Summary:
DBTest2.AutoPrefixMode1 doesn't pass because auto prefix mode is not supported there.
Fix it by disabling the test.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6346
Test Plan: Run DBTest2.AutoPrefixMode1 in lite mode
Differential Revision: D19627486
fbshipit-source-id: fbde75260aeecb7e6fc406e09c19a71a95aa5f08
Summary:
Difficult to root cause crash test failures without archiving
db dir. Now all crash test configurations should save the db dir.
Also exit with error code on bad command.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6344
Test Plan:
Hmm, how about this:
for TARGET in stress_crash asan_crash ubsan_crash tsan_crash; do EMAIL=email ONCALL=oncall TRIGGER=all SUBSCRIBER=sub build_tools/rocksdb-lego-determinator $TARGET > tmp && node -c tmp && grep -q Upload tmp || echo Bad; done
Differential Revision: D19625605
Pulled By: pdillinger
fbshipit-source-id: cb84aa93ee80b4534f4c61b90f0e0f99a41155d5
Summary:
db_bloom_filter_test break with clang LITE build with following message:
db/db_bloom_filter_test.cc:23:29: error: unused variable 'kPlainTable' [-Werror,-Wunused-const-variable]
static constexpr PseudoMode kPlainTable = -1;
^
Fix it by moving the declaration out of LITE build
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6340
Test Plan:
USE_CLANG=1 LITE=1 make db_bloom_filter_test
and without LITE=1
Differential Revision: D19609834
fbshipit-source-id: 0e88f5c6759238a94f9880d84c785ac18e7cdd7e
Summary:
In WritePrepared there could be gap in sequence numbers. This breaks the trick we use in kPointInTimeRecovery which assume the first seq in the log right after the corrupted log is one larger than the last seq we read from the logs. To let this trick keep working, we add a dummy entry with the expected sequence to the first log right after recovery.
Also in WriteCommitted, if the log right after the corrupted log is empty, since it has no sequence number to let the sequential trick work, it is assumed as unexpected behavior. This is however expected to happen if we close the db after recovering from a corruption and before writing anything new to it. To remedy that, we apply the same technique by writing a dummy entry to the log that is created after the corrupted log.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6313
Differential Revision: D19458291
Pulled By: maysamyabandeh
fbshipit-source-id: 09bc49e574690085df45b034ca863ff315937e2d
Summary:
Both changes are related to RocksJava:
1. Allow dependencies that are already present on the host system due to Maven to be reused in Docker builds.
2. Extend the `make clean-not-downloaded` target to RocksJava, so that libraries needed as dependencies for the test suite are not deleted and re-downloaded unnecessarily.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6318
Differential Revision: D19608742
Pulled By: pdillinger
fbshipit-source-id: 25e25649e3e3212b537ac4512b40e2e53dc02ae7
Summary:
Add a new option ReadOptions.auto_prefix_mode. When set to true, iterator should return the same result as total order seek, but may choose to do prefix seek internally, based on iterator upper bounds. Also fix two previous bugs when handling prefix extrator changes: (1) reverse iterator should not rely on upper bound to determine prefix. Fix it with skipping prefix check. (2) block-based filter is not handled properly.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6314
Test Plan: (1) add a unit test; (2) add the check to stress test and run see whether it can pass at least one run.
Differential Revision: D19458717
fbshipit-source-id: 51c1bcc5cdd826c2469af201979a39600e779bce
Summary:
./db_compaction_test DBCompactionTest.LevelTtlCascadingCompactions passed 96 / 100 times.
```
With the fix: all runs (tried 100, 1000, 10000) succeed.
```
$ TEST_TMPDIR=/dev/shm ~/gtest-parallel/gtest-parallel ./db_compaction_test --gtest_filter=DBCompactionTest.LevelTtlCascadingCompactions --repeat=1000
[1000/1000] DBCompactionTest.LevelTtlCascadingCompactions (1895 ms)
```
Test Plan:
Build:
```
COMPILE_WITH_TSAN=1 make db_compaction_test -j100
```
Without the fix: a few runs out of 100 fail:
```
$ TEST_TMPDIR=/dev/shm KEEP_DB=1 ~/gtest-parallel/gtest-parallel ./db_compaction_test --gtest_filter=DBCompactionTest.LevelTtlCascadingCompactions --repeat=100
...
...
Note: Google Test filter = DBCompactionTest.LevelTtlCascadingCompactions
[==========] Running 1 test from 1 test case.
