Summary:
In making `SstFileMetaData` inherit from `FileStorageInfo`, I
overlooked setting some `FileStorageInfo` fields when then default
`SstFileMetaData()` ctor is used. This affected `GetLiveFilesMetaData()`.
Also removed some buggy `static_cast<size_t>`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9769
Test Plan: Updated tests
Reviewed By: jay-zhuang
Differential Revision: D35220383
Pulled By: pdillinger
fbshipit-source-id: 05b4ee468258dbd3699517e1124838bf405fe7f8
Summary:
Fixes https://github.com/facebook/rocksdb/issues/9718
The verify_checksums flag of read_options should be passed to the read options used by the BlockFetcher in a couple of cases where it is not at present. It will now happen (but did not, previously) on iteration and on [multi]get, where a fetcher is created as part of the iterate/get call.
This may result in much better performance in a few workloads where the client chooses to remove verification.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9767
Reviewed By: mrambacher
Differential Revision: D35218986
Pulled By: jay-zhuang
fbshipit-source-id: 329d29764bb70fbc7f2673440bc46c107a813bc8
Summary:
In ReadOption `async_io` which prefetches the data asynchronously, db_bench and db_stress runs were failing because wrong data was prefetched which resulted in Error: Checksum mismatched. Wrong data was copied because capacity was less than actual size needed. It has been fixed in this PR.
Since there are two separate methods for async and sync prefetching, these changes are in async prefetching methods and any changes would not effect normal prefetching. I ran the regressions to make sure normal prefetching is fine.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9734
Test Plan:
1. CircleCI jobs
2. Ran db_bench
```
. /db_bench -use_existing_db=true
-db=/tmp/prefix_scan_prefetch_main -benchmarks="seekrandom" -key_size=32
-value_size=512 -num=5000000 -use_direct_reads=true -seek_nexts=327680
-duration=120 -ops_between_duration_checks=1 -async_io=1 -adaptive_readahead=1
```
3. Ran db_stress test
```
export CRASH_TEST_EXT_ARGS=" --async_io=1 --adaptive_readahead=1"
make crash_test -j
```
4. Run regressions for async_io disabled.
Old flow without any async changes:
```
./db_bench -use_existing_db=true -db=/tmp/prefix_scan_prefetch_main -benchmarks="seekrandom" -key_size=32 -value_size=512 -num=5000000 -use_direct_reads=true -seek_nexts=327680 -duration=120 -ops_between_duration_checks=1
Initializing RocksDB Options from the specified file
Initializing RocksDB Options from command-line flags
RocksDB: version 7.0
Date: Thu Mar 17 13:11:34 2022
CPU: 24 * Intel Core Processor (Broadwell)
CPUCache: 16384 KB
Keys: 32 bytes each (+ 0 bytes user-defined timestamp)
Values: 512 bytes each (256 bytes after compression)
Entries: 5000000
Prefix: 0 bytes
Keys per prefix: 0
RawSize: 2594.0 MB (estimated)
FileSize: 1373.3 MB (estimated)
Write rate: 0 bytes/second
Read rate: 0 ops/second
Compression: Snappy
Compression sampling rate: 0
Memtablerep: SkipListFactory
Perf Level: 1
------------------------------------------------
DB path: [/tmp/prefix_scan_prefetch_main]
seekrandom : 483618.390 micros/op 2 ops/sec; 338.9 MB/s (249 of 249 found)
```
With async prefetching changes and async_io disabled to make sure in normal prefetching there is no regression.
```
./db_bench -use_existing_db=true -db=/tmp/prefix_scan_prefetch_main -benchmarks="seekrandom" -key_size=32 -value_size=512 -num=5000000 -use_direct_reads=true -seek_nexts=327680 -duration=120 -ops_between_duration_checks=1 --async_io=0
Initializing RocksDB Options from the specified file
Initializing RocksDB Options from command-line flags
RocksDB: version 7.1
Date: Wed Mar 23 15:56:37 2022
CPU: 24 * Intel Core Processor (Broadwell)
CPUCache: 16384 KB
Keys: 32 bytes each (+ 0 bytes user-defined timestamp)
Values: 512 bytes each (256 bytes after compression)
Entries: 5000000
Prefix: 0 bytes
Keys per prefix: 0
RawSize: 2594.0 MB (estimated)
FileSize: 1373.3 MB (estimated)
Write rate: 0 bytes/second
Read rate: 0 ops/second
Compression: Snappy
Compression sampling rate: 0
Memtablerep: SkipListFactory
Perf Level: 1
------------------------------------------------
DB path: [/tmp/prefix_scan_prefetch_main]
seekrandom : 481819.816 micros/op 2 ops/sec; 340.2 MB/s (250 of 250 found)
```
Reviewed By: riversand963
Differential Revision: D35058471
Pulled By: akankshamahajan15
fbshipit-source-id: 9233a1e6d97cea0c7a8111bfb9e8ac3251c341ce
Summary:
Fixes a bug introduced by me in https://github.com/facebook/rocksdb/pull/9733
That PR added a counter so that the per-thread seeds in ThreadState would
be unique even when --benchmarks had more than one test. But it incorrectly
used this counter as the value for ThreadState::tid as well.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9757
Test Plan:
Confirm that unexpectedly good QPS results on the regression tests return
to normal with this fix. I have confirmed that the QPS increase starts with
the PR 9733 diff.
