Summary:
min_log_number_to_keep denotes that the WALs whose numbers are below
this value **will** be deleted by RocksDB.
delete_wals_before will be used by RocksDB if
track_and_verify_wals_in_manifest is set to true. During recovery,
RocksDB uses the info encoded in delete_wals_before to reconstruct its
knowledge about what WALs to expect existing.
If these two tags are not encoded in the same VersionEdit, then it's
possible for min_log_number_to_keep=100 to exist, but
delete_wals_before=100 to be lost due to power failure. Subsequent
recovery will delete 99.log. If the db crashes again, the following
recovery will expect to see 99.log since there is no
delete_wals_before=100 in the MANIFEST, but the WAL is already deleted.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9766
Test Plan:
First of all, make check.
Second, format compatibility.
SHORT_TEST=1 ./tools/check_format_compatible.sh
Reviewed By: ltamasi
Differential Revision: D35203623
Pulled By: riversand963
fbshipit-source-id: 45623fc4b4b50d299d5e0f9559a3a4c5e9522c8f
Summary:
Right now we log a wrong error when DB::Open() fails. Fix it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9784
Test Plan: CI runs should pass
Reviewed By: ajkr, riversand963
Differential Revision: D35290203
fbshipit-source-id: ffc640afa27f6b0a2382ee153dc43f28d9e242be
Summary:
In making `SstFileMetaData` inherit from `FileStorageInfo`, I
overlooked setting some `FileStorageInfo` fields when then default
`SstFileMetaData()` ctor is used. This affected `GetLiveFilesMetaData()`.
Also removed some buggy `static_cast<size_t>`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9769
Test Plan: Updated tests
Reviewed By: jay-zhuang
Differential Revision: D35220383
Pulled By: pdillinger
fbshipit-source-id: 05b4ee468258dbd3699517e1124838bf405fe7f8
Summary:
After commit [d642c60](d642c60bdc), the stats `READ_BLOCK_COMPACTION_MICROS` cannot record any compaction read duration, and it always report zero.
This PR targets to distinguish `READ_BLOCK_COMPACTION_MICROS` with `READ_BLOCK_GET_MICROS` so that `READ_BLOCK_COMPACTION_MICROS` could record the correct stats.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9722
Reviewed By: ajkr
Differential Revision: D35021870
Pulled By: jay-zhuang
fbshipit-source-id: f1a804994265e51465de64c2a08f2e0eeb6fc5a3
Summary:
Although ColumnFamilySet comments say that DB mutex can be
freed during iteration, as long as you hold a ref while releasing DB
mutex, this is not quite true because UnrefAndTryDelete might delete cfd
right before it is needed to get ->next_ for the next iteration of the
loop.
This change solves the problem by making a wrapper class that makes such
iteration easier while handling the tricky details of UnrefAndTryDelete
on the previous cfd only after getting next_ in operator++.
FreeDeadColumnFamilies should already have been obsolete; this removes
it for good. Similarly, ColumnFamilySet::iterator doesn't need to check
for cfd with 0 refs, because those are immediately deleted.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9730
Test Plan:
was reported with ASAN on unit tests like
DBLogicalBlockSizeCacheTest.CreateColumnFamily (very rare); keep watching
Reviewed By: ltamasi
Differential Revision: D35038143
Pulled By: pdillinger
fbshipit-source-id: 0a5478d5be96c135343a00603711b7df43ae19c9
Summary:
There is a race condition if WAL tracking in the MANIFEST is enabled in a database that disables 2PC.
The race condition is between two background flush threads trying to install flush results to the MANIFEST.
Consider an example database with two column families: "default" (cfd0) and "cf1" (cfd1). Initially,
both column families have one mutable (active) memtable whose data backed by 6.log.
1. Trigger a manual flush for "cf1", creating a 7.log
2. Insert another key to "default", and trigger flush for "default", creating 8.log
3. BgFlushThread1 finishes writing 9.sst
4. BgFlushThread2 finishes writing 10.sst
```
Time BgFlushThread1 BgFlushThread2
| mutex_.Lock()
| precompute min_wal_to_keep as 6
| mutex_.Unlock()
| mutex_.Lock()
| precompute min_wal_to_keep as 6
| join MANIFEST write queue and mutex_.Unlock()
| write to MANIFEST
| mutex_.Lock()
| cfd1->log_number = 7
| Signal bg_flush_2 and mutex_.Unlock()
| wake up and mutex_.Lock()
| cfd0->log_number = 8
| FindObsoleteFiles() with job_context->log_number == 7
| mutex_.Unlock()
| PurgeObsoleteFiles() deletes 6.log
V
```
As shown in the above, BgFlushThread2 thinks that the min wal to keep is 6.log because "cf1" has unflushed data in 6.log (cf1.log_number=6).
Similarly, BgThread1 thinks that min wal to keep is also 6.log because "default" has unflushed data (default.log_number=6).
No WAL deletion will be written to MANIFEST because 6 is equal to `versions_->wals_.min_wal_number_to_keep`,
due to https://github.com/facebook/rocksdb/blob/7.1.fb/db/memtable_list.cc#L513:L514.
The bg flush thread that finishes last will perform file purging. `job_context.log_number` will be evaluated as 7, i.e.
the min wal that contains unflushed data, causing 6.log to be deleted. However, MANIFEST thinks 6.log should still exist.
