSet. This happens on Windows Server 2016, so need to manually reset versions_ pointer to release all file handles.
2. In `StatsHistoryTest.InMemoryStatsHistoryPurging` test, the capping memory cost of stats_history_size on Windows becomes 14000 bytes with latest changes, not just 13000 bytes.
3. In `SSTDumpToolTest.RawOutput` test, the output file handle is not closed at the end.
4. In `FullBloomTest.OptimizeForMemory` test, ROCKSDB_MALLOC_USABLE_SIZE is undefined on windows so `total_mem` is always equal to `total_size`. The internal memory fragmentation assertion does not apply in this case.
5. In `BlockFetcherTest.FetchAndUncompressCompressedDataBlock` test, XPRESS cannot reach 87.5% compression ratio with original CreateTable method, so I append extra zeros to the string value to enhance compression ratio. Beside, since XPRESS allocates memory internally, thus does not support for custom allocator verification, we will skip the allocator verification for XPRESS
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7992
Reviewed By: jay-zhuang
Differential Revision: D26615283
Pulled By: ajkr
fbshipit-source-id: 3632612f84b99e2b9c77c403b112b6bedf3b125d
Summary:
Introduces and uses a SystemClock class to RocksDB. This class contains the time-related functions of an Env and these functions can be redirected from the Env to the SystemClock.
Many of the places that used an Env (Timer, PerfStepTimer, RepeatableThread, RateLimiter, WriteController) for time-related functions have been changed to use SystemClock instead. There are likely more places that can be changed, but this is a start to show what can/should be done. Over time it would be nice to migrate most (if not all) of the uses of the time functions from the Env to the SystemClock.
There are several Env classes that implement these functions. Most of these have not been converted yet to SystemClock implementations; that will come in a subsequent PR. It would be good to unify many of the Mock Timer implementations, so that they behave similarly and be tested similarly (some override Sleep, some use a MockSleep, etc).
Additionally, this change will allow new methods to be introduced to the SystemClock (like https://github.com/facebook/rocksdb/issues/7101 WaitFor) in a consistent manner across a smaller number of classes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7858
Reviewed By: pdillinger
Differential Revision: D26006406
Pulled By: mrambacher
fbshipit-source-id: ed10a8abbdab7ff2e23d69d85bd25b3e7e899e90
Summary:
Added "no-elide-constructors to the ASSERT_STATUS_CHECK builds. This flag gives more errors/warnings for some of the Status checks where an inner class checks a Status and later returns it. In this case, without the elide check on, the returned status may not have been checked in the caller, thereby bypassing the checked code.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7798
Reviewed By: jay-zhuang
Differential Revision: D25680451
Pulled By: pdillinger
fbshipit-source-id: c3f14ed9e2a13f0a8c54d839d5fb4d1fc1e93917
Summary:
This is a PR generated **semi-automatically** by an internal tool to remove unused includes and `using` statements.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7604
Test Plan: make check
Reviewed By: ajkr
Differential Revision: D24579392
Pulled By: riversand963
fbshipit-source-id: c4bfa6c6b08da1de186690d37eb73d8fff45aecd
Summary:
This PR does a few things:
1. The MockFileSystem class was split out from the MockEnv. This change would theoretically allow a MockFileSystem to be used by other Environments as well (if we created a means of constructing one). The MockFileSystem implements a FileSystem in its entirety and does not rely on any Wrapper implementation.
2. Make the RocksDB test suite work when MOCK_ENV=1 and ENCRYPTED_ENV=1 are set. To accomplish this, a few things were needed:
- The tests that tried to use the "wrong" environment (Env::Default() instead of env_) were updated
- The MockFileSystem was changed to support the features it was missing or mishandled (such as recursively deleting files in a directory or supporting renaming of a directory).
3. Updated the test framework to have a ROCKSDB_GTEST_SKIP macro. This can be used to flag tests that are skipped. Currently, this defaults to doing nothing (marks the test as SUCCESS) but will mark the tests as SKIPPED when RocksDB is upgraded to a version of gtest that supports this (gtest-1.10).