Reviewed By: jay-zhuang
Differential Revision: D35149303
Pulled By: mdcallag
fbshipit-source-id: dee5cc36b7faaba6c3be6d6a253d3c2eaad72864
Summary:
Uniformly use GetByteArrayRegion() instead of GetByteArrayElements()
to copy bytes.
In addition, it can avoid an inefficient ReleaseByteArrayElements()
operation.
Some benefits of GetByteArrayRegion() can be referred to:
https://stackoverflow.com/a/2480493
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9380
Reviewed By: ajkr
Differential Revision: D35135474
Pulled By: jay-zhuang
fbshipit-source-id: a32c1774d37f2d22b9bcd105d83e0bb984b71b54
Summary:
This is for https://github.com/facebook/rocksdb/issues/9737
I have wasted more than a few hours running db_bench benchmarks where --seed was not set
and getting better than expected results because cache hit rates are great because
multiple invocations of db_bench used the same value for --seed or did not set it,
and then all used 0. The result is that all see the same sequence of keys.
Others have done the same. The problem is worse in that it is easy to miss and the result is a benchmark with results that are misleading.
A good way to avoid this is to set it to the equivalent of gettimeofday() when either
--seed is not set or it is set to 0 (the default).
With this change the actual seed is printed when it was 0 at process start:
Set seed to 1647992570365606 because --seed was 0
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9740
Test Plan:
Perf results:
./db_bench --benchmarks=fillseq,readrandom --num=1000000 --reads=4000000
readrandom : 6.469 micros/op 154583 ops/sec; 17.1 MB/s (4000000 of 4000000 found)
./db_bench --benchmarks=fillseq,readrandom --num=1000000 --reads=4000000 --seed=0
readrandom : 6.565 micros/op 152321 ops/sec; 16.9 MB/s (4000000 of 4000000 found)
./db_bench --benchmarks=fillseq,readrandom --num=1000000 --reads=4000000 --seed=1
readrandom : 6.461 micros/op 154777 ops/sec; 17.1 MB/s (4000000 of 4000000 found)
./db_bench --benchmarks=fillseq,readrandom --num=1000000 --reads=4000000 --seed=2
readrandom : 6.525 micros/op 153244 ops/sec; 17.0 MB/s (4000000 of 4000000 found)
Reviewed By: jay-zhuang
Differential Revision: D35145361
Pulled By: mdcallag
fbshipit-source-id: 2b35b153ccec46b27d7c9405997523555fc51267
Summary:
After commit [d642c60](d642c60bdc), the stats `READ_BLOCK_COMPACTION_MICROS` cannot record any compaction read duration, and it always report zero.
This PR targets to distinguish `READ_BLOCK_COMPACTION_MICROS` with `READ_BLOCK_GET_MICROS` so that `READ_BLOCK_COMPACTION_MICROS` could record the correct stats.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9722
Reviewed By: ajkr
Differential Revision: D35021870
Pulled By: jay-zhuang
fbshipit-source-id: f1a804994265e51465de64c2a08f2e0eeb6fc5a3
Summary:
Seems clean-rocksjava and clean-rocks conflict.
Also remove unnecessary step in java CI build, otherwise it will rebuild
the code again as java make sample do clean up first.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9710
Test Plan: `make rocksdbjava && make clean` should return success
Reviewed By: riversand963
Differential Revision: D35122872
Pulled By: jay-zhuang
fbshipit-source-id: 2a15b83e7a763c0fc0e42e1f35aac9551f951ece
Summary:
This adds the --slow_usecs option with a default value of 1M. Operations that
take this much time have a message printed when --histogram=1, --stats_interval=0
and --stats_interval_seconds=0. The current code hardwired this to 20,000 usecs
and for some stress tests that reduced throughput by 20% or more.
This is for https://github.com/facebook/rocksdb/issues/9620
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9732
Test Plan:
./db_bench --benchmarks=fillrandom,readrandom --compression_type=lz4 --slow_usecs=100 --histogram=1
./db_bench --benchmarks=fillrandom,readrandom --compression_type=lz4 --slow_usecs=100000 --histogram=1
Reviewed By: jay-zhuang
Differential Revision: D35121522
Pulled By: mdcallag
fbshipit-source-id: daf27f937efd748980545d6395db332712fc078b
Summary:
Although ColumnFamilySet comments say that DB mutex can be
freed during iteration, as long as you hold a ref while releasing DB
mutex, this is not quite true because UnrefAndTryDelete might delete cfd
right before it is needed to get ->next_ for the next iteration of the
loop.
This change solves the problem by making a wrapper class that makes such
iteration easier while handling the tricky details of UnrefAndTryDelete
on the previous cfd only after getting next_ in operator++.
FreeDeadColumnFamilies should already have been obsolete; this removes
it for good. Similarly, ColumnFamilySet::iterator doesn't need to check
for cfd with 0 refs, because those are immediately deleted.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9730
Test Plan:
was reported with ASAN on unit tests like
DBLogicalBlockSizeCacheTest.CreateColumnFamily (very rare); keep watching
Reviewed By: ltamasi
Differential Revision: D35038143
Pulled By: pdillinger
fbshipit-source-id: 0a5478d5be96c135343a00603711b7df43ae19c9
Summary:
Extend Java RocksDB iterators to support indirect byte buffers, to add to the existing support for direct byte buffers.
Code to distinguish direct/indirect buffers is switched in Java, and a 2nd separate JNI call implemented to support indirect
buffers. Indirect support passes contained buffers using byte[]
There are some Java subclasses of iterator (WBWIIterator, SstFileReaderIterator) which also now have parallel JNI support functions implemented, along with direct/indirect switches in Java methods.
