Summary:
When user doesn't set a limit on compaction output file size, let's use the sum of the input files' sizes. This will avoid passing UINT64_MAX as fallocate()'s length. Reported in #2249.
Test setup:
- command: `TEST_TMPDIR=/data/rocksdb-test/ strace -e fallocate ./db_compaction_test --gtest_filter=DBCompactionTest.ManualCompactionUnknownOutputSize`
- filesystem: xfs
before this diff:
`fallocate(10, 01, 0, 1844674407370955160) = -1 ENOSPC (No space left on device)`
after this diff:
`fallocate(10, 01, 0, 1977) = 0`
Closes https://github.com/facebook/rocksdb/pull/2252
Differential Revision: D5007275
Pulled By: ajkr
fbshipit-source-id: 4491404a6ae8a41328aede2e2d6f4d9ac3e38880
Summary:
The goal is to avoid the problem of small number of L0 files triggering compaction to base level (which increased write-amp), while still allowing L0 compaction-by-size (so intra-L0 compactions cause score to increase).
Closes https://github.com/facebook/rocksdb/pull/2172
Differential Revision: D4908552
Pulled By: ajkr
fbshipit-source-id: 4b170142b2b368e24bd7948b2a6f24c69fabf73d
Summary:
Add a function to allow users to reset internal stats without restarting the DB.
Closes https://github.com/facebook/rocksdb/pull/2167
Differential Revision: D4907939
Pulled By: siying
fbshipit-source-id: ab2dd85b88aabe9380da7485320a1d460d3e1f68
Summary:
Replace Options::use_direct_writes with Options::use_direct_io_for_flush_and_compaction
Now if Options::use_direct_io_for_flush_and_compaction = true, we will enable direct io for both reads and writes for flush and compaction job. Whereas Options::use_direct_reads controls user reads like iterator and Get().
Closes https://github.com/facebook/rocksdb/pull/2117
Differential Revision: D4860912
Pulled By: lightmark
fbshipit-source-id: d93575a8a5e780cf7e40797287edc425ee648c19
Summary:
Moved MergeOperatorPinning tests from db_test2.cc to db_merge_operator_test.cc.
[This is the same code as PR #2104 , which has already been reviewed, but I am creating a new PR as I cannot import from #2104 onto phabricator anymore even after rebasing. I'll close and discard #2104.]
Closes https://github.com/facebook/rocksdb/pull/2125
Differential Revision: D4863312
Pulled By: sagar0
fbshipit-source-id: 0f71a7690aa09c1d03ee85ce2bc1d2d89e4f4399
Summary:
Currently level histogram is only printed out for DB stats and for default CF. This is confusing. Change to print for every CF instead.
Closes https://github.com/facebook/rocksdb/pull/2126
Differential Revision: D4865373
Pulled By: siying
fbshipit-source-id: 1c853e0ac66e00120ee931cabc9daf69ccc2d577
Summary:
Extend TransactionOptions to include max_write_batch_size which determines the maximum size of the writebatch representation. If memory limit is exceeded, the operation will abort with subcode kMemoryLimit.
Closes https://github.com/facebook/rocksdb/pull/2124
Differential Revision: D4861842
Pulled By: lth
fbshipit-source-id: 46fd172ea67cc90bbba829bf0d70cfab2261c161
Summary:
also did minor refactoring
Closes https://github.com/facebook/rocksdb/pull/2115
Differential Revision: D4855818
Pulled By: maysamyabandeh
fbshipit-source-id: fbca6ac57e5c6677fffe8354f7291e596a50cb77
Summary:
DBIter, and in-turn NewDBIterator and NewArenaWrappedDBIterator, take a bunch of params. They can be reduced by passing in ReadOptions directly instead of passing in every new param separately. It also seems much cleaner as a bunch of the params towards the end seem to be optional.
(Recently I introduced max_skippable_internal_keys, which added one more to the already huge count).
Idea courtesy IslamAbdelRahman
Closes https://github.com/facebook/rocksdb/pull/2116
Differential Revision: D4857128
Pulled By: sagar0
fbshipit-source-id: 7d239df094b94bd9ea79d145cdf825478ac037a8
Summary:
1. Move universal compaction picker to separate files compaction_picker_universal.cc and compaction_picker_universal.h.
2. Rename some functions to make the code easier to understand.
3. Move leveled compaction picking code to a dedicated class, so that we we don't need to pass some common variable around when calling functions. It also allowed us to break down LevelCompactionPicker::PickCompaction() to smaller functions.
Closes https://github.com/facebook/rocksdb/pull/2100
Differential Revision: D4845948
Pulled By: siying
fbshipit-source-id: efa0ab4
Summary:
This is an effort to club all string related utility functions into one common place, in string_util, so that it is easier for everyone to know what string processing functions are available. Right now they seem to be spread out across multiple modules, like logging and options_helper.
Check the sub-commits for easier reviewing.
