Summary:
auto_roll_logger_test relies on timing conditon that some operations finish within 1 seconds. This caused flaky tests. Move away from real timing and sleep and use fake time to verify the time-based rolling.
Closes https://github.com/facebook/rocksdb/pull/2066
Differential Revision: D4810647
Pulled By: siying
fbshipit-source-id: c54d994
Summary:
`uint` is nonstandard and not a built-in type on all compilers; replace it
with the always-valid `unsigned int`. I assume this went unnoticed because
it's inside an `#ifdef ROCKDB_JEMALLOC`.
Closes https://github.com/facebook/rocksdb/pull/2075
Differential Revision: D4820427
Pulled By: ajkr
fbshipit-source-id: 0876561
Summary:
Previously it always showed 0.0 for L0 write-amp because we were dividing by bytes read from non-output level. For L0, we should instead divide by bytes ingested to the DB. Note the numerator (bytes written to L0) includes flush bytes.
Closes https://github.com/facebook/rocksdb/pull/2078
Differential Revision: D4816902
Pulled By: ajkr
fbshipit-source-id: 7dca31a
Summary:
There still are many warnings (most of them about invalid printf format
for long long), but it builds if FAIL_ON_WARNINGS is disabled.
Closes https://github.com/facebook/rocksdb/pull/2052
Differential Revision: D4807355
Pulled By: siying
fbshipit-source-id: ef03786
Summary:
Operations like Seek/Next/Prev sometimes take too long to complete when there are many internal keys to be skipped. Adding an option, max_skippable_internal_keys -- which could be used to set a threshold for the maximum number of keys that can be skipped, will help to address these cases where it is much better to fail a request (as incomplete) than to wait for a considerable time for the request to complete.
This feature -- to fail an iterator seek request as incomplete, is disabled by default when max_skippable_internal_keys = 0. It is enabled only when max_skippable_internal_keys > 0.
This feature is based on the discussion mentioned in the PR https://github.com/facebook/rocksdb/pull/1084.
Closes https://github.com/facebook/rocksdb/pull/2000
Differential Revision: D4753223
Pulled By: sagar0
fbshipit-source-id: 1c973f7
Summary:
Add two DB properties: rocksdb.actual_delayed_write_rate and rocksdb.is_write_stooped, for people to know whether current writes are being throttled.
Closes https://github.com/facebook/rocksdb/pull/2043
Differential Revision: D4782975
Pulled By: siying
fbshipit-source-id: 6b2f5cf
Summary:
Allow the users to specify the target index partition size.
With this patch an index partition is cut before its estimated in-memory size goes above the configured value for metadata_block_size. The filter partitions are still cut right after an index partition is cut.
Closes https://github.com/facebook/rocksdb/pull/2041
Differential Revision: D4780216
Pulled By: maysamyabandeh
fbshipit-source-id: 95a0831
Summary:
I've added functions to the C API to support WriteBatchWithIndex as requested in #1833.
I've also added unit tests to c_test
I've implemented the WriteBatchWithIndex variation of every function available for regular WriteBatch. And added additional functions unique to WriteBatchWithIndex.
For now, the following is omitted:
1. The ability to create WriteBatchWithIndex's custom batch-only iterator as I'm not sure what its purpose is. It should be possible to add later if anyone wants it.
2. The ability to create the batch with a fallback comparator, since it appears to be unnecessary. I believe the column family comparator will be used for this, meaning those using a custom comparator can just use the column family variations.
Closes https://github.com/facebook/rocksdb/pull/1985
Differential Revision: D4760039
Pulled By: siying
fbshipit-source-id: 393227e
Summary:
MemTableInserter default constructs Post processing info
std::map. However, on Windows with 2015 STL the default
constructed map still dynamically allocates one node
which shows up on a profiler and we loose ~40% throughput
on fillrandom benchmark.
Solution: declare a map as std::aligned storage and optionally
construct.
This addresses https://github.com/facebook/rocksdb/issues/1976
Before:
-------------------------------------------------------------------
Initializing RocksDB Options from command-line flags
DB path: [k:\data\BulkLoadRandom_10M_fillonly]
fillrandom : 2.775 micros/op 360334 ops/sec; 280.4 MB/s
Microseconds per write:
Count: 10000000 Average: 2.7749 StdDev: 39.92
Min: 1 Median: 2.0826 Max: 26051
Percentiles: P50: 2.08 P75: 2.55 P99: 3.55 P99.9: 9.58 P99.99: 51.5**6
------------------------------------------------------
After:
Initializing RocksDB Options from command-line flags
DB path: [k:\data\BulkLoadRandom_10M_fillon
Closes https://github.com/facebook/rocksdb/pull/2011
Differential Revision: D4740823
Pulled By: siying
fbshipit-source-id: 1daaa2c
Summary:
Previously, when DB write buffer size triggers, we always pick the CF with most data in its memtable to flush. This approach can minimize total flush happens. Change the behavior to always pick the oldest unflushed CF, which makes it the same behavior when max_total_wal_size hits. This approach will minimize size used by max_total_wal_size.