If you close the db at this point, you won't be able to re-open it if `track_and_verify_wal_in_manifest` is true.
We must handle the case of multiple bg flush threads, and it is difficult for one bg flush thread to know
the correct min wal number until the other bg flush threads have finished committing to the manifest and updated
the `cfd::log_number`.
To fix this issue, we rename an existing variable `min_log_number_to_keep_2pc` to `min_log_number_to_keep`,
and use it to track WAL file deletion in non-2pc mode as well.
This variable is updated only 1) during recovery with mutex held, or 2) in the MANIFEST write thread.
`min_log_number_to_keep` means RocksDB will delete WALs below it, although there may be WALs
above it which are also obsolete. Formally, we will have [min_wal_to_keep, max_obsolete_wal]. During recovery, we
make sure that only WALs above max_obsolete_wal are checked and added back to `alive_log_files_`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9715
Test Plan:
```
make check
```
Also ran stress test below (with asan) to make sure it completes successfully.
```
TEST_TMPDIR=/dev/shm/rocksdb OPT=-g ASAN_OPTIONS=disable_coredump=0 \
CRASH_TEST_EXT_ARGS=--compression_type=zstd SKIP_FORMAT_BUCK_CHECKS=1 \
make J=52 -j52 blackbox_asan_crash_test
```
Reviewed By: ltamasi
Differential Revision: D34984412
Pulled By: riversand963
fbshipit-source-id: c7b21a8d84751bb55ea79c9f387103d21b231005
Summary:
Update stats in random_access_file_reader for Read and
ReadAsync API to take into account the read latency for async
prefetching.
It also fixes ERROR_HANDLER_AUTORESUME_RETRY_COUNT stat whose value was
incorrect in portal.h
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9810
Test Plan: Update unit test
Reviewed By: anand1976
Differential Revision: D35433081
Pulled By: akankshamahajan15
fbshipit-source-id: aeec3901270e58a003ce6b5214bd25ddcb3a12a9
Summary:
Currently RocksDB reset async_read_in_progress_ in callback
due to which underlying filesystem relying on Poll API won't be called
leading to stale memory access.
In order to fix it, async_read_in_progress_ will be reset after Poll API
is called to make sure underlying file_system waiting on Poll can clear
its state or take appropriate action.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9815
Test Plan: CircleCI tests
Reviewed By: anand1976
Differential Revision: D35451534
Pulled By: akankshamahajan15
fbshipit-source-id: b70ef6251a7aa9ed4876ba5e5100baa33d7d474c
Summary:
If FilePrefetchBuffer object is destroyed and then later Poll() calls callback on object which has been destroyed, it gives segfault on accessing destroyed object. It was caught after adding unit tests that tests Posix implementation of ReadAsync and Poll APIs.
This PR also updates and fixes existing IOURing tests which were not running locally because RocksDbIOUringEnable function wasn't defined and IOUring was disabled for those tests
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9777
Test Plan: Added new unit test
Reviewed By: anand1976
Differential Revision: D35254002
Pulled By: akankshamahajan15
fbshipit-source-id: 68e80054ffb14ae25c255920ebc6548ca5f130a1
Summary:
In ReadOption `async_io` which prefetches the data asynchronously, db_bench and db_stress runs were failing because wrong data was prefetched which resulted in Error: Checksum mismatched. Wrong data was copied because capacity was less than actual size needed. It has been fixed in this PR.
Since there are two separate methods for async and sync prefetching, these changes are in async prefetching methods and any changes would not effect normal prefetching. I ran the regressions to make sure normal prefetching is fine.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9734
Test Plan:
1. CircleCI jobs
2. Ran db_bench
```
. /db_bench -use_existing_db=true
-db=/tmp/prefix_scan_prefetch_main -benchmarks="seekrandom" -key_size=32
-value_size=512 -num=5000000 -use_direct_reads=true -seek_nexts=327680
-duration=120 -ops_between_duration_checks=1 -async_io=1 -adaptive_readahead=1
```
3. Ran db_stress test
```
export CRASH_TEST_EXT_ARGS=" --async_io=1 --adaptive_readahead=1"
make crash_test -j
```
4. Run regressions for async_io disabled.
Old flow without any async changes:
```
./db_bench -use_existing_db=true -db=/tmp/prefix_scan_prefetch_main -benchmarks="seekrandom" -key_size=32 -value_size=512 -num=5000000 -use_direct_reads=true -seek_nexts=327680 -duration=120 -ops_between_duration_checks=1
Initializing RocksDB Options from the specified file
Initializing RocksDB Options from command-line flags
RocksDB: version 7.0
Date: Thu Mar 17 13:11:34 2022
CPU: 24 * Intel Core Processor (Broadwell)
CPUCache: 16384 KB
Keys: 32 bytes each (+ 0 bytes user-defined timestamp)
Values: 512 bytes each (256 bytes after compression)
Entries: 5000000
Prefix: 0 bytes
Keys per prefix: 0
RawSize: 2594.0 MB (estimated)
FileSize: 1373.3 MB (estimated)
Write rate: 0 bytes/second
Read rate: 0 ops/second
Compression: Snappy
Compression sampling rate: 0
Memtablerep: SkipListFactory
Perf Level: 1
------------------------------------------------
DB path: [/tmp/prefix_scan_prefetch_main]
seekrandom : 483618.390 micros/op 2 ops/sec; 338.9 MB/s (249 of 249 found)
```
With async prefetching changes and async_io disabled to make sure in normal prefetching there is no regression.
