Summary:
Right now return codes by io_uring_submit_and_wait() and io_uring_wait_cqe() are not handled. It is not the good practice. Although these two functions are not supposed to return non-0 values in normal exeuction, people suspect that they might return non-0 value when an interruption happens, and the code might cause hanging.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8311
Test Plan: Make sure at least normal test cases still pass.
Reviewed By: anand1976
Differential Revision: D28500828
fbshipit-source-id: 8a76cea9cafbd041102e0b6a8eef9d0bfed7c211
Summary:
Adds a new Cache::ApplyToAllEntries API that we expect to use
(in follow-up PRs) for efficiently gathering block cache statistics.
Notable features vs. old ApplyToAllCacheEntries:
* Includes key and deleter (in addition to value and charge). We could
have passed in a Handle but then more virtual function calls would be
needed to get the "fields" of each entry. We expect to use the 'deleter'
to identify the origin of entries, perhaps even more.
* Heavily tuned to minimize latency impact on operating cache. It
does this by iterating over small sections of each cache shard while
cycling through the shards.
* Supports tuning roughly how many entries to operate on for each
lock acquire and release, to control the impact on the latency of other
operations without excessive lock acquire & release. The right balance
can depend on the cost of the callback. Good default seems to be
around 256.
* There should be no need to disable thread safety. (I would expect
uncontended locks to be sufficiently fast.)
I have enhanced cache_bench to validate this approach:
* Reports a histogram of ns per operation, so we can look at the
ditribution of times, not just throughput (average).
* Can add a thread for simulated "gather stats" which calls
ApplyToAllEntries at a specified interval. We also generate a histogram
of time to run ApplyToAllEntries.
To make the iteration over some entries of each shard work as cleanly as
possible, even with resize between next set of entries, I have
re-arranged which hash bits are used for sharding and which for indexing
within a shard.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8225
Test Plan:
A couple of unit tests are added, but primary validation is manual, as
the primary risk is to performance.
The primary validation is using cache_bench to ensure that neither
the minor hashing changes nor the simulated stats gathering
significantly impact QPS or latency distribution. Note that adding op
latency histogram seriously impacts the benchmark QPS, so for a
fair baseline, we need the cache_bench changes (except remove simulated
stat gathering to make it compile). In short, we don't see any
reproducible difference in ops/sec or op latency unless we are gathering
stats nearly continuously. Test uses 10GB block cache with
8KB values to be somewhat realistic in the number of items to iterate
over.
Baseline typical output:
```
Complete in 92.017 s; Rough parallel ops/sec = 869401
Thread ops/sec = 54662
Operation latency (ns):
Count: 80000000 Average: 11223.9494 StdDev: 29.61
Min: 0 Median: 7759.3973 Max: 9620500
Percentiles: P50: 7759.40 P75: 14190.73 P99: 46922.75 P99.9: 77509.84 P99.99: 217030.58
------------------------------------------------------
[ 0, 1 ] 68 0.000% 0.000%
( 2900, 4400 ] 89 0.000% 0.000%
( 4400, 6600 ] 33630240 42.038% 42.038% ########
( 6600, 9900 ] 18129842 22.662% 64.700% #####
( 9900, 14000 ] 7877533 9.847% 74.547% ##
( 14000, 22000 ] 15193238 18.992% 93.539% ####
( 22000, 33000 ] 3037061 3.796% 97.335% #
( 33000, 50000 ] 1626316 2.033% 99.368%
( 50000, 75000 ] 421532 0.527% 99.895%
( 75000, 110000 ] 56910 0.071% 99.966%
( 110000, 170000 ] 16134 0.020% 99.986%
( 170000, 250000 ] 5166 0.006% 99.993%
( 250000, 380000 ] 3017 0.004% 99.996%
( 380000, 570000 ] 1337 0.002% 99.998%
( 570000, 860000 ] 805 0.001% 99.999%
( 860000, 1200000 ] 319 0.000% 100.000%
( 1200000, 1900000 ] 231 0.000% 100.000%
( 1900000, 2900000 ] 100 0.000% 100.000%
( 2900000, 4300000 ] 39 0.000% 100.000%
( 4300000, 6500000 ] 16 0.000% 100.000%
( 6500000, 9800000 ] 7 0.000% 100.000%
```
New, gather_stats=false. Median thread ops/sec of 5 runs:
```
Complete in 92.030 s; Rough parallel ops/sec = 869285
Thread ops/sec = 54458
Operation latency (ns):
Count: 80000000 Average: 11298.1027 StdDev: 42.18
Min: 0 Median: 7722.0822 Max: 6398720
Percentiles: P50: 7722.08 P75: 14294.68 P99: 47522.95 P99.9: 85292.16 P99.99: 228077.78
------------------------------------------------------
[ 0, 1 ] 109 0.000% 0.000%
( 2900, 4400 ] 793 0.001% 0.001%
( 4400, 6600 ] 34054563 42.568% 42.569% #########
( 6600, 9900 ] 17482646 21.853% 64.423% ####
( 9900, 14000 ] 7908180 9.885% 74.308% ##
( 14000, 22000 ] 15032072 18.790% 93.098% ####
( 22000, 33000 ] 3237834 4.047% 97.145% #
( 33000, 50000 ] 1736882 2.171% 99.316%
( 50000, 75000 ] 446851 0.559% 99.875%
( 75000, 110000 ] 68251 0.085% 99.960%
( 110000, 170000 ] 18592 0.023% 99.983%
( 170000, 250000 ] 7200 0.009% 99.992%
( 250000, 380000 ] 3334 0.004% 99.997%
( 380000, 570000 ] 1393 0.002% 99.998%
( 570000, 860000 ] 700 0.001% 99.999%
( 860000, 1200000 ] 293 0.000% 100.000%
( 1200000, 1900000 ] 196 0.000% 100.000%
( 1900000, 2900000 ] 69 0.000% 100.000%
( 2900000, 4300000 ] 32 0.000% 100.000%
( 4300000, 6500000 ] 10 0.000% 100.000%
```
New, gather_stats=true, 1 second delay between scans. Scans take about
1 second here so it's spending about 50% time scanning. Still the effect on
ops/sec and latency seems to be in the noise. Median thread ops/sec of 5 runs:
```
Complete in 91.890 s; Rough parallel ops/sec = 870608
Thread ops/sec = 54551
Operation latency (ns):
Count: 80000000 Average: 11311.2629 StdDev: 45.28
Min: 0 Median: 7686.5458 Max: 10018340
Percentiles: P50: 7686.55 P75: 14481.95 P99: 47232.60 P99.9: 79230.18 P99.99: 232998.86
------------------------------------------------------
[ 0, 1 ] 71 0.000% 0.000%
( 2900, 4400 ] 291 0.000% 0.000%
( 4400, 6600 ] 34492060 43.115% 43.116% #########
( 6600, 9900 ] 16727328 20.909% 64.025% ####
( 9900, 14000 ] 7845828 9.807% 73.832% ##
( 14000, 22000 ] 15510654 19.388% 93.220% ####
( 22000, 33000 ] 3216533 4.021% 97.241% #
( 33000, 50000 ] 1680859 2.101% 99.342%
( 50000, 75000 ] 439059 0.549% 99.891%
( 75000, 110000 ] 60540 0.076% 99.967%
( 110000, 170000 ] 14649 0.018% 99.985%
( 170000, 250000 ] 5242 0.007% 99.991%
( 250000, 380000 ] 3260 0.004% 99.995%
( 380000, 570000 ] 1599 0.002% 99.997%
( 570000, 860000 ] 1043 0.001% 99.999%
( 860000, 1200000 ] 471 0.001% 99.999%
( 1200000, 1900000 ] 275 0.000% 100.000%
( 1900000, 2900000 ] 143 0.000% 100.000%
( 2900000, 4300000 ] 60 0.000% 100.000%
( 4300000, 6500000 ] 27 0.000% 100.000%
( 6500000, 9800000 ] 7 0.000% 100.000%
( 9800000, 14000000 ] 1 0.000% 100.000%
Gather stats latency (us):
Count: 46 Average: 980387.5870 StdDev: 60911.18
Min: 879155 Median: 1033777.7778 Max: 1261431
Percentiles: P50: 1033777.78 P75: 1120666.67 P99: 1261431.00 P99.9: 1261431.00 P99.99: 1261431.00
------------------------------------------------------
( 860000, 1200000 ] 45 97.826% 97.826% ####################
( 1200000, 1900000 ] 1 2.174% 100.000%
Most recent cache entry stats:
Number of entries: 1295133
Total charge: 9.88 GB
Average key size: 23.4982
Average charge: 8.00 KB
Unique deleters: 3
```
Reviewed By: mrambacher
Differential Revision: D28295742
Pulled By: pdillinger
fbshipit-source-id: bbc4a552f91ba0fe10e5cc025c42cef5a81f2b95
Summary:
This change enables a couple of things:
- Different ConfigOptions can have different registry/factory associated with it, thereby allowing things like a "Test" ConfigOptions versus a "Production"
- The ObjectRegistry is created fewer times and can be re-used
The ConfigOptions can also be initialized/constructed from a DBOptions, in which case it will grab some of its settings (Env, Logger) from the DBOptions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8166
Reviewed By: zhichao-cao
Differential Revision: D27657952
Pulled By: mrambacher
fbshipit-source-id: ae1d6200bb7ab127405cdeefaba43c7fe694dfdd
Summary:
The WBWI has two differing modes of operation dependent on the value
of the constructor parameter `overwrite_key`.
Currently, regardless of the parameter, neither mode performs as
expected when using Merge. This PR remedies this by correctly invoking
the appropriate Merge Operator before returning results from the WBWI.
Examples of issues that exist which are solved by this PR:
## Example 1 with `overwrite_key=false`
Currently, from an empty database, the following sequence:
```
Put('k1', 'v1')
Merge('k1', 'v2')
Get('k1')
```
Incorrectly yields `v2`, that is to say that the Merge behaves like a Put.
## Example 2 with o`verwrite_key=true`
Currently, from an empty database, the following sequence:
```
Put('k1', 'v1')
Merge('k1', 'v2')
Get('k1')
```
Incorrectly yields `ERROR: kMergeInProgress`.
## Example 3 with `overwrite_key=false`
Currently, with a database containing `('k1' -> 'v1')`, the following sequence:
```
Merge('k1', 'v2')
GetFromBatchAndDB('k1')
```
Incorrectly yields `v1,v2`
## Example 4 with `overwrite_key=true`
Currently, with a database containing `('k1' -> 'v1')`, the following sequence:
```
Merge('k1', 'v1')
GetFromBatchAndDB('k1')
```
Incorrectly yields `ERROR: kMergeInProgress`.
## Example 5 with `overwrite_key=false`
Currently, from an empty database, the following sequence:
```
Put('k1', 'v1')
Merge('k1', 'v2')
GetFromBatchAndDB('k1')
```
Incorrectly yields `v1,v2`
## Example 6 with `overwrite_key=true`
Currently, from an empty database, `('k1' -> 'v1')`, the following sequence:
```
Put('k1', 'v1')
Merge('k1', 'v2')
GetFromBatchAndDB('k1')
```
Incorrectly yields `ERROR: kMergeInProgress`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8135
Reviewed By: pdillinger
Differential Revision: D27657938
Pulled By: mrambacher
fbshipit-source-id: 0fbda6bbc66bedeba96a84786d90141d776297df
Summary:
Per previous discussion, change date format in HISTORY.md to follow ISO 8601.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8278
Reviewed By: jay-zhuang
Differential Revision: D28294022
fbshipit-source-id: 563f29c56143519b4a871df82a17dd0a168a578c
Summary:
From HISTORY.md release note:
- Allow `CompactionFilter`s to apply in more table file creation scenarios such as flush and recovery. For compatibility, `CompactionFilter`s by default apply during compaction. Users can customize this behavior by overriding `CompactionFilterFactory::ShouldFilterTableFileCreation()`.
- Removed unused structure `CompactionFilterContext`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8243
Test Plan: added unit tests
Reviewed By: pdillinger
Differential Revision: D28088089
Pulled By: ajkr
fbshipit-source-id: 0799be7908e3b39fea09fc3f1ab00e13ad817fae
Summary:
An early design of BackupEngine used stackable DB, so I guess a
DB had to opt-in to being backupable. Unfortunately the naming of that
obsolete design still infects our public API and implementation.
This change fixes the public API, with a deprecated
backward-compatibility header. `BackupableDBOptions` is renamed to
`BackupEngineOptions` (copy-replace in the public header) and
backup_engine.h replaces backupable_db.h (present for backward
compatibility). The only other change in backupable_db.h ->
backup_engine.h is cleaning up headers.
Later changes will fix the internal implementation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8274
Test Plan:
The internal implementation of BackupEngine uses the name
BackupEngineOptions, while the unit tests use the old name
BackupableDBOptions. This gives me confidence that both still work.
Reviewed By: mrambacher
Differential Revision: D28259471
Pulled By: pdillinger
fbshipit-source-id: a25dbe327b9772143488e7bb0ec7139ee42d0613
Summary:
Larger arena block size does provide the benefit of reducing allocation overhead, however it may cause other troubles. For example, allocator is more likely not to allocate them to physical memory and trigger page fault. Weighing the risk, we cap the arena block size to 1MB. Users can always use a larger value if they want.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7907
Test Plan: Run all existing tests
Reviewed By: pdillinger
Differential Revision: D26135269
fbshipit-source-id: b7f55afd03e6ee1d8715f90fa11b6c33944e9ea8
Summary:
In testing for https://github.com/facebook/rocksdb/issues/8225 I found cache_bench would crash with
-use_clock_cache, as well as db_bench -use_clock_cache, but not
single-threaded. Smaller cache size hits failure much faster. ASAN
reported the failuer as calling malloc_usable_size on the `key` pointer
of a ClockCache handle after it was reportedly freed. On detailed
inspection I found this bad sequence of operations for a cache entry:
state=InCache=1,refs=1
[thread 1] Start ClockCacheShard::Unref (from Release, no mutex)
[thread 1] Decrement ref count
state=InCache=1,refs=0
[thread 1] Suspend before CalcTotalCharge (no mutex)
[thread 2] Start UnsetInCache (from Insert, mutex held)
[thread 2] clear InCache bit
state=InCache=0,refs=0
[thread 2] Calls RecycleHandle (based on pre-updated state)
[thread 2] Returns to Insert which calls Cleanup which deletes `key`
[thread 1] Resume ClockCacheShard::Unref
[thread 1] Read `key` in CalcTotalCharge
To fix this, I've added a field to the handle to store the metadata
charge so that we can efficiently remember everything we need from
the handle in Unref. We must not read from the handle again if we
decrement the count to zero with InCache=1, which means we don't own
the entry and someone else could eject/overwrite it immediately.
Note before this change, on amd64 sizeof(Handle) == 56 even though there
are only 48 bytes of data. Grouping together the uint32_t fields would
cut it down to 48, but I've added another uint32_t, which takes it
back up to 56. Not a big deal.
Also fixed DisownData to cooperate with ASAN as in LRUCache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8261
Test Plan:
Manual + adding use_clock_cache to db_crashtest.py
Base performance
./cache_bench -use_clock_cache
Complete in 17.060 s; QPS = 2458513
New performance
./cache_bench -use_clock_cache
Complete in 17.052 s; QPS = 2459695
Any difference is easily buried in small noise.
Crash test shows still more bug(s) in ClockCache, so I'm expecting to
disable ClockCache from production code in a follow-up PR (if we
can't find and fix the bug(s))
Reviewed By: mrambacher
Differential Revision: D28207358
Pulled By: pdillinger
fbshipit-source-id: aa7a9322afc6f18f30e462c75dbbe4a1206eb294
Summary:
Add `num_levels`, `is_bottommost`, and table file creation
`reason` to `FilterBuildingContext`, in anticipation of more powerful
Bloom-like filter support.
To support this, added `is_bottommost` and `reason` to
`TableBuilderOptions`, which allowed removing `reason` parameter from
`rocksdb::BuildTable`.
I attempted to remove `skip_filters` from `TableBuilderOptions`, because
filter construction decisions should arise from options, not one-off
parameters. I could not completely remove it because the public API for
SstFileWriter takes a `skip_filters` parameter, and translating this
into an option change would mean awkwardly replacing the table_factory
if it is BlockBasedTableFactory with new filter_policy=nullptr option.
I marked this public skip_filters option as deprecated because of this
oddity. (skip_filters on the read side probably makes sense.)
At least `skip_filters` is now largely hidden for users of
`TableBuilderOptions` and is no longer used for implementing the
optimize_filters_for_hits option. Bringing the logic for that option
closer to handling of FilterBuildingContext makes it more obvious that
hese two are using the same notion of "bottommost." (Planned:
configuration options for Bloom-like filters that generalize
`optimize_filters_for_hits`)
Recommended follow-up: Try to get away from "bottommost level" naming of
things, which is inaccurate (see
VersionStorageInfo::RangeMightExistAfterSortedRun), and move to
"bottommost run" or just "bottommost."
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8246
Test Plan:
extended an existing unit test to exercise and check various
filter building contexts. Also, existing tests for
optimize_filters_for_hits validate some of the "bottommost" handling,
which is now closely connected to FilterBuildingContext::is_bottommost
through TableBuilderOptions::is_bottommost
Reviewed By: mrambacher
Differential Revision: D28099346
Pulled By: pdillinger
fbshipit-source-id: 2c1072e29c24d4ac404c761a7b7663292372600a
Summary:
Greatly reduced the not-quite-copy-paste giant parameter lists
of rocksdb::NewTableBuilder, rocksdb::BuildTable,
BlockBasedTableBuilder::Rep ctor, and BlockBasedTableBuilder ctor.