Closes https://github.com/facebook/rocksdb/pull/1987
Differential Revision: D4703214
Pulled By: siying
fbshipit-source-id: 9ff8b09
Summary:
PinnableSlice
Summary:
Currently the point lookup values are copied to a string provided by the
user. This incures an extra memcpy cost. This patch allows doing point lookup
via a PinnableSlice which pins the source memory location (instead of
copying their content) and releases them after the content is consumed
by the user. The old API of Get(string) is translated to the new API
underneath.
Here is the summary for improvements:
value 100 byte: 1.8% regular, 1.2% merge values
value 1k byte: 11.5% regular, 7.5% merge values
value 10k byte: 26% regular, 29.9% merge values
The improvement for merge could be more if we extend this approach to
pin the merge output and delay the full merge operation until the user
actually needs it. We have put that for future work.
PS:
Sometimes we observe a small decrease in performance when switching from
t5452014 to this patch but with the old Get(string) API. The d
Closes https://github.com/facebook/rocksdb/pull/1756
Differential Revision: D4391738
Pulled By: maysamyabandeh
fbshipit-source-id: 6f3edd3
Summary:
The comparator param in SstFileWriter constructor is redundant as it already exists as a field in options. So the current SstFileWriter constructor should be deprecated in favor of a new one which does not take a comparator.
Note that the jni/java apis have not been touched yet.
Closes https://github.com/facebook/rocksdb/pull/1978
Differential Revision: D4685629
Pulled By: sagar0
fbshipit-source-id: 372ce96
Summary:
Add the flag --prefix to the sst_dump tool
This flag is similar to, and exclusive from, the --from flag.
--prefix=0x00FF will return all rows prefixed with 0x00FF.
The --to flag may also be specified and will work as expected.
These changes were used to help in debugging the power cycle corruption issue and theses changes were tested by scanning through a udb.
Closes https://github.com/facebook/rocksdb/pull/1984
Differential Revision: D4691814
Pulled By: reidHoruff
fbshipit-source-id: 027f261
Summary:
Fixing some bugs in MockEnv so it be actually used.
Closes https://github.com/facebook/rocksdb/pull/1914
Differential Revision: D4609923
Pulled By: maysamyabandeh
fbshipit-source-id: ca25735
Summary:
the 50%+ drained constraint wasn't working consistently in some of our test environments, maybe their resources are too low. relax the constraints a bit.
Closes https://github.com/facebook/rocksdb/pull/1970
Differential Revision: D4679419
Pulled By: ajkr
fbshipit-source-id: 3789cd8
Summary:
This PR is to support a way to iterate over all the keys that are just in memtables.
Closes https://github.com/facebook/rocksdb/pull/1953
Differential Revision: D4663500
Pulled By: sagar0
fbshipit-source-id: 144e177
Summary:
db_sst_test had been flaky occasionally in the following way: reached_max_space_on_compaction can in very rare cases be 0. This happens when the limit on maximum allowable space set using SetMaxAllowedSpaceUsage is hit during flush for all test db sizes (1,2,4,8 and 10MB).The fix clears the error returned when the the space limit is reached during flush. This ensures that the compaction call back will always be called. The runtime is increased slightly because the 1MB loop writes more data and hits the limit during multiple flushes until compaction is scheduled.
Closes https://github.com/facebook/rocksdb/pull/1861
Differential Revision: D4557396
Pulled By: lgalanis
fbshipit-source-id: ff778d1
Summary:
Relating to #1903:
In MaybeFlushColumnFamilies() we want to modify the 'getting_flushed' flag before releasing the db mutex when SwitchMemtable() is called.
The following 2 actions need to be atomic in MaybeFlushColumnFamilies()
- getting_flushed is false on oldest log
- we determine that all CFs can be flushed to successfully release oldest log
- we set getting_flushed = true on the oldest log.
-------
- getting_flushed is false on oldest log
- we determine that all CFs can NOT be flushed to successfully release oldest log
- we set unable_to_flush_oldest_log_ = true on the oldest log.
#### In the 2pc case:
T1 enters function but is unable to flush all CFs to release log
T1 sets unable_to_flush_oldest_log_ = true
T1 begins flushing all CFs possible
T2 enters function but is unable to flush all CFs to release log
T2 sees unable_to_flush_oldes_log_ has been set so exits
T3 enters function and will be able to flush all CFs to release oldest log
T3 sets getting_flushed = true on oldes
Closes https://github.com/facebook/rocksdb/pull/1909
Differential Revision: D4646235
Pulled By: reidHoruff
fbshipit-source-id: c8d0447
Summary:
Note: Using the default operator= is an unsafe approach for Options since it destructs shared_ptr in
the same order of their creation, in contrast to destructors which
destructs them in the opposite order of creation. One particular problme is
that the cache destructor might invoke callback functions that use Option
members such as statistics. To work around this problem, we manually call
destructor of table_facotry which eventually clears the block cache.
Closes https://github.com/facebook/rocksdb/pull/1950
Differential Revision: D4655473
Pulled By: maysamyabandeh
fbshipit-source-id: 6c4bbff
Summary:
fix when elapsed time spans non-integral number of intervals since the rate limiter may still be drained during a partial interval.