```
./db_bench -use_existing_db=true -db=/tmp/prefix_scan_prefetch_main -benchmarks="seekrandom" -key_size=32 -value_size=512 -num=5000000 -use_direct_reads=true -seek_nexts=327680 -duration=120 -ops_between_duration_checks=1 --async_io=0
Initializing RocksDB Options from the specified file
Initializing RocksDB Options from command-line flags
RocksDB: version 7.1
Date: Wed Mar 23 15:56:37 2022
CPU: 24 * Intel Core Processor (Broadwell)
CPUCache: 16384 KB
Keys: 32 bytes each (+ 0 bytes user-defined timestamp)
Values: 512 bytes each (256 bytes after compression)
Entries: 5000000
Prefix: 0 bytes
Keys per prefix: 0
RawSize: 2594.0 MB (estimated)
FileSize: 1373.3 MB (estimated)
Write rate: 0 bytes/second
Read rate: 0 ops/second
Compression: Snappy
Compression sampling rate: 0
Memtablerep: SkipListFactory
Perf Level: 1
------------------------------------------------
DB path: [/tmp/prefix_scan_prefetch_main]
seekrandom : 481819.816 micros/op 2 ops/sec; 340.2 MB/s (250 of 250 found)
```
Reviewed By: riversand963
Differential Revision: D35058471
Pulled By: akankshamahajan15
fbshipit-source-id: 9233a1e6d97cea0c7a8111bfb9e8ac3251c341ce
Summary:
Bloom filters generated by pre-7.0 releases are not read by
7.0.x releases (and vice-versa) due to changes to FilterPolicy::Name()
in https://github.com/facebook/rocksdb/issues/9590. This can severely impact read performance and read I/O on
upgrade or downgrade with existing DB, but not data correctness.
To fix, we go back using the old, unified name in SST metadata but (for
a while anyway) recognize the aliases that could be generated by early
7.0.x releases. This unfortunately requires a public API change to avoid
interfering with all the good changes from https://github.com/facebook/rocksdb/issues/9590, but the API change
only affects users with custom FilterPolicy, which should be very few.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9736
Test Plan:
manual
Generate DBs with
```
./db_bench.7.0 -db=/dev/shm/rocksdb.7.0 -bloom_bits=10 -cache_index_and_filter_blocks=1 -benchmarks=fillrandom -num=10000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0
```
and similar. Compare with
```
for IMPL in 6.29 7.0 fixed; do for DB in 6.29 7.0 fixed; do echo "Testing $IMPL on $DB:"; ./db_bench.$IMPL -db=/dev/shm/rocksdb.$DB -use_existing_db -readonly -bloom_bits=10 -benchmarks=readrandom -num=10000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -duration=10 2>&1 | grep micros/op; done; done
```
Results:
```
Testing 6.29 on 6.29:
readrandom : 34.381 micros/op 29085 ops/sec; 3.2 MB/s (291999 of 291999 found)
Testing 6.29 on 7.0:
readrandom : 190.443 micros/op 5249 ops/sec; 0.6 MB/s (52999 of 52999 found)
Testing 6.29 on fixed:
readrandom : 40.148 micros/op 24907 ops/sec; 2.8 MB/s (249999 of 249999 found)
Testing 7.0 on 6.29:
readrandom : 229.430 micros/op 4357 ops/sec; 0.5 MB/s (43999 of 43999 found)
Testing 7.0 on 7.0:
readrandom : 33.348 micros/op 29986 ops/sec; 3.3 MB/s (299999 of 299999 found)
Testing 7.0 on fixed:
readrandom : 152.734 micros/op 6546 ops/sec; 0.7 MB/s (65999 of 65999 found)
Testing fixed on 6.29:
readrandom : 32.024 micros/op 31224 ops/sec; 3.5 MB/s (312999 of 312999 found)
Testing fixed on 7.0:
readrandom : 33.990 micros/op 29390 ops/sec; 3.3 MB/s (294999 of 294999 found)
Testing fixed on fixed:
readrandom : 28.714 micros/op 34825 ops/sec; 3.9 MB/s (348999 of 348999 found)
```
Just paying attention to order of magnitude of ops/sec (short test
durations, lots of noise), it's clear that with the fix we can read <= 6.29
& >= 7.0 at full speed, where neither 6.29 nor 7.0 can on both. And 6.29
release can properly read fixed DB at full speed.
Reviewed By: siying, ajkr
Differential Revision: D35057844
Pulled By: pdillinger
fbshipit-source-id: a46893a6af4bf084375ebe4728066d00eb08f050
Summary:
Changes:
* improves monitoring by displaying average size of a Put value and average scan length
* forces the minimum value size to be 10. Before this it was 0 if you didn't set the distribution parameters.
