Summary: It's usually hard for users to set a value of options.delayed_write_rate. With this diff, after slowdown condition triggers, we greedily reduce write rate if estimated pending compaction bytes increase. If estimated compaction pending bytes drop, we increase the write rate.
Test Plan:
Add a unit test
Test with db_bench setting:
TEST_TMPDIR=/dev/shm/ ./db_bench --benchmarks=fillrandom -num=10000000 --soft_pending_compaction_bytes_limit=1000000000 --hard_pending_compaction_bytes_limit=3000000000 --delayed_write_rate=100000000
and make sure without the commit, write stop will happen, but with the commit, it will not happen.
Reviewers: igor, anthony, rven, yhchiang, kradhakrishnan, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D52131
Summary:
When Get() or NewIterator() trigger file loads, skip caching the filter block if
(1) optimize_filters_for_hits is set and (2) the file is on the bottommost
level. Also skip checking filters under the same conditions, which means that
for a preloaded file or a file that was trivially-moved to the bottom level, its
filter block will eventually expire from the cache.
- added parameters/instance variables in various places in order to propagate the config ("skip_filters") from version_set to block_based_table_reader
- in BlockBasedTable::Rep, this optimization prevents filter from being loaded when the file is opened simply by setting filter_policy = nullptr
- in BlockBasedTable::Get/BlockBasedTable::NewIterator, this optimization prevents filter from being used (even if it was loaded already) by setting filter = nullptr
Test Plan:
updated unit test:
$ ./db_test --gtest_filter=DBTest.OptimizeFiltersForHits
will also run 'make check'
Reviewers: sdong, igor, paultuckfield, anthony, rven, kradhakrishnan, IslamAbdelRahman, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D51633
Summary:
Currently, transactions can fail even if there is no actual write conflict. This is due to relying on only the memtables to check for write-conflicts. Users have to tune memtable settings to try to avoid this, but it's hard to figure out exactly how to tune these settings.
With this diff, TransactionDB will use both memtables and SST files to determine if there are any write conflicts. This relies on the fact that BlockBasedTable stores sequence numbers for all writes that happen after any open snapshot. Also, D50295 is needed to prevent SingleDelete from disappearing writes (the TODOs in this test code will be fixed once the other diff is approved and merged).
Note that Optimistic transactions will still rely on tuning memtable settings as we do not want to read from SST while on the write thread. Also, memtable settings can still be used to reduce how often TransactionDB needs to read SST files.
Test Plan: unit tests, db bench
Reviewers: rven, yhchiang, kradhakrishnan, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb, yoshinorim
Differential Revision: https://reviews.facebook.net/D50475
Summary: Deprecate options.soft_rate_limit, which is hard to tune, with options.soft_pending_compaction_bytes_limit, which would trigger the slowdown if estimated pending compaction bytes exceeds the threshold. The hope is to make it more striaght-forward to tune.
Test Plan: Modify DBTest.SoftLimit to cover options.soft_pending_compaction_bytes_limit instead; run all unit tests.
Reviewers: IslamAbdelRahman, yhchiang, rven, kradhakrishnan, igor, anthony
Reviewed By: anthony
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D51117
Summary: crash_test sometimes fails, hitting the add file overlapping assert. Add information in info logs help us to find the bug.
Test Plan: Run all test suites. Do some manual tests to make sure printing is correct.
Reviewers: kradhakrishnan, yhchiang, anthony, IslamAbdelRahman, rven, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D49017
Summary: As above.
Test Plan: USE_CLANG=1 make check -j
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D48981
Summary: In MyRocks, it is sometimes important to get propeties only for the subset of the database. This diff implements the API in RocksDB.
Test Plan: ran the GetPropertiesOfTablesInRange
Reviewers: rven, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D48651
Summary:
Separate a new class InternalIterator from class Iterator, when the look-up is done internally, which also means they operate on key with sequence ID and type.
This change will enable potential future optimizations but for now InternalIterator's functions are still the same as Iterator's.
At the same time, separate the cleanup function to a separate class and let both of InternalIterator and Iterator inherit from it.
Test Plan: Run all existing tests.
Reviewers: igor, yhchiang, anthony, kradhakrishnan, IslamAbdelRahman, rven
Reviewed By: rven
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D48549
Summary:
Handle SST files with both ".sst" and ".ldb" suffix.
This enables user to migrate from leveldb to rocksdb.
Test Plan:
Added unit test with DB operating on SSTs with names schema.
See db/dc_test.cc:SSTsWithLdbSuffixHandling for details
Reviewers: yhchiang, sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D48003
Summary:
Add options.compaction_pri, which specifies the policy about which file to compact first.
kCompactionPriByLargestSeq will compact oldest files first.
Verified the behavior in db_bench but did not write unit tests yet. Also need to make it settable through option string and dynamically changeable.
Test Plan: Will write unit tests
Reviewers: igor, rven, anthony, kradhakrishnan, IslamAbdelRahman, yhchiang, MarkCallaghan
Reviewed By: yhchiang
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D45951
Summary:
Up to this point, the subcompactions that make up a compaction
job have been divided based on the key range of the L1 files, and each
subcompaction has handled the key range of only one file. However
DBOption.max_subcompactions allows the user to designate how many
subcompactions at most to perform. This patch updates the
CompactionJob::GetSubcompactionBoundaries() to determine these
divisions accordingly based on that option and other input/system factors.
The current approach orders the starting and/or ending keys of certain
compaction input files and then generates a histogram to approximate the
size covered by the key range between each consecutive pair of keys. Then
it groups these ranges into groups so that the sizes are approximately equal
to one another. The approach has also been adapted to work for universal
compaction as well instead of just for level-based compaction as it was before.
These subcompactions are then executed in parallel by locally spawning
threads, one for each. The results are then aggregated and the compaction
completed.
Test Plan: make all && make check
Reviewers: yhchiang, anthony, igor, noetzli, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43269
Summary:
This patch adds "rocksdb.aggregated-table-properties"
and "rocksdb.aggregated-table-properties-at-levelN", the former
returns the aggreated table properties of a column family,
while the later returns the aggregated table properties
of the specified level N.
Test Plan: Added tests in db_test
Reviewers: igor, sdong, IslamAbdelRahman, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D45087
Summary:
Add a counter of estimated bytes the DB needs to compact for all the compactions to finish. Expose it as a DB Property.
In the future, we can use threshold of this counter to replace soft rate limit and hard rate limit. A single threshold of estimated compaction debt in bytes will be easier for users to reason about when should slow down and stopping than more abstract soft and hard rate limits.
Test Plan: Add unit tests
Reviewers: IslamAbdelRahman, yhchiang, rven, kradhakrishnan, anthony, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D44205
Summary: Add a new DB property that calculate the total size of files used by all RocksDB Versions
Test Plan: Unittests for the new property
Reviewers: igor, yhchiang, anthony, rven, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D44799
Summary:
UpdateAccumulatedStats() is used to optimize compaction decision
esp. when the number of deletion entries are high, but this function
can slowdown DBOpen esp. in disk environment.
This patch adds DBOptions::skip_sats_update_on_db_open, which skips
UpdateAccumulatedStats() in DB::Open() time when it's set to true.
Test Plan: Add DBCompactionTest.SkipStatsUpdateTest
Reviewers: igor, anthony, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: tnovak, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42843
Summary:
Fixes T6548822. Added a new function for estimating the size of the live data
as proposed in the task. The value can be accessed through the property
rocksdb.estimate-live-data-size.
Test Plan:
There are two unit tests in version_set_test and a simple test in db_test.
make version_set_test && ./version_set_test;
make db_test && ./db_test gtest_filter=GetProperty
Reviewers: rven, igor, yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D41493
Summary:
When we first started, max_background_flushes was 0 by default and compaction thread was executing flushes (since there was no flush thread). Then, we switched the default max_background_flushes to 1. However, we still support the case where there is no flush thread and flushes are done in compaction. This is making our code a bit more complicated. By not supporting this use-case we can make our code simpler.
We have a special case that when you set max_background_flushes to 0, we
schedule the flush to execute on the compaction thread.
Test Plan: make check (there might be some unit tests that depend on this behavior)
Reviewers: IslamAbdelRahman, yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D41931
Summary:
This fixes the following scenario we've hit:
- we reached max_total_wal_size, created a new wal and scheduled flushing all memtables corresponding to the old one,
- before the last of these flushes started its column family was dropped; the last background flush call was a no-op; no one removed the old wal from alive_logs_,
- hours have passed and no flushes happened even though lots of data was written; data is written to different column families, compactions are disabled; old column families are dropped before memtable grows big enough to trigger a flush; the old wal still sits in alive_logs_ preventing max_total_wal_size limit from kicking in,
- a few more hours pass and we run out disk space because of one huge .log file.