Closes https://github.com/facebook/rocksdb/pull/1948
Differential Revision: D4651304
Pulled By: ajkr
fbshipit-source-id: b1f9e70
Summary:
This is the metric I plan to use for adaptive rate limiting. The statistics are updated only if the rate limiter is drained by flush or compaction. I believe (but am not certain) that this is the normal case.
The Statistics object is passed in RateLimiter::Request() to avoid requiring changes to client code, which would've been necessary if we passed it in the RateLimiter constructor.
Closes https://github.com/facebook/rocksdb/pull/1946
Differential Revision: D4646489
Pulled By: ajkr
fbshipit-source-id: d8e0161
Summary:
This option is needed to be enabled for Direct IO
and I cannot think of a reason where we need to disable it
remove it and default it to true
Closes https://github.com/facebook/rocksdb/pull/1944
Differential Revision: D4641088
Pulled By: IslamAbdelRahman
fbshipit-source-id: d7085b9
Summary:
Avoid to run db_wal_test in all the DB test options, and some small changes.
Closes https://github.com/facebook/rocksdb/pull/1921
Differential Revision: D4622054
Pulled By: siying
fbshipit-source-id: 890fd64
Summary:
Separate the platform dependent tests from external_sst_file_test. Only those tests need to run on platforms like OSX
Closes https://github.com/facebook/rocksdb/pull/1923
Differential Revision: D4622461
Pulled By: siying
fbshipit-source-id: d2d6f04
Summary:
Separate a smal subset of tests in DBTest to DBBasicTest. Tests in DBTest don't have to run in CI tests on platforms like OSX, as long as they are covered by Linux.
Closes https://github.com/facebook/rocksdb/pull/1924
Differential Revision: D4616702
Pulled By: siying
fbshipit-source-id: 13e6549
Summary:
A previous fix to DBTestUniversalCompaction.UniversalCompactionTrivialMoveTest2 didn't address the right problem. The problem is L0->L0 compaction is not trivial move in the scenario, not parallel compactions. Fix this.
Closes https://github.com/facebook/rocksdb/pull/1911
Differential Revision: D4608955
Pulled By: siying
fbshipit-source-id: 7a712cb
Summary:
…action
The two options, min_partial_merge_operands and verify_checksums_in_compaction, are not seldom used. Remove them to reduce the total number of options. Also remove them from Java and C interface.
Closes https://github.com/facebook/rocksdb/pull/1902
Differential Revision: D4601219
Pulled By: siying
fbshipit-source-id: aad4cb2
Summary:
querying logical sector size from the device instead of hardcoding it for linux platform.
Closes https://github.com/facebook/rocksdb/pull/1875
Differential Revision: D4591946
Pulled By: ajkr
fbshipit-source-id: 4e9805c
Summary:
we occasionally missing this call so the file size will be wrong
Closes https://github.com/facebook/rocksdb/pull/1894
Differential Revision: D4598446
Pulled By: lightmark
fbshipit-source-id: 42b6ef5
Summary:
This is a trivial fix for OOMs we've seen a few days ago in logdevice.
RocksDB get into the following state:
(1) Write throughput is too high for flushes to keep up. Compactions are out of the picture - automatic compactions are disabled, and for manual compactions we don't care that much if they fall behind. We write to many CFs, with only a few L0 sst files in each, so compactions are not needed most of the time.
(2) total_log_size_ is consistently greater than GetMaxTotalWalSize(). It doesn't get smaller since flushes are falling ever further behind.
(3) Total size of memtables is way above db_write_buffer_size and keeps growing. But the write_buffer_manager_->ShouldFlush() is not checked because (2) prevents it (for no good reason, afaict; this is what this commit fixes).
(4) Every call to WriteImpl() hits the MaybeFlushColumnFamilies() path. This keeps flushing the memtables one by one in order of increasing log file number.
(5) No write stalling trigger is hit. We rely on max_write_buffer_number
Closes https://github.com/facebook/rocksdb/pull/1893
Differential Revision: D4593590
Pulled By: yiwu-arbug
fbshipit-source-id: af79c5f
Summary:
reimplement the compaction expansion on lower level.
Considering such a case:
input level file: 1[B E] 2[F G] 3[H I] 4 [J M]
output level file: 5[A C] 6[D K] 7[L O]
If we initially pick file 2, now we will compact file 2 and 6. But we can safely compact 2, 3 and 6 without expanding the output level.
The previous code is messy and wrong.
In this diff, I first determine the input range [a, b], and output range [c, d],
then we get the range [e,f] = [min(a, c), max(b, d] and put all eligible clean-cut files within [e, f] into this compaction.
**Note: clean-cut means the files don't have the same user key on the boundaries of some files that are not chosen in this compaction**.
Closes https://github.com/facebook/rocksdb/pull/1760
Differential Revision: D4395564
Pulled By: lightmark
fbshipit-source-id: 2dc2c5c
Summary:
The option has been deprecated for two years and has no effect. Removing.
Closes https://github.com/facebook/rocksdb/pull/1866
Differential Revision: D4555203
Pulled By: yiwu-arbug
fbshipit-source-id: c48f627