* uses reasonable defaults for the distribution parameters that determine value size and scan length
* includes seeks in "reads ... found" message, before this they were missing
This is for https://github.com/facebook/rocksdb/issues/9672
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9711
Test Plan:
Before this change:
./db_bench --benchmarks=fillseq,mixgraph --mix_get_ratio=50 --mix_put_ratio=25 --mix_seek_ratio=25 --num=100000 --value_k=0.2615 --value_sigma=25.45 --iter_k=2.517 --iter_sigma=14.236
fillseq : 4.289 micros/op 233138 ops/sec; 25.8 MB/s
mixgraph : 18.461 micros/op 54166 ops/sec; 755.0 MB/s ( Gets:50164 Puts:24919 Seek:24917 of 50164 in 75081 found)
After this change:
./db_bench --benchmarks=fillseq,mixgraph --mix_get_ratio=50 --mix_put_ratio=25 --mix_seek_ratio=25 --num=100000 --value_k=0.2615 --value_sigma=25.45 --iter_k=2.517 --iter_sigma=14.236
fillseq : 3.974 micros/op 251553 ops/sec; 27.8 MB/s
mixgraph : 16.722 micros/op 59795 ops/sec; 833.5 MB/s ( Gets:50164 Puts:24919 Seek:24917, reads 75081 in 75081 found, avg size: 36.0 value, 504.9 scan)
Reviewed By: jay-zhuang
Differential Revision: D35030190
Pulled By: mdcallag
fbshipit-source-id: d8f555f28d869f752ddb674a524108884511b151
Summary:
Multiplier here should be 1e6 to get microseconds.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9695
Reviewed By: ajkr
Differential Revision: D34897086
Pulled By: jay-zhuang
fbshipit-source-id: 9c1d0811ea740ba0a007edc2da199edbd000b88b
Summary:
In FilePrefetchBuffer if reads are sequential, after prefetching call ReadAsync API to prefetch data asynchronously so that in next prefetching data will be available. Data prefetched asynchronously will be readahead_size/2. It uses two buffers, one for synchronous prefetching and one for asynchronous. In case, the data is overlapping, the data is copied from both buffers to third buffer to make it continuous.
This feature is under ReadOptions::async_io and is under experimental.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9674
Test Plan:
1. Add new unit tests
2. Run **db_stress** to make sure nothing crashes.
- Normal prefetch without `async_io` ran successfully:
```
export CRASH_TEST_EXT_ARGS=" --async_io=0"
make crash_test -j
```
3. **Run Regressions**.
i) Main branch without any change for normal prefetching with async_io disabled:
```
./db_bench -db=/tmp/prefix_scan_prefetch_main -benchmarks="fillseq" -key_size=32 -value_size=512 -num=5000000 -
use_direct_io_for_flush_and_compaction=true -target_file_size_base=16777216
```
```
./db_bench -use_existing_db=true -db=/tmp/prefix_scan_prefetch_main -benchmarks="seekrandom" -key_size=32 -value_size=512 -num=5000000 -use_direct_reads=true -seek_nexts=327680 -duration=120 -ops_between_duration_checks=1
Initializing RocksDB Options from the specified file
Initializing RocksDB Options from command-line flags
RocksDB: version 7.0
Date: Thu Mar 17 13:11:34 2022
CPU: 24 * Intel Core Processor (Broadwell)
CPUCache: 16384 KB
Keys: 32 bytes each (+ 0 bytes user-defined timestamp)
Values: 512 bytes each (256 bytes after compression)
Entries: 5000000
Prefix: 0 bytes
Keys per prefix: 0
RawSize: 2594.0 MB (estimated)
FileSize: 1373.3 MB (estimated)
Write rate: 0 bytes/second
Read rate: 0 ops/second
Compression: Snappy
Compression sampling rate: 0
Memtablerep: SkipListFactory
Perf Level: 1
------------------------------------------------
DB path: [/tmp/prefix_scan_prefetch_main]
seekrandom : 483618.390 micros/op 2 ops/sec; 338.9 MB/s (249 of 249 found)
```
ii) normal prefetching after changes with async_io disable:
```
./db_bench -use_existing_db=true -db=/tmp/prefix_scan_prefetch_withchange -benchmarks="seekrandom" -key_size=32 -value_size=512 -num=5000000 -use_direct_reads=true -seek_nexts=327680 -duration=120 -ops_between_duration_checks=1
Initializing RocksDB Options from the specified file
Initializing RocksDB Options from command-line flags
RocksDB: version 7.0
Date: Thu Mar 17 14:11:31 2022
CPU: 24 * Intel Core Processor (Broadwell)
CPUCache: 16384 KB
Keys: 32 bytes each (+ 0 bytes user-defined timestamp)
Values: 512 bytes each (256 bytes after compression)
Entries: 5000000
Prefix: 0 bytes
Keys per prefix: 0
RawSize: 2594.0 MB (estimated)
FileSize: 1373.3 MB (estimated)
Write rate: 0 bytes/second
Read rate: 0 ops/second
Compression: Snappy
Compression sampling rate: 0
Memtablerep: SkipListFactory
Perf Level: 1
------------------------------------------------
DB path: [/tmp/prefix_scan_prefetch_withchange]
seekrandom : 471347.227 micros/op 2 ops/sec; 348.1 MB/s (255 of 255 found)
```
Reviewed By: anand1976
Differential Revision: D34731543
Pulled By: akankshamahajan15
fbshipit-source-id: 8e23aa93453d5fe3c672b9231ad582f60207937f
Summary:
The goal of this change is to allow changes to the "current" (in
FileSystem) file temperatures to feed back into DB metadata, so that
they can inform decisions and stats reporting. In part because of
modular code factoring, it doesn't seem easy to do this automagically,
where opening an SST file and observing current Temperature different
from expected would trigger a change in metadata and DB manifest write
(essentially giving the deep read path access to the write path). It is also
difficult to do this while the DB is open because of the limitations of
LogAndApply.