Closes https://github.com/facebook/rocksdb/issues/6282
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9222
Reviewed By: ajkr
Differential Revision: D35115283
Pulled By: jay-zhuang
fbshipit-source-id: f8d5d20b975aef700560fbcc99f707bb028dc42e
Summary:
db_bench quietly parses and ignores bad values for --compaction_fadvice and --value_size_distribution_type
I prefer that it fail for them as it does for bad option values in most other cases. Otherwise a benchmark
result will be provided for the wrong configuration and the result will be misleading.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9741
Test Plan:
These now fail:
./db_bench --compaction_fadvice=noney
Unknown compaction fadvice:noney
./db_bench --value_size_distribution_type=norma
Cannot parse distribution type 'norma'
While correct values continue to work:
./db_bench --value_size_distribution_type=normal
Initializing RocksDB Options from the specified file
Initializing RocksDB Options from command-line flags
./db_bench --compaction_fadvice=none
Initializing RocksDB Options from the specified file
Initializing RocksDB Options from command-line flags
Reviewed By: siying
Differential Revision: D35115973
Pulled By: mdcallag
fbshipit-source-id: c2b10de5c2d1ea7c7539e676f5bd556351f5d370
Summary:
DBGet p95 and p99 have high variation, remove them for now.
Also increase the iteration to 3 to avoid false positive.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9742
Test Plan: Internal CI
Reviewed By: ajkr
Differential Revision: D35082820
Pulled By: jay-zhuang
fbshipit-source-id: facc1d56b94e54aa8c8852c207aae2ae4e4924b0
Summary:
When --benchmarks has more than one test then the threads in one benchmark
will use the same set of seeds as the threads in the previous benchmark.
This diff fixe that.
This fixes https://github.com/facebook/rocksdb/issues/9632
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9733
Test Plan:
For this command line the block cache is 8GB, so it caches at most 1024 8KB blocks. Note that without
this diff the second run of readrandom has a much better response time because seed reuse means the
second run reads the same 1000 blocks as the first run and they are cached at that point. But with
this diff that does not happen.
./db_bench --benchmarks=fillseq,flush,compact0,waitforcompaction,levelstats,readrandom,readrandom --compression_type=zlib --num=10000000 --reads=1000 --block_size=8192
...
```
Level Files Size(MB)
--------------------
0 0 0
1 11 238
2 9 253
3 0 0
4 0 0
5 0 0
6 0 0
```
--- perf results without this diff
DB path: [/tmp/rocksdbtest-2260/dbbench]
readrandom : 46.212 micros/op 21618 ops/sec; 2.4 MB/s (1000 of 1000 found)
DB path: [/tmp/rocksdbtest-2260/dbbench]
readrandom : 21.963 micros/op 45450 ops/sec; 5.0 MB/s (1000 of 1000 found)
--- perf results with this diff
DB path: [/tmp/rocksdbtest-2260/dbbench]
readrandom : 47.213 micros/op 21126 ops/sec; 2.3 MB/s (1000 of 1000 found)
DB path: [/tmp/rocksdbtest-2260/dbbench]
readrandom : 42.880 micros/op 23299 ops/sec; 2.6 MB/s (1000 of 1000 found)
Reviewed By: jay-zhuang
Differential Revision: D35089763
Pulled By: mdcallag
fbshipit-source-id: 1b50143a07afe876b8c8e5fa50dd94a8ce57fc6b
Summary:
This updates main branch with a HISTORY update going into
7.1.fb branch before tagging 7.1.0.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9746
Test Plan: HISTORY.md only
Reviewed By: ajkr, hx235
Differential Revision: D35099194
Pulled By: pdillinger
fbshipit-source-id: b74ea8b626118dac235e387038420829850b8da2
Summary:
There is a race condition if WAL tracking in the MANIFEST is enabled in a database that disables 2PC.
The race condition is between two background flush threads trying to install flush results to the MANIFEST.
Consider an example database with two column families: "default" (cfd0) and "cf1" (cfd1). Initially,
both column families have one mutable (active) memtable whose data backed by 6.log.
1. Trigger a manual flush for "cf1", creating a 7.log
2. Insert another key to "default", and trigger flush for "default", creating 8.log
3. BgFlushThread1 finishes writing 9.sst
4. BgFlushThread2 finishes writing 10.sst
```
Time BgFlushThread1 BgFlushThread2
| mutex_.Lock()
| precompute min_wal_to_keep as 6
| mutex_.Unlock()
| mutex_.Lock()
| precompute min_wal_to_keep as 6
| join MANIFEST write queue and mutex_.Unlock()
| write to MANIFEST
| mutex_.Lock()
| cfd1->log_number = 7
| Signal bg_flush_2 and mutex_.Unlock()
| wake up and mutex_.Lock()
| cfd0->log_number = 8
| FindObsoleteFiles() with job_context->log_number == 7
| mutex_.Unlock()
| PurgeObsoleteFiles() deletes 6.log
V
```
As shown in the above, BgFlushThread2 thinks that the min wal to keep is 6.log because "cf1" has unflushed data in 6.log (cf1.log_number=6).
Similarly, BgThread1 thinks that min wal to keep is also 6.log because "default" has unflushed data (default.log_number=6).
No WAL deletion will be written to MANIFEST because 6 is equal to `versions_->wals_.min_wal_number_to_keep`,
due to https://github.com/facebook/rocksdb/blob/7.1.fb/db/memtable_list.cc#L513:L514.
The bg flush thread that finishes last will perform file purging. `job_context.log_number` will be evaluated as 7, i.e.
the min wal that contains unflushed data, causing 6.log to be deleted. However, MANIFEST thinks 6.log should still exist.
If you close the db at this point, you won't be able to re-open it if `track_and_verify_wal_in_manifest` is true.
We must handle the case of multiple bg flush threads, and it is difficult for one bg flush thread to know
the correct min wal number until the other bg flush threads have finished committing to the manifest and updated
the `cfd::log_number`.
To fix this issue, we rename an existing variable `min_log_number_to_keep_2pc` to `min_log_number_to_keep`,
and use it to track WAL file deletion in non-2pc mode as well.
This variable is updated only 1) during recovery with mutex held, or 2) in the MANIFEST write thread.
`min_log_number_to_keep` means RocksDB will delete WALs below it, although there may be WALs
above it which are also obsolete. Formally, we will have [min_wal_to_keep, max_obsolete_wal]. During recovery, we
make sure that only WALs above max_obsolete_wal are checked and added back to `alive_log_files_`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9715
Test Plan:
```
make check
```
Also ran stress test below (with asan) to make sure it completes successfully.
```
TEST_TMPDIR=/dev/shm/rocksdb OPT=-g ASAN_OPTIONS=disable_coredump=0 \
CRASH_TEST_EXT_ARGS=--compression_type=zstd SKIP_FORMAT_BUCK_CHECKS=1 \
make J=52 -j52 blackbox_asan_crash_test
```
Reviewed By: ltamasi
Differential Revision: D34984412
Pulled By: riversand963
fbshipit-source-id: c7b21a8d84751bb55ea79c9f387103d21b231005
Summary:
Originally, a corruption will be returned by `DBImpl::WriteImpl(batch...)` if batch is
null. This is inaccurate since there is no data corruption.
Return `Status::InvalidArgument()` instead.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9744
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D35086268
Pulled By: riversand963
fbshipit-source-id: 677397b007a53bc25210eac0178d49c9797b5951
Summary:
This changes db_bench to fail at startup for invalid compression types. It had been
changing them to Snappy. For other invalid options it fails at startup.
This is for https://github.com/facebook/rocksdb/issues/9621
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9729
Test Plan:
This continues to work:
./db_bench --benchmarks=fillrandom --compression_type=lz4
This now fails rather than changing the compression type to Snappy
./db_bench --benchmarks=fillrandom --compression_type=lz44
Cannot parse compression type 'lz44'
Reviewed By: jay-zhuang
Differential Revision: D35081323
Pulled By: mdcallag
fbshipit-source-id: 9b38c835abddce11aa7feb235df63f53cf829981
Summary:
Bloom filters generated by pre-7.0 releases are not read by
7.0.x releases (and vice-versa) due to changes to FilterPolicy::Name()
in https://github.com/facebook/rocksdb/issues/9590. This can severely impact read performance and read I/O on
upgrade or downgrade with existing DB, but not data correctness.
To fix, we go back using the old, unified name in SST metadata but (for
a while anyway) recognize the aliases that could be generated by early
7.0.x releases. This unfortunately requires a public API change to avoid
interfering with all the good changes from https://github.com/facebook/rocksdb/issues/9590, but the API change
only affects users with custom FilterPolicy, which should be very few.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9736
Test Plan:
manual
Generate DBs with
```
./db_bench.7.0 -db=/dev/shm/rocksdb.7.0 -bloom_bits=10 -cache_index_and_filter_blocks=1 -benchmarks=fillrandom -num=10000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0
```
and similar. Compare with
```
for IMPL in 6.29 7.0 fixed; do for DB in 6.29 7.0 fixed; do echo "Testing $IMPL on $DB:"; ./db_bench.$IMPL -db=/dev/shm/rocksdb.$DB -use_existing_db -readonly -bloom_bits=10 -benchmarks=readrandom -num=10000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -duration=10 2>&1 | grep micros/op; done; done
```
Results:
```
Testing 6.29 on 6.29:
readrandom : 34.381 micros/op 29085 ops/sec; 3.2 MB/s (291999 of 291999 found)
Testing 6.29 on 7.0:
readrandom : 190.443 micros/op 5249 ops/sec; 0.6 MB/s (52999 of 52999 found)
Testing 6.29 on fixed:
readrandom : 40.148 micros/op 24907 ops/sec; 2.8 MB/s (249999 of 249999 found)
Testing 7.0 on 6.29:
readrandom : 229.430 micros/op 4357 ops/sec; 0.5 MB/s (43999 of 43999 found)
Testing 7.0 on 7.0:
readrandom : 33.348 micros/op 29986 ops/sec; 3.3 MB/s (299999 of 299999 found)
Testing 7.0 on fixed:
readrandom : 152.734 micros/op 6546 ops/sec; 0.7 MB/s (65999 of 65999 found)
Testing fixed on 6.29:
readrandom : 32.024 micros/op 31224 ops/sec; 3.5 MB/s (312999 of 312999 found)
Testing fixed on 7.0:
readrandom : 33.990 micros/op 29390 ops/sec; 3.3 MB/s (294999 of 294999 found)
Testing fixed on fixed:
readrandom : 28.714 micros/op 34825 ops/sec; 3.9 MB/s (348999 of 348999 found)
```
Just paying attention to order of magnitude of ops/sec (short test
durations, lots of noise), it's clear that with the fix we can read <= 6.29
& >= 7.0 at full speed, where neither 6.29 nor 7.0 can on both. And 6.29
release can properly read fixed DB at full speed.
Reviewed By: siying, ajkr
Differential Revision: D35057844
Pulled By: pdillinger
fbshipit-source-id: a46893a6af4bf084375ebe4728066d00eb08f050
Summary:
Before this PR, the following command prints only the default column
family's information in the end:
```
ldb --db=. --hex manifest_dump --verbose
```
We should print all column families instead.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9719
Test Plan:
`make check` makes sure nothing breaks.
Generate a DB, use the above command to verify all column families are
printed.
Reviewed By: akankshamahajan15
Differential Revision: D34992453
Pulled By: riversand963
fbshipit-source-id: de1d38c4539cd89f74e1a6240ad7a6e2416bf198
Summary:
…in order
This fixes https://github.com/facebook/rocksdb/issues/9650
For db_bench --benchmarks=fillseq --num_multi_db=X it loads databases in sequence
rather than randomly choosing a database per Put. The benefits are:
1) avoids long delays between flushing memtables
2) avoids flushing memtables for all of them at the same point in time
3) puts same number of keys per database so that query tests will find keys as expected
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9713
Test Plan:
Using db_bench.1 without the change and db_bench.2 with the change:
for i in 1 2; do rm -rf /data/m/rx/* ; time ./db_bench.$i --db=/data/m/rx --benchmarks=fillseq --num_multi_db=4 --num=10000000; du -hs /data/m/rx ; done
--- without the change
fillseq : 3.188 micros/op 313682 ops/sec; 34.7 MB/s
real 2m7.787s
user 1m52.776s
sys 0m46.549s
2.7G /data/m/rx
--- with the change
fillseq : 3.149 micros/op 317563 ops/sec; 35.1 MB/s
real 2m6.196s
user 1m51.482s
sys 0m46.003s
2.7G /data/m/rx
Also, temporarily added a printf to confirm that the code switches to the next database at the right time
ZZ switch to db 1 at 10000000
ZZ switch to db 2 at 20000000
ZZ switch to db 3 at 30000000
for i in 1 2; do rm -rf /data/m/rx/* ; time ./db_bench.$i --db=/data/m/rx --benchmarks=fillseq,readrandom --num_multi_db=4 --num=100000; du -hs /data/m/rx ; done
--- without the change, smaller database, note that not all keys are found by readrandom because databases have < and > --num keys
fillseq : 3.176 micros/op 314805 ops/sec; 34.8 MB/s
readrandom : 1.913 micros/op 522616 ops/sec; 57.7 MB/s (99873 of 100000 found)
--- with the change, smaller database, note that all keys are found by readrandom
fillseq : 3.110 micros/op 321566 ops/sec; 35.6 MB/s
readrandom : 1.714 micros/op 583257 ops/sec; 64.5 MB/s (100000 of 100000 found)
Reviewed By: jay-zhuang
Differential Revision: D35030168
Pulled By: mdcallag
fbshipit-source-id: 2a18c4ec571d954cf5a57b00a11802a3608823ee
Summary:
The param name force_erase may be misleading, since the handle is erased only if it has last reference even if the param is set true.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9728
Reviewed By: pdillinger
Differential Revision: D35038673
Pulled By: gitbw95
fbshipit-source-id: 0d16d1e8fed17b97eba7fb53207119332f659a5f
Summary:
Changes:
* improves monitoring by displaying average size of a Put value and average scan length
* forces the minimum value size to be 10. Before this it was 0 if you didn't set the distribution parameters.
* uses reasonable defaults for the distribution parameters that determine value size and scan length
* includes seeks in "reads ... found" message, before this they were missing
This is for https://github.com/facebook/rocksdb/issues/9672
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9711
Test Plan:
Before this change:
./db_bench --benchmarks=fillseq,mixgraph --mix_get_ratio=50 --mix_put_ratio=25 --mix_seek_ratio=25 --num=100000 --value_k=0.2615 --value_sigma=25.45 --iter_k=2.517 --iter_sigma=14.236
fillseq : 4.289 micros/op 233138 ops/sec; 25.8 MB/s
mixgraph : 18.461 micros/op 54166 ops/sec; 755.0 MB/s ( Gets:50164 Puts:24919 Seek:24917 of 50164 in 75081 found)
After this change:
./db_bench --benchmarks=fillseq,mixgraph --mix_get_ratio=50 --mix_put_ratio=25 --mix_seek_ratio=25 --num=100000 --value_k=0.2615 --value_sigma=25.45 --iter_k=2.517 --iter_sigma=14.236
fillseq : 3.974 micros/op 251553 ops/sec; 27.8 MB/s
mixgraph : 16.722 micros/op 59795 ops/sec; 833.5 MB/s ( Gets:50164 Puts:24919 Seek:24917, reads 75081 in 75081 found, avg size: 36.0 value, 504.9 scan)
Reviewed By: jay-zhuang
Differential Revision: D35030190
Pulled By: mdcallag
fbshipit-source-id: d8f555f28d869f752ddb674a524108884511b151
Summary:
Multiplier here should be 1e6 to get microseconds.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9695
Reviewed By: ajkr
Differential Revision: D34897086
Pulled By: jay-zhuang
fbshipit-source-id: 9c1d0811ea740ba0a007edc2da199edbd000b88b
Summary:
In FilePrefetchBuffer if reads are sequential, after prefetching call ReadAsync API to prefetch data asynchronously so that in next prefetching data will be available. Data prefetched asynchronously will be readahead_size/2. It uses two buffers, one for synchronous prefetching and one for asynchronous. In case, the data is overlapping, the data is copied from both buffers to third buffer to make it continuous.