[----------] Global test environment set-up.
[----------] 1 test from DBCompactionTest
[ RUN ] DBCompactionTest.LevelTtlCascadingCompactions
db/db_compaction_test.cc:3687: Failure
Expected equality of these values:
oldest_time
Which is: 1580155869
level_to_files[6][0].oldest_ancester_time
Which is: 1580155870
DB is still at /dev/shm//db_compaction_test_6337001442947696266
[ FAILED ] DBCompactionTest.LevelTtlCascadingCompactions (1432 ms)
[----------] 1 test from DBCompactionTest (1432 ms total)
[----------] Global test environment tear-down
[==========] 1 test from 1 test case ran. (1433 ms total)
[ PASSED ] 0 tests.
[ FAILED ] 1 test, listed below:
[ FAILED ] DBCompactionTest.LevelTtlCascadingCompactions
1 FAILED TEST
[80/100] DBCompactionTest.LevelTtlCascadingCompactions returned/aborted with exit code 1 (1489 ms)
[100/100] DBCompactionTest.LevelTtlCascadingCompactions (1522 ms)
FAILED TESTS (4/100):
1419 ms: ./db_compaction_test DBCompactionTest.LevelTtlCascadingCompactions (try https://github.com/facebook/rocksdb/issues/90)
1434 ms: ./db_compaction_test DBCompactionTest.LevelTtlCascadingCompactions (try https://github.com/facebook/rocksdb/issues/84)
1457 ms: ./db_compaction_test DBCompactionTest.LevelTtlCascadingCompactions (try https://github.com/facebook/rocksdb/issues/82)
1489 ms: ./db_compaction_test DBCompactionTest.LevelTtlCascadingCompactions (try https://github.com/facebook/rocksdb/issues/74)
Differential Revision: D19587040
Pulled By: sagar0
fbshipit-source-id: 11191ae9940837643bff47ebe18b299b4be3d950
Summary:
Commits related to hash index fix have been reverted in 6.7.fb branch. Update HISTORY.md to keep it in sync.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6337
Differential Revision: D19593717
fbshipit-source-id: 466178dc6205c9e41ccced41bf281a0952bdc2ca
Summary:
It chooses the oldest memtable, not the largest one. This is an
important difference for users whose CFs receive non-uniform write
rates.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6335
Differential Revision: D19588865
Pulled By: maysamyabandeh
fbshipit-source-id: 62ad4325b0182f5f27858584cd73fd5978fb2cec
Summary:
https://github.com/facebook/rocksdb/pull/6028 introduces a bug for hash index in SST files. If a table reader is created when total order seek is used, prefix_extractor might be passed into table reader as null. While later when prefix seek is used, the same table reader used, hash index is checked but prefix extractor is null and the program would crash.
Fix the issue by fixing http://github.com/facebook/rocksdb/pull/6028 in the way that prefix_extractor is preserved but ReadOptions.total_order_seek is checked
Also, a null pointer check is added so that a bug like this won't cause segfault in the future.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6328
Test Plan: Add a unit test that would fail without the fix. Stress test that reproduces the crash would pass.
Differential Revision: D19586751
fbshipit-source-id: 8de77690167ddf5a77a01e167cf89430b1bfba42
Summary:
Remove the redundant PartitionedFilterBlockBuilder::num_added_ and ::NumAdded since the parent class, FullFilterBlockBuilder, already provides them.
Also rename filters_in_partition_ and filters_per_partition_ to keys_added_to_partition_ and keys_per_partition_ to improve readability.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6299
Test Plan: make check
Differential Revision: D19413278
Pulled By: pdillinger
fbshipit-source-id: 04926ee7874477d659cb2b6ae03f2d995fb747e5
Summary:
Adjusted history for 6.6.1 and 6.6.2, switched master version to 6.7.0.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6320
Differential Revision: D19499272
Pulled By: gfosco
fbshipit-source-id: 2bafb2456951f231e411e9c03aaa4c044f497684
Summary:
The function was left unimplemented. Although we currently don't have a use for that it was declared with an assert(0) to prevent mistakenly using the remove_prefix of the parent class. The function body with only assert(0) however causes issues with some compiler's warning levels. The patch implements the function to avoid the warning.
