Summary: Based on comment from D37455
Test Plan: make install after make static_lib
Reviewers: meyering
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D37461
Summary: make install fails when there is no shared lib. We need to revert the conditions, which will have the same effect, but without the failure
Test Plan: make install after only compiling static library
Reviewers: meyering
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D37455
Summary: The current version tries to install librocksdb.so even though it doesn't exist. This version will install librocksdb.so.3.10.0 and then create soft links in place
Test Plan:
`make static_lib; sudo make install` does not try to install librocksdb.so
`make shared_lib; sudo make install` installs one library and 3 symlinks. Before, four libraries were installed
Reviewers: sdong, meyering
Reviewed By: meyering
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D37425
Summary: Make target for running all xfunc tests
Test Plan: make xfunc
Reviewers: igor, sdong, meyering
Reviewed By: meyering
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D36873
Summary:
1. it doesn't work
2. we're not using it
In the future, if we need general benchmark framework, we should probably use https://github.com/google/benchmark
Test Plan: make all
Reviewers: yhchiang, rven, anthony, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D36777
Summary: Add tests for MemTableList
Test Plan: run test
Reviewers: yhchiang, kradhakrishnan, sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D36735
Summary: "make commit-prereq" uses "make release" which overrides OPT, so ROCKSDB_LITE is not covered. Fix it by using "make static_lib"
Test Plan: Run it and see it fail (which is expected)
Reviewers: yhchiang, meyering, rven, anthony, kradhakrishnan, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D36813
Summary: I don't think we need to use whole-archive to include jemalloc. This change only affects our development builds -- it does not affect our open source builds (which don't support jemalloc) or our fbcode third-party2 builds (which use open-source build codepaths).
Test Plan:
make
verify that jemalloc is running by running `MALLOC_CONF="prof:true" ./cache_test` and observing that file was created
Reviewers: MarkCallaghan
Reviewed By: MarkCallaghan
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D36783
Summary: These two files are test binaries and are not included in TESTS in Makefile.
Test Plan: `make clean` now deletes those files, too
Reviewers: sdong, kradhakrishnan, meyering
Reviewed By: kradhakrishnan, meyering
Subscribers: kradhakrishnan, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D36705
Summary:
When building rocksdbjava and rocksdbjavastatic, create -fPIC-enabled
binaries in a temporary subdirectory, jl/.
* Makefile (java_libobjects): New variable.
(java_libobjects): New rule.
(CLEAN_FILES): Arrange for "make clean" to remove that temporary dir.
(rocksdbjavastatic): Depend on the new variable.
Remove useless OPT=... line.
(rocksdbjava): Likewise.
Test Plan:
JAVA_HOME=/usr/local/jdk-7u67-64 PATH=$JAVA_HOME/bin:$PATH \
make rocksdbjavastatic
Reviewers: yhchiang
Reviewed By: yhchiang
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D36645
Summary:
* src.mk (JNI_NATIVE_SOURCES): New variable, so we don't have to use
a glob in Makefile
* Makefile (JNI_NATIVE_SOURCES): Remove glob-using definition, now
that the explicit list of sources is in src.mk.
Test Plan:
Run this:
JAVA_HOME=/usr/local/jdk-7u67-64 PATH=$JAVA_HOME/bin:$PATH \
make rocksdbjava
Reviewers: yhchiang
Reviewed By: yhchiang
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D36633
Summary:
As described in https://github.com/facebook/rocksdb/issues/563, we should add minor version to SONAME, since we break ABI with minor releases.
I also turned PLATFORM_SHARED_VERSIONED to true by default. This is true in LevelDB and it was switched to false by D15117 for no apparent reason. It should only be false for iOS.
Test Plan: `make shared_lib` produced librocksdb.dylib.3.10.0
Reviewers: sdong, yhchiang, meyering
Reviewed By: meyering
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D36573
Summary:
When GNU parallel is available, "make check" tests are now run in parallel.
When /dev/shm is usable, we tell those tests to create temporary files therein.
Now, the longest-running single test, db_test, (which is composed of hundreds of sub-tests)
is no longer run sequentially: instead, each of its sub-tests is run independently, and can
be parallelized along with all other tests. To make that process easier, this change
creates a temporary directory, "t/", in which it puts a small script for each of those
subtests. The output from each parallel-run test is now saved in t/log-TEST_NAME.
When GNU parallel is not available, we run the tests in sequence, just as before.
If GNU parallel is available and you don't like the default of running one subtest
per core, you can invoke "make J=1 check" to run only one test at a time.
Beware: this will take a long time, and it starts with the two longest-running tests, so you
will wait for a long time before seeing any results. Instead, if you want to use fewer resources
but still see useful progress, try "make J=60% check". That will attempt to ensure that 60% of
the cores are occupied by test runs.
To watch progress of individual tests (duration, success (PASS-or-FAIL), name), run "make watch-log"
in the same directory from another window. That will start with something like this:
and when complete should show numbers/names like this:
Every 0.1s: sort -k7,7nr -k4,4gr LOG|perl -n -e '@a=split("\t",$_,-1); $t=$a[8]; $t =~ s,^\./,,;' -e '$t =~ s, >.*,,; chomp $t;' -e '$t =~ /.*--gtest_filter=... Wed Apr 1 10:51:42 2015
152.221 PASS t/DBTest.FileCreationRandomFailure
109.280 PASS t/DBTest.EncodeDecompressedBlockSizeTest
82.315 PASS reduce_levels_test
77.812 PASS t/DBTest.CompactionFilterWithValueChange
73.236 PASS backupable_db_test
63.428 PASS deletefile_test
57.248 PASS table_test
55.665 PASS prefix_test
49.816 PASS t/DBTest.RateLimitingTest
...
Test Plan:
Timings (measured so as to exclude compile and link times):
With this change, all tests complete in 2m40s on a system for which nproc prints 32.
Prior to this this change, "make check" would take 24.5 minutes on that same system.
Here are durations (in seconds) of the longest-running subtests:
152.435 PASS t/DBTest.FileCreationRandomFailure
107.070 PASS t/DBTest.EncodeDecompressedBlockSizeTest
81.391 PASS ./reduce_levels_test
71.587 PASS ./backupable_db_test
61.746 PASS ./deletefile_test
57.960 PASS ./table_test
55.230 PASS ./prefix_test
54.060 PASS t/DBTest.CompactionFilterWithValueChange
48.873 PASS t/DBTest.RateLimitingTest
47.569 PASS ./fault_injection_test
46.593 PASS t/DBTest.Randomized
42.662 PASS t/DBTest.CompactionFilter
31.793 PASS t/DBTest.SparseMerge
30.612 PASS t/DBTest.CompactionFilterV2
25.891 PASS t/DBTest.GroupCommitTest
23.863 PASS t/DBTest.DynamicLevelMaxBytesBase
22.976 PASS ./rate_limiter_test
18.942 PASS t/DBTest.OptimizeFiltersForHits
16.851 PASS ./env_test
15.399 PASS t/DBTest.CompactionFilterV2WithValueChange
14.827 PASS t/DBTest.CompactionFilterV2NULLPrefix
Reviewers: igor, sdong, rven, yhchiang, igor.sugak
Reviewed By: igor.sugak
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D35379
Summary:
Just couple of small changes:
1. removed signal_test, since it doesn't seem useful and we don't even run it as part of `make check`
2. moved perf_context_test to TESTS instead of PROGRAMS
3. `make release` probably shouldn't compile benchmarks. We currently rely on `make release` building db_bench (via Jenkins), so I left db_bench there.
This is just a minor cleanup. We need to rethink our targets since they are a bit messy right now. We can do this during our tech debt week.
Test Plan: make release
Reviewers: anthony, rven, yhchiang, sdong, meyering
Reviewed By: meyering
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D36171
Summary:
This fixes two bugs: "make clean" would never remove the generated
file, util/build_version.cc, and since D33591, would be regenerated
only if it were absent.
* Makefile (clean): Remove the generated file.
(util/build_version.cc): Depend on the no-prereq FORCE target,
so that this target's rules are always run.
Since this is a generated file, make it read-only.
Also, be sure to remove the temporary file when it is the same
as the original.
Test Plan:
Ensure that we attempt regeneration every time.
Make it empty with an up-to-date time stamp and demonstrate
that it is rebuilt with the expected content:
$ : > util/build_version.cc
$ make util/build_version.o
GEN util/build_version.cc
GEN util/build_version.d
GEN util/build_version.cc
CC util/build_version.o
$ cat util/build_version.cc
#include "build_version.h"
const char* rocksdb_build_git_sha = "rocksdb_build_git_sha:v3.10-2-gb30e72a";
const char* rocksdb_build_git_date = "rocksdb_build_git_date:2015-03-27";
const char* rocksdb_build_compile_date = __DATE__;
Reviewers: igor.sugak, sdong, ljin, igor, rven
Reviewed By: rven
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D36087
Summary:
* Makefile (COMPILE_WITH_TSAN): Avoid a link failure by disabling
-pg when building with TSAN enabled.
Now that "make check" builds all $(PROGRAMS), it is linking
a few programs that were not normally linked before.
For example, this would fail to link with the following diagnostic:
COMPILE_WITH_TSAN=1 make -j40 log_and_apply_bench
CCLD log_and_apply_bench
ld: /usr/lib/../lib64/gcrt1.o: relocation R_X86_64_32S against `__libc_csu_fini' can not be used when making a shared object; recompile with -fPIC
/usr/lib/../lib64/gcrt1.o: error adding symbols: Bad value
collect2: error: ld returned 1 exit status
Makefile:511: recipe for target 'log_and_apply_bench' failed
make: *** [log_and_apply_bench] Error 1
Since removing -pg is sufficient to get past this link
failure, and no one cares about profiling TSAN-enabled
binaries anyway, we will refrain from linking with -pg
when TSAN testing is enabled. Use a new variable, "pg"
which is set to "-pg" in most cases, but that is made
empty when COMPILE_WITH_TSAN is set.