Moved weird separate parameter `uint32_t column_family_id` of
TableFactory::NewTableBuilder into TableBuilderOptions.
Re-ordered parameters to TableBuilderOptions ctor, so that `uint64_t
target_file_size` is not randomly placed between uint64_t timestamps
(was easy to mix up).
Replaced a couple of fields of BlockBasedTableBuilder::Rep with a
FilterBuildingContext. The motivation for this change is making it
easier to pass along more data into new fields in FilterBuildingContext
(follow-up PR).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8240
Test Plan: ASAN make check
Reviewed By: mrambacher
Differential Revision: D28075891
Pulled By: pdillinger
fbshipit-source-id: fddb3dbb8260a0e8bdcbb51b877ebabf9a690d4f
Summary:
BlockPrefetcher is used by iterators to prefetch data if they
anticipate more data to be used in future and this is valid for forward sequential
scans. But BlockPrefetcher tracks only num_file_reads_ and not if reads
are sequential. This presents problem for MultiGet with large number of
keys when it reseeks index iterator and data block. FilePrefetchBuffer
can end up doing large readahead for reseeks as readahead size
increases exponentially once readahead is enabled. Same issue is with
BlockBasedTableIterator.
Add previous length and offset read as well in BlockPrefetcher (creates
FilePrefetchBuffer) and FilePrefetchBuffer (does prefetching of data) to
determine if reads are sequential and then prefetch.
Update the last block read after cache hit to take reads from cache also
in account.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7394
Test Plan: Add new unit test case
Reviewed By: anand1976
Differential Revision: D23737617
Pulled By: akankshamahajan15
fbshipit-source-id: 8e6917c25ed87b285ee495d1b68dc623d71205a3
Summary:
In current RocksDB, in recover the information form WAL, we do the consistency check for each column family when one WAL file is corrupted and PointInTimeRecovery is set. However, it will report a false positive alert on "SST file is ahead of WALs" when one of the CF current log number is greater than the corrupted WAL number (CF contains the data beyond the corrupted WAl) due to a new column family creation during flush. In this case, a new WAL is created (it is empty) during a flush. Also, due to some reason (e.g., storage issue or crash happens before SyncCloseLog is called), the old WAL is corrupted. The new CF has no data, therefore, it does not have the consistency issue.
Fix: when checking cfd->GetLogNumber() > corrupted_wal_number also check cfd->GetLiveSstFilesSize() > 0. So the CFs with no SST file data will skip the check here.
Note potential ignored inconsistency caused due to fix: empty CF can also be caused by write+delete. In this case, after flush, there is no SST files being generated. However, this CF still have the log in the WAL. When the WAL is corrupted, the DB might be inconsistent.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8207
Test Plan: added unit test, make crash_test
Reviewed By: riversand963
Differential Revision: D27898839
Pulled By: zhichao-cao
fbshipit-source-id: 931fc2d8b92dd00b4169bf84b94e712fd688a83e
Summary:
When WriteBufferManager is shared across DBs and column families
to maintain memory usage under a limit, OOMs have been observed when flush cannot
finish but writes continuously insert to memtables.
In order to avoid OOMs, when memory usage goes beyond buffer_limit_ and DBs tries to write,
this change will stall incoming writers until flush is completed and memory_usage
drops.
Design: Stall condition: When total memory usage exceeds WriteBufferManager::buffer_size_
(memory_usage() >= buffer_size_) WriterBufferManager::ShouldStall() returns true.
DBImpl first block incoming/future writers by calling write_thread_.BeginWriteStall()
(which adds dummy stall object to the writer's queue).
Then DB is blocked on a state State::Blocked (current write doesn't go
through). WBStallInterface object maintained by every DB instance is added to the queue of
WriteBufferManager.
If multiple DBs tries to write during this stall, they will also be
blocked when check WriteBufferManager::ShouldStall() returns true.
End Stall condition: When flush is finished and memory usage goes down, stall will end only if memory
waiting to be flushed is less than buffer_size/2. This lower limit will give time for flush
to complete and avoid continous stalling if memory usage remains close to buffer_size.
WriterBufferManager::EndWriteStall() is called,
which removes all instances from its queue and signal them to continue.
Their state is changed to State::Running and they are unblocked. DBImpl
then signal all incoming writers of that DB to continue by calling
write_thread_.EndWriteStall() (which removes dummy stall object from the
queue).
DB instance creates WBMStallInterface which is an interface to block and
signal DBs during stall.
When DB needs to be blocked or signalled by WriteBufferManager,
state_for_wbm_ state is changed accordingly (RUNNING or BLOCKED).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7898
Test Plan: Added a new test db/db_write_buffer_manager_test.cc
Reviewed By: anand1976
Differential Revision: D26093227
Pulled By: akankshamahajan15
fbshipit-source-id: 2bbd982a3fb7033f6de6153aa92a221249861aae
Summary:
This partially reverts commit 10196d7edc.
The problem with this change is because of important filter use cases:
FIFO compaction and SST writer. FIFO "compaction" always uses level 0 so
would only use Ribbon filters if specifically including level 0 for the
Ribbon filter policy. SST writer sets level_at_creation=-1 to indicate
unknown level, and this would be treated the same as level 0 unless
fixed.
We are keeping the part about committing to permanent schema, which is
only changes to API comments and HISTORY.md.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8212
Test Plan: CI
Reviewed By: jay-zhuang
Differential Revision: D27896468
Pulled By: pdillinger
fbshipit-source-id: 50a775f7cba5d64fb729d9b982e355864020596e
Summary:
Fixes https://github.com/facebook/rocksdb/issues/6245.
Adapted from https://github.com/facebook/rocksdb/issues/8201 and https://github.com/facebook/rocksdb/issues/8205.
Previously we were writing the ingested file's smallest/largest internal keys
with sequence number zero, or `kMaxSequenceNumber` in case of range
tombstone. The former (sequence number zero) is incorrect and can lead
to files being incorrectly ordered. The fix in this PR is to overwrite
boundary keys that have sequence number zero with the ingested file's assigned
sequence number.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8209
Test Plan: repro unit test
Reviewed By: riversand963
Differential Revision: D27885678
Pulled By: ajkr
fbshipit-source-id: 4a9f2c6efdfff81c3a9923e915ea88b250ee7b6a
Summary:
In a distributed environment, a file `rename()` operation can succeed on server (remote)
side, but the client can somehow return non-ok status to RocksDB. Possible reasons include
network partition, connection issue, etc. This happens in `rocksdb::SetCurrentFile()`, which
can be called in `LogAndApply() -> ProcessManifestWrites()` if RocksDB tries to switch to a
new MANIFEST. We currently always delete the new MANIFEST if an error occurs.
This is problematic in distributed world. If the server-side successfully updates the CURRENT
file via renaming, then a subsequent `DB::Open()` will try to look for the new MANIFEST and fail.
As a fix, we can track the execution result of IO operations on the new MANIFEST.
- If IO operations on the new MANIFEST fail, then we know the CURRENT must point to the original
MANIFEST. Therefore, it is safe to remove the new MANIFEST.
- If IO operations on the new MANIFEST all succeed, but somehow we end up in the clean up
code block, then we do not know whether CURRENT points to the new or old MANIFEST. (For local
POSIX-compliant FS, it should still point to old MANIFEST, but it does not matter if we keep the
new MANIFEST.) Therefore, we keep the new MANIFEST.
- Any future `LogAndApply()` will switch to a new MANIFEST and update CURRENT.
- If process reopens the db immediately after the failure, then the CURRENT file can point
to either the new MANIFEST or the old one, both of which exist. Therefore, recovery can
succeed and ignore the other.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8192
Test Plan: make check
Reviewed By: zhichao-cao
Differential Revision: D27804648
Pulled By: riversand963
fbshipit-source-id: 9c16f2a5ce41bc6aadf085e48449b19ede8423e4
Summary:
Since the Ribbon filter schema seems good (compatible back to
6.15.0), this change commits to long term support of the SST schema,
even though we expect the API for enabling Ribbon to change (still
called NewExperimentalRibbonFilterPolicy).
This also adds support for "hybrid" configuration in which some levels
use Bloom (higher levels, lower numbered) for speed and the rest use
Ribbon (lower levels, higher numbered) for memory space efficiency.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8198
Test Plan: unit test added, crash test support
Reviewed By: jay-zhuang
Differential Revision: D27831232
Pulled By: pdillinger
fbshipit-source-id: 90e528677689474d293ed6710b42ba89fbd5b5ab
Summary:
Extend the DB::GetLiveFilesChecksumInfo API to blob files.
This API is also used by the file_checksum_dump ldb command to dump checksum
of SST files which now also dumps blob files checksum.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8179
Test Plan: Add new unit test
Reviewed By: zhichao-cao
Differential Revision: D27714965
Pulled By: akankshamahajan15
fbshipit-source-id: d8b7343ea845a64c83800336d88cced7152a8c92
Summary:
Resolves https://github.com/facebook/rocksdb/issues/8014
- Add an assertion on `DB::Open` to ensure `db_options.max_open_files` is unlimited if FIFO Compaction is being used.
- This is to align with what the docs mention and to prevent premature data deletion.
- Update tests to work with this assertion.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8172
Test Plan:
```bash
$ make check -j$(nproc)
Generated TARGETS Summary:
- 6 libs
- 0 binarys
- 180 tests
```
Reviewed By: ajkr
Differential Revision: D27768792
Pulled By: thejchap
fbshipit-source-id: cf6350535e3a3577fec72bcba75b3c094dc7a6f3
Summary:
Before this PR, `get_iostats_context()` will silently return a nullptr if no thread_local support is detected.
This can be the result of build_detect_platform's failure to compile the simple code snippet on certain platforms, as
reported in https://github.com/facebook/mysql-5.6/issues/904.
To be safe, we should fail the compilation if user does not opt out IOStatsContext and
ROCKSDB_SUPPORT_THREAD_LOCAL is not defined.
If RocksDB relies on c++11, can we just always use thread_local? It turns out there might be
performance concerns (https://github.com/facebook/rocksdb/issues/5774),
which is beyond the scope of this PR. We can revisit this later. Here, we stick to the original impl.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8117
Reviewed By: ajkr
Differential Revision: D27356847
Pulled By: riversand963
fbshipit-source-id: f7d5776842277598d8341b955febb601946801ae
Summary:
* CreateNewBackup(WithMetadata) returning the BackupID of new backup
through optional new output param. This is especially useful with the
new mutithreading support, so that you can transactionally determine the
ID of a backup you create.
* GetBackupInfo / GetLatestBackupInfo for individual backups, so that
you don't have to comb through a vector of backups if you don't want to.
Updated HISTORY.md (including re: BlobDB support as new feature)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8170
Test Plan:
Added test logic to existing tests, to minimize increase in
cost of running tests
Reviewed By: zhichao-cao
Differential Revision: D27680410
Pulled By: pdillinger
fbshipit-source-id: 1fc45b73d81aae293ccd4a43d9583d7fd915d3eb
Summary:
Current flush reason attribution is misleading or incorrect (depending on what the original intention was):
- Flush due to WAL reaching its maximum size is attributed to `kWriteBufferManager`
- Flushes due to full write buffer and write buffer manager are not distinguishable, both are attributed to `kWriteBufferFull`
This changes the first to a new flush reason `kWALFull`, and splits the second between `kWriteBufferManager` and `kWriteBufferFull`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8150
Reviewed By: zhichao-cao
Differential Revision: D27569645
Pulled By: ot
fbshipit-source-id: 7e3c8ca186a6e71976e6b8e937297eebd4b769cc
Summary:
Add support for blob files for backup/restore like table files.
Since DB session ID is currently not supported for blob files (there is no place to store it in
the header), so for blob files uses the
kLegacyCrc32cAndFileSize naming scheme even if
share_files_with_checksum_naming is set to kUseDbSessionId.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8129
Test Plan: Add new test units
Reviewed By: ltamasi
Differential Revision: D27408510
Pulled By: akankshamahajan15
fbshipit-source-id: b27434d189a639ef3e6ad165c61a143a2daaf06e
Summary:
A current limitation of backups is that you don't know the
exact database state of when the backup was taken. With this new
feature, you can at least inspect the backup's DB state without
restoring it by opening it as a read-only DB.
Rather than add something like OpenAsReadOnlyDB to the BackupEngine API,
which would inhibit opening stackable DB implementations read-only
(if/when their APIs support it), we instead provide a DB name and Env
that can be used to open as a read-only DB.
Possible follow-up work:
* Add a version of GetBackupInfo for a single backup.
* Let CreateNewBackup return the BackupID of the newly-created backup.
Implementation details:
Refactored ChrootFileSystem to split off new base class RemapFileSystem,
which allows more general remapping of files. We use this base class to
implement BackupEngineImpl::RemapSharedFileSystem.
To minimize API impact, I decided to just add these fields `name_for_open`
and `env_for_open` to those set by GetBackupInfo when
include_file_details=true. Creating the RemapSharedFileSystem adds a bit
to the memory consumption, perhaps unnecessarily in some cases, but this
has been mitigated by (a) only initialize the RemapSharedFileSystem
lazily when GetBackupInfo with include_file_details=true is called, and
(b) using the existing `shared_ptr<FileInfo>` objects to hold most of the
mapping data.
To enhance API safety, RemapSharedFileSystem is wrapped by new
ReadOnlyFileSystem which rejects any attempts to write. This uncovered a
couple of places in which DB::OpenForReadOnly would write to the
filesystem, so I fixed these. Added a release note because this affects
logging.
Additional minor refactoring in backupable_db.cc to support the new
functionality.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8142
Test Plan:
new test (run with ASAN and UBSAN), added to stress test and
ran it for a while with amplified backup_one_in
Reviewed By: ajkr
Differential Revision: D27535408
Pulled By: pdillinger
fbshipit-source-id: 04666d310aa0261ef6b2385c43ca793ce1dfd148
Summary:
According to https://github.com/facebook/rocksdb/issues/5907, each filter partition "should include the bloom of the prefix of the last
key in the previous partition" so that SeekForPrev() in prefix mode can return correct result.
The prefix of the last key in the previous partition does not necessarily have the same prefix
as the first key in the current partition. Regardless of the first key in current partition, the
prefix of the last key in the previous partition should be added. The existing code, however,
does not follow this. Furthermore, there is another issue: when finishing current filter partition,
`FullFilterBlockBuilder::AddPrefix()` is called for the first key in next filter partition, which effectively
overwrites `last_prefix_str_` prematurely. Consequently, when the filter block builder proceeds
to the next partition, `last_prefix_str_` will be the prefix of its first key, leaving no way of adding
the bloom of the prefix of the last key of the previous partition.
Prefix extractor is FixedLength.2.
```
[ filter part 1 ] [ filter part 2 ]
abc d
```
When SeekForPrev("abcd"), checking the filter partition will land on filter part 2 because "abcd" > "abc"
but smaller than "d".
If the filter in filter part 2 happens to return false for the test for "ab", then SeekForPrev("abcd") will build
incorrect iterator tree in non-total-order mode.
Also fix a unit test which starts to fail following this PR. `InDomain` should not fail due to assertion
error when checking on an arbitrary key.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8137
Test Plan:
```
make check
```
Without this fix, the following command will fail pretty soon.
```
./db_stress --acquire_snapshot_one_in=10000 --avoid_flush_during_recovery=0 \
--avoid_unnecessary_blocking_io=0 --backup_max_size=104857600 --backup_one_in=0 \
--batch_protection_bytes_per_key=0 --block_size=16384 --bloom_bits=17 \
--bottommost_compression_type=disable --cache_index_and_filter_blocks=1 --cache_size=1048576 \
--checkpoint_one_in=0 --checksum_type=kxxHash64 --clear_column_family_one_in=0 \
--compact_files_one_in=1000000 --compact_range_one_in=1000000 --compaction_ttl=0 \
--compression_max_dict_buffer_bytes=0 --compression_max_dict_bytes=0 \
--compression_parallel_threads=1 --compression_type=zstd --compression_zstd_max_train_bytes=0 \
--continuous_verification_interval=0 --db=/dev/shm/rocksdb/rocksdb_crashtest_whitebox \
--db_write_buffer_size=8388608 --delpercent=5 --delrangepercent=0 --destroy_db_initially=0 --enable_blob_files=0 \
--enable_compaction_filter=0 --enable_pipelined_write=1 --file_checksum_impl=big --flush_one_in=1000000 \
--format_version=5 --get_current_wal_file_one_in=0 --get_live_files_one_in=1000000 --get_property_one_in=1000000 \
--get_sorted_wal_files_one_in=0 --index_block_restart_interval=4 --index_type=2 --ingest_external_file_one_in=0 \
--iterpercent=10 --key_len_percent_dist=1,30,69 --level_compaction_dynamic_level_bytes=True \
--log2_keys_per_lock=10 --long_running_snapshots=1 --mark_for_compaction_one_file_in=0 \
--max_background_compactions=20 --max_bytes_for_level_base=10485760 --max_key=100000000 --max_key_len=3 \
--max_manifest_file_size=1073741824 --max_write_batch_group_size_bytes=16777216 --max_write_buffer_number=3 \
--max_write_buffer_size_to_maintain=8388608 --memtablerep=skip_list --mmap_read=1 --mock_direct_io=False \
--nooverwritepercent=0 --open_files=500000 --ops_per_thread=20000000 --optimize_filters_for_memory=0 --paranoid_file_checks=1 --partition_filters=1 --partition_pinning=0 --pause_background_one_in=1000000 \
--periodic_compaction_seconds=0 --prefixpercent=5 --progress_reports=0 --read_fault_one_in=0 --read_only=0 \
--readpercent=45 --recycle_log_file_num=0 --reopen=20 --secondary_catch_up_one_in=0 \
--snapshot_hold_ops=100000 --sst_file_manager_bytes_per_sec=104857600 \
--sst_file_manager_bytes_per_truncate=0 --subcompactions=2 --sync=0 --sync_fault_injection=False \
--target_file_size_base=2097152 --target_file_size_multiplier=2 --test_batches_snapshots=0 --test_cf_consistency=0 \
--top_level_index_pinning=0 --unpartitioned_pinning=1 --use_blob_db=0 --use_block_based_filter=0 \
--use_direct_io_for_flush_and_compaction=0 --use_direct_reads=0 --use_full_merge_v1=0 --use_merge=0 \
--use_multiget=0 --use_ribbon_filter=0 --use_txn=0 --user_timestamp_size=8 --verify_checksum=1 \
--verify_checksum_one_in=1000000 --verify_db_one_in=100000 --write_buffer_size=4194304 \
--write_dbid_to_manifest=1 --writepercent=35
```
Reviewed By: pdillinger
Differential Revision: D27553054
Pulled By: riversand963
fbshipit-source-id: 60e391e4a2d8d98a9a3172ec5d6176b90ec3de98
Summary:
Add request_id in IODebugContext which will be populated by
underlying FileSystem for IOTracing purposes. Update IOTracer to trace
request_id in the tracing records. Provided API
IODebugContext::SetRequestId which will set the request_id and enable
tracing for request_id. The API hides the implementation and underlying
file system needs to call this API directly.