This change allows updating file temperature metadata on a closed DB
using an experimental utility function UpdateManifestForFilesState()
or `ldb update_manifest --update_temperatures`. This should suffice for
"migration" scenarios where outside tooling has placed or re-arranged DB
files into a (different) tiered configuration without going through
RocksDB itself (currently, only compaction can change temperature
metadata).
Some details:
* Refactored and added unit test for `ldb unsafe_remove_sst_file` because
of shared functionality
* Pulled in autovector.h changes from https://github.com/facebook/rocksdb/issues/9546 to fix SuperVersionContext
move constructor (related to an older draft of this change)
Possible follow-up work:
* Support updating manifest with file checksums, such as when a
new checksum function is used and want existing DB metadata updated
for it.
* It's possible that for some repair scenarios, lighter weight than
full repair, we might want to support UpdateManifestForFilesState() to
modify critical file details like size or checksum using same
algorithm. But let's make sure these are differentiated from modifying
file details in ways that don't suspect corruption (or require extreme
trust).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9683
Test Plan: unit tests added
Reviewed By: jay-zhuang
Differential Revision: D34798828
Pulled By: pdillinger
fbshipit-source-id: cfd83e8fb10761d8c9e7f9c020d68c9106a95554
Summary:
On CircleCI MacOS instances, we have been seeing the following assertion error:
```
Assertion failed: (alive_log_files_tail_ == alive_log_files_.rbegin()), function WriteToWAL, file /Users/distiller/project/db/db_impl/db_impl_write.cc, line 1213.
Received signal 6 (Abort trap: 6)
#0 0x1
https://github.com/facebook/rocksdb/issues/1 abort (in libsystem_c.dylib) + 120
https://github.com/facebook/rocksdb/issues/2 err (in libsystem_c.dylib) + 0
https://github.com/facebook/rocksdb/issues/3 rocksdb::DBImpl::WriteToWAL(rocksdb::WriteBatch const&, rocksdb::log::Writer*, unsigned long long*, unsigned long long*, rocksdb::Env::IOPriority, bool, bool) (in librocksdb.7.0.0.dylib) (db_impl_write.cc:1213)
https://github.com/facebook/rocksdb/issues/4 rocksdb::DBImpl::WriteToWAL(rocksdb::WriteThread::WriteGroup const&, rocksdb::log::Writer*, unsigned long long*, bool, bool, unsigned long long) (in librocksdb.7.0.0.dylib) (db_impl_write.cc:1251)
https://github.com/facebook/rocksdb/issues/5 rocksdb::DBImpl::WriteImpl(rocksdb::WriteOptions const&, rocksdb::WriteBatch*, rocksdb::WriteCallback*, unsigned long long*, unsigned long long, bool, unsigned long long*, unsigned long, rocksdb::PreReleaseCallback*) (in librocksdb.7.0.0.dylib) (db_impl_ rite.cc:421)
https://github.com/facebook/rocksdb/issues/6 rocksdb::DBImpl::Write(rocksdb::WriteOptions const&, rocksdb::WriteBatch*) (in librocksdb.7.0.0.dylib) (db_impl_write.cc:109)
https://github.com/facebook/rocksdb/issues/7 rocksdb::DB::Put(rocksdb::WriteOptions const&, rocksdb::ColumnFamilyHandle*, rocksdb::Slice const&, rocksdb::Slice const&, rocksdb::Slice const&) (in librocksdb.7.0.0.dylib) (db_impl_write.cc:2159)
https://github.com/facebook/rocksdb/issues/8 rocksdb::DBImpl::Put(rocksdb::WriteOptions const&, rocksdb::ColumnFamilyHandle*, rocksdb::Slice const&, rocksdb::Slice const&, rocksdb::Slice const&) (in librocksdb.7.0.0.dylib) (db_impl_write.cc:37)
https://github.com/facebook/rocksdb/issues/9 rocksdb::DB::Put(rocksdb::WriteOptions const&, rocksdb::Slice const&, rocksdb::Slice const&, rocksdb::Slice const&) (in librocksdb.7.0.0.dylib) (db.h:382)
https://github.com/facebook/rocksdb/issues/10 rocksdb::DBBasicTestWithTimestampPrefixSeek_IterateWithPrefix_Test::TestBody() (in db_with_timestamp_basic_test) (db_with_timestamp_basic_test.cc:2926)
https://github.com/facebook/rocksdb/issues/11 void testing::internal::HandleSehExceptionsInMethodIfSupported<testing::Test, void>(testing::Test*, void (testing::Test::*)(), char const*) (in db_with_timestamp_basic_test) (gtest-all.cc:3899)
https://github.com/facebook/rocksdb/issues/12 void testing::internal::HandleExceptionsInMethodIfSupported<testing::Test, void>(testing::Test*, void (testing::Test::*)(), char const*) (in db_with_timestamp_basic_test) (gtest-all.cc:3935)
https://github.com/facebook/rocksdb/issues/13 testing::Test::Run() (in db_with_timestamp_basic_test) (gtest-all.cc:3980)
https://github.com/facebook/rocksdb/issues/14 testing::TestInfo::Run() (in db_with_timestamp_basic_test) (gtest-all.cc:4153)
https://github.com/facebook/rocksdb/issues/15 testing::TestCase::Run() (in db_with_timestamp_basic_test) (gtest-all.cc:4266)
https://github.com/facebook/rocksdb/issues/16 testing::internal::UnitTestImpl::RunAllTests() (in db_with_timestamp_basic_test) (gtest-all.cc:6632)
https://github.com/facebook/rocksdb/issues/17 bool testing::internal::HandleSehExceptionsInMethodIfSupported<testing::internal::UnitTestImpl, bool>(testing::internal::UnitTestImpl*, bool (testing::internal::UnitTestImpl::*)(), char const*) (in db_with_timestamp_basic_test) (gtest-all.cc:3899)
