Commit Graph

126 Commits

Author SHA1 Message Date
Yanqin Jin
e04f3bce4f Update CURRENT file after best-efforts recovery (#6746)
Summary:
After a successful recovery, the CURRENT file should be updated to point to the valid MANIFEST.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6746

Test Plan: make check

Reviewed By: anand1976

Differential Revision: D21189876

Pulled By: riversand963

fbshipit-source-id: 7537b49988c5c425ebe9505a5cc260de351ad79b
2020-04-23 16:21:09 -07:00
anand76
c1ccd6b6af Implement deadline support for MultiGet (#6710)
Summary:
Initial implementation of ReadOptions.deadline for MultiGet. If the request takes longer than the deadline, the keys not yet found will be returned with Status::TimedOut(). This
implementation enforces the deadline in DBImpl, which is fairly high
level. Its best effort and may not check the deadline after every key
lookup, but may do so after a batch of keys.

In subsequent stages, we will extend this to passing a timeout down to the FileSystem.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6710

Test Plan: Add new unit tests

Reviewed By: riversand963

Differential Revision: D21149158

Pulled By: anand1976

fbshipit-source-id: 9f44eecffeb40873f5034ed59a66d21f9f88879e
2020-04-21 14:51:51 -07:00
Akanksha Mahajan
03a1d95db0 Set max_background_flushes dynamically (#6701)
Summary:
1. Add changes so that max_background_flushes can be set dynamically.
                   2. Add a testcase DBOptionsTest.SetBackgroundFlushThreads which set the
                        max_background_flushes dynamically using SetDBOptions.

TestPlan:  1. make -j64 check
                  2. Using new testcase DBOptionsTest.SetBackgroundFlushThreads
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6701

Reviewed By: ajkr

Differential Revision: D21028010

Pulled By: akankshamahajan15

fbshipit-source-id: 5f949e4a8fd3c32537b637947b7ee09a69cfc7c1
2020-04-20 16:19:02 -07:00
Mike Kolupaev
e45673dece Properly report IO errors when IndexType::kBinarySearchWithFirstKey is used (#6621)
Summary:
Context: Index type `kBinarySearchWithFirstKey` added the ability for sst file iterator to sometimes report a key from index without reading the corresponding data block. This is useful when sst blocks are cut at some meaningful boundaries (e.g. one block per key prefix), and many seeks land between blocks (e.g. for each prefix, the ranges of keys in different sst files are nearly disjoint, so a typical seek needs to read a data block from only one file even if all files have the prefix). But this added a new error condition, which rocksdb code was really not equipped to deal with: `InternalIterator::value()` may fail with an IO error or Status::Incomplete, but it's just a method returning a Slice, with no way to report error instead. Before this PR, this type of error wasn't handled at all (an empty slice was returned), and kBinarySearchWithFirstKey implementation was considered a prototype.

Now that we (LogDevice) have experimented with kBinarySearchWithFirstKey for a while and confirmed that it's really useful, this PR is adding the missing error handling.

It's a pretty inconvenient situation implementation-wise. The error needs to be reported from InternalIterator when trying to access value. But there are ~700 call sites of `InternalIterator::value()`, most of which either can't hit the error condition (because the iterator is reading from memtable or from index or something) or wouldn't benefit from the deferred loading of the value (e.g. compaction iterator that reads all values anyway). Adding error handling to all these call sites would needlessly bloat the code. So instead I made the deferred value loading optional: only the call sites that may use deferred loading have to call the new method `PrepareValue()` before calling `value()`. The feature is enabled with a new bool argument `allow_unprepared_value` to a bunch of methods that create iterators (it wouldn't make sense to put it in ReadOptions because it's completely internal to iterators, with virtually no user-visible effect). Lmk if you have better ideas.

Note that the deferred value loading only happens for *internal* iterators. The user-visible iterator (DBIter) always prepares the value before returning from Seek/Next/etc. We could go further and add an API to defer that value loading too, but that's most likely not useful for LogDevice, so it doesn't seem worth the complexity for now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6621

Test Plan: make -j5 check . Will also deploy to some logdevice test clusters and look at stats.

Reviewed By: siying

Differential Revision: D20786930

Pulled By: al13n321

fbshipit-source-id: 6da77d918bad3780522e918f17f4d5513d3e99ee
2020-04-15 17:40:44 -07:00
Steven Fackler
f53cdab3d7 Hex encode keys in compaction flush logs (#6616)
Summary:
The raw key bytes are currently dumped directly into the log messages,
which is not ideal if the keys aren't ASCII strings. Null bytes in
particular can cut off bits of the message early.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6616

Reviewed By: ajkr

Differential Revision: D20879218

Pulled By: anand1976

fbshipit-source-id: 825a20715fe6d8012c0163c6e7b8159f7926a1a7
2020-04-06 17:41:45 -07:00
sdong
80979f81c7 Make options.bottommost_compression, compression_opts and bottommost_compression_opts dynamically changeable. (#6615)
Summary:
These three options should be made dynamically changeable. Simply add them to MutableCFOptions and made the change.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6615

Test Plan: Add a unit test to make sure that SetOptions() can change the options.

Reviewed By: riversand963

Differential Revision: D20755951

fbshipit-source-id: 8165f4fd7a7a665cc7fb049698935022a5d2e7ff
2020-03-31 12:11:42 -07:00
Cheng Chang
ee50b8d499 Be able to decrease background thread's CPU priority when creating database backup (#6602)
Summary:
When creating a database backup, the background threads will not only consume IO resources by copying files, but also consuming CPU such as by computing checksums. During peak times, the CPU consumption by the background threads might affect online queries.

This PR makes it possible to decrease CPU priority of these threads when creating a new backup.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6602

Test Plan: make check

Reviewed By: siying, zhichao-cao

Differential Revision: D20683216

Pulled By: cheng-chang

fbshipit-source-id: 9978b9ed9488e8ce135e90ca083e5b4b7221fd84
2020-03-28 19:07:25 -07:00
Zhichao Cao
4246888101 Pass IOStatus to write path and set retryable IO Error as hard error in BG jobs (#6487)
Summary:
In the current code base, we use Status to get and store the returned status from the call. Specifically, for IO related functions, the current Status cannot reflect the IO Error details such as error scope, error retryable attribute, and others. With the implementation of https://github.com/facebook/rocksdb/issues/5761, we have the new Wrapper for IO, which returns IOStatus instead of Status. However, the IOStatus is purged at the lower level of write path and transferred to Status.

The first job of this PR is to pass the IOStatus to the write path (flush, WAL write, and Compaction). The second job is to identify the Retryable IO Error as HardError, and set the bg_error_ as HardError. In this case, the DB Instance becomes read only. User is informed of the Status and need to take actions to deal with it (e.g., call db->Resume()).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6487

Test Plan: Added the testing case to error_handler_fs_test. Pass make asan_check

Reviewed By: anand1976

Differential Revision: D20685017

Pulled By: zhichao-cao

fbshipit-source-id: ff85f042896243abcd6ef37877834e26f36b6eb0
2020-03-27 16:04:43 -07:00
sdong
6fd0ed4993 CompactRange() to use bottom pool when goes to bottommost level (#6593)
Summary:
In automatic compaction, if a compaction is bottommost, it goes to bottom thread pool. We should do the same for manual compaction too.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6593

Test Plan: Add a unit test. See all existing tests pass.

Reviewed By: ajkr

Differential Revision: D20637408

fbshipit-source-id: cb03031e8f895085f7acf6d2d65e69e84c9ddef3
2020-03-24 20:24:32 -07:00
Huisheng Liu
a6ce5c823b multiget support for timestamps (#6483)
Summary:
Add timestamp support for MultiGet().
timestamp from readoptions is honored, and timestamps can be returned along with values.

MultiReadRandom perf test (10 minutes) on the same development machine ram drive with the same DB data shows no regression (within marge of error). The test is adapted from https://github.com/facebook/rocksdb/wiki/RocksDB-In-Memory-Workload-Performance-Benchmarks.
base line (commit 17bef7d3a):
  multireadrandom :     104.173 micros/op 307167 ops/sec; (5462999 of 5462999 found)
This PR:
  multireadrandom :     104.199 micros/op 307095 ops/sec; (5307999 of 5307999 found)

.\db_bench --db=r:\rocksdb.github --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --cache_size=2147483648 --cache_numshardbits=6 --compression_type=none --compression_ratio=1 --min_level_to_compress=-1 --disable_seek_compaction=1 --hard_rate_limit=2 --write_buffer_size=134217728 --max_write_buffer_number=2 --level0_file_num_compaction_trigger=8 --target_file_size_base=134217728 --max_bytes_for_level_base=1073741824 --disable_wal=0 --wal_dir=r:\rocksdb.github\WAL_LOG --sync=0 --verify_checksum=1 --statistics=0 --stats_per_interval=0 --stats_interval=1048576 --histogram=0 --use_plain_table=1 --open_files=-1 --memtablerep=prefix_hash --bloom_bits=10 --bloom_locality=1 --duration=600 --benchmarks=multireadrandom --use_existing_db=1 --num=25000000 --threads=32 --allow_concurrent_memtable_write=0
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6483

Reviewed By: anand1976

Differential Revision: D20498373

Pulled By: riversand963

fbshipit-source-id: 8505f22bc40fd791bc7dd05e48d7e67c91edb627
2020-03-24 11:24:09 -07:00
anand76
a9d168cfd7 Simplify migration to FileSystem API (#6552)
Summary:
The current Env/FileSystem API separation has a couple of issues -
1. It requires the user to specify 2 options - ```Options::env``` and ```Options::file_system``` - which means they have to make code changes to benefit from the new APIs. Furthermore, there is a risk of accessing the same APIs in two different ways, through Env in the old way and through FileSystem in the new way. The two may not always match, for example, if env is ```PosixEnv``` and FileSystem is a custom implementation. Any stray RocksDB calls to env will use the ```PosixEnv``` implementation rather than the file_system implementation.
2. There needs to be a simple way for the FileSystem developer to instantiate an Env for backward compatibility purposes.

This PR solves the above issues and simplifies the migration in the following ways -
1. Embed a shared_ptr to the ```FileSystem``` in the ```Env```, and remove ```Options::file_system``` as a configurable option. This way, no code changes will be required in application code to benefit from the new API. The default Env constructor uses a ```LegacyFileSystemWrapper``` as the embedded ```FileSystem```.
1a. - This also makes it more robust by ensuring that even if RocksDB
  has some stray calls to Env APIs rather than FileSystem, they will go
  through the same object and thus there is no risk of getting out of
  sync.
2. Provide a ```NewCompositeEnv()``` API that can be used to construct a
PosixEnv with a custom FileSystem implementation. This eliminates an
indirection to call Env APIs, and relieves the FileSystem developer of
the burden of having to implement wrappers for the Env APIs.
3. Add a couple of missing FileSystem APIs - ```SanitizeEnvOptions()``` and
```NewLogger()```

Tests:
1. New unit tests
2. make check and make asan_check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6552

Reviewed By: riversand963

Differential Revision: D20592038

Pulled By: anand1976

fbshipit-source-id: c3801ad4153f96d21d5a3ae26c92ba454d1bf1f7
2020-03-23 21:54:21 -07:00
Yanqin Jin
fb09ef05dc Attempt to recover from db with missing table files (#6334)
Summary:
There are situations when RocksDB tries to recover, but the db is in an inconsistent state due to SST files referenced in the MANIFEST being missing. In this case, previous RocksDB will just fail the recovery and return a non-ok status.
This PR enables another possibility. During recovery, RocksDB checks possible MANIFEST files, and try to recover to the most recent state without missing table file. `VersionSet::Recover()` applies version edits incrementally and "materializes" a version only when this version does not reference any missing table file. After processing the entire MANIFEST, the version created last will be the latest version.
`DBImpl::Recover()` calls `VersionSet::Recover()`. Afterwards, WAL replay will *not* be performed.
To use this capability, set `options.best_efforts_recovery = true` when opening the db. Best-efforts recovery is currently incompatible with atomic flush.

Test plan (on devserver):
```
$make check
$COMPILE_WITH_ASAN=1 make all && make check
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6334

Reviewed By: anand1976

Differential Revision: D19778960

Pulled By: riversand963

fbshipit-source-id: c27ea80f29bc952e7d3311ecf5ee9c54393b40a8
2020-03-20 19:30:48 -07:00
Cheng Chang
2d9efc9ab2 Cache result of GetLogicalBufferSize in Linux (#6457)
Summary:
In Linux, when reopening DB with many SST files, profiling shows that 100% system cpu time spent for a couple of seconds for `GetLogicalBufferSize`. This slows down MyRocks' recovery time when site is down.

This PR introduces two new APIs:
1. `Env::RegisterDbPaths` and `Env::UnregisterDbPaths` lets `DB` tell the env when it starts or stops using its database directories . The `PosixFileSystem` takes this opportunity to set up a cache from database directories to the corresponding logical block sizes.
2. `LogicalBlockSizeCache` is defined only for OS_LINUX to cache the logical block sizes.

Other modifications:
1. rename `logical buffer size` to `logical block size` to be consistent with Linux terms.
2. declare `GetLogicalBlockSize` in `PosixHelper` to expose it to `PosixFileSystem`.
3. change the functions `IOError` and `IOStatus` in `env/io_posix.h` to have external linkage since they are used in other translation units too.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6457

Test Plan:
1. A new unit test is added for `LogicalBlockSizeCache` in `env/io_posix_test.cc`.
2. A new integration test is added for `DB` operations related to the cache in `db/db_logical_block_size_cache_test.cc`.

`make check`

Differential Revision: D20131243

Pulled By: cheng-chang

fbshipit-source-id: 3077c50f8065c0bffb544d8f49fb10bba9408d04
2020-03-11 18:40:05 -07:00
Cheng Chang
afb97094ae Skip high levels with no key falling in the range in CompactRange (#6482)
Summary:
In CompactRange, if there is no key in memtable falling in the specified range, then flush is skipped.
This PR extends this skipping logic to SST file levels: it starts compaction from the highest level (starting from L0) that has files with key falling in the specified range, instead of always starts from L0.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6482

Test Plan:
A new test ManualCompactionTest::SkipLevel is added.

Also updated a test related to statistics of index block cache hit in db_test2, the index cache hit is increased by 1 in this PR because when checking overlap for the key range in L0, OverlapWithLevelIterator will do a seek in the table cache iterator, which will read from the cached index.

Also updated db_compaction_test and db_test to use correct range for full compaction.

Differential Revision: D20251149

Pulled By: cheng-chang

fbshipit-source-id: f822157cf4796972bd5035d9d7178d8dfb7af08b
2020-03-04 20:15:25 -08:00
Kefu Chai
03dbd11ead s/const auto/const auto&/ when doing loop (#6477)
Summary:
this silences following warning from clang-11
```
rocksdb/db/db_impl/db_impl_compaction_flush.cc:1040:21: warning: loop variable 'newf' of type 'const std::pair<int, rocksdb::FileMetaData>' creates a copy from type 'const
std::pair<int\
, rocksdb::FileMetaData>' [-Wrange-loop-analysis]
    for (const auto newf : c->edit()->GetNewFiles()) {
                    ^
rocksdb/db/db_impl/db_impl_compaction_flush.cc:1040:10: note: use reference type 'const std::pair<int, rocksdb::FileMetaData> &' to prevent copying
    for (const auto newf : c->edit()->GetNewFiles()) {
         ^~~~~~~~~~~~~~~~~
                    &
```
Signed-off-by: Kefu Chai <tchaikov@gmail.com>
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6477

Differential Revision: D20211850

Pulled By: ltamasi

fbshipit-source-id: 3e89e13a12bba79f1b934d46b7c4c0576cdafb01
2020-03-03 08:41:57 -08:00
sdong
17bef7d3a8 Fix data race of GetCreationTimeOfOldestFile() (#6473)
Summary:
When DBImpl::GetCreationTimeOfOldestFile() calls Version::GetCreationTimeOfOldestFile(), the version is not directly or indirectly referenced, so an event like compaction can race with the operation and cause DBImpl::GetCreationTimeOfOldestFile() to access delocated data. This was caught by an ASAN run:

==268==ERROR: AddressSanitizer: heap-use-after-free on address 0x612000b7d198 at pc 0x000018332913 bp 0x7f391510d310 sp 0x7f391510d308
READ of size 8 at 0x612000b7d198 thread T845 (store_load-33)
SCARINESS: 51 (8-byte-read-heap-use-after-free)
    #0 0x18332912 in rocksdb::Version::GetCreationTimeOfOldestFile(unsigned long*) rocksdb/src/db/version_set.cc:1488
    https://github.com/facebook/rocksdb/issues/1 0x1803ddaa in rocksdb::DBImpl::GetCreationTimeOfOldestFile(unsigned long*) rocksdb/src/db/db_impl/db_impl.cc:4499
    https://github.com/facebook/rocksdb/issues/2 0xe24ca09 in rocksdb::StackableDB::GetCreationTimeOfOldestFile(unsigned long*) rocksdb/utilities/stackable_db.h:392
    ......
0x612000b7d198 is located 216 bytes inside of 296-byte region [0x612000b7d0c0,0x612000b7d1e8)
freed by thread T28 here:
    ......
    https://github.com/facebook/rocksdb/issues/5 0x1832c73f in std::vector<rocksdb::FileMetaData*, std::allocator<rocksdb::FileMetaData*> >::~vector() third-party-buck/platform007/build/libgcc/include/c++/trunk/bits/stl_vector.h:435
    https://github.com/facebook/rocksdb/issues/6 0x1832c73f in rocksdb::VersionStorageInfo::~VersionStorageInfo() rocksdb/src/db/version_set.cc:734
    https://github.com/facebook/rocksdb/issues/7 0x1832cf42 in rocksdb::Version::~Version() rocksdb/src/db/version_set.cc:758
    https://github.com/facebook/rocksdb/issues/8 0x9d1bb5 in rocksdb::Version::Unref() rocksdb/src/db/version_set.cc:2869
    https://github.com/facebook/rocksdb/issues/9 0x183e7631 in rocksdb::Compaction::~Compaction() rocksdb/src/db/compaction/compaction.cc:275
    https://github.com/facebook/rocksdb/issues/10 0x9e6de6 in std::default_delete<rocksdb::Compaction>::operator()(rocksdb::Compaction*) const third-party-buck/platform007/build/libgcc/include/c++/trunk/bits/unique_ptr.h:78
    https://github.com/facebook/rocksdb/issues/11 0x9e6de6 in std::unique_ptr<rocksdb::Compaction, std::default_delete<rocksdb::Compaction> >::reset(rocksdb::Compaction*) third-party-buck/platform007/build/libgcc/include/c++/trunk/bits/unique_ptr.h:376
    https://github.com/facebook/rocksdb/issues/12 0x9e6de6 in rocksdb::DBImpl::BackgroundCompaction(bool*, rocksdb::JobContext*, rocksdb::LogBuffer*, rocksdb::DBImpl::PrepickedCompaction*, rocksdb::Env::Priority) rocksdb/src/db/db_impl/db_impl_compaction_flush.cc:2826
    https://github.com/facebook/rocksdb/issues/13 0x9ac3b8 in rocksdb::DBImpl::BackgroundCallCompaction(rocksdb::DBImpl::PrepickedCompaction*, rocksdb::Env::Priority) rocksdb/src/db/db_impl/db_impl_compaction_flush.cc:2320
    https://github.com/facebook/rocksdb/issues/14 0x9abff7 in rocksdb::DBImpl::BGWorkCompaction(void*) rocksdb/src/db/db_impl/db_impl_compaction_flush.cc:2096
    ......

Fix the issue by reference the super version and use the referenced version from it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6473

Test Plan: Run ASAN for all existing tests.

Differential Revision: D20196416

fbshipit-source-id: 5f4a7918110fc7b8dd7841932d376bc9d1e59d6f
2020-03-02 16:37:01 -08:00
Zhichao Cao
8d73137ae8 Replace Directory with FSDirectory in DB (#6468)
Summary:
In the current code base, we can use Directory from Env to manage directory (e.g, Fsync()). The PR https://github.com/facebook/rocksdb/issues/5761  introduce the File System as a new Env API. So we further replace the Directory class in DB with FSDirectory such that we can have more IO information from IOStatus returned by FSDirectory.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6468

Test Plan: pass make asan_check

Differential Revision: D20195261

Pulled By: zhichao-cao

fbshipit-source-id: 93962cb9436852bfcfb76e086d9e7babd461cbe1
2020-03-02 16:16:26 -08:00
Huisheng Liu
904a60ff63 return timestamp from get (#6409)
Summary:
Added new Get() methods that return timestamp. Dummy implementation is given so that classes derived from DB don't need to be touched to provide their implementation. MultiGet is not included.

ReadRandom perf test (10 minutes) on the same development machine ram drive with the same DB data shows no regression (within marge of error). The test is adapted from https://github.com/facebook/rocksdb/wiki/RocksDB-In-Memory-Workload-Performance-Benchmarks.
    base line (commit 72ee067b9):
        101.712 micros/op 314602 ops/sec;   36.0 MB/s (5658999 of 5658999 found)
    This PR:
        100.288 micros/op 319071 ops/sec;   36.5 MB/s (5674999 of 5674999 found)

./db_bench --db=r:\rocksdb.github --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --cache_size=2147483648 --cache_numshardbits=6 --compression_type=none --compression_ratio=1 --min_level_to_compress=-1 --disable_seek_compaction=1 --hard_rate_limit=2 --write_buffer_size=134217728 --max_write_buffer_number=2 --level0_file_num_compaction_trigger=8 --target_file_size_base=134217728 --max_bytes_for_level_base=1073741824 --disable_wal=0 --wal_dir=r:\rocksdb.github\WAL_LOG --sync=0 --verify_checksum=1 --delete_obsolete_files_period_micros=314572800 --max_background_compactions=4 --max_background_flushes=0 --level0_slowdown_writes_trigger=16 --level0_stop_writes_trigger=24 --statistics=0 --stats_per_interval=0 --stats_interval=1048576 --histogram=0 --use_plain_table=1 --open_files=-1 --mmap_read=1 --mmap_write=0 --memtablerep=prefix_hash --bloom_bits=10 --bloom_locality=1 --duration=600 --benchmarks=readrandom --use_existing_db=1 --num=25000000 --threads=32
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6409

Differential Revision: D20200086

Pulled By: riversand963

fbshipit-source-id: 490edd74d924f62bd8ae9c29c2a6bbbb8410ca50
2020-03-02 16:01:00 -08:00
Michael R. Crusoe
051696bf98 fix some spelling typos (#6464)
Summary:
Found from Debian's "Lintian" program
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6464

Differential Revision: D20162862

Pulled By: zhichao-cao

fbshipit-source-id: 06941ee2437b038b2b8045becbe9d2c6fbff3e12
2020-02-28 14:14:03 -08:00
Yanqin Jin
890d87fadc Some minor fix-ups (#6440)
Summary:
Cleanup some code without any real change in functionality.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6440

Differential Revision: D20015891

Pulled By: riversand963

fbshipit-source-id: 33e18754b0f002006a6d4805e9aaf84c0c8ad25a
2020-02-21 15:09:56 -08:00
sdong
fdf882ded2 Replace namespace name "rocksdb" with ROCKSDB_NAMESPACE (#6433)
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433

Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.

Differential Revision: D19977691

fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
2020-02-20 12:09:57 -08:00
Andrew Kryczka
c6abe30ee3 Fix concurrent full purge and WAL recycling (#5900)
Summary:
We were removing the file from `log_recycle_files_` before renaming it
with `ReuseWritableFile()`. Since `ReuseWritableFile()` occurs outside
the DB mutex, it was possible for a concurrent full purge to sneak in
and delete the file before it could be renamed. Consequently, `SwitchMemtable()`
would fail and the DB would enter read-only mode.

The fix is to hold the old file number in `log_recycle_files_` until
after the file has been renamed. Full purge uses that list to decide
which files to keep, so it can no longer delete a file pending recycling.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5900

Test Plan: new unit test

Differential Revision: D19771719

Pulled By: ajkr

fbshipit-source-id: 094346349ca3fb499712e62de03905acc30b5ce8
2020-02-18 13:54:13 -08:00
sdong
ac8e89a443 Should flush and sync WAL when writing it in DB::Open() (#6417)
Summary:
A recent fix related to 2pc https://github.com/facebook/rocksdb/pull/6313/ writes something to WAL, but does not flush or sync. This causes assertion failure "impl->TEST_WALBufferIsEmpty()" if manual_wal_flush = true. We should fsync the entry to make sure a second power reset can recover.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6417

Test Plan: Add manual_wal_flush=true case in TransactionTest.DoubleCrashInRecovery and fix a bug in the test so that the bug can be reproduced. It passes with the fix.

Differential Revision: D19894537

fbshipit-source-id: f1e84e49e2269f583c6019743118292cd8b6598e
2020-02-13 18:41:04 -08:00
Huisheng Liu
5138764eb5 Fix destroydb (#6308)
Summary:
It's observed on Windows DestroyDB failed to remove the log file because the logger is still alive in sst file manager and holding a handle to the log file. This fix makes sure the logger is released before attempt to clear the database directory.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6308

Differential Revision: D19818829

Pulled By: riversand963

fbshipit-source-id: 54c3e6859aadaaba4a49b3e851b73dc35ec7dc6a
2020-02-13 11:21:27 -08:00
Zhichao Cao
4369f2c7bb Checksum for each SST file and stores in MANIFEST (#6216)
Summary:
In the current code base, RocksDB generate the checksum for each block and verify the checksum at usage. Current PR enable SST file checksum. After a SST file is generated by Flush or Compaction, RocksDB generate the SST file checksum and store the checksum value and checksum method name in the vs_info and MANIFEST as part for the FileMetadata.

Added the enable_sst_file_checksum to Options to enable or disable file checksum. Added sst_file_checksum to Options such that user can plugin their own SST file checksum calculate method via overriding the SstFileChecksum class. The checksum information inlcuding uint32_t checksum value and a checksum name (string).  A new tool is added to LDB such that user can dump out a list of file checksum information from MANIFEST. If user enables the file checksum but does not provide the sst_file_checksum instance, RocksDB will use the default crc32checksum implemented in table/sst_file_checksum_crc32c.h
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6216

Test Plan: Added the testing case in table_test and ldb_cmd_test to verify checksum is correct in different level. Pass make asan_check.

Differential Revision: D19171461

Pulled By: zhichao-cao

fbshipit-source-id: b2e53479eefc5bb0437189eaa1941670e5ba8b87
2020-02-10 15:52:52 -08:00
Yutian Li
2e0159ec9e Add error status for no_slowdown & low priority write (#6396)
Summary:
When `no_slowdown` is enabled, it returns `Status::Incomplete("Write stall")` if a stall would occur. This patch adds descriptive text for when `no_slowdown` and `low_pri` are enabled.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6396

Differential Revision: D19808978

Pulled By: cheng-chang

fbshipit-source-id: a53b0d25ed414c821a086531e0222027f925e627
2020-02-10 12:33:16 -08:00
Levi Tamasi
752c87af78 Clean up VersionEdit a bit (#6383)
Summary:
This is a bunch of small improvements to `VersionEdit`. Namely, the patch

* Makes the names and order of variables, methods, and code chunks related
  to the various information elements more consistent, and adds missing
  getters for the sake of completeness.
* Initializes previously uninitialized stack variables.
* Marks all getters const to improve const correctness.
* Adds in-class initializers and removes the default ctor that would
  create an object with uninitialized built-in fields and call `Clear`
  afterwards.
* Adds a new type alias for new files and changes the existing `typedef`
  for deleted files into a type alias as well.
* Makes the helper method `DecodeNewFile4From` private.
* Switches from long-winded iterator syntax to range based loops in a
  couple of places.
* Fixes a couple of assignments where an integer 0 was assigned to
  boolean members.
* Fixes a getter which used to return a `const std::string` instead of
the intended `const std::string&`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6383

Test Plan: make check

Differential Revision: D19780537

Pulled By: ltamasi

fbshipit-source-id: b0b4f09fee0ec0e7c7b7a6d76bfe5346e91824d0
2020-02-07 13:27:06 -08:00
Cheng Chang
5f478b9f75 Remove outdated comment (#6379)
Summary:
Since the logic for handling IDENTITY file is now inside `NewDB`, the comment above `NewDB` is no longer relevant.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6379

Test Plan: not needed

Differential Revision: D19795440

Pulled By: cheng-chang

fbshipit-source-id: 0b1cca87ac6d92474701c46aa4c8d4d708bfa19b
2020-02-07 13:18:43 -08:00
Cheng Chang
0a74e1b958 Add status checks during DB::Open (#6380)
Summary:
Several statuses were not checked during DB::Open.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6380

Test Plan: make check

Differential Revision: D19780237

Pulled By: cheng-chang

fbshipit-source-id: c8d189d20344bd1607890dd1449345bda2ef96b9
2020-02-07 12:32:09 -08:00
Yanqin Jin
f361cedf06 Atomic flush rollback once on failure (#6385)
Summary:
Before this fix, atomic flush codepath may hit an assertion failure on a specific failure case.
If all flush jobs within an atomic flush succeed (they do not write to MANIFEST), but batch writing version edits to MANIFEST fails, then `cfd->imm()->RollbackMemTableFlush()` will be called twice, and the second invocation hits assertion failure `assert(m->flush_in_progress_)` since the first invocation resets the variable `flush_in_progress_` to false already.

Test plan (dev server):
```
./db_flush_test --gtest_filter=DBAtomicFlushTest/DBAtomicFlushTest.RollbackAfterFailToInstallResults
make check
```
Both must succeed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6385

Differential Revision: D19782943

Pulled By: riversand963

fbshipit-source-id: 84e1592625e729d1b70fdc8479959387a74cb121
2020-02-07 10:52:10 -08:00
Mike Kolupaev
1ed7d9b1b5 Avoid lots of calls to Env::GetFileSize() in SstFileManagerImpl when opening DB (#6363)
Summary:
Before this PR it calls GetFileSize() once for each sst file in the DB. This can take a long time if there are be tens of thousands of sst files (e.g. in thousands of column families), and even longer if Env is talking to some remote service rather than local filesystem. This PR makes DB::Open() use sst file sizes that are already known from manifest (typically almost all files in the DB) and only call GetFileSize() for non-sst or obsolete files. Note that GetFileSize() is also called and checked against manifest in CheckConsistency(), so the calls in SstFileManagerImpl were completely redundant.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6363

Test Plan: deployed to a test cluster, looked at a dump of Env calls (from a custom instrumented Env) - no more thousands of GetFileSize()s.

Differential Revision: D19702509

Pulled By: al13n321

fbshipit-source-id: 99f8110620cb2e9d0c092dfcdbb11f3af4ff8b73
2020-02-04 13:41:53 -08:00
Mike Kolupaev
637e64b9ac Add an option to prevent DB::Open() from querying sizes of all sst files (#6353)
Summary:
When paranoid_checks is on, DBImpl::CheckConsistency() iterates over all sst files and calls Env::GetFileSize() for each of them. As far as I could understand, this is pretty arbitrary and doesn't affect correctness - if filesystem doesn't corrupt fsynced files, the file sizes will always match; if it does, it may as well corrupt contents as well as sizes, and rocksdb doesn't check contents on open.

If there are thousands of sst files, getting all their sizes takes a while. If, on top of that, Env is overridden to use some remote storage instead of local filesystem, it can be *really* slow and overload the remote storage service. This PR adds an option to not do GetFileSize(); instead it does GetChildren() for parent directory to check that all the expected sst files are at least present, but doesn't check their sizes.

We can't just disable paranoid_checks instead because paranoid_checks do a few other important things: make the DB read-only on write errors, print error messages on read errors, etc.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6353

Test Plan: ran the added sanity check unit test. Will try it out in a LogDevice test cluster where the GetFileSize() calls are causing a lot of trouble.

Differential Revision: D19656425

Pulled By: al13n321

fbshipit-source-id: c2c421b367633033760d1f56747bad206d1fbf82
2020-02-04 01:27:26 -08:00
sdong
f195d8d523 Use ReadFileToString() to get content from IDENTITY file (#6365)
Summary:
Right now when reading IDENTITY file, we use a very similar logic as ReadFileToString() while it does an extra file size check, which may be expensive in some file systems. There is no reason to duplicate the logic. Use ReadFileToString() instead.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6365

Test Plan: RUn all existing tests.

Differential Revision: D19709399

fbshipit-source-id: 3bac31f3b2471f98a0d2694278b41e9cd34040fe
2020-02-03 17:40:49 -08:00
sdong
36c504be17 Avoid create directory for every column families (#6358)
Summary:
A relatively recent regression causes for every CF, create and open directory is called for the DB directory, unless CF has a private directory. This doesn't scale well with large number of column families.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6358

Test Plan: Run all existing tests and see it pass. strace with db_bench --num_column_families and observe it doesn't open directory for number of column families.

Differential Revision: D19675141

fbshipit-source-id: da01d9216f1dae3f03d4064fbd88ce71245bd9be
2020-02-03 14:13:39 -08:00
Maysam Yabandeh
3316d29221 Disable recycle_log_file_num when it is incompatible with recovery mode (#6351)
Summary:
Non-zero recycle_log_file_num is incompatible with kPointInTimeRecovery and kAbsoluteConsistency recovery modes. Currently SanitizeOptions changes the recovery mode to kTolerateCorruptedTailRecords, while to resolve this option conflict it makes more sense to compromise recycle_log_file_num, which is a performance feature, instead of wal_recovery_mode, which is a safety feature.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6351

Differential Revision: D19648931

Pulled By: maysamyabandeh

fbshipit-source-id: dd0bf78349edc007518a00c4d63931fd69294ad7
2020-01-31 07:28:30 -08:00
Maysam Yabandeh
2f973ca96e Double Crash in kPointInTimeRecovery with TransactionDB (#6313)
Summary:
In WritePrepared there could be gap in sequence numbers. This breaks the trick we use in kPointInTimeRecovery which assume the first seq in the log right after the corrupted log is one larger than the last seq we read from the logs. To let this trick keep working, we add a dummy entry with the expected sequence to the first log right after recovery.
Also in WriteCommitted, if the log right after the corrupted log is empty, since it has no sequence number to let the sequential trick work, it is assumed as unexpected behavior. This is however expected to happen if we close the db after recovering from a corruption and before writing anything new to it. To remedy that, we apply the same technique by writing a dummy entry to the log that is created after the corrupted log.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6313

Differential Revision: D19458291

Pulled By: maysamyabandeh

fbshipit-source-id: 09bc49e574690085df45b034ca863ff315937e2d
2020-01-29 11:40:55 -08:00
Andrew Kryczka
5b33cfa1e3 fix WriteBufferManager flush log message (#6335)
Summary:
It chooses the oldest memtable, not the largest one. This is an
important difference for users whose CFs receive non-uniform write
rates.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6335

Differential Revision: D19588865

Pulled By: maysamyabandeh

fbshipit-source-id: 62ad4325b0182f5f27858584cd73fd5978fb2cec
2020-01-27 15:49:22 -08:00
Levi Tamasi
73f65b457e Adjust thread pool sizes when setting max_background_jobs dynamically (#6300)
Summary:
https://github.com/facebook/rocksdb/pull/2205 introduced a new
configuration option called `max_background_jobs`, superseding the
earlier options `max_background_flushes` and
`max_background_compactions`. However, unlike
`max_background_compactions`, setting `max_background_jobs` dynamically
through the `SetDBOptions` interface does not adjust the size of the
thread pools (see https://github.com/facebook/rocksdb/issues/6298). The
patch fixes this.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6300

Test Plan: Extended unit test.

Differential Revision: D19430899

Pulled By: ltamasi

fbshipit-source-id: 704006605b3c13c3d1b997ccc0831ee369721074
2020-01-16 14:35:10 -08:00
Yanqin Jin
bce5189f4d Fix error message (#6264)
Summary:
Fix an error message when CURRENT is not found.

Test plan (dev server)
```
make check
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6264

Differential Revision: D19300699

Pulled By: riversand963

fbshipit-source-id: 303fa206386a125960ecca1dbdeff07422690caf
2020-01-07 12:32:20 -08:00
Mike Kolupaev
ce63eda6f0 Fix use-after-free and double-deleting files in BackgroundCallPurge() (#6193)
Summary:
The bad code was:

```
mutex.Lock(); // `mutex` protects `container`
for (auto& x : container) {
  mutex.Unlock();
  // do stuff to x
  mutex.Lock();
}
```

It's incorrect because both `x` and the iterator may become invalid if another thread modifies the container while this thread is not holding the mutex.

Broken by https://github.com/facebook/rocksdb/pull/5796 - it replaced a `while (!container.empty())` loop with a `for (auto x : container)`.

(RocksDB code does a lot of such unlocking+re-locking of mutexes, and this type of bugs comes up a lot :/ )
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6193

Test Plan: Ran some logdevice integration tests that were crashing without this fix.

Differential Revision: D19116874

Pulled By: al13n321

fbshipit-source-id: 9672bc4227c1b68f46f7436db2b96811adb8c703
2019-12-17 20:08:56 -08:00
解轶伦
39fcaf8246 delete superversions in BackgroundCallPurge (#6146)
Summary:
I found that CleanupSuperVersion() may block Get() for 30ms+ (per MemTable is 256MB).

Then I found "delete sv" in ~SuperVersion() takes the time.

The backtrace looks like this

DBImpl::GetImpl() -> DBImpl::ReturnAndCleanupSuperVersion() ->
DBImpl::CleanupSuperVersion() : delete sv; -> ~SuperVersion()

I think it's better to delete in a background thread,  please review it。
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6146

Differential Revision: D18972066

fbshipit-source-id: 0f7b0b70b9bb1e27ad6fc1c8a408fbbf237ae08c
2019-12-17 13:22:57 -08:00
anand76
afa2420c2b Introduce a new storage specific Env API (#5761)
Summary:
The current Env API encompasses both storage/file operations, as well as OS related operations. Most of the APIs return a Status, which does not have enough metadata about an error, such as whether its retry-able or not, scope (i.e fault domain) of the error etc., that may be required in order to properly handle a storage error. The file APIs also do not provide enough control over the IO SLA, such as timeout, prioritization, hinting about placement and redundancy etc.

This PR separates out the file/storage APIs from Env into a new FileSystem class. The APIs are updated to return an IOStatus with metadata about the error, as well as to take an IOOptions structure as input in order to allow more control over the IO.

The user can set both ```options.env``` and ```options.file_system``` to specify that RocksDB should use the former for OS related operations and the latter for storage operations. Internally, a ```CompositeEnvWrapper``` has been introduced that inherits from ```Env``` and redirects individual methods to either an ```Env``` implementation or the ```FileSystem``` as appropriate. When options are sanitized during ```DB::Open```, ```options.env``` is replaced with a newly allocated ```CompositeEnvWrapper``` instance if both env and file_system have been specified. This way, the rest of the RocksDB code can continue to function as before.

This PR also ports PosixEnv to the new API by splitting it into two - PosixEnv and PosixFileSystem. PosixEnv is defined as a sub-class of CompositeEnvWrapper, and threading/time functions are overridden with Posix specific implementations in order to avoid an extra level of indirection.

The ```CompositeEnvWrapper``` translates ```IOStatus``` return code to ```Status```, and sets the severity to ```kSoftError``` if the io_status is retryable. The error handling code in RocksDB can then recover the DB automatically.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5761

Differential Revision: D18868376

Pulled By: anand1976

fbshipit-source-id: 39efe18a162ea746fabac6360ff529baba48486f
2019-12-13 14:48:41 -08:00
Levi Tamasi
6d54eb3dc2 Do not create/install new SuperVersion if nothing was deleted during memtable trim (#6169)
Summary:
We have observed an increase in CPU load caused by frequent calls to
`ColumnFamilyData::InstallSuperVersion` from `DBImpl::TrimMemtableHistory`
when using `max_write_buffer_size_to_maintain` to limit the amount of
memtable history maintained for transaction conflict checking. As it turns out,
this is caused by the code creating and installing a new `SuperVersion` even if
no memtables were actually trimmed. The patch adds a check to avoid this.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6169

Test Plan:
Compared `perf` output for

```
./db_bench -benchmarks=randomtransaction -optimistic_transaction_db=1 -statistics -stats_interval_seconds=1 -duration=90 -num=500000 --max_write_buffer_size_to_maintain=16000000 --transaction_set_snapshot=1 --threads=32
```

before and after the change. With the fix, the call chain `rocksdb::DBImpl::TrimMemtableHistory` ->
`rocksdb::ColumnFamilyData::InstallSuperVersion` -> `rocksdb::ThreadLocalPtr::StaticMeta::Scrape`
no longer registers in the `perf` report.

Differential Revision: D19031509

Pulled By: ltamasi

fbshipit-source-id: 02686fce594e5b50eba0710e4b28a9b808c8aa20
2019-12-13 13:29:29 -08:00
Jermy Li
c2029f9716 Support concurrent CF iteration and drop (#6147)
Summary:
It's easy to cause coredump when closing ColumnFamilyHandle with unreleased iterators, especially iterators release is controlled by java GC when using JNI.

This patch fixed concurrent CF iteration and drop, we let iterators(actually SuperVersion) hold a ColumnFamilyData reference to prevent the CF from being released too early.

fixed https://github.com/facebook/rocksdb/issues/5982
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6147

Differential Revision: D18926378

fbshipit-source-id: 1dff6d068c603d012b81446812368bfee95a5e15
2019-12-12 19:04:48 -08:00
Connor
a844591201 wait pending memtable writes on file ingestion or compact range (#6113)
Summary:
**Summary:**
This PR fixes two unordered_write related issues:
- ingestion job may skip the necessary memtable flush https://github.com/facebook/rocksdb/issues/6026
- compact range may cause memtable is flushed before pending unordered write finished
    1. `CompactRange` triggers memtable flush but doesn't wait for pending-writes
    2.  there are some pending writes but memtable is already flushed
    3.  the memtable related WAL is removed( note that the pending-writes were recorded in that WAL).
    4.  pending-writes write to newer created memtable
    5. there is a restart
    6. missing the previous pending-writes because WAL is removed but they aren't included in SST.

**How to solve:**
- Wait pending memtable writes before ingestion job check memtable key range
- Wait pending memtable writes before flush memtable.
**Note that: `CompactRange` calls `RangesOverlapWithMemtables` too without waiting for pending waits, but I'm not sure whether it affects the correctness.**

**Test Plan:**
make check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6113

Differential Revision: D18895674

Pulled By: maysamyabandeh

fbshipit-source-id: da22b4476fc7e06c176020e7cc171eb78189ecaf
2019-12-12 14:08:02 -08:00
Yi Wu
05a86318a7 Remove unused low_pri_write_rate_limiter_ (#6068)
Summary:
`low_pri_write_rate_limiter_` is not being used. Removing. `WriteController` has an internal low_pri rate limiter which is the real rate limiter for low-pri writes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6068

Test Plan: make

Differential Revision: D18664120

fbshipit-source-id: dfe3e4de033cf3522b67781b383aad7d0936034c
2019-12-11 10:28:33 -08:00
sdong
7d79b32618 Break db_stress_tool.cc to a list of source files (#6134)
Summary:
db_stress_tool.cc now is a giant file. In order to main it easier to improve and maintain, break it down to multiple source files.
Most classes are turned into their own files. Separate .h and .cc files are created for gflag definiations. Another .h and .cc files are created for some common functions. Some test execution logic that is only loosely related to class StressTest is moved to db_stress_driver.h and db_stress_driver.cc. All the files are located under db_stress_tool/. The directory name is created as such because if we end it with either stress or test, .gitignore will ignore any file under it and makes it prone to issues in developements.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6134

Test Plan: Build under GCC7 with and without LITE on using GNU Make. Build with GCC 4.8. Build with cmake with -DWITH_TOOL=1

Differential Revision: D18876064

fbshipit-source-id: b25d0a7451840f31ac0f5ebb0068785f783fdf7d
2019-12-08 23:51:01 -08:00
Yanqin Jin
fe1147db1c Let DBSecondary close files after catch up (#6114)
Summary:
After secondary instance replays the logs from primary, certain files become
obsolete. The secondary should find these files, evict their table readers from
table cache and close them. If this is not done, the secondary will hold on to
these files and prevent their space from being freed.

Test plan (devserver):
```
$./db_secondary_test --gtest_filter=DBSecondaryTest.SecondaryCloseFiles
$make check
$./db_stress -ops_per_thread=100000 -enable_secondary=true -threads=32 -secondary_catch_up_one_in=10000 -clear_column_family_one_in=1000 -reopen=100
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6114

Differential Revision: D18769998

Pulled By: riversand963

fbshipit-source-id: 5d1f151567247196164e1b79d8402fa2045b9120
2019-12-02 17:45:03 -08:00
Yanqin Jin
09fcf4fb6b Fix a potential bug scheduling unnecessary threads (#6104)
Summary:
RocksDB should decrement the counter `unscheduled_flushes_` as soon as the bg
thread is scheduled. Before this fix, the counter is decremented only when the
bg thread starts and picks an element from the flush queue. This may cause more
than necessary bg threads to be scheduled. Not a correctness issue, but may
affect flush thread count.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6104

Test Plan:
```
make check
```

Differential Revision: D18735584

Pulled By: riversand963

fbshipit-source-id: d36272d4a08a494aeeab6200a3cff7a3d1a2dc10
2019-11-27 14:48:49 -08:00
sdong
aa1857e2df Support options.max_open_files = -1 with periodic_compaction_seconds (#6090)
Summary:
options.periodic_compaction_seconds isn't supported when options.max_open_files != -1. It's because that the information of file creation time is stored in table properties and are not guaranteed to be loaded unless options.max_open_files = -1. Relax this constraint by storing the information in manifest.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6090

Test Plan: Pass all existing tests; Modify an existing test to force the manifest value to take 0 to simulate backward compatibility case; manually open the DB generated with the change by release 4.2.

Differential Revision: D18702268

fbshipit-source-id: 13e0bd94f546498a04f3dc5fc0d9dff5125ec9eb
2019-11-26 21:39:56 -08:00