It also piggybacks some minor code warning for unnecessary semicolons after the function definition.s
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6330
Differential Revision: D19559062
Pulled By: maysamyabandeh
fbshipit-source-id: 3a022484f688c9abd4556e5412bcc2628ab96a00
Summary:
The earlier code used two conflicting definitions for the number of
input records going into a compaction, one based on the
`rocksdb.num.entries` table property and one based on
`CompactionIterationStats`. The first one is correct and in line
with how output records are counted, while the second one incorrectly
ignores input records in various cases when the `CompactionIterator`
advances or reseeks the input iterator (this can happen, amongst other
cases, when dealing with `SingleDelete`s, regular `Delete`s, `Merge`s,
and compaction filters). This can result in the code undercounting the
input records and computing an incorrect value for "records dropped"
during the compaction. The patch fixes this by switching over to the
correct (table property based) input record count for "records dropped".
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6325
Test Plan: Tested using `make check` and `db_bench`.
Differential Revision: D19525491
Pulled By: ltamasi
fbshipit-source-id: 4340b0b2f41546db8e356db70ca02199e48fa636
Summary:
When there is a write stall, the active write group leader calls ```BeginWriteStall()``` to walk the queue of writers and remove any with the ```no_slowdown``` option set. There was a bug in the code which updated the back pointer but not the forward pointer (```link_newer```), corrupting the list and causing some threads to wait forever. This PR fixes it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6322
Test Plan: Add a unit test in db_write_test
Differential Revision: D19538313
Pulled By: anand1976
fbshipit-source-id: 6fbed819e594913f435886606f5d36f74f235c3a
Summary:
This reverts commit 8e309b35bb.
The stress tests are failing . Revert it until we figure the root cause.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6327
Differential Revision: D19537657
Pulled By: maysamyabandeh
fbshipit-source-id: bf34a5dd720825957729e136e9a5a729a240e61a
Summary:
kHashSearch is incompatible with larger than 1 values for index_block_restart_interval. Setting it to 1 in stress tests would avoid confusion about the test parameters.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6324
Differential Revision: D19525669
Pulled By: maysamyabandeh
fbshipit-source-id: fbf3a797e0ebcebb4d32eba3728cf3583906fc8a
Summary:
This is a simple edit to have two #include file paths be consistent within range_del_aggregator.{h,cc} with everywhere else.
The impact of this inconsistency is that it actual breaks a Bazel based build on the Windows platform. The same pragma once failure occurs with both Windows Visual C++ 2019 and clang for Windows 9.0. Bazel's "sandboxing" of the builds causes both compilers to not properly recognize "rocksdb/types.h" and "include/rocksdb/types.h" to be the same file (also comparator.h). My guess is that the backslash versus forward slash mixing within path names is the underlying issue.
But, everything builds fine once the include paths in these two source files are consistent with the rest of the repository.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6321
Differential Revision: D19506585
Pulled By: ltamasi
fbshipit-source-id: 294c346607edc433ab99eaabc9c880ee7426817a
Summary:
Currently, this test case tries to infer whether
`VersionStorageInfo::UpdateAccumulatedStats` was called during open by
checking the number of files opened against an arbitrary threshold (10).
This makes the test brittle and results in sporadic failures. The patch
changes the test case to use sync points to directly test whether
`UpdateAccumulatedStats` was called.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6306
Test Plan: `make check`
Differential Revision: D19439544
Pulled By: ltamasi
fbshipit-source-id: ceb7adf578222636a0f51740872d0278cd1a914f
Summary:
Block-based table has index has been disabled in crash test due to bugs. We fixed a bug and re-enable it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6310
Test Plan: Finish one round of "crash_test_with_atomic_flush" test successfully while exclusively running has index. Another run also ran for several hours without failure.
Differential Revision: D19455856
fbshipit-source-id: 1192752d2c1e81ed7e5c5c7a9481c841582d5274
Summary:
With many millions of keys, the old Bloom filter implementation
for the block-based table (format_version <= 4) would have excessive FP
rate due to the limitations of feeding the Bloom filter with a 32-bit hash.
This change computes an estimated inflated FP rate due to this effect
and warns in the log whenever an SST filter is constructed (almost
certainly a "full" not "partitioned" filter) that exceeds 1.5x FP rate
due to this effect. The detailed condition is only checked if 3 million
keys or more have been added to a filter, as this should be a lower
bound for common bits/key settings (< 20).
Recommended remedies include smaller SST file size, using
format_version >= 5 (for new Bloom filter), or using partitioned
filters.