https://github.com/facebook/rocksdb/issues/18 bool testing::internal::HandleExceptionsInMethodIfSupported<testing::internal::UnitTestImpl, bool>(testing::internal::UnitTestImpl*, bool (testing::internal::UnitTestImpl::*)(), char const*) (in db_with_timestamp_basic_test) (gtest-all.cc:3935)
https://github.com/facebook/rocksdb/issues/19 testing::UnitTest::Run() (in db_with_timestamp_basic_test) (gtest-all.cc:6242)
https://github.com/facebook/rocksdb/issues/20 RUN_ALL_TESTS() (in db_with_timestamp_basic_test) (gtest.h:22110)
https://github.com/facebook/rocksdb/issues/21 main (in db_with_timestamp_basic_test) (db_with_timestamp_basic_test.cc:3150)
https://github.com/facebook/rocksdb/issues/22 start (in libdyld.dylib) + 1
```
It's likely caused by concurrent, unprotected access to the deque, even though `back()` is never popped,
and we are comparing `rbegin()` with a cached `riterator`. To be safe, do the comparison only if we have mutex.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9717
Test Plan:
One example
Ssh to one CircleCI MacOS instance.
```
gtest-parallel -r 1000 -w 8 ./db_test --gtest_filter=DBTest.FlushesInParallelWithCompactRange
```
Reviewed By: pdillinger
Differential Revision: D34990696
Pulled By: riversand963
fbshipit-source-id: 62dd48ae6fedbda53d0a64d73de9b948b4c26eee
Summary:
The primary goal of this change is to add support for backing up and
restoring (applying on restore) file temperature metadata, without
committing to either the DB manifest or the FS reported "current"
temperatures being exclusive "source of truth".
To achieve this goal, we need to add temperature information to backup
metadata, which requires updated backup meta schema. Fortunately I
prepared for this in https://github.com/facebook/rocksdb/issues/8069, which began forward compatibility in version
6.19.0 for this kind of schema update. (Previously, backup meta schema
was not extensible! Making this schema update public will allow some
other "nice to have" features like taking backups with hard links, and
avoiding crc32c checksum computation when another checksum is already
available.) While schema version 2 is newly public, the default schema
version is still 1. Until we change the default, users will need to set
to 2 to enable features like temperature data backup+restore. New
metadata like temperature information will be ignored with a warning
in versions before this change and since 6.19.0. The metadata is
considered ignorable because a functioning DB can be restored without
it.
Some detail:
* Some renaming because "future schema" is now just public schema 2.
* Initialize some atomics in TestFs (linter reported)
* Add temperature hint support to SstFileDumper (used by BackupEngine)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9660
Test Plan:
related unit test majorly updated for the new functionality,
including some shared testing support for tracking temperatures in a FS.
Some other tests and testing hooks into production code also updated for
making the backup meta schema change public.
Reviewed By: ajkr
Differential Revision: D34686968
Pulled By: pdillinger
fbshipit-source-id: 3ac1fa3e67ee97ca8a5103d79cc87d872c1d862a
Summary:
The designed sync point may not be hit if trash file is generated faster
than deleting. Then the file will be deleted directly instead of waiting
for background trash empty thread to do it.
Increase SstFileManager Trash/DB ratio to avoid that.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9706
Test Plan:
`gtest-parallel ./delete_scheduler_test
--gtest_filter=DeleteSchedulerTest.StartBGEmptyTrashMultipleTimes -r
10000 -w 100`
It was likely to happen on one of the host.
Reviewed By: riversand963
Differential Revision: D34964735
Pulled By: jay-zhuang
fbshipit-source-id: bb78015489b5f6b3f11783aae7e5853ea197702c
Summary:
some Makefile refactoring to support Meta-internal workflows,
and add a basic crash_test flow to CircleCI
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9702
Test Plan: CI
Reviewed By: riversand963
Differential Revision: D34934315
Pulled By: pdillinger
fbshipit-source-id: 67f17280096d8968d8e44459293f72fb6fe339f3
Summary:
Fix and enhance the background error recovery logic to handle the
following situations -
1. Background read errors during flush/compaction (previously was
resulting in unrecoverable state)
2. Fix auto recovery failure on read/write errors during atomic flush.
It was failing due to a bug in setting the resuming_from_bg_err variable
in AtomicFlushMemTablesToOutputFiles.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9679
Test Plan: Add new unit tests in error_handler_fs_test
Reviewed By: riversand963
Differential Revision: D34770097
Pulled By: anand1976
fbshipit-source-id: 136da973a28d684b9c74bdf668519b0cbbbe1742
Summary:
In https://github.com/facebook/rocksdb/issues/9659, when `DisableManualCompaction()` is issued, the foreground
manual compaction thread does not have to wait background compaction
thread to finish. Which could be a problem that the user re-enable
manual compaction with `EnableManualCompaction()`, it may re-enable the
BG compaction which supposed be cancelled.