Update DB::StartIOTrace API and remove redundant Env* from the
argument as its not used and DB already has Env that is passed down to
IOTracer.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8045
Test Plan: Update unit test.
Differential Revision: D26899871
Pulled By: akankshamahajan15
fbshipit-source-id: 56adef52ee5af0fb3060b607c3af1ec01635fa2b
Summary:
Return early in case there are zero data blocks when
`BlockBasedTableBuilder::EnterUnbuffered()` is called. This crash can
only be triggered by applying dictionary compression to SST files that
contain only range tombstones. It cannot be triggered by a low buffer
limit alone since we only consider entering unbuffered mode after
buffering a data block causing the limit to be breached, or `Finish()`ing the file. It also cannot
be triggered by a totally empty file because those go through
`Abandon()` rather than `Finish()` so unbuffered mode is never entered.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8141
Test Plan: added a unit test that repro'd the "Floating point exception"
Reviewed By: riversand963
Differential Revision: D27495640
Pulled By: ajkr
fbshipit-source-id: a463cfba476919dc5c5c380800a75a86c31ffa23
Summary:
Added `TableProperties::{fast,slow}_compression_estimated_data_size`.
These properties are present in block-based tables when
`ColumnFamilyOptions::sample_for_compression > 0` and the necessary
compression library is supported when the file is generated. They
contain estimates of what `TableProperties::data_size` would be if the
"fast"/"slow" compression library had been used instead. One
limitation is we do not record exactly which "fast" (ZSTD or Zlib)
or "slow" (LZ4 or Snappy) compression library produced the result.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8139
Test Plan:
- new unit test
- ran `db_bench` with `sample_for_compression=1`; verified the `data_size` property matches the `{slow,fast}_compression_estimated_data_size` when the same compression type is used for the output file compression and the sampled compression
Reviewed By: riversand963
Differential Revision: D27454338
Pulled By: ajkr
fbshipit-source-id: 9529293de93ddac7f03b2e149d746e9f634abac4
Summary:
In DBImpl::CloseHelper, we wait for bg_compaction_scheduled_
and bg_flush_scheduled_ to drop to 0. Unschedule is called prior
to cancel any unscheduled flushes/compactions. It is assumed that
anything in the high priority is a flush, and anything in the low
priority pool is a compaction. This assumption, however, is broken when
the high-pri pool is full.
As a result, bg_compaction_scheduled_ can go < 0 and bg_flush_scheduled_
will remain > 0 and DB can be in hang state.
The fix is, we decrement the `bg_{flush,compaction,bottom_compaction}_scheduled_`
inside the `Unschedule{Flush,Compaction,BottomCompaction}Callback()`s. DB
`mutex_` will make the counts atomic in `Unschedule`.
Related discussion: https://github.com/facebook/rocksdb/issues/7928
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8125
Test Plan: Added new test case which hangs without the fix.
Reviewed By: jay-zhuang
Differential Revision: D27390043
Pulled By: ajkr
fbshipit-source-id: 78a367fba9a59ac5607ad24bd1c46dc16d5ec110
Summary:
BackupEngine previously had unclear but strict concurrency
requirements that the API user must follow for safe use. Now we make
that clear, by separating operations into "Read," "Append," and "Write"
operations, and specifying which combinations are safe across threads on
the same BackupEngine object (previously none; now all, using a
read-write lock), and which are safe across different BackupEngine
instances open on the same backup_dir.
The changes to backupable_db.h should be backward compatible. It is
mostly about eliminating copies of what should be the same function and
(unsurprisingly) useful documentation comments were often placed on
only one of the two copies. With the re-organization, we are also
grouping different categories of operations. In the future we might add
BackupEngineReadAppendOnly, but that didn't seem necessary.
To mark API Read operations 'const', I had to mark some implementation
functions 'const' and some fields mutable.
Functional changes:
* Added RWMutex locking around public API functions to implement thread
safety on a single object. To avoid future bugs, this is another
internal class layered on top (removing many "override" in
BackupEngineImpl). It would be possible to allow more concurrency
between operations, rather than mutual exclusion, but IMHO not worth the
work.
* Fixed a race between Open() (Initialize()) and CreateNewBackup() for
different objects on the same backup_dir, where Initialize() could
delete the temporary meta file created during CreateNewBackup().
(This was found by the new test.)
Also cleaned up a couple of "status checked" TODOs, and improved a
checksum mismatch error message to include involved files.
Potential follow-up work:
* CreateNewBackup has an API wart because it doesn't tell you the
BackupID it just created, which makes it of limited use in a multithreaded
setting.
* We could also consider a Refresh() function to catch up to
changes made from another BackupEngine object to the same dir.
* Use a lock file to prevent multiple writer BackupEngines, but this
won't work on remote filesystems not supporting lock files.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8115
Test Plan:
new mini-stress test in backup unit tests, run with gcc,
clang, ASC, TSAN, and UBSAN, 100 iterations each.
Reviewed By: ajkr
Differential Revision: D27347589
Pulled By: pdillinger
fbshipit-source-id: 28d82ed2ac672e44085a739ddb19d297dad14b15
Summary:
Previously it only applied to block-based tables generated by flush. This restriction
was undocumented and blocked a new use case. Now compression sampling
applies to all block-based tables we generate when it is enabled.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8105
Test Plan: new unit test
Reviewed By: riversand963
Differential Revision: D27317275
Pulled By: ajkr
fbshipit-source-id: cd9fcc5178d6515e8cb59c6facb5ac01893cb5b0
Summary:
`strerror()` is not thread-safe, using `strerror_r()` instead. The API could be different on the different platforms, used the code from 0deef031cb/folly/String.cpp (L457)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8087
Reviewed By: mrambacher
Differential Revision: D27267151
Pulled By: jay-zhuang
fbshipit-source-id: 4b8856d1ec069d5f239b764750682c56e5be9ddb
Summary:
Add the new Append and PositionedAppend API to env WritableFile. User is able to benefit from the write checksum handoff API when using the legacy Env classes. FileSystem already implemented the checksum handoff API.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8071
Test Plan: make check, added new unit test.
Reviewed By: anand1976
Differential Revision: D27177043
Pulled By: zhichao-cao
fbshipit-source-id: 430c8331fc81099fa6d00f4fff703b68b9e8080e
Summary:
In previous codebase, if WAL is used, all the retryable IO Error will be treated as hard error. So write is stalled. In this PR, the retryable IO error from WAL sync is separated from SST file flush io error. If WAL Sync is ok and retryable IO Error only happens during SST flush, the error is mapped to soft error. So user can continue insert to Memtable and append to WAL.
Resolve the bug that if WAL sync fails, the memtable status does not roll back due to calling PickMemtable early than calling and checking SyncClosedLog.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8049
Test Plan: added new unit test, make check
Reviewed By: anand1976
Differential Revision: D26965529
Pulled By: zhichao-cao
fbshipit-source-id: f5fecb66602212523c92ee49d7edcb6065982410
Summary:
WriteController had a number of issues:
* It could introduce a delay of 1ms even if the write rate never exceeded the
configured delayed_write_rate.
* The DB-wide delayed_write_rate could be exceeded in a number of ways
with multiple column families:
* Wiping all pending delay "debts" when another column family joins
the delay with GetDelayToken().
* Resetting last_refill_time_ to (now + sleep amount) means each
column family can write with delayed_write_rate for large writes.
* Updating bytes_left_ for a partial refill without updating
last_refill_time_ would essentially give out random bonuses,
especially to medium-sized writes.
Now the code is much simpler, with these issues fixed. See comments in
the new code and new (replacement) tests.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8064
Test Plan: new tests, better than old tests
Reviewed By: mrambacher
Differential Revision: D27064936
Pulled By: pdillinger
fbshipit-source-id: 497c23fe6819340b8f3d440bd634d8a2bc47323f
Summary:
Add statistics and info log for error handler: counters for bg error, bg io error, bg retryable io error, auto resume, auto resume total retry, and auto resume sucess; Histogram for auto resume retry count in each recovery call.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8050
Test Plan: make check and add test to error_handler_fs_test
Reviewed By: anand1976
Differential Revision: D26990565
Pulled By: zhichao-cao
fbshipit-source-id: 49f71e8ea4e9db8b189943976404205b56ab883f
Summary:
Extend support to track blob files in SST File manager.
This PR notifies SstFileManager whenever a new blob file is created,
via OnAddFile and an obsolete blob file deleted via OnDeleteFile
and delete file via ScheduleFileDeletion.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8037
Test Plan: Add new unit tests
Reviewed By: ltamasi
Differential Revision: D26891237
Pulled By: akankshamahajan15
fbshipit-source-id: 04c69ccfda2a73782fd5c51982dae58dd11979b6
Summary:
The new options are:
* compact0 - compact L0 into L1 using one thread
* compact1 - compact L1 into L2 using one thread
* flush - flush memtable
* waitforcompaction - wait for compaction to finish
These are useful for reproducible benchmarks to help get the LSM tree shape
into a deterministic state. I wrote about this at:
http://smalldatum.blogspot.com/2021/02/read-only-benchmarks-with-lsm-are.html
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8027
Reviewed By: riversand963
Differential Revision: D27053861
Pulled By: ajkr
fbshipit-source-id: 1646f35584a3db03740fbeb47d91c3f00fb35d6e
Summary:
This is for cases that do not meet the Facebook criteria for
SKIP (see new comments). Also made ROCKSDB_GTEST_{SKIP,BYPASS} print the
message because gtest doesn't ever seem to.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8048
Test Plan: manual inspection of ./ribbon_test output, CI
Reviewed By: mrambacher
Differential Revision: D26953688
Pulled By: pdillinger
fbshipit-source-id: c914eaffe7d419db6ab90a193d474531e23582e5
Summary:
This API can be used for things like determining how much space
can be freed up by deleting a particular backup, etc.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8042
Test Plan:
validation of the API added to many existing backup unit
tests
Reviewed By: mrambacher
Differential Revision: D26936577
Pulled By: pdillinger
fbshipit-source-id: f0bbd90f0917b9781a6837652fb4616d9247816a
Summary:
New comment for share_files_with_checksum:
// Only used if share_table_files is set to true. Setting to false is
// DEPRECATED and potentially dangerous because in that case BackupEngine
// can lose data if backing up databases with distinct or divergent
// history, for example if restoring from a backup other than the latest,
// writing to the DB, and creating another backup. Setting to true (default)
// prevents these issues by ensuring that different table files (SSTs) with
// the same number are treated as distinct. See
// share_files_with_checksum_naming and ShareFilesNaming.
I have also removed interim option kFlagMatchInterimNaming, which is no
longer needed and was never needed for correct+compatible operation
(just performance).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8020
Test Plan:
tests updated. Backward+forward compatibility verified with
SHORT_TEST=1 check_format_compatible.sh. ldb uses default backup
options, and I manually verified shared_checksum in
/tmp/rocksdb_format_compatible_peterd/bak/current/ after run.
Reviewed By: ajkr
Differential Revision: D26786331
Pulled By: pdillinger
fbshipit-source-id: 36f968dfef1f5cacbd65154abe1d846151a55130
Summary:
Haven't seen any production issues with new Bloom filter and
it's now > 1 year old (added in 6.6.0).
Updated check_format_compatible.sh and HISTORY.md
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8017
Test Plan: tests updated (or prior bugs fixed)
Reviewed By: ajkr
Differential Revision: D26762197
Pulled By: pdillinger
fbshipit-source-id: 0e755c46b443087c1544da0fd545beb9c403d1c2
Summary:
I recently discovered the confusing, undocumented semantics of
Read() functions in the FileSystem and Env APIs. I have added
clarification to the best of my reverse-engineered understanding, and
made a note in HISTORY.md for implementors to check their
implementations, as a subtly non-adherent implementation could lead to
RocksDB quietly ignoring some portion of a file.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8029
Test Plan: no code changes
Reviewed By: anand1976
Differential Revision: D26831698
Pulled By: pdillinger
fbshipit-source-id: 208f97ff6037bc13bb2ef360b987c2640c79bd03
Summary:
The patch does the following:
1) Exposes the amount of data (number of bytes) read from blob files from
`BlobFileReader::GetBlob` / `Version::GetBlob`.
2) Tracks the total number and size of blobs read from blob files during a
compaction (due to garbage collection or compaction filter usage) in
`CompactionIterationStats` and propagates this data to
`InternalStats::CompactionStats` / `CompactionJobStats`.
3) Updates the formulae for write amplification calculations to include the
amount of data read from blob files.
4) Extends the compaction stats dump with a new column `Rblob(GB)` and
a new line containing the total number and size of blob files in the current
`Version` to complement the information about the shape and size of the LSM tree
that's already there.
5) Updates `CompactionJobStats` so that the number of files and amount of data
written by a compaction are broken down per file type (i.e. table/blob file).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8022
Test Plan: Ran `make check` and `db_bench`.
Reviewed By: riversand963
Differential Revision: D26801199
Pulled By: ltamasi
fbshipit-source-id: 28a5f072048a702643b28cb5971b4099acabbfb2
Summary:
This PR adds SetBufferSize() to the WriteBufferManager object. This enables user code to adjust the global budget for write_buffers based upon other memory conditions such as growth in table reader memory as the dataset grows.
The buffer_size_ member variable is now atomic to match design of other changeable size_t members within WriteBufferManager.
This change is useful as is. However, this change is also essential if someone decides they wanted to enable db_write_buffer_size modifications through the DB::SetOptions() API, i.e. no waste taking this as is.
Any format / spacing changes are due to clang-format as required by check-in automation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7961
Reviewed By: ajkr
Differential Revision: D26639075
Pulled By: akankshamahajan15
fbshipit-source-id: 0604348caf092d35f44e85715331dc920e5c1033
Summary:
The patch breaks down the "bytes written" (as well as the "number of output files")
compaction statistics into two, so the values are logged separately for table files
and blob files in the info log, and are shown in separate columns (`Write(GB)` for table
files, `Wblob(GB)` for blob files) when the compaction statistics are dumped.
This will also come in handy for fixing the write amplification statistics, which currently
do not consider the amount of data read from blob files during compaction. (This will
be fixed by an upcoming patch.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8013
Test Plan: Ran `make check` and `db_bench`.
Reviewed By: riversand963
Differential Revision: D26742156
Pulled By: ltamasi
fbshipit-source-id: 31d18ee8f90438b438ca7ed1ea8cbd92114442d5
Summary:
The checkpointing logic supports passing file level checksums
to the copy_file_cb callback function which is used by the backup code
for detecting corruption during file copies.
However, this is currently implemented only for table files.
This PR extends the checksum retrieval to blob files as well.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8003
Test Plan: Add new test units
Reviewed By: ltamasi
Differential Revision: D26680701
Pulled By: akankshamahajan15
fbshipit-source-id: 1bd1e2464df6e9aa31091d35b8c72786d94cd1c5
Summary:
Allow applications to implement a custom compaction filter and pass it to BlobDB.
The compaction filter's custom logic can operate on blobs.
To do so, application needs to subclass `CompactionFilter` abstract class and implement `FilterV2()` method.
Optionally, a method called `ShouldFilterBlobByKey()` can be implemented if application's custom logic rely solely
on the key to make a decision without reading the blob, thus saving extra IO. Examples can be found in
db/blob/db_blob_compaction_test.cc.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7974
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D26509280
Pulled By: riversand963
fbshipit-source-id: 59f9ae5614c4359de32f4f2b16684193cc537b39
Summary:
In the adapter class `WritableFileStringStreamAdapter`, which wraps WritableFile to be used for std::ostream, previouly only `std::endl` is considered a special case because `endl` is written by `os.put()` directly without going through `xsputn()`. `os.put()` will call `sputc()` and if we further check the internal implementation of `sputc()`, we will see it is
```
int_type __CLR_OR_THIS_CALL sputc(_Elem _Ch) { // put a character
return 0 < _Pnavail() ? _Traits::to_int_type(*_Pninc() = _Ch) : overflow(_Traits::to_int_type(_Ch));
```
As we explicitly disabled buffering, _Pnavail() is always 0. Thus every write, not captured by xsputn, becomes an overflow.
When I run tests on Windows, I found not only `std::endl` will drop into this case, writing an unsigned long long will also call `os.put()` then followed by `sputc()` and eventually call `overflow()`. Therefore, instead of only checking `std::endl`, we should try to append other characters as well unless the appending operation fails.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7991
Reviewed By: jay-zhuang
Differential Revision: D26615692
Pulled By: ajkr
fbshipit-source-id: 4c0003de1645b9531545b23df69b000e07014468
Summary:
RocksDB does auto-readahead for iterators on noticing more
than two reads for a table file. The readahead starts at 8KB and doubles on every
additional read upto BlockBasedTable::kMaxAutoReadAheadSize which is
256*1024.