This feature is under ReadOptions::async_io and is under experimental.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9674
Test Plan:
1. Add new unit tests
2. Run **db_stress** to make sure nothing crashes.
- Normal prefetch without `async_io` ran successfully:
```
export CRASH_TEST_EXT_ARGS=" --async_io=0"
make crash_test -j
```
3. **Run Regressions**.
i) Main branch without any change for normal prefetching with async_io disabled:
```
./db_bench -db=/tmp/prefix_scan_prefetch_main -benchmarks="fillseq" -key_size=32 -value_size=512 -num=5000000 -
use_direct_io_for_flush_and_compaction=true -target_file_size_base=16777216
```
```
./db_bench -use_existing_db=true -db=/tmp/prefix_scan_prefetch_main -benchmarks="seekrandom" -key_size=32 -value_size=512 -num=5000000 -use_direct_reads=true -seek_nexts=327680 -duration=120 -ops_between_duration_checks=1
Initializing RocksDB Options from the specified file
Initializing RocksDB Options from command-line flags
RocksDB: version 7.0
Date: Thu Mar 17 13:11:34 2022
CPU: 24 * Intel Core Processor (Broadwell)
CPUCache: 16384 KB
Keys: 32 bytes each (+ 0 bytes user-defined timestamp)
Values: 512 bytes each (256 bytes after compression)
Entries: 5000000
Prefix: 0 bytes
Keys per prefix: 0
RawSize: 2594.0 MB (estimated)
FileSize: 1373.3 MB (estimated)
Write rate: 0 bytes/second
Read rate: 0 ops/second
Compression: Snappy
Compression sampling rate: 0
Memtablerep: SkipListFactory
Perf Level: 1
------------------------------------------------
DB path: [/tmp/prefix_scan_prefetch_main]
seekrandom : 483618.390 micros/op 2 ops/sec; 338.9 MB/s (249 of 249 found)
```
ii) normal prefetching after changes with async_io disable:
```
./db_bench -use_existing_db=true -db=/tmp/prefix_scan_prefetch_withchange -benchmarks="seekrandom" -key_size=32 -value_size=512 -num=5000000 -use_direct_reads=true -seek_nexts=327680 -duration=120 -ops_between_duration_checks=1
Initializing RocksDB Options from the specified file
Initializing RocksDB Options from command-line flags
RocksDB: version 7.0
Date: Thu Mar 17 14:11:31 2022
CPU: 24 * Intel Core Processor (Broadwell)
CPUCache: 16384 KB
Keys: 32 bytes each (+ 0 bytes user-defined timestamp)
Values: 512 bytes each (256 bytes after compression)
Entries: 5000000
Prefix: 0 bytes
Keys per prefix: 0
RawSize: 2594.0 MB (estimated)
FileSize: 1373.3 MB (estimated)
Write rate: 0 bytes/second
Read rate: 0 ops/second
Compression: Snappy
Compression sampling rate: 0
Memtablerep: SkipListFactory
Perf Level: 1
------------------------------------------------
DB path: [/tmp/prefix_scan_prefetch_withchange]
seekrandom : 471347.227 micros/op 2 ops/sec; 348.1 MB/s (255 of 255 found)
```
Reviewed By: anand1976
Differential Revision: D34731543
Pulled By: akankshamahajan15
fbshipit-source-id: 8e23aa93453d5fe3c672b9231ad582f60207937f
Summary:
The goal of this change is to allow changes to the "current" (in
FileSystem) file temperatures to feed back into DB metadata, so that
they can inform decisions and stats reporting. In part because of
modular code factoring, it doesn't seem easy to do this automagically,
where opening an SST file and observing current Temperature different
from expected would trigger a change in metadata and DB manifest write
(essentially giving the deep read path access to the write path). It is also
difficult to do this while the DB is open because of the limitations of
LogAndApply.
This change allows updating file temperature metadata on a closed DB
using an experimental utility function UpdateManifestForFilesState()
or `ldb update_manifest --update_temperatures`. This should suffice for
"migration" scenarios where outside tooling has placed or re-arranged DB
files into a (different) tiered configuration without going through
RocksDB itself (currently, only compaction can change temperature
metadata).
Some details:
* Refactored and added unit test for `ldb unsafe_remove_sst_file` because
of shared functionality
* Pulled in autovector.h changes from https://github.com/facebook/rocksdb/issues/9546 to fix SuperVersionContext
move constructor (related to an older draft of this change)
Possible follow-up work:
* Support updating manifest with file checksums, such as when a
new checksum function is used and want existing DB metadata updated
for it.
* It's possible that for some repair scenarios, lighter weight than
full repair, we might want to support UpdateManifestForFilesState() to
modify critical file details like size or checksum using same
algorithm. But let's make sure these are differentiated from modifying
file details in ways that don't suspect corruption (or require extreme
trust).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9683
Test Plan: unit tests added
Reviewed By: jay-zhuang
Differential Revision: D34798828
Pulled By: pdillinger
fbshipit-source-id: cfd83e8fb10761d8c9e7f9c020d68c9106a95554
Summary:
On CircleCI MacOS instances, we have been seeing the following assertion error:
```
Assertion failed: (alive_log_files_tail_ == alive_log_files_.rbegin()), function WriteToWAL, file /Users/distiller/project/db/db_impl/db_impl_write.cc, line 1213.
