Summary:
The file tree structure in Version is prebuilt and the range of each file is known.
On the Get() code path, we do binary search in FindFile() by comparing
target key with each file's largest key and also check the range for each L0 file.
With some pre-calculated knowledge, each key comparision that has been done can serve
as a hint to narrow down further searches:
(1) If a key falls within a L0 file's range, we can safely skip the next
file if its range does not overlap with the current one.
(2) If a key falls within a file's range in level L0 - Ln-1, we should only
need to binary search in the next level for files that overlap with the current one.
(1) will be able to skip some files depending one the key distribution.
(2) can greatly reduce the range of binary search, especially for bottom
levels, given that one file most likely only overlaps with N files from
the level below (where N is max_bytes_for_level_multiplier). So on level
L, we will only look at ~N files instead of N^L files.
Some inital results: measured with 500M key DB, when write is light (10k/s = 1.2M/s), this
improves QPS ~7% on top of blocked bloom. When write is heavier (80k/s =
9.6M/s), it gives us ~13% improvement.
Test Plan: make all check
Reviewers: haobo, igor, dhruba, sdong, yhchiang
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17205
Summary:
D17961 has two bugs:
(1) two level iterator fails to populate FileMetaData.table_reader, causing performance regression.
(2) table cache handle the !status.ok() case in the wrong place, causing seg fault which shouldn't happen.
Test Plan: make all check
Reviewers: ljin, igor, haobo
Reviewed By: ljin
CC: yhchiang, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D17991
Summary:
One of our profilings shows that Version::Get() sometimes is slow when getting pointer of user comparators or other global objects. In this patch:
(1) we keep pointers of immutable objects in Version to avoid accesses them though option objects or cfd objects
(2) table_reader is directly cached in FileMetaData so that table cache don't have to go through handle first to fetch it
(3) If level 0 has less than 3 files, skip the filtering logic based on SST tables' key range. Smallest and largest key are stored in separated memory locations, which has potential cache misses
Test Plan: make all check
Reviewers: haobo, ljin
Reviewed By: haobo
CC: igor, yhchiang, nkg-, leveldb
Differential Revision: https://reviews.facebook.net/D17739
Summary: Current behavior of creating new DB is, if there is existing log files, we will go ahead and replay them on top of empty DB. This is a behavior that no user would expect. With this patch, we will fail the creation if a user creates a DB with existing log files.
Test Plan: make all check
Reviewers: haobo, igor, ljin
Reviewed By: haobo
CC: nkg-, yhchiang, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D17817
Summary:
Introducing RocksDBLite! Removes all the non-essential features and reduces the binary size. This effort should help our adoption on mobile.
Binary size when compiling for IOS (`TARGET_OS=IOS m static_lib`) is down to 9MB from 15MB (without stripping)
Test Plan: compiles :)
Reviewers: dhruba, haobo, ljin, sdong, yhchiang
Reviewed By: yhchiang
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17835
Summary:
With multiple column families, especially when manual Flush is executed, we might roll the log file, although the current log file is empty (no data has been written to the log).
After the diff, we won't create new log file if current is empty.
Next, I will write an algorithm that will flush column families that reference old log files (i.e., that weren't flushed in a while)
Test Plan: Added an unit test. Confirmed that unit test failes in master
Reviewers: dhruba, haobo, ljin, sdong
Reviewed By: ljin
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17631
Summary: multireadrandom is broken. Fix it
Test Plan: run it and see segfault has gone.
Reviewers: ljin
Reviewed By: ljin
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17781
Summary:
Fix the following compile error
./db/tailing_iter.h:17:1: error: class 'SuperVersion' was previously declared as a struct [-Werror,-Wmismatched-tags]
class SuperVersion;
^
./db/column_family.h:77:8: note: previous use is here
struct SuperVersion {
^
./db/tailing_iter.h:17:1: note: did you mean struct here?
class SuperVersion;
^~~~~
struct
1 error generated.
Test Plan: make
Reviewers: ljin, igor, haobo, sdong
Reviewed By: ljin
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17799
Summary:
replace the super version acquisision in tailing itrator with thread
local
Test Plan: will post results
Reviewers: igor, haobo, sdong, yhchiang, dhruba
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17757
Summary:
Similar to GetImp(), use SuperVersion from thread local instead of acquriing mutex.
I don't expect this change will make a dent on NewIterator() performance
because the bottleneck seems to be on the rest part of the API
Test Plan:
make asan_check
will post perf numbers
Reviewers: haobo, igor, sdong, dhruba, yhchiang
Reviewed By: sdong
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17643
Summary: This patch introduces a new parameter num_multi_db in db_bench. When this parameter is larger than 1, multiple DBs will be created. In all benchmarks, any operation applies to a random DB among them. This is to benchmark the performance of similar applications.
Test Plan: run db_bench on both of num_multi_db=0 and more.
Reviewers: haobo, ljin, igor
Reviewed By: igor
CC: igor, yhchiang, dhruba, nkg-, leveldb
Differential Revision: https://reviews.facebook.net/D17769
Summary:
it writes ~10M data, default L0 compaction trigger is 4, plus 2 writer
buffer, so that can accommodate ~6M data before compaction happens for
sure. I guess encoding is doing a good job to shrink the data so that
sometime, compaction does not get triggered. I get test failure quite
often.