This patch makes the FG compaction wait on
`manual_compaction_state.done`, which either be set by BG compaction or
Unschedule callback. Then when FG manual compaction thread returns, it
should not have BG compaction running. So shared_ptr is no longer needed
for `manual_compaction_state`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9694
Test Plan: a StressTest and unittest
Reviewed By: ajkr
Differential Revision: D34885472
Pulled By: jay-zhuang
fbshipit-source-id: e6476175b43e8c59cd49f5c09241036a0716c274
Summary:
PR9686 makes `WriteToWAL()` call `assert(...!=rend())` while not holding
db mutex or log mutex. Another thread may concurrently call
`pop_front()`, causing race condition.
To fix, assert only if mutex is held.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9698
Test Plan: COMPILE_WITH_TSAN=1 make check
Reviewed By: jay-zhuang
Differential Revision: D34898535
Pulled By: riversand963
fbshipit-source-id: 1ddfa5bf1b6ae8d409cab6ff6e1b5321c6803da9
Summary:
In the original code, the value of `NO_FILE_OPENS` corresponding to the Ticker item will be increased regardless of whether the file is successfully opened or not. Even counts are repeated, which can lead to skewed counts.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9677
Reviewed By: jay-zhuang
Differential Revision: D34725733
Pulled By: ajkr
fbshipit-source-id: 841234ed03802c0105fd2107d82a740265ead576
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9686
According to https://www.cplusplus.com/reference/deque/deque/back/,
"
The container is accessed (neither the const nor the non-const versions modify the container).
The last element is potentially accessed or modified by the caller. Concurrently accessing or modifying other elements is safe.
"
Also according to https://www.cplusplus.com/reference/deque/deque/pop_front/,
"
The container is modified.
The first element is modified. Concurrently accessing or modifying other elements is safe (although see iterator validity above).
"
In RocksDB, we never pop the last element of `DBImpl::alive_log_files_`. We have been
exploiting this fact and the above two properties when ensuring correctness when
`DBImpl::alive_log_files_` may be accessed concurrently. Specifically, it can be accessed
in the write path when db mutex is released. Sometimes, the log_mute_ is held. It can also be accessed in `FindObsoleteFiles()`
when db mutex is always held. It can also be accessed
during recovery when db mutex is also held.
Given the fact that we never pop the last element of alive_log_files_, we currently do not
acquire additional locks when accessing it in `WriteToWAL()` as follows
```
alive_log_files_.back().AddSize(log_entry.size());
```
This is problematic.
Check source code of deque.h
```
back() _GLIBCXX_NOEXCEPT
{
__glibcxx_requires_nonempty();
...
}
pop_front() _GLIBCXX_NOEXCEPT
{
...
if (this->_M_impl._M_start._M_cur
!= this->_M_impl._M_start._M_last - 1)
{
...
++this->_M_impl._M_start._M_cur;
}
...
}
```
`back()` will actually call `__glibcxx_requires_nonempty()` first.
If `__glibcxx_requires_nonempty()` is enabled and not an empty macro,
it will call `empty()`
```
bool empty() {
return this->_M_impl._M_finish == this->_M_impl._M_start;
}
```
You can see that it will access `this->_M_impl._M_start`, racing with `pop_front()`.
Therefore, TSAN will actually catch the bug in this case.
To be able to use TSAN on our library and unit tests, we should always coordinate
concurrent accesses to STL containers properly.
We need to pass information about db mutex and log mutex into `WriteToWAL()`, otherwise
it's impossible to know which mutex to acquire inside the function.
To fix this, we can catch the tail of `alive_log_files_` by reference, so that we do not have to call `back()` in `WriteToWAL()`.
Reviewed By: pdillinger
Differential Revision: D34780309
fbshipit-source-id: 1def9821f0c437f2736c6a26445d75890377889b
Summary:
There was a mistake that incorrectly cast SstPartitionerFactory (missed shared pointer). It worked for database (correct cast), but not for family. Trying to set it in family has caused Access violation.
I have also added test and improved it. Older version was passing even without sst partitioner which is weird, because on Level1 we had two SST files with same key "aaaa1". I was not sure if it is a new feature and changed it to overlaping keys "aaaa0" - "aaaa2" overlaps "aaaa1".
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9622
Reviewed By: ajkr
Differential Revision: D34871968
Pulled By: pdillinger
fbshipit-source-id: a08009766da49fc198692a610e8beb19caf737e6
Summary:
https://github.com/facebook/rocksdb/issues/9625 didn't change the unschedule condition which was waiting for the background thread to clean-up the compaction.
make sure we only unschedule the task when it's scheduled.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9659
Reviewed By: ajkr
Differential Revision: D34651820
Pulled By: jay-zhuang
fbshipit-source-id: 23f42081b15ec8886cd81cbf131b116e0c74dc2f
Summary:
Timer crash when multiple DB instances doing heavy DB open and close
operations concurrently. Which is caused by adding a timer task with
smaller timestamp than the current running task. Fix it by moving the
getting new task timestamp part within timer mutex protection.