This PR adds a new option BlockBasedTableOptions::max_auto_readahead_size which
replaces BlockBasedTable::kMaxAutoReadAheadSize and the new option can be
configured.
If max_auto_readahead_size is set 0 then no implicit auto prefetching will
be done. If max_auto_readahead_size provided is less than
8KB (which is initial readahead size used by rocksdb in case of
auto-readahead), readahead size will remain same as max_auto_readahead_size.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7951
Test Plan: Add new unit test case.
Reviewed By: anand1976
Differential Revision: D26568085
Pulled By: akankshamahajan15
fbshipit-source-id: b6543520fc74e97d859f2002328d4c5254d417af
Summary:
For dictionary compression, we need to collect some representative samples of the data to be compressed, which we use to either generate or train (when `CompressionOptions::zstd_max_train_bytes > 0`) a dictionary. Previously, the strategy was to buffer all the data blocks during flush, and up to the target file size during compaction. That strategy allowed us to randomly pick samples from as wide a range as possible that'd be guaranteed to land in a single output file.
However, some users try to make huge files in memory-constrained environments, where this strategy can cause OOM. This PR introduces an option, `CompressionOptions::max_dict_buffer_bytes`, that limits how much data blocks are buffered before we switch to unbuffered mode (which means creating the per-SST dictionary, writing out the buffered data, and compressing/writing new blocks as soon as they are built). It is not strict as we currently buffer more than just data blocks -- also keys are buffered. But it does make a step towards giving users predictable memory usage.
Related changes include:
- Changed sampling for dictionary compression to select unique data blocks when there is limited availability of data blocks
- Made use of `BlockBuilder::SwapAndReset()` to save an allocation+memcpy when buffering data blocks for building a dictionary
- Changed `ParseBoolean()` to accept an input containing characters after the boolean. This is necessary since, with this PR, a value for `CompressionOptions::enabled` is no longer necessarily the final component in the `CompressionOptions` string.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7970
Test Plan:
- updated `CompressionOptions` unit tests to verify limit is respected (to the extent expected in the current implementation) in various scenarios of flush/compaction to bottommost/non-bottommost level
- looked at jemalloc heap profiles right before and after switching to unbuffered mode during flush/compaction. Verified memory usage in buffering is proportional to the limit set.
Reviewed By: pdillinger
Differential Revision: D26467994
Pulled By: ajkr
fbshipit-source-id: 3da4ef9fba59974e4ef40e40c01611002c861465
Summary:
Added a "only_mutable_options" flag to the ConfigOptions. When set, the Configurable methods will only look at/update options that are marked as kMutable.
Fixed DB::SetOptions to allow for the update of any mutable TableFactory options. Fixes https://github.com/facebook/rocksdb/issues/7385.
Added tests for the new flag. Updated HISTORY.md
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7936
Reviewed By: akankshamahajan15
Differential Revision: D26389646
Pulled By: mrambacher
fbshipit-source-id: 6dc247f6e999fa2814059ebbd0af8face109fea0
Summary:
The trace file record and payload encode is fixed, which requires complex backward compatibility resolving. This PR introduce a new trace file format, which makes it easier to add new entries to the payload and does not have backward compatible issues. V 0.1 is still supported in this PR. Added the tracing for lower_bound and upper_bound for iterator.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7977
Test Plan: make check. tested with old trace file in replay and analyzing.
Reviewed By: anand1976
Differential Revision: D26529948
Pulled By: zhichao-cao
fbshipit-source-id: ebb75a127ce3c07c25a1ccc194c551f917896a76
Summary:
TransactionDB uses read callback to filter out un-committed data before
a snapshot. But `MultiGet()` API doesn't use that at all, which causes
returning unwanted data.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7963
Test Plan: Added unittest to reproduce
Reviewed By: anand1976
Differential Revision: D26455851
Pulled By: jay-zhuang
fbshipit-source-id: 265276698cf9d8c4cd79e3250ef10d14375bac55
Summary:
in PR https://github.com/facebook/rocksdb/issues/7419 , we introduce the new Append and PositionedAppend APIs to WritableFile at File System, which enable RocksDB to pass the data verification information (e.g., checksum of the data) to the lower layer. In this PR, we use the new API in WritableFileWriter, such that the file created via WritableFileWrite can pass the checksum to the storage layer. To control which types file should apply the checksum handoff, we add checksum_handoff_file_types to DBOptions. User can use this option to control which file types (Currently supported file tyes: kLogFile, kTableFile, kDescriptorFile.) should use the new Append and PositionedAppend APIs to handoff the verification information.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7523
Test Plan: add new unit test, pass make check/ make asan_check
Reviewed By: pdillinger
Differential Revision: D24313271
Pulled By: zhichao-cao
fbshipit-source-id: aafd69091ae85c3318e3e17cbb96fe7338da11d0
Summary:
Adds support for prefetching data in Ribbon queries,
which especially optimizes batched Ribbon queries for MultiGet
(~222ns/key to ~97ns/key) but also single key queries on cold memory
(~333ns to ~226ns) because many queries span more than one cache line.
This required some refactoring of the query algorithm, and there
does not appear to be a noticeable regression in "hot memory" query
times (perhaps from 48ns to 50ns).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7889
Test Plan:
existing unit tests, plus performance validation with
filter_bench:
Each data point is the best of two runs. I saturated the machine
CPUs with other filter_bench runs in the background.
Before:
$ ./filter_bench -impl=3 -m_keys_total_max=200 -average_keys_per_filter=100000 -m_queries=50
WARNING: Assertions are enabled; benchmarks unnecessarily slow
Building...
Build avg ns/key: 125.86
Number of filters: 1993
Total size (MB): 168.166
Reported total allocated memory (MB): 183.211
Reported internal fragmentation: 8.94626%
Bits/key stored: 7.05341
Prelim FP rate %: 0.951827
----------------------------
Mixed inside/outside queries...
Single filter net ns/op: 48.0111
Batched, prepared net ns/op: 222.384
Batched, unprepared net ns/op: 343.908
Skewed 50% in 1% net ns/op: 252.916
Skewed 80% in 20% net ns/op: 320.579
Random filter net ns/op: 332.957
After:
$ ./filter_bench -impl=3 -m_keys_total_max=200 -average_keys_per_filter=100000 -m_queries=50
WARNING: Assertions are enabled; benchmarks unnecessarily slow
Building...
Build avg ns/key: 128.117
Number of filters: 1993
Total size (MB): 168.166
Reported total allocated memory (MB): 183.211
Reported internal fragmentation: 8.94626%
Bits/key stored: 7.05341
Prelim FP rate %: 0.951827
----------------------------
Mixed inside/outside queries...
Single filter net ns/op: 49.8812
Batched, prepared net ns/op: 97.1514
Batched, unprepared net ns/op: 222.025
Skewed 50% in 1% net ns/op: 197.48
Skewed 80% in 20% net ns/op: 212.457
Random filter net ns/op: 226.464
Bloom comparison, for reference:
$ ./filter_bench -impl=2 -m_keys_total_max=200 -average_keys_per_filter=100000 -m_queries=50
WARNING: Assertions are enabled; benchmarks unnecessarily slow
Building...
Build avg ns/key: 35.3042
Number of filters: 1993
Total size (MB): 238.488
Reported total allocated memory (MB): 262.875
Reported internal fragmentation: 10.2255%
Bits/key stored: 10.0029
Prelim FP rate %: 0.965327
----------------------------
Mixed inside/outside queries...
Single filter net ns/op: 9.09931
Batched, prepared net ns/op: 34.21
Batched, unprepared net ns/op: 88.8564
Skewed 50% in 1% net ns/op: 139.75
Skewed 80% in 20% net ns/op: 181.264
Random filter net ns/op: 173.88
Reviewed By: jay-zhuang
Differential Revision: D26378710
Pulled By: pdillinger
fbshipit-source-id: 058428967c55ed763698284cd3b4bbe3351b6e69
Summary:
Added support for detecting plugins linked in the "plugin/" directory and building them from our Makefile in a standardized way. See "plugin/README.md" for details. An example of a plugin that can be built in this way can be found in https://github.com/ajkr/dedupfs.
There will be more to do in terms of making this process more convenient and adding support for CMake.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7918
Test Plan: my own plugin (https://github.com/ajkr/dedupfs) and also heard this patch worked with ZenFS.
Reviewed By: pdillinger
Differential Revision: D26189969
Pulled By: ajkr
fbshipit-source-id: 6624d4357d0ffbaedb42f0d12a3fcb737c78f758
Summary:
Explicitly reject all range deletions on `TransactionDB` or `OptimisticTransactionDB`, except when the user provides sufficient promises that allow us to proceed safely. The necessary promises are described in the API doc for `TransactionDB::DeleteRange()`. There is currently no way to provide enough promises to make it safe in `OptimisticTransactionDB`.
Fixes https://github.com/facebook/rocksdb/issues/7913.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7929
Test Plan: unit tests covering the cases it's permitted/rejected
Reviewed By: ltamasi
Differential Revision: D26240254
Pulled By: ajkr
fbshipit-source-id: 2834a0ce64cc3e4c3799e35b885a5e79c2f4f6d9
Summary:
Memtable bloom filter is useful in many use cases. A default value on with conservative 1.5% memory can benefit more use cases than use cases impacted.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6584
Test Plan: Run all existing tests.
Reviewed By: pdillinger
Differential Revision: D20626739
fbshipit-source-id: 1dd45532b932139552519b8c2682bd954550c2f9
Summary:
This PR adds the foundation classes for key-value integrity protection and the first use case: protecting live updates from the source buffers added to `WriteBatch` through the destination buffer in `MemTable`. The width of the protection info is not yet configurable -- only eight bytes per key is supported. This PR allows users to enable protection by constructing `WriteBatch` with `protection_bytes_per_key == 8`. It does not yet expose a way for users to get integrity protection via other write APIs (e.g., `Put()`, `Merge()`, `Delete()`, etc.).
The foundation classes (`ProtectionInfo.*`) embed the coverage info in their type, and provide `Protect.*()` and `Strip.*()` functions to navigate between types with different coverage. For making bytes per key configurable (for powers of two up to eight) in the future, these classes are templated on the unsigned integer type used to store the protection info. That integer contains the XOR'd result of hashes with independent seeds for all covered fields. For integer fields, the hash is computed on the raw unadjusted bytes, so the result is endian-dependent. The most significant bytes are truncated when the hash value (8 bytes) is wider than the protection integer.
When `WriteBatch` is constructed with `protection_bytes_per_key == 8`, we hold a `ProtectionInfoKVOTC` (i.e., one that covers key, value, optype aka `ValueType`, timestamp, and CF ID) for each entry added to the batch. The protection info is generated from the original buffers passed by the user, as well as the original metadata generated internally. When writing to memtable, each entry is transformed to a `ProtectionInfoKVOTS` (i.e., dropping coverage of CF ID and adding coverage of sequence number), since at that point we know the sequence number, and have already selected a memtable corresponding to a particular CF. This protection info is verified once the entry is encoded in the `MemTable` buffer.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7748
Test Plan:
- an integration test to verify a wide variety of single-byte changes to the encoded `MemTable` buffer are caught
- add to stress/crash test to verify it works in variety of configs/operations without intentional corruption
- [deferred] unit tests for `ProtectionInfo.*` classes for edge cases like KV swap, `SliceParts` and `Slice` APIs are interchangeable, etc.
Reviewed By: pdillinger
Differential Revision: D25754492
Pulled By: ajkr
fbshipit-source-id: e481bac6c03c2ab268be41359730f1ceb9964866
Summary:
Closes https://github.com/facebook/rocksdb/issues/7035
Changed how build_version.cc was generated:
- Included the GIT tag/branch in the build_version file
- Changed the "Build Date" to be:
- If the GIT branch is "clean" (no changes), the date of the last git commit
- If the branch is not clean, the current date
- Added APIs to access the "build information", rather than accessing the strings directly.
The build_version.cc file is now regenerated whenever the library objects are rebuilt.
Verified that the built files remain the same size across builds on a "clean build" and the same information is reported by sst_dump --version
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7866
Reviewed By: pdillinger
Differential Revision: D26086565
Pulled By: mrambacher
fbshipit-source-id: 6fcbe47f6033989d5cf26a0ccb6dfdd9dd239d7f
Summary:
When retryable IO error occurs during compaction, it is mapped to soft error and set the BG error. However, auto resume is not called to clean the soft error since compaction will reschedule by itself. In this change, When retryable IO error occurs during compaction, BG error is not set. User will be informed the error via EventHelper.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7899
Test Plan: tested with error_handler_fs_test
Reviewed By: anand1976
Differential Revision: D26094097
Pulled By: zhichao-cao
fbshipit-source-id: c53424f11d237405592cd762f43cbbdf8da8234f
Summary:
Introduces and uses a SystemClock class to RocksDB. This class contains the time-related functions of an Env and these functions can be redirected from the Env to the SystemClock.
Many of the places that used an Env (Timer, PerfStepTimer, RepeatableThread, RateLimiter, WriteController) for time-related functions have been changed to use SystemClock instead. There are likely more places that can be changed, but this is a start to show what can/should be done. Over time it would be nice to migrate most (if not all) of the uses of the time functions from the Env to the SystemClock.
There are several Env classes that implement these functions. Most of these have not been converted yet to SystemClock implementations; that will come in a subsequent PR. It would be good to unify many of the Mock Timer implementations, so that they behave similarly and be tested similarly (some override Sleep, some use a MockSleep, etc).
Additionally, this change will allow new methods to be introduced to the SystemClock (like https://github.com/facebook/rocksdb/issues/7101 WaitFor) in a consistent manner across a smaller number of classes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7858
Reviewed By: pdillinger
Differential Revision: D26006406
Pulled By: mrambacher
fbshipit-source-id: ed10a8abbdab7ff2e23d69d85bd25b3e7e899e90
Summary:
This provides a workaround for two race conditions that will be fixed in
a more sophisticated way later. This PR:
(1) Makes the client serialize calls to `Timer::Start()` and `Timer::Shutdown()` (see https://github.com/facebook/rocksdb/issues/7711). The long-term fix will be to make those functions thread-safe.
(2) Makes `PeriodicWorkScheduler` atomically add/cancel work together with starting/shutting down its `Timer`. The long-term fix will be for `Timer` API to offer more specialized APIs so the client will not need to synchronize.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7888
Test Plan: ran the repro provided in https://github.com/facebook/rocksdb/issues/7881
Reviewed By: jay-zhuang
Differential Revision: D25990891
Pulled By: ajkr
fbshipit-source-id: a97fdaebbda6d7db7ddb1b146738b68c16c5be38
Summary:
I find that the `track_and_verify_wals_in_manifest` option was only removed from 6.15 branch's HISTORY, but still appears under 6.15 in master branch's HISTORY. It should be moved to 6.16 since that's when the feature should be available.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7874
Reviewed By: jay-zhuang
Differential Revision: D25935971
Pulled By: cheng-chang
fbshipit-source-id: fe8bf1ec111597f9207e109aa3be65f8f919f1fd
Summary:
When the --try_load_options is used in conjunction with the
--column_family option, ldb incorrectly sets the ColumnFamilyOptions for
that column family to defaults. This PR fixes that by retaining from the
OPTIONS file and applying command line overrides.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7847
Test Plan: Add a unit test in ldb_cmd_test
Reviewed By: ajkr
Differential Revision: D25874720
Pulled By: anand1976
fbshipit-source-id: 04bcf23b55e5a30b5b6a59b0e5cb4faef3da7429
Summary:
The main improvement here is to not include `.` or `..` in the results of `Env::GetChildren`. The occurrence of `.` or `..`; it is non-portable, dependent on the Operating System and the File System. See: https://www.gnu.org/software/libc/manual/html_node/Reading_002fClosing-Directory.html
There were lots of duplicate checks spread through the RocksDB codebase previously to skip `.` and `..`. This new removes the need for those at the source.
Also some minor fixes to `Env::GetChildren`:
* Improve error handling in POSIX implementation
* Remove unnecessary array allocation on Windows
* Fix struct name for Windows Non-UTF-8 API
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7819
Reviewed By: ajkr
Differential Revision: D25837394
Pulled By: jay-zhuang
fbshipit-source-id: 1e137e7218d38b450af9c083f73d5357abcbba2e
Summary:
Add new API WriteBufferManager::dummy_entries_in_cache_usage() which reports the dummy entries size stored in cache to account for DataBlocks in WriteBufferManager.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7837
Test Plan: Updated test ./write_buffer_manager_test
Reviewed By: ajkr
Differential Revision: D25794312
Pulled By: akankshamahajan15
fbshipit-source-id: 197f5e8701e3dc57a7df72dab1735624f90daf4b
Summary:
In RocksDB, when IO error happens, the flags of IOStatus can be set. If the IOStatus is set as "File Scope IO Error", it indicate that the error is constrained in the file level. Since RocksDB does not continues write data to a file when any IO Error happens, File Scope IO Error can be treated the same as Retryable IO Error. Adding the logic to ErrorHandler::SetBGError to include the file scope IO Error in its error handling logic, which is the same as retryable IO Error.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7840
Test Plan: added new unit tests in error_handler_fs_test. make check
Reviewed By: anand1976
Differential Revision: D25820481
Pulled By: zhichao-cao
fbshipit-source-id: 69cabd3d010073e064d6142ce1cabf341b8a6806
Summary:
Previously we only had a debug assertion to check the right generator was being used for verification. However a user hit a problem in production where their factory was creating the wrong generator for some files, leading to checksum mismatches. It would have been easier to debug if we verified in optimized builds that the generator with the proper name is used. This PR adds such verification.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7824
Reviewed By: zhichao-cao
Differential Revision: D25740254
Pulled By: ajkr
fbshipit-source-id: a6231521747605021bad3231484b5d4f99f4044f
Summary:
So that we can more easily get aggregate live table data such
as total filter, index, and data sizes.