Test Plan: ran it multiple times and all got pass
Reviewers: igor, sdong
Reviewed By: sdong
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17775
Summary: as title
Test Plan: ran it
Reviewers: igor, haobo, yhchiang
Reviewed By: yhchiang
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17751
Summary: XCode for some reason injects `#define DEBUG 1` into our code, which makes compile fail because we use `DEBUG` keyword for other stuff. This diff fixes the issue by renaming `DEBUG` to `DEBUG_LEVEL`.
Test Plan: compiles
Reviewers: dhruba, haobo, sdong, yhchiang, ljin
Reviewed By: yhchiang
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17709
Summary: Based on previous patches, this diff eventually provides the end-to-end mechanism for users to specify the hash-index.
Test Plan: Wrote several new unit tests.
Reviewers: sdong, haobo, dhruba
Reviewed By: sdong
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16539
Summary: as title
Test Plan: ran it
Reviewers: igor, haobo, yhchiang
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17655
Summary: Compiling for iOS has by default turned on -Wmissing-prototypes, which causes rocksdb to fail compiling. This diff turns on -Wmissing-prototypes in our compile options and cleans up all functions with missing prototypes.
Test Plan: compiles
Reviewers: dhruba, haobo, ljin, sdong
Reviewed By: ljin
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17649
Summary:
1. Polish IterKey a little bit.
2. Turn to use it in local parameter of current_user_key in DBImpl::ProcessKeyValueCompaction(). Our profile showing that DBImpl::ProcessKeyValueCompaction() has about 14% costs in std::string (the base including reading and writing data but excluding compaction filtering), which is higher than it should be. There are two std::string used in DBImpl::ProcessKeyValueCompaction(), compaction_filter_value and current_user_key and it's hard to distinguish the two.
Test Plan: make all check
Reviewers: haobo, ljin
Reviewed By: haobo
CC: igor, yhchiang, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D17613
Summary:
This is testing behavior that was reported in https://github.com/facebook/rocksdb/issues/111
No issue was found, but it still good to commit this and make CompressedCache more robust.
Test Plan: this is a plan
Reviewers: ljin, dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17625
Summary:
filluniquerandom is painfully slow due to the naive bitmap check to find
out if a key has been seen before. Majority of time is spent on searching
the last few keys. Split a giant BitSet to smaller ones so that we can
quickly check if a BitSet is full and thus can skip quickly.
It used to take over one hour to filluniquerandom for 100M keys, now it
takes about 10 mins.
Test Plan:
unit test
also verified correctness in db_bench and make sure all keys are
generated
Reviewers: igor, haobo, yhchiang
Reviewed By: igor
CC: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D17607
Summary: When opening DB in read-only mode, client can choose to only specify a subset of column families ("default" column family can't be omitted, though)
Test Plan: added a unit test in column_family_test
Reviewers: haobo, sdong, ljin, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17565
Summary:
GetProperty test is flakey.
Before this diff: P8635927
After: P8635945
We need to make sure the thread is done before we destruct sleeping tasks. Otherwise, bad things happen.
Test Plan: See summary
Reviewers: ljin, sdong, haobo, dhruba
Reviewed By: ljin
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17595
Summary:
clean up the db_bench a little bit. also avoid allocating memory for key
in the loop
Test Plan:
I verified a run with filluniquerandom & readrandom. Iterator seek will be used lot
to measure performance. Will fix whatever comes up
Reviewers: haobo, igor, yhchiang
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17559
Summary: ToString() is expensive. Profiling shows that most compaction threads are stuck in jemalloc, allocating a new string. This will help out a litte.
Test Plan: make check
Reviewers: haobo, danguo
Reviewed By: danguo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17583
Summary: This will allow us to disable them completely for iOS or for better performance
Test Plan: will run make all check
Reviewers: igor, haobo, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17511
Summary:
Move PlainTableIterator's copied key from std::string local buffer to avoid paying the extra costs in std::string related to sharing. Reuse the same buffer class in DbIter. Move the class to dbformat.h.
This patch improves iterator performance significantly. Running this benchmark:
./table_reader_bench --num_keys2=17 --iterator --plain_table --time_unit=nanosecond
The average latency is improved to about 750 nanoseconds from 1100 nanoseconds.
Test Plan:
Add a unit test.
make all check
Reviewers: haobo, ljin
Reviewed By: haobo
CC: igor, yhchiang, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D17547
Summary: If a client specifies wal_dir with trailing '/', we will fail in deleting obsolete log files. See task #4083746
Test Plan: make check
Reviewers: haobo, sdong
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17535
Summary: Our measurement shows that sometimes new log::Write's constructor can take hundreds of milliseconds. It's unclear why but just simply move it out of DB mutex.
Test Plan: make all check
Reviewers: haobo, ljin, igor
Reviewed By: haobo
CC: nkg-, yhchiang, leveldb
Differential Revision: https://reviews.facebook.net/D17487
Summary: per sdong's request, this will help processor prefetch on n->key case.
Test Plan: make all check
Reviewers: sdong, haobo, igor
Reviewed By: sdong
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17415
Summary: Flushing log buffer earlier to avoid confusion of time holding the locks.
Test Plan: Should be safe as long as several related db test passes
Reviewers: haobo, igor, ljin
Reviewed By: igor
CC: nkg-, leveldb
Differential Revision: https://reviews.facebook.net/D17493
Summary: Move several some common logging still in DB mutex to log buffer.
Test Plan: make all check
Reviewers: haobo, igor, ljin, nkg-
Reviewed By: nkg-
CC: nkg-, yhchiang, leveldb
Differential Revision: https://reviews.facebook.net/D17439
Summary: This patch fixed a race condition where a log file is moved to archived dir in the middle of GetSortedWalFiles. Without the fix, the log file would be missed in the result, which leads to transaction log iterator gap. A test utility SyncPoint is added to help reproducing the race condition.