Closes https://github.com/facebook/rocksdb/pull/2094
Differential Revision: D4837730
Pulled By: sagar0
fbshipit-source-id: 344278a
Summary:
siying this is a resubmission of #2081 with the 4th commit fixed. From that commit message:
> Note that the previous use of quotes in PLATFORM_{CC,CXX}FLAGS was
incorrect and caused GCC to produce the incorrect define:
>
> #define ROCKSDB_JEMALLOC -DJEMALLOC_NO_DEMANGLE 1
>
> This was the cause of the Linux build failure on the previous version
of this change.
I've tested this locally, and the Linux build succeeds now.
Closes https://github.com/facebook/rocksdb/pull/2097
Differential Revision: D4839964
Pulled By: siying
fbshipit-source-id: cc51322
Summary:
Move some files under util/ to new directories env/, monitoring/ options/ and cache/
Closes https://github.com/facebook/rocksdb/pull/2090
Differential Revision: D4833681
Pulled By: siying
fbshipit-source-id: 2fd8bef
Summary:
db_impl.cc is too large to manage. Divide db_impl.cc into db/db_impl.cc, db/db_impl_compaction_flush.cc, db/db_impl_files.cc, db/db_impl_open.cc and db/db_impl_write.cc.
Closes https://github.com/facebook/rocksdb/pull/2095
Differential Revision: D4838188
Pulled By: siying
fbshipit-source-id: c5f3059
Summary:
Level-based L0->L0 compaction operates on spans of files that aren't currently being compacted. It reduces the number of L0 files, thus making write stall conditions harder to reach.
- L0->L0 is triggered when base level is unavailable due to pending compactions
- L0->L0 always outputs one file of at most `max_level0_burst_file_size` bytes.
- Subcompactions are disabled for L0->L0 since we want to output one file.
- Input files are chosen as the longest span of available files that will fit within the size limit. This minimizes number of files in L0.
Closes https://github.com/facebook/rocksdb/pull/2027
Differential Revision: D4760318
Pulled By: ajkr
fbshipit-source-id: 9d07183
Summary:
to void future bug that caused by the mix of userkey/internalkey
Closes https://github.com/facebook/rocksdb/pull/2084
Differential Revision: D4825889
Pulled By: lightmark
fbshipit-source-id: 28411db
Summary:
Refactor WriteImpl() so when I plug-in the pipeline write code (which is
an alternative approach for WriteThread), some of the logic can be
reuse. I split out the following methods from WriteImpl():
* PreprocessWrite()
* HandleWALFull() (previous MaybeFlushColumnFamilies())
* HandleWriteBufferFull()
* WriteToWAL()
Also adding a constructor to WriteThread::Writer, and move WriteContext into db_impl.h.
No real logic change in this patch.
Closes https://github.com/facebook/rocksdb/pull/2042
Differential Revision: D4781014
Pulled By: yiwu-arbug
fbshipit-source-id: d45ca18
Summary:
It is confusing to have auto_roll_logger to stay under db/, which has nothing to do with database. Move filename together as it is a dependency.
Closes https://github.com/facebook/rocksdb/pull/2080
Differential Revision: D4821141
Pulled By: siying
fbshipit-source-id: ca7d768
Summary:
auto_roll_logger_test relies on timing conditon that some operations finish within 1 seconds. This caused flaky tests. Move away from real timing and sleep and use fake time to verify the time-based rolling.
Closes https://github.com/facebook/rocksdb/pull/2066
Differential Revision: D4810647
Pulled By: siying
fbshipit-source-id: c54d994
Summary:
`uint` is nonstandard and not a built-in type on all compilers; replace it
with the always-valid `unsigned int`. I assume this went unnoticed because
it's inside an `#ifdef ROCKDB_JEMALLOC`.
Closes https://github.com/facebook/rocksdb/pull/2075
Differential Revision: D4820427
Pulled By: ajkr
fbshipit-source-id: 0876561
Summary:
Previously it always showed 0.0 for L0 write-amp because we were dividing by bytes read from non-output level. For L0, we should instead divide by bytes ingested to the DB. Note the numerator (bytes written to L0) includes flush bytes.
Closes https://github.com/facebook/rocksdb/pull/2078
Differential Revision: D4816902
Pulled By: ajkr
fbshipit-source-id: 7dca31a
Summary:
There still are many warnings (most of them about invalid printf format
for long long), but it builds if FAIL_ON_WARNINGS is disabled.
Closes https://github.com/facebook/rocksdb/pull/2052
Differential Revision: D4807355
Pulled By: siying
fbshipit-source-id: ef03786
Summary:
Operations like Seek/Next/Prev sometimes take too long to complete when there are many internal keys to be skipped. Adding an option, max_skippable_internal_keys -- which could be used to set a threshold for the maximum number of keys that can be skipped, will help to address these cases where it is much better to fail a request (as incomplete) than to wait for a considerable time for the request to complete.
This feature -- to fail an iterator seek request as incomplete, is disabled by default when max_skippable_internal_keys = 0. It is enabled only when max_skippable_internal_keys > 0.
This feature is based on the discussion mentioned in the PR https://github.com/facebook/rocksdb/pull/1084.
Closes https://github.com/facebook/rocksdb/pull/2000
Differential Revision: D4753223
Pulled By: sagar0
fbshipit-source-id: 1c973f7
Summary:
Add two DB properties: rocksdb.actual_delayed_write_rate and rocksdb.is_write_stooped, for people to know whether current writes are being throttled.
Closes https://github.com/facebook/rocksdb/pull/2043
Differential Revision: D4782975
Pulled By: siying
fbshipit-source-id: 6b2f5cf
Summary:
Allow the users to specify the target index partition size.
With this patch an index partition is cut before its estimated in-memory size goes above the configured value for metadata_block_size. The filter partitions are still cut right after an index partition is cut.
Closes https://github.com/facebook/rocksdb/pull/2041
Differential Revision: D4780216
Pulled By: maysamyabandeh
fbshipit-source-id: 95a0831
Summary:
I've added functions to the C API to support WriteBatchWithIndex as requested in #1833.
I've also added unit tests to c_test
I've implemented the WriteBatchWithIndex variation of every function available for regular WriteBatch. And added additional functions unique to WriteBatchWithIndex.
For now, the following is omitted:
1. The ability to create WriteBatchWithIndex's custom batch-only iterator as I'm not sure what its purpose is. It should be possible to add later if anyone wants it.
2. The ability to create the batch with a fallback comparator, since it appears to be unnecessary. I believe the column family comparator will be used for this, meaning those using a custom comparator can just use the column family variations.
Closes https://github.com/facebook/rocksdb/pull/1985
Differential Revision: D4760039
Pulled By: siying
fbshipit-source-id: 393227e
Summary:
MemTableInserter default constructs Post processing info
std::map. However, on Windows with 2015 STL the default
constructed map still dynamically allocates one node
which shows up on a profiler and we loose ~40% throughput
on fillrandom benchmark.
Solution: declare a map as std::aligned storage and optionally
construct.
This addresses https://github.com/facebook/rocksdb/issues/1976
Before:
-------------------------------------------------------------------
Initializing RocksDB Options from command-line flags
DB path: [k:\data\BulkLoadRandom_10M_fillonly]
fillrandom : 2.775 micros/op 360334 ops/sec; 280.4 MB/s
Microseconds per write:
Count: 10000000 Average: 2.7749 StdDev: 39.92
Min: 1 Median: 2.0826 Max: 26051
Percentiles: P50: 2.08 P75: 2.55 P99: 3.55 P99.9: 9.58 P99.99: 51.5**6
------------------------------------------------------
After:
Initializing RocksDB Options from command-line flags
DB path: [k:\data\BulkLoadRandom_10M_fillon
Closes https://github.com/facebook/rocksdb/pull/2011
Differential Revision: D4740823
Pulled By: siying
fbshipit-source-id: 1daaa2c
Summary:
Previously, when DB write buffer size triggers, we always pick the CF with most data in its memtable to flush. This approach can minimize total flush happens. Change the behavior to always pick the oldest unflushed CF, which makes it the same behavior when max_total_wal_size hits. This approach will minimize size used by max_total_wal_size.
Closes https://github.com/facebook/rocksdb/pull/1987
Differential Revision: D4703214
Pulled By: siying
fbshipit-source-id: 9ff8b09
Summary:
PinnableSlice
Summary:
Currently the point lookup values are copied to a string provided by the
user. This incures an extra memcpy cost. This patch allows doing point lookup
via a PinnableSlice which pins the source memory location (instead of
copying their content) and releases them after the content is consumed
by the user. The old API of Get(string) is translated to the new API
underneath.
Here is the summary for improvements:
value 100 byte: 1.8% regular, 1.2% merge values
value 1k byte: 11.5% regular, 7.5% merge values
value 10k byte: 26% regular, 29.9% merge values
The improvement for merge could be more if we extend this approach to
pin the merge output and delay the full merge operation until the user
actually needs it. We have put that for future work.
PS:
Sometimes we observe a small decrease in performance when switching from
t5452014 to this patch but with the old Get(string) API. The d
Closes https://github.com/facebook/rocksdb/pull/1756
Differential Revision: D4391738
Pulled By: maysamyabandeh
fbshipit-source-id: 6f3edd3
Summary:
The comparator param in SstFileWriter constructor is redundant as it already exists as a field in options. So the current SstFileWriter constructor should be deprecated in favor of a new one which does not take a comparator.
Note that the jni/java apis have not been touched yet.
Closes https://github.com/facebook/rocksdb/pull/1978
Differential Revision: D4685629
Pulled By: sagar0
fbshipit-source-id: 372ce96
Summary:
Add the flag --prefix to the sst_dump tool
This flag is similar to, and exclusive from, the --from flag.
--prefix=0x00FF will return all rows prefixed with 0x00FF.
The --to flag may also be specified and will work as expected.
These changes were used to help in debugging the power cycle corruption issue and theses changes were tested by scanning through a udb.
Closes https://github.com/facebook/rocksdb/pull/1984
Differential Revision: D4691814
Pulled By: reidHoruff
fbshipit-source-id: 027f261
Summary:
Fixing some bugs in MockEnv so it be actually used.
Closes https://github.com/facebook/rocksdb/pull/1914
Differential Revision: D4609923
Pulled By: maysamyabandeh
fbshipit-source-id: ca25735