I have run a full "make check" with MEM_ENV, ENCRYPTED_ENV, both, and neither under both MacOS and RedHat. A few tests were disabled/skipped for the MEM/ENCRYPTED cases. The error_handler_fs_test fails/hangs for MEM_ENV (presumably a timing problem) and I will introduce another PR/issue to track that problem. (I will also push a change to disable those tests soon). There is one more test in DBTest2 that also fails which I need to investigate or skip before this PR is merged.
Theoretically, this PR should also allow the test suite to run against an Env loaded from the registry, though I do not have one to try it with currently.
Finally, once this is accepted, it would be nice if there was a CircleCI job to run these tests on a checkin so this effort does not become stale. I do not know how to do that, so if someone could write that job, it would be appreciated :)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7566
Reviewed By: zhichao-cao
Differential Revision: D24408980
Pulled By: jay-zhuang
fbshipit-source-id: 911b1554a4d0da06fd51feca0c090a4abdcb4a5f
Summary:
Add following stats for MultiGet in Histogram to get more insight on MultiGet.
1. Number of index and filter blocks read from file as part of MultiGet
request per level.
2. Number of data blocks read from file per level.
3. Number of SST files loaded from file system per level.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7366
Reviewed By: anand1976
Differential Revision: D24127040
Pulled By: akankshamahajan15
fbshipit-source-id: e63a003056b833729b277edc0639c08fb432756b
Summary:
This PR schedules a background thread (shared across all DB instances)
to flush info log every ten seconds. This improves debuggability in case
of RocksDB hanging since it ensures the log messages leading up to the hang
will eventually become visible in the log.
The bulk of this PR is moving monitoring/stats_dump_scheduler* to db/periodic_work_scheduler*
and making the corresponding name changes since now the scheduler handles info
log flushing, not just stats dumping.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7488
Reviewed By: riversand963
Differential Revision: D24065165
Pulled By: ajkr
fbshipit-source-id: 339c47a0ff43b79fdbd055fbd9fefbb6f9d8d3b5
Summary:
Currently, application may pass a statistics object to db but later
wants to reduce stats tracking overhead by setting stats level to
kExceptHistogramOrTimers (the current lowest level). Tickers will still
be incremented, causing up to 1% CPU. We can add a new lowest stats
level `kExceptTickers` to disable ticker incrementing as well, thus
reducing CPU cycles spent on tickers.
Test Plan (devserver):
```
make check
make clean
DEBUG_LEVEL=0 make db_bench
./db_bench -perf_level=1 -stats_level=0 -statistics -benchmarks=fillseq,readrandom -duration=120
```
Measure CPU util (%) before and after change:
CPU util by rocksdb::RecordTick: 1.1 vs (<0.1)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7329
Reviewed By: pdillinger
Differential Revision: D23434014
Pulled By: riversand963
fbshipit-source-id: 72ff0f02a192ac476d4b0044b9f37fd4a22ff0d4
Summary:
And change the internal time value from seconds to microseconds.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7293
Reviewed By: pdillinger
Differential Revision: D23253751
Pulled By: jay-zhuang
fbshipit-source-id: 36aa9376b8801b85bd10163173590a17cf4f3a3a
Summary:
This test uses database functionality and required more extensive work to get it to pass than the other tests. The DB functionality required for this test now passes the check.
When it was unclear what the proper behavior was for unchecked status codes, a TODO was added.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7283
Reviewed By: akankshamahajan15
Differential Revision: D23251497
Pulled By: ajkr
fbshipit-source-id: 52b79629bdafa0a58de8ead1d1d66f141b331523
Summary:
There's a potential deadlock caused by MockTimeEnv time value get to a large number, which causes TimedWait() wait forever. The test misuses the microseconds as seconds, making it more likely to happen.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7277
Reviewed By: pdillinger
Differential Revision: D23183873
Pulled By: jay-zhuang
fbshipit-source-id: 6fc38ebd40b4125a99551204b271f91a27e70086
Summary:
After https://github.com/facebook/rocksdb/pull/7036, we still see extra DBTest that can timeout when running 10 or 20 in parallel. Expand skip-fsync mode in whole DBTest. Still preserve other tests from doing this mode to be conservative.