Test Plan:
Now, this succeeds:
rm -f log_and_apply_bench
COMPILE_WITH_TSAN=1 make -j40 log_and_apply_bench
Reviewers: igor.sugak, rven, sdong, ljin, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D35943
Summary:
* Makefile (check): Cause "make check" to build all $(PROGRAMS),
so that it verifies that the few benchmark-only source files that
not already built via "make check" do compile and link successfully.
Test Plan:
run "make clean; make check", and verify that
table/table_reader_bench.cc is now compiled.
Before, it was not, which led to an incomplete fix
for a build break.
Reviewers: ljin, igor.sugak, rven, igor, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D35883
Summary:
changed make unity target to use $LIB_SOURCES as a source of library source code. In the old way (using find) table/mock_table.h was added to a list of library objects and this was a course of `make unity` break.
`build_tools/unity` contains some redundant code, I deleted it and moved the functionality in the Makefile.
Test Plan:
Make sure unity completes with no errors.
```lang=bash
% make unity
```
Reviewers: sdong, rven, igor, meyering
Reviewed By: igor, meyering
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D35385
Summary: Make it easier for people to run all the tests.
Test Plan: Run it.
Reviewers: rven, yhchiang, igor, MarkCallaghan, IslamAbdelRahman, igor.sugak, anthony, kradhakrishnan, meyering
Reviewed By: meyering
Subscribers: meyering, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35319
Summary:
Adds gtest fused source code into `third-party` directory. No manual changes.
gtest latest released 1.7 has clang dev compilation errors. Trunk version requires only one disabled warning (-Wno-missing-field-initializers)
Fused code is made as described here https://fburl.com/90806322
Details about why we need gtest source code instead of precompiled library https://fburl.com/90805763
Source used from http://googletest.googlecode.com/svn/trunk
Test Plan:
Build and notice no errors. Also check in logs that gtest-all.o being compiled gtest-all.o.
```lang=bash
% USE_CLANG=1 make all
```
Reviewers: lgalanis, yufei.zhu, rven, sdong, igor, meyering
Reviewed By: meyering
Subscribers: meyering, yhchiang, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D33345
Summary:
Here's my proposal for making our LOGs easier to read by machines.
The idea is to dump all events as JSON objects. JSON is easy to read by humans, but more importantly, it's easy to read by machines. That way, we can parse this, load into SQLite/mongo and then query or visualize.
I started with table_create and table_delete events, but if everybody agrees, I'll continue by adding more events (flush/compaction/etc etc)
Test Plan:
Ran db_bench. Observed:
2015/01/15-14:13:25.788019 1105ef000 EVENT_LOG_v1 {"time_micros": 1421360005788015, "event": "table_file_creation", "file_number": 12, "file_size": 1909699}
2015/01/15-14:13:25.956500 110740000 EVENT_LOG_v1 {"time_micros": 1421360005956498, "event": "table_file_deletion", "file_number": 12}
Reviewers: yhchiang, rven, dhruba, MarkCallaghan, lgalanis, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D31647
Summary:
Any time one would modify a dependent of any *test*.cc file,
"make" would fail to rebuild the affected test binaries,
e.g., db_test. That was due to the fact that we deliberately
excluded those test-related files from the definition of SOURCES
and only $(SOURCES) was used to create the automatically-generated
.d dependency files. The fix is to generate a .d file for every
source file.
* src.mk: New file. Defines LIB_SOURCES, MOCK_SOURCES
and TEST_BENCH_SOURCES.
* Makefile: Include src.mk.
Reflect s/SOURCES/LIB_SOURCES/ renaming.
* build_tools/build_detect_platform: Remove the code
that was used to generate SOURCES= and MOCK_SOURCES=
definitions in make_config.mk. Those lists of files
are now hard-coded in src.mk. Hard-coding this list of
sources is desirable, because without that, one risks
including stray .cc files in a build. Not reproducible.
Test Plan:
Touch a file used by db_test's dependent .o files and ensure that
they are all recompiled. Before, none would be:
$ touch db/db_impl.h && make db_test
CC db/db_test.o
CC db/column_family.o
CC db/db_filesnapshot.o
CC db/db_impl.o
CC db/db_impl_debug.o
CC db/db_impl_readonly.o
CC db/forward_iterator.o
CC db/internal_stats.o
CC db/managed_iterator.o
CC db/repair.o
CC db/write_batch.o
CC utilities/compacted_db/compacted_db_impl.o
CC utilities/ttl/db_ttl_impl.o
CC util/ldb_cmd.o
CC util/ldb_tool.o
CC util/sst_dump_tool.o
CC util/xfunc.o
CCLD db_test
Reviewers: ljin, igor.sugak, igor, rven, sdong
Reviewed By: sdong
Subscribers: yhchiang, adamretter, fyrz, dhruba
Differential Revision: https://reviews.facebook.net/D33849
Summary:
This patch will update the Makefile and source code so that we can build RocksDB successfully on FreeBSD 10 and 11 (64-bit and 32-bit)
I have also encountered some problems when running tests on FreeBSD, I will try to fix them individually in different diffs
Notes:
- FreeBSD uses clang as it's default compiler (http://lists.freebsd.org/pipermail/freebsd-current/2012-September/036480.html)
- GNU C++ compiler have C++ 11 problems on FreeBSD (https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=193528)
- make is not gmake on FreeBSD (http://www.khmere.com/freebsd_book/html/ch01.html)
Test Plan:
Using VMWare Fusion Create 4 VM machines (FreeBSD 11 64-bit, FreeBSD 11 32-bit, FreeBSD 10 64-bit, FreeBSD 10 32-bit)
- pkg install git gmake gflags archivers/snappy
- git clone https://github.com/facebook/rocksdb.git
- apply this patch
- setenv CXX c++
- setenv CPATH /usr/local/include/
- setenv LIBRARY_PATH /usr/local/lib/
- gmake db_bench
- make sure compilation is successful and db_bench is running
- gmake all
- make sure compilation is successful
Reviewers: sdong, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D33891
Summary: See https://www.facebook.com/groups/rocksdb.dev/permalink/718536351578215/. We should enable people to run without warning-as-error, since we break this so often for different compilers.
Test Plan: introduce an warning, compile sucessfully
Reviewers: yhchiang, meyering, igor.sugak, rven, sdong
Reviewed By: sdong
Subscribers: adamretter, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D33963
Summary:
* Updated Makefile to exit `make analyze` with status 1 if scan-build detected any bugs.
* scan-build automatically detects which c++ compiler to use, and some times is uses wrong ones (from $CPP). Added implicit parameters to use $CC and $CXX.
* Added `scan_build_report` directory to .gitignore file.
* Added `scan_build_report` directory to clean target.
Test Plan:
Run `make analyze` and verify that exit status is 1, if there are scan-build bugs detected.
Run `make clean` and verify that files in `scan_build_report` directory are deleted.
After running `make analyze; git status` and verify that no untracked files in `scan_build_report` directory.
Reviewers: meyering, sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D33831
Summary:
* Makefile (WARNING_FLAGS): Add -W and -Wextra, and at least for now,
-Wno-unused-parameter. Without that latter one, there would be
many errors/warnings about unused parameters.
Test Plan:
run these and ensure there is no warning:
make clean && make
make clean && USE_CLANG=1 make
Reviewers: ljin, sdong, igor.sugak, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D33819
Summary:
Prior to this change, "make check" would always waste a lot of
time relinking 60+ binaries. With this change, it does that
only when the generated file, util/build_version.cc, changes,
and that happens only when the date changes or when the
current git SHA changes.
This change makes some other improvements: before, there was no
rule to build a deleted util/build_version.cc. If it was somehow
removed, any attempt to link a program would fail.
There is no longer any need for the separate file,
build_tools/build_detect_version. Its functionality is
now in the Makefile.
* Makefile (DEPFILES): Don't filter-out util/build_version.cc.
No need, and besides, removing that dependency was wrong.
(date, git_sha, gen_build_version): New helper variables.
(util/build_version.cc): New rule, to create this file
and update it only if it would contain new information.
* build_tools/build_detect_platform: Remove file.
* db/db_impl.cc: Now, print only date (not the time).
* util/build_version.h (rocksdb_build_compile_time): Remove
declaration. No longer used.
Test Plan:
- Run "make check" twice, and note that the second time no linking is performed.
- Remove util/build_version.cc and ensure that any "make"
command regenerates it before doing anything else.
- Run this: strings librocksdb.a|grep _build_.
That prints output including the following:
rocksdb_build_git_date:2015-02-19
rocksdb_build_git_sha:2.8.fb-1792-g3cb6cc0
Reviewers: ljin, sdong, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D33591
Summary:
The "ar" command was excessively verbose.
This abbreviates it to be like CC and LD.
Also, factor "rs" options into ARFLAGS.
Test Plan:
$ rm librocksdb.a
$ make librocksdb.a
AR librocksdb.a
ar: creating librocksdb.a
Reviewers: ljin, sdong, igor.sugak, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D33699
Summary:
Many link commands were identical.
Factor that out into a variable, AM_LINK, and use
it in place of all of those open-coded commands.
Test Plan: run "make check"
Reviewers: ljin, igor, sdong
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D33585
Summary:
With this change, make now prints a summary line for each
compiler and linker invocation, e.g.,:
CC db/builder.o
CC db/c.o
CC db/column_family.o
To see full commands, insert "V=1" into your make command.
E.g., run "make V=1 all" if you want it to print each command
in its full glory.
$^ is GNU make's abbreviation for the prerequisites of the current target.