Also adds ldb support for getting properties
Also fixed some missing/inaccurate related comments in db.h
For example:
$ ./ldb --db=testdb get_property rocksdb.aggregated-table-properties
rocksdb.aggregated-table-properties.data_size: 102871
rocksdb.aggregated-table-properties.filter_size: 0
rocksdb.aggregated-table-properties.index_partitions: 0
rocksdb.aggregated-table-properties.index_size: 2232
rocksdb.aggregated-table-properties.num_data_blocks: 100
rocksdb.aggregated-table-properties.num_deletions: 0
rocksdb.aggregated-table-properties.num_entries: 15000
rocksdb.aggregated-table-properties.num_merge_operands: 0
rocksdb.aggregated-table-properties.num_range_deletions: 0
rocksdb.aggregated-table-properties.raw_key_size: 288890
rocksdb.aggregated-table-properties.raw_value_size: 198890
rocksdb.aggregated-table-properties.top_level_index_size: 0
$ ./ldb --db=testdb get_property rocksdb.aggregated-table-properties-at-level1
rocksdb.aggregated-table-properties-at-level1.data_size: 80909
rocksdb.aggregated-table-properties-at-level1.filter_size: 0
rocksdb.aggregated-table-properties-at-level1.index_partitions: 0
rocksdb.aggregated-table-properties-at-level1.index_size: 1787
rocksdb.aggregated-table-properties-at-level1.num_data_blocks: 81
rocksdb.aggregated-table-properties-at-level1.num_deletions: 0
rocksdb.aggregated-table-properties-at-level1.num_entries: 12466
rocksdb.aggregated-table-properties-at-level1.num_merge_operands: 0
rocksdb.aggregated-table-properties-at-level1.num_range_deletions: 0
rocksdb.aggregated-table-properties-at-level1.raw_key_size: 238210
rocksdb.aggregated-table-properties-at-level1.raw_value_size: 163414
rocksdb.aggregated-table-properties-at-level1.top_level_index_size: 0
$
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7779
Test Plan: Added a test to ldb_test.py
Reviewed By: jay-zhuang
Differential Revision: D25653103
Pulled By: pdillinger
fbshipit-source-id: 2905469a08a64dd6b5510cbd7be2e64d3234d6d3
Summary:
Primarily this change refactors the optimize_filters_for_memory
code for Bloom filters, based on malloc_usable_size, to also work for
Ribbon filters.
This change also replaces the somewhat slow but general
BuiltinFilterBitsBuilder::ApproximateNumEntries with
implementation-specific versions for Ribbon (new) and Legacy Bloom
(based on a recently deleted version). The reason is to emphasize
speed in ApproximateNumEntries rather than 100% accuracy.
Justification: ApproximateNumEntries (formerly CalculateNumEntry) is
only used by RocksDB for range-partitioned filters, called each time we
start to construct one. (In theory, it should be possible to reuse the
estimate, but the abstractions provided by FilterPolicy don't really
make that workable.) But this is only used as a heuristic estimate for
hitting a desired partitioned filter size because of alignment to data
blocks, which have various numbers of unique keys or prefixes. The two
factors lead us to prioritize reasonable speed over 100% accuracy.
optimize_filters_for_memory adds extra complication, because precisely
calculating num_entries for some allowed number of bytes depends on state
with optimize_filters_for_memory enabled. And the allocator-agnostic
implementation of optimize_filters_for_memory, using malloc_usable_size,
means we would have to actually allocate memory, many times, just to
precisely determine how many entries (keys) could be added and stay below
some size budget, for the current state. (In a draft, I got this
working, and then realized the balance of speed vs. accuracy was all
wrong.)
So related to that, I have made CalculateSpace, an internal-only API
only used for testing, non-authoritative also if
optimize_filters_for_memory is enabled. This simplifies some code.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7774
Test Plan:
unit test updated, and for FilterSize test, range of tested
values is greatly expanded (still super fast)
Also tested `db_bench -benchmarks=fillrandom,stats -bloom_bits=10 -num=1000000 -partition_index_and_filters -format_version=5 [-optimize_filters_for_memory] [-use_ribbon_filter]` with temporary debug output of generated filter sizes.
Bloom+optimize_filters_for_memory:
1 Filter size: 197 (224 in memory)
134 Filter size: 3525 (3584 in memory)
107 Filter size: 4037 (4096 in memory)
Total on disk: 904,506
Total in memory: 918,752
Ribbon+optimize_filters_for_memory:
1 Filter size: 3061 (3072 in memory)
110 Filter size: 3573 (3584 in memory)
58 Filter size: 4085 (4096 in memory)
Total on disk: 633,021 (-30.0%)
Total in memory: 634,880 (-30.9%)
Bloom (no offm):
1 Filter size: 261 (320 in memory)
1 Filter size: 3333 (3584 in memory)
240 Filter size: 3717 (4096 in memory)
Total on disk: 895,674 (-1% on disk vs. +offm; known tolerable overhead of offm)
Total in memory: 986,944 (+7.4% vs. +offm)
Ribbon (no offm):
1 Filter size: 2949 (3072 in memory)
1 Filter size: 3381 (3584 in memory)
167 Filter size: 3701 (4096 in memory)
Total on disk: 624,397 (-30.3% vs. Bloom)
Total in memory: 690,688 (-30.0% vs. Bloom)
Note that optimize_filters_for_memory is even more effective for Ribbon filter than for cache-local Bloom, because it can close the unused memory gap even tighter than Bloom filter, because of 16 byte increments for Ribbon vs. 64 byte increments for Bloom.
Reviewed By: jay-zhuang
Differential Revision: D25592970
Pulled By: pdillinger
fbshipit-source-id: 606fdaa025bb790d7e9c21601e8ea86e10541912
Summary:
When ConcurrentTaskLimiter is enabled and there are too many outstanding compactions, BackgroundCompaction returns Status::Busy(), which shouldn't be treat as compaction failure.
This caused performance issue when outstanding compactions reached the limit.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7739
Reviewed By: cheng-chang
Differential Revision: D25508319
Pulled By: ltamasi
fbshipit-source-id: 3b181b16ada0ca3393cfa3a7412985764e79c719
Summary:
Deprecate CalculateNumEntry and replace with
ApproximateNumEntries (better name) using size_t instead of int and
uint32_t, to minimize confusing casts and bad overflow behavior
(possible though probably not realistic). Bloom sizes are now explicitly
capped at max size supported by implementations: just under 4GiB for
fv=5 Bloom, and just under 512MiB for fv<5 Legacy Bloom. This
hardening could help to set up for fuzzing.
Also, since RocksDB only uses this information as an approximation
for trying to hit certain sizes for partitioned filters, it's more important
that the function be reasonably fast than for it to be completely
accurate. It's hard enough to be 100% accurate for Ribbon (currently
reversing CalculateSpace) that adding optimize_filters_for_memory
into the mix is just not worth trying to be 100% accurate for num
entries for bytes.
Also:
- Cleaned up filter_policy.h to remove MSVC warning handling and
potentially unsafe use of exception for "not implemented"
- Correct the number of entries limit beyond which current Ribbon
implementation falls back on Bloom instead.
- Consistently use "num_entries" rather than "num_entry"
- Remove LegacyBloomBitsBuilder::CalculateNumEntry as it's essentially
obsolete from general implementation
BuiltinFilterBitsBuilder::CalculateNumEntries.
- Fix filter_bench to skip some tests that don't make sense when only
one or a small number of filters has been generated.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7726
Test Plan:
expanded existing unit tests for CalculateSpace /
ApproximateNumEntries. Also manually used filter_bench to verify Legacy and
fv=5 Bloom size caps work (much too expensive for unit test). Note that
the actual bits per key is below requested due to space cap.
$ ./filter_bench -impl=0 -bits_per_key=20 -average_keys_per_filter=256000000 -vary_key_count_ratio=0 -m_keys_total_max=256 -allow_bad_fp_rate
...
Total size (MB): 511.992
Bits/key stored: 16.777
...
$ ./filter_bench -impl=2 -bits_per_key=20 -average_keys_per_filter=2000000000 -vary_key_count_ratio=0 -m_keys_total_max=2000
...
Total size (MB): 4096
Bits/key stored: 17.1799
...
$
Reviewed By: jay-zhuang
Differential Revision: D25239800
Pulled By: pdillinger
fbshipit-source-id: f94e6d065efd31e05ec630ae1a82e6400d8390c4
Summary:
Ensure that when direct IO is enabled and a compressed block cache is
configured, MultiGet inserts compressed data blocks into the compressed
block cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7756
Test Plan: Add unit test to db_basic_test
Reviewed By: cheng-chang
Differential Revision: D25416240
Pulled By: anand1976
fbshipit-source-id: 75d57526370c9c0a45ff72651f3278dbd8a9086f
Summary:
When 2 phase commit is enabled, if there are prepared data in a WAL, the WAL should be kept, the minimum log number for such a WAL is written to MANIFEST during flush. In atomic flush, such information is not written to MANIFEST.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7570
Test Plan: Added a new unit test `DBAtomicFlushTest.ManualFlushUnder2PC`, this test fails in atomic flush without this PR, after this PR, it succeeds.
Reviewed By: riversand963
Differential Revision: D24394222
Pulled By: cheng-chang
fbshipit-source-id: 60ce74b21b704804943be40c8de01b41269cf116
Summary:
Add timestamp to the `CompactRange()` and `GetApproximateSizes` range keys if needed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7684
Test Plan: make check
Reviewed By: riversand963
Differential Revision: D25015421
Pulled By: jay-zhuang
fbshipit-source-id: 51ca0756087eb053a3b11801e5c7ce1c6e2d38a9
Summary:
WAL may be truncated to an incomplete record due to crash while writing
the last record or corruption. In the former case, no hole will be
produced since no ACK'd data was lost. In the latter case, a hole could
be produced without this PR since we proceeded to recover the next WAL
as if nothing happened. This PR changes the record reading code to
always report a corruption for incomplete records in
`kPointInTimeRecovery` mode, and the upper layer will only ignore them
if the next WAL has consecutive seqnum (i.e., we are guaranteed no
hole).
While this solves the hole problem for the case of incomplete
records, the possibility is still there if the WAL is corrupted by
truncation to an exact record boundary. This PR also regresses how much data
can be recovered when writes are mixed with/without
`WriteOptions::disableWAL`, as then we can not distinguish between a
seqnum gap caused by corruption and a seqnum gap caused by a `disableWAL` write.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7701
Test Plan:
Interestingly there already was a test for this case
(`DBWALTestWithParams.kPointInTimeRecovery`); it just had a typo bug in
the verification that prevented it from noticing holes in recovery.
Reviewed By: anand1976
Differential Revision: D25111765
Pulled By: ajkr
fbshipit-source-id: 5e330b13b1ee2b5be096cea9d0ff6075843e57b6
Summary:
Instead of using `EncodeFixed32` which always serialize a integer to
little endian, we should use the local machine's endianness when
populating a native data structure during options parsing.
Without this fix, `read_amp_bytes_per_bit` may be populated incorrectly
on big-endian machines.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7680
Test Plan: make check
Reviewed By: pdillinger
Differential Revision: D24999166
Pulled By: riversand963
fbshipit-source-id: dc603cff6e17f8fa32479ce6df93b93082e6b0c4
Summary:
An application may accidentally write merge operands without properly configuring `merge_operator`. We should alert them as early as possible that there's an API misuse. Previously RocksDB only notified them when a query or background operation needed to merge but couldn't. With this PR, RocksDB notifies them of the problem before applying the merge operand to the memtable (although it may already be in WAL, which seems it'd cause a crash loop until they enable `merge_operator`).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7667
Reviewed By: riversand963
Differential Revision: D24933360
Pulled By: ajkr
fbshipit-source-id: 3a4a2ceb0b7aed184113dd03b8efd735a8332f7f
Summary:
Added experimental public API for Ribbon filter:
NewExperimentalRibbonFilterPolicy(). This experimental API will
take a "Bloom equivalent" bits per key, and configure the Ribbon
filter for the same FP rate as Bloom would have but ~30% space
savings. (Note: optimize_filters_for_memory is not yet implemented
for Ribbon filter. That can be added with no effect on schema.)
Internally, the Ribbon filter is configured using a "one_in_fp_rate"
value, which is 1 over desired FP rate. For example, use 100 for 1%
FP rate. I'm expecting this will be used in the future for configuring
Bloom-like filters, as I expect people to more commonly hold constant
the filter accuracy and change the space vs. time trade-off, rather than
hold constant the space (per key) and change the accuracy vs. time
trade-off, though we might make that available.
### Benchmarking
```
$ ./filter_bench -impl=2 -quick -m_keys_total_max=200 -average_keys_per_filter=100000 -net_includes_hashing
Building...
Build avg ns/key: 34.1341
Number of filters: 1993
Total size (MB): 238.488
Reported total allocated memory (MB): 262.875
Reported internal fragmentation: 10.2255%
Bits/key stored: 10.0029
----------------------------
Mixed inside/outside queries...
Single filter net ns/op: 18.7508
Random filter net ns/op: 258.246
Average FP rate %: 0.968672
----------------------------
Done. (For more info, run with -legend or -help.)
$ ./filter_bench -impl=3 -quick -m_keys_total_max=200 -average_keys_per_filter=100000 -net_includes_hashing
Building...
Build avg ns/key: 130.851
Number of filters: 1993
Total size (MB): 168.166
Reported total allocated memory (MB): 183.211
Reported internal fragmentation: 8.94626%
Bits/key stored: 7.05341
----------------------------
Mixed inside/outside queries...
Single filter net ns/op: 58.4523
Random filter net ns/op: 363.717
Average FP rate %: 0.952978
----------------------------
Done. (For more info, run with -legend or -help.)
```
168.166 / 238.488 = 0.705 -> 29.5% space reduction
130.851 / 34.1341 = 3.83x construction time for this Ribbon filter vs. lastest Bloom filter (could make that as little as about 2.5x for less space reduction)
### Working around a hashing "flaw"
bloom_test discovered a flaw in the simple hashing applied in
StandardHasher when num_starts == 1 (num_slots == 128), showing an
excessively high FP rate. The problem is that when many entries, on the
order of number of hash bits or kCoeffBits, are associated with the same
start location, the correlation between the CoeffRow and ResultRow (for
efficiency) can lead to a solution that is "universal," or nearly so, for
entries mapping to that start location. (Normally, variance in start
location breaks the effective association between CoeffRow and
ResultRow; the same value for CoeffRow is effectively different if start
locations are different.) Without kUseSmash and with num_starts > 1 (thus
num_starts ~= num_slots), this flaw should be completely irrelevant. Even
with 10M slots, the chances of a single slot having just 16 (or more)
entries map to it--not enough to cause an FP problem, which would be local
to that slot if it happened--is 1 in millions. This spreadsheet formula
shows that: =1/(10000000*(1 - POISSON(15, 1, TRUE)))
As kUseSmash==false (the setting for Standard128RibbonBitsBuilder) is
intended for CPU efficiency of filters with many more entries/slots than
kCoeffBits, a very reasonable work-around is to disallow num_starts==1
when !kUseSmash, by making the minimum non-zero number of slots
2*kCoeffBits. This is the work-around I've applied. This also means that
the new Ribbon filter schema (Standard128RibbonBitsBuilder) is not
space-efficient for less than a few hundred entries. Because of this, I
have made it fall back on constructing a Bloom filter, under existing
schema, when that is more space efficient for small filters. (We can
change this in the future if we want.)
TODO: better unit tests for this case in ribbon_test, and probably
update StandardHasher for kUseSmash case so that it can scale nicely to
small filters.
### Other related changes
* Add Ribbon filter to stress/crash test
* Add Ribbon filter to filter_bench as -impl=3
* Add option string support, as in "filter_policy=experimental_ribbon:5.678;"
where 5.678 is the Bloom equivalent bits per key.
* Rename internal mode BloomFilterPolicy::kAuto to kAutoBloom
* Add a general BuiltinFilterBitsBuilder::CalculateNumEntry based on
binary searching CalculateSpace (inefficient), so that subclasses
(especially experimental ones) don't have to provide an efficient
implementation inverting CalculateSpace.
* Minor refactor FastLocalBloomBitsBuilder for new base class
XXH3pFilterBitsBuilder shared with new Standard128RibbonBitsBuilder,
which allows the latter to fall back on Bloom construction in some
extreme cases.
* Mostly updated bloom_test for Ribbon filter, though a test like
FullBloomTest::Schema is a next TODO to ensure schema stability
(in case this becomes production-ready schema as it is).
* Add some APIs to ribbon_impl.h for configuring Ribbon filters.
Although these are reasonably covered by bloom_test, TODO more unit
tests in ribbon_test
* Added a "tool" FindOccupancyForSuccessRate to ribbon_test to get data
for constructing the linear approximations in GetNumSlotsFor95PctSuccess.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7658
Test Plan:
Some unit tests updated but other testing is left TODO. This
is considered experimental but laying down schema compatibility as early
as possible in case it proves production-quality. Also tested in
stress/crash test.
Reviewed By: jay-zhuang
Differential Revision: D24899349
Pulled By: pdillinger
fbshipit-source-id: 9715f3e6371c959d923aea8077c9423c7a9f82b8
Summary:
Previously, even when `bottommost_compression_opts`'s `enabled` flag was set, it only took effect when
`bottommost_compression` was also set to something other than `kDisableCompressionOption`.