Received signal 6 (Abort trap: 6)
#0 0x1
https://github.com/facebook/rocksdb/issues/1 abort (in libsystem_c.dylib) + 120
https://github.com/facebook/rocksdb/issues/2 err (in libsystem_c.dylib) + 0
https://github.com/facebook/rocksdb/issues/3 rocksdb::DBImpl::WriteToWAL(rocksdb::WriteBatch const&, rocksdb::log::Writer*, unsigned long long*, unsigned long long*, rocksdb::Env::IOPriority, bool, bool) (in librocksdb.7.0.0.dylib) (db_impl_write.cc:1213)
https://github.com/facebook/rocksdb/issues/4 rocksdb::DBImpl::WriteToWAL(rocksdb::WriteThread::WriteGroup const&, rocksdb::log::Writer*, unsigned long long*, bool, bool, unsigned long long) (in librocksdb.7.0.0.dylib) (db_impl_write.cc:1251)
https://github.com/facebook/rocksdb/issues/5 rocksdb::DBImpl::WriteImpl(rocksdb::WriteOptions const&, rocksdb::WriteBatch*, rocksdb::WriteCallback*, unsigned long long*, unsigned long long, bool, unsigned long long*, unsigned long, rocksdb::PreReleaseCallback*) (in librocksdb.7.0.0.dylib) (db_impl_ rite.cc:421)
https://github.com/facebook/rocksdb/issues/6 rocksdb::DBImpl::Write(rocksdb::WriteOptions const&, rocksdb::WriteBatch*) (in librocksdb.7.0.0.dylib) (db_impl_write.cc:109)
https://github.com/facebook/rocksdb/issues/7 rocksdb::DB::Put(rocksdb::WriteOptions const&, rocksdb::ColumnFamilyHandle*, rocksdb::Slice const&, rocksdb::Slice const&, rocksdb::Slice const&) (in librocksdb.7.0.0.dylib) (db_impl_write.cc:2159)
https://github.com/facebook/rocksdb/issues/8 rocksdb::DBImpl::Put(rocksdb::WriteOptions const&, rocksdb::ColumnFamilyHandle*, rocksdb::Slice const&, rocksdb::Slice const&, rocksdb::Slice const&) (in librocksdb.7.0.0.dylib) (db_impl_write.cc:37)
https://github.com/facebook/rocksdb/issues/9 rocksdb::DB::Put(rocksdb::WriteOptions const&, rocksdb::Slice const&, rocksdb::Slice const&, rocksdb::Slice const&) (in librocksdb.7.0.0.dylib) (db.h:382)
https://github.com/facebook/rocksdb/issues/10 rocksdb::DBBasicTestWithTimestampPrefixSeek_IterateWithPrefix_Test::TestBody() (in db_with_timestamp_basic_test) (db_with_timestamp_basic_test.cc:2926)
https://github.com/facebook/rocksdb/issues/11 void testing::internal::HandleSehExceptionsInMethodIfSupported<testing::Test, void>(testing::Test*, void (testing::Test::*)(), char const*) (in db_with_timestamp_basic_test) (gtest-all.cc:3899)
https://github.com/facebook/rocksdb/issues/12 void testing::internal::HandleExceptionsInMethodIfSupported<testing::Test, void>(testing::Test*, void (testing::Test::*)(), char const*) (in db_with_timestamp_basic_test) (gtest-all.cc:3935)
https://github.com/facebook/rocksdb/issues/13 testing::Test::Run() (in db_with_timestamp_basic_test) (gtest-all.cc:3980)
https://github.com/facebook/rocksdb/issues/14 testing::TestInfo::Run() (in db_with_timestamp_basic_test) (gtest-all.cc:4153)
https://github.com/facebook/rocksdb/issues/15 testing::TestCase::Run() (in db_with_timestamp_basic_test) (gtest-all.cc:4266)
https://github.com/facebook/rocksdb/issues/16 testing::internal::UnitTestImpl::RunAllTests() (in db_with_timestamp_basic_test) (gtest-all.cc:6632)
https://github.com/facebook/rocksdb/issues/17 bool testing::internal::HandleSehExceptionsInMethodIfSupported<testing::internal::UnitTestImpl, bool>(testing::internal::UnitTestImpl*, bool (testing::internal::UnitTestImpl::*)(), char const*) (in db_with_timestamp_basic_test) (gtest-all.cc:3899)
https://github.com/facebook/rocksdb/issues/18 bool testing::internal::HandleExceptionsInMethodIfSupported<testing::internal::UnitTestImpl, bool>(testing::internal::UnitTestImpl*, bool (testing::internal::UnitTestImpl::*)(), char const*) (in db_with_timestamp_basic_test) (gtest-all.cc:3935)
https://github.com/facebook/rocksdb/issues/19 testing::UnitTest::Run() (in db_with_timestamp_basic_test) (gtest-all.cc:6242)
https://github.com/facebook/rocksdb/issues/20 RUN_ALL_TESTS() (in db_with_timestamp_basic_test) (gtest.h:22110)
https://github.com/facebook/rocksdb/issues/21 main (in db_with_timestamp_basic_test) (db_with_timestamp_basic_test.cc:3150)
https://github.com/facebook/rocksdb/issues/22 start (in libdyld.dylib) + 1
```
It's likely caused by concurrent, unprotected access to the deque, even though `back()` is never popped,
and we are comparing `rbegin()` with a cached `riterator`. To be safe, do the comparison only if we have mutex.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9717
Test Plan:
One example
Ssh to one CircleCI MacOS instance.
