Summary:
Previously with is_fifo=true we only evict TTL file. Changing it to also evict non-TTL files from oldest to newest, after exhausted TTL files.
Closes https://github.com/facebook/rocksdb/pull/4049
Differential Revision: D8604597
Pulled By: yiwu-arbug
fbshipit-source-id: bc4209ee27c1528ce4b72833e6f1e1bff80082c1
Summary:
Pass in `for_compaction` to `BlockBasedTableIterator` via `BlockBasedTableReader::NewIterator`.
In 7103559f49, `for_compaction` was set in `BlockBasedTable::Rep` via `BlockBasedTable::SetupForCompaction`. In hindsight it was not the right decision; it also caused TSAN to complain.
Closes https://github.com/facebook/rocksdb/pull/4048
Differential Revision: D8601056
Pulled By: sagar0
fbshipit-source-id: 30127e898c15c38c1080d57710b8c5a6d64a0ab3
Summary:
Enable readahead for blob DB garbage collection, which should improve GC performance a little bit.
Closes https://github.com/facebook/rocksdb/pull/3648
Differential Revision: D7383791
Pulled By: yiwu-arbug
fbshipit-source-id: 642b3327f7105eca85986d3fb2d8f960a3d83cf1
Summary:
Top-level index in partitioned index/filter blocks are small and could be pinned in memory. So far we use that by cache_index_and_filter_blocks to false. This however make it difficult to keep account of the total memory usage. This patch introduces pin_top_level_index_and_filter which in combination with cache_index_and_filter_blocks=true keeps the top-level index in cache and yet pinned them to avoid cache misses and also cache lookup overhead.
Closes https://github.com/facebook/rocksdb/pull/4037
Differential Revision: D8596218
Pulled By: maysamyabandeh
fbshipit-source-id: 3a5f7f9ca6b4b525b03ff6bd82354881ae974ad2
Summary:
For example calling CompactionFilter is always timed and gives the user no way to disable.
This PR will disable the timer if `Statistics::stats_level_` (which is part of DBOptions) is `kExceptDetailedTimers`
Closes https://github.com/facebook/rocksdb/pull/4029
Differential Revision: D8583670
Pulled By: miasantreble
fbshipit-source-id: 913be9fe433ae0c06e88193b59d41920a532307f
Summary:
- Attempt to clean the checkpoint staging directory before starting a checkpoint. It was already cleaned up at the end of checkpoint. But it wasn't cleaned up in the edge case where the process crashed while staging checkpoint files.
- Attempt to clean the checkpoint directory before calling `Checkpoint::Create` in `db_stress`. This handles the case where checkpoint directory was created by a previous `db_stress` run but the process crashed before cleaning it up.
- Use `DestroyDB` for cleaning checkpoint directory since a checkpoint is a DB.
Closes https://github.com/facebook/rocksdb/pull/4035
Reviewed By: yiwu-arbug
Differential Revision: D8580223
Pulled By: ajkr
fbshipit-source-id: 28c667400e249fad0fdedc664b349031b7b61599
Summary:
Moved the direct-IO assertion to the top in `PosixSequentialFile::PositionedRead`, as it doesn't make sense to check for sector alignments before checking for direct IO.
Closes https://github.com/facebook/rocksdb/pull/3891
Differential Revision: D8267972
Pulled By: sagar0
fbshipit-source-id: 0ecf77c0fb5c35747a4ddbc15e278918c0849af7
Summary:
-Wshorten-64-to-32 is invalid flag in fbcode. Changing it to -Warrowing.
Closes https://github.com/facebook/rocksdb/pull/4028
Differential Revision: D8553694
Pulled By: yiwu-arbug
fbshipit-source-id: 1523cbcb4c76cf1d2b10a4d28b5f58c78e6cb876
Summary:
This PR extends the improvements in #3282 to also work when using Direct IO.
We see **4.5X performance improvement** in seekrandom benchmark doing long range scans, when using direct reads, on flash.
**Description:**
This change improves the performance of iterators doing long range scans (e.g. big/full index or table scans in MyRocks) by using readahead and prefetching additional data on each disk IO, and storing in a local buffer. This prefetching is automatically enabled on noticing more than 2 IOs for the same table file during iteration. The readahead size starts with 8KB and is exponentially increased on each additional sequential IO, up to a max of 256 KB. This helps in cutting down the number of IOs needed to complete the range scan.