Test Plan: `make check`; backported the new test, checked that it fails without this diff
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D40893
Summary:
This diff updates the logic of how we do trivial move, now trivial move can run on any number of files in input level as long as they are not overlapping
The conditions for trivial move have been updated
Introduced conditions:
- Trivial move cannot happen if we have a compaction filter (except if the compaction is not manual)
- Input level files cannot be overlapping
Removed conditions:
- Trivial move only run when the compaction is not manual
- Input level should can contain only 1 file
More context on what tests failed because of Trivial move
```
DBTest.CompactionsGenerateMultipleFiles
This test is expecting compaction on a file in L0 to generate multiple files in L1, this test will fail with trivial move because we end up with one file in L1
```
```
DBTest.NoSpaceCompactRange
This test expect compaction to fail when we force environment to report running out of space, of course this is not valid in trivial move situation
because trivial move does not need any extra space, and did not check for that
```
```
DBTest.DropWrites
Similar to DBTest.NoSpaceCompactRange
```
```
DBTest.DeleteObsoleteFilesPendingOutputs
This test expect that a file in L2 is deleted after it's moved to L3, this is not valid with trivial move because although the file was moved it is now used by L3
```
```
CuckooTableDBTest.CompactionIntoMultipleFiles
Same as DBTest.CompactionsGenerateMultipleFiles
```
This diff is based on a work by @sdong https://reviews.facebook.net/D34149
Test Plan: make -j64 check
Reviewers: rven, sdong, igor
Reviewed By: igor
Subscribers: yhchiang, ott, march, dhruba, sdong
Differential Revision: https://reviews.facebook.net/D34797
Summary:
CPU profiling reveals GetApproximateSizes as a bottleneck for performance. The current implementation is sub-optimal, it scans every file in every level to compute the result.
We can take advantage of the fact that all levels above 0 are sorted in the increasing order of key ranges and use binary search to locate the starting index. This can reduce the number of comparisons required to compute the result.
Test Plan: We have good test coverage. Run the tests.
Reviewers: sdong, igor, rven, dynamike
Subscribers: dynamike, maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D37755
Summary:
Some Mongo+Rocks datasets in Parse's environment are not doing compactions very frequently. During the quiet period (with no IO), we'd like to schedule compactions so that our reads become faster. Also, aggressively compacting during quiet periods helps when write bursts happen. In addition, we also want to compact files that are containing deleted key ranges (like old oplog keys).
All of this is currently not possible with CompactRange() because it's single-threaded and blocks all other compactions from happening. Running CompactRange() risks an issue of blocking writes because we generate too much Level 0 files before the compaction is over. Stopping writes is very dangerous because they hold transaction locks. We tried running manual compaction once on Mongo+Rocks and everything fell apart.
MarkForCompaction() solves all of those problems. This is very light-weight manual compaction. It is lower priority than automatic compactions, which means it shouldn't interfere with background process keeping the LSM tree clean. However, if no automatic compactions need to be run (or we have extra background threads available), we will start compacting files that are marked for compaction.
Test Plan: added a new unit test
Reviewers: yhchiang, rven, MarkCallaghan, sdong
Reviewed By: sdong
Subscribers: yoshinorim, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D37083
Summary:
With this change, we use L1 and up to store compaction outputs in universal compaction.
The compaction pick logic stays the same. Outputs are stored in the largest "level" as possible.
If options.num_levels=1, it behaves all the same as now.
Test Plan:
1) convert most of existing unit tests for universal comapaction to include the option of one level and multiple levels.
2) add a unit test to cover parallel compaction in universal compaction and run it in one level and multiple levels
3) add unit test to migrate from multiple level setting back to one level setting
4) add a unit test to insert keys to trigger multiple rounds of compactions and verify results.
Reviewers: rven, kradhakrishnan, yhchiang, igor
Reviewed By: igor
Subscribers: meyering, leveldb, MarkCallaghan, dhruba
Differential Revision: https://reviews.facebook.net/D34539
Summary:
We have addded new stats and perf_context for measuring the merge and filter operation time consumption.
We have bounded all the merge operations within the GUARD statment and collected the total time for these operations in the DB.
Test Plan: WIP
Reviewers: rven, yhchiang, kradhakrishnan, igor, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D34377
Summary:
When having fixed max_bytes_for_level_base, the ratio of size of largest level and the second one can range from 0 to the multiplier. This makes LSM tree frequently irregular and unpredictable. It can also cause poor space amplification in some cases.
In this improvement (proposed by Igor Kabiljo), we introduce a parameter option.level_compaction_use_dynamic_max_bytes. When turning it on, RocksDB is free to pick a level base in the range of (options.max_bytes_for_level_base/options.max_bytes_for_level_multiplier, options.max_bytes_for_level_base] so that real level ratios are close to options.max_bytes_for_level_multiplier.
Test Plan: New unit tests and pass tests suites including valgrind.
Reviewers: MarkCallaghan, rven, yhchiang, igor, ikabiljo
Reviewed By: ikabiljo
Subscribers: yoshinorim, ikabiljo, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D31437
Summary:
When using latest clang (3.6 or 3.7/trunck) rocksdb is failing with many errors. Almost all of them are missing override errors. This diff adds missing override keyword. No manual changes.
Prerequisites: bear and clang 3.5 build with extra tools
```lang=bash
% USE_CLANG=1 bear make all # generate a compilation database http://clang.llvm.org/docs/JSONCompilationDatabase.html
% clang-modernize -p . -include . -add-override
% make format
```
Test Plan:
Make sure all tests are passing.
```lang=bash
% #Use default fb code clang.
% make check
```
Verify less error and no missing override errors.
```lang=bash
% # Have trunk clang present in path.
% ROCKSDB_NO_FBCODE=1 CC=clang CXX=clang++ make
```
Reviewers: igor, kradhakrishnan, rven, meyering, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D34077
Summary: Add a DB property about live versions. It can be helpful to figure out whether there are files not live but not yet deleted, in some use cases.
Test Plan: make all check
Reviewers: rven, yhchiang, igor
Reviewed By: igor
Subscribers: yoshinorim, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D33327
Summary: For description of the bug, see comment in db_test. The fix is pretty straight forward.
Test Plan: added unit test. eventually we need better testing of FOF/POF process.
Reviewers: yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D33081
Summary:
Add a counter for collecting the wait time on db mutex.
Also add MutexWrapper and CondVarWrapper for measuring wait time.
Test Plan:
./db_test
export ROCKSDB_TESTS=MutexWaitStats
./db_test
verify stats output using db_bench
make clean
make release
./db_bench --statistics=1 --benchmarks=fillseq,readwhilewriting --num=10000 --threads=10
Sample output:
rocksdb.db.mutex.wait.micros COUNT : 7546866
Reviewers: MarkCallaghan, rven, sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D32787
Summary: Added requirement that ComputeCompactionScore() be executed in mutex, since it's accessing being_compacted bool, which can be mutated by other threads. Also added more comments about thread safety of FileMetaData, since it was a bit confusing. However, it seems that FileMetaData doesn't have data races (except being_compacted)
Test Plan: Ran 100 ConvertCompactionStyle tests with thread sanitizer. On master -- some failures. With this patch -- none.
Reviewers: yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D32283
Summary:
Introduces a new class for managing write buffer memory across column
families. We supplement ColumnFamilyOptions::write_buffer_size with
ColumnFamilyOptions::write_buffer, a shared pointer to a WriteBuffer
instance that enforces memory limits before flushing out to disk.
Test Plan: Added SharedWriteBuffer unit test to db_test.cc
Reviewers: sdong, rven, ljin, igor
Reviewed By: igor
Subscribers: tnovak, yhchiang, dhruba, xjin, MarkCallaghan, yoshinorim
Differential Revision: https://reviews.facebook.net/D22581
Summary:
Move NeedsCompaction() from VersionStorageInfo to CompactionPicker
to allow different compaction strategy to have their own way to
determine whether doing compaction is necessary.
When compaction style is set to kCompactionStyleNone, then
NeedsCompaction() will always return false.
Test Plan:
export ROCKSDB_TESTS=Compact
./db_test
Reviewers: ljin, sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28719
Summary: I found that db_stress sometimes segfault on my machine. Fix the bug.
Test Plan: make all check. Run db_stress
Reviewers: ljin, yhchiang, rven, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D28803
Summary:
We need to turn on -Wshorten-64-to-32 for mobile. See D1671432 (internal phabricator) for details.
This diff turns on the warning flag and fixes all the errors. There were also some interesting errors that I might call bugs, especially in plain table. Going forward, I think it makes sense to have this flag turned on and be very very careful when converting 64-bit to 32-bit variables.
Test Plan: compiles
Reviewers: ljin, rven, yhchiang, sdong
Reviewed By: yhchiang
Subscribers: bobbaldwin, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28689
Summary: I mistakenly changed the behavior to ++next_file_number_ instead of next_file_number_++, as it should have been: 344edbb044/db/version_set.h (L539)
Test Plan: none. not sure if this would break anything. It's just different behavior, so I'd rather not risk
Reviewers: ljin, rven, yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28557
Summary: Based on @sdong's feedback in the diff, we shouldn't keep db_mutex in CompactionJob's state. This diff removes db_mutex from CompactionJob state, by making next_file_number_ atomic. That way we only need to pass the lock to InstallCompactionResults() because of LogAndApply()
Test Plan: make check
Reviewers: ljin, yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: sdong, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28491
Summary:
This diff adds three sets of APIs to RocksDB.
= GetColumnFamilyMetaData =
* This APIs allow users to obtain the current state of a RocksDB instance on one column family.
* See GetColumnFamilyMetaData in include/rocksdb/db.h
= EventListener =
* A virtual class that allows users to implement a set of
call-back functions which will be called when specific
events of a RocksDB instance happens.
* To register EventListener, simply insert an EventListener to ColumnFamilyOptions::listeners
= CompactFiles =
* CompactFiles API inputs a set of file numbers and an output level, and RocksDB
will try to compact those files into the specified level.
= Example =
* Example code can be found in example/compact_files_example.cc, which implements
a simple external compactor using EventListener, GetColumnFamilyMetaData, and
CompactFiles API.