```
gtest-parallel -r 1000 -w 8 ./db_test --gtest_filter=DBTest.FlushesInParallelWithCompactRange
```
Reviewed By: pdillinger
Differential Revision: D34990696
Pulled By: riversand963
fbshipit-source-id: 62dd48ae6fedbda53d0a64d73de9b948b4c26eee
Summary:
The primary goal of this change is to add support for backing up and
restoring (applying on restore) file temperature metadata, without
committing to either the DB manifest or the FS reported "current"
temperatures being exclusive "source of truth".
To achieve this goal, we need to add temperature information to backup
metadata, which requires updated backup meta schema. Fortunately I
prepared for this in https://github.com/facebook/rocksdb/issues/8069, which began forward compatibility in version
6.19.0 for this kind of schema update. (Previously, backup meta schema
was not extensible! Making this schema update public will allow some
other "nice to have" features like taking backups with hard links, and
avoiding crc32c checksum computation when another checksum is already
available.) While schema version 2 is newly public, the default schema
version is still 1. Until we change the default, users will need to set
to 2 to enable features like temperature data backup+restore. New
metadata like temperature information will be ignored with a warning
in versions before this change and since 6.19.0. The metadata is
considered ignorable because a functioning DB can be restored without
it.
Some detail:
* Some renaming because "future schema" is now just public schema 2.
* Initialize some atomics in TestFs (linter reported)
* Add temperature hint support to SstFileDumper (used by BackupEngine)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9660
Test Plan:
related unit test majorly updated for the new functionality,
including some shared testing support for tracking temperatures in a FS.
Some other tests and testing hooks into production code also updated for
making the backup meta schema change public.
Reviewed By: ajkr
Differential Revision: D34686968
Pulled By: pdillinger
fbshipit-source-id: 3ac1fa3e67ee97ca8a5103d79cc87d872c1d862a
Summary:
The designed sync point may not be hit if trash file is generated faster
than deleting. Then the file will be deleted directly instead of waiting
for background trash empty thread to do it.
Increase SstFileManager Trash/DB ratio to avoid that.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9706
Test Plan:
`gtest-parallel ./delete_scheduler_test
--gtest_filter=DeleteSchedulerTest.StartBGEmptyTrashMultipleTimes -r
10000 -w 100`
It was likely to happen on one of the host.
Reviewed By: riversand963
Differential Revision: D34964735
Pulled By: jay-zhuang
fbshipit-source-id: bb78015489b5f6b3f11783aae7e5853ea197702c
Summary:
some Makefile refactoring to support Meta-internal workflows,
and add a basic crash_test flow to CircleCI
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9702
Test Plan: CI
Reviewed By: riversand963
Differential Revision: D34934315
Pulled By: pdillinger
fbshipit-source-id: 67f17280096d8968d8e44459293f72fb6fe339f3
Summary:
Fix and enhance the background error recovery logic to handle the
following situations -
1. Background read errors during flush/compaction (previously was
resulting in unrecoverable state)
2. Fix auto recovery failure on read/write errors during atomic flush.
It was failing due to a bug in setting the resuming_from_bg_err variable
in AtomicFlushMemTablesToOutputFiles.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9679
Test Plan: Add new unit tests in error_handler_fs_test
Reviewed By: riversand963
Differential Revision: D34770097
Pulled By: anand1976
fbshipit-source-id: 136da973a28d684b9c74bdf668519b0cbbbe1742
Summary:
In https://github.com/facebook/rocksdb/issues/9659, when `DisableManualCompaction()` is issued, the foreground
manual compaction thread does not have to wait background compaction
thread to finish. Which could be a problem that the user re-enable
manual compaction with `EnableManualCompaction()`, it may re-enable the
BG compaction which supposed be cancelled.
This patch makes the FG compaction wait on
`manual_compaction_state.done`, which either be set by BG compaction or
Unschedule callback. Then when FG manual compaction thread returns, it
should not have BG compaction running. So shared_ptr is no longer needed
for `manual_compaction_state`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9694
Test Plan: a StressTest and unittest
Reviewed By: ajkr
Differential Revision: D34885472
Pulled By: jay-zhuang
fbshipit-source-id: e6476175b43e8c59cd49f5c09241036a0716c274
Summary:
PR9686 makes `WriteToWAL()` call `assert(...!=rend())` while not holding
db mutex or log mutex. Another thread may concurrently call
`pop_front()`, causing race condition.
To fix, assert only if mutex is held.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9698
Test Plan: COMPILE_WITH_TSAN=1 make check
Reviewed By: jay-zhuang
Differential Revision: D34898535
Pulled By: riversand963
fbshipit-source-id: 1ddfa5bf1b6ae8d409cab6ff6e1b5321c6803da9
Summary:
In the original code, the value of `NO_FILE_OPENS` corresponding to the Ticker item will be increased regardless of whether the file is successfully opened or not. Even counts are repeated, which can lead to skewed counts.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9677
Reviewed By: jay-zhuang
Differential Revision: D34725733
Pulled By: ajkr
fbshipit-source-id: 841234ed03802c0105fd2107d82a740265ead576