And other fixes:
- Disallow adding duplicated function name to timer
- Fix a minor memory leak in timer when a running task is cancelled
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9656
Reviewed By: ajkr
Differential Revision: D34626296
Pulled By: jay-zhuang
fbshipit-source-id: 6b6d96a5149746bf503546244912a9e41a0c5f6b
Summary:
As disscussed in (https://github.com/facebook/rocksdb/issues/9223), Here added a new API named DB::OpenAndTrimHistory, this API will open DB and trim data to the timestamp specofied by **trim_ts** (The data with newer timestamp than specified trim bound will be removed). This API should only be used at a timestamp-enabled db instance recovery.
And this PR implemented a new iterator named HistoryTrimmingIterator to support trimming history with a new API named DB::OpenAndTrimHistory. HistoryTrimmingIterator wrapped around the underlying InternalITerator such that keys whose timestamps newer than **trim_ts** should not be returned to the compaction iterator while **trim_ts** is not null.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9410
Reviewed By: ltamasi
Differential Revision: D34410207
Pulled By: riversand963
fbshipit-source-id: e54049dc234eccd673244c566b15df58df5a6236
Summary:
Provide support for Async Read and Poll in Posix file system using IOUring.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9578
Test Plan: In progress
Reviewed By: anand1976
Differential Revision: D34690256
Pulled By: akankshamahajan15
fbshipit-source-id: 291cbd1380a3cb904b726c34c0560d1b2ce44a2e
Summary:
Change the `MemPurge` code to address a failure during a crash test reported in https://github.com/facebook/rocksdb/issues/8958.
### Details and results of the crash investigation:
These failures happened in a specific scenario where the list of immutable tables was composed of 2 or more memtables, and the last memtable was the output of a previous `Mempurge` operation. Because the `PickMemtablesToFlush` function included a sorting of the memtables (previous PR related to the Mempurge project), and because the `VersionEdit` of the flush class is piggybacked onto a single one of these memtables, the `VersionEdit` was not properly selected and applied to the `VersionSet` of the DB. Since the `VersionSet` was not edited properly, the database was losing track of the SST file created during the flush process, which was subsequently deleted (and as you can expect, caused the tests to crash).
The following command consistently failed, which was quite convenient to investigate the issue:
`$ while rm -rf /dev/shm/single_stress && ./db_stress --clear_column_family_one_in=0 --column_families=1 --db=/dev/shm/single_stress --experimental_mempurge_threshold=5.493146827397074 --flush_one_in=10000 --reopen=0 --write_buffer_size=262144 --value_size_mult=33 --max_write_buffer_number=3 -ops_per_thread=10000; do : ; done`
### Solution proposed
The memtables are no longer sorted based on their `memtableID` in the `PickMemtablesToFlush` function. Additionally, the `next_log_number` of the memtable created as an output of the `Mempurge` function now takes in the correct value (the log number of the first memtable being mempurged). Finally, the VersionEdit object of the flush class now takes the maximum `next_log_number` of the stack of memtables being flushed, which doesnt change anything when Mempurge is `off` but becomes necessary when Mempurge is `on`.
### Testing of the solution
The following command no longer fails:
``$ while rm -rf /dev/shm/single_stress && ./db_stress --clear_column_family_one_in=0 --column_families=1 --db=/dev/shm/single_stress --experimental_mempurge_threshold=5.493146827397074 --flush_one_in=10000 --reopen=0 --write_buffer_size=262144 --value_size_mult=33 --max_write_buffer_number=3 -ops_per_thread=10000; do : ; done``
Additionally, I ran `db_crashtest` (`whitebox` and `blackbox`) for 2.5 hours with MemPurge on and did not observe any crash.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9671
Reviewed By: pdillinger
Differential Revision: D34697424
Pulled By: bjlemaire
fbshipit-source-id: d1ab675b361904351ac81a35c184030e52222874
Summary:
Fixes https://github.com/facebook/rocksdb/issues/9560. Only use popcnt intrinsic when HAVE_SSE42 is set. Also avoid setting it based on compiler test in portable builds because such test will pass on MSVC even without proper arch flags (ref: https://devblogs.microsoft.com/oldnewthing/20201026-00/?p=104397).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9680
Test Plan: verified the combinations of -DPORTABLE and -DFORCE_SSE42 produce expected compiler flags on Linux. Verified MSVC build using PORTABLE=1 (in CircleCI) does not set HAVE_SSE42.
Reviewed By: pdillinger
Differential Revision: D34739033
Pulled By: ajkr
fbshipit-source-id: d10456f3392945fc3e59430a1777840f7b60b276
Summary:
Integrate the streaming compress/uncompress API into WAL compression.
The streaming compression object is stored in the log_writer along with a reusable output buffer to store the compressed buffer(s).
The streaming uncompress object is stored in the log_reader along with a reusable output buffer to store the uncompressed buffer(s).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9642
Test Plan:
Added unit tests to verify different scenarios - large buffers, split compressed buffers, etc.
Future optimizations:
The overhead for small records is quite high, so it makes sense to compress only buffers above a certain threshold and use a separate record type to indicate that those records are compressed.
Reviewed By: anand1976
Differential Revision: D34709167
Pulled By: sidroyc
fbshipit-source-id: a37a3cd1301adff6152fb3fcd23726106af07dd4