This wasn't documented and, if we kept the old behavior, it'd make
things complicated like the migration instructions in https://github.com/facebook/rocksdb/issues/7619. We can
simplify the API by making `bottommost_compression_opts` always take
effect when its `enabled` flag is set.
Fixes https://github.com/facebook/rocksdb/issues/7631.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7633
Reviewed By: ltamasi
Differential Revision: D24710358
Pulled By: ajkr
fbshipit-source-id: bbbdf9c1b53c63a4239d902cc3f5a11da1874647
Summary:
The Customizable class is an extension of the Configurable class and allows instances to be created by a name/ID. Classes that extend customizable can define their Type (e.g. "TableFactory", "Cache") and a method to instantiate them (TableFactory::CreateFromString). Customizable objects can be registered with the ObjectRegistry and created dynamically.
Future PRs will make more types of objects extend Customizable.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6590
Reviewed By: cheng-chang
Differential Revision: D24841553
Pulled By: zhichao-cao
fbshipit-source-id: d0c2132bd932e971cbfe2c908ca2e5db30c5e155
Summary:
In `BuildTable()`, we call `builder->Finish()` before evaluating `builder->NeedCompact()`.
However, we call `builder->NeedCompact()` before `builder->Finish()` in compaction job. This can be wrong because the table properties collectors may rely on the success of `Finish()` to provide correct result for `NeedCompact()`.
Test plan (on devserver):
make check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7627
Reviewed By: ajkr
Differential Revision: D24728741
Pulled By: riversand963
fbshipit-source-id: 5a0dce244e14eb1106c4f87021e6bebca82b486e
Summary:
Existing API `VerifyChecksum()` allows application to verify sst files' block checksums.
Since whole file, user-specified checksum is tracked in MANIFEST, we can expose a new
API to verify sst files' file checksums.
```
// Compute table file checksums if applicable and compare with MANIFEST.
// Returns OK if no file has mismatching whole-file checksum.
Status DB::VerifyFileChecksums(const ReadOptions& /*read_options*/);
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7578
Test Plan: make check
Reviewed By: pdillinger
Differential Revision: D24436783
Pulled By: riversand963
fbshipit-source-id: 52b51519b842f2b3c4e3351998a97c86cbec85b3
Summary:
The filter query key should not contain timestamp. The timestamp is
stripped for Get(), but not MultiGet().
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7589
Reviewed By: riversand963
Differential Revision: D24494661
Pulled By: jay-zhuang
fbshipit-source-id: fc5ff40f9d683a89a760c6ff0ab3aed05a70c317
Summary:
In dictionary compression's initial implementation, in order to save CPU overhead, we only enabled it
for bottom level under the assumption that the vast majority of data is
stored there. At that time, there was no
such thing as `ColumnFamilyOptions::bottommost_compression_opts`, so we just
hardcoded disabling dictionary compression in flush and compactions to
non-bottommost level. Now, we have users who generate all their files
through flush and are considering using dictionary compression.
To support such a use case, this PR expands the scope of `ColumnFamilyOptions::compression_opts` to
additionally include flushed files and files generated by compaction to
a non-bottommost level. Users can still get the old behavior by moving
their dictionary settings to `ColumnFamilyOptions::bottommost_compression_opts`
and explicitly enabling both that and `ColumnFamilyOptions::bottommost_compression`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7619
Reviewed By: ltamasi
Differential Revision: D24665610
Pulled By: ajkr
fbshipit-source-id: 656b90bce1033fe21c71e09af931ef5bde3e464c
Summary:
The recently reverted behavior changes were released to at least one
place internally, so we should mention the reverts in release notes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7617
Reviewed By: akankshamahajan15
Differential Revision: D24654343
Pulled By: ajkr
fbshipit-source-id: eb64b2797d8508cd95a2dc2698122c1be29ce817
Summary:
Currently, the following interleaving of events can lead to SuperVersion containing both immutable memtables as well as the resulting L0. This can cause Get to return incorrect result if there are merge operands. This may also affect other operations such as single deletes.
```
time main_thr bg_flush_thr bg_compact_thr compact_thr set_opts_thr
0 | WriteManifest:0
1 | issue compact
2 | wait
3 | Merge(counter)
4 | issue flush
5 | wait
6 | WriteManifest:1
7 | wake up
8 | write manifest
9 | wake up
10 | Get(counter)
11 | remove imm
V
```
The reason behind is that: one bg flush thread's installing new `Version` can be batched and performed by another thread that is the "leader" MANIFEST writer. This bg thread removes the memtables from current super version only after `LogAndApply` returns. After the leader MANIFEST writer signals (releasing mutex) this bg flush thread, it is possible that another thread sees this cf with both memtables (whose data have been flushed to the newest L0) and the L0 before this bg flush thread removes the memtables.
To address this issue, each bg flush thread can pass a callback function to `LogAndApply`. The callback is responsible for removing the memtables. Therefore, the leader MANIFEST writer can call this callback and remove the memtables before releasing the mutex.
Test plan (devserver)
```
$make merge_test
$./merge_test --gtest_filter=MergeTest.MergeWithCompactionAndFlush
$make check
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6069
Reviewed By: cheng-chang
Differential Revision: D18790894
Pulled By: riversand963
fbshipit-source-id: e41bd600c0448b4f4b2deb3f7677f95e3076b4ed
Summary:
Remove function calling in assert statement as assert is a no
op in opt build and that function might not be called. This causes hang
in closing RocksDB when refit level is set.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7581
Test Plan: make check -j64
Reviewed By: riversand963
Differential Revision: D24466420
Pulled By: akankshamahajan15
fbshipit-source-id: 97db4ec5a95ae693c3290e176a3c12a9b1ad2f6d
Summary:
This PR adds support for writing a location identifier of the DB host to SST files as a table property. By default, the hostname is used, but can be overridden by the user. There have been some recent corruptions in files written by ```SstFileWriter``` before checksumming, so this property can be used to trace it back to the writing host and checking the host for hardware isues.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7479
Test Plan: Add new unit tests
Reviewed By: pdillinger
Differential Revision: D24340671
Pulled By: anand1976
fbshipit-source-id: 2038949fd8d160c0633ccb4f9da77740f19fa2a2
Summary:
These notes existed on the release branches where they were backported, but were never added on master branch. Added them now and mentioned what minor release the fix originally appeared.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7545
Reviewed By: riversand963
Differential Revision: D24281759
Pulled By: ajkr
fbshipit-source-id: 7422e984b667793d6260dd32a7492afcb2ff1c4b
Summary:
The old flag-based APIs (`BlockBasedTableOptions::pin_l0_filter_and_index_blocks_in_cache` and `BlockBasedTableOptions::pin_top_level_index_and_filter`) were insufficient for our needs. For example, it was impossible to pin only unpartitioned meta-blocks, which could prevent block cache contention when turning on dictionary compression or during a migration to partitioned indexes/filters. It was also impossible to pin all meta-blocks in memory while having predictable memory usage via block cache. If we had continued adding flags to address these scenarios, they would have had significant overlap causing confusion. Instead, this PR deprecates the flags and starts a new API with non-overlapping options.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7520
Test Plan:
- new unit test
- added new options to stress/crash test and ran for a while: `$ python tools/db_crashtest.py blackbox --simple --max_key=1000000 -write_buffer_size=1048576 -target_file_size_base=1048576 -max_bytes_for_level_base=4194304 --interval=10 -value_size_mult=33 -column_families=1 -reopen=0`
Reviewed By: pdillinger
Differential Revision: D24200034
Pulled By: ajkr
fbshipit-source-id: 3fa7cfc71e7960f7a867511dd6ae5834dd73b13e
Summary:
Add following stats for MultiGet in Histogram to get more insight on MultiGet.
1. Number of index and filter blocks read from file as part of MultiGet
request per level.
2. Number of data blocks read from file per level.
3. Number of SST files loaded from file system per level.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7366
Reviewed By: anand1976
Differential Revision: D24127040
Pulled By: akankshamahajan15
fbshipit-source-id: e63a003056b833729b277edc0639c08fb432756b
Summary:
If `BottommostLevelCompaction.kForce*` is set, compaction should avoid
trivial move and always compact the sst to the target size.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7368
Reviewed By: ajkr
Differential Revision: D23629525
Pulled By: jay-zhuang
fbshipit-source-id: 79f23c79ecb31587e0593b28cce43131107bbcd0
Summary:
This exposes to the listener interface whether a compaction was
full or not. Also cleaned up API comment for CompactionJobInfo::stats,
which is not of a nullable type. And since CompactionJob is always
created with non-null CompactionJobStats, removed conditionals on it
being nullptr and instead assert non-null.
TODO later: update C and Java interfaces
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7451
Test Plan: updated existing unit tests to check new field, make check
Reviewed By: ltamasi
Differential Revision: D23977796
Pulled By: pdillinger
fbshipit-source-id: 1ae7e26cb949631c2b2fb9e696710daf53cc378d
Summary:
Introduce an new option options.check_flush_compaction_key_order, by default set to true, which checks key order of flush and compaction, and fail the operation if the order is violated.
Also did minor refactor hash checking code, which consolidates the hashing logic to a vlidation class, where the key ordering logic is added.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7467
Test Plan: Add unit tests to validate the check can catch reordering in flush and compaction, and can be properly disabled.
Reviewed By: riversand963
Differential Revision: D24010683
fbshipit-source-id: 8dd6292d2cda8006054e9ded7cfa4bf405f0527c
Summary:
This has been running in production on some key workloads, so
we believe it to be safe and extremely low cost. Nevertheless, I've
added code to ensure that "force_consistency_checks" is mentioned in
any corruption reports so that people know how to disable in case of
false positive corruption reports.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7446
Test Plan:
make check, CI, temporary debug print new message with
./version_builder_test
Reviewed By: ajkr
Differential Revision: D23972101
Pulled By: pdillinger
fbshipit-source-id: 9623e400f3752577c0ecf977e6d0915562cf9968
Summary:
Add a new Option "allow_data_in_errors". When it's set by users, it allows them to opt-in to get error messages containing corrupted keys/values. Corrupt keys, values will be logged in the messages, logs, status etc. that will help users with the useful information regarding affected data.
By default value is set false to prevent users data to be exposed in the messages.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7420
Test Plan:
1. make check -j64
2. Add a new test case
Reviewed By: ajkr
Differential Revision: D23835028
Pulled By: akankshamahajan15
fbshipit-source-id: 8d2eba8fb898e79fcf1fccc07295065a75eb59b1
Summary:
Two relatively simple functional changes to incremental backup
behavior, integrated with a minor refactoring to reduce code redundancy and
improve error/log message. There are nuances to the impact of these changes,
but I believe they are fundamentally good and generally safe. Those functional
changes:
* Incremental backups no longer read DB table files that are already saved to a
shared part of the backup directory, unless `share_files_with_checksum` is used
with `kLegacyCrc32cAndFileSize` naming (discouraged) where crc32c full file
checksums are needed to determine file naming.
* Justification: incremental backups should not need to read the whole DB,
especially without rate limiting. (Although other BackupEngine reads are not
rate limited either, other non-trivial reads are generally limited by a
corresponding write, as in copying files.) Also, the fact that this is not
already fixed was arguably a bug/oversight in the implementation of https://github.com/facebook/rocksdb/issues/7110.
* When considering whether a table file is already backed up in a shared part
of backup directory, BackupEngine would already query the sizes of source (DB)
and pre-existing destination (backup) files. BackupEngine now uses these file
sizes to detect corruption, as at least one of (a) old backup, (b) backup in
progress, or (c) current DB is corrupt if there's a size mismatch.
* Justification: a random related fix that also helps to cover a small hole
in corruption checking uncovered by the other functional change:
* For `share_table_files` without "checksum" (not recommended), the other
change regresses in detecting fundamentally unsafe use of this option
combination: when you might generate different versions of same SST file
number. As demonstrated by `BackupableDBTest.FailOverwritingBackups,` this
regression is greatly mitigated by the new file size checking. Nevertheless,
almost no reason to use `share_files_with_checksum=false` should remain, and
comments are updated appropriately.
Also, this change renames internal function `CalculateChecksum` to
`ReadFileAndComputeChecksum` to make the performance impact of this function
clear in code reviews.
It is not clear what 'same_path' is for in backupable_db.cc, and I suspect it
cannot be true for a DB with unique file names (like DBImpl). Nevertheless,
I've tried to keep its functionality intact when `true` to minimize risk for
now, despite having no unit tests for which it is true.
Select impact details (much more in unit tests): For
`share_files_with_checksum`, I am confident there is no regression (vs.
pre-6.12) in detecting DB or backup corruption at backup creation time, mostly
because the old design did not leverage this extra checksum computation for
detecting inconsistencies at backup creation time. (With computed checksums in
names, a recently corrupted file just looked like a different file vs. what was
already backed up.)
Even in the hypothetical case of DB session id collision (~100 bits entropy
collision), file size in name and/or our file size check add an extra layer of
protection against false success in creating an accurate new backup. (Unit test
included.)
`DB::VerifyChecksum` and `BackupEngine::VerifyBackup` with checksum checking
are still able to catch corruptions that `CreateNewBackup` does not. Note that
when custom file checksum support is added to BackupEngine, that will
essentially give the same power as `DB::VerifyChecksum` into `CreateNewBackup`.
We could add options for `CreateNewBackup` to cover some of what would be
caught by `VerifyBackup` with checksum checking.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7413
Test Plan:
Two new unit tests included, both of which fail without these
changes. Although we don't test the I/O improvement directly, we test it
indirectly in DB corruption detection power that was inadvertently unlocked
with new backup file naming PLUS computing current content checksums (now
removed). (I don't think that case of DB corruption detection justifies reading
the whole DB on incremental backup.)
Reviewed By: zhichao-cao
Differential Revision: D23818480
Pulled By: pdillinger
fbshipit-source-id: 148aff16f001af5b9fd4b22f155311c2461f1bac
Summary:
This change reverts BackupEngine to 6.12 state to accommodate a
higher-priority fix that does not easily merge with this custom checksum
support. We intend to reinstate this support soon, by merging a revert
of this change.
For backupable_db_test, I've removed the tests depending on this
feature.
I've also removed relevant HISTORY.md entry.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7411
Test Plan: unit tests
Reviewed By: ajkr
Differential Revision: D23793835
Pulled By: pdillinger
fbshipit-source-id: 7e861436539584799b13d1a8ae559b81b6d08052
Summary:
In the current implementation, any retryable IO error happens during Flush is mapped to a hard error. In this case, DB is stopped and write is stalled unless the background error is cleaned. In this PR, if WAL is DISABLED, the retryable IO error during FLush is mapped to a soft error. Such that, the memtable can continue receive the writes. At the same time, if auto resume is triggered, SwtichMemtable will not be called during Flush when resuming the DB to avoid to many small memtables. Testing cases are added.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7310
Test Plan: adding new unit test, pass make check.
Reviewed By: anand1976
Differential Revision: D23710892
Pulled By: zhichao-cao
fbshipit-source-id: bc4ca50d11c6b23b60d2c0cb171d86d542b038e9
Summary:
Prior to 6.12, backup files using share_files_with_checksum had
the file size encoded in the file name, after the last '\_' and before
the last '.'. We considered this an implementation detail subject to
change, and indeed removed this information from the file name (with an
option to use old behavior) because it was considered
ineffective/inefficient for file name uniqueness. However, some
downstream RocksDB users were relying on this information since the file
size is not explicitly in the backup manifest file.
This primary purpose of this change is "retrofitting" the 6.12 release
(not yet a public release) to simultaneously support the benefits of the
new naming scheme (I/O performance and data correctness at scale) and
preserve the file size information, both as default behaviors. With this
change, we are essentially making the file size information encoded in
the file name an official, though obscure, extension of the backup meta
file format.
We preserve an option (kLegacyCrc32cAndFileSize) to use the original
"legacy" naming scheme, with its caveats, and make it easy to omit the
file size information (no kFlagIncludeFileSize), for more compact file
names. But note that changing the naming scheme used on an existing db
and backup directory can lead to transient space amplification, as some
files will be stored under two names in the shared_checksum directory.
Because some backups were saved using the original 6.12 naming scheme,
we offer two ways of dealing with those files: SST files generated by
older 6.12 versions can either use the default naming scheme in effect
when the SST files were generated (kFlagMatchInterimNaming, default, no
transient space amplification) or can use a new naming scheme (no
kFlagMatchInterimNaming, potential space amplification because some
already stored files getting a new name).
We don't have a natural way to detect which files were generated by
previous 6.12 versions, but this change hacks one in by changing DB
session ids to now use a more concise encoding, reducing file name
length, saving ~dozen bytes from SST files, and making them visually
distinct from DB ids so that they are less likely to be mixed up.
Two final auxiliary notes:
Recognizing that the backup file names have become a de facto part of
the backup meta schema, this change makes them easier to parse and
extend by putting a distinct marker, 's', before DB session ids embedded
in the name. When we extend this to allow custom checksums in the name,
they can get their own marker to ensure safe parsing. For backward
compatibility, file size does not get a marker but is assumed for
`_[0-9]+[.]`
Another change from initial 6.12 default behavior is never including
file custom checksum in the file name. Looking ahead to 6.13, we do not
want the default behavior to cause backup space amplification for
someone turning on file custom checksum checking in BackupEngine; we
want that to be an easy decision. When implemented, including file
custom checksums in backup file names will be a non-default option.
Actual file name patterns and priorities, as regexes:
kLegacyCrc32cAndFileSize OR pre-6.12 SST file ->
[0-9]+_[0-9]+_[0-9]+[.]sst
kFlagMatchInterimNaming set (default) AND early 6.12 SST file ->
[0-9]+_[0-9a-fA-F-]+[.]sst
kUseDbSessionId AND NOT kFlagIncludeFileSize ->
[0-9]+_s[0-9A-Z]{20}[.]sst
kUseDbSessionId AND kFlagIncludeFileSize (default) ->
[0-9]+_s[0-9A-Z]{20}_[0-9]+[.]sst
We might add opt-in options for more '\_' separated data in the name,
but embedded file size, if present, will always be after last '\_' and
before '.sst'.
This change was originally applied to version 6.12. (See https://github.com/facebook/rocksdb/issues/7390)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7400
Test Plan:
unit tests included. Sync point callbacks are used to mimic
previous version SST files.
Reviewed By: ajkr
Differential Revision: D23759587
Pulled By: pdillinger
fbshipit-source-id: f62d8af4e0978de0a34f26288cfbe66049b70025
Summary:
Make "unreleased" section for HISTORY.md with things misplaced
into 6.12 and 6.13
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7401
Test Plan: see how it goes, and `git diff origin/6.13.fb HISTORY.md`
Reviewed By: jay-zhuang
Differential Revision: D23759740
Pulled By: pdillinger
fbshipit-source-id: fc441916c7ff2bbb8d5384137653b340d4c47674
Summary:
Cleaned up the public API to use the EncryptedEnv. This change will allow providers to be developed and added to the system easier in the future. It will also allow better integration in the future with the OPTIONS file.
- The internal classes were moved out of the public API into an internal "env_encryption_ctr.h" header. Short-cut constructors were added to provide the original API functionality.
- The APIs to the constructors were changed to take shared_ptr, rather than raw pointers or references to allow better memory management and alternative implementations.
- CreateFromString methods were added to allow future expansion to other provider and cipher implementations through a standard API.
Additionally, there was a code duplication in the NewXXXFile methods. This common code was moved under a templatized function.
A first-pass at structuring the code was made to potentially allow multiple EncryptionProviders in a single EncryptedEnv. The idea was that different providers may use different cipher keys or different versions/algorithms. The EncryptedEnv should have some means of picking different providers based on information. The groundwork was started for this (the use of the provider_ member variable was localized) but the work has not been completed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7279
Reviewed By: jay-zhuang
Differential Revision: D23709440
Pulled By: zhichao-cao
fbshipit-source-id: 0e845fff0e03a52603eb9672b4ade32d063ff2f2
Summary:
This PR merges the functionality of making the ColumnFamilyOptions, TableFactory, and DBOptions into Configurable into a single PR, resolving any merge conflicts
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5753
Reviewed By: ajkr
Differential Revision: D23385030
Pulled By: zhichao-cao
fbshipit-source-id: 8b977a7731556230b9b8c5a081b98e49ee4f160a
Summary:
During bottommost compaction, RocksDB cannot simply drop a tombstone if
this tombstone is not in the earliest snapshot. The current behavior is: RocksDB
skips other internal keys (of the same user key) in the same snapshot range. In
the meantime, RocksDB should check for the `shutting_down` flag. Otherwise, it
is possible for a bottommost compaction that has already started running to take
a long time to finish, even if the application has tried to cancel all background jobs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7356
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D23663241
Pulled By: riversand963
fbshipit-source-id: 25f8e9b51bc3bfa3353cdf87557800f9d90ee0b5
Summary:
https://github.com/facebook/rocksdb/issues/3341 guaranteed that upon return of `GetSortedWalFiles` after
`DisableFileDeletions`, all pending purges of previously obsolete WAL
files will have finished. However, the addition of
avoid_unnecessary_blocking_io in https://github.com/facebook/rocksdb/issues/5043 opened a hole in the code making
that assurance, which can lead to files to be copied for checkpoint or
backup going missing before being copied, with that option enabled.
This change patches the hole.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7369
Test Plan:
apparent fix to backups in crash test observed. Will work
on a unit test for another commit
Reviewed By: ajkr
Differential Revision: D23620258
Pulled By: pdillinger
fbshipit-source-id: bea36b461a5b719c3e3ef802f967bc3e8ae71614
Summary:
This is adapted from https://github.com/facebook/rocksdb/issues/6678 but takes a different approach, avoiding opening a read-write DB and avoiding the `DeleteFile()` API.
First, this PR refactors how options variables are initialized in `ldb` so it can be reused in a subcommand that doesn't open a DB:
- Separated remaining option initialization logic out of `OpenDB()`. The new `PrepareOptions()` function initializes the full options state.
- Fixed an old TODO about applying the subcommand CF option overrides to the proper `ColumnFamilyOptions` object.
Second, this PR adds the `ldb unsafe_remove_sst_file` subcommand. It uses the `VersionSet`-level APIs to remove the file with the specified number.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7335
Test Plan: played with interactive python and this file removal command. Verified openability/correct results in case of multiple column families, multiple levels, etc.
Reviewed By: pdillinger
Differential Revision: D23454575
Pulled By: ajkr
fbshipit-source-id: 039b7a8cbfc42fd123dcb25821eef51d61148afe
Summary:
Since we can't land https://github.com/facebook/rocksdb/issues/7336 until the next major release, added a strong warning against the `DeleteFile()` API in the meantime.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7337
Reviewed By: pdillinger
Differential Revision: D23459728
Pulled By: ajkr
fbshipit-source-id: 326cb9b18190386080c35c761a8736d8a877dafb
Summary:
In block-based table builder, the cut-over from buffered to unbuffered
mode involves sampling the buffered blocks and generating a dictionary.
There was a bug where `SstFileWriter` passed zero as the `target_file_size`
causing the cutover to happen immediately, so there were no samples
available for generating the dictionary.
This PR changes the meaning of `target_file_size == 0` to mean buffer
the whole file before cutting over. It also adds dictionary compression
support to `sst_dump --command=recompress` for easy evaluation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7323
Reviewed By: cheng-chang
Differential Revision: D23412158
Pulled By: ajkr
fbshipit-source-id: 3b232050e70ef3c2ee85a4b5f6fadb139c569873
Summary:
- Closes https://github.com/facebook/rocksdb/issues/6490
- Currently MERGEs are converted to PUTs at bottom or compaction has reached the beginning of the key, this can wrongly cover a PUT future base case.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7166
Test Plan:
- Automated: `make all check`
- Manual: With `allow_ingest_behind = true`, add Merge operations to a key then run compaction. Then run ingesting external files to make sure the base case is probably compacted with existing Merges.
Reviewed By: cheng-chang
Differential Revision: D23325425
Pulled By: ajkr
fbshipit-source-id: 3eb415eb7b381b5453e45245393566153b1abb68
Summary:
L0 score is based on size target and number of files. The size target
used is `max_bytes_for_level_base`. However, the base level's size can
dynamically expand in write burst mode. In fact, it can expand so much
that L0->Lbase becomes the highest fanout in target sizes. This doesn't
make sense from an efficiency perspective, so this PR bounds the
L0->Lbase fanout to the smoothed level multiplier. The L0 scoring based
on file count remains unchanged.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7325
Test Plan:
contrived benchmark that exhibits the problem:
```
$ TEST_TMPDIR=/data/users/andrewkr/ ./db_bench -benchmarks=filluniquerandom,readrandom -write_buffer_size=1048576 -target_file_size_base=1048576 -max_bytes_for_level_base=4194304 -level0_file_num_compaction_trigger=4 -level_compaction_dynamic_level_bytes=true -compression_type=none -max_background_jobs=12 -rate_limiter_bytes_per_sec=104857600 -benchmark_write_rate_limit=10485760 -num=100000000
```
Results:
- "Burst W-Amp" is the write-amp near the end of the fillrandom benchmark
- "Total W-Amp" is the write-amp after readrandom has run a while and all levels no longer need compaction
Branch | Burst W-Amp | Total W-Amp | fillrandom (MB/s)
-- | -- | -- | --
master | 20.2 | 21.5 | 4.7
dynamic-l0-score | 12.6 | 14.1 | 7.2
Reviewed By: siying
Differential Revision: D23412935
Pulled By: ajkr
fbshipit-source-id: f91f2067188e432dd39deab02f1c56f195057a0e
Summary:
Add a unit test case to check memory usage when
max_write_buffer_size_to_maintain is set if flushed immutable memtables are
trimmed timely or not.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7311
Test Plan: Compared the results with before bug fix.
Reviewed By: ltamasi
Differential Revision: D23321702
Pulled By: akankshamahajan15
fbshipit-source-id: da04ee21137d641a07fd499a9e2749eb036fcb1e
Summary:
A new file interface `SupportPrefetch()` is added. When the user overrides it to `false`, an internal prefetch buffer will be used for readahead. Useful for non-directIO but FS doesn't have readahead support.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7312
Reviewed By: anand1976
Differential Revision: D23329847
Pulled By: jay-zhuang
fbshipit-source-id: 71cd4ce6f4a820840294e4e6aec111ab76175527
Summary:
This is a "real" fix for the issue worked around in https://github.com/facebook/rocksdb/issues/7294.
To get DB checksum info for live files, we now read the manifest file
that will become part of the checkpoint/backup. This requires a little
extra handling in taking a custom checkpoint, including only reading the
manifest file up to the size prescribed by the checkpoint.
This moves GetFileChecksumsFromManifest from backup code to
file_checksum_helper.{h,cc} and removes apparently unnecessary checking
related to column families.
Updated HISTORY.md and warned potential future users of
DB::GetLiveFilesChecksumInfo()
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7309
Test Plan: updated unit test, before and after
Reviewed By: ajkr
Differential Revision: D23311994
Pulled By: pdillinger
fbshipit-source-id: 741e30a2dc1830e8208f7648fcc8c5f000d4e2d5
Summary:
Right now all I/O failures under PartitionIndexReader::CacheDependencies() is swallowed. This doesn't impact correctness but we've made a decision that any I/O error in read path now should be returned to users for awareness. Return errors in those cases instead.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7297
Test Plan: Add a new unit test that ingest errors in this code path and see Get() fails. Only one I/O path is hit in PartitionIndexReader::CacheDependencies(). Several option changes are attempt but not able to got other pread paths triggered. Not sure whether other failure cases would be even possible. Would rely on continuous stress test to validate it.
Reviewed By: anand1976
Differential Revision: D23257950
fbshipit-source-id: 859dbc92fa239996e1bb378329344d3d54168c03
Summary:
When SST file is created, application is able to know the file information through OnTableFileCreated callback in LogAndNotifyTableFileCreationFinished. Since file checksum information can be useful for application when the SST file is created, we add file_checksum and file_checksum_func_name information to TableFileCreationInfo, which will be passed through OnTableFileCreated.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7108
Test Plan: make check, listener_test.
Reviewed By: ajkr
Differential Revision: D22470240
Pulled By: zhichao-cao
fbshipit-source-id: 92c20344d9b986eadfe3480f3769bf4add0dbaae
Summary:
After releasing a snapshot, it checks whether it is suitable to trigger bottom compactions.
When disabling auto compactions, it may still schedule compaction when releasing a snapshot. Whereas no compaction job will be actually handled, so the state of LSM is not changed and compaction will be triggered again and again every time releasing a snapshot.
Too frequent compactions lead to high CPU usage and high db_mutex lock contention which affects foreground write duration finally.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7267
Test Plan:
- make check
- manual test
Reviewed By: akankshamahajan15
Differential Revision: D23252880
Pulled By: ajkr
fbshipit-source-id: 4431e071a35d9912a2a3592875db27bae521434b
Summary:
When a memtable is trimmed in MemTableListVersion, the memtable
is only added to delete list if it is
the last reference. However it is not the last reference as it is held
by the super version. But the super version would not be switched if the
delete list is empty. So the memtable is never destroyed and memory
usage increases beyond write_buffer_size +
max_write_buffer_size_to_maintain.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7296
Test Plan:
1. ./db_bench -benchmarks=randomtransaction
-optimistic_transaction_db=1 -statistics -stats_interval_seconds=1
-duration=90 -num=500000 --max_write_buffer_size_to_maintain=16000000
--transaction_set_snapshot
Reviewed By: ltamasi
Differential Revision: D23267395
Pulled By: akankshamahajan15
fbshipit-source-id: 3a8d437fe9f4015f851ff84c0e29528aa946b650
Summary:
On a read-write DB configured with
DBOptions::file_checksum_gen_factory, BackupEngine::CreateNewBackup can
fail intermittently, with non-OK status. This is due to a race between
GetLiveFiles and GetLiveFilesChecksumInfo in creating backups.
For patching 6.12 release (as this commit is intended for, except this is a
forward-merged version), we can simply treat files for which we falsely failed
to get checksum info as legacy files lacking checksum info.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7294
Test Plan: unit test reproducer included
Reviewed By: ajkr
Differential Revision: D23253489
Pulled By: pdillinger
fbshipit-source-id: 9e4945dad120b776ad3e753be10b962f61f28e14
Summary:
The two features are naturally incompatible. WAL recycling expects the recovery to succeed upon encountering a corrupt record at the point where new data ends and recycled data remains at the tail. However, `WALRecoveryMode::kTolerateCorruptedTailRecords` must fail upon encountering any such corrupt record, as it cannot differentiate between this and a real corruption, which would cause committed updates to be truncated.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7271
Reviewed By: riversand963
Differential Revision: D23169923
Pulled By: ajkr
fbshipit-source-id: 2cf8a3bcd2c9a0ecb0055a84725047a10fd4db50
Summary:
Add `kEntryDeleteWithTimestamp` to `EntryType` which is a public API.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7195
Test Plan: make check
Reviewed By: ajkr
Differential Revision: D22914704
Pulled By: riversand963
fbshipit-source-id: 886f73c6b70c527cad1c8fc9fc8d3afe60e1ea39
Summary:
There is potential data race related CompactRange() with level refitting. After the compaction step and refitting step, some automatic compaction could put data to the destination level and cause the DB to be corrupted. Fix the bug by checking the target level to be empty.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7261
Test Plan: Add a unit test, which would fail with "Corruption: L1 have overlapping ranges '666F6F' seq:6, type:1 vs. '626172' seq:2, type:1", and now it succeeds.
Reviewed By: ajkr
Differential Revision: D23142269
fbshipit-source-id: 28bc14d5ac934c192260b23a4ce3f10a95e3ee91
Summary:
Have a global StatsDumpScheduler for all DB instance stats dumping, including `DumpStats()` and `PersistStats()`. Before this, there're 2 dedicate threads for every DB instance, one for DumpStats() one for PersistStats(), which could create lots of threads if there're hundreds DB instances.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7223
Reviewed By: riversand963
Differential Revision: D23056737
Pulled By: jay-zhuang
fbshipit-source-id: 0faa2311142a73433ebb3317361db7cbf43faeba
Summary:
Manual compaction with `CompactRangeOptions::change_levels` set could
refit to a level targeted by another manual compaction. If
force_consistency_checks were disabled, it could be possible for
overlapping files to be written at that target level.
This PR prevents the possibility by calling `DisableManualCompaction()`
prior to `ReFitLevel()`. It also improves the manual compaction disabling
mechanism to wait for pending manual compactions to complete before
returning, and support disabling from multiple threads.
Fixes https://github.com/facebook/rocksdb/issues/6432.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7250
Test Plan:
crash test command that repro'd the bug reliably:
```
$ TEST_TMPDIR=/dev/shm python tools/db_crashtest.py blackbox --simple -target_file_size_base=524288 -write_buffer_size=1048576 -clear_column_family_one_in=0 -reopen=0 -max_key=10000000 -column_families=1 -max_background_compactions=8 -compact_range_one_in=100000 -compression_type=none -compaction_style=1 -num_levels=5 -universal_min_merge_width=4 -universal_max_merge_width=8 -level0_file_num_compaction_trigger=12 -rate_limiter_bytes_per_sec=1048576000 -universal_max_size_amplification_percent=100 --duration=3600 --interval=60 --use_direct_io_for_flush_and_compaction=0 --use_direct_reads=0 --enable_compaction_filter=0
```
Reviewed By: ltamasi
Differential Revision: D23090800
Pulled By: ajkr
fbshipit-source-id: afcbcd51b42ce76789fdb907d8b9ada790709c13
Summary:
A new option `std::shared_ptr<FileChecksumGenFactory> backup_checksum_gen_factory` is added to `BackupableDBOptions`. This allows custom checksum functions to be used for creating, verifying, or restoring backups.
Tests are added.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7085
Test Plan: Passed make check
Reviewed By: pdillinger
Differential Revision: D22390756
Pulled By: gg814
fbshipit-source-id: 3b7756ca444c2129844536b91c3ca09f53b6248f
Summary:
https://github.com/facebook/rocksdb/pull/5289 introduces a performance regression that caused an upper bound check within every BlockBasedTableIterator::Next(). This is unnecessary if we've checked the boundary key for current block and it is within upper bound.
Fix the bug. Also rename the boolean to a enum so that the code is slightly better readable. The original regression was probably to fix a bug that the block upper bound check status is not reset after a new block is created. Fix it bug so that the regression can be avoided without hitting the bug.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7209
Test Plan: Run all existing tests. Will run atomic black box crash test for a while.
Reviewed By: anand1976
Differential Revision: D22859246
fbshipit-source-id: cbdad1f5e656c55fd8b71726d5a4f6cb53ff9140
Summary:
SST Partitioner interface that allows to split SST files during compactions.
It basically instruct compaction to create a new file when needed. When one is using well defined prefixes and prefixed way of defining tables it is good to define also partitioning so that promotion of some SST file does not cover huge key space on next level (worst case complete space).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6957
Reviewed By: ajkr
Differential Revision: D22461239
fbshipit-source-id: 9ce07bba08b3ba89c2d45630520368f704d1316e
Summary:
When paraoid_files_checks=true, a rolling key-value hash is generated and compared to what is written to the file. If the values do not match, the SST file is rejected.
Code put in place for the check for both flush and compaction jobs. Corresponding test added to corruption_test.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7134
Reviewed By: cheng-chang
Differential Revision: D22646149
fbshipit-source-id: 8fde1984a1a11edd3bd82a413acffc5ea7aa683f
Summary:
Issue https://github.com/facebook/rocksdb/issues/7133 reported that using `system_clock` in `FileOperationInfo::TimePoint` causes the duration of file flush operation (which can be a noop on MacOS in some scenarios) appears to be 0 and fail an assertion in listener_test. Using `steady_clock` supposedly fixed the problem.
`steady_clock` actually fits better into the use cases of `FileOperationInfo::TimePoint` as all usages care about durations but not wall clock time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7153
Test Plan: make check.
Reviewed By: riversand963
Differential Revision: D22654136
Pulled By: roghnin
fbshipit-source-id: 5980b1080734bdae496a18071a2c2b5887c67d85
Summary:
BackupEngine requires computing table checksums twice when backing up table files to the `shared_checksum` directory.
The repeated computation can be avoided by utilizing the db session id stored as a part of the table properties.
Filenames of table files in the `shared_checksum` directory depend on the following conditions:
1. the naming scheme is `kOptionalChecksumAndDbSessionId`,
2. `db_session_id` is not empty,
3. checksum is available in the DB manifest.
If 1,2,3 are satisfied, then the filenames will be of the form `<file_number>_<checksum>_<db_session_id>.sst`.
If 1,2 are satisfied, then the filenames will be of the form `<file_number>_<db_session_id>.sst`.
In all other cases, the filenames are of the form `<file_number>_<checksum>_<size>.sst`.
Additionally, if `kOptionalChecksumAndDbSessionId` is used (and not falling back to `kChecksumAndFileSize`), the `<checksum>` appeared in the filenames is hexadecimally encoded, instead of being plain `uint32_t` value.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7110
Test Plan: backupable_db_test and manual tests.
Reviewed By: ajkr
Differential Revision: D22508992
Pulled By: gg814
fbshipit-source-id: 5669f0ea9ad5a097f69f6d87aca4abba15032389
Summary:
Previously when running `db_bench` with large value for `num_multi_dbs` and enabled `Options::dump_malloc_stats`, we would see most CPU spent in jemalloc locking. After this PR that no longer shows up at the top of the profile.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7145
Reviewed By: riversand963
Differential Revision: D22593031
Pulled By: ajkr
fbshipit-source-id: 3b3fc91f93249c6afee53f59f34c487c3fc5add6
Summary:
In current codebase, in write path, if Retryable IO Error happens, SetBGError is called. The retryable IO Error is converted to hard error and DB is in read only mode. User or application needs to resume it. In this PR, if Retryable IO Error happens in one DB, SetBGError will create a new thread to call Resume (auto resume). otpions.max_bgerror_resume_count controls if auto resume is enabled or not (if max_bgerror_resume_count<=0, auto resume will not be enabled). options.bgerror_resume_retry_interval controls the time interval to call Resume again if the previous resume fails due to the Retryable IO Error. If non-retryable error happens during resume, auto resume will terminate.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6765
Test Plan: Added the unit test cases in error_handler_fs_test and pass make asan_check
Reviewed By: anand1976
Differential Revision: D21916789
Pulled By: zhichao-cao
fbshipit-source-id: acb8b5e5dc3167adfa9425a5b7fc104f6b95cb0b
Summary:
Currently, RocksDB lets compaction to go through even in case of
corrupted keys, the number of which is reported in CompactionJobStats.
However, RocksDB does not check this value. We should let compaction run
in a stricter mode.
Temporarily disable two tests that allow corrupted keys in compaction.
With this PR, the two tests will assert(false) and terminate. Still need
to investigate what is the recommended google-test way of doing it.
Death test (EXPECT_DEATH) in gtest has warnings now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7124
Test Plan: make check
Reviewed By: ajkr
Differential Revision: D22530722
Pulled By: riversand963
fbshipit-source-id: 6a5a6a992028c6d4f92cb74693c92db462ae4ad6
Summary:
This is a followup to https://github.com/facebook/rocksdb/issues/6646. In that PR, for simplicity I just appended a comparison against the 0th restart key in case `BinarySeek()`'s binary search landed at index 0. As a result there were `2/(N+1) + log_2(N)` key comparisons. This PR does it differently. Now we expand the binary search range by one so it also covers the case where target is at or before the restart key at index 0. As a result, it involves `log_2(N+1)` key comparisons.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7068
Test Plan:
ran readrandom with mostly default settings and counted key comparisons
using `PerfContext`.
before: `user_key_comparison_count = 28881965`
after: `user_key_comparison_count = 27823245`
setup command:
```
$ TEST_TMPDIR=/dev/shm/dbbench ./db_bench -benchmarks=fillrandom,compact -write_buffer_size=1048576 -target_file_size_base=1048576 -max_bytes_for_level_base=4194304 -max_background_jobs=12 -level_compaction_dynamic_level_bytes=true -num=10000000
```
benchmark command:
```
$ TEST_TMPDIR=/dev/shm/dbbench/ ./db_bench -use_existing_db=true -benchmarks=readrandom -disable_auto_compactions=true -num=10000000 -compression_type=none -reads=1000000 -perf_level=3
```
Reviewed By: anand1976
Differential Revision: D22357032
Pulled By: ajkr
fbshipit-source-id: 8b01e9c1c2a4e9d02fc9dfe16c1cc0327f8bdf24
Summary:
When format_version is high enough to support user-key and
there are index entries for same user key that spans multiple data
blocks then it changes from user-key mode to internal-key mode. But the
flush policy is not reset to point to Block Builder of internal-keys.
After this switch, no entries are added to user key index partition
result, thus it never triggers flushing the block.
Fix: 1. After adding the entry in sub_builder_index_, if there is a switch
from user-key to internal-key, then flush policy is updated to point to
Block Builder of internal-keys index partition.
2. Set sub_builder_index_->seperator_is_key_plus_seq_ = true if
seperator_is_key_plus_seq_ is set to true so that subsequent partitions
can also use internal key mode.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7096
Test Plan: make check -j64
Reviewed By: ajkr
Differential Revision: D22416598
Pulled By: akankshamahajan15
fbshipit-source-id: 01fc2dc07ea1b32f8fb803995ebe6e9a3fbe67ac
Summary:
Currently, `EventListener` in listner.h only have callback functions for file read and write. One may favor extended callback functions for more file I/O operations like flush, sync and close. This PR tries to add those interface and have them called when appropriate throughout the code base.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7055
Test Plan:
Write an experimental listener with those new callback functions with log output in them; run experiments and check logs to see those functions are actually called.
Default test suits `make check` should also be included.
Reviewed By: riversand963
Differential Revision: D22380624
Pulled By: roghnin
fbshipit-source-id: 4121491d45c2c2aae8c255e7998090559a241c6a
Summary:
When table file checksums are enabled and stored in the DB manifest by using the RocksDB default crc32c checksum function, BackupEngine will calculate the crc32c checksum of the file to be copied and compare the calculated result with the one stored in the DB manifest before copying the file to the backup directory.
After copying to the backup directory, BackupEngine will verify the checksum of the copied file with the one calculated before copying. This helps detect some rare corruption events such as bit-flips during the copying process.
No verification with checksums in DB manifest will be performed if the table file checksum function is not the RocksDB default crc32c checksum function.
In addition, If `share_table_files` and `share_files_with_checksum` are true, BackupEngine will compare the checksums computed before and after copying of the table files.
Corresponding tests are added.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7015
Test Plan: Passed make check
Reviewed By: pdillinger
Differential Revision: D22165732
Pulled By: gg814
fbshipit-source-id: ee0e8cc397c455eba64545c29380b9d9853588ec
Summary:
When format_version is high enough to support user-key and there are index entries for same user key that spans multiple data blocks then it changes from user-key mode to internal-key mode. But the flush policy is not reset to point to Block Builder of internal-keys. After this switch, no entries are added to user key index partition result, thus it never triggers flushing the block.
Fix: After adding the entry in sub_builder_index_, if there is a switch from user-key to internal-key, then flush policy is updated to point to Block Builder of internal-keys index partition.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7022
Test Plan:
1. make check -j64
2. Added one unit test case
Reviewed By: ajkr
Differential Revision: D22197734
Pulled By: akankshamahajan15
fbshipit-source-id: d87e9e46bccab8e896ee6979d6b79c51f73d479e
Summary:
`bool BackupableDBOptions::new_naming_for_backup_files` is updated to `BackupTableNameOption BackupableDBOptions::share_files_with_checksum_naming`, where `BackupTableNameOption` is an `enum` type with two enumerators `kChecksumAndFileSize` and `kChecksumAndFileSize`. This opens up possibilities of extenting the current naming scheme for backup table files. By default, `BackupTableNameOption BackupableDBOptions::share_files_with_checksum_naming` is set to `kChecksumAndDbSessionId`.
Revert `BackupEngine::VerifyBackup` to only check file sizes by default.
Also fix the construction of the `SstFileDumper` in `GetFileDbIdentities` by setting a proper `Env` of the `Options` passed in the constructor.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7032
Test Plan: make check
Reviewed By: ajkr
Differential Revision: D22237763
Pulled By: gg814
fbshipit-source-id: 466902a4e731babd64e30f0e82ca1aa82962e52e
Summary:
Added compaction filter support for BlobDB non-TTL values. Same as vanilla RocksDB, user compaction filter applies to all k/v pairs of the compaction for non-TTL values. It honors `min_blob_size`, which potentially results value transitions between inlined data and stored-in-blob data when size of value is changed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6850
Reviewed By: siying
Differential Revision: D22263487
Pulled By: ltamasi
fbshipit-source-id: 8fc03f8cde2a5c831e63b436b3dbf1b7f90939e8
Summary:
A parameter `verify_with_checksum` is added to `BackupEngine::VerifyBackup`, which is true by default. So now `BackupEngine::VerifyBackup` verifies backup files with checksum AND file size by default. When `verify_with_checksum` is false, `BackupEngine::VerifyBackup` only compares file sizes to verify backup files.
Also add a test for the case when corruption does not change the file size.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7014
Test Plan: Passed backupable_db_test
Reviewed By: zhichao-cao
Differential Revision: D22165590
Pulled By: gg814
fbshipit-source-id: 606a7450714e868bceb38598c89fd356c6004f4f
Summary:
`DB::OpenForReadOnly()` now returns `Status::NotFound` when the specified DB directory does not exist. Previously the error returned depended on the underlying `Env`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7023
Reviewed By: ajkr
Differential Revision: D22207845
Pulled By: gg814
fbshipit-source-id: f35830811a0e67efb0ee82eda3a9739bc526baba
Summary:
`BackupableDBOptions::new_naming_for_backup_files` is added. This option is false by default. When it is true, backup table filenames under directory shared_checksum are of the form `<file_number>_<crc32c>_<db_session_id>.sst`.
Note that when this option is true, it comes into effect only when both `share_files_with_checksum` and `share_table_files` are true.
Three new test cases are added.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6997
Test Plan: Passed make check.
Reviewed By: ajkr
Differential Revision: D22098895
Pulled By: gg814
fbshipit-source-id: a1d9145e7fe562d71cde7ac995e17cb24fd42e76
Summary:
This PR provides preliminary support for handling IO error during MANIFEST write.
File write/sync is not guaranteed to be atomic. If we encounter an IOError while writing/syncing to the MANIFEST file, we cannot be sure about the state of the MANIFEST file. The version edits may or may not have reached the file. During cleanup, if we delete the newly-generated SST files referenced by the pending version edit(s), but the version edit(s) actually are persistent in the MANIFEST, then next recovery attempt will process the version edits(s) and then fail since the SST files have already been deleted.
One approach is to truncate the MANIFEST after write/sync error, so that it is safe to delete the SST files. However, file truncation may not be supported on certain file systems. Therefore, we take the following approach.
If an IOError is detected during MANIFEST write/sync, we disable file deletions for the faulty database. Depending on whether the IOError is retryable (set by underlying file system), either RocksDB or application can call `DB::Resume()`, or simply shutdown and restart. During `Resume()`, RocksDB will try to switch to a new MANIFEST and write all existing in-memory version storage in the new file. If this succeeds, then RocksDB may proceed. If all recovery is completed, then file deletions will be re-enabled.
Note that multiple threads can call `LogAndApply()` at the same time, though only one of them will be going through the process MANIFEST write, possibly batching the version edits of other threads. When the leading MANIFEST writer finishes, all of the MANIFEST writing threads in this batch will have the same IOError. They will all call `ErrorHandler::SetBGError()` in which file deletion will be disabled.
Possible future directions:
- Add an `ErrorContext` structure so that it is easier to pass more info to `ErrorHandler`. Currently, as in this example, a new `BackgroundErrorReason` has to be added.
Test plan (dev server):
make check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6949
Reviewed By: anand1976
Differential Revision: D22026020
Pulled By: riversand963
fbshipit-source-id: f3c68a2ef45d9b505d0d625c7c5e0c88495b91c8
Summary:
New experimental option BBTO::optimize_filters_for_memory builds
filters that maximize their use of "usable size" from malloc_usable_size,
which is also used to compute block cache charges.
Rather than always "rounding up," we track state in the
BloomFilterPolicy object to mix essentially "rounding down" and
"rounding up" so that the average FP rate of all generated filters is
the same as without the option. (YMMV as heavily accessed filters might
be unluckily lower accuracy.)
Thus, the option near-minimizes what the block cache considers as
"memory used" for a given target Bloom filter false positive rate and
Bloom filter implementation. There are no forward or backward
compatibility issues with this change, though it only works on the
format_version=5 Bloom filter.
With Jemalloc, we see about 10% reduction in memory footprint (and block
cache charge) for Bloom filters, but 1-2% increase in storage footprint,
due to encoding efficiency losses (FP rate is non-linear with bits/key).
Why not weighted random round up/down rather than state tracking? By
only requiring malloc_usable_size, we don't actually know what the next
larger and next smaller usable sizes for the allocator are. We pick a
requested size, accept and use whatever usable size it has, and use the
difference to inform our next choice. This allows us to narrow in on the
right balance without tracking/predicting usable sizes.
Why not weight history of generated filter false positive rates by
number of keys? This could lead to excess skew in small filters after
generating a large filter.
Results from filter_bench with jemalloc (irrelevant details omitted):
(normal keys/filter, but high variance)
$ ./filter_bench -quick -impl=2 -average_keys_per_filter=30000 -vary_key_count_ratio=0.9
Build avg ns/key: 29.6278
Number of filters: 5516
Total size (MB): 200.046
Reported total allocated memory (MB): 220.597
Reported internal fragmentation: 10.2732%
Bits/key stored: 10.0097
Average FP rate %: 0.965228
$ ./filter_bench -quick -impl=2 -average_keys_per_filter=30000 -vary_key_count_ratio=0.9 -optimize_filters_for_memory
Build avg ns/key: 30.5104
Number of filters: 5464
Total size (MB): 200.015
Reported total allocated memory (MB): 200.322
Reported internal fragmentation: 0.153709%
Bits/key stored: 10.1011
Average FP rate %: 0.966313
(very few keys / filter, optimization not as effective due to ~59 byte
internal fragmentation in blocked Bloom filter representation)
$ ./filter_bench -quick -impl=2 -average_keys_per_filter=1000 -vary_key_count_ratio=0.9
Build avg ns/key: 29.5649
Number of filters: 162950
Total size (MB): 200.001
Reported total allocated memory (MB): 224.624
Reported internal fragmentation: 12.3117%
Bits/key stored: 10.2951
Average FP rate %: 0.821534
$ ./filter_bench -quick -impl=2 -average_keys_per_filter=1000 -vary_key_count_ratio=0.9 -optimize_filters_for_memory
Build avg ns/key: 31.8057
Number of filters: 159849
Total size (MB): 200
Reported total allocated memory (MB): 208.846
Reported internal fragmentation: 4.42297%
Bits/key stored: 10.4948
Average FP rate %: 0.811006
(high keys/filter)
$ ./filter_bench -quick -impl=2 -average_keys_per_filter=1000000 -vary_key_count_ratio=0.9
Build avg ns/key: 29.7017
Number of filters: 164
Total size (MB): 200.352
Reported total allocated memory (MB): 221.5
Reported internal fragmentation: 10.5552%
Bits/key stored: 10.0003
Average FP rate %: 0.969358
$ ./filter_bench -quick -impl=2 -average_keys_per_filter=1000000 -vary_key_count_ratio=0.9 -optimize_filters_for_memory
Build avg ns/key: 30.7131
Number of filters: 160
Total size (MB): 200.928
Reported total allocated memory (MB): 200.938
Reported internal fragmentation: 0.00448054%
Bits/key stored: 10.1852
Average FP rate %: 0.963387
And from db_bench (block cache) with jemalloc:
$ ./db_bench -db=/dev/shm/dbbench.no_optimize -benchmarks=fillrandom -format_version=5 -value_size=90 -bloom_bits=10 -num=2000000 -threads=8 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=false
$ ./db_bench -db=/dev/shm/dbbench -benchmarks=fillrandom -format_version=5 -value_size=90 -bloom_bits=10 -num=2000000 -threads=8 -optimize_filters_for_memory -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=false
$ (for FILE in /dev/shm/dbbench.no_optimize/*.sst; do ./sst_dump --file=$FILE --show_properties | grep 'filter block' ; done) | awk '{ t += $4; } END { print t; }'
17063835
$ (for FILE in /dev/shm/dbbench/*.sst; do ./sst_dump --file=$FILE --show_properties | grep 'filter block' ; done) | awk '{ t += $4; } END { print t; }'
17430747
$ #^ 2.1% additional filