Commit Graph

24 Commits

Author SHA1 Message Date
mrambacher
3dff28cf9b Use SystemClock* instead of std::shared_ptr<SystemClock> in lower level routines (#8033)
Summary:
For performance purposes, the lower level routines were changed to use a SystemClock* instead of a std::shared_ptr<SystemClock>.  The shared ptr has some performance degradation on certain hardware classes.

For most of the system, there is no risk of the pointer being deleted/invalid because the shared_ptr will be stored elsewhere.  For example, the ImmutableDBOptions stores the Env which has a std::shared_ptr<SystemClock> in it.  The SystemClock* within the ImmutableDBOptions is essentially a "short cut" to gain access to this constant resource.

There were a few classes (PeriodicWorkScheduler?) where the "short cut" property did not hold.  In those cases, the shared pointer was preserved.

Using db_bench readrandom perf_level=3 on my EC2 box, this change performed as well or better than 6.17:

6.17: readrandom   :      28.046 micros/op 854902 ops/sec;   61.3 MB/s (355999 of 355999 found)
6.18: readrandom   :      32.615 micros/op 735306 ops/sec;   52.7 MB/s (290999 of 290999 found)
PR: readrandom   :      27.500 micros/op 871909 ops/sec;   62.5 MB/s (367999 of 367999 found)

(Note that the times for 6.18 are prior to revert of the SystemClock).

Pull Request resolved: https://github.com/facebook/rocksdb/pull/8033

Reviewed By: pdillinger

Differential Revision: D27014563

Pulled By: mrambacher

fbshipit-source-id: ad0459eba03182e454391b5926bf5cdd45657b67
2021-03-15 04:34:11 -07:00
mrambacher
12f1137355 Add a SystemClock class to capture the time functions of an Env (#7858)
Summary:
Introduces and uses a SystemClock class to RocksDB.  This class contains the time-related functions of an Env and these functions can be redirected from the Env to the SystemClock.

Many of the places that used an Env (Timer, PerfStepTimer, RepeatableThread, RateLimiter, WriteController) for time-related functions have been changed to use SystemClock instead.  There are likely more places that can be changed, but this is a start to show what can/should be done.  Over time it would be nice to migrate most (if not all) of the uses of the time functions from the Env to the SystemClock.

There are several Env classes that implement these functions.  Most of these have not been converted yet to SystemClock implementations; that will come in a subsequent PR.  It would be good to unify many of the Mock Timer implementations, so that they behave similarly and be tested similarly (some override Sleep, some use a MockSleep, etc).

Additionally, this change will allow new methods to be introduced to the SystemClock (like https://github.com/facebook/rocksdb/issues/7101 WaitFor) in a consistent manner across a smaller number of classes.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7858

Reviewed By: pdillinger

Differential Revision: D26006406

Pulled By: mrambacher

fbshipit-source-id: ed10a8abbdab7ff2e23d69d85bd25b3e7e899e90
2021-01-25 22:09:11 -08:00
Yanqin Jin
394210f280 Remove unused includes (#7604)
Summary:
This is a PR generated **semi-automatically** by an internal tool to remove unused includes and `using` statements.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7604

Test Plan: make check

Reviewed By: ajkr

Differential Revision: D24579392

Pulled By: riversand963

fbshipit-source-id: c4bfa6c6b08da1de186690d37eb73d8fff45aecd
2020-10-28 23:22:27 -07:00
mrambacher
f35f7f2704 Fix many tests to run with MEM_ENV and ENCRYPTED_ENV; Introduce a MemoryFileSystem class (#7566)
Summary:
This PR does a few things:

1.  The MockFileSystem class was split out from the MockEnv.  This change would theoretically allow a MockFileSystem to be used by other Environments as well (if we created a means of constructing one).  The MockFileSystem implements a FileSystem in its entirety and does not rely on any Wrapper implementation.

2.  Make the RocksDB test suite work when MOCK_ENV=1 and ENCRYPTED_ENV=1 are set.  To accomplish this, a few things were needed:
- The tests that tried to use the "wrong" environment (Env::Default() instead of env_) were updated
- The MockFileSystem was changed to support the features it was missing or mishandled (such as recursively deleting files in a directory or supporting renaming of a directory).

3.  Updated the test framework to have a ROCKSDB_GTEST_SKIP macro.  This can be used to flag tests that are skipped.  Currently, this defaults to doing nothing (marks the test as SUCCESS) but will mark the tests as SKIPPED when RocksDB is upgraded to a version of gtest that supports this (gtest-1.10).

I have run a full "make check" with MEM_ENV, ENCRYPTED_ENV,  both, and neither under both MacOS and RedHat.  A few tests were disabled/skipped for the MEM/ENCRYPTED cases.  The error_handler_fs_test fails/hangs for MEM_ENV (presumably a timing problem) and I will introduce another PR/issue to track that problem.  (I will also push a change to disable those tests soon).  There is one more test in DBTest2 that also fails which I need to investigate or skip before this PR is merged.

Theoretically, this PR should also allow the test suite to run against an Env loaded from the registry, though I do not have one to try it with currently.

Finally, once this is accepted, it would be nice if there was a CircleCI job to run these tests on a checkin so this effort does not become stale.  I do not know how to do that, so if someone could write that job, it would be appreciated :)

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7566

Reviewed By: zhichao-cao

Differential Revision: D24408980

Pulled By: jay-zhuang

fbshipit-source-id: 911b1554a4d0da06fd51feca0c090a4abdcb4a5f
2020-10-27 10:33:09 -07:00
Zhichao Cao
d8ec0a760a Make FileType Public and Replace kLogFile with kWalFile (#7580)
Summary:
As suggested by pdillinger ,The name of kLogFile is misleading, in some tests, kLogFile is defined as info log. Replace it with kWalFile and move it to public, which will be used in https://github.com/facebook/rocksdb/issues/7523

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7580

Test Plan: make check

Reviewed By: riversand963

Differential Revision: D24485420

Pulled By: zhichao-cao

fbshipit-source-id: 955e3dacc1021bb590fde93b0a568ffe9ad80799
2020-10-22 17:06:20 -07:00
sdong
2496d3d4b8 Avoid to suppress status code in ~BlockBasedTableBuilder (#7507)
Summary:
We just used a hacky way to fix db_basic_test: suppress status code in ~BlockBasedTableBuilder. Rather, we should pass them back in Finish() and suppress them in Abandon().

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7507

Test Plan: Watch existing tests to succeed.

Reviewed By: riversand963

Differential Revision: D24119527

fbshipit-source-id: 71c4d4a81c0fd1c5595224692275f20f7759973a
2020-10-05 14:58:49 -07:00
Koby Kahane
3e745053b7 Fix MSVC-related build issues (#7439)
Summary:
This PR addresses some build and functional issues on MSVC targets, as a step towards an eventual goal of having RocksDB build successfully for Windows on ARM64.

Addressed issues include:
- BitsSetToOne and CountTrailingZeroBits do not compile on non-x64 MSVC targets. A fallback implementation of BitsSetToOne when Intel intrinsics are not available is added, based on the C++20 `<bit>` popcount implementation in Microsoft's STL.
- The implementation of FloorLog2 for MSVC targets (including x64) gives incorrect results. The unit test easily detects this, but CircleCI is currently configured to only run a specific set of tests for Windows CMake builds, so this seems to have been unnoticed.
- AsmVolatilePause does not use YieldProcessor on Windows ARM64 targets, even though it is available.
- When CondVar::TimedWait calls Microsoft STL's condition_variable::wait_for, it can potentially trigger a bug (just recently fixed in the upcoming VS 16.8's STL) that deadlocks various tests that wait for a timer to execute, since `Timer::Run` doesn't get a chance to execute before being blocked by the test function acquiring the mutex.
- In c_test, `GetTempDir` assumes a POSIX-style temp path.
- `NormalizePath` did not eliminate consecutive POSIX-style path separators on Windows, resulting in test failures in e.g., wal_manager_test.
- Various other test failures.

In a followup PR I hope to modify CircleCI's config.yml to invoke all RocksDB unit tests in Windows CMake builds with CTest, instead of the current use of `run_ci_db_test.ps1` which requires individual tests to be specified and is missing many of the existing tests.

Notes from peterd: FloorLog2 is not yet used in production code (it's for something in progress). I also added a few more inexpensive platform-dependent tests to Windows CircleCI runs. And included facebook/folly#1461 as requested

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7439

Reviewed By: jay-zhuang

Differential Revision: D24021563

Pulled By: pdillinger

fbshipit-source-id: 0ec2027c0d6a494d8a0fe38d9667fc2f7e29f7e7
2020-10-01 09:23:04 -07:00
Levi Tamasi
ac3ae1df0b Find/purge obsolete blob files (#6807)
Summary:
The patch extends `FindObsoleteFiles` and `PurgeObsoleteFiles` with
support for blob files. The behavior is analogous to SST files: obsolete
blob files are put on the "candidates for deletion" list, while live (and pending)
files are preserved.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6807

Test Plan: `make check`

Reviewed By: riversand963

Differential Revision: D21406249

Pulled By: ltamasi

fbshipit-source-id: 1948f71c31927564b61e8af394f50ca3964880d9
2020-05-07 09:32:51 -07:00
Cheng Chang
ee50b8d499 Be able to decrease background thread's CPU priority when creating database backup (#6602)
Summary:
When creating a database backup, the background threads will not only consume IO resources by copying files, but also consuming CPU such as by computing checksums. During peak times, the CPU consumption by the background threads might affect online queries.

This PR makes it possible to decrease CPU priority of these threads when creating a new backup.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6602

Test Plan: make check

Reviewed By: siying, zhichao-cao

Differential Revision: D20683216

Pulled By: cheng-chang

fbshipit-source-id: 9978b9ed9488e8ce135e90ca083e5b4b7221fd84
2020-03-28 19:07:25 -07:00
Zhichao Cao
4246888101 Pass IOStatus to write path and set retryable IO Error as hard error in BG jobs (#6487)
Summary:
In the current code base, we use Status to get and store the returned status from the call. Specifically, for IO related functions, the current Status cannot reflect the IO Error details such as error scope, error retryable attribute, and others. With the implementation of https://github.com/facebook/rocksdb/issues/5761, we have the new Wrapper for IO, which returns IOStatus instead of Status. However, the IOStatus is purged at the lower level of write path and transferred to Status.

The first job of this PR is to pass the IOStatus to the write path (flush, WAL write, and Compaction). The second job is to identify the Retryable IO Error as HardError, and set the bg_error_ as HardError. In this case, the DB Instance becomes read only. User is informed of the Status and need to take actions to deal with it (e.g., call db->Resume()).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6487

Test Plan: Added the testing case to error_handler_fs_test. Pass make asan_check

Reviewed By: anand1976

Differential Revision: D20685017

Pulled By: zhichao-cao

fbshipit-source-id: ff85f042896243abcd6ef37877834e26f36b6eb0
2020-03-27 16:04:43 -07:00
Yanqin Jin
fb09ef05dc Attempt to recover from db with missing table files (#6334)
Summary:
There are situations when RocksDB tries to recover, but the db is in an inconsistent state due to SST files referenced in the MANIFEST being missing. In this case, previous RocksDB will just fail the recovery and return a non-ok status.
This PR enables another possibility. During recovery, RocksDB checks possible MANIFEST files, and try to recover to the most recent state without missing table file. `VersionSet::Recover()` applies version edits incrementally and "materializes" a version only when this version does not reference any missing table file. After processing the entire MANIFEST, the version created last will be the latest version.
`DBImpl::Recover()` calls `VersionSet::Recover()`. Afterwards, WAL replay will *not* be performed.
To use this capability, set `options.best_efforts_recovery = true` when opening the db. Best-efforts recovery is currently incompatible with atomic flush.

Test plan (on devserver):
```
$make check
$COMPILE_WITH_ASAN=1 make all && make check
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6334

Reviewed By: anand1976

Differential Revision: D19778960

Pulled By: riversand963

fbshipit-source-id: c27ea80f29bc952e7d3311ecf5ee9c54393b40a8
2020-03-20 19:30:48 -07:00
Zhichao Cao
8d73137ae8 Replace Directory with FSDirectory in DB (#6468)
Summary:
In the current code base, we can use Directory from Env to manage directory (e.g, Fsync()). The PR https://github.com/facebook/rocksdb/issues/5761  introduce the File System as a new Env API. So we further replace the Directory class in DB with FSDirectory such that we can have more IO information from IOStatus returned by FSDirectory.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6468

Test Plan: pass make asan_check

Differential Revision: D20195261

Pulled By: zhichao-cao

fbshipit-source-id: 93962cb9436852bfcfb76e086d9e7babd461cbe1
2020-03-02 16:16:26 -08:00
sdong
fdf882ded2 Replace namespace name "rocksdb" with ROCKSDB_NAMESPACE (#6433)
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433

Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.

Differential Revision: D19977691

fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
2020-02-20 12:09:57 -08:00
sdong
b931f84e56 Divide file_reader_writer.h and .cc (#5803)
Summary:
file_reader_writer.h and .cc contain several files and helper function, and it's hard to navigate. Separate it to multiple files and put them under file/
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5803

Test Plan: Build whole project using make and cmake.

Differential Revision: D17374550

fbshipit-source-id: 10efca907721e7a78ed25bbf74dc5410dea05987
2019-09-16 10:33:51 -07:00
Vijay Nadimpalli
979fbdc696 Persistent globally unique DB ID in manifest (#5725)
Summary:
Each DB has a globally unique ID. A DB can be physically copied around, or backed-up and restored, and the users should be identify the same DB. This unique ID right now is stored as plain text in file IDENTITY under the DB directory. This approach introduces at least two problems: (1) the file is not checksumed; (2) the source of truth of a DB is the manifest file, which can be copied separately from IDENTITY file, causing the DB ID to be wrong.
The goal of this PR is solve this problem by moving the  DB ID to manifest. To begin with we will write to both identity file and manifest. Write to Manifest is controlled via the flag write_dbid_to_manifest in Options and default is false.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5725

Test Plan: Added unit tests.

Differential Revision: D16963840

Pulled By: vjnadimpalli

fbshipit-source-id: 8a86a4c8c82c716003c40fd6b9d2d758030d92e9
2019-09-03 08:52:24 -07:00
Vijay Nadimpalli
d150e01474 New API to get all merge operands for a Key (#5604)
Summary:
This is a new API added to db.h to allow for fetching all merge operands associated with a Key. The main motivation for this API is to support use cases where doing a full online merge is not necessary as it is performance sensitive. Example use-cases:
1. Update subset of columns and read subset of columns -
Imagine a SQL Table, a row is encoded as a K/V pair (as it is done in MyRocks). If there are many columns and users only updated one of them, we can use merge operator to reduce write amplification. While users only read one or two columns in the read query, this feature can avoid a full merging of the whole row, and save some CPU.
2. Updating very few attributes in a value which is a JSON-like document -
Updating one attribute can be done efficiently using merge operator, while reading back one attribute can be done more efficiently if we don't need to do a full merge.
----------------------------------------------------------------------------------------------------
API :
Status GetMergeOperands(
      const ReadOptions& options, ColumnFamilyHandle* column_family,
      const Slice& key, PinnableSlice* merge_operands,
      GetMergeOperandsOptions* get_merge_operands_options,
      int* number_of_operands)

Example usage :
int size = 100;
int number_of_operands = 0;
std::vector<PinnableSlice> values(size);
GetMergeOperandsOptions merge_operands_info;
db_->GetMergeOperands(ReadOptions(), db_->DefaultColumnFamily(), "k1", values.data(), merge_operands_info, &number_of_operands);

Description :
Returns all the merge operands corresponding to the key. If the number of merge operands in DB is greater than merge_operands_options.expected_max_number_of_operands no merge operands are returned and status is Incomplete. Merge operands returned are in the order of insertion.
merge_operands-> Points to an array of at-least merge_operands_options.expected_max_number_of_operands and the caller is responsible for allocating it. If the status returned is Incomplete then number_of_operands will contain the total number of merge operands found in DB for key.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5604

Test Plan:
Added unit test and perf test in db_bench that can be run using the command:
./db_bench -benchmarks=getmergeoperands --merge_operator=sortlist

Differential Revision: D16657366

Pulled By: vjnadimpalli

fbshipit-source-id: 0faadd752351745224ee12d4ae9ef3cb529951bf
2019-08-06 14:26:44 -07:00
Zhongyi Xie
d1c9ede195 Fix duplicated file names in PurgeObsoleteFiles (#5603)
Summary:
Currently in `DBImpl::PurgeObsoleteFiles`, the list of candidate files is create through a combination of calling LogFileName using `log_delete_files` and `full_scan_candidate_files`.

In full_scan_candidate_files, the filenames look like this
{file_name = "074715.log", file_path = "/txlogs/3306"},
but LogFileName produces filenames like this that prepends a slash:
{file_name = "/074715.log", file_path = "/txlogs/3306"},

This confuses the dedup step here: bb4178066d/db/db_impl/db_impl_files.cc (L339-L345)

Because duplicates still exist, DeleteFile is called on the same file twice, and hits an error on the second try. Error message: Failed to mark /txlogs/3302/764418.log as trash.

The root cause is the use of `kDumbDbName` when generating file names, it creates file names like /074715.log. This PR removes the use of `kDumbDbName` and create paths without leading '/' when dbname can be ignored.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5603

Test Plan: make check

Differential Revision: D16413203

Pulled By: miasantreble

fbshipit-source-id: 6ba8288382c55f7d5e3892d722fc94b57d2e4491
2019-08-01 15:50:05 -07:00
Zhongyi Xie
d68f9f4580 simplify include directive involving inttypes (#5402)
Summary:
When using `PRIu64` type of printf specifier, current code base does the following:
```
#ifndef __STDC_FORMAT_MACROS
#define __STDC_FORMAT_MACROS
#endif
#include <inttypes.h>
```
However, this can be simplified to
```
#include <cinttypes>
```
as long as flag `-std=c++11` is used.
This should solve issues like https://github.com/facebook/rocksdb/issues/5159
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5402

Differential Revision: D15701195

Pulled By: miasantreble

fbshipit-source-id: 6dac0a05f52aadb55e9728038599d3d2e4b59d03
2019-06-06 13:56:07 -07:00
Siying Dong
000b9ec217 Move some logging related files to logging/ (#5387)
Summary:
Many logging related source files are under util/. It will be more structured if they are together.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5387

Differential Revision: D15579036

Pulled By: siying

fbshipit-source-id: 3850134ed50b8c0bb40a0c8ae1f184fa4081303f
2019-05-31 17:23:59 -07:00
Zhongyi Xie
d7d8605f56 Fix a clang analyze warning (#5398)
Summary:
Clang analyzer is reporting a false positive warning thinking `type` is uninitialized. The variable is initialized by `ParseFileName` by reference so assigning a default value to keep clang happy.
Current failure:
```
file/filename.cc:435:15: warning: The left operand of '==' is a garbage value
        (type == kInfoLogFile)) {
         ~~~~ ^
1 warning generated.
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5398

Differential Revision: D15588421

Pulled By: miasantreble

fbshipit-source-id: fb121c270300f3a659e68bc7f6674ff4ddf2df9a
2019-05-31 17:02:51 -07:00
Siying Dong
cb094e13bb Auto roll logger to enforce options.keep_log_file_num immediately after a new file is created (#5370)
Summary:
Right now, with auto roll logger, options.keep_log_file_num enforcement is triggered by events like DB reopen or full obsolete scan happens. In the mean time, the size and number of log files can grow without a limit. We put a stronger enforcement to the option, so that the number of log files can always under control.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5370

Differential Revision: D15570413

Pulled By: siying

fbshipit-source-id: 0916c3c4d42ab8fdd29389ee7fd7e1557b03176e
2019-05-31 10:50:19 -07:00
Siying Dong
8843129ece Move some memory related files from util/ to memory/ (#5382)
Summary:
Move arena, allocator, and memory tools under util to a separate memory/ directory.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5382

Differential Revision: D15564655

Pulled By: siying

fbshipit-source-id: 9cd6b5d0d3d52b39606e19221fa154596e5852a5
2019-05-30 17:44:09 -07:00
Siying Dong
e9e0101ca4 Move test related files under util/ to test_util/ (#5377)
Summary:
There are too many types of files under util/. Some test related files don't belong to there or just are just loosely related. Mo
ve them to a new directory test_util/, so that util/ is cleaner.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5377

Differential Revision: D15551366

Pulled By: siying

fbshipit-source-id: 0f5c8653832354ef8caa31749c0143815d719e2c
2019-05-30 11:25:51 -07:00
Siying Dong
545d206040 Move some file related files outside util/ (#5375)
Summary:
util/ means for lower level libraries, so it's a good idea to move the files which requires knowledge to DB out. Create a file/ and move some files there.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5375

Differential Revision: D15550935

Pulled By: siying

fbshipit-source-id: 61a9715dcde5386eebfb43e93f847bba1ae0d3f2
2019-05-29 20:47:06 -07:00