Test Plan:
listener_test
compactor_test
example/compact_files_example
export ROCKSDB_TESTS=CompactFiles
db_test
export ROCKSDB_TESTS=MetaData
db_test
Reviewers: ljin, igor, rven, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D24705
Summary:
Here's a prototype of redesigning pending_outputs_. This way, we don't have to expose pending_outputs_ to other classes (CompactionJob, FlushJob, MemtableList). DBImpl takes care of it.
Still have to write some comments, but should be good enough to start the discussion.
Test Plan: make check, will also run stress test
Reviewers: ljin, sdong, rven, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28353
Summary: Enforce the accessier naming convention in functions in version_set.h
Test Plan: make all check
Reviewers: ljin, yhchiang, rven, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D28143
Summary: as title
Test Plan: make release
Reviewers: sdong, yhchiang, rven, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28053
Summary:
Rename Version::Builder to VersionBuilder and expose its definition to a header.
Make VerisonBuilder not reference Version or ColumnFamilyData, only working with VersionStorageInfo.
Add version_builder_test which has a simple test.
Test Plan: make all check
Reviewers: rven, yhchiang, igor, ljin
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D27969
Summary:
Make compaction picker easier to test.
The basic idea is to separate a minimum subcomponent of Version to VersionStorageInfo, which just responsible to LSM tree. A stub VersionStorageInfo can then be easily created and passed into compaction picker so that we can check the outputs.
It now passes most tests. Still two things need to be done:
(1) deal with the FIFO compaction's file size.
(2) write an example test to make sure the interface can do the job.
Add a compaction_picker_test to make sure compaction picker codes can be easily unit tested.
Test Plan:
Pass all unit tests and compaction_picker_test
Reviewers: yhchiang, rven, igor, ljin
Reviewed By: ljin
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D27639
Summary: No need to expose them in .h
Test Plan: make release
Reviewers: igor, yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D27645
Summary: as title
Test Plan:
make release
will run full test on all stacked diffs
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D27597
Summary: as title
Test Plan:
make release
will run full test on all stacked diffs before committing
Reviewers: sdong, yhchiang, rven, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D27591
Summary:
We have several different types of data structures for file information.
FileLevel is kinda of confusing since it only contains file range and
fd. Rename it to LevelFilesBrief to make it clear.
Unfriend CompactedDBImpl as a by product
Test Plan:
make release / make all
will run full test with all stacked diffs
Reviewers: sdong, yhchiang, rven, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D27585
Summary: as title
Test Plan:
make release
I will run make all check for all stacked diffs before commit
Reviewers: sdong, yhchiang, rven, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D27573
Summary: as title
Test Plan: running make all check
Reviewers: sdong, yhchiang, rven, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D27549
Summary:
This diff speeds up DB::Open() and Version creation by limiting the number of FileMetaData initialization. The behavior of Version::UpdateAccumulatedStats() is changed as follows:
* It only initializes the first 20 uninitialized FileMetaData from file. This guarantees the size of the latest 20 files will always be compensated when they have any deletion entries. Previously it may initialize all FileMetaData by loading all files at DB::Open().
* In case none the first 20 files has any data entry, UpdateAccumulatedStats() will initialize the FileMetaData of the oldest file.
Test Plan: db_test
Reviewers: igor, sdong, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D24255
Summary:
make compaction related options changeable. Most of changes are tedious,
following the same convention: grabs MutableCFOptions at the beginning
of compaction under mutex, then pass it throughout the job and register
it in SuperVersion at the end.
Test Plan: make all check
Reviewers: igor, yhchiang, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23349
Summary:
Intead of passing callback function pointer and its arg on Table::Get()
interface, passing GetContext. This makes the interface cleaner and
possible better perf. Also adding a fast pass for SaveValue()
Test Plan: make all check
Reviewers: igor, yhchiang, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D24057
Summary:
Add a CompactedDBImpl that will enabled when calling OpenForReadOnly()
and the DB only has one level (>0) of files. As a performan comparison,
CuckooTable performs 2.1M/s with CompactedDBImpl vs. 1.78M/s with
ReadOnlyDBImpl.
Test Plan: db_bench
Reviewers: yhchiang, igor, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23553
Summary:
Now the file summary is too small for printing. Enlarge it.
To enable it, allow to pass a size to log buffer.
Test Plan:
Add a unit test.
make all check
Reviewers: ljin, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D21723
Summary: as title
Test Plan: make release
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23007
Summary:
Introducing WriteController, which is a source of truth about per-DB write delays. Let's define an DB epoch as a period where there are no flushes and compactions (i.e. new epoch is started when flush or compaction finishes). Each epoch can either:
* proceed with all writes without delay
* delay all writes by fixed time
* stop all writes
The three modes are recomputed at each epoch change (flush, compaction), rather than on every write (which is currently the case).
When we have a lot of column families, our current pull behavior adds a big overhead, since we need to loop over every column family for every write. With new push model, overhead on Write code-path is minimal.
This is just the start. Next step is to also take care of stalls introduced by slow memtable flushes. The final goal is to eliminate function MakeRoomForWrite(), which currently needs to be called for every column family by every write.
Test Plan: make check for now. I'll add some unit tests later. Also, perf test.
Reviewers: dhruba, yhchiang, MarkCallaghan, sdong, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22791
Summary:
Simply code by removing code path which does not use Arena
from NewInternalIterator
Test Plan:
make all check
make valgrind_check
Reviewers: sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22395
Summary:
Add a DB Property "rocksdb.estimate-table-readers-mem" to return estimated memory usage by all loaded table readers, other than allocated from block cache.
Refactor the property codes to allow getting property from a version, with DB mutex not acquired.
Test Plan: Add several checks of this new property in existing codes for various cases.
Reviewers: yhchiang, ljin
Reviewed By: ljin
Subscribers: xjin, igor, leveldb
Differential Revision: https://reviews.facebook.net/D20733
Summary: Add a DB property of estimated number of live keys, by adding number of entries of all mem tables and all files, subtracted by all deletions in all files.
Test Plan: Add the case in unit tests
Reviewers: hobbymanyp, ljin
Reviewed By: ljin
Subscribers: MarkCallaghan, yoshinorim, leveldb, igor, dhruba
Differential Revision: https://reviews.facebook.net/D20631
Summary:
Use FileLevel in LevelFileNumIterator, thus use new version of findFile.
Old version of findFile function is deleted.
Write a function in version_set.cc to generate FileLevel from files_.
Add GenerateFileLevelTest in version_set_test.cc
Test Plan:
make all check
Reviewers: ljin, haobo, yhchiang, sdong
Reviewed By: sdong
Subscribers: igor, dhruba
Differential Revision: https://reviews.facebook.net/D19659
Summary:
Define CompressedFileMetaData that just contains fd, smallest_slice, largest_slice. Create compressed_levels_ in Version, the space is allocated using arena
Thus increase the file meta data locality, speed up "Get" and "FindFile"
benchmark with in-memory tmpfs, could have 4% improvement under "random read" and 2% improvement under "read while writing"
benchmark command:
./db_bench --db=/mnt/db/rocksdb --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --block_size=4096 --cache_size=17179869184 --cache_numshardbits=6 --compression_type=none --compression_ratio=1 --min_level_to_compress=-1 --disable_seek_compaction=1 --hard_rate_limit=2 --write_buffer_size=134217728 --max_write_buffer_number=2 --level0_file_num_compaction_trigger=8 --target_file_size_base=33554432 --max_bytes_for_level_base=1073741824 --disable_wal=0 --sync=0 --disable_data_sync=1 --verify_checksum=1 --delete_obsolete_files_period_micros=314572800 --max_grandparent_overlap_factor=10 --max_background_compactions=4 --max_background_flushes=0 --level0_slowdown_writes_trigger=16 --level0_stop_writes_trigger=24 --statistics=0 --stats_per_interval=0 --stats_interval=1048576 --histogram=0 --use_plain_table=1 --open_files=-1 --mmap_read=1 --mmap_write=0 --memtablerep=prefix_hash --bloom_bits=10 --bloom_locality=1 --perf_level=0 --benchmarks=readwhilewriting,readwhilewriting,readwhilewriting --use_existing_db=1 --num=52428800 --threads=1 —writes_per_second=81920
Read Random:
From 1.8363 ms/op, improve to 1.7587 ms/op.
Read while writing:
From 2.985 ms/op, improve to 2.924 ms/op.
Test Plan:
make all check
Reviewers: ljin, haobo, yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba, igor
Differential Revision: https://reviews.facebook.net/D19419
Summary:
This patch include two fixes:
1. newly created Version will now takes the aggregated stats for average-value-size from the latest Version.
2. compensated size of a file is now computed only for newly created / loaded file, this addresses the issue where files are already sorted by their compensated file size but might sometimes observe some out-of-order due to later update on compensated file size.
Test Plan:
export ROCKSDB_TESTS=CompactionDele
./db_test
Reviewers: ljin, igor, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19557
Summary:
In this patch, we allow RocksDB to support multiple DB paths internally.
No user interface is supported yet so this patch is silent to users.
Test Plan: make all check
Reviewers: igor, haobo, ljin, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D18921
Summary: files_by_size_ is sorted by time in case of universal compaction. However, Version::files_ is also sorted by time. So no need for files_by_size_
Test Plan:
1) make check with the change
2) make check with `assert(last_index == c->input_version_->files_[level].size() - 1);` in compaction picker
Reviewers: dhruba, haobo, yhchiang, sdong, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19125
Summary:
This diff allows compaction to reclaim storage more effectively.
In the current design, compactions are mainly triggered based on
the file sizes. However, since deletion entries does not have
value, files which have many deletion entries are less likely
to be compacted. As a result, it may took a while to make
deletion entries to be compacted.
This diff address issue by compensating the size of deletion
entries during compaction process: the size of each deletion
entry in the compaction process is augmented by 2x average
value size. The diff applies to both leveled and universal
compacitons.
Test Plan:
develop CompactionDeletionTrigger
make db_test
./db_test
Reviewers: haobo, igor, ljin, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19029
Summary:
As discussed in our internal group, we don't get much use of seek compaction at the moment, while it's making code more complicated and slower in some cases.
This diff removes seek compaction and (hopefully) all code that was introduced to support seek compaction.
There is one test case that relied on didIO information. I'll try to find another way to implement it.
Test Plan: make check
Reviewers: sdong, haobo, yhchiang, ljin, dhruba
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19161
Summary:
https://reviews.facebook.net/D17205 removed the logic of skipping file key range check when there are less than 3 level 0 files. This patch brings it back.
Other than that, add another small optimization to avoid to check all the levels if most higher levels don't have any file.
Test Plan: make all check
Reviewers: ljin
Reviewed By: ljin
Subscribers: yhchiang, igor, haobo, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D19035
Summary: as title
Test Plan:
db_bench
the initial result is very promising. I will post results of complete
runs
Reviewers: dhruba, haobo, sdong, igor
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D18867
Summary:
In this patch, try to allocate the whole iterator tree starting from DBIter from an arena
1. ArenaWrappedDBIter is created when serves as the entry point of an iterator tree, with an arena in it.
2. Add an option to create iterator from arena for following iterators: DBIter, MergingIterator, MemtableIterator, all mem table's iterators, all table reader's iterators and two level iterator.
3. MergeIteratorBuilder is created to incrementally build the tree of internal iterators. It is passed to mem table list and version set and add iterators to it.
Limitations:
(1) Only DB::NewIterator() without tailing uses the arena. Other cases, including readonly DB and compactions are still from malloc
(2) Two level iterator itself is allocated in arena, but not iterators inside it.
Test Plan: make all check
Reviewers: ljin, haobo
Reviewed By: haobo
Subscribers: leveldb, dhruba, yhchiang, igor
Differential Revision: https://reviews.facebook.net/D18513
Summary:
Forward iterator puts everything together in a flat structure instead of
a hierarchy of nested iterators. this should simplify the code and
provide better performance. It also enables more optimization since all
information are accessiable in one place.
Init evaluation shows about 6% improvement
Test Plan: db_test and db_bench
Reviewers: dhruba, igor, tnovak, sdong, haobo
Reviewed By: haobo
Subscribers: sdong, leveldb
Differential Revision: https://reviews.facebook.net/D18795
Summary:
Introducing new compaction style -- FIFO.
FIFO compaction style has write amplification of 1 (+1 for WAL) and it deletes the oldest files when the total DB size exceeds pre-configured values.
FIFO compaction style is suited for storing high-frequency event logs.
Test Plan: Added a unit test
Reviewers: dhruba, haobo, sdong
Reviewed By: dhruba
Subscribers: alberts, leveldb
Differential Revision: https://reviews.facebook.net/D18765
Summary:
As a follow-up diff for https://reviews.facebook.net/D17805, add
optimization to check PrefixMayMatch on Seek()
Test Plan: make all check
Reviewers: igor, haobo, sdong, yhchiang, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17853
Summary:
The file tree structure in Version is prebuilt and the range of each file is known.
On the Get() code path, we do binary search in FindFile() by comparing
target key with each file's largest key and also check the range for each L0 file.
With some pre-calculated knowledge, each key comparision that has been done can serve
as a hint to narrow down further searches:
(1) If a key falls within a L0 file's range, we can safely skip the next
file if its range does not overlap with the current one.
(2) If a key falls within a file's range in level L0 - Ln-1, we should only
need to binary search in the next level for files that overlap with the current one.
(1) will be able to skip some files depending one the key distribution.
(2) can greatly reduce the range of binary search, especially for bottom
levels, given that one file most likely only overlaps with N files from
the level below (where N is max_bytes_for_level_multiplier). So on level
L, we will only look at ~N files instead of N^L files.
Some inital results: measured with 500M key DB, when write is light (10k/s = 1.2M/s), this
improves QPS ~7% on top of blocked bloom. When write is heavier (80k/s =
9.6M/s), it gives us ~13% improvement.
Test Plan: make all check
Reviewers: haobo, igor, dhruba, sdong, yhchiang
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17205
Summary:
One of our profilings shows that Version::Get() sometimes is slow when getting pointer of user comparators or other global objects. In this patch:
(1) we keep pointers of immutable objects in Version to avoid accesses them though option objects or cfd objects
(2) table_reader is directly cached in FileMetaData so that table cache don't have to go through handle first to fetch it
(3) If level 0 has less than 3 files, skip the filtering logic based on SST tables' key range. Smallest and largest key are stored in separated memory locations, which has potential cache misses
Test Plan: make all check
Reviewers: haobo, ljin
Reviewed By: haobo
CC: igor, yhchiang, nkg-, leveldb
Differential Revision: https://reviews.facebook.net/D17739
Summary:
Introducing RocksDBLite! Removes all the non-essential features and reduces the binary size. This effort should help our adoption on mobile.
Binary size when compiling for IOS (`TARGET_OS=IOS m static_lib`) is down to 9MB from 15MB (without stripping)
Test Plan: compiles :)
Reviewers: dhruba, haobo, ljin, sdong, yhchiang
Reviewed By: yhchiang
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17835
Summary: When opening DB in read-only mode, client can choose to only specify a subset of column families ("default" column family can't be omitted, though)
Test Plan: added a unit test in column_family_test
Reviewers: haobo, sdong, ljin, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17565
Summary:
As it turns out, we need the call to ComputeCompactionScore (previously: Finalize) in CompactionPicker.
The issue caused a deadlock in db_stress: http://ci-builds.fb.com/job/rocksdb_crashtest/290/console
The last two lines before a deadlock were:
2014/03/18-22:43:41.481029 7facafbee700 (Original Log Time 2014/03/18-22:43:41.480989) Compaction nothing to do
2014/03/18-22:43:41.481041 7faccf7fc700 wait for fewer level0 files...
"Compaction nothing to do" and other thread waiting for fewer level0 files. Hm hm.
I moved the pre-sorting to SaveTo, which should fix both the original and the new issue.
Test Plan: make check for now, will run db_stress in jenkins
Reviewers: dhruba, haobo, sdong
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17037
Summary:
Finalize re-sorts (read: mutates) the files_ in Version* and it is called by CompactionPicker during normal runtime. At the same time, this same Version* lives in the SuperVersion* and is accessed without the mutex in GetImpl() code path.
Mutating the files_ in one thread and reading the same files_ in another thread is a bad idea. It caused this issue: http://ci-builds.fb.com/job/rocksdb_crashtest/285/console
Long-term, we need to be more careful with method contracts and clearly document what state can be mutated when. Now that we are much faster because we don't lock in GetImpl(), we keep running into data races that were not a problem before when we were slower. db_stress has been very helpful in detecting those.
Short-term, I removed Finalize() from CompactionPicker.
Note: I believe this is an issue in current 2.7 version running in production.
Test Plan:
make check
Will also run db_stress to see if issue is gone
Reviewers: sdong, ljin, dhruba, haobo
Reviewed By: sdong
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16983
Summary:
When the manifest is getting rolled the following happens:
1) manifest_file_number_ is assigned to a new manifest number (even though the old one is still current)
2) mutex is unlocked
3) SetCurrentFile() creates temporary file manifest_file_number_.dbtmp
4) SetCurrentFile() renames manifest_file_number_.dbtmp to CURRENT
5) mutex is locked
If FindObsoleteFiles happens between (3) and (4) it will:
1) Delete manifest_file_number_.dbtmp (because it's not in pending_outputs_)
2) Delete old manifest (because the manifest_file_number_ already points to a new one)
I introduce the concept of prev_manifest_file_number_ that will avoid the race condition.
However, we should discuss the future of MANIFEST file rolling. We found some race conditions with it last week and who knows how many more are there. Nobody is using it in production because we don't trust the implementation. Should we even support it?
Test Plan: make check
Reviewers: ljin, dhruba, haobo, sdong
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16929
Summary: Moved LogBuffer class to an internal header. Removed some unneccesary indirection. Enabled log buffer for BackgroundCallFlush. Forced log buffer flush right after Unlock to improve time ordering of info log.
Test Plan: make check; db_bench compare LOG output
Reviewers: sdong
Reviewed By: sdong
CC: leveldb, igor
Differential Revision: https://reviews.facebook.net/D16707
Summary: Now while the background thread is picking compactions, it writes out multiple info_logs, especially for universal compaction, which introduces a chance of waiting log writing in mutex, which is bad. To remove this risk, write all those info logs to a buffer and flush it after releasing the mutex.
Test Plan:
make all check
check the log lines while running some tests that trigger compactions.
Reviewers: haobo, igor, dhruba
Reviewed By: dhruba
CC: i.am.jin.lei, dhruba, yhchiang, leveldb, nkg-
Differential Revision: https://reviews.facebook.net/D16515
Summary:
I though I might get away with as little changes to LogAndApply() as possible. It turns out this is not the case.
This diff introduces different behavior of LogAndApply() for three cases:
1. column family add
2. column family drop
3. no-column family manipulation
(1) and (2) don't support group commit yet.
There were a lot of problems with old version od LogAndApply, detected by db_stress. The biggest was non-atomicity of manifest writes and metadata changes (i.e. if column family add is in manifest, it also has to be in in-memory data structure).
Test Plan: db_stress
Reviewers: dhruba, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16491
Summary: New unit tests for column families
Test Plan: this is a test
Reviewers: dhruba, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16359
Summary:
* Added unit test that verifies that obsolete files are deleted.
* Advance log number for empty column family when cutting log file.
* MinLogNumber() bug fix! (caught by the new unit test)
Test Plan: unit test
Reviewers: dhruba, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16311
Summary: Provide a public API for users to access the table properties for each SSTable.
Test Plan: Added a unit tests to test the function correctness under differnet conditions.
Reviewers: haobo, dhruba, sdong
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16083
Summary:
The change to the public behavior:
* When opening a DB or creating new column family client gets a ColumnFamilyHandle.
* As long as column family handle is alive, client can do whatever he wants with it, even drop it
* Dropped column family can still be read from (using the column family handle)
* Added a new call CloseColumnFamily(). Client has to close all column families that he has opened before deleting the DB
* As soon as column family is closed, any calls to DB using that column family handle will fail (also any outstanding calls)
Internally:
* Ref-counting ColumnFamilyData
* New thread-safety for ColumnFamilySet
* Dropped column families are now completely dropped and their memory cleaned-up
Test Plan: added some tests to column_family_test
Reviewers: dhruba, haobo, kailiu, sdong
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16101
Summary:
This patch optimized Get() code paths by avoiding malloc of iterators. Iterator creation is moved to mem table rep implementations, where a callback is called when any key is found. This is the same practice as what we do in (SST) table readers.
db_bench result for readrandom following a writeseq, with no compression, single thread and tmpfs, we see throughput improved to 144958 from 139027, about 3%.
Test Plan: make all check
Reviewers: dhruba, haobo, igor
Reviewed By: haobo
CC: leveldb, yhchiang
Differential Revision: https://reviews.facebook.net/D14685
Summary: Replaced most of occurrences of Options with more specific DBOptions. This brings us very close to supporting different configuration options for each column family.
Test Plan: make check
Reviewers: dhruba, haobo, kailiu, sdong
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15933
Summary:
Adapting table cache to column families is interesting. We want table cache to be global LRU, so if some column families are use not as often as others, we want them to be evicted from cache. However, current TableCache object also constructs tables on its own. If table is not found in the cache, TableCache automatically creates new table. We want each column family to be able to specify different table factory.
To solve the problem, we still have a single LRU, but we provide the LRUCache object to TableCache on construction. We have one TableCache per column family, but the underyling cache is shared by all TableCache objects.
This allows us to have a global LRU, but still be able to support different table factories for different column families. Also, in the future it will also be able to support different directories for different column families.
Test Plan: make check
Reviewers: dhruba, haobo, kailiu, sdong
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15915
Summary: Compaction picker and internal key comparator are different for each column family (not global), so they should live in ColumnFamilyData
Test Plan: make check
Reviewers: dhruba, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15801
Summary: Removed default_cfd_ from all flush code paths. This means we can now flush memtables from arbitrary column families!
Test Plan: Added a new unit test
Reviewers: dhruba, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15789
Summary: Making room for write will be the hardest part of the column family implementation. For now, I just iterate through all column families and run MakeRoomForWrite() for every one.
Test Plan: make check does not complain
Reviewers: dhruba, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15597
Summary: ColumnFamilyData grew a lot, there's much more data that it holds now. It makes more sense to encapsulate it better by making it a class.
Test Plan: make check
Reviewers: dhruba, haobo, kailiu, sdong
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15579
Summary: This one is big. It adds ability to write to and read from different column families (see the unit test). It also supports recovery of different column families from log, which was the hardest part to reason about. We need to make sure to never delete the log file which has unflushed data from any column family. To support that, I added another concept, which is versions_->MinLogNumber()
Test Plan: Added a unit test in column_family_test
Reviewers: dhruba, haobo, sdong, kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15537
Summary: This removes the default implementation of LogAndApply that applied the changed to the default column family by default. It is mostly simple reformatting.
Test Plan: make check
Reviewers: dhruba, kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15465
Summary: All memtables and immutable memtables are moved from DBImpl to ColumnFamilyData. For now, they are all referenced from default column family in DBImpl. It shouldn't be hard to get them from custom column family.
Test Plan: make check
Reviewers: dhruba, kailiu, sdong
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15459
Summary:
@dhruba, I'm not sure where we need to sync the directory. I implemented the function in Env() and added the dir sync just after we close the newly created file in the builder.
Should I also add FsyncDir() to new files that get created by a compaction?
Test Plan: Confirmed that FsyncDir is returning Status::OK()
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D14751
Summary: There is no reason to have functions NeedCompaction(), MaxCompactionScore() and MaxCompactionScoreLevel() in VersionSet, since they don't access any data in VersionSet.
Test Plan: make check
Reviewers: kailiu, haobo, sdong
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15333
Summary:
A lot of our code implicitly assumes number_levels to be static. ReduceNumberOfLevels() breaks that assumption. For example, after calling ReduceNumberOfLevels(), DBImpl::NumberLevels() will be different from VersionSet::NumberLevels(). This is dangerous. Thankfully, it's not in public headers and is only used from LDB cmd tool. LDB tool is only using it statically, i.e. it never calls it with running DB instance. With this diff, we make it explicitly static. This way, we can assume number_levels to be immutable and not break assumption that lot of our code is relying upon. LDB tool can still use the method.
Also, I removed the method from a separate file since it breaks filename completition. version_se<TAB> now completes to "version_set." instead of "version_set" (without the dot). I don't see a big reason that the function should be in a different file.
Test Plan: reduce_levels_test
Reviewers: dhruba, haobo, kailiu, sdong
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15303
Summary:
I created a separate class ColumnFamilySet to keep track of column families. Before we did this in VersionSet and I believe this approach is cleaner.
Let me know if you have any comments. I will commit tomorrow.
Test Plan: make check
Reviewers: dhruba, haobo, kailiu, sdong
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15357
Summary: The only thing we do with compaction pointers is set them to some values, we never actually read them. I don't know what we used them for, but it doesn't look like we use them anymore.
Test Plan: make check
Reviewers: dhruba, haobo, kailiu, sdong
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15225
Summary:
This is a big one. This diff moves all the code related to picking compactions from VersionSet to new class CompactionPicker. Column families' compactions will be completely separate processes, so we need to have multiple CompactionPickers.
To make this easier to review, most of the code change is just copy/paste. There is also a small change not to use VersionSet::current_, but rather to take `Version* version` as a parameter. Most of the other code is exactly the same.
In future diffs, I will also make some improvements to CompactionPickers. I think the most important part will be encapsulating it better. Currently Version, VersionSet, Compaction and CompactionPicker are all friend classes, which makes it harder to change the implementation.
This diff depends on D15171, D15183, D15189 and D15201
Test Plan: `make check`
Reviewers: kailiu, sdong, dhruba, haobo
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15207
Summary:
I'm sure we'll all agree that version_set.cc needs simplifying. This diff moves Compaction class to a separate file.
The diff depends on D15171 and D15183
Test Plan: make check
Reviewers: dhruba, haobo, kailiu, sdong
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15189
Summary:
There were some functions in VersionSet that had no reason to be there instead of Version. Moving them to Version will make column families implementation easier.
The functions moved are:
* NumLevelBytes
* LevelSummary
* LevelFileSummary
* MaxNextLevelOverlappingBytes
* AddLiveFiles (previously AddLiveFilesCurrentVersion())
* NeedSlowdownForNumLevel0Files
The diff continues on (and depends on) D15171
Test Plan: make check
Reviewers: dhruba, haobo, kailiu, sdong, emayanke
Reviewed By: sdong
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15183
Summary:
With column families VersionSet will not have a constant number of levels (each CF can have different options), so we'll need to eliminate call to VersionSet::NumberLevels()
This diff decreases number of callsites, but we're not there yet. It associates number of levels with Version (each version is associated with single CF) instead of VersionSet.
I have also slightly changed how VersionSet keeps track of manifest size.
This diff also modifies constructor of Compaction such that it takes input_version and automatically Ref()s it. Before this was done outside of constructor.
In next diffs I will continue to decrease number of callsites of VersionSet::NumberLevels() and also references to current_
Test Plan: make check
Reviewers: haobo, dhruba, kailiu, sdong
Reviewed By: sdong
Differential Revision: https://reviews.facebook.net/D15171
Summary:
When doing CompactRange(), we should first flush the memtable and then calculate max_level_with_files. Also, we want to compact all the levels that have files, including level `max_level_with_files`.
This patch fixed the unit test.
Test Plan: Added a failing unit test and a fix, so it's not failing anymore.
Reviewers: dhruba, haobo, sdong
Reviewed By: haobo
CC: leveldb, xjin
Differential Revision: https://reviews.facebook.net/D14421
Summary: Currently in DBImpl::MakeRoomForWrite(), we do "versions_->NumLevelFiles(0) >= options_.level0_slowdown_writes_trigger" to check whether the writer thread needs to slow down. However, versions_->NumLevelFiles(0) is slightly more expensive than we expected. By caching the result of the comparison when installing a new version, we can avoid this function call every time.
Test Plan:
make all check
Manually trigger this behavior by applying universal compaction style and make sure inserts are made slow after there are certain number of files.
Reviewers: haobo, kailiu, igor
Reviewed By: kailiu
CC: nkg-, leveldb
Differential Revision: https://reviews.facebook.net/D15141
Summary: We don't want to delete ColumnFamilyData object if somebody has references to it.
Test Plan: `make check` for now, but will need to implement bigger column family test case
Reviewers: dhruba, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15111
Summary:
The biggest change here is getting rid of current_ Version and adding a column_family_data->current Version to each column family.