Test Plan: TransactionLogIteratorRace; make check
Reviewers: dhruba, ljin
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17121
Summary: As we know, logging can be slow, or even hang for some file systems. Move one more logging out of DB mutex.
Test Plan: make all check
Reviewers: haobo, igor, ljin
Reviewed By: igor
CC: yhchiang, nkg-, leveldb
Differential Revision: https://reviews.facebook.net/D17427
Summary: The previous change D15087 changed existing compaction filter, which makes the commonly used class not backward compatible. Revert the older interface. Use a new interface for V2 instead.
Test Plan: make all check
Reviewers: haobo, yhchiang, igor
CC: danguo, dhruba, ljin, igor, leveldb
Differential Revision: https://reviews.facebook.net/D17223
Summary: It is a regression valgrind bug caused by using FileMetaData as index block handle. One of the fields of FileMetaData is not initialized after being contructed and copied, but I'm not able to find which one. Also, I realized that it's not a good idea to use FileMetaData as in TwoLevelIterator::InitDataBlock(), a copied FileMetaData can be compared with the one in version set byte by byte, but the refs can be changed. Also comparing such a large structure is slightly more expensive. Use a simpler structure instead
Test Plan:
Run the failing valgrind test (Harness.RandomizedLongDB)
make all check
Reviewers: igor, haobo, ljin
Reviewed By: igor
CC: yhchiang, leveldb
Differential Revision: https://reviews.facebook.net/D17409
Summary: DBIter now uses a std::string for saved_key. Based on some profiling, it could be more expensive than we though. Optimize it with the same technique as LookupKey -- if it is short, we copy it to a static allocated char. Otherwise, dynamically allocate memory for it.
Test Plan: make all check
Reviewers: haobo, ljin
Reviewed By: haobo
CC: dhruba, igor, yhchiang, leveldb
Differential Revision: https://reviews.facebook.net/D17289
Summary:
In total order mode, iterator's seek() shouldn't check total order.
Also some cleaning up about checking null for shared pointers. I don't know the behavior before it.
This bug was reported by @igor.
Test Plan: test plain_table_db_test
Reviewers: ljin, haobo, igor
Reviewed By: igor
CC: yhchiang, dhruba, igor, leveldb
Differential Revision: https://reviews.facebook.net/D17391
Summary: Talked to <insert internal project name> folks and they found it really scary that they won't be able to roll back once they upgrade to 2.8. We should fix this.
Test Plan: make check
Reviewers: haobo, ljin
Reviewed By: ljin
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17343
Summary: Fix some more CompactionFilterV2 valgrind issues. Maybe it would make sense for CompactionFilterV2 to delete its prefix_extractor?
Test Plan: ran CompactionFilterV2* tests with valgrind. issues before patch -> no issues after
Reviewers: haobo, sdong, ljin, dhruba
Reviewed By: dhruba
CC: leveldb, danguo
Differential Revision: https://reviews.facebook.net/D17337
Summary: Since we are optimizing for server workloads, some default values are not optimized any more. We change some of those values that I feel it's less prone to regression bugs.
Test Plan: make all check
Reviewers: dhruba, haobo, ljin, igor, yhchiang
Reviewed By: igor
CC: leveldb, MarkCallaghan
Differential Revision: https://reviews.facebook.net/D16995
Summary: In one of the perf, I shows 10%-25% CPU costs of MemTableIterator.Seek(), when doing dynamic prefix seek, are spent on checking whether we need to do bloom filter check or finding out the prefix extractor. Seems that more level of pointer checking makes CPU cache miss more likely. This patch makes things slightly simpler by copying pointer of bloom of prefix extractor into the iterator.
Test Plan: make all check
Reviewers: haobo, ljin
Reviewed By: ljin
CC: igor, dhruba, yhchiang, leveldb
Differential Revision: https://reviews.facebook.net/D17247
Summary:
By constraining the probes within cache line(s), we can improve the
cache miss rate thus performance. This probably only makes sense for
in-memory workload so defaults the option to off.
Numbers and comparision can be found in wiki:
https://our.intern.facebook.com/intern/wiki/index.php/Ljin/rocksdb_perf/2014_03_17#Bloom_Filter_Study
Test Plan: benchmarked this change substantially. Will run make all check as well
Reviewers: haobo, igor, dhruba, sdong, yhchiang
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17133
Summary: Fix the bug in MergeUtil which causes mixing values of different keys.
Test Plan:
stringappend_test
make all check
Reviewers: haobo, igor
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17235
Summary:
NewFixedPrefixTransform is leaked in default options. Broken by b47812fba6
Also included in the diff some code cleanup
Test Plan:
valgrind env_test
also make check
Reviewers: haobo, danguo, yhchiang
Reviewed By: danguo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17211
Summary:
Previously, we used to sort all files by BySmallestFirst comparator and then re-sort level0 files in the Finalize() (recently moved to end of SaveTo).
In this diff, I chose the correct comparator at the beginning and sort the files correctly in Builder::SaveTo.
I also added a verification that all files are sorted correctly in CheckConsistency()
NOTE: This diff depends on D17037
Test Plan: make check. Will also run db_stress
Reviewers: dhruba, haobo, sdong, ljin
Reviewed By: ljin
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17049
Summary:
AssertHeld() was a no-op before. Now it does things.
Also, this change caught a bad bug in SuperVersion::Init(). The method is calling db->mutex.AssertHeld(), but db variable is not initialized yet! I also fixed that issue.