**Implementation Details:**
- Used `FilePrefetchBuffer` as the underlying buffer to store the readahead data. `FilePrefetchBuffer` can now take file_reader, readahead_size and max_readahead_size as input to the constructor, and automatically do readahead.
- `FilePrefetchBuffer::TryReadFromCache` can now call `FilePrefetchBuffer::Prefetch` if readahead is enabled.
- `AlignedBuffer` (which is the underlying store for `FilePrefetchBuffer`) now takes a few additional args in `AlignedBuffer::AllocateNewBuffer` to allow copying data from the old buffer.
- Made sure not to re-read partial chunks of data that were already available in the buffer, from device again.
- Fixed a couple of cases where `AlignedBuffer::cursize_` was not being properly kept up-to-date.
**Constraints:**
- Similar to #3282, this gets currently enabled only when ReadOptions.readahead_size = 0 (which is the default value).
- Since the prefetched data is stored in a temporary buffer allocated on heap, this could increase the memory usage if you have many iterators doing long range scans simultaneously.
- Enabled only for user reads, and disabled for compactions. Compaction reads are controlled by the options `use_direct_io_for_flush_and_compaction` and `compaction_readahead_size`, and the current feature takes precautions not to mess with them.
**Benchmarks:**
I used the same benchmark as used in #3282.
Data fill:
```
TEST_TMPDIR=/data/users/$USER/benchmarks/iter ./db_bench -benchmarks=fillrandom -num=1000000000 -compression_type="none" -level_compaction_dynamic_level_bytes
```
Do a long range scan: Seekrandom with large number of nexts
```
TEST_TMPDIR=/data/users/$USER/benchmarks/iter ./db_bench -benchmarks=seekrandom -use_direct_reads -duration=60 -num=1000000000 -use_existing_db -seek_nexts=10000 -statistics -histogram
```
```
Before:
seekrandom : 37939.906 micros/op 26 ops/sec; 29.2 MB/s (1636 of 1999 found)
With this change:
seekrandom : 8527.720 micros/op 117 ops/sec; 129.7 MB/s (6530 of 7999 found)
```
~4.5X perf improvement. Taken on an average of 3 runs.
Closes https://github.com/facebook/rocksdb/pull/3884
Differential Revision: D8082143
Pulled By: sagar0
fbshipit-source-id: 4d7a8561cbac03478663713df4d31ad2620253bb
Summary:
We potentially need this information for tracing, profiling and diagnosis.
Closes https://github.com/facebook/rocksdb/pull/4026
Differential Revision: D8555214
Pulled By: riversand963
fbshipit-source-id: 4263e06c00b6d5410b46aa46eb4e358ff2161dd2
Summary:
Once per `ingest_external_file_one_in` operations, uses SstFileWriter to create a file containing `ingest_external_file_width` consecutive keys. The file is named containing the thread ID to avoid clashes. The file is then added to the DB using `IngestExternalFile`.
We can't enable it by default in crash test because `nooverwritepercent` and `test_batches_snapshot` both must be zero for the DB's whole lifetime. Perhaps we should setup a separate test with that config as range deletion also requires it.
Closes https://github.com/facebook/rocksdb/pull/4018
Differential Revision: D8507698
Pulled By: ajkr
fbshipit-source-id: 1437ea26fd989349a9ce8b94117241c65e40f10f
Summary:
so they could be overriden
Closes https://github.com/facebook/rocksdb/pull/4025
Differential Revision: D8526287
Pulled By: siying
fbshipit-source-id: 9537b299dc907b4d1eeaf77a8784b13cb058280d
Summary:
https://github.com/facebook/rocksdb/pull/3764 introduced an optimization feature to skip duplicate prefix entires in full bloom filters. Unfortunately it also introduces a bug in partitioned full filters, where the duplicate prefix should still be inserted if it is in a new partition. The patch fixes the bug by resetting the duplicate detection logic each time a partition is cut.
This bug could result into false negatives, which means that DB could skip an existing key.
Closes https://github.com/facebook/rocksdb/pull/4024
Differential Revision: D8518866
Pulled By: maysamyabandeh
fbshipit-source-id: 044f4d988e606a330ecafd8c79daceb68b8796bf
Summary:
b555ed30a4 makes the BlockBasedTableIterator to be invalidated if the current position if over the upper bound. However, this can bring performance regression to the case of multiple Seek()s hitting the same data block but all out of upper bound.
For example, if an SST file has a data block containing following keys : {a, z}
The user sets the upper bound to be "x", and it executed following queries:
Seek("b")
Seek("c")
Seek("d")
Before the upper bound optimization, these queries always come to this same current data block of the iterator, but now inside each Seek() the data block is read from the block cache but is returned again.
To prevent this regression case, we keep the current data block iterator if it is upper bound.
Closes https://github.com/facebook/rocksdb/pull/4004
Differential Revision: D8463192
Pulled By: siying
fbshipit-source-id: 8710628b30acde7063a097c3184d6c4333a8ef81
Summary:
Add the `backup_one_in` and `checkpoint_one_in` options to periodically trigger backups and checkpoints. The directory names contain thread ID to avoid clashing with parallel backups/checkpoints. Enable checkpoint in crash test so our CI runs will use it. Didn't enable backup in crash test since it copies all the files which is too slow.
Closes https://github.com/facebook/rocksdb/pull/4005
Differential Revision: D8472275
Pulled By: ajkr
fbshipit-source-id: ff91bdc37caac4ffd97aea8df96b3983313ac1d5
Summary:
Fixed bug where `db_stress` output a line with a warning followed by a line with an error, and `db_crashtest.py` considered that a success. For example:
```
WARNING: prefix_size is non-zero but memtablerep != prefix_hash
open error: Corruption: SST file is ahead of WALs
```
Closes https://github.com/facebook/rocksdb/pull/4006
Differential Revision: D8473463
Pulled By: ajkr
fbshipit-source-id: 60461bdd7491d9d26c63f7d4ee522a0f88ba3de7
Summary:
`SetByteArrayRegion` does not have const source buffer thus compilation error. I have made that same as in other JNI files (const_cast). It was missing for new transaction functionality added recently.
Closes https://github.com/facebook/rocksdb/pull/4013
Differential Revision: D8493290
Pulled By: sagar0
fbshipit-source-id: 14afedf365b111121bd11e68a8d546a1cae68b26
Summary:
Adding support for zLinux on s390x architecture in JNI.
Closes https://github.com/facebook/rocksdb/pull/4009
Differential Revision: D8483750
Pulled By: siying
fbshipit-source-id: e681657c27e7a28f1731e08e8570382de5deff44
Summary:
The Block object assumes contents are uncompressed. Block's constructor tries to read the number of restarts, but does not get an accurate number when its contents are compressed, which is causing issues like https://github.com/facebook/rocksdb/issues/3843.
This PR address this issue by skipping reconstruction of restart points when blocks are known to be compressed. Somehow the restart points can be read directly when Snappy is used and some tests (for example https://github.com/facebook/rocksdb/blob/master/db/db_block_cache_test.cc#L196) expects blocks to be fully constructed even when Snappy compression is used, so here we keep the restart point logic for Snappy.
Closes https://github.com/facebook/rocksdb/pull/3996
Differential Revision: D8416186
Pulled By: miasantreble
fbshipit-source-id: 002c0b62b9e5d89fb7736563d354ce0023c8cb28
Summary:
Don't call the OnTableFileCreated listener callback when a 0 size SST
file gets created by Flush. Doing so causes an assertion failure in db_stress. It is also not correct behavior as we call env->DeleteFile() for such files right before the notification.
Closes https://github.com/facebook/rocksdb/pull/4003
Differential Revision: D8461385
Pulled By: anand1976
fbshipit-source-id: ae92d4f921c2e2cff981ad58f4929ed8b609f35d
Summary:
Add a new DB property to DB::GetProperty(), which returns the option.statistics. Test is updated to pass.
Closes https://github.com/facebook/rocksdb/pull/3966
Differential Revision: D8311139
Pulled By: zhichao-cao
fbshipit-source-id: ea78f4727358c807b0e5a0ea62e09defb10ad9ac
Summary:
Here are some fixes for build on Solaris Sparc.
It is also fixing CRC test on BigEndian platforms.
Closes https://github.com/facebook/rocksdb/pull/4000
Differential Revision: D8455394
Pulled By: ajkr
fbshipit-source-id: c9289a7b541a5628139c6b77e84368e14dc3d174
Summary:
Verify table will load SST into `TableCache`
it occupy memory & `TableCache`‘s capacity ...
but no logic use them
it's unnecessary ...
so , we verify them after all sub compact finished
Closes https://github.com/facebook/rocksdb/pull/3979
Differential Revision: D8389946
Pulled By: ajkr
fbshipit-source-id: 54bd4f474f9e7b3accf39c3068b1f36a27ec4c49
Summary:
Make sure that some recent releases can read master's option files while ignoring unknown options. Also add two more recent release branches.
Closes https://github.com/facebook/rocksdb/pull/3994
Differential Revision: D8409499
Pulled By: siying
fbshipit-source-id: 1b025f19ba288da0517f6b4572797573e23e23c2
Summary:
The SST file sizes changed slightly after the improvement of PR #3970
which reduces the size of the properties block. Before PR #3970 a size
ratio compaction included all of the first four flushed files but it
only includes two files after. We increase the size_ratio universal
compaction option to make that compaction include all four files again.
Closes https://github.com/facebook/rocksdb/pull/3995
Differential Revision: D8426925
Pulled By: fgwu
fbshipit-source-id: 1429c38672e9f4fb4d4881fd4b06db45c4861d62
Summary:
Rebased and resubmitting #1831 on behalf of stevelittle.
The problem is when a single process attempts to open the same DB twice, the second attempt fails due to LOCK file held. If the second attempt had opened the LOCK file, it'll now need to close it, and closing causes the file to be unlocked. Then, any subsequent attempt to open the DB will succeed, which is the wrong behavior.
The solution was to track which files a process has locked in PosixEnv, and check those before opening a LOCK file.
Fixes#1780.
Closes https://github.com/facebook/rocksdb/pull/3993
Differential Revision: D8398984
Pulled By: ajkr
fbshipit-source-id: 2755fe66950a0c9de63075f932f9e15768041918
Summary:
db_stress initialization randomly chooses a set of keys to not overwrite. It was doing it separately for each column family. That caused 30+ second initialization times for the non-simple crash tests, which have 10 CFs. This PR:
- reuses the same set of randomly chosen no-overwrite keys across all CFs
- logs a couple more timestamps so we can more easily see initialization time
Closes https://github.com/facebook/rocksdb/pull/3990
Differential Revision: D8393821
Pulled By: ajkr
fbshipit-source-id: d0b263a298df607285ffdd8b0983ff6575cc6c34
Summary:
In `db_stress` profile the vast majority of CPU time is spent acquiring the `SyncPoint` mutex. I mistakenly assumed #3939 had fixed this mutex contention problem by disabling `SyncPoint` processing. But actually the lock was still being acquired just to check whether processing is enabled. We can avoid that overhead by using an atomic to track whether it's enabled.
Closes https://github.com/facebook/rocksdb/pull/3991
Differential Revision: D8393825
Pulled By: ajkr
fbshipit-source-id: 5bc4e3c722ee7304e7a9c2439998c456b05a6897
Summary:
A recent change pushed down the upper bound checking to child iterators. However, this causes the logic of following sequence wrong:
Seek(key);
if (!Valid()) SeekToLast();
Because !Valid() may be caused by upper bounds, rather than the end of the iterator. In this case SeekToLast() points to totally wrong places. This can cause wrong results, infinite loops, or segfault in some cases.
This sequence is called when changing direction from forward to backward. And this by itself also implicitly happen during reseeking optimization in Prev().
Fix this bug by using SeekForPrev() rather than this sequuence, as what is already done in prefix extrator case.
Closes https://github.com/facebook/rocksdb/pull/3989
Differential Revision: D8385422
Pulled By: siying
fbshipit-source-id: 429e869990cfd2dc389421e0836fc496bed67bb4
Summary:
The sixth argument should be `key_includes_seq` bool, the seventh a `GetContext*`. We were mistakenly passing the `GetContext*` as the sixth argument and relying on the default (nullptr) for the seventh. This would make statistics inaccurate, at least.
Blame: 402b7aa0
Closes https://github.com/facebook/rocksdb/pull/3974
Differential Revision: D8344907
Pulled By: ajkr
fbshipit-source-id: 3ad865a0541d6d30f75dfc726352788118cfe12e
Summary:
Fix a crash in `WinEnvIO::GetSectorSize` that happens on old Windows systems (e.g Windows 7).