This commit reinstates https://github.com/facebook/rocksdb/issues/7049, whose un-revert was lost in an automatic
infrastructure mis-merge.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7274
Test Plan: Run all existing files.
Reviewed By: pdillinger
Differential Revision: D23177444
fbshipit-source-id: 1f61690b2ac6333c3b2c87176fef6b2cba086b33
Summary:
Have a global StatsDumpScheduler for all DB instance stats dumping, including `DumpStats()` and `PersistStats()`. Before this, there're 2 dedicate threads for every DB instance, one for DumpStats() one for PersistStats(), which could create lots of threads if there're hundreds DB instances.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7223
Reviewed By: riversand963
Differential Revision: D23056737
Pulled By: jay-zhuang
fbshipit-source-id: 0faa2311142a73433ebb3317361db7cbf43faeba
Summary:
We have a number of tests hanging on MacOS and windows due to
mishandling of code for mock sleeps. In addition, the code was in
terrible shape because the same variable (addon_time_) would sometimes
refer to microseconds and sometimes to seconds. One test even assumed it
was nanoseconds but was written to pass anyway.
This has been cleaned up so that DB tests generally use a SpecialEnv
function to mock sleep, for either some number of microseconds or seconds
depending on the function called. But to call one of these, the test must first
call SetMockSleep (precondition enforced with assertion), which also turns
sleeps in RocksDB into mock sleeps. To also removes accounting for actual
clock time, call SetTimeElapseOnlySleepOnReopen, which implies
SetMockSleep (on DB re-open). This latter setting only works by applying
on DB re-open, otherwise havoc can ensue if Env goes back in time with
DB open.
More specifics:
Removed some unused test classes, and updated comments on the general
problem.
Fixed DBSSTTest.GetTotalSstFilesSize using a sync point callback instead
of mock time. For this we have the only modification to production code,
inserting a sync point callback in flush_job.cc, which is not a change to
production behavior.
Removed unnecessary resetting of mock times to 0 in many tests. RocksDB
deals in relative time. Any behaviors relying on absolute date/time are likely
a bug. (The above test DBSSTTest.GetTotalSstFilesSize was the only one
clearly injecting a specific absolute time for actual testing convenience.) Just
in case I misunderstood some test, I put this note in each replacement:
// NOTE: Presumed unnecessary and removed: resetting mock time in env
Strengthened some tests like MergeTestTime, MergeCompactionTimeTest, and
FilterCompactionTimeTest in db_test.cc
stats_history_test and blob_db_test are each their own beast, rather deeply
dependent on MockTimeEnv. Each gets its own variant of a work-around for
TimedWait in a mock time environment. (Reduces redundancy and
inconsistency in stats_history_test.)
Intended follow-up:
Remove TimedWait from the public API of InstrumentedCondVar, and only
make that accessible through Env by passing in an InstrumentedCondVar and
a deadline. Then the Env implementations mocking time can fix this problem
without using sync points. (Test infrastructure using sync points interferes
with individual tests' control over sync points.)
With that change, we can simplify/consolidate the scattered work-arounds.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7101
Test Plan: make check on Linux and MacOS
Reviewed By: zhichao-cao
Differential Revision: D23032815
Pulled By: pdillinger
fbshipit-source-id: 7f33967ada8b83011fb54e8279365c008bd6610b
Summary:
Adds compaction statistics (total bytes read and written) for compactions that occur for delete-triggered, periodic, and TTL compaction reasons.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7165
Test Plan:
TTL and periodic can be checked by runnning db_bench with the options activated:
/db_bench --benchmarks="fillrandom,stats" --statistics --num=10000000 -base_background_compactions=16 -periodic_compaction_seconds=1
./db_bench --benchmarks="fillrandom,stats" --statistics --num=10000000 -base_background_compactions=16 -fifo_compaction_ttl=1
Setting the time to one second causes non-zero bytes read/written for those compaction reasons. Disabling them or setting them to times longer than the test run length causes the stats to return to zero as expected.
