Summary:
Commit 1b598213aa does not quite work as
intended. This patch fixes Travis by adding clang-format to the packages list
and excluding clang-format from the OSX build. In addition the build does not
stop when bad formatting is detected but the build still fails.
Test Plan: See https://travis-ci.org/facebook/rocksdb/builds/81037125
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D47223
Summary: FailOverwritingBackups has unexpected results when auto-compaction runs.
Test Plan: ran test a bunch of times
Reviewers: IslamAbdelRahman, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D47181
Summary:
This patch fixes#7460559. It introduces SingleDelete as a new database
operation. This operation can be used to delete keys that were never
overwritten (no put following another put of the same key). If an overwritten
key is single deleted the behavior is undefined. Single deletion of a
non-existent key has no effect but multiple consecutive single deletions are
not allowed (see limitations).
In contrast to the conventional Delete() operation, the deletion entry is
removed along with the value when the two are lined up in a compaction. Note:
The semantics are similar to @igor's prototype that allowed to have this
behavior on the granularity of a column family (
https://reviews.facebook.net/D42093 ). This new patch, however, is more
aggressive when it comes to removing tombstones: It removes the SingleDelete
together with the value whenever there is no snapshot between them while the
older patch only did this when the sequence number of the deletion was older
than the earliest snapshot.
Most of the complex additions are in the Compaction Iterator, all other changes
should be relatively straightforward. The patch also includes basic support for
single deletions in db_stress and db_bench.
Limitations:
- Not compatible with cuckoo hash tables
- Single deletions cannot be used in combination with merges and normal
deletions on the same key (other keys are not affected by this)
- Consecutive single deletions are currently not allowed (and older version of
this patch supported this so it could be resurrected if needed)
Test Plan: make all check
Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor
Reviewed By: igor
Subscribers: maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43179
Summary:
Some users have observed errors in the log file when
the log file or sst file is already deleted.
Test Plan:
Make sure that the errors do not appear for already deleted
files.
Reviewers: sdong
Reviewed By: sdong
Subscribers: anthony, kradhakrishnan, yhchiang, rven, igor, IslamAbdelRahman, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D47115
Summary: The diff modifies the condition checked to determine the bottommost level during compaction. Previously, absence of files in higher levels alone was used as the condition. Now, the function additionally evaluates if the higher levels have files which have non-overlapping key ranges, then the level can be safely considered as the bottommost level.
Test Plan: Unit test cases added and passing. However, unit tests of universal compaction are failing as a result of the changes made in this diff. Need to understand why that is happening.
Reviewers: igor
Subscribers: dhruba, sdong, lgalanis, meyering
Differential Revision: https://reviews.facebook.net/D46473
Summary: Now DB::Open() flushes info log before printing DB pointer, so it may not show up if no activity after DB open. Move log flushing from after printing options to printing DB pointer.
Test Plan: make commit-prereq
Reviewers: igor, IslamAbdelRahman, yhchiang, kradhakrishnan, anthony, rven
Reviewed By: rven
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D47121
Summary:
There were two minor issues with 9566342d28:
- The install command was doing `cmake` instead of `cmake .`
- `LIBRARY_PATH` was not set
Fix both issues.
Test Plan: Run tests on Travis: https://travis-ci.org/facebook/rocksdb/jobs/80699627 (bloom_test works now).
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D47103
Summary: Fix two constants in WaitFor() that multiply a value with 000 instead of 1000.
Test Plan: make clean all check
Reviewers: rven, anthony, yhchiang, aekmekji, sdong, MarkCallaghan, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D47091
Summary:
When running `make rocksdbjava V=1`, it currently does
not print out the original command but something odd instead:
mkdir -p jl/db
This patch tries to fix this issue.
Test Plan: make rocksdbjava V=1
Reviewers: igor, sdong, IslamAbdelRahman, meyering
Reviewed By: meyering
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D47061
Summary: Change the log level of DB start-up log from Warn to Header.
Test Plan: db_bench and observe the LOG header
Reviewers: igor, anthony, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D47067
Summary:
Unfortunately it is not easily possible to install gflags as a package on
Travis. Change the Travis script to download and build gflags. This patch
avoids "sudo make install" so that we can continue to use Travis'
container-based infrastructure.
Test Plan: Run tests on Travis.
Reviewers: sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D47037
Summary: This will unblock the corresponding change in MyRocks
Test Plan: ran rocksdb.write_sync test
Reviewers: sdong, kolmike
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D46911
Summary: Missed one file in the previous commit
Test Plan: compiles
Reviewers: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D47055
Summary: If we skip a test, we shouldn't mark `make check` as failure. This fixes travis CI test.
Test Plan: Travis CI
Reviewers: noetzli, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D47031
Summary:
Although compaction time is recorded in the statistics,
it is helpful to include this value in the log output corresponding
to the end of compaction.
Test Plan: make all && make check
Reviewers: yhchiang, sdong, igor, noetzli, MarkCallaghan
Reviewed By: MarkCallaghan
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D47007
Summary:
In case of huge db backup infromation about progress of downloading would help.
New callback parameter in CreateNewBackup() function will trigger whenever a some amount of data downloaded.
Task: 8057631
Test Plan:
ProgressCallbackDuringBackup test that cover new functionality added to BackupableDBTest tests.
other test succeed as well.
Reviewers: Guenena, benj, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D46575
Summary: This should let us pass tests on OS X.
Test Plan: none yet
Reviewers: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D46989
Summary:
RocksDB options can be dumped to the log file, and
up to this point the max_subcompactions option was not included
in this dump. This fixes that.
Test Plan: makek all && make check
Reviewers: MarkCallaghan, igor, noetzli, anthony, yhchiang, sdong
Reviewed By: yhchiang, sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D46971
Summary: There was a merge issue with SleepingBackgroundTask
Test Plan: compiles now
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D46977
Summary:
This patch finally fixes the ColumnFamilyTest.ReadDroppedColumnFamily test. The test has been failing very sporadically and it was hard to repro. However, I managed to write a new tests that reproes the failure deterministically.
Here's what happens:
1. We start the flush for the column family
2. We check if the column family was dropped here: a3fc49bfdd/db/flush_job.cc (L149)
3. This check goes through, ends up in InstallMemtableFlushResults() and it goes into LogAndApply()
4. At about this time, we start dropping the column family. Dropping the column family process gets to LogAndApply() at about the same time as LogAndApply() from flush process
5. Drop column family goes through LogAndApply() first, marking the column family as dropped.
6. Flush process gets woken up and gets a chance to write to the MANIFEST. However, this is where it gets stuck: a3fc49bfdd/db/version_set.cc (L1975)
7. We see that the column family was dropped, so there is no need to write to the MANIFEST. We return OK.
8. Flush gets OK back from LogAndApply() and it deletes the memtable, thinking that the data is now safely persisted to sst file.
The fix is pretty simple. Instead of OK, we return ShutdownInProgress. This is not really true, but we have been using this status code to also mean "this operation was canceled because the column family has been dropped".
The fix is only one LOC. All other code is related to tests. I added a new test that reproes the failure. I also moved SleepingBackgroundTask to util/testutil.h (because I needed it in column_family_test for my new test). There's plenty of other places where we reimplement SleepingBackgroundTask, but I'll address that in a separate commit.
Test Plan:
1. new test
2. make check
3. Make sure the ColumnFamilyTest.ReadDroppedColumnFamily doesn't fail on Travis: https://travis-ci.org/facebook/rocksdb/jobs/79952386
Reviewers: yhchiang, anthony, IslamAbdelRahman, kradhakrishnan, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D46773
Summary:
The default behavior for atomic operations is sequentially consistent ordering
which is not needed for simple counters (see:
http://en.cppreference.com/w/cpp/atomic/memory_order). Change the memory order
to std::memory_order_relaxed for better performance.
Test Plan: make clean all check
Reviewers: rven, anthony, yhchiang, aekmekji, sdong, MarkCallaghan, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D46953
Summary:
There are some use cases in MyRocks to compare two slices
and to return the first byte where they differ. It may be
useful to add it as a RocksDB Slice function.
Test Plan: db_test
Reviewers: sdong, rven, igor
Reviewed By: igor
Subscribers: jkedgar, dhruba
Differential Revision: https://reviews.facebook.net/D46935
Summary:
Releasing mutex between getting min_pending_output and scanning files may cause min_pending_output to be max but some non-final files are found in file scanning, ending up with deleting wrong files.
As a recent regression, mutex can be released while waiting for log sync. We move it to after file scanning.
Test Plan: Run all existing tests. Don't think it is easy to write a unit test. Maybe we should find a way to assert lock not released so that we can have some test verification for similar cases.
Reviewers: igor, anthony, IslamAbdelRahman, kradhakrishnan, yhchiang, kolmike, rven
Reviewed By: rven
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D46899
Summary: Add an option to stop writes if compaction lefts behind. If estimated pending compaction bytes is more than threshold specified by options.hard_pending_compaction_bytes_liimt, writes will stop until compactions are cleared to under the threshold.
Test Plan: Add unit test DBTest.HardLimit
Reviewers: rven, kradhakrishnan, anthony, IslamAbdelRahman, yhchiang, igor
Reviewed By: igor
Subscribers: MarkCallaghan, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D45999
Summary: Command level timeouts are not working. Moving it to step level.
Test Plan: Manual testing sending commands
Reviewers: sdong igor
CC: leveldb@
Task ID: #6968635
Blame Rev:
Summary:
Commit c67d206898 did not fix all test conditions
which use Arena::MemoryAllocatedBytes() (see Travis failure
https://travis-ci.org/facebook/rocksdb/jobs/79957700). The assumption of that
commit was that aligned allocations do not call Arena::AllocateNewBlock(), so
malloc_usable_block_size() would not be used for Arena::MemoryAllocatedBytes().
However, there is a code path where Arena::AllocateAligned() calls
AllocateFallback() which in turn calls Arena::AllocateNewBlock(), so
Arena::MemoryAllocatedBytes() may return a greater value than expected even for
aligned requests.
Test Plan: make arena_test && ./arena_test
Reviewers: rven, anthony, yhchiang, aekmekji, igor, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D46869
Summary:
Although there are currently counters to keep track of the
stall caused by having too many L0 files, there is no distinction as
to whether when that stall occurs either (A) L0-L1 compaction is taking
place to try and mitigate it, or (B) no L0-L1 compaction has been scheduled
at the moment. This diff adds a counter for (A) so that the nature of L0
stalls can be better understood.
Test Plan: make all && make check
Reviewers: sdong, igor, anthony, noetzli, yhchiang
Reviewed By: yhchiang
Subscribers: MarkCallaghan, dhruba
Differential Revision: https://reviews.facebook.net/D46749
Summary: Transaction::RollbackToSavePoint() will now release any locks that were taken since the previous SavePoint. To do this cleanly, I moved tracked_keys_ management into TransactionBase.
Test Plan: New Transaction test.
Reviewers: igor, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, spetrunia, leveldb
Differential Revision: https://reviews.facebook.net/D46761
Summary: Fixed
- Added timeouts for crash tests. They take around 9hrs.
- Added oncall so we can get notifications for timeout etc.
- Fixed a bug in the valgrind script
- Cosmetic fix
Test Plan: Manual run
Reviewers: sdong igor
CC: leveldb@
Task ID: #6968635
Blame Rev:
