Summary:
Note: rebase on and merge after https://github.com/facebook/rocksdb/pull/9349, https://github.com/facebook/rocksdb/pull/9345, (optional) https://github.com/facebook/rocksdb/pull/9393
**Context:**
(Quoted from pdillinger) Layers of information during new Bloom/Ribbon Filter construction in building block-based tables includes the following:
a) set of keys to add to filter
b) set of hashes to add to filter (64-bit hash applied to each key)
c) set of Bloom indices to set in filter, with duplicates
d) set of Bloom indices to set in filter, deduplicated
e) final filter and its checksum
This PR aims to detect corruption (e.g, unexpected hardware/software corruption on data structures residing in the memory for a long time) from b) to e) and leave a) as future works for application level.
- b)'s corruption is detected by verifying the xor checksum of the hash entries calculated as the entries accumulate before being added to the filter. (i.e, `XXPH3FilterBitsBuilder::MaybeVerifyHashEntriesChecksum()`)
- c) - e)'s corruption is detected by verifying the hash entries indeed exists in the constructed filter by re-querying these hash entries in the filter (i.e, `FilterBitsBuilder::MaybePostVerify()`) after computing the block checksum (except for PartitionFilter, which is done right after each `FilterBitsBuilder::Finish` for impl simplicity - see code comment for more). For this stage of detection, we assume hash entries are not corrupted after checking on b) since the time interval from b) to c) is relatively short IMO.
Option to enable this feature of detection is `BlockBasedTableOptions::detect_filter_construct_corruption` which is false by default.
**Summary:**
- Implemented new functions `XXPH3FilterBitsBuilder::MaybeVerifyHashEntriesChecksum()` and `FilterBitsBuilder::MaybePostVerify()`
- Ensured hash entries, final filter and banding and their [cache reservation ](https://github.com/facebook/rocksdb/issues/9073) are released properly despite corruption
- See [Filter.construction.artifacts.release.point.pdf ](https://github.com/facebook/rocksdb/files/7923487/Design.Filter.construction.artifacts.release.point.pdf) for high-level design
- Bundled and refactored hash entries's related artifact in XXPH3FilterBitsBuilder into `HashEntriesInfo` for better control on lifetime of these artifact during `SwapEntires`, `ResetEntries`
- Ensured RocksDB block-based table builder calls `FilterBitsBuilder::MaybePostVerify()` after constructing the filter by `FilterBitsBuilder::Finish()`
- When encountering such filter construction corruption, stop writing the filter content to files and mark such a block-based table building non-ok by storing the corruption status in the builder.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9342
Test Plan:
- Added new unit test `DBFilterConstructionCorruptionTestWithParam.DetectCorruption`
- Included this new feature in `DBFilterConstructionReserveMemoryTestWithParam.ReserveMemory` as this feature heavily touch ReserveMemory's impl
- For fallback case, I run `./filter_bench -impl=3 -detect_filter_construct_corruption=true -reserve_table_builder_memory=true -strict_capacity_limit=true -quick -runs 10 | grep 'Build avg'` to make sure nothing break.
- Added to `filter_bench`: increased filter construction time by **30%**, mostly by `MaybePostVerify()`
- FastLocalBloom
- Before change: `./filter_bench -impl=2 -quick -runs 10 | grep 'Build avg'`: **28.86643s**
- After change:
- `./filter_bench -impl=2 -detect_filter_construct_corruption=false -quick -runs 10 | grep 'Build avg'` (expect a tiny increase due to MaybePostVerify is always called regardless): **27.6644s (-4% perf improvement might be due to now we don't drop bloom hash entry in `AddAllEntries` along iteration but in bulk later, same with the bypassing-MaybePostVerify case below)**
- `./filter_bench -impl=2 -detect_filter_construct_corruption=true -quick -runs 10 | grep 'Build avg'` (expect acceptable increase): **34.41159s (+20%)**
- `./filter_bench -impl=2 -detect_filter_construct_corruption=true -quick -runs 10 | grep 'Build avg'` (by-passing MaybePostVerify, expect minor increase): **27.13431s (-6%)**
- Standard128Ribbon
- Before change: `./filter_bench -impl=3 -quick -runs 10 | grep 'Build avg'`: **122.5384s**
- After change:
- `./filter_bench -impl=3 -detect_filter_construct_corruption=false -quick -runs 10 | grep 'Build avg'` (expect a tiny increase due to MaybePostVerify is always called regardless - verified by removing MaybePostVerify under this case and found only +-1ns difference): **124.3588s (+2%)**
- `./filter_bench -impl=3 -detect_filter_construct_corruption=true -quick -runs 10 | grep 'Build avg'`(expect acceptable increase): **159.4946s (+30%)**
- `./filter_bench -impl=3 -detect_filter_construct_corruption=true -quick -runs 10 | grep 'Build avg'`(by-passing MaybePostVerify, expect minor increase) : **125.258s (+2%)**
- Added to `db_stress`: `make crash_test`, `./db_stress --detect_filter_construct_corruption=true`
- Manually smoke-tested: manually corrupted the filter construction in some db level tests with basic PUT and background flush. As expected, the error did get returned to users in subsequent PUT and Flush status.
Reviewed By: pdillinger
Differential Revision: D33746928
Pulled By: hx235
fbshipit-source-id: cb056426be5a7debc1cd16f23bc250f36a08ca57
Summary:
Crash test recently started showing failures as in https://github.com/facebook/rocksdb/issues/9118 but
for files created by compaction. This change applies a similar fix.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9480
Test Plan:
Updated / extended unit test. (Some re-arranging to do the
simpler compaction testing before this special case.)
Reviewed By: ltamasi
Differential Revision: D33909835
Pulled By: pdillinger
fbshipit-source-id: 58e4b44e4ecc2d21e4df2c2d8440ec0633aa1f6c
Summary:
This PR does the following:
- Fix compilation and linking errors when building fuzzer
- Add the above to CircleCI
- Update documentation
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9420
Test Plan: CI
Reviewed By: jay-zhuang
Differential Revision: D33849452
Pulled By: riversand963
fbshipit-source-id: 0794e5d04a3f53bfd2216fe2b3cd827ca2083ac3
Summary:
* Add more micro-benchmark tests
* Expose an API in DBImpl for waiting for compactions (still not visible to the user)
* Add argument name for ribbon_bench
* remove benchmark run from CI, as it runs too long.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9436
Test Plan: CI
Reviewed By: riversand963
Differential Revision: D33777836
Pulled By: jay-zhuang
fbshipit-source-id: c05de3bc082cc05b5d019f00b324e774bf4bbd96
Summary:
Apparently setting total_order_seek=true for DB::Get was
intended to allow accurate read semantics if the current prefix
extractor doesn't match what was used to generate SST files on
disk. But since prefix_extractor was made a mutable option in 5.14.0, we
have been able to detect this case and provide the correct semantics
regardless of the total_order_seek option. Since that time, the option
has only made Get() slower in a reasonably common case: prefix_extractor
unchanged and whole_key_filtering=false.
So this change primarily removes unnecessary effect of
total_order_seek on Get. Also cleans up some related comments.
Also adds a -total_order_seek option to db_bench and canonicalizes
handling of ReadOptions in db_bench so that command line options have
the expected association with library features. (There is potential
for change in regression test behavior, but the old behavior is likely
indefensible, or some other inconsistency would need to be fixed.)
TODO in follow-up work: there should be no reason for Get() to depend on
current prefix extractor at all.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9427
Test Plan:
Unit tests updated.
Performance (using db_bench update)
Create DB with `TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -benchmarks=fillrandom -num=10000000 -disable_wal=1 -write_buffer_size=10000000 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -prefix_size=12 -whole_key_filtering=0`
Test with and without `-total_order_seek` on `TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -use_existing_db -readonly -benchmarks=readrandom -num=10000000 -duration=40 -disable_wal=1 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -prefix_size=12`
Before this change, total_order_seek=false: 25188 ops/sec
Before this change, total_order_seek=true: 1222 ops/sec (~20x slower)
After this change, total_order_seek=false: 24570 ops/sec
After this change, total_order_seek=true: 25012 ops/sec (indistinguishable)
Reviewed By: siying
Differential Revision: D33753458
Pulled By: pdillinger
fbshipit-source-id: bf892f34907a5e407d9c40bd4d42f0adbcbe0014
Summary:
Previously we enabled tracking expected state changes during
`FinishInitDb()`, as soon as the DB was opened. This meant tracing was
enabled during `VerifyDb()`. This cost extra CPU by requiring
`DBImpl::trace_mutex_` to be acquired on each read operation. It was
unnecessary since we know there are no expected state changes during the
`VerifyDb()` phase. So, this PR delays tracking expected state changes
until after the `VerifyDb()` phase has completed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9470
Test Plan:
Measured this PR reduced `VerifyDb()` 76% (387 -> 92 seconds) with
`-disable_wal=1` (i.e., expected state tracking enabled).
- benchmark command: `./db_stress -max_key=100000000 -ops_per_thread=1 -destroy_db_initially=1 -expected_values_dir=/dev/shm/dbstress_expected/ -db=/dev/shm/dbstress/ --clear_column_family_one_in=0 --disable_wal=1 --reopen=0`
- without this PR, `VerifyDb()` takes 387 seconds:
```
2022/01/30-21:43:04 Initializing worker threads
Crash-recovery verification passed :)
2022/01/30-21:49:31 Starting database operations
```
- with this PR, `VerifyDb()` takes 92 seconds
```
2022/01/30-21:59:06 Initializing worker threads
Crash-recovery verification passed :)
2022/01/30-22:00:38 Starting database operations
```
Reviewed By: riversand963
Differential Revision: D33884596
Pulled By: ajkr
fbshipit-source-id: 5f259de8087de5b0531f088e11297f37ed2f7685
Summary:
Despite attempts to optimize `db_stress` setup phase (i.e.,
pre-`OperateDb()`) latency in https://github.com/facebook/rocksdb/issues/9470 and https://github.com/facebook/rocksdb/issues/9475, it still always took tens
of seconds. Since we still aren't able to setup a 100M key `db_stress`
quickly, we should reduce the number of keys. This PR reduces it 4x
while increasing `value_size_mult` 4x (from its default value of 8) so
that memtables and SST files fill at a similar rate compared to before this PR.
Also disabled bzip2 compression since we'll probably never use it and
I noticed many CI runs spending majority of CPU on bzip2 decompression.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9476
Reviewed By: siying
Differential Revision: D33898520
Pulled By: ajkr
fbshipit-source-id: 855021784ad9664f2be5bce21f0339a1cf93230d
Summary:
**Context:**
Compiling RocksDB with -Winconsistent-missing-destructor-override reveals the following :
```
./include/rocksdb/env.h:174:11: error: '~Env' overrides a destructor but is not marked 'override' [-Werror,-Winconsistent-missing-destructor-override]
virtual ~Env();
^
./include/rocksdb/customizable.h:58:3: note: overridden virtual function is here
~Customizable() override {}
```
The need of overriding the Env's destructor seems to be introduced by https://github.com/facebook/rocksdb/pull/9293 and surfaced by -Winconsistent-missing-destructor-override, which is not turned on by default.
**Summary:**
Mark ~Env() override
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9467
Test Plan: - Turn on -Winconsistent-missing-destructor-override and USE_CLANG=1 make -jN env/env.o to see whether the error shows up
Reviewed By: jay-zhuang, riversand963, george-reynya
Differential Revision: D33864985
Pulled By: hx235
fbshipit-source-id: 4a78bd161ff153902b2676829723e9a1c33dd749
Summary:
With the code on main, `RunStressTest` increments the number of threads
one by one as the threads are created and started. This results in a
data race with `NonBatchedOpsStressTest::VerifyDb`, which reads this
value without synchronization, and is also not correct in the sense
that `VerifyDb` assumes that the number of threads already has its final
value set (e.g. it's checking whether the current thread is the last
one). The patch fixes this by setting the number of threads before
creating/starting any threads. This also eliminates the need for locking
the mutex during thread startup.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9466
Test Plan: Ran the blackbox crash test under TSAN for a while.
Reviewed By: ajkr
Differential Revision: D33858856
Pulled By: ltamasi
fbshipit-source-id: 8a6515a83fd1808b8b8dca61978777c4404f04cc
Summary:
**Context/Summary:**
AdvancedColumnFamilyOptions::rate_limit_delay_max_milliseconds has been marked as deprecated and it's time to actually remove the code.
- Keep `soft_rate_limit`/`hard_rate_limit` in `cf_mutable_options_type_info` to prevent throwing `InvalidArgument` in `GetColumnFamilyOptionsFromMap` when reading an option file still with these options (e.g, old option file generated from RocksDB before the deprecation)
- Keep `soft_rate_limit`/`hard_rate_limit` in under `OptionsOldApiTest.GetOptionsFromMapTest` to test the case mentioned above.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9455
Test Plan: Rely on my eyeball and CI
Reviewed By: ajkr
Differential Revision: D33811664
Pulled By: hx235
fbshipit-source-id: 866859427fe710354a90f1095057f80116365ff0
Summary:
From C++ 20 onwards, the != operator is not supported for a shared_ptr.
So switch to using ==.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9465
Test Plan: make check
Reviewed By: riversand963
Differential Revision: D33850596
Pulled By: anand1976
fbshipit-source-id: eec16d1aa6c39a315ec2d44d233d7518f9c1ddcb
Summary:
In RocksDB DBOptions::skip_log_error_on_recovery is marked as
"NOT SUPPORTED" for a long time, and setting this option does not have
any effect on the behavior of RocksDB library. Therefore, we are removing it
in the upcoming 7.0 release.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9434
Test Plan: CircleCI
Reviewed By: ajkr
Differential Revision: D33763015
Pulled By: akankshamahajan15
fbshipit-source-id: 11f09643298da6c02d3dcdb090b996f4c3cfdd76
Summary:
In RocksDB few overloads of DB::CompactRange() are marked as DEPRECATED_FUNC, and
we are removing it in the upcoming 7.0 release.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9444
Test Plan: CircleCI
Reviewed By: ajkr
Differential Revision: D33788520
Pulled By: akankshamahajan15
fbshipit-source-id: 716e0d5f227f791605d4d91626c0cbf5b4571630
Summary:
Even after https://github.com/facebook/rocksdb/issues/9461 could see
```
Error: please specify prefix_size for test_batches_snapshots test!
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9463
Test Plan:
run `make blackbox_crashtest` for a long time. (Unfortunately,
it's taking a long time to reproduce these failures)
Reviewed By: akankshamahajan15
Differential Revision: D33838152
Pulled By: pdillinger
fbshipit-source-id: b9a73c5bbb68df53f14c22b9b52f61d1f7ef38af
Summary:
The API is deprecated long time ago. Clean up the codebase by
removing it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9462
Test Plan: CI, fake release: D33835220
Reviewed By: riversand963
Differential Revision: D33835103
Pulled By: jay-zhuang
fbshipit-source-id: 6d2dc12c8e7fdbe2700865a3e61f0e3f78bd8184
Summary:
Disallow `immutable_db_opts.use_direct_io_for_flush_and_compaction == true` and
`mutable_db_opts.writable_file_max_buffer_size == 0`, since it causes `WritableFileWriter::Append()`
to loop forever and does not make much sense in direct IO.
This combination of options itself does not make much sense: asking RocksDB to do direct IO but not allowing
RocksDB to allocate a buffer. We should detect this false combination and warn user early, no matter whether
the application is running on a platform that supports direct IO or not. In the case of platform **not** supporting
direct IO, it's ok if the user learns about this and then finds that direct IO is not supported.
One tricky thing: the constructor of `WritableFileWriter` is being used in our unit tests, and it's impossible
to return status code from constructor. Since we do not throw, I put an assertion for now. Fortunately,
the constructor is not exposed to external applications.
Closing https://github.com/facebook/rocksdb/issues/7109
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9348
Test Plan: make check
Reviewed By: ajkr
Differential Revision: D33371924
Pulled By: riversand963
fbshipit-source-id: 2a3701ab541cee23bffda8a36cdf37b2d235edfa
Summary:
Changes in https://github.com/facebook/rocksdb/issues/9453 could trigger
```
stderr:
Error: prefixpercent is non-zero while prefix_size is not positive!
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9461
Test Plan: run `make blackbox_crashtest` for a long time
Reviewed By: ajkr
Differential Revision: D33830751
Pulled By: pdillinger
fbshipit-source-id: be88377dcaa47e4bb7adb0347762639eff8f1476
Summary:
This also removes the obsolete names BackupableDBOptions
and UtilityDB. API users must now use BackupEngineOptions and
DBWithTTL::Open. In C API, `rocksdb_backupable_db_*` is replaced
`rocksdb_backup_engine_*`. Similar renaming in Java API.
In reference to https://github.com/facebook/rocksdb/issues/9389
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9438
Test Plan: CI
Reviewed By: mrambacher
Differential Revision: D33780269
Pulled By: pdillinger
fbshipit-source-id: 4a6cfc5c1b4c78bcad790b9d3dd13c5fdf4a1fac
Summary:
MemTable::MultiGet was not considering range tombstones before
querying Bloom filter. This means range tombstones would be skipped for
keys (or prefixes) with no other entries in the memtable. This could cause
old values for a key (in SST files) to still show up until the range tombstone
covering it has been flushed.
This is fixed by essentially disabling the memtable Bloom filter when there
are any range tombstones. (This could be better optimized in the future, but
good enough for now.)
Did some other cleanup/optimization in the same code to (more than) offset
the cost of checking on range tombstones in more cases. There is now
notable improvement when memtable_whole_key_filtering and prefix_extractor
are used together (unusual), and this makes MultiGet closer to the Get
implementation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9453
Test Plan:
new unit test added. Added memtable Bloom to crash test.
Performance testing
--------------------
Build WAL-only DB (recovers to memtable):
```
TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -benchmarks=fillrandom -num=1000000 -write_buffer_size=250000000
```
Query test command, to maximize sensitivity to the changed code:
```
TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -use_existing_db -readonly -benchmarks=multireadrandom -num=10000000 -write_buffer_size=250000000 -memtable_bloom_size_ratio=0.015 -multiread_batched -batch_size=24 -threads=8 -memtable_whole_key_filtering=$MWKF -prefix_size=$PXS
```
(Note -num here is 10x larger for mostly memtable misses)
Before & after run simultaneously, average over 10 iterations per data point, ops/sec.
MWKF=0 PXS=0 (Bloom disabled)
Before: 5724844
After: 6722066
MWKF=0 PXS=7 (prefixes hardly unique; Bloom not useful)
Before: 9981319
After: 10237990
MWKF=0 PXS=8 (prefixes unique; Bloom useful)
Before: 12081715
After: 12117603
MWKF=1 PXS=0 (whole key Bloom useful)
Before: 11944354
After: 12096085
MWKF=1 PXS=7 (whole key Bloom useful in new version; prefixes not useful in old version)
Before: 9444299
After: 11826029
MWKF=1 PXS=7 (whole key Bloom useful in new version; prefixes useful in old version)
Before: 11784465
After: 11778591
Only in this last case is the 'before' *slightly* faster, perhaps because hashing prefixes is slightly faster than hashing whole keys. Otherwise, 'after' is faster.
Reviewed By: ajkr
Differential Revision: D33805025
Pulled By: pdillinger
fbshipit-source-id: 597523cae4f4eafdf6ae6bb2bc6cb46f83b017bf
Summary:
**Context/Summary:**
AdvancedColumnFamilyOptions::soft_rate_limit/hard_rate_limit have been marked as deprecated and it's time to actually remove the code.
- Keep `soft_rate_limit`/`hard_rate_limit` in `cf_mutable_options_type_info` to prevent throwing `InvalidArgument` in `GetColumnFamilyOptionsFromMap` when reading an option file still with these options (e.g, old option file generated from RocksDB before the deprecation)
- Keep `soft_rate_limit`/`hard_rate_limit` in under `OptionsOldApiTest.GetOptionsFromMapTest` to test the case mentioned above.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9452
Test Plan: Rely on my eyeball and CI
Reviewed By: ajkr
Differential Revision: D33804938
Pulled By: hx235
fbshipit-source-id: 133d49f7ec5238d7efceeb0a3122a5792a2b9945
Summary:
1. Removed the options from the Capped/Fixed SliceTransforms. Instead these classes are created with id.number. This allows the GetID() id to be calculated and stored at class construction time. This change puts the construction back to similar to how it was prior to the Customizable changes for SliceTransform.
2. Improve the performance of AsString by using the ID only if there are no option properties (which is the case for all of the builtin transforms).
Ran tests of calling AsString in a loop 5M times and found approximately a 10x performance increase vs the original code.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9401
Reviewed By: pdillinger
Differential Revision: D33668672
Pulled By: mrambacher
fbshipit-source-id: d0075912c6ece8ed754ee543bc6b0b49a169b309
Summary:
In RocksDB, this option was already marked as "NOT SUPPORTED" for a long time, and setting this option does not have any effect on the behavior of RocksDB library. Therefore, we are removing it in the preparations of the upcoming 7.0 release.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9450
Reviewed By: ajkr
Differential Revision: D33802466
Pulled By: bjlemaire
fbshipit-source-id: 97570985f1400525304053476450f7ef504c0cd5
Summary:
Regexes are considered potentially problematic for use in
registering RocksDB extensions, so we are removing
ObjectLibrary::Register() and the Regex public API it depended on (now
unused).
In reference to https://github.com/facebook/rocksdb/issues/9389
Why?
* The power of Regexes can make it hard to reason about which extension
will match what. (The replacement API isn't perfect, but we are at least
"holding the line" on patterns we have seen in practice.)
* It is easy to make regexes that don't quite mean what you think they
mean, such as forgetting that the `.` in `foo.bar` can match any character
or that matching is nondeterministic, as in `a🅱️42` matching `.*:[0-9]+`.
* Some regexes and implementations can have disastrously bad
performance. This might not be much practical concern for ObjectLibray
here, but we don't want to encourage potentially dangerous further use
in production code. (Testing code is fine. See TestRegex.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9439
Test Plan: CI
Reviewed By: mrambacher
Differential Revision: D33792342
Pulled By: pdillinger
fbshipit-source-id: 4f64dcb04764e639162c8977a5fa196f67754cec
Summary:
Add an option to set the WAL compression algorithm - wal_compression.
TODO: WAL compression is not implemented and will only support zstd initially. Will be added in subsequent diffs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9432
Reviewed By: pdillinger
Differential Revision: D33797275
Pulled By: sidroyc
fbshipit-source-id: 8db81d9c9cea5e2e4f1445d3aecad8106137b8e7
Summary:
**Context:**
Inside `BlockBasedTableBuilder::WriteRawBlock`, there are multiple places that change local variables `io_s` and `s` while
depend on them. This PR attempts to clarify the relevant logics so that it's easier to read and add places of changing these local variables later (like https://github.com/facebook/rocksdb/pull/9342.) without changing the current behavior.
**Summary:**
- Shorten the lifetime of local var `io_s` and `s` as much as possible to avoid if-else branches by early return
**Test**
- Reasoned against original behavior to verify new changes do not break existing behaviors.
- Rely on CI tests since we are not changing current behavior.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9393
Reviewed By: pdillinger
Differential Revision: D33626095
Pulled By: hx235
fbshipit-source-id: 6184d1e1d85d2650d16617c449971988d062ed3f
Summary:
There is a race in SstFileManagerImpl between the ClearError() function
and CancelErrorRecovery(). The race can cause ClearError() to deref the
file system pointer after it has been freed. This is likely to occur
during process shutdown, when the order of destruction of the
DB/Env/FileSystem and SstFileManagerImpl is not deterministic.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9435
Test Plan:
Reproduce the crash in a TSAN build by introducing sleeps in the code, and verify with
the fix.
Reviewed By: siying
Differential Revision: D33774696
Pulled By: anand1976
fbshipit-source-id: 643d3da31b8d2ee6d9b6db5d33327e0053ce3b83
Summary:
RocksDB has marked DB::AddFile() as "DEPRECATED_FUNC" for a long time, and
it will be removed in the upcoming 7.0 release.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9433
Test Plan: make check -j64; CircleCI
Reviewed By: riversand963
Differential Revision: D33763987
Pulled By: akankshamahajan15
fbshipit-source-id: a3407324479bb43689e1213e4e29d53095e7579a
Summary:
db_stress listener service always uses default filesystem to operate,
causing it to not recognize custom filesystem (like ZenFS plugin FS).
Pass the env to db_stress listener with the correct filesystem
information, so it can open the user intended filesystem.
Signed-off-by: Aravind Ramesh <Aravind.Ramesh@wdc.com>
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9352
Reviewed By: riversand963
Differential Revision: D33776762
Pulled By: pdillinger
fbshipit-source-id: e79bb9a544384f80ae9dd0108241ab9c83223954
Summary:
Right now, when error happens in block based table reader, we still call index_builder->Finish(), this causes one assertion in one stress test:
db_stress: table/block_based/index_builder.cc:202: virtual rocksdb::Status rocksdb::PartitionedIndexBuilder::Finish(rocksdb::IndexBuilder::IndexBlocks*, const rocksdb::BlockHandle&): Assertion `sub_index_builder_ == nullptr' failed.
This unlikely causes any corruption as we would finally abandon the file, but the code is confusing and it is hard to understand what would happen. Changing the behavior.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9426
Test Plan: Run existing tests
Reviewed By: pdillinger
Differential Revision: D33751929
fbshipit-source-id: 3c916b9444a4171010fc53df40496570bef5ae7a
Summary:
This PR moves RADOS support from RocksDB repo to a separate repo. The new (temporary?) repo
in this PR serves as an example before we finalize the decision on where and who to host RADOS support. At this point,
people can start from the example repo and fork.
The goal is to include this commit in RocksDB 7.0 release.
Reference:
https://github.com/ajkr/dedupfs by ajkr
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9206
Test Plan:
Follow instructions in https://github.com/riversand963/rocksdb-rados-env/blob/main/README.md and build
test binary `env_librados_test` and run it.
Also, make check
Reviewed By: ajkr
Differential Revision: D33751690
Pulled By: riversand963
fbshipit-source-id: 30466c62afa9e4619847a48567ed158e62835e35
Summary:
This PR is one proposal to resolve https://github.com/facebook/rocksdb/issues/9382.
Looking at the code, I can't think of a reason why rdb is an internal component of RocksDB: it does not require
any header files NOT in `include/rocksdb`. It's a better idea to host it somewhere else.
Plus, rdb requires python2 which is not supported any more. No fixes or improvements will be made, even for potential
security bugs (https://www.python.org/doc/sunset-python-2/).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9399
Test Plan: make check
Reviewed By: ajkr
Differential Revision: D33641965
Pulled By: riversand963
fbshipit-source-id: 2a6a74693e5de36834f355e41d6865db206af48b
Summary:
This PR moves HDFS support from RocksDB repo to a separate repo. The new (temporary?) repo
in this PR serves as an example before we finalize the decision on where and who to host hdfs support. At this point,
people can start from the example repo and fork.
Java/JNI is not included yet, and needs to be done later if necessary.
The goal is to include this commit in RocksDB 7.0 release.
Reference:
https://github.com/ajkr/dedupfs by ajkr
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9170
Test Plan:
Follow the instructions in https://github.com/riversand963/rocksdb-hdfs-env/blob/master/README.md. Build and run db_bench and db_stress.
make check
Reviewed By: ajkr
Differential Revision: D33751662
Pulled By: riversand963
fbshipit-source-id: 22b4db7f31762ed417a20239f5a08dcd1696244f
Summary:
We see:
[ RUN ] ChrootEnvWithDirectIO/EnvPosixTestWithParam.RunMany/0
env/env_test.cc:464: Failure
Expected equality of these values:
4
cur
Which is: 0
The suspicious is that the wait time is not long enough. Increase the wait time to 10s and allows earlier check.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9413
Test Plan: Run the test
Reviewed By: riversand963
Differential Revision: D33697715
fbshipit-source-id: 3d71715562a8cceb694b773276dd9e4e451a18bc
Summary:
It appears that VS2017 is covered in CircleCI so we don't need it in Appveyor. Also, currently Appveyor has some problem with installing VS2017.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9417
Test Plan: Watch Appveyor run.
Reviewed By: riversand963
Differential Revision: D33719364
fbshipit-source-id: 7f31bf056eeaf487b372881f85d134dc0fe5832a
Summary:
Loose ends relate to mmap on 32-bit systems. (Testing is more
complicated when the feature was completely disabled on 32-bit.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9386
Test Plan: CI
Reviewed By: ajkr
Differential Revision: D33590715
Pulled By: pdillinger
fbshipit-source-id: f2637036a538a552200adee65b6765fce8cae27b
Summary:
Fixes a major performance regression in 6.26, where
extra CPU is spent in SliceTransform::AsString when reads involve
a prefix_extractor (Get, MultiGet, Seek). Common case performance
is now better than 6.25.
This change creates a "fast path" for verifying that the current prefix
extractor is unchanged and compatible with what was used to
generate a table file. This fast path detects the common case by
pointer comparison on the current prefix_extractor and a "known
good" prefix extractor (if applicable) that is saved at the time the
table reader is opened. The "known good" prefix extractor is saved
as another shared_ptr copy (in an existing field, however) to ensure
the pointer is not recycled.
When the prefix_extractor has changed to a different instance but
same compatible configuration (rare, odd), performance is still a
regression compared to 6.25, but this is likely acceptable because
of the oddity of such a case. The performance of incompatible
prefix_extractor is essentially unchanged.
Also fixed a minor case (ForwardIterator) where a prefix_extractor
could be used via a raw pointer after being freed as a shared_ptr,
if replaced via SetOptions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9407
Test Plan:
## Performance
Populate DB with `TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -benchmarks=fillrandom -num=10000000 -disable_wal=1 -write_buffer_size=10000000 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -prefix_size=12`
Running head-to-head comparisons simultaneously with `TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -use_existing_db -readonly -benchmarks=seekrandom -num=10000000 -duration=20 -disable_wal=1 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -prefix_size=12`
Below each is compared by ops/sec vs. baseline which is version 6.25 (multiple baseline runs because of variable machine load)
v6.26: 4833 vs. 6698 (<- major regression!)
v6.27: 4737 vs. 6397 (still)
New: 6704 vs. 6461 (better than baseline in common case)
Disabled fastpath: 4843 vs. 6389 (e.g. if prefix extractor instance changes but is still compatible)
Changed prefix size (no usable filter) in new: 787 vs. 5927
Changed prefix size (no usable filter) in new & baseline: 773 vs. 784
Reviewed By: mrambacher
Differential Revision: D33677812
Pulled By: pdillinger
fbshipit-source-id: 571d9711c461fb97f957378a061b7e7dbc4d6a76
Summary:
* remove pyenv installation step which is not needed (it takes 3 minutes to install for every job and fail from time to time)
* download compression lib fail from time to time, Uploaded the libs to S3 and download from them for CI, which should be more stable.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9406
Test Plan: CI
Reviewed By: riversand963
Differential Revision: D33700158
Pulled By: jay-zhuang
fbshipit-source-id: be7b172d7cd059c9d7b3139fd7a34f8070460e31
Summary:
Wasn't able to easily reproduce error, but easy to see a race
condition between TestFlushListener::OnFlushCompleted and
DBTestBase::Close(), which frees CF handles before closing DB.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9400
Test Plan: CI etc.
Reviewed By: riversand963
Differential Revision: D33645134
Pulled By: pdillinger
fbshipit-source-id: d0ec914cc43c9e14f53da633876b95b61995138d
Summary:
xcode 11.3.1 is deprecated https://circleci.com/docs/2.0/testing-ios/ , jobs are failing:
```
failed to create host: Image xcode:11.3.0 is not supported
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9405
Test Plan: CI
Reviewed By: ajkr, hx235
Differential Revision: D33674462
Pulled By: jay-zhuang
fbshipit-source-id: 85dd27aad84d26eaaa5c5375015344182b2c50b9
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9404
It is better practice to mark destructors as override. Without this
change there can be issues building with
-Wsuggest-destructor-override.
Reviewed By: riversand963
Differential Revision: D33671992
fbshipit-source-id: 75b0c15010cbab5fbc071c150fef1dc85d5d9d96