This does not change behavior other than generating warnings for some
constructed filters using the old implementation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6317
Test Plan:
Example with warning, 15M keys @ 15 bits / key: (working_mem_size_mb is just to stop after building one filter if it's large)
$ ./filter_bench -quick -impl=0 -working_mem_size_mb=1 -bits_per_key=15 -average_keys_per_filter=15000000 2>&1 | grep 'FP rate'
[WARN] [/block_based/filter_policy.cc:292] Using legacy SST/BBT Bloom filter with excessive key count (15.0M @ 15bpk), causing estimated 1.8x higher filter FP rate. Consider using new Bloom with format_version>=5, smaller SST file size, or partitioned filters.
Predicted FP rate %: 0.766702
Average FP rate %: 0.66846
Example without warning (150K keys):
$ ./filter_bench -quick -impl=0 -working_mem_size_mb=1 -bits_per_key=15 -average_keys_per_filter=150000 2>&1 | grep 'FP rate'
Predicted FP rate %: 0.422857
Average FP rate %: 0.379301
$
With more samples at 15 bits/key:
150K keys -> no warning; actual: 0.379% FP rate (baseline)
1M keys -> no warning; actual: 0.396% FP rate, 1.045x
9M keys -> no warning; actual: 0.563% FP rate, 1.485x
10M keys -> warning (1.5x); actual: 0.564% FP rate, 1.488x
15M keys -> warning (1.8x); actual: 0.668% FP rate, 1.76x
25M keys -> warning (2.4x); actual: 0.880% FP rate, 2.32x
At 10 bits/key:
150K keys -> no warning; actual: 1.17% FP rate (baseline)
1M keys -> no warning; actual: 1.16% FP rate
10M keys -> no warning; actual: 1.32% FP rate, 1.13x
25M keys -> no warning; actual: 1.63% FP rate, 1.39x
35M keys -> warning (1.6x); actual: 1.81% FP rate, 1.55x
At 5 bits/key:
150K keys -> no warning; actual: 9.32% FP rate (baseline)
25M keys -> no warning; actual: 9.62% FP rate, 1.03x
200M keys -> no warning; actual: 12.2% FP rate, 1.31x
250M keys -> warning (1.5x); actual: 12.8% FP rate, 1.37x
300M keys -> warning (1.6x); actual: 13.4% FP rate, 1.43x
The reason for the modest inaccuracy at low bits/key is that the assumption of independence between a collision between 32-hash values feeding the filter and an FP in the filter is not quite true for implementations using "simple" logic to compute indices from the stock hash result. There's math on this in my dissertation, but I don't think it's worth the effort just for these extreme cases (> 100 million keys and low-ish bits/key).
Differential Revision: D19471715
Pulled By: pdillinger
fbshipit-source-id: f80c96893a09bf1152630ff0b964e5cdd7e35c68
Summary:
Help users that would benefit most from new Bloom filter
implementation by logging a warning that recommends the using
format_version >= 5.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6312
Test Plan:
$ (for BPK in 10 13 14 19 20 50; do ./filter_bench -quick -impl=0 -bits_per_key=$BPK -m_queries=1 2>&1; done) | grep 'its/key'
Bits/key actual: 10.0647
Bits/key actual: 13.0593
[WARN] [/block_based/filter_policy.cc:546] Using legacy Bloom filter with high (14) bits/key. Significant filter space and/or accuracy improvement is available with format_verion>=5.
Bits/key actual: 14.0581
[WARN] [/block_based/filter_policy.cc:546] Using legacy Bloom filter with high (19) bits/key. Significant filter space and/or accuracy improvement is available with format_verion>=5.
Bits/key actual: 19.0542
[WARN] [/block_based/filter_policy.cc:546] Using legacy Bloom filter with high (20) bits/key. Dramatic filter space and/or accuracy improvement is available with format_verion>=5.
Bits/key actual: 20.0584
[WARN] [/block_based/filter_policy.cc:546] Using legacy Bloom filter with high (50) bits/key. Dramatic filter space and/or accuracy improvement is available with format_verion>=5.
Bits/key actual: 50.0577
Differential Revision: D19457191
Pulled By: pdillinger
fbshipit-source-id: 073d94cde5c70e03a160f953e1100c15ea83eda4
Summary:
When we do concurrently writes, and different write operations will have WAL enable or disable.
But the data from write operation with WAL disabled will still be logged into log files, which will lead to extra disk write/sync since we do not want any guarantee for these part of data.
Detail can be found in https://github.com/facebook/rocksdb/issues/6280. This PR avoid mixing the two types in a write group. The advantage is simpler reasoning about the write group content
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6290
Differential Revision: D19448598
Pulled By: maysamyabandeh
fbshipit-source-id: 3d990a0f79a78ea1bfc90773f6ebafc1884c20de
Summary:
This PR adds a `rocksdb_options_set_atomic_flush` function to the C API.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6307
Differential Revision: D19451313
Pulled By: ltamasi
fbshipit-source-id: 750495642ef55b1ea7e13477f85c38cd6574849c
Summary:
A previous change meant to make db_stress to run on sync=1 mode for 1/20 of the time in crash_test, but a bug caused to to always run on sync=1 mode. Fix it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6304
Test Plan: Start and kill "python -u tools/db_crashtest.py --simple whitebox" multiple times and observe that most times sync=0 is used while some times sync=1 is used.
Differential Revision: D19433000
fbshipit-source-id: 7a0adba39b17a1b3acbbd791bb0cdb743b91fa95
Summary:
Recent bug fix related to hash index introduced a new bug: hash index can return NotFound but it is not handled by BlockBasedTable::Get(). The end result is that Get() stops being executed too early. Fix it by ignoring NotFound code in Get().
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6305
Test Plan: A problematic DB used to return NotFound incorrectly, and now able to return correct result. Will try to construct a unit test too.0
Differential Revision: D19438925
fbshipit-source-id: e751afa8c13728d56511cfeb1bc811ecb99f3217
Summary:
https://github.com/facebook/rocksdb/pull/2205 introduced a new
configuration option called `max_background_jobs`, superseding the
earlier options `max_background_flushes` and
`max_background_compactions`. However, unlike
`max_background_compactions`, setting `max_background_jobs` dynamically
through the `SetDBOptions` interface does not adjust the size of the
thread pools (see https://github.com/facebook/rocksdb/issues/6298). The
patch fixes this.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6300
Test Plan: Extended unit test.
Differential Revision: D19430899
Pulled By: ltamasi
fbshipit-source-id: 704006605b3c13c3d1b997ccc0831ee369721074
Summary:
Add asserts to show the intentions of result explicitly.
Add examples to show the effect of optimistic transaction more clearly.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6074
Test Plan: `cd examples && make optimistic_transaction_example && ./optimistic_transaction_example`
Differential Revision: D18964309
Pulled By: cheng-chang
fbshipit-source-id: a524616ed9981edf2fd37ae61c5ed18c5cf25f55
Summary:
Recent fix to Prefix Hash https://github.com/facebook/rocksdb/pull/6292 caused a bug that the newly created NotFound status in hash index is never reset. This causes reseek or implict reseek to return wrong results sometimes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6302
Test Plan:
Add a unit test that would fail. Not fix.
crash test with hash test would fail in several seconds. With the fix, it will run about several minutes before failing with another failure.
Differential Revision: D19424572
fbshipit-source-id: c5276f36a95fd0e2837e30190476d2fe21ed8566
Summary:
As of 1/15/2020, Maven Central does not support plain HTTP. Because of
this, our Travis and AppVeyor builds have started failing during the
assertj download step. This patch will hopefully fix these issues.
See https://blog.sonatype.com/central-repository-moving-to-https
for more info.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6301
Test Plan:
Will monitor the builds. ("I don't always test my changes but when I do,
I do it in production.")
Differential Revision: D19422923
Pulled By: ltamasi
fbshipit-source-id: 76f9a8564a5b66ddc721d705f9cbfc736bf7a97d
Summary:
When prefix is enabled the expected behavior when the prefix of the target does not exist is for Seek is to seek to any key larger than target and SeekToPrev to any key less than the target.
Currently. the prefix index (kHashSearch) returns OK status but sets Invalid() to indicate two cases: a prefix of the searched key does not exist, ii) the key is beyond the range of the keys in SST file. The SeekForPrev implementation in BlockBasedTable thus does not have enough information to know when it should set the index key to first (to return a key smaller than target). The patch fixes that by returning NotFound status for cases that the prefix does not exist. SeekForPrev in BlockBasedTable accordingly SeekToFirst instead of SeekToLast on the index iterator.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6297
Test Plan: SeekForPrev of non-exsiting prefix is added to block_test.cc, and a test case is added in db_test2, which fails without the fix.