Delete-triggered compaction counting is tested in DBTablePropertiesTest.DeletionTriggeredCompactionMarking
Reviewed By: ajkr
Differential Revision: D22693050
Pulled By: akabcenell
fbshipit-source-id: d15cef4d94576f703015c8942d5f0d492f69401d
Summary:
After https://github.com/facebook/rocksdb/pull/7036, we still see extra DBTest that can timeout when running 10 or 20 in parallel. Expand skip-fsync mode in whole DBTest. Still preserve other tests from doing this mode to be conservative.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7049
Test Plan: Run all existing files.
Reviewed By: pdillinger
Differential Revision: D22301700
fbshipit-source-id: f9a9e3b3b26ce640665a47cb8bff33ba0c89b565
Summary:
The dynamic_cast in the filter benchmark causes release mode to fail due to
no-rtti. Replace with static_cast_with_check.
Signed-off-by: Derrick Pallas <derrick@pallas.us>
Addition by peterd: Remove unnecessary 2nd template arg on all static_cast_with_check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6732
Reviewed By: ltamasi
Differential Revision: D21304260
Pulled By: pdillinger
fbshipit-source-id: 6e8eb437c4ca5a16dbbfa4053d67c4ad55f1608c
Summary:
Since read threads do not coordinate on loading data into block
cache, two threads between Lookup and Insert can end up loading and
inserting the same data. This is particularly concerning with
cache_index_and_filter_blocks since those are hot and more likely to
be race targets if ejected from (or not pre-populated in) the cache.
Particularly with moves toward disaggregated / network storage, the cost
of redundant retrieval might be high, and we should at least have some
hard statistics from which we can estimate impact.
Example with full filter thrashing "cliff":
$ ./db_bench --benchmarks=fillrandom --num=15000000 --cache_index_and_filter_blocks -bloom_bits=10
...
$ ./db_bench --db=/tmp/rocksdbtest-172704/dbbench --use_existing_db --benchmarks=readrandom,stats --num=200000 --cache_index_and_filter_blocks --cache_size=$((130 * 1024 * 1024)) --bloom_bits=10 --threads=16 -statistics 2>&1 | egrep '^rocksdb.block.cache.(.*add|.*redundant)' | grep -v compress | sort
rocksdb.block.cache.add COUNT : 14181
rocksdb.block.cache.add.failures COUNT : 0
rocksdb.block.cache.add.redundant COUNT : 476
rocksdb.block.cache.data.add COUNT : 12749
rocksdb.block.cache.data.add.redundant COUNT : 18
rocksdb.block.cache.filter.add COUNT : 1003
rocksdb.block.cache.filter.add.redundant COUNT : 217
rocksdb.block.cache.index.add COUNT : 429
rocksdb.block.cache.index.add.redundant COUNT : 241
$ ./db_bench --db=/tmp/rocksdbtest-172704/dbbench --use_existing_db --benchmarks=readrandom,stats --num=200000 --cache_index_and_filter_blocks --cache_size=$((120 * 1024 * 1024)) --bloom_bits=10 --threads=16 -statistics 2>&1 | egrep '^rocksdb.block.cache.(.*add|.*redundant)' | grep -v compress | sort
rocksdb.block.cache.add COUNT : 1182223
rocksdb.block.cache.add.failures COUNT : 0
rocksdb.block.cache.add.redundant COUNT : 302728
rocksdb.block.cache.data.add COUNT : 31425
rocksdb.block.cache.data.add.redundant COUNT : 12
rocksdb.block.cache.filter.add COUNT : 795455
rocksdb.block.cache.filter.add.redundant COUNT : 130238
rocksdb.block.cache.index.add COUNT : 355343
rocksdb.block.cache.index.add.redundant COUNT : 172478
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6681
Test Plan: Some manual testing (above) and unit test covering key metrics is included
Reviewed By: ltamasi
Differential Revision: D21134113
Pulled By: pdillinger
fbshipit-source-id: c11497b5f00f4ffdfe919823904e52d0a1a91d87
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433
Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.