These AM_V_... variables expand to some very short string like "CC" or
"LD", by default, so that the output of "make" is readable. If/when you
want more details, just build with "make V=1 ...", and make will print
each full command as it is executed. If you prefer to see the noise
all the time, and only want to optionally see the abbreviated output,
set AM_DEFAULT_VERBOSITY=1 in your environment, and then build with
V=0 to see the abbreviated command indicators.
Test Plan:
invoke make a few different ways and observe:
make clean; make # abbreviated
make clean; make V=0 # also abbreviated
make clean; make V=1 # full detail
Reviewers: sdong, ljin, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D33579
Summary:
This is in preparation for some factorization.
* Makefile (deletefile_test): Add $(COVERAGEFLAGS) to link command.
(options_test): Remove explicit (redundant) dependency on
options_helper.o: that is already a dependent, via $(LIBOBJECTS)
Test Plan: run make
Reviewers: sdong, ljin, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D33573
Summary:
There were Makefile rules to build those two targets,
but neither rule has worked for a long time, due to missing
dependent source files. Remove those rules.
Test Plan: run "make"
Reviewers: sdong, ljin, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D33567
Summary:
Before this change, running "make" with no arguments would
silently run the rules for the "uninstall" target(!). Don't do that.
* Makefile (default): New, first target; depend on "all".
(uninstall, install): Do not hide the commands we run.
Test Plan:
Run "make" and verify that the rules for "uninstall" are no longer run.
Instead, note that many files are compiled and linked. Before, none were.
Reviewers: sdong, ljin, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D33531
Summary:
* Makefile (dummy): Prefix this statement with "dummy := ",
so that it no longer triggers a syntax error from GNU make 3.80
and earlier. Reported by nielsl in
https://github.com/facebook/rocksdb/issues/509
Test Plan: run make
Reviewers: sdong, ljin, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D33429
Summary:
The code being removed would invoke sed differently to work
around a portability difference in how sed -i works (different
on MacOS). Yet performing a host-type-based ifdef fails when
the tools installed do not match. That sed use was solely to
post-process the .d file. Instead, generate the desired output
directly, by using the compiler's -MT<FILE> option.
* Makefile (%.d: %.cc): With the prior use of Makefile-ifdef'd
sed, when building on MacOS with gnu sed, every run of this rule
would fail with a sed usage error. Also list each .d file as a
dependent.
Test Plan:
Ensure that a selected .d file is the same as before both with
g++ and with clang++. However, note that the new .d files each
contain a new reference to the .d file itself.
Reviewers: sdong, ljin, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D33369
Summary:
Added new target ##make analyze## into Makefile. This command runs clang static analyzer and builds the sources as ##make all##. The result report is put into ##$(RocksDbSourceRoot)/can_build_report/##
If the development environment is a Facebook devserver and ##ROCKSDB_NO_FBCODE## is not set, then scan-build is used from fbcode. If it is run not on a Facebook devserver, scan-build should be available in ##$PATH##. I'll add details to wiki how to install scan-build on a non Facebook devserver environment.
Test Plan:
Run the fallowing commands on a Facebook devserver and Mac OS, and ensure no build or test errors.
```
% make all check -j32
% make clean
% USE_CLANG=1 make all -j32
% make analyze
% USE_CLANG=1 make analyze
```
Reviewers: sdong, lgalanis, leveldb, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D32799
Summary: Add CappedFixTransform, which is the same as fixed length prefix extractor, except that when slice is shorter than the fixed length, it will use the full key.
Test Plan:
Add a test case for
db_test
options_test
and a new test
Reviewers: yhchiang, rven, igor
Reviewed By: igor
Subscribers: MarkCallaghan, leveldb, dhruba, yoshinorim
Differential Revision: https://reviews.facebook.net/D31887
Summary: This was a feature request by osquery. See task t5617758
Test Plan: compiles and memenv_test runs
Reviewers: yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D32115
Summary:
There's a bug in TSAN (or libstdc++?) with std::shared_ptr<> for some reason. In db_test, only FlushSchedule is affected.
See more: https://groups.google.com/forum/#!topic/thread-sanitizer/vz_s-t226Vg
With this change and all other @sdong's and mine diffs, our db_test should be TSAN-clean. I'll move to other tests.
Test Plan: no more flush schedule when running TSAN
Reviewers: yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: sdong, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D32469
Summary: We don't have plans to work on this in the short term. If we ever resurrect the project, we can find the code in the history. No need for it to linger around
Test Plan: no test
Reviewers: yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D32349
Summary:
1. If WAL directory is different from db directory. Sync the directory after creating a log file under it.
2. After creating an SST file, sync its parent directory instead of DB directory.
3. change the check of kResetDeleteUnsyncedFiles in fault_injection_test. Since we changed the behavior to sync log files' parent directory after first WAL sync, instead of creating, kResetDeleteUnsyncedFiles will not guarantee to show post sync updates.
Test Plan: make all check
Reviewers: yhchiang, rven, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D32067
Summary: When you compile with COMPILE_WITH_TSAN=1, we will compile the code with -fsanitize=thread. This will resolve bunch of data race issues we might have.
Test Plan: COMPILE_WITH_TSAN=1 m db_test
Reviewers: yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D32019
Summary:
This is a port of [[ https://github.com/google/leveldb/blob/master/db/fault_injection_test.cc | LevelDB's fault_injection_test ]] to RocksDB. Unfortunately it fails with:
```
==== Test FaultInjectionTest.FaultTest
db/fault_injection_test.cc:491: Corruption: no meta-nextfile entry in descriptor
#0 ./fault_injection_test() [0x41477a] rocksdb::FaultInjectionTest::PartialCompactTestReopenWithFault(rocksdb::FaultInjectionTest::ResetMethod, int, int) /data/users/tomdzk/rocksdb/db/fault_injection_test.cc:491
#1 ./fault_injection_test() [0x40a38a] rocksdb::_Test_FaultTest::_Run() /data/users/tomdzk/rocksdb/db/fault_injection_test.cc:517
#2 ./fault_injection_test() [0x415bea] rocksdb::_Test_FaultTest::_RunIt() /data/users/tomdzk/rocksdb/db/fault_injection_test.cc:507
#3 ./fault_injection_test() [0x584367] rocksdb::test::RunAllTests() /data/users/tomdzk/rocksdb/util/testharness.cc:70
#4 /usr/local/fbcode/gcc-4.8.1-glibc-2.17/lib/libc.so.6(__libc_start_main+0x10e) [0x7f7a40857efe] ?? ??:0
#5 ./fault_injection_test() [0x408bb8] _start ??:0
```
so I commented out the test invocation in the source code for now (lines 514-520) so it can be merged.
Test Plan: This is a new test.
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D31587
Summary: I'm tired of double-tab when opening build_tools/<something>. This change will make bu<tab> fully complete my path :)
Test Plan: `vi bu<tab>` gives me `vi build_tools/` yay!
Reviewers: yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D30639
Summary:
Create a benchmark for testing memtablereps. This diff is a bit rough, but it should do the trick until other bootcampers can clean it up.
Addressing comments
Removed the mutexes
Changed ReadWriteBenchmark to fix number of reads and count the number of writes we can perform in that time.
Test Plan:
Run it.
Below runs pass
./memtablerep_bench --benchmarks fillrandom,readrandom --memtablerep skiplist
./memtablerep_bench --benchmarks fillseq,readseq --memtablerep skiplist
./memtablerep_bench --benchmarks readwrite,seqreadwrite --memtablerep skiplist --num_operations 200 --num_threads 5
./memtablerep_bench --benchmarks fillrandom,readrandom --memtablerep hashskiplist
./memtablerep_bench --benchmarks fillseq,readseq --memtablerep hashskiplist
--num_scans 2
./memtablerep_bench --benchmarks fillseq,readseq --memtablerep vector
Reviewers: jpaton, ikabiljo, sdong
Reviewed By: sdong
Subscribers: dhruba, ameyag
Differential Revision: https://reviews.facebook.net/D22683
Summary:
Add support to allow nested config for block-based table factory. The format looks like this:
"write_buffer_size=1024;block_based_table_factory={block_size=4k};max_write_buffer_num=2"
Test Plan: unit test
Reviewers: yhchiang, rven, igor, ljin, jonahcohen
Reviewed By: jonahcohen
Subscribers: jonahcohen, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D29223
Summary: Add -fno-exceptions flag to ROCKSDB_LITE.
Test Plan: make OPT=-DROCKSDB_LITE shared_lib -j32
Reviewers: sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D29901
Summary:
While running rocksdb tests, we sometimes encounter errors and
the test run stops. We now provide a new make target call check_some
which restarts the test run from a specific test and continues from
there depending on the value of the environment variable ROCKSDBTESTS_START
Test Plan:
Run make check_some with different values of
ROCKSDBTESTS_START.
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D29913
Summary:
Add GetThreadList API, which allows developer to track the
status of each process. Currently, calling GetThreadList will
only get the list of background threads in RocksDB with their
thread-id and thread-type (priority) set. Will add more support
on this in the later diffs.
ThreadStatus currently has the following properties:
// An unique ID for the thread.
const uint64_t thread_id;
// The type of the thread, it could be ROCKSDB_HIGH_PRIORITY,
// ROCKSDB_LOW_PRIORITY, and USER_THREAD
const ThreadType thread_type;
// The name of the DB instance where the thread is currently
// involved with. It would be set to empty string if the thread
// does not involve in any DB operation.
const std::string db_name;
// The name of the column family where the thread is currently
// It would be set to empty string if the thread does not involve
// in any column family.
const std::string cf_name;
// The event that the current thread is involved.
// It would be set to empty string if the information about event
// is not currently available.
Test Plan:
./thread_list_test
export ROCKSDB_TESTS=GetThreadList
./db_test
Reviewers: rven, igor, sdong, ljin
Reviewed By: ljin
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D25047
Currently maven publishing uses the library with debug symbols. What
leads to unnecessary big library sizes. Included strip to remove
unnecessary stuff. 40M -> 2.7M
Previous to this commit too much targets got dependencies
on javadocs target.