Differential Revision: D19404695
fbshipit-source-id: cafbbf95f8f60ff9ede9ccc99d25bfa1cf6fcdc3
Summary:
In addition to removing the earlier partially implemented garbage collection
logic from the BlobDB codebase, the patch also removes the test cases (as well as
the related sync points, as appropriate) that were only relevant for the old
implementation, and reworks the remaining ones so they use the new GC logic.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6278
Test Plan: `make check`
Differential Revision: D19335226
Pulled By: ltamasi
fbshipit-source-id: 0cc1794bc9892feda1426ed5522a318f3cb1b692
Summary:
A recent commit adds a unit test that uses a function not available in LITE build. Fix it by avoiding the call
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6295
Test Plan: Run the test in LITE build and see it passes.
Differential Revision: D19395678
fbshipit-source-id: 37b42835bae02511630d80f7cafb1179401bc033
Summary:
kHashSearch index type is incompatible with index_block_restart_interval larger than 1. The patch asserts that and also resets index_block_restart_interval value if it is incompatible with kHashSearch.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6294
Differential Revision: D19394229
Pulled By: maysamyabandeh
fbshipit-source-id: 8a12712ab25e81094a7f71ecd43f773dd4fb6acd
Summary:
The fractional cascading index is not correctly generated when two files at the same level contains the same smallest or largest user key.
The result would be that it would hit an assertion in debug mode and lower level files might be skipped.
This might cause wrong results when the same user keys are of merge operands and Get() is called using the exact user key. In that case, the lower files would need to further checked.
The fix is to fix the fractional cascading index.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6285
Test Plan: Add a unit test which would cause the assertion which would be fixed.
Differential Revision: D19358426
fbshipit-source-id: 39b2b1558075fd95e99491d462a67f9f2298c48e
Summary:
This makes it easier to call the functions from Rust as otherwise they require mutable types.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6283
Differential Revision: D19349991
Pulled By: wqfish
fbshipit-source-id: e8da7a75efe8cd97757baef8ca844a054f2519b4
Summary:
Look at all compaction input files to compute the oldest ancestor time.
In https://github.com/facebook/rocksdb/issues/5992 we changed how creation_time (aka oldest-ancestor-time) table property of compaction output files is computed from max(creation-time-of-all-compaction-inputs) to min(creation-time-of-all-inputs). This exposed a bug where, during compaction, the creation_time:s of only the L0 compaction inputs were being looked at, and all other input levels were being ignored. This PR fixes the issue.
Some TTL compactions when using Level-Style compactions might not have run due to this bug.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6279
Test Plan: Enhanced the unit tests to validate that the correct time is propagated to the compaction outputs.
Differential Revision: D19337812
Pulled By: sagar0
fbshipit-source-id: edf8a72f11e405e93032ff5f45590816debe0bb4
Summary:
unordered_write is incompatible with non-zero max_successive_merges. Although we check this at runtime, we currently don't prevent the user from setting this combination in options. This has led to stress tests to fail with this combination is tried in ::SetOptions.
The patch fixes that and also reverts the changes performed by https://github.com/facebook/rocksdb/pull/6254, in which max_successive_merges was mistakenly declared incompatible with unordered_write.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6284
Differential Revision: D19356115
Pulled By: maysamyabandeh
fbshipit-source-id: f06dadec777622bd75f267361c022735cf8cecb6
Summary:
Fix compilation under LITE by putting `#ifndef ROCKSDB_LITE` around a code block.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6277
Differential Revision: D19334157
Pulled By: riversand963
fbshipit-source-id: 947111ed68aa550f5ea424b216c1442a8af9e32b
Summary:
Some shadow warning shows up when using gcc 4.8. An example:
./utilities/blob_db/blob_compaction_filter.h: In constructor ‘rocksdb::blob_db::BlobIndexCompactionFilterFactoryBase::BlobIndexCompactionFilterFactoryBase(rocksdb::blob_db::lobDBImpl*, rocksdb::Env*, rocksdb::Statistics*)’:
./utilities/blob_db/blob_compaction_filter.h:121:7: error: declaration of ‘blob_db_impl’ shadows a member of 'this' [-Werror=shadow]
: blob_db_impl_(blob_db_impl), env_(_env), statistics_(_statistics) {}
^
Fix them.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6242
Test Plan: Build and see the warnings go away.
Differential Revision: D19217789
fbshipit-source-id: 8ef631941f23dab47a388e060adec24b72efd65e
Summary:
Right now, when validating prefix iterator, if control iterator is invalidate but prefix iterator shows value, we determine it as a test failure. However, this fails to consider the case where a file or memtable containing a tombstone is filtered out by a prefix bloom filter. The fix is to relax the check in this case. If we are out of prefix range, then ignore the check.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6269
Test Plan: Run crash_test for a short while and it still passes.
Differential Revision: D19317594
fbshipit-source-id: b964a1cdc1df5efe439d4b32f8023e1fbc8598c1
Summary:
The crash test is failing with non-ok status after TransactionDB::Open. This patch adds more debugging information.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6272
Differential Revision: D19314527
Pulled By: maysamyabandeh
fbshipit-source-id: d45ecb0f2144e052fb4b5fdd483150440991a3b4
Summary:
This is the start of some JMH microbenchmarks for RocksJava.
Such benchmarks can help us decide on performance improvements of the Java API.
At the moment, I have only added benchmarks for various Comparator options, as that is one of the first areas where I want to improve performance. I plan to expand this to many more tests.
Details of how to compile and run the benchmarks are in the `README.md`.
A run of these on a XEON 3.5 GHz 4vCPU (QEMU Virtual CPU version 2.5+) / 8GB RAM KVM with Ubuntu 18.04, OpenJDK 1.8.0_232, and gcc 8.3.0 produced the following:
```
# Run complete. Total time: 01:43:17
REMEMBER: The numbers below are just data. To gain reusable insights, you need to follow up on
why the numbers are the way they are. Use profilers (see -prof, -lprof), design factorial
experiments, perform baseline and negative tests that provide experimental control, make sure
the benchmarking environment is safe on JVM/OS/HW level, ask for reviews from the domain experts.
Do not assume the numbers tell you what you want them to tell.
Benchmark (comparatorName) Mode Cnt Score Error Units
ComparatorBenchmarks.put native_bytewise thrpt 25 122373.920 ± 2200.538 ops/s
ComparatorBenchmarks.put java_bytewise_adaptive_mutex thrpt 25 17388.201 ± 1444.006 ops/s
ComparatorBenchmarks.put java_bytewise_non-adaptive_mutex thrpt 25 16887.150 ± 1632.204 ops/s
ComparatorBenchmarks.put java_direct_bytewise_adaptive_mutex thrpt 25 15644.572 ± 1791.189 ops/s
ComparatorBenchmarks.put java_direct_bytewise_non-adaptive_mutex thrpt 25 14869.601 ± 2252.135 ops/s
ComparatorBenchmarks.put native_reverse_bytewise thrpt 25 116528.735 ± 4168.797 ops/s
ComparatorBenchmarks.put java_reverse_bytewise_adaptive_mutex thrpt 25 10651.975 ± 545.998 ops/s
ComparatorBenchmarks.put java_reverse_bytewise_non-adaptive_mutex thrpt 25 10514.224 ± 930.069 ops/s
```
Indicating a ~7x difference between comparators implemented natively (C++) and those implemented in Java. Let's see if we can't improve on that in the near future...
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6241
Differential Revision: D19290410
Pulled By: pdillinger
fbshipit-source-id: 25d44bf3a31de265502ed0c5d8a28cf4c7cb9c0b
Summary:
WritePreparedTxnDB calls CancelAllBackgroundWork in its destructor to avoid dangling references to it from background job's SnapshotChecker callback. However, if the DBImpl is already closed, the info log might be closed with it, which causes memory leak when CancelAllBackgroundWork tries to print to the info log. The patch fixes that by calling CancelAllBackgroundWork only if the db is not closed already.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6268
Differential Revision: D19303439
Pulled By: maysamyabandeh
fbshipit-source-id: 4228a6be7e78d43c90630347baa89b008200bd15
Summary:
This is a continuation of https://github.com/facebook/rocksdb/pull/5320/files
I open a new mr for these purposes, half a year has past since the old mr is posted so it's almost impossible to fulfill some points below on the old mr, especially 5)
1) add validation modes for optimistic txns
2) modify unittests to test both modes
3) make format
4) refine hash functor
5) push to master
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6240
Differential Revision: D19301296
fbshipit-source-id: 5b5b3cbd39558f43947f7d2dec6cd31a06386edb