Test Plan: make check
Reviewers: dhruba, haobo, ljin, sdong, yhchiang
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17193
Summary: We don't preallocate MANIFEST file, even though we have an option for that. This diff preallocates manifest file every time we create it
Test Plan: make check
Reviewers: dhruba, haobo
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17163
Summary:
This is the part that was not finished when doing the Options.max_num_files=-1 feature. For iterating non level0 SST files (which was done using two level iterator), table cache is not bypassed. With this patch, the leftover feature is done.
Test Plan: make all check; change Options.max_num_files=-1 in one of the tests to cover the codes.
Reviewers: haobo, igor, dhruba, ljin, yhchiang
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17001
Summary:
Add assert(operands_list.size() >= 2) in MergeOperator::PartialMergeMulti
to ensure it's only be called when we have at least two merge operands.
Test Plan: run merge_test and stringappend_test.
Reviewers: haobo, igor
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17169
Summary:
Currently if client uses kNULLString as the prefix, it will confuse
compaction filter v2. This diff added a bool to indicate if the prefix
has been intialized. I also added a unit test to cover this case and
make sure the new code path is hit.
Test Plan: db_test
Reviewers: igor, haobo
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17151
Summary:
Fix a bug that PartialMergeMulti will try to merge the first operand
with an empty slice.
Test Plan: run stringappend_test and merge_test.
Reviewers: haobo, igor
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17157
Summary:
This diff adds a new CompactionFilterV2 API that roll up the
decisions of kv pairs during compactions. These kv pairs must share the
same key prefix. They are buffered inside the db.
typedef std::vector<Slice> SliceVector;
virtual std::vector<bool> Filter(int level,
const SliceVector& keys,
const SliceVector& existing_values,
std::vector<std::string>* new_values,
std::vector<bool>* values_changed
) const = 0;
Application can override the Filter() function to operate
on the buffered kv pairs. More details in the inline documentation.
Test Plan:
make check. Added unit tests to make sure Keep, Delete,
Change all works.
Reviewers: haobo
CCs: leveldb
Differential Revision: https://reviews.facebook.net/D15087
Summary:
* PartialMerge api now takes a list of operands instead of two operands.
* Add min_pertial_merge_operands to Options, indicating the minimum
number of operands to trigger partial merge.
* This diff is based on Schalk's previous diff (D14601), but it also
includes necessary changes such as updating the pure C api for
partial merge.
Test Plan:
* make check all
* develop tests for cases where partial merge takes more than two
operands.
TODOs (from Schalk):
* Add test with min_partial_merge_operands > 2.
* Perform benchmarks to measure the performance improvements (can probably
use results of task #2837810.)
* Add description of problem to doc/index.html.
* Change wiki pages to reflect the interface changes.
Reviewers: haobo, igor, vamsi
Reviewed By: haobo
CC: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D16815
Summary:
Everytime a client opens a DB, we do a sanity check that:
* checks the existance of all the necessary files
* verifies that file sizes are correct
Some of the code was stolen from https://reviews.facebook.net/D16935
Test Plan: added a unit test
Reviewers: dhruba, haobo, sdong
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17097
Summary: Added a function/command to check the consistency of live files' meta data
Test Plan:
Manual test (size mismatch, file not exist).
Command test script.
Reviewers: haobo
Reviewed By: haobo
CC: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D16935
Summary:
Whenever we get an IOError from GetImpl() or NewIterator(), we should immediatelly mark the DB read-only. The same check already exists in Write() and Compaction().
This should help with clients that are somehow missing a file.
Test Plan: make check
Reviewers: dhruba, haobo, sdong, ljin
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17061
Summary: D17067 breaks DBTest.UniversalCompactionTrigger because of wrong location of the checking. Fix it.
Test Plan: Run the test and make sure it passes.
Reviewers: igor, haobo
Reviewed By: igor
CC: dhruba, ljin, yhchiang, leveldb
Differential Revision: https://reviews.facebook.net/D17079
Summary: Add unit tests to make sure CompactionFilterContext::is_manual_compaction_ and CompactionFilterContext::is_full_compaction_ are set correctly.
Test Plan: run the new tests.
Reviewers: haobo, igor, dhruba, yhchiang, ljin
Reviewed By: haobo
CC: nkg-, leveldb
Differential Revision: https://reviews.facebook.net/D17067
Summary:
As it turns out, we need the call to ComputeCompactionScore (previously: Finalize) in CompactionPicker.
The issue caused a deadlock in db_stress: http://ci-builds.fb.com/job/rocksdb_crashtest/290/console
The last two lines before a deadlock were:
2014/03/18-22:43:41.481029 7facafbee700 (Original Log Time 2014/03/18-22:43:41.480989) Compaction nothing to do
2014/03/18-22:43:41.481041 7faccf7fc700 wait for fewer level0 files...
"Compaction nothing to do" and other thread waiting for fewer level0 files. Hm hm.
I moved the pre-sorting to SaveTo, which should fix both the original and the new issue.
Test Plan: make check for now, will run db_stress in jenkins
Reviewers: dhruba, haobo, sdong
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17037
Summary:
We have an issue with internal service trying to run compaction with zero input files:
2014/02/07-02:26:58.386531 7f79117ec700 Compaction start summary: Base version 1420 Base level 3, seek compaction:0, inputs:[Ï›~^Qy^?],[]
2014/02/07-02:26:58.386539 7f79117ec700 Compacted 0@3 + 0@4 files => 0 bytes
There are two issues:
* inputsummary is printing out junk
* it's constantly retrying (since I guess madeProgress is true), so it prints out a lot of data in the LOG file (40GB in one day).