Differential Revision: D19977691
fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
Summary:
We see some odd errors complaining math. However, it doesn't seem that it is needed to be included. Remove the include of math.h. Just removing it from db_bench doesn't seem to break anything. Replacing sqrt from std::sqrt seems to work for histogram.cc
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6373
Test Plan: Watch Travis and appveyor to run.
Differential Revision: D19730068
fbshipit-source-id: d3ad41defcdd9f51c2da1a3673fb258f5dfacf47
Summary:
Further apply formatter to more recent commits.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5830
Test Plan: Run all existing tests.
Differential Revision: D17488031
fbshipit-source-id: 137458fd94d56dd271b8b40c522b03036943a2ab
Summary:
Use delete to disable automatic generated methods instead of private, and put the constructor together for more clear.This modification cause the unused field warning, so add unused attribute to disable this warning.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5009
Differential Revision: D17288733
fbshipit-source-id: 8a767ce096f185f1db01bd28fc88fef1cdd921f3
Summary:
This was previously broken, as the performance context-related
macro signatures in file monitoring/perf_context_imp.h
deviated for the case when NPERF_CONTEXT was defined and when it
was not.
Update the macros for the `-DNPERF_CONTEXT` case, so it compiles.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5704
Differential Revision: D16867746
fbshipit-source-id: 05539724cb1f7955ecc42828365836a677759ad9
Summary:
if read_options.snapshot is not set, ::Get will take the last sequence number after taking a super-version and uses that as the sequence number. Theoretically max_eviceted_seq_ could advance this sequence number. This could lead ::IsInSnapshot that will be invoked by the ReadCallback to notice the absence of the snapshot. In this case, the ReadCallback should have passed a non-value to snap_released so that it could be set by the ::IsInSnapshot. The patch does that, and adds a unit test to verify it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5664
Differential Revision: D16614033
Pulled By: maysamyabandeh
fbshipit-source-id: 06fb3fd4aacd75806ed1a1acec7961f5d02486f2
Summary:
Recent commit 3886dddc3b introduced a new test which is not compatible with lite mode and breaks contrun test:
```
[ RUN ] StatsHistoryTest.ForceManualFlushStatsCF
monitoring/stats_history_test.cc:642: Failure
Expected: (cfd_stats->GetLogNumber()) < (cfd_test->GetLogNumber()), actual: 15 vs 15
```
This PR excludes the test from lite mode to appease the failing test
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5529
Differential Revision: D16080892
Pulled By: miasantreble
fbshipit-source-id: 2f8a22758f71250cd9f204046404226ddc13b028
Summary:
WAL records RocksDB writes to all column families. When user flushes a a column family, the old WAL will not accept new writes but cannot be deleted yet because it may still contain live data for other column families. (See https://github.com/facebook/rocksdb/wiki/Write-Ahead-Log#life-cycle-of-a-wal for detailed explanation)
Because of this, if there is a column family that receive very infrequent writes and no manual flush is called for it, it could prevent a lot of WALs from being deleted. PR https://github.com/facebook/rocksdb/pull/5046 introduced persistent stats column family which is a good example of such column families. Depending on the config, it may have long intervals between writes, and user is unaware of it which makes it difficult to call manual flush for it.
This PR addresses the problem for persistent stats column family by forcing a flush for persistent stats column family when 1) another column family is flushed 2) persistent stats column family's log number is the smallest among all column families, this way persistent stats column family will keep advancing its log number when necessary, allowing RocksDB to delete old WAL files.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5509
Differential Revision: D16045896
Pulled By: miasantreble
fbshipit-source-id: 286837b633e988417f0096ff38384742d3b40ef4
Summary:
recent commit 671d15cbdd introduced some test failures:
```
===== Running stats_history_test
[==========] Running 9 tests from 1 test case.