On old Windows systems that don't support querying StorageAccessAlignmentProperty using IOCTL_STORAGE_QUERY_PROPERTY, the flow calls a different DeviceIoControl with nullptr as lpBytesReturned.
When the code reaches this point, we get an access violation.
Closes https://github.com/facebook/rocksdb/pull/3975
Differential Revision: D8385186
Pulled By: ajkr
fbshipit-source-id: fae4c9b4b0a52c8a10182e1b35bcaa30dc393bbb
Summary:
Property block will be read sequentially and cached in a heap located
object, so there's no need for restart points. Thus we set the restart
interval to infinity to save space.
Closes https://github.com/facebook/rocksdb/pull/3970
Differential Revision: D8332586
Pulled By: fgwu
fbshipit-source-id: 899c3267832a81d0f084ec2db6b387332f461134
Summary:
BadOptions test creates a temporary db path changed to
table_block_based_bad_options_test to avoid collide with that created by
the PrefixAndWholeKeyTest
Closes https://github.com/facebook/rocksdb/pull/3965
Differential Revision: D8316080
Pulled By: fgwu
fbshipit-source-id: bb8e0fdfdb9abf0e5ce94494b4388cd1622ee032
Summary:
Fixed the fprintf format of uint64_t by using PRIu64 in file tools/ldb_cmd.cc
Closes https://github.com/facebook/rocksdb/pull/3963
Differential Revision: D8306179
Pulled By: zhichao-cao
fbshipit-source-id: 597dcd55321576801bbf2cf4714736ebc4750a0c
Summary:
We use `db_stress.cc` intensively to test and verify the behavior of RocksDB. Sometimes we need to add new tests for recently added features. Original `StressTest` class provides many general functionality that can be leveraged by other tests. Therefore, in this refactoring PR, I try to identify the general operations as well as operations that future tests most likely want to customize. Future tests can inherit `StressTest` and overriding the virtual functions to test custom logic.
Closes https://github.com/facebook/rocksdb/pull/3902
Differential Revision: D8284607
Pulled By: riversand963
fbshipit-source-id: 019302d04665a2b18334b6d05d04a477168c8ea4
Summary:
Depending on the compression type, `CompressBlock` calls the compress method for each compression type. It calls ZSTD_Compress for both kZSTD and kZSTDNotFinalCompression (https://github.com/facebook/rocksdb/blob/master/table/block_based_table_builder.cc#L169).
However currently ZSTD_Compress only expects the type to be kZSTD and this is causing assert failures and crashes. The same also applies to ZSTD_Uncompress.
Closes https://github.com/facebook/rocksdb/pull/3964
Differential Revision: D8308715
Pulled By: miasantreble
fbshipit-source-id: e5125f53edb829c9c33733167bec74e4793d0782
Summary:
format_version 3 changes the format of index blocks by storing user keys instead of the internal keys, which saves 8-bytes per key. This patch extends the format to top-level indexes in partitioned index/filters.
Closes https://github.com/facebook/rocksdb/pull/3958
Differential Revision: D8294615
Pulled By: maysamyabandeh
fbshipit-source-id: 17666cc16b8076c363972e2308e31547e835f0fe
Summary:
This adds some rules in the tools/advisor/advisor/rules.ini (refer this for more information) file and corresponding python parser scripts for parsing the rules file and the rocksdb LOG and OPTIONS files. This is WIP for adding rules depending on ODS. The starting point of the script is the rocksdb/tools/advisor/advisor/rule_parser.py file.
Closes https://github.com/facebook/rocksdb/pull/3934
Reviewed By: maysamyabandeh
Differential Revision: D8304059
Pulled By: poojam23
fbshipit-source-id: 47f2a50f04d46d40e225dd1cbf58ba490f79e239
Summary:
CompactFiles checked whether the existing files conflicted with the chosen compaction. But it missed checking whether future files would conflict, i.e., when another compaction was simultaneously writing new files to the same range at the same output level.
Closes https://github.com/facebook/rocksdb/pull/3926
Differential Revision: D8218996
Pulled By: ajkr
fbshipit-source-id: 21cb00a6fed4c8c62d3ed2ff810962e6bdc2fdfb