Introduced one additional target "javalib" which resolves
that situation. JavaDoc will now be generated once while
executing a task with prefix "rocksdbjava".
Summary:
This is just a simple test that passes two files though a compaction. It shows the framework so that people can continue building new compaction *unit* tests.
In the future we might want to move some Compaction* tests from DBTest here. For example, CompactBetweenSnapshot seems a good candidate.
Hopefully this test can be simpler when we mock out VersionSet.
Test Plan: this is a test
Reviewers: ljin, rven, yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28449
Summary:
We need to turn on -Wshorten-64-to-32 for mobile. See D1671432 (internal phabricator) for details.
This diff turns on the warning flag and fixes all the errors. There were also some interesting errors that I might call bugs, especially in plain table. Going forward, I think it makes sense to have this flag turned on and be very very careful when converting 64-bit to 32-bit variables.
Test Plan: compiles
Reviewers: ljin, rven, yhchiang, sdong
Reviewed By: yhchiang
Subscribers: bobbaldwin, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28689
Summary:
This diff adds three sets of APIs to RocksDB.
= GetColumnFamilyMetaData =
* This APIs allow users to obtain the current state of a RocksDB instance on one column family.
* See GetColumnFamilyMetaData in include/rocksdb/db.h
= EventListener =
* A virtual class that allows users to implement a set of
call-back functions which will be called when specific
events of a RocksDB instance happens.
* To register EventListener, simply insert an EventListener to ColumnFamilyOptions::listeners
= CompactFiles =
* CompactFiles API inputs a set of file numbers and an output level, and RocksDB
will try to compact those files into the specified level.
= Example =
* Example code can be found in example/compact_files_example.cc, which implements
a simple external compactor using EventListener, GetColumnFamilyMetaData, and
CompactFiles API.
Test Plan:
listener_test
compactor_test
example/compact_files_example
export ROCKSDB_TESTS=CompactFiles
db_test
export ROCKSDB_TESTS=MetaData
db_test
Reviewers: ljin, igor, rven, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D24705
Summary:
Only one more try, I promise.
I talked to Jim and he mentioned that if we include our system includes with -isystem rather than with -I, that signals to the compile that those are system includes and thus no warnings are issued. So I turned our glibc includes into system includes and now we no longer get the warning from there, making us shadow-warning-free!
Test Plan: compiles with both clang and gcc
Reviewers: sdong, yhchiang, rven, ljin
Reviewed By: ljin
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28479
Summary:
So glibc is not -Wshadow-safe, so we need to turn it off :(
error: ‘int sigaction(int, const sigaction*, sigaction*)’ hides
constructor for ‘struct sigaction’
The rest of the changes in this diff is that we include .h files under rocksdb namespace, which is a no-no.
Test Plan: compiles now
Reviewers: ljin, yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28413
Summary: It turns out that -Wshadow has different rules for gcc than clang. Previous commit fixed clang. This commits fixes the rest of the warnings for gcc.
Test Plan: compiles
Reviewers: ljin, yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28131
Summary:
TestMemEnv simulates all Env APIs using in-memory data structures.
We can use it to speed up db_test run, which is now reduced ~7mins when it is
enabled.
We can also add features to simulate power/disk failures in the next
step
TestMemEnv is derived from helper/mem_env
mem_env can not be used for rocksdb since some of its APIs do not give
the same results as env_posix. And its file read/write is not thread safe
Test Plan:
make all -j32
./db_test
./env_mem_test
Reviewers: sdong, yhchiang, rven, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28035
Summary: as title
Test Plan: ./c_test
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28119
Summary:
...and fix all the errors :)
Jim suggested turning on -Wshadow because it helped him fix number of critical bugs in fbcode. I think it's a good idea to be -Wshadow clean.
Test Plan: compiles
Reviewers: yhchiang, rven, sdong, ljin
Reviewed By: ljin
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D27711
Summary:
Rename Version::Builder to VersionBuilder and expose its definition to a header.
Make VerisonBuilder not reference Version or ColumnFamilyData, only working with VersionStorageInfo.
Add version_builder_test which has a simple test.
Test Plan: make all check
Reviewers: rven, yhchiang, igor, ljin
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D27969
Summary: Decoupling code that deals with archived log files outside of DBImpl. That will make this code easier to reason about and test. It will also make the code easier to improve, because an improver doesn't have to understand DBImpl code in entirety.
Test Plan: added test
Reviewers: ljin, yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D27873
Summary:
Add some helper functions to make sure DB works well for non-default comparators.
Add a test for SimpleSuffixReverseComparator.
Test Plan: Run the new test
Reviewers: ljin, rven, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D27831
Summary:
Make compaction picker easier to test.
The basic idea is to separate a minimum subcomponent of Version to VersionStorageInfo, which just responsible to LSM tree. A stub VersionStorageInfo can then be easily created and passed into compaction picker so that we can check the outputs.
It now passes most tests. Still two things need to be done:
(1) deal with the FIFO compaction's file size.
(2) write an example test to make sure the interface can do the job.
Add a compaction_picker_test to make sure compaction picker codes can be easily unit tested.
Test Plan:
Pass all unit tests and compaction_picker_test
Reviewers: yhchiang, rven, igor, ljin
Reviewed By: ljin
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D27639
Summary:
This diff replaces BlockBasedTable in flush_job_test with TableMock, making it depend on less things and making it closer to an unit test than integration test.
It also introduces a framework to compile mock classes -- Any file named *mock.cc will not be compiled into the build. It will only get compiled into the tests. What way we can mock out most other classes, Version, VersionSet, DBImpl, etc.
Test Plan: flush_job_test
Reviewers: ljin, rven, yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D27681
Summary:
Abstract out FlushProcess and take it out of DBImpl.
This also includes taking DeletionState outside of DBImpl.
Currently this diff is only doing the refactoring. Future work includes:
1. Decoupling flush_process.cc, make it depend on less state
2. Write flush_process_test, which will mock out everything that FlushProcess depends on and test it in isolation
Test Plan: make check
Reviewers: rven, yhchiang, sdong, ljin
Reviewed By: ljin
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D27561
Summary: perf_context.get_from_output_files_time is now only set writable DB's DB::Get(). Extend it to MultiGet() and read only DB.
Test Plan:
make all check
Fix perf_context_test and extend it to cover MultiGet(), as long as read-only DB. Run it and watch the results
Reviewers: ljin, yhchiang, igor
Reviewed By: igor
Subscribers: rven, leveldb
Differential Revision: https://reviews.facebook.net/D24207
Summary:
Before this diff, there are two places with rocksdb versions. After the diff:
1. we only have one source of truth for rocksdb version
2. we have a script that we can use to get the version that we can use in other compilations (java, go, etc).
Test Plan: make
Reviewers: yhchiang, sdong, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D24333
Summary:
I put together a script to assist in the generation of deb's and
rpm's. I've tested that this works on ubuntu via vagrant. I've included the
Vagrantfile here, but I can remove it if it's not useful. The package.sh
script should work on any ubuntu or centos machine, I just added a bit of
logic in there to allow a base Ubuntu or Centos machine to be able to build
RocksDB from scratch.
Example output on Ubuntu 14.04:
```
root@vagrant-ubuntu-trusty-64:/vagrant# ./tools/package.sh
[+] g++-4.7 is already installed. skipping.
[+] libgflags-dev is already installed. skipping.
[+] ruby-all-dev is already installed. skipping.
[+] fpm is already installed. skipping.
Created package {:path=>"rocksdb_3.5_amd64.deb"}
root@vagrant-ubuntu-trusty-64:/vagrant# dpkg --info rocksdb_3.5_amd64.deb
new debian package, version 2.0.
size 17392022 bytes: control archive=1518 bytes.
275 bytes, 11 lines control
2911 bytes, 38 lines md5sums
Package: rocksdb
Version: 3.5
License: BSD
Vendor: Facebook
Architecture: amd64
Maintainer: rocksdb@fb.com
Installed-Size: 83358
Section: default
Priority: extra
Homepage: http://rocksdb.org/
Description: RocksDB is an embeddable persistent key-value store for fast storage.
```
Example output on CentOS 6.5:
```
[root@localhost vagrant]# rpm -qip rocksdb-3.5-1.x86_64.rpm
Name : rocksdb Relocations: /usr
Version : 3.5 Vendor: Facebook
Release : 1 Build Date: Mon 29 Sep 2014 01:26:11 AM UTC
Install Date: (not installed) Build Host: localhost
Group : default Source RPM: rocksdb-3.5-1.src.rpm
Size : 96231106 License: BSD
Signature : (none)
Packager : rocksdb@fb.com
URL : http://rocksdb.org/
Summary : RocksDB is an embeddable persistent key-value store for fast storage.
Description :
RocksDB is an embeddable persistent key-value store for fast storage.
```
Test Plan:
How this gets used is really up to the RocksDB core team. If you
want to actually get this into mainline, you might have to change `make
install` such that it install the RocksDB shared object file as well, which
would require you to link against gflags (maybe?) and that would require some
potential modifications to the script here (basically add a depends on that
package).
Currently, this will install the headers and a pre-compiled statically linked
object file. If that's what you want out of life, than this requires no
modifications.
Reviewers: ljin, yhchiang, igor
Reviewed By: igor
Differential Revision: https://reviews.facebook.net/D24141
Summary:
Intead of passing callback function pointer and its arg on Table::Get()
interface, passing GetContext. This makes the interface cleaner and
possible better perf. Also adding a fast pass for SaveValue()
Test Plan: make all check
Reviewers: igor, yhchiang, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D24057
Summary:
Add make install. If INSTALL_PATH is not set, then rocksdb will be
installed under "/usr/local" directory (/usr/local/include for headers
and /usr/local/lib for library file(s).)
Test Plan:
Develop a simple rocksdb app, called test.cc, and do the followings.
make clean
make static_lib -j32
sudo make install
g++ -std=c++11 test.cc -lrocksdb -lbz2 -lz -o test
./test
sudo make uninstall
make clean
make shared_lib -j32
sudo make install
g++ -std=c++11 test.cc -lrocksdb -lbz2 -lz -o test
./test
make INSTALL_PATH=/tmp/path install
make INSTALL_PATH=/tmp/path uninstall
and make sure things are installed / uninstalled in the specified path.
Reviewers: ljin, sdong, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23211
Summary:
Introducing WriteController, which is a source of truth about per-DB write delays. Let's define an DB epoch as a period where there are no flushes and compactions (i.e. new epoch is started when flush or compaction finishes). Each epoch can either:
* proceed with all writes without delay
* delay all writes by fixed time
* stop all writes
The three modes are recomputed at each epoch change (flush, compaction), rather than on every write (which is currently the case).
When we have a lot of column families, our current pull behavior adds a big overhead, since we need to loop over every column family for every write. With new push model, overhead on Write code-path is minimal.
This is just the start. Next step is to also take care of stalls introduced by slow memtable flushes. The final goal is to eliminate function MakeRoomForWrite(), which currently needs to be called for every column family by every write.
Test Plan: make check for now. I'll add some unit tests later. Also, perf test.
Reviewers: dhruba, yhchiang, MarkCallaghan, sdong, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22791
Summary:
1. Make filter_block.h a base class. Derive block_based_filter_block and full_filter_block. The previous one is the traditional filter block. The full_filter_block is newly added. It would generate a filter block that contain all the keys in SST file.
2. When querying a key, table would first check if full_filter is available. If not, it would go to the exact data block and check using block_based filter.
3. User could choose to use full_filter or tradional(block_based_filter). They would be stored in SST file with different meta index name. "filter.filter_policy" or "full_filter.filter_policy". Then, Table reader is able to know the fllter block type.
4. Some optimizations have been done for full_filter_block, thus it requires a different interface compared to the original one in filter_policy.h.
5. Actual implementation of filter bits coding/decoding is placed in util/bloom_impl.cc
Benchmark: base commit 1d23b5c470
Command:
db_bench --db=/dev/shm/rocksdb --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --write_buffer_size=134217728 --max_write_buffer_number=2 --target_file_size_base=33554432 --max_bytes_for_level_base=1073741824 --verify_checksum=false --max_background_compactions=4 --use_plain_table=0 --memtablerep=prefix_hash --open_files=-1 --mmap_read=1 --mmap_write=0 --bloom_bits=10 --bloom_locality=1 --memtable_bloom_bits=500000 --compression_type=lz4 --num=393216000 --use_hash_search=1 --block_size=1024 --block_restart_interval=16 --use_existing_db=1 --threads=1 --benchmarks=readrandom —disable_auto_compactions=1
Read QPS increase for about 30% from 2230002 to 2991411.
Test Plan:
make all check
valgrind db_test
db_stress --use_block_based_filter = 0
./auto_sanity_test.sh
Reviewers: igor, yhchiang, ljin, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D20979
Summary: In DBImpl::Recover method, while loading memtables, also check if memtables are empty. Use this in DBImplReadonly to determine whether to lookup memtable or not.
Test Plan:
db_test
make check all
Reviewers: sdong, yhchiang, ljin, igor
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22281
Summary:
Add WriteBatchWithIndex so that a user can query data out of a WriteBatch, to support MongoDB's read-its-own-write.
WriteBatchWithIndex uses a skiplist to store the binary index. The index stores the offset of the entry in the write batch. When searching for a key, the key for the entry is read by read the entry from the write batch from the offset.
Define a new iterator class for querying data out of WriteBatchWithIndex. A user can create an iterator of the write batch for one column family, seek to a key and keep calling Next() to see next entries.
I will add more unit tests if people are OK about this API.
Test Plan:
make all check
Add unit tests.
Reviewers: yhchiang, igor, MarkCallaghan, ljin
Reviewed By: ljin
Subscribers: dhruba, leveldb, xjin
Differential Revision: https://reviews.facebook.net/D21381
Summary: as title
Test Plan:
make all check
ran db_bench and saw seek stats at the end
Reviewers: yhchiang, igor, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D21651
Summary:
Contains the following changes:
- Implementation of cuckoo_table_factory
- Adding cuckoo table into AdaptiveTableFactory
- Adding cuckoo_table_db_test, similar to lines of plain_table_db_test
- Minor fixes to Reader: When a key is found in the table, return the key found instead of the search key.
- Minor fixes to Builder: Add table properties that are required by Version::UpdateTemporaryStats() during Get operation. Don't define curr_node as a reference variable as the memory locations may get reassigned during tree.push_back operation, leading to invalid memory access.
Test Plan:
cuckoo_table_reader_test --enable_perf
cuckoo_table_builder_test
cuckoo_table_db_test
make check all
make valgrind_check
make asan_check
Reviewers: sdong, igor, yhchiang, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D21219
* Script for building the unity.cc file via Makefile
* Unity executable Makefile target for testing builds
* Source code changes to fix compilation of unity build
Summary:
Contains:
- Implementation of TableReader based on Cuckoo Hashing
- Unittests for CuckooTableReader
- Performance test for TableReader
Test Plan:
make cuckoo_table_reader_test
./cuckoo_table_reader_test
make valgrind_check
make asan_check
Reviewers: yhchiang, sdong, igor, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D20511
Summary:
This diff is adding spatial index support to RocksDB.
When creating the DB user specifies a list of spatial indexes. Spatial indexes can cover different areas and have different resolution (i.e. number of tiles). This is useful for supporting different zoom levels.
Each element inserted into SpatialDB has:
* a bounding box, which determines how will the element be indexed
* string blob, which will usually be WKB representation of the polygon (http://en.wikipedia.org/wiki/Well-known_text)
* feature set, which is a map of key-value pairs, where value can be int, double, bool, null or a string. FeatureSet will be a set of tags associated with geo elements (for example, 'road': 'highway' and similar)
* a list of indexes to insert the element in. For example, small river element will be inserted in index for high zoom level, while country border will be inserted in all indexes (including the index for low zoom level).
Each query is executed on single spatial index. Query guarantees that it will return all elements intersecting the specified bounding box, but it might also return some extra non-intersecting elements.
Test Plan: Added bunch of unit tests in spatial_db_test
Reviewers: dhruba, yinwang
Reviewed By: yinwang
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D20361
Summary:
Add the missing ROCKSDB_JAR variable in Makefile, which is mistakenly
removed in https://reviews.facebook.net/D20289.
Test Plan:
export ROCKSDB_JAR=
make rocksdbjava
Summary:
Add a function GetOptions(), where based on four parameters users give: read/write amplification threshold, memory budget for mem tables and target DB size, it picks up a compaction style and parameters for them. Background threads are not touched yet.
One limit of this algorithm: since compression rate and key/value size are hard to predict, it's hard to predict level 0 file size from write buffer size. Simply make 1:1 ratio here.
Sample results: https://reviews.facebook.net/P477
Test Plan: Will add some a unit test where some sample scenarios are given and see they pick the results that make sense
Reviewers: yhchiang, dhruba, haobo, igor, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D18741
Summary:
Fixed some make and linking issues of RocksDBJava. Specifically:
* Add JAVA_LDFLAGS, which does not include gflags
* rocksdbjava library now uses JAVA_LDFLAGS instead of LDFLAGS
* java/Makefile now includes build_config.mk
* rearrange make rocksdbjava workflow to ensure the library file is correctly
included in the jar file.
Test Plan:
make rocksdbjava
make jdb_bench
java/jdb_bench.sh
Reviewers: dhruba, swapnilghike, zzbennett, rsumbaly, ankgup87
Reviewed By: ankgup87
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D20289
Summary:
Add -Wsign-compare to WARNING_FLAGS in Makefile as not all g++ compiler
include -Wsign-compare in -Wall when compiling '.h' file.
Test Plan: make -j32
Reviewers: ljin, igor, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D20169
Summary:
This is a rough sketch of our new document API. Would like to get some thoughts and comments about the high-level architecture and API.
I didn't optimize for performance at all. Leaving some low-hanging fruit so that we can be happy when we fix them! :)
Currently, bunch of features are not supported at all. Indexes can be only specified when creating database. There is no query planner whatsoever. This will all be added in due time.
Test Plan: Added a simple unit test
Reviewers: haobo, yhchiang, dhruba, sdong, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D18747
Summary:
A generic rate limiter that can be shared by threads and rocksdb
instances. Will use this to smooth out write traffic generated by
compaction and flush. This will help us get better p99 behavior on flash
storage.
Test Plan:
unit test output
==== Test RateLimiterTest.Rate
request size [1 - 1023], limit 10 KB/sec, actual rate: 10.374969 KB/sec, elapsed 2002265
request size [1 - 2047], limit 20 KB/sec, actual rate: 20.771242 KB/sec, elapsed 2002139
request size [1 - 4095], limit 40 KB/sec, actual rate: 41.285299 KB/sec, elapsed 2202424
request size [1 - 8191], limit 80 KB/sec, actual rate: 81.371605 KB/sec, elapsed 2402558
request size [1 - 16383], limit 160 KB/sec, actual rate: 162.541268 KB/sec, elapsed 3303500
Reviewers: yhchiang, igor, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19359
Summary:
After evaluating options for JSON storage, I decided to implement our own. The reason is that we'll be able to optimize it better and we get to reduce unnecessary dependencies (which is what we'd get with folly).
I also plan to write a serializer/deserializer for JSONDocument with our own binary format similar to BSON. That way we'll store binary JSON format in RocksDB instead of the plain-text JSON. This means less storage and faster deserialization.
There are still some inefficiencies left here. I plan to optimize them after we develop a functioning DocumentDB. That way we can move and iterate faster.
Test Plan: added a unit test
Reviewers: dhruba, haobo, sdong, ljin, yhchiang
Reviewed By: haobo
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D18831
Summary: We have a lot of problems with gflags. However, when compiling rocksdb static library, we don't need gflags dependency. Reorganize INSTALL.md such that first-time customers don't need any dependency installed to actually build rocksdb static library.
Test Plan: none
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18501
Summary:
db_test includes Benchmark for LogAndApply. This diff removes it from db_test and puts it into a separate log_and_apply bench. I just wanted to play around with our new benchmark framework and figure out how it works.
I would also like to show you how great it is! I believe right set of microbenchmarks can speed up our productivity a lot and help catch early regressions.
Test Plan: no
Reviewers: dhruba, haobo, sdong, ljin, yhchiang
Reviewed By: yhchiang
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18261
Summary: Added benchmark functionality on the lines of folly/Benchmark.h
Test Plan: Added unit tests
Reviewers: igor, haobo, sdong, ljin, yhchiang, dhruba
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17973
Summary:
The file tree structure in Version is prebuilt and the range of each file is known.
On the Get() code path, we do binary search in FindFile() by comparing
target key with each file's largest key and also check the range for each L0 file.
With some pre-calculated knowledge, each key comparision that has been done can serve
as a hint to narrow down further searches:
(1) If a key falls within a L0 file's range, we can safely skip the next
file if its range does not overlap with the current one.
(2) If a key falls within a file's range in level L0 - Ln-1, we should only
need to binary search in the next level for files that overlap with the current one.
(1) will be able to skip some files depending one the key distribution.
(2) can greatly reduce the range of binary search, especially for bottom
levels, given that one file most likely only overlaps with N files from
the level below (where N is max_bytes_for_level_multiplier). So on level
L, we will only look at ~N files instead of N^L files.
Some inital results: measured with 500M key DB, when write is light (10k/s = 1.2M/s), this
improves QPS ~7% on top of blocked bloom. When write is heavier (80k/s =
9.6M/s), it gives us ~13% improvement.
Test Plan: make all check
Reviewers: haobo, igor, dhruba, sdong, yhchiang
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17205
Summary:
Add a skeleton binding and test for BackupableDB which shows that BackupableDB
and RocksDB can share the same JNI calls.
Test Plan:
make rocksdbjava
make jtest
Reviewers: haobo, ankgup87, sdong, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17793
Summary:
We don't really need sync_point.o if we're compiling with NDEBUG.
This diff depends on D17823
Test Plan: compiles
Reviewers: haobo, ljin, sdong
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17829
Summary:
Introducing RocksDBLite! Removes all the non-essential features and reduces the binary size. This effort should help our adoption on mobile.
Binary size when compiling for IOS (`TARGET_OS=IOS m static_lib`) is down to 9MB from 15MB (without stripping)
Test Plan: compiles :)
Reviewers: dhruba, haobo, ljin, sdong, yhchiang
Reviewed By: yhchiang
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17835
Summary:
This is first step of my effort to reduce size of librocksdb.a for use in mobile.
ldb object files are huge and are ment to be used as a command line tool. I moved them to `tools/` directory and include them only when compiling `ldb`
This diff reduced librocksdb.a from 42MB to 39MB on my mac (not stripped).
Test Plan: ran ldb
Reviewers: dhruba, haobo, sdong, ljin, yhchiang
Reviewed By: yhchiang
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17823
Summary:
* Add a benchmark for java binding for rocksdb. The java benchmark
is a complete rewrite based on the c++ db/db_bench.cc and the
DbBenchmark in dain's java leveldb.
* Support multithreading.
* 'readseq' is currently not supported as it requires RocksDB Iterator.
* usage:
--benchmarks
Comma-separated list of operations to run in the specified order
Actual benchmarks:
fillseq -- write N values in sequential key order in async mode
fillrandom -- write N values in random key order in async mode
fillbatch -- write N/1000 batch where each batch has 1000 values
in random key order in sync mode
fillsync -- write N/100 values in random key order in sync mode
fill100K -- write N/1000 100K values in random order in async mode
readseq -- read N times sequentially
readrandom -- read N times in random order
readhot -- read N times in random order from 1% section of DB
Meta Operations:
delete -- delete DB
DEFAULT: [fillseq, readrandom, fillrandom]
--compression_ratio
Arrange to generate values that shrink to this fraction of
their original size after compression
DEFAULT: 0.5
--use_existing_db
If true, do not destroy the existing database. If you set this
flag and also specify a benchmark that wants a fresh database, that benchmark will fail.
DEFAULT: false
--num
Number of key/values to place in database.
DEFAULT: 1000000
--threads
Number of concurrent threads to run.
DEFAULT: 1
--reads
Number of read operations to do. If negative, do --nums reads.
--key_size
The size of each key in bytes.
DEFAULT: 16
--value_size
The size of each value in bytes.
DEFAULT: 100
--write_buffer_size
Number of bytes to buffer in memtable before compacting
(initialized to default value by 'main'.)
DEFAULT: 4194304
--cache_size
Number of bytes to use as a cache of uncompressed data.
Negative means use default settings.
DEFAULT: -1
--seed
Seed base for random number generators.
DEFAULT: 0
--db
Use the db with the following name.
DEFAULT: /tmp/rocksdbjni-bench
* Add RocksDB.write().
Test Plan: make jbench
Reviewers: haobo, sdong, dhruba, ankgup87
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17433
Summary: This will allow us to disable them completely for iOS or for better performance
Test Plan: will run make all check
Reviewers: igor, haobo, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17511
Summary:
I had to make number of changes to the code and Makefile:
* Add `make lib`, that will create static library without debug info. We need this to avoid growing binary too much. Currently it's 14MB.
* Remove cpuinfo() function and use __SSE4_2__ macro. We actually used the macro as part of Fast_CRC32() function.
As a result, I also accidentally fixed this issue: https://www.facebook.com/groups/rocksdb.dev/permalink/549700778461774/?stream_ref=2
* Remove __thread locals in OS_MACOSX
Test Plan: `make lib PLATFORM=IOS`
Reviewers: ljin, haobo, dhruba, sdong
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17475
Summary:
* Add java api for rocksdb::WriteBatch and rocksdb::WriteOptions, which are necessary components
for running benchmark.
* Add java test for org.rocksdb.WriteBatch and org.rocksdb.WriteOptions.
* Add remove() to org.rocksdb.RocksDB, and add put() and remove() to RocksDB which take
org.rocksdb.WriteOptions.
Test Plan: make jtest
Reviewers: haobo, sdong, dhruba
Reviewed By: sdong
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17373
Summary:
* [java] Add a java api for rocksdb::Options, currently only supports create_if_missing.
* [java] Add a test for RocksDBException in RocksDBSample.
Test Plan: make jtest
Reviewers: haobo, sdong
Reviewed By: haobo
CC: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D17385
Summary:
This patch stores gps locations in rocksdb.
Each object is uniquely identified by an id. Each object has
a gps (latitude, longitude) associated with it. The geodb
supports looking up an object either by its gps location
or by its id. There is a method to retrieve all objects
within a circular radius centered at a specified gps location.
Test Plan: Simple unit-test attached.
Reviewers: leveldb, haobo
Reviewed By: haobo
CC: leveldb, tecbot, haobo
Differential Revision: https://reviews.facebook.net/D15567
Summary:
This diff contains a simple jni library for rocksdb which supports open, get,
put and closeusing default options (including Options, ReadOptions, and
WriteOptions.) In the usual case, Java developers can use the c++ rocksdb
library in the way similar to the following:
RocksDB db = RocksDB.open(path_to_db);
...
db.put("hello".getBytes(), "world".getBytes();
byte[] value = db.get("hello".getBytes());
...
db.close();
Specifically, this diff has the following major classes:
* RocksDB: a Java wrapper class which forwards the operations
from the java side to c++ rocksdb library.
* RocksDBException: ncapsulates the error of an operation.
This exception type is used to describe an internal error from
the c++ rocksdb library.
This diff also include a simple java sample code calling c++ rocksdb library.
To build the rocksdb jni library, simply run make jni, and make jtest will try to
build and run the sample code.
Note that if the rocksdb is not built with the default glibc that Java uses,
java will try to load the wrong glibc during the run time. As a result,
the sample code might not work properly during the run time.
Test Plan:
* make jni
* make jtest
Reviewers: haobo, dhruba, sdong, igor, ljin
Reviewed By: dhruba
CC: leveldb, xjin
Differential Revision: https://reviews.facebook.net/D17109
Summary:
@kailiu mentioned on meeting yesterday that we sometimes have trouble opening DB created by old version with the new version. This will be very important to test for column families, since I'm changing disk format for the MANIFEST.
I added a tool that can help us test that. Usage:
./db_sanity_test <path> create
will create a bunch of DBs under <path>
<change RocksDB version>
./db_sanity_test <path> verify
will verify consistency of DBs created under <path>
Test Plan: ran the db_sanity_test
Reviewers: kailiu, dhruba, haobo
Reviewed By: kailiu
CC: leveldb, kailiu, xjin
Differential Revision: https://reviews.facebook.net/D16605
Summary:
this is the key component extracted from diff: https://reviews.facebook.net/D14271
I separate it to a dedicated patch to make the review easier.
Test Plan: added a unit test and passed it.
Reviewers: haobo, sdong, dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16245
Summary:
This is not a generic thread local implementation in the sense that it
only takes pointer. But it does support multiple instances per thread
and lets user plugin function to perform cleanup when thread exits or an
instance gets destroyed.
Test Plan: unit test for now
Reviewers: haobo, igor, sdong, dhruba
Reviewed By: igor
CC: leveldb, kailiu
Differential Revision: https://reviews.facebook.net/D16131
Summary: A simple benchmark that simulates WAL append. It can be used to test different platform/file system's performance on WAL.
Test Plan: run it.
Reviewers: haobo, kailiu
Reviewed By: haobo
CC: igor, dhruba, i.am.jin.lei, yhchiang, leveldb, nkg-
Differential Revision: https://reviews.facebook.net/D16239
Summary:
Add a test to verify HashLinkList and HashSkipList (mainly for the former one) returns the correct results when inserting the same bucket in the different orders.
Some other changes:
(1) add the test to test list
(2) fix compile error
(3) add header
Test Plan: ./prefix_test
Reviewers: haobo, kailiu
Reviewed By: haobo
CC: igor, yhchiang, i.am.jin.lei, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D16143
Summary: Fix table_reader_bench after some interface changes. Add it to make to avoid future breaking
Test Plan: make table_reader_bench and run it with different options.
Reviewers: kailiu, haobo
Reviewed By: haobo
CC: igor, leveldb
Differential Revision: https://reviews.facebook.net/D16107
Summary: To speed up the compilation while allowing us to compile in debug mode.
Test Plan:
make: see -O2 enabled
make dbg: didn't see -O2
Reviewers: igor
Reviewed By: igor
CC: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D15969
Summary:
In new third-party release tool, `LIBNAME=<customized_library> make`
will not really change the LIBNAME.
However it's very odd that the same approach works with old third-party
release tools. I checked previous rocksdb version and both librocksdb.a
and librocksdb_debug.a were correctly generated and copied to the
right place.
Test Plan:
`LIBNAME=hello make -j32` generates hello.a
`make -j32` generates librocksdb.a
Reviewers: igor, sdong, haobo, dhruba
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15555
Summary:
Previous we made `make release` also compile shared library. However it takes a long time to complete.
To make our development process more efficient. I added a new make target shared_lib.
User can of course run `make <library_name>` for direct compilation. However the <library_name> changed under certain condition. Thus we need `make shared_lib` to get rid of the memorization from users' side.
Test Plan: make shared_lib
Reviewers: igor, sdong, haobo, dhruba
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15309
Compiling the shared libraries took a long time. Thus to speed up the development speed, it still makes sense to be separated from regular compilation.
Summary:
Added a script that reformat only the affected lines in a given diff.
I planned to make that file as pre-commit hook but looks it's a little bit more difficult than I thought. Since I don't want to spend too much time on this task right now, I eventually added a "make command" to achieve this with a few additional key strokes.
Also make the clang-format solely inherited from Google's style -- there are still debates on some of the style issues, but we can address them later once we reach a consensus.
Test Plan: Did some ugly format change and ran "make format", all affected lines are formatted as expected.
Reviewers: igor, sdong, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15147
Summary:
Per request, some users need to use dynamic rocksdb library instead of static one.
However currently the dynamic libraries have to be manually compiled by default, which is inconvenient. I made dymamic libraries to be compiled by default.
Test Plan: make clean; make; make clean;
Reviewers: haobo, sdong, dhruba, igor
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15117
Summary:
This diff provides basic implementations of CreateColumnFamily(), DropColumnFamily() and ListColumnFamilies(). It builds on top of https://reviews.facebook.net/D14733
It also includes a bug fix for DBImplReadOnly, where Get implementation would be redirected to DBImpl instead of DBImplReadOnly.
Test Plan: Added unit test
Reviewers: dhruba, haobo, kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15021
Summary:
A vector that leverages pre-allocated stack-based array to achieve better
performance for array with small amount of items.
Test Plan:
Added tests for both correctness and performance
Here is the performance benchmark between vector and autovector
Please note that in the test "Creation and Insertion Test", the test case were designed with the motivation described below:
* no element inserted: internal array of std::vector may not really get
initialize.
* one element inserted: internal array of std::vector must have
initialized.
* kSize elements inserted. This shows the most time we'll spend if we
keep everything in stack.
* 2 * kSize elements inserted. The internal vector of
autovector must have been initialized.
Note: kSize is the capacity of autovector
=====================================================
Creation and Insertion Test
=====================================================
created 100000 vectors:
each was inserted with 0 elements
total time elapsed: 128000 (ns)
created 100000 autovectors:
each was inserted with 0 elements
total time elapsed: 3641000 (ns)
created 100000 VectorWithReserveSizes:
each was inserted with 0 elements
total time elapsed: 9896000 (ns)
-----------------------------------
created 100000 vectors:
each was inserted with 1 elements
total time elapsed: 11089000 (ns)
created 100000 autovectors:
each was inserted with 1 elements
total time elapsed: 5008000 (ns)
created 100000 VectorWithReserveSizes:
each was inserted with 1 elements
total time elapsed: 24271000 (ns)
-----------------------------------
created 100000 vectors:
each was inserted with 4 elements
total time elapsed: 39369000 (ns)
created 100000 autovectors:
each was inserted with 4 elements
total time elapsed: 10121000 (ns)
created 100000 VectorWithReserveSizes:
each was inserted with 4 elements
total time elapsed: 28473000 (ns)
-----------------------------------
created 100000 vectors:
each was inserted with 8 elements
total time elapsed: 75013000 (ns)
created 100000 autovectors:
each was inserted with 8 elements
total time elapsed: 18237000 (ns)
created 100000 VectorWithReserveSizes:
each was inserted with 8 elements
total time elapsed: 42464000 (ns)
-----------------------------------
created 100000 vectors:
each was inserted with 16 elements
total time elapsed: 102319000 (ns)
created 100000 autovectors:
each was inserted with 16 elements
total time elapsed: 76724000 (ns)
created 100000 VectorWithReserveSizes:
each was inserted with 16 elements
total time elapsed: 68285000 (ns)
-----------------------------------
=====================================================
Sequence Access Test
=====================================================
performed 100000 sequence access against vector
size: 4
total time elapsed: 198000 (ns)
performed 100000 sequence access against autovector
size: 4
total time elapsed: 306000 (ns)
-----------------------------------
performed 100000 sequence access against vector
size: 8
total time elapsed: 565000 (ns)
performed 100000 sequence access against autovector
size: 8
total time elapsed: 512000 (ns)
-----------------------------------
performed 100000 sequence access against vector
size: 16
total time elapsed: 1076000 (ns)
performed 100000 sequence access against autovector
size: 16
total time elapsed: 1070000 (ns)
-----------------------------------
Reviewers: dhruba, haobo, sdong, chip
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14655
Summary:
db_test should be the first to execute because it finds the most bugs.
Also, when third parties report issues, we don't want ldb error message, we prefer to have db_test error message. For example, see thread: https://github.com/facebook/rocksdb/issues/25
Test Plan: make check
Reviewers: dhruba, haobo, kailiu
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14715
Summary: as title
Test Plan: dynamic_bloom_test
Reviewers: dhruba, sdong, kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14385
Summary:
In this diff I present you BackupableDB v1. You can easily use it to backup your DB and it will do incremental snapshots for you.
Let's first describe how you would use BackupableDB. It's inheriting StackableDB interface so you can easily construct it with your DB object -- it will add a method RollTheSnapshot() to the DB object. When you call RollTheSnapshot(), current snapshot of the DB will be stored in the backup dir. To restore, you can just call RestoreDBFromBackup() on a BackupableDB (which is a static method) and it will restore all files from the backup dir. In the next version, it will even support automatic backuping every X minutes.
There are multiple things you can configure:
1. backup_env and db_env can be different, which is awesome because then you can easily backup to HDFS or wherever you feel like.
2. sync - if true, it *guarantees* backup consistency on machine reboot
3. number of snapshots to keep - this will keep last N snapshots around if you want, for some reason, be able to restore from an earlier snapshot. All the backuping is done in incremental fashion - if we already have 00010.sst, we will not copy it again. *IMPORTANT* -- This is based on assumption that 00010.sst never changes - two files named 00010.sst from the same DB will always be exactly the same. Is this true? I always copy manifest, current and log files.
4. You can decide if you want to flush the memtables before you backup, or you're fine with backing up the log files -- either way, you get a complete and consistent view of the database at a time of backup.
5. More things you can find in BackupableDBOptions
Here is the directory structure I use:
backup_dir/CURRENT_SNAPSHOT - just 4 bytes holding the latest snapshot
0, 1, 2, ... - files containing serialized version of each snapshot - containing a list of files
files/*.sst - sst files shared between snapshots - if one snapshot references 00010.sst and another one needs to backup it from the DB, it will just reference the same file
files/ 0/, 1/, 2/, ... - snapshot directories containing private snapshot files - current, manifest and log files
All the files are ref counted and deleted immediatelly when they get out of scope.
Some other stuff in this diff:
1. Added GetEnv() method to the DB. Discussed with @haobo and we agreed that it seems right thing to do.
2. Fixed StackableDB interface. The way it was set up before, I was not able to implement BackupableDB.
Test Plan:
I have a unittest, but please don't look at this yet. I just hacked it up to help me with debugging. I will write a lot of good tests and update the diff.
Also, `make asan_check`
Reviewers: dhruba, haobo, emayanke
Reviewed By: dhruba
CC: leveldb, haobo
Differential Revision: https://reviews.facebook.net/D14295
Summary:
A Simple plain table format. No block structure. When creating the table reader, scanning the full table to create indexes.
Test Plan:Add unit test
Reviewers:haobo,dhruba,kailiu
CC:
Task ID: #
Blame Rev:
Summary: Add asan_check rule to Makefile. After we add this, we will create Jenkins run that will check for asan errors!
Test Plan: make asan_check
Reviewers: dhruba, kailiu, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14205
Summary:
The primary motivation of the changes is to make it easier to figure out the inside of the tables.
* rename "table stats" to "table properties" since now we have more than "integers" to store in the property block.
* Add filter block size to the basic table properties.
* Whenever a table is built, we'll log the table properties (the sample output is in Test Plan).
* Make an api to expose deleted keys.
Test Plan:
Passed all existing test. and the sample output of table stats:
==================================================================
Basic Properties
------------------------------------------------------------------
# data blocks: 1
# entries: 1
raw key size: 9
raw average key size: 9
raw value size: 9
raw average value size: 0
data block size: 25
index block size: 27
filter block size: 18
(estimated) table size: 70
filter policy: rocksdb.BuiltinBloomFilter
==================================================================
User collected properties: InternalKeyPropertiesCollector
------------------------------------------------------------------
kDeletedKeys: 1
==================================================================
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14187
Summary:
1. Moved the compiler back to 4.8.1 and uses Centos 5.2 binaries if OS is Centos 5.2.
2. Fixes this issue: https://github.com/facebook/rocksdb/issues/7
3. We use lot of c++11 features, so we can't pretend we can compile without them. Makes it a first class dependency.
4. Fix blob_store_test, which failes on Ubuntu with "too many files opened" error
5. Removed dependency on port/port_chromium.h, which does not even exist on our system
Test Plan: make clean; make check
Reviewers: dhruba, kailiu
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14145
Summary: This diff invoves some more complicated issues in the posix environment.
Test Plan: works under mac os. will need to verify dev box.
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14061
Summary: The work to make sure mac os compiles rocksdb is not completed yet. But at least we can start cleaning some warnings captured only by g++ from mac os..
Test Plan: ran make in mac os
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14049
Summary: as title, half baked test for prefixhash memtable. Also contains deadlock test option
Test Plan: run it
Reviewers: igor, dhruba
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13887
Summary: It is a very simple benchmark to measure a Table implementation's Get() and iterator performance if all the data is in memory.
Test Plan: N/A
Reviewers: dhruba, haobo, kailiu
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13743
Summary: This patch makes Table and TableBuilder a abstract class and make all the implementation of the current table into BlockedBasedTable and BlockedBasedTable Builder.
Test Plan: Make db_test.cc to work with block based table. Add a new test simple_table_db_test.cc where a different simple table format is implemented.
Reviewers: dhruba, haobo, kailiu, emayanke, vamsi
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13521
Summary:
1. Added a new option that support user-defined table stats collection.
2. Added a deleted key stats collector in `utilities`
Test Plan:
Added a unit test for newly added code.
Also ran make check to make sure other tests are not broken.
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13491
Summary:
Finally, arc diff works again! This has been sitting in my repo for a while.
I would like some comments on my BlobStore benchmark. We don't have to check this in.
Also, I don't do any fsync in the BlobStore, so this is all extremely fast. I'm not sure what durability guarantees we need from the BlobStore.
Test Plan: Nope
Reviewers: dhruba, haobo, kailiu, emayanke
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13527
Summary:
Developing a capability for storing values on external backing file(s).
This is just a highly unoptimized first pass - supports:
1) Allocating some portion of external file to be used to store value
2) Freeing the range, enabling it to be reused by other values
As next steps, I plan to:
1) Create some kind of stress testing. Once I can measure stuff, I can focus on optimizing.
2) Optimize locking.
3) Optimize freelist data structure. Currently we have O(n) for both freeing and allocation.
4) Figure out how to do recovery.
Test Plan: Created a unit test.
Reviewers: dhruba, haobo, kailiu
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13389
Summary:
Jenkin reports errors that:
* Linking error on some machines. The error message shows it cannot find some gcov related symbols.
* lcov error due to the version issues.
Test Plan:
run make in different platforms
Reviewers:
CC:
Task ID: #
Blame Rev:
Summary: An api to query the level, key ranges, size etc for each SST file and an api to delete a specific file from the db and all associated state in the bookkeeping datastructures.
Notes: Editing the manifest version does not release the obsolete files right away. However deleting the file directly will mess up the iterator. We may need a more aggressive/timely file deletion api.
I have used std::unique_ptr - will switch to boost:: since this is external. thoughts?
Unit test is fragile right now as it expects the compaction at certain levels.
Test Plan: unittest
Reviewers: dhruba, vamsi, emayanke
CC: zshao, leveldb, haobo
Task ID: #
Blame Rev:
Summary: Previously, RocksDB's build scripts used relative pathnames like ./build_detect_platform. This can cause problems if the user uses CDPATH. Also, it just doesn't seem right to me.
Test Plan:
make clean
make -j32 check
Reviewers: MarkCallaghan, dhruba, kailiu
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12459
Summary:
-Added null checks and revisions to DBIter::MergeValuesNewToOld()
-Added DBIter test to stringappend_test
-Major fix with Merge and TTL
More plans for fixes later.
Test Plan:
-make clean; make stringappend_test -j 32; ./stringappend_test
-make all check;
Reviewers: haobo, emayanke, vamsi, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12315
Summary:
The flags is accidentally introduced, and resulted in problems in 3rd party release.
Test Plan:
run make in all platforms (when doing the 3rd party release)
Summary:
* Added LIBNAME to enable configurable library name.
* remove/check fPIC in linux platform from build_detect_platform
Test Plan: make
Reviewers: emayanke
Differential Revision: https://reviews.facebook.net/D12321
Summary: As Aaron suggested, there are quite some problems with our Makefile and scripts. So in this diff I did some cleanup for them and revise some part of the scripts/makefile to help people better understand some mysterious parts.
Test Plan:
Ran make in several modes;
Ran the updated scripts.
Reviewers: dhruba, emayanke, akushner
Differential Revision: https://reviews.facebook.net/D12285
Summary:
This patch adds the ability for the user to add sequences of arbitrary data (blobs) to write batches. These blobs are saved to the log along with everything else in the write batch. You can add multiple blobs per WriteBatch and the ordering of blobs, puts, merges, and deletes are preserved.
Blobs are not saves to SST files. RocksDB ignores blobs in every way except for writing them to the log.
Before committing this patch, I need to add some test code. But I'm submitting it now so people can comment on the API.
Test Plan: make -j32 check
Reviewers: dhruba, haobo, vamsi
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12195
Summary:
As title. No locking/atomic is needed due to thread local. There is also no need to modify the existing client interface, in order to expose related counters.
perf_context_test shows a simple example of retrieving the number of user key comparison done for each put and get call. More counters could be added later.
Sample output
./perf_context_test 1000000
==== Test PerfContextTest.KeyComparisonCount
Inserting 1000000 key/value pairs
...
total user key comparison get: 43446523
total user key comparison put: 8017877
max user key comparison get: 88939
avg user key comparison get:43
Basically, the current skiplist does well on average, but could perform poorly in extreme cases.
Test Plan: run perf_context_test <total number of entries to put/get>
Reviewers: dhruba
Differential Revision: https://reviews.facebook.net/D12225
Summary:
Ultimate goals of the coverage report are:
* Report the coverage for all files (done in this diff)
* Report the coverage for recently updated files (not fully finished)
* Report is available in html form (done in this diff, but need some extra work to integrate it in Jenkin)
Task link: https://our.intern.facebook.com/intern/tasks/?s=1154818042&t=2604914
Test Plan:
Ran: coverage/coverage_test.sh
The sample output can be found here: https://phabricator.fb.com/P2433892
Reviewers: dhruba, emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11943
Summary: did a find-replace
Test Plan: make
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11979
Summary: Currently, merge_test uses /tmp/testdb for the test database. It should really use something more specific to merge_test. Most of the other tests use test::TmpDir() + "/<test name>db". This patch implements such behavior for merge_test; it makes merge_test use test::TmpDir() + "/merge_testdb"
Test Plan:
make clean
make -j32 merge_test
./merge_test
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11877
Summary: rocksdb-2.0 released to third party
Test Plan: visual inspection
Reviewers: dhruba, haobo, sheki
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11559
Summary:
With the Makefile now updated to correctly update all .o files, this
should fix the issues recompiling stringappend_test. This should also fix the
"segmentation-fault" that we were getting earlier. Now, stringappend_test should
be clean, and I have added it back to the unit-tests. Also made some minor updates
to the tests themselves.
Test Plan:
1. make clean; make stringappend_test -j 32 (will test it by itself)
2. make clean; make all check -j 32 (to run all unit tests)
3. make clean; make release (test in release mode)
4. valgrind ./stringappend_test (valgrind tests)
Reviewers: haobo, jpaton, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11505
Summary:
The old Makefile did not remove ALL .o and .d files, but rather only
those that happened to be in the root folder and one-level deep. This was causing
issues when recompiling files in deeper folders. This fix now causes make clean
to find ALL .o and .d files via a unix "find" command, and then remove them.
Test Plan:
make clean;
make all -j 32;
Reviewers: haobo, jpaton, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11493
Summary:
I'm concerned about a random seg-fault that sometimes occurs when
running stringappend_test. I will investigate further. First, I am removing
stringappend_test from the regular release tests, and making some clean-ups
to the code.
Test Plan:
1. make stringappend_test
2. ./stringappend_test
Reviewers: haobo, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11313
Summary:
Completed the implementation for the Redis API for Lists.
The Redis API uses rocksdb as a backend to persistently
store maps from key->list. It supports basic operations
for appending, inserting, pushing, popping, and accessing
a list, given its key.
Test Plan:
- Compile with: make redis_test
- Test with: ./redis_test
- Run all unit tests (for all rocksdb) with: make all check
- To use an interactive REDIS client use: ./redis_test -m
- To clean the database before use: ./redis_test -m -d
Reviewers: haobo, dhruba, zshao
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10833
Summary:
I think the check for "error" that I added had caused
false alarm. Fixed that.
Test Plan:
Revert Plan: OK
Task ID: #
Reviewers: emayanke, dhruba
Reviewed By: emayanke
Differential Revision: https://reviews.facebook.net/D11139