I read through the Level compaction picker and added some failure condition if input[0] is empty. I think PickCompaction() should not return compaction with zero input files with this change. I'm not confident enough to add an assertion though :)
Test Plan: make check
Reviewers: dhruba, haobo, sdong, kailiu
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16005
Summary:
This is a 500ns operation while the whole Get() call takes only a few
micro!
Test Plan: ran db_bench, for a DB with 50M keys, QPS jumps from 5.2M/s to 7.2M/s
Reviewers: haobo, igor, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17007
Summary: Add a property to calculate number of background errors encountered to help users build their monitoring
Test Plan: Add a unit test. make all check
Reviewers: haobo, igor, dhruba
Reviewed By: igor
CC: ljin, nkg-, yhchiang, leveldb
Differential Revision: https://reviews.facebook.net/D16959
Summary: To partly address the request @nkg- raised, add three easy-to-add properties to compactions and flushes.
Test Plan: run unit tests and add a new unit test to cover new properties.
Reviewers: haobo, dhruba
Reviewed By: dhruba
CC: nkg-, leveldb
Differential Revision: https://reviews.facebook.net/D13677
Summary:
Finalize re-sorts (read: mutates) the files_ in Version* and it is called by CompactionPicker during normal runtime. At the same time, this same Version* lives in the SuperVersion* and is accessed without the mutex in GetImpl() code path.
Mutating the files_ in one thread and reading the same files_ in another thread is a bad idea. It caused this issue: http://ci-builds.fb.com/job/rocksdb_crashtest/285/console
Long-term, we need to be more careful with method contracts and clearly document what state can be mutated when. Now that we are much faster because we don't lock in GetImpl(), we keep running into data races that were not a problem before when we were slower. db_stress has been very helpful in detecting those.
Short-term, I removed Finalize() from CompactionPicker.
Note: I believe this is an issue in current 2.7 version running in production.
Test Plan:
make check
Will also run db_stress to see if issue is gone
Reviewers: sdong, ljin, dhruba, haobo
Reviewed By: sdong
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16983
Summary:
There is a chance that an old MANIFEST is corrupted in 2.7 but just not noticed.
This check would fail them. Change it to log instead of returning a
Corruption status.
Test Plan: make
Reviewers: haobo, igor
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16923
Summary:
Based on my recent findings (posted in our internal group), if we use fallocate without KEEP_SIZE flag, we get superior performance of fdatasync() in append-only workloads.
This diff provides an option for user to not use KEEP_SIZE flag, thus optimizing his sync performance by up to 2x-3x.
At one point we also just called posix_fallocate instead of fallocate, which isn't very fast: http://code.woboq.org/userspace/glibc/sysdeps/posix/posix_fallocate.c.html (tl;dr it manually writes out zero bytes to allocate storage). This diff also fixes that, by first calling fallocate and then posix_fallocate if fallocate is not supported.
Test Plan: make check
Reviewers: dhruba, sdong, haobo, ljin
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16761
Summary:
When the manifest is getting rolled the following happens:
1) manifest_file_number_ is assigned to a new manifest number (even though the old one is still current)
2) mutex is unlocked
3) SetCurrentFile() creates temporary file manifest_file_number_.dbtmp
4) SetCurrentFile() renames manifest_file_number_.dbtmp to CURRENT
5) mutex is locked
If FindObsoleteFiles happens between (3) and (4) it will:
1) Delete manifest_file_number_.dbtmp (because it's not in pending_outputs_)
2) Delete old manifest (because the manifest_file_number_ already points to a new one)
I introduce the concept of prev_manifest_file_number_ that will avoid the race condition.
However, we should discuss the future of MANIFEST file rolling. We found some race conditions with it last week and who knows how many more are there. Nobody is using it in production because we don't trust the implementation. Should we even support it?
Test Plan: make check
Reviewers: ljin, dhruba, haobo, sdong
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16929
Summary:
Memtable will now be forced to flush if the one of the following
conditions is met:
1. Already allocated more than write_buffer_size + 60% arena block size.
(the overflowing condition)
2. Unable to safely allocate one more arena block without hitting the
overflowing condition AND the unused allocated memory < 25% arena
block size.
Test Plan: make all check
Reviewers: sdong, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16893
Summary: Prev() now can hang when there is a key with more than max_skipped number of appearance internally but all of them are newer than the sequence ID to seek. Add unit tests to confirm the bug and fix it.
Test Plan: make all check
Reviewers: igor, haobo
Reviewed By: igor
CC: ljin, yhchiang, leveldb
Differential Revision: https://reviews.facebook.net/D16899
Summary:
In the last fix, I forgot to point to the writer when comparing edit,
which is apparently not correct.
Test Plan: still running make whitebox_crash_test
Reviewers: igor, haobo, igor2
Reviewed By: igor2
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16911
Summary:
Here is what it can cause probelm:
There is one memtable flush and one compaction. Both call LogAndApply(). If both edits are applied in the same batch with flush edit first and the compaction edit followed. LogAndApplyHelper() will assign compaction edit current VersionSet's log number(which should be smaller than the log number from flush edit). It cause log_numbers in MANIFEST to be not monotonic increasing, which violates the assume Recover() makes. What is more is after comitting to MANIFEST file, log_number_ in VersionSet is updated to the log_number from the last edit, which is the compaction one. It ends up not updating the log_number.
Test Plan:
make whitebox_crash_test
got another assertion about iter->valid(), not sure if that is related
to this.
Reviewers: igor, haobo
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16875
Summary: Client doesn't need to know anything about ColumnFamily ID. By making WriteBatch take ColumnFamilyHandle as a parameter, we can eliminate method GetID() from ColumnFamilyHandle
Test Plan: column_family_test
Reviewers: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16887
Summary:
Original Summary:
Yesterday, @ljin and I were debugging various db_stress issues. We suspected one of them happens when we concurrently call NewIterator without prefix_seek on HashSkipList. This test demonstrates it.
Update:
Arena is not thread-safe!! When creating a new full iterator, we *have* to create a new arena, otherwise we're doomed.
Test Plan: SIGSEGV and assertion-throwing test now works!
Reviewers: ljin, haobo, sdong
Reviewed By: sdong
CC: leveldb, ljin
Differential Revision: https://reviews.facebook.net/D16857
Summary:
With D16767, there is a case compaction tasks are scheduled infinitely:
(1) no flush thread is configured and more than 1 compaction threads
(2) a flush is going on by one compaction hread
(3) the state of SST files is in the state that versions_->current()->NeedsCompaction() will generate a false positive (return true actually there is no work to be done)
In that case, a infinite loop will be formed.
This patch would fix it.
Test Plan: make all check
Reviewers: haobo, igor, ljin
Reviewed By: igor
CC: dhruba, yhchiang, leveldb
Differential Revision: https://reviews.facebook.net/D16863
Summary:
This is is based on https://reviews.facebook.net/D15027. It's not finished but I would like to give a prototype to avoid arena over-allocation while making better use of the already allocated memory blocks.
Instead of check approximate memtable size, we will take a deeper look at the arena, which incorporate essential idea that @sdong suggests: flush when arena has allocated its last and the last is "almost full"
Test Plan: N/A
Reviewers: haobo, sdong
Reviewed By: sdong
CC: leveldb, sdong
Differential Revision: https://reviews.facebook.net/D15051
Summary:
I'm cleaning up some code preparing for the big diff review tomorrow. This is the first part of the cleanup.
Changes are mostly cosmetic. The goal is to decrease amount of code difference between columnfamilies and master branch.
This diff also fixes race condition when dropping column family.
Test Plan: Ran db_stress with variety of parameters
Reviewers: dhruba, haobo
Differential Revision: https://reviews.facebook.net/D16833
Summary: A bad Auto-Merge caused log buffer is flushed twice. Remove the unintended one.
Test Plan: Should already be tested (the code looks the same as when I ran unit tests).
Reviewers: haobo, igor
Reviewed By: haobo
CC: ljin, yhchiang, leveldb
Differential Revision: https://reviews.facebook.net/D16821
Summary:
@igor pointed out that there is a potential data race because of the way we use the newly introduced LogBuffer. After "bg_compaction_scheduled_--" or "bg_flush_scheduled_--", they can both become 0. As soon as the lock is released after that, DBImpl's deconstructor can go ahead and deconstruct all the states inside DB, including the info_log object hold in a shared pointer of the options object it keeps. At that point it is not safe anymore to continue using the info logger to write the delayed logs.
With the patch, lock is released temporarily for log buffer to be flushed before "bg_compaction_scheduled_--" or "bg_flush_scheduled_--". In order to make sure we don't miss any pending flush or compaction, a new flag bg_schedule_needed_ is added, which is set to be true if there is a pending flush or compaction but not scheduled because of the max thread limit. If the flag is set to be true, the scheduling function will be called before compaction or flush thread finishes.
Thanks @igor for this finding!
Test Plan: make all check
Reviewers: haobo, igor
Reviewed By: haobo
CC: dhruba, ljin, yhchiang, igor, leveldb
Differential Revision: https://reviews.facebook.net/D16767
Summary:
I had this diff for a while to test column families implementation. Last night, I ran it sucessfully for 10 hours with the command:
time ./db_stress --threads=30 --ops_per_thread=200000000 --max_key=5000 --column_families=20 --clear_column_family_one_in=3000000 --verify_before_write=1 --reopen=50 --max_background_compactions=10 --max_background_flushes=10 --db=/tmp/db_stress
It is ready to be committed :)
Test Plan: Ran it for 10 hours
Reviewers: dhruba, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16797
Summary: To temp fix the log buffer flushing. Flush the buffer inside the lock. Clean the trunk before we find an eventual fix.
Test Plan: make all check
Reviewers: haobo, igor
Reviewed By: igor
CC: ljin, leveldb, yhchiang
Differential Revision: https://reviews.facebook.net/D16791
Summary: Having code after SignalAll has already caused 2 bugs. Let's make sure this doesn't happen again.
Test Plan: no test
Reviewers: sdong, dhruba, haobo
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16785
Summary: Column family should be dropped after the change has been commited
Test Plan: db stress
Reviewers: dhruba, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16779
Summary: as title. also made info log output of file deletion a bit more descriptive.
Test Plan: make check; db_bench and look at LOG output
Reviewers: igor
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16731
Summary:
(1) Fix SanitizeOptions() to also check HashLinkList. The current
dynamic case just happens to work because the 2 classes have the same
layout.
(2) Do not delete SliceTransform object in HashSkipListFactory and
HashLinkListFactory destructor. Reason: SanitizeOptions() enforces
prefix_extractor and SliceTransform to be the same object when
Hash**Factory is used. This makes the behavior strange: when
Hash**Factory is used, prefix_extractor will be released by RocksDB. If
other memtable factory is used, prefix_extractor should be released by
user.
Test Plan: db_bench && make asan_check
Reviewers: haobo, igor, sdong
Reviewed By: igor
CC: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D16587
Summary: KSVObsolete is no longer nullptr and needs to be checked explicitly. Also did some minor code cleanup and added a stat counter to track superversion cleanups incurred in the foreground.
Test Plan: make check
Reviewers: ljin
Reviewed By: ljin
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16701
Summary: Moved LogBuffer class to an internal header. Removed some unneccesary indirection. Enabled log buffer for BackgroundCallFlush. Forced log buffer flush right after Unlock to improve time ordering of info log.
Test Plan: make check; db_bench compare LOG output
Reviewers: sdong
Reviewed By: sdong
CC: leveldb, igor
Differential Revision: https://reviews.facebook.net/D16707
Summary:
If verify_checksums_in_compaction is true, compaction will verify checksums. This is default.
If it's false, compaction doesn't verify checksums. This is useful for in-memory workloads.
Test Plan: corruption_test
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16695
Summary: Adding the last missing function -- NewIterators(). Pretty simple implementation
Test Plan: added a unit test
Reviewers: dhruba, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16689
Summary:
Add a check at the end of GetImpl to release SuperVersion if it becomes
obsolete. Also do Scrape() inside InstallSuperVersion so it happens more
frequent.
Test Plan:
make all check
running asan_check now
Reviewers: igor, haobo, sdong, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16641
Summary: Now while the background thread is picking compactions, it writes out multiple info_logs, especially for universal compaction, which introduces a chance of waiting log writing in mutex, which is bad. To remove this risk, write all those info logs to a buffer and flush it after releasing the mutex.
Test Plan:
make all check
check the log lines while running some tests that trigger compactions.
Reviewers: haobo, igor, dhruba
Reviewed By: dhruba
CC: i.am.jin.lei, dhruba, yhchiang, leveldb, nkg-
Differential Revision: https://reviews.facebook.net/D16515
Summary:
Column family IDs should be unique, even if column family is dropped. To achieve this, we save max column family in manifest.
Note that the diff is still not ready. I'm only using differential to move the patch to my Mac machine.
Test Plan: added a test to column_family_test
Reviewers: dhruba, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16581
Summary:
Add helper function to print perf context data in db_bench if enabled.
I didn't find any code that actually exports perf context data. Not sure
if I missed anything
Test Plan: ran db_bench
Reviewers: haobo, sdong, igor
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16575
Summary:
For HashSkipList case, DBImpl has sanity check to see if prefix_extractor in
options is the same as the one in memtable factory. If not, it falls
back to SkipList. As result, I was experimenting with SkipList
performance. No wonder it is much worse than LinkedList
Test Plan: ran benchmark
Reviewers: haobo, sdong, igor
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16569
Summary: as title
Test Plan: make release
Reviewers: haobo, sdong, igor
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16437
Summary: I wrote a test that triggers assertion in MergingIterator. I have not touched that code ever, so I'm looking for somebody with good understanding of the MergingIterator code to fix this. The solution is probably a one-liner. Let me know if you're willing to take a look.
Test Plan: This test fails with an assertion `use_heap_ == false`
Reviewers: dhruba, haobo, sdong, kailiu
Reviewed By: sdong
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16521
Summary:
Two changes:
1. DeletionState is only constructed when cleaning up is needed
2. Fix the bug of deletion state construction bug. A change was made in a previous patch: https://reviews.facebook.net/rROCKSDB774ed89c2405ee058086b099cbc8b29e243739cc#71a34e2e However, it somehow got lost when merging
Test Plan: make all check
Reviewers: kailiu, haobo, igor
Reviewed By: igor
CC: igor, dhruba, i.am.jin.lei, yhchiang, leveldb
Differential Revision: https://reviews.facebook.net/D16233
Summary: When column family is dropped, we want to delete all WALs that refer to it. To do that, we need to make them obsolete by flushing all the memtables
Test Plan: column_family_test
Reviewers: dhruba, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16557
Summary:
The issue is that when FLAGS_num is small, the leading bytes of the key
are padded with 0s. This makes all keys have the same prefix 00000000
Most of the changes are just to make lint happy
Test Plan: ran db_bench
Reviewers: sdong, haobo, igor
Reviewed By: sdong
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16317
Summary: Added a function DeleteSuperVersion that can be called in DBImpl destructor before PurgingObsoleteFiles. That way, PurgeObsoleteFiles will be able to delete all files held by alive super versions.
Test Plan: column_family_test with valgrind
Reviewers: dhruba, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16545
Summary:
this is the key component extracted from diff: https://reviews.facebook.net/D14271
I separate it to a dedicated patch to make the review easier.
Test Plan: added a unit test and passed it.
Reviewers: haobo, sdong, dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16245
Summary:
EncodeTo(&record) does not overwrite, it appends to it.
This means that group commit log and apply will look something like:
record1
record1record2
record1record2record3
I'm surprised this didn't show up in production, but I think the reason is that MANIFEST group commit almost never happens.
This bug turned up in column family work, where opening a database failed with "adding a same column family twice".
Test Plan: Tested the change in column family branch and observed that the problem is gone (with db_stress)
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16461
Summary:
This diff fixes two bugs:
* Increase sequence number even if WriteBatch fails. This is important because WriteBatches in WAL logs have implictly increasing sequence number, even if one update in a write batch fails. This caused some writes to get lost in my CF stress testing
* Tolerate 'invalid column family' errors on recovery. When a column family is dropped, processing WAL logs can have some WriteBatches that still refer to the dropped column family. In recovery environment, we want to ignore those errors. In client's Write() code path, however, we want to return the failure to the client if he's trying to add data to invalid column family.
Test Plan: db_stress's verification works now
Reviewers: dhruba, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16533
Summary:
Previous code is too convoluted and I must be drunk for letting
such code to be written without a second thought.
Thanks to the discussion with @sdong, I added the `Options` when
generating the flusher, thus avoiding the tricks.
Just FYI: I resisted to add Options in flush_block_policy.h since I
wanted to avoid cyclic dependencies: FlushBlockPolicy dpends on Options
and Options also depends FlushBlockPolicy... While I appreciate my
effort to prevent it, the old design turns out creating more troubles than
it tried to avoid.
Test Plan: ran ./table_test
Reviewers: sdong
Reviewed By: sdong
CC: sdong, leveldb
Differential Revision: https://reviews.facebook.net/D16503
Summary:
I though I might get away with as little changes to LogAndApply() as possible. It turns out this is not the case.
This diff introduces different behavior of LogAndApply() for three cases:
1. column family add
2. column family drop
3. no-column family manipulation
(1) and (2) don't support group commit yet.
There were a lot of problems with old version od LogAndApply, detected by db_stress. The biggest was non-atomicity of manifest writes and metadata changes (i.e. if column family add is in manifest, it also has to be in in-memory data structure).
Test Plan: db_stress
Reviewers: dhruba, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16491
Summary:
This diff does two things:
(1) Log::Reader does not report a corruption when the last record in a log or manifest file is truncated (meaning that log writer died in the middle of the write). Inherited the code from LevelDB: https://code.google.com/p/leveldb/source/detail?r=269fc6ca9416129248db5ca57050cd5d39d177c8#
(2) Turn off mmap writes for all writes to log and manifest files
(2) is necessary because if we use mmap writes, the last record is not truncated, but is actually filled with zeros, making checksum fail. It is hard to recover from checksum failing.
Test Plan:
Added unit tests from LevelDB
Actually recovered a "corrupted" MANIFEST file.
Reviewers: dhruba, haobo
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16119
Summary:
Add an optional input parameter ReadOptions to DB::GetUpdateSince(),
which allows the verification of checksums to be disabled by setting
ReadOptions::verify_checksums to false.
Test Plan: Tests are done off-line and will not be included in the regular unit test.
Reviewers: igor
Reviewed By: igor
CC: leveldb, xjin, dhruba
Differential Revision: https://reviews.facebook.net/D16305
Summary:
This fixes few bugs with CreateColumnFamily
* We first have to LogAndApply and then call VersionSet::CreateColumnFamily. Otherwise, WriteSnapshot might be invoked, writing out column family add inside of LogAndApply, even though it's not really committed
* Fix LogAndApplyHelper() to not apply log number to column_family_data, which is in case of column family add, just a dummy (default) column family
* Create SuperVerion when creating column family
Test Plan: column_family_test
Reviewers: dhruba, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16443
Summary:
Previously, we first wrote to the manifest and then created internal data structure.
Now, we first create internal data structure. That way, we can write out internal comparator to the manifest
Test Plan: column_family_test
Reviewers: dhruba, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16425
Summary: Added list_column_family command and also updated dump_manifest
Test Plan: no
Reviewers: dhruba, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16419
Summary: as title
Test Plan:
asan_check
will post results later
Reviewers: haobo, igor, dhruba, sdong
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16257
Summary: If we sleep for 300ms the test fails in valgrind because it takes more than 300ms to flush. This way we WaitForFlush() when we're expecting flush, but still sleep and check if the flush happens even though it's not supposed to.
Test Plan: notest
Reviewers: dhruba, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16401
Summary:
Two new column family tests:
* DifferentMergeOperators -- three column families, one without merge operator, one with add operator and one with append operator. verify that operations work as expected.
* DifferentCompactionStyles -- three column families, two with level compactions and one with universal compaction. trigger the compactions and verify they work as expected.
Test Plan: nope
Reviewers: dhruba, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16377
Summary: Retry GetSortedWalFiles() and also wait 20ms before counting number of log files. WaitForFlush() doesn't necessarily wait for logs to be deleted, since logs are deleted outside of the mutex.
Test Plan: column_family_test
Reviewers: dhruba, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16371
Summary: New unit tests for column families
Test Plan: this is a test
Reviewers: dhruba, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16359
Summary: Big CF diff uncovered some lint errors. This diff fixes some of them. Not much to see here
Test Plan: make check
Reviewers: dhruba, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16347
Summary:
* Add ColumnFamilyHandle::GetID() function. Client needs to know column family's ID to be able to construct WriteBatch
* Handle WriteBatch::Handler failure gracefully. Since WriteBatch is not a very smart function (it takes raw CF id), client can add data to WriteBatch for column family that doesn't exist. In that case, we need to gracefully return failure status from DB::Write(). To do that, I added a return Status to WriteBatch functions PutCF, DeleteCF and MergeCF.
Test Plan: Added test to column_family_test
Reviewers: dhruba, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16323
Summary:
* Added unit test that verifies that obsolete files are deleted.
* Advance log number for empty column family when cutting log file.
* MinLogNumber() bug fix! (caught by the new unit test)
Test Plan: unit test
Reviewers: dhruba, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16311
Summary: Even if user flushes the memtables before getting live files, we still can't guarantee that new data didn't come in (to already-flushed memtables). If we want backups to provide consistent view of the database, we still need to get WAL files.
Test Plan: backupable_db_test
Reviewers: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16299