[----------] Global test environment set-up.
[----------] 9 tests from StatsHistoryTest
[ RUN ] StatsHistoryTest.RunStatsDumpPeriodSec
monitoring/stats_history_test.cc:63: Failure
dbfull()->SetDBOptions({{"stats_dump_period_sec", "0"}})
Not implemented: Not supported in ROCKSDB LITE
db/db_options_test.cc:28:11: error: unused variable 'kMicrosInSec' [-Werror,-Wunused-const-variable]
const int kMicrosInSec = 1000000;
```
This PR fixes these failures
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5477
Differential Revision: D15871814
Pulled By: miasantreble
fbshipit-source-id: 0a7023914d2c1784d9d2d3f5bfb47310d4855394
Summary:
This PR continues the work in https://github.com/facebook/rocksdb/pull/4748 and https://github.com/facebook/rocksdb/pull/4535 by adding a new DBOption `persist_stats_to_disk` which instructs RocksDB to persist stats history to RocksDB itself. When statistics is enabled, and both options `stats_persist_period_sec` and `persist_stats_to_disk` are set, RocksDB will periodically write stats to a built-in column family in the following form: key -> (timestamp in microseconds)#(stats name), value -> stats value. The existing API `GetStatsHistory` will detect the current value of `persist_stats_to_disk` and either read from in-memory data structure or from the hidden column family on disk.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5046
Differential Revision: D15863138
Pulled By: miasantreble
fbshipit-source-id: bb82abdb3f2ca581aa42531734ac799f113e931b
Summary:
When using `PRIu64` type of printf specifier, current code base does the following:
```
#ifndef __STDC_FORMAT_MACROS
#define __STDC_FORMAT_MACROS
#endif
#include <inttypes.h>
```
However, this can be simplified to
```
#include <cinttypes>
```
as long as flag `-std=c++11` is used.
This should solve issues like https://github.com/facebook/rocksdb/issues/5159
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5402
Differential Revision: D15701195
Pulled By: miasantreble
fbshipit-source-id: 6dac0a05f52aadb55e9728038599d3d2e4b59d03
Summary:
There are too many types of files under util/. Some test related files don't belong to there or just are just loosely related. Mo
ve them to a new directory test_util/, so that util/ is cleaner.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5377
Differential Revision: D15551366
Pulled By: siying
fbshipit-source-id: 0f5c8653832354ef8caa31749c0143815d719e2c
Summary:
Since Statistics::measureTime() is deprecated, StatisticsImpl::measureTime() is not implemented. We realized that users might have a wrapped Statistics implementation in which measureTime() is implemented as forwarded to StatisticsImpl, and causes assert failure. In order to make the change less intrusive, we implement StatisticsImpl::measureTime(). We will revisit whether we need to remove it after several releases.
Also, add a test to make sure that a Statistics implementation using the old interface still works.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5181
Differential Revision: D14907089
Pulled By: siying
fbshipit-source-id: 29b6202fd04e30ed6f6adcaeb1000e87f10d1e1a
Summary:
This PR introduces a new MultiGet() API, with the underlying implementation grouping keys based on SST file and batching lookups in a file. The reason for the new API is twofold - the definition allows callers to allocate storage for status and values on stack instead of std::vector, as well as return values as PinnableSlices in order to avoid copying, and it keeps the original MultiGet() implementation intact while we experiment with batching.
Batching is useful when there is some spatial locality to the keys being queries, as well as larger batch sizes. The main benefits are due to -
1. Fewer function calls, especially to BlockBasedTableReader::MultiGet() and FullFilterBlockReader::KeysMayMatch()
2. Bloom filter cachelines can be prefetched, hiding the cache miss latency
The next step is to optimize the binary searches in the level_storage_info, index blocks and data blocks, since we could reduce the number of key comparisons if the keys are relatively close to each other. The batching optimizations also need to be extended to other formats, such as PlainTable and filter formats. This also needs to be added to db_stress.