I have also fixed some smaller things in VersionSet that made it easier to implement Column family support.
Test Plan: make check
Reviewers: dhruba, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15105
Summary:
In some use cases, table readers for all live files should always be cached. In that case, there will be an opportunity to avoid the table cache look-up while Get() and NewIterator().
We define options.max_open_files = -1 to be the mode that table readers for live files will always be kept. In that mode, table readers are cached in FileMetaData (with a reference count hold in table cache). So that when executing table_cache.Get() and table_cache.newInterator(), LRU cache checking can be by-passed, to reduce latency.
Test Plan: add a test case in db_test
Reviewers: haobo, kailiu
Reviewed By: haobo
CC: dhruba, igor, leveldb
Differential Revision: https://reviews.facebook.net/D15039
Summary:
In addition to implementing OpenWithColumnFamilies, this diff also includes some minor changes:
* Changed all column family names from Slice() to std::string. The performance of column family name handling is not critical, and it's more convenient and cleaner to have names as std::strings
* Implemented ColumnFamilyOptions(const Options&) and DBOptions(const Options&)
* Added ColumnFamilyOptions to VersionSet::ColumnFamilyData. ColumnFamilyOptions are specified on OpenWithColumnFamilies() and CreateColumnFamily()
I will keep the diff in the Phabricator for a day or two and will push to the branch then. Feel free to comment even after the diff has been pushed.
Test Plan: Added a simple unit test
Reviewers: dhruba, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15033
Summary:
This diff provides basic implementations of CreateColumnFamily(), DropColumnFamily() and ListColumnFamilies(). It builds on top of https://reviews.facebook.net/D14733
It also includes a bug fix for DBImplReadOnly, where Get implementation would be redirected to DBImpl instead of DBImplReadOnly.
Test Plan: Added unit test
Reviewers: dhruba, haobo, kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15021
Summary: I made some cleanup while reading the source code in `db`. Most changes are about style, naming or C++ 11 new features.
Test Plan: ran `make check`
Reviewers: haobo, dhruba, sdong
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15009
Summary:
<This diff is for Column Family branch>
Added fields in manifest file to support adding and deleting column families.
Pretty simple change, each version edit record can be:
1. add column family
2. drop column family
3. add and delete N files from a single column family (compactions and flushes will generate such records)
Test Plan: make check works, the code is backward compatible
Reviewers: dhruba, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14733
Summary:
Instead of locking and saving a DB state, we can cache a DB state and update it only when it changes. This change reduces lock contention and speeds up read operations on the DB.
Performance improvements are substantial, although there is some cost in no-read workloads. I ran the regression tests on my devserver and here are the numbers:
overwrite 56345 -> 63001
fillseq 193730 -> 185296
readrandom 771301 -> 1219803 (58% improvement!)
readrandom_smallblockcache 677609 -> 862850
readrandom_memtable_sst 710440 -> 1109223
readrandom_fillunique_random 221589 -> 247869
memtablefillrandom 105286 -> 92643
memtablereadrandom 763033 -> 1288862
Test Plan:
make asan_check
I am also running db_stress
Reviewers: dhruba, haobo, sdong, kailiu
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14679
Summary: When deconstructing an iterator, no need to check obsolete file if it doesn't hold last reference of any version.
Test Plan: make all check
Reviewers: haobo, igor, dhruba, kailiu
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14595
Summary: In get operations, merge_operands is only used in few cases. Lazily initialize it can reduce average latency in some cases
Test Plan: make all check
Reviewers: haobo, kailiu, dhruba
Reviewed By: haobo
CC: igor, nkg-, leveldb
Differential Revision: https://reviews.facebook.net/D14415
Conflicts:
db/db_impl.cc
db/memtable.cc
Summary: In get operations, merge_operands is only used in few cases. Lazily initialize it can reduce average latency in some cases
Test Plan: make all check
Reviewers: haobo, kailiu, dhruba
Reviewed By: haobo
CC: igor, nkg-, leveldb
Differential Revision: https://reviews.facebook.net/D14415
Summary:
@haobo's suggestions from https://reviews.facebook.net/D13827
Renaming some variables, deprecating purge_log_after_flush, changing for loop into auto for loop.
I have not implemented deleting objects outside of mutex yet because it would require a big code change - we would delete object in db_impl, which currently does not know anything about object because it's defined in version_edit.h (FileMetaData). We should do it at some point, though.
Test Plan: Ran deletefile_test
Reviewers: haobo
Reviewed By: haobo
CC: leveldb, haobo
Differential Revision: https://reviews.facebook.net/D14025
Summary:
Here's one solution we discussed on speeding up FindObsoleteFiles. Keep a set of all files in DBImpl and update the set every time we create a file. I probably missed few other spots where we create a file.
It might speed things up a bit, but makes code uglier. I don't really like it.
Much better approach would be to abstract all file handling to a separate class. Think of it as layer between DBImpl and Env. Having a separate class deal with file namings and deletion would benefit both code cleanliness (especially with huge DBImpl) and speed things up. It will take a huge effort to do this, though.
Let's discuss offline today.
Test Plan: Ran ./db_stress, verified that files are getting deleted
Reviewers: dhruba, haobo, kailiu, emayanke
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D13827
Summary: This is to give application compaction filter a chance to access context information of a specific compaction run. For example, depending on whether a compaction goes through all data files, the application could do things differently.
Test Plan: make check
Reviewers: dhruba, kailiu, sdong
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13683
Summary:
This patch adds a option for universal compaction to allow us to only compress output files if the files compacted previously did not yet reach a specified ratio, to save CPU costs in some cases.
Compression is always skipped for flushing. This is because the size information is not easy to evaluate for flushing case. We can improve it later.
Test Plan:
add test
DBTest.UniversalCompactionCompressRatio1 and DBTest.UniversalCompactionCompressRatio12
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13467
Summary:
Enable background flush thread in this patch and fix unit tests with:
(1) After background flush, schedule a background compaction if condition satisfied;
(2) Fix a bug that if universal compaction is enabled and number of levels are set to be 0, compaction will not be automatically triggered
(3) Fix unit tests to wait for compaction to finish instead of flush, before checking the compaction results.
Test Plan: pass all unit tests
Reviewers: haobo, xjin, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13461
Summary:
So far we only have key/value pairs as well as bloom filter stored in the
sst file. It will be great if we are able to store more metadata about
this table itself, for example, the entry size, bloom filter name, etc.
This diff is the first step of this effort. It allows table to keep the
basic statistics mentioned in http://fburl.com/14995441, as well as
allowing writing user-collected stats to stats block.
After this diff, we will figure out the interface of how to allow user to collect their interested statistics.
Test Plan:
1. Added several unit tests.
2. Ran `make check` to ensure it doesn't break other tests.
Reviewers: dhruba, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13419
Summary:
Change namespace from leveldb to rocksdb. This allows a single
application to link in open-source leveldb code as well as
rocksdb code into the same process.
Test Plan: compile rocksdb
Reviewers: emayanke
Reviewed By: emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13287
Summary:
Added a new field called max_size_amplification_ratio in the
CompactionOptionsUniversal structure. This determines the maximum
percentage overhead of space amplification.
The size amplification is defined to be the ratio between the size of
the oldest file to the sum of the sizes of all other files. If the
size amplification exceeds the specified value, then min_merge_width
and max_merge_width are ignored and a full compaction of all files is done.
A value of 10 means that the size a database that stores 100 bytes
of user data could occupy 110 bytes of physical storage.
Test Plan: Unit test DBTest.UniversalCompactionSpaceAmplification added.
Reviewers: haobo, emayanke, xjin
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12825
Summary:
If ReadOptions.non_blocking_io is set to true, then KeyMayExists
and Iterators will return data that is cached in RAM.
If the Iterator needs to do IO from storage to serve the data,
then the Iterator.status() will return Status::IsRetry().
Test Plan:
Enhanced unit test DBTest.KeyMayExist to detect if there were are IOs
issues from storage. Added DBTest.NonBlockingIteration to verify
nonblocking Iterations.
Reviewers: emayanke, haobo
Reviewed By: haobo
CC: leveldb
Maniphest Tasks: T63
Differential Revision: https://reviews.facebook.net/D12531
Summary: Fix code so that the filter_block layer only assumes keys are internal when prefix_extractor is set.
Test Plan: ./filter_block_test
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12501
Summary: If use_prefix_filters is set and read_range>1, then the random seeks will set a the prefix filter to be the prefix of the key which was randomly selected as the target. Still need to add statistics (perhaps in a separate diff).
Test Plan: ./db_bench --benchmarks=fillseq,prefixscanrandom --num=10000000 --statistics=1 --use_prefix_blooms=1 --use_prefix_api=1 --bloom_bits=10
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb, haobo
Differential Revision: https://reviews.facebook.net/D12273
Summary: An api to query the level, key ranges, size etc for each SST file and an api to delete a specific file from the db and all associated state in the bookkeeping datastructures.
Notes: Editing the manifest version does not release the obsolete files right away. However deleting the file directly will mess up the iterator. We may need a more aggressive/timely file deletion api.
I have used std::unique_ptr - will switch to boost:: since this is external. thoughts?
Unit test is fragile right now as it expects the compaction at certain levels.
Test Plan: unittest
Reviewers: dhruba, vamsi, emayanke
CC: zshao, leveldb, haobo
Task ID: #
Blame Rev:
Summary:
The pre-existing code was purging a DeleteMarker if thay key did not
exist in deeper levels. But in the Universal Compaction Style, all
files are in Level0. For compaction runs that did not include the
earliest file, we were erroneously purging the DeleteMarkers.
The fix is to purge DeleteMarkers only if the compaction includes
the earlist file.
Test Plan: DBTest.Randomized triggers this code path.
Differential Revision: https://reviews.facebook.net/D12081
Summary:
Here are the major changes to the Merge Interface. It has been expanded
to handle cases where the MergeOperator is not associative. It does so by stacking
up merge operations while scanning through the key history (i.e.: during Get() or
Compaction), until a valid Put/Delete/end-of-history is encountered; it then
applies all of the merge operations in the correct sequence starting with the
base/sentinel value.
I have also introduced an "AssociativeMerge" function which allows the user to
take advantage of associative merge operations (such as in the case of counters).
The implementation will always attempt to merge the operations/operands themselves
together when they are encountered, and will resort to the "stacking" method if
and only if the "associative-merge" fails.
This implementation is conjectured to allow MergeOperator to handle the general
case, while still providing the user with the ability to take advantage of certain
efficiencies in their own merge-operator / data-structure.
NOTE: This is a preliminary diff. This must still go through a lot of review,
revision, and testing. Feedback welcome!
Test Plan:
-This is a preliminary diff. I have only just begun testing/debugging it.
-I will be testing this with the existing MergeOperator use-cases and unit-tests
(counters, string-append, and redis-lists)
-I will be "desk-checking" and walking through the code with the help gdb.
-I will find a way of stress-testing the new interface / implementation using
db_bench, db_test, merge_test, and/or db_stress.
-I will ensure that my tests cover all cases: Get-Memtable,
Get-Immutable-Memtable, Get-from-Disk, Iterator-Range-Scan, Flush-Memtable-to-L0,
Compaction-L0-L1, Compaction-Ln-L(n+1), Put/Delete found, Put/Delete not-found,
end-of-history, end-of-file, etc.
-A lot of feedback from the reviewers.
Reviewers: haobo, dhruba, zshao, emayanke
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11499
Summary: Removed KeyMayExistImpl because KeyMayExist demanded Get like semantics now. Removed no_io from memtable and imm because we need the proper value now and shouldn't just stop when we see Merge in memtable. Added checks to block_cache. Updated documentation and unit-test
Test Plan: make all check;db_stress for 1 hour
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11853
Summary:
Introduced KeyMayExist checking during writebatch-delete and removed from Outer Delete API because it uses writebatch-delete.
Added code to skip getting Table from disk if not already present in table_cache.
Some renaming of variables.
Introduced KeyMayExistImpl which allows checking since specified sequence number in GetImpl useful to check partially written writebatch.
Changed KeyMayExist to not be pure virtual and provided a default implementation.
Expanded unit-tests in db_test to check appropriately.
Ran db_stress for 1 hour with ./db_stress --max_key=100000 --ops_per_thread=10000000 --delpercent=50 --filter_deletes=1 --statistics=1.
Test Plan: db_stress;make check
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb, xjin
Differential Revision: https://reviews.facebook.net/D11745
Summary: As title. This diff added an option reduce_level to CompactRange. When set to true, it will try to move the files back to the minimum level sufficient to hold the data set. Note that the default is set to true now, just to excerise it in all existing tests. Will set the default to false before check-in, for backward compatibility.
Test Plan: make check;
Reviewers: dhruba, emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11553
Summary:
The maxGrandParentOverlapBytes_ was signed which was causing
an erroneous comparision between signed and unsigned longs.
This, in turn, was causing compaction-created-output-files
to be very small in size.
Test Plan: make check
Differential Revision: https://reviews.facebook.net/D11727
Summary:
Wrote a new function in db_impl.c-CheckKeyMayExist that calls Get but with a new parameter turned on which makes Get return false only if bloom filters can guarantee that key is not in database. Delete calls this function and if the option- deletes_use_filter is turned on and CheckKeyMayExist returns false, the delete will be dropped saving:
1. Put of delete type
2. Space in the db,and
3. Compaction time
Test Plan:
make all check;
will run db_stress and db_bench and enhance unit-test once the basic design gets approved
Reviewers: dhruba, haobo, vamsi
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11607
Summary:
Rename PickCompactionHybrid to PickCompactionUniversal.
Changed a few LOG message from "Hybrid:" to "Universal:".
Test Plan:
Reviewers:
CC:
Task ID: #
Blame Rev:
Summary:
There is a new option called hybrid_mode which, when switched on,
causes HBase style compactions. Files from L0 are
compacted back into L0. This meat of this compaction algorithm
is in PickCompactionHybrid().
All files reside in L0. That means all files have overlapping
keys. Each file has a time-bound, i.e. each file contains a
range of keys that were inserted around the same time. The
start-seqno and the end-seqno refers to the timeframe when
these keys were inserted. Files that have contiguous seqno
are compacted together into a larger file. All files are
ordered from most recent to the oldest.
The current compaction algorithm starts to look for
candidate files starting from the most recent file. It continues to
add more files to the same compaction run as long as the
sum of the files chosen till now is smaller than the next
candidate file size. This logic needs to be debated
and validated.
The above logic should reduce write amplification to a
large extent... will publish numbers shortly.
Test Plan: dbstress runs for 6 hours with no data corruption (tested so far).
Differential Revision: https://reviews.facebook.net/D11289
Summary:
This diff simplifies EnvOptions by treating it as POD, similar to Options.
- virtual functions are removed and member fields are accessed directly.
- StorageOptions is removed.
- Options.allow_readahead and Options.allow_readahead_compactions are deprecated.
- Unused global variables are removed: useOsBuffer, useFsReadAhead, useMmapRead, useMmapWrite
Test Plan: make check; db_stress
Reviewers: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11175
Summary: Added the 'score' column to the compaction stats output, which shows the level total size devided by level target size. Could be useful when monitoring compaction decisions...
Test Plan: make check; db_bench
Reviewers: dhruba
CC: leveldb, MarkCallaghan
Differential Revision: https://reviews.facebook.net/D11025
Summary:
This diff introduces a new Merge operation into rocksdb.
The purpose of this review is mostly getting feedback from the team (everyone please) on the design.
Please focus on the four files under include/leveldb/, as they spell the client visible interface change.
include/leveldb/db.h
include/leveldb/merge_operator.h
include/leveldb/options.h
include/leveldb/write_batch.h
Please go over local/my_test.cc carefully, as it is a concerete use case.
Please also review the impelmentation files to see if the straw man implementation makes sense.
Note that, the diff does pass all make check and truly supports forward iterator over db and a version
of Get that's based on iterator.
Future work:
- Integration with compaction
- A raw Get implementation
I am working on a wiki that explains the design and implementation choices, but coding comes
just naturally and I think it might be a good idea to share the code earlier. The code is
heavily commented.
Test Plan: run all local tests
Reviewers: dhruba, heyongqiang
Reviewed By: dhruba
CC: leveldb, zshao, sheki, emayanke, MarkCallaghan
Differential Revision: https://reviews.facebook.net/D9651
Summary: Simplified level_ptrs by using a std:vector
Test Plan: make check
Reviewers: sheki, emayanke
Reviewed By: emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10245
Summary:
FindObsoleteFiles was slow, holding the single big lock, resulted in bad p99 behavior.
Didn't profile anything, but several things could be improved:
1. VersionSet::AddLiveFiles works with std::set, which is by itself slow (a tree).
You also don't know how many dynamic allocations occur just for building up this tree.
switched to std::vector, also added logic to pre-calculate total size and do just one allocation
2. Don't see why env_->GetChildren() needs to be mutex proteced, moved to PurgeObsoleteFiles where
mutex could be unlocked.
3. switched std::set to std:unordered_set, the conversion from vector is also inside PurgeObsoleteFiles
I have a feeling this should pretty much fix it.
Test Plan: make check; db_stress
Reviewers: dhruba, heyongqiang, MarkCallaghan
Reviewed By: dhruba
CC: leveldb, zshao
Differential Revision: https://reviews.facebook.net/D10197
Summary:
This patch allows an application to specify whether to use bufferedio,
reads-via-mmaps and writes-via-mmaps per database. Earlier, there
was a global static variable that was used to configure this functionality.
The default setting remains the same (and is backward compatible):
1. use bufferedio
2. do not use mmaps for reads
3. use mmap for writes
4. use readaheads for reads needed for compaction
I also added a parameter to db_bench to be able to explicitly specify
whether to do readaheads for compactions or not.
Test Plan: make check
Reviewers: sheki, heyongqiang, MarkCallaghan
Reviewed By: sheki
CC: leveldb
Differential Revision: https://reviews.facebook.net/D9429
Summary: Makefile had options to ignore sign-comparisons and unused-parameters, which should be there. Also fixed the specific errors in the code-base
Test Plan: make
Reviewers: chip, dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D9531
Summary:
SizeBeingCompacted was called without any lock protection. This causes
crashes, especially when running db_bench with value_size=128K.
The fix is to compute SizeUnderCompaction while holding the mutex and
passing in these values into the call to Finalize.
(gdb) where
#4 leveldb::VersionSet::SizeBeingCompacted (this=this@entry=0x7f0b490931c0, level=level@entry=4) at db/version_set.cc:1827
#5 0x000000000043a3c8 in leveldb::VersionSet::Finalize (this=this@entry=0x7f0b490931c0, v=v@entry=0x7f0b3b86b480) at db/version_set.cc:1420
#6 0x00000000004418d1 in leveldb::VersionSet::LogAndApply (this=0x7f0b490931c0, edit=0x7f0b3dc8c200, mu=0x7f0b490835b0, new_descriptor_log=<optimized out>) at db/version_set.cc:1016
#7 0x00000000004222b2 in leveldb::DBImpl::InstallCompactionResults (this=this@entry=0x7f0b49083400, compact=compact@entry=0x7f0b2b8330f0) at db/db_impl.cc:1473
#8 0x0000000000426027 in leveldb::DBImpl::DoCompactionWork (this=this@entry=0x7f0b49083400, compact=compact@entry=0x7f0b2b8330f0) at db/db_impl.cc:1757
#9 0x0000000000426690 in leveldb::DBImpl::BackgroundCompaction (this=this@entry=0x7f0b49083400, madeProgress=madeProgress@entry=0x7f0b41bf2d1e, deletion_state=...) at db/db_impl.cc:1268
#10 0x0000000000428f42 in leveldb::DBImpl::BackgroundCall (this=0x7f0b49083400) at db/db_impl.cc:1170
#11 0x000000000045348e in BGThread (this=0x7f0b49023100) at util/env_posix.cc:941
#12 leveldb::(anonymous namespace)::PosixEnv::BGThreadWrapper (arg=0x7f0b49023100) at util/env_posix.cc:874
#13 0x00007f0b4a7cf10d in start_thread (arg=0x7f0b41bf3700) at pthread_create.c:301
#14 0x00007f0b49b4b11d in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:115
Test Plan:
make check
I am running db_bench with a value size of 128K to see if the segfault is fixed.
Reviewers: MarkCallaghan, sheki, emayanke
Reviewed By: sheki
CC: leveldb
Differential Revision: https://reviews.facebook.net/D9279
Summary:
This adds the rate_delay_limit_milliseconds option to make the delay
configurable in MakeRoomForWrite when the max compaction score is too high.
This delay is called the Ln slowdown. This change also counts the Ln slowdown
per level to make it possible to see where the stalls occur.
From IO-bound performance testing, the Level N stalls occur:
* with compression -> at the largest uncompressed level. This makes sense
because compaction for compressed levels is much
slower. When Lx is uncompressed and Lx+1 is compressed
then files pile up at Lx because the (Lx,Lx+1)->Lx+1
compaction process is the first to be slowed by
compression.
* without compression -> at level 1
Task ID: #1832108
Blame Rev:
Test Plan:
run with real data, added test
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: dhruba
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D9045
Summary:
On some filesystems, pre-allocation can be a considerable
amount of space. xfs in our production environment pre-allocates by
1GB, for instance. By using fallocate to inform the kernel of our
expected file sizes, we eliminate this wasteage (that isn't recovered
until the file is closed which, in the case of LOG files, can be a
considerable amount of time).
Test Plan:
created an xfs loopback filesystem, mounted with
allocsize=4M, and ran db_stress. LOG file without this change was 4M,
and with it it was 128k then grew to normal size.
Reviewers: dhruba
Reviewed By: dhruba
CC: adsharma, leveldb
Differential Revision: https://reviews.facebook.net/D7953
Summary:
Replace manual memory management with std::unique_ptr in a
number of places; not exhaustive, but this fixes a few leaks with file
handles as well as clarifies semantics of the ownership of file handles
with log classes.
Test Plan: db_stress, make check
Reviewers: dhruba
Reviewed By: dhruba
CC: zshao, leveldb, heyongqiang
Differential Revision: https://reviews.facebook.net/D8043
Summary:
Check in LogAndApply if the file size is more than the limit set in
Options.
Things to consider : will this be expensive?
Test Plan: make all check. Inputs on a new unit test?
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D7701
Summary: Due to how the code handled compactions in Level 0 in `PickCompaction()` it could be the case that two compactions on level 0 ran that produced tables in level 1 that overlap. However, this case seems like it would only occur on a seek compaction which is unlikely on level 0. Furthermore, level 0 and level 1 had to have a certain arrangement of files.
Test Plan:
make check
Reviewers: dhruba, vamsi
Reviewed By: dhruba
CC: leveldb, sheki
Differential Revision: https://reviews.facebook.net/D7923
Summary:
Pretty much a blind copy of the patch in open source.
Hope to get this in before we make a release
Test Plan: make clean check
Reviewers: dhruba, heyongqiang
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D7809
Summary:
A compaction is picked based on its score. It is useful to
print the compaction score in the LOG because it aids in
debugging. If one looks at the logs, one can find out why
a compaction was preferred over another.
Test Plan: make clean check
Differential Revision: https://reviews.facebook.net/D7137
Summary:
Scripted and removed all trailing spaces and converted all tabs to
spaces.
Also fixed other lint errors.
All lint errors from this point of time should be taken seriously.
Test Plan: make all check
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D7059
Summary:
When we expand the range of keys for a level 0 compaction, we
need to invoke ParentFilesInCompaction() only once for the
entire range of keys that is being compacted. We were invoking
it for each file that was being compacted, but this triggers
an assertion because each file's range were contiguous but
non-overlapping.
I renamed ParentFilesInCompaction to ParentRangeInCompaction
to adequately represent that it is the range-of-keys and
not individual files that we compact in a single compaction run.
Here is the assertion that is fixed by this patch.
db_test: db/version_set.cc:585: void leveldb::Version::ExtendOverlappingInputs(int, const leveldb::Slice&, const leveldb::Slice&, std::vector<leveldb::FileMetaData*, std::allocator<leveldb::FileMetaData*> >*, int): Assertion `user_cmp->Compare(flimit, user_begin) >= 0' failed.
Test Plan: make clean check OPT=-g
Reviewers: sheki
Reviewed By: sheki
CC: MarkCallaghan, emayanke, leveldb
Differential Revision: https://reviews.facebook.net/D6963
Summary:
The manifest file contains a series of edits. If the verbose
option is switched on, then print each individual edit in the
manifest file. This helps in debugging.
Test Plan: make clean manifest_dump
Reviewers: emayanke, sheki
Reviewed By: sheki
CC: leveldb
Differential Revision: https://reviews.facebook.net/D6807
Summary:
When a new version is created, we sort all the files at every
level based on their size. This is necessary because we want
to compact the largest file first. The sorting takes quite a
bit of CPU.
Moved the sorting code to be outside the mutex. Also, the
earlier code was sorting files at all levels but we do not
need to sort the highest-number level because those files
are never the cause of any compaction. To reduce sorting
costs, we sort only the first few files in each level
because it is likely that those are the only files in that
level that will be picked for compaction.
At steady state, I have seen that this patch increase
throughout from 1500 writes/sec to 1700 writes/sec at the
end of a 72 hour run. The cpu saving by not sorting the
last level was not distinctive in this test run because
there were only 100K files in the highest numbered level.
I expect the cpu saving to be significant when the number of
files is much higher.
This is mostly an early preview and not ready for rigorous review.
With this patch, the writs/sec is now bottlenecked not by the sorting code but by GetOverlappingInputs. I am working on a patch to optimize GetOverlappingInputs.
Test Plan: make check
Reviewers: MarkCallaghan, heyongqiang
Reviewed By: heyongqiang
Differential Revision: https://reviews.facebook.net/D6411
Summary:
The Version::GetOverlappingInputs() is called multiple times in
the compaction code path. Eack invocation does a binary search
for overlapping files in the specified key range.
This patch remembers the offset of an overlapped file when
GetOverlappingInputs() is called the first time within
a compaction run. Suceeding calls to GetOverlappingInputs()
uses the remembered index to avoid the binary search.
I measured that 1000 iterations of GetOverlappingInputs
takes around 4500 microseconds without this patch. If I use
this patch with the hint on every invocation, then 1000
iterations take about 3900 microsecond.
Test Plan: make check OPT=-g
Reviewers: heyongqiang
Reviewed By: heyongqiang
CC: MarkCallaghan, emayanke, sheki
Differential Revision: https://reviews.facebook.net/D6513
Summary:
The method Version::GetOverlappingInputs used a sequential search
to map a kay-range to a set of files. But the files are arranged
in ascending order of key, so a biary search is more effective.
This patch implements Version::GetOverlappingInputsBinarySearch
that finds one file that corresponds to the specified key range
and then iterates backwards and forwards to find all overlapping
files.
This patch is critical for making compactions efficient, especially
when there are thousands of files in a single level.
I measured that 1000 iterations of TEST_MaxNextLevelOverlappingBytes
takes 16000 microseconds without this patch. With this patch, the
same method takes about 4600 microseconds.
Test Plan: Almost all unit tests in db_test uses this method to lookup keys.
Reviewers: heyongqiang
Reviewed By: heyongqiang
CC: MarkCallaghan, emayanke, sheki
Differential Revision: https://reviews.facebook.net/D6465
Summary: as subject.
Test Plan: manually test it, will add a testcase
Reviewers: dhruba, MarkCallaghan
Differential Revision: https://reviews.facebook.net/D6345
Summary:
Adds a method that returns the score for the next level that most
needs compaction. That method is then used by db_bench to rate limit threads.
Threads are put to sleep at the end of each stats interval until the score
is less than the limit. The limit is set via the --rate_limit=$double option.
The specified value must be > 1.0. Also adds the option --stats_per_interval
to enable additional metrics reported every stats interval.
Task ID: #
Blame Rev:
Test Plan:
run db_bench
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: dhruba
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D6243
Summary:
It is best if we pick the largest file to compact in a level.
This reduces the write amplification factor for compactions.
Each level has an auxiliary data structure called files_by_size_
that sorts all files by their size. This data structure is
updated when a new version is created.
Test Plan: make check
Differential Revision: https://reviews.facebook.net/D6195