Benchmark results from db_bench for various batch size/locality of reference combinations are given below. Locality was simulated by offsetting the keys in a batch by a stride length. Each SST file is about 8.6MB uncompressed and key/value size is 16/100 uncompressed. To focus on the cpu benefit of batching, the runs were single threaded and bound to the same cpu to eliminate interference from other system events. The results show a 10-25% improvement in micros/op from smaller to larger batch sizes (4 - 32).
Batch Sizes
1 | 2 | 4 | 8 | 16 | 32
Random pattern (Stride length 0)
4.158 | 4.109 | 4.026 | 4.05 | 4.1 | 4.074 - Get
4.438 | 4.302 | 4.165 | 4.122 | 4.096 | 4.075 - MultiGet (no batching)
4.461 | 4.256 | 4.277 | 4.11 | 4.182 | 4.14 - MultiGet (w/ batching)
Good locality (Stride length 16)
4.048 | 3.659 | 3.248 | 2.99 | 2.84 | 2.753
4.429 | 3.728 | 3.406 | 3.053 | 2.911 | 2.781
4.452 | 3.45 | 2.833 | 2.451 | 2.233 | 2.135
Good locality (Stride length 256)
4.066 | 3.786 | 3.581 | 3.447 | 3.415 | 3.232
4.406 | 4.005 | 3.644 | 3.49 | 3.381 | 3.268
4.393 | 3.649 | 3.186 | 2.882 | 2.676 | 2.62
Medium locality (Stride length 4096)
4.012 | 3.922 | 3.768 | 3.61 | 3.582 | 3.555
4.364 | 4.057 | 3.791 | 3.65 | 3.57 | 3.465
4.479 | 3.758 | 3.316 | 3.077 | 2.959 | 2.891
dbbench command used (on a DB with 4 levels, 12 million keys)-
TEST_TMPDIR=/dev/shm numactl -C 10 ./db_bench.tmp -use_existing_db=true -benchmarks="readseq,multireadrandom" -write_buffer_size=4194304 -target_file_size_base=4194304 -max_bytes_for_level_base=16777216 -num=12000000 -reads=12000000 -duration=90 -threads=1 -compression_type=none -cache_size=4194304000 -batch_size=32 -disable_auto_compactions=true -bloom_bits=10 -cache_index_and_filter_blocks=true -pin_l0_filter_and_index_blocks_in_cache=true -multiread_batched=true -multiread_stride=4
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5011
Differential Revision: D14348703
Pulled By: anand1976
fbshipit-source-id: 774406dab3776d979c809522a67bedac6c17f84b
Summary:
I think when PR https://github.com/facebook/rocksdb/pull/4889 added the `IOSTATS_CPU_TIMER_GUARD` define to this header file, the noop version in the `#else` branch was forgotten.
Not sure if this is common, but on my MacOS machine it breaks my build
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5136
Differential Revision: D14727727
Pulled By: siying
fbshipit-source-id: 1076e56bdbe6ecda01d461b371dabf7f1593a149
Summary:
Introduce CPU timers for iterator seek and next operations. Seek
counter includes SeekToFirst, SeekToLast and SeekForPrev, w/ the
caveat that SeekToLast timer doesn't include some post processing
time if upper bound is defined.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5076
Differential Revision: D14525218
Pulled By: fredfsh
fbshipit-source-id: 03ba25df3b22b06c072621e4de0eacfa1445f0d9
Summary:
Right now, users can change statistics.stats_level while DB is running, but TSAN may report
data race. We make stats_level_ to be atomic, and access them using accessors.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5030
Differential Revision: D14267519
Pulled By: siying
fbshipit-source-id: 37d7ebeff7a43a406230143422a16af899163f73
Summary:
Statistics cost too much CPU for some use cases. Add two stats levels
so that people can choose to skip two types of expensive stats, timers and
histograms.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5027
Differential Revision: D14252765
Pulled By: siying
fbshipit-source-id: 75ecec9eaa44c06118229df4f80c366115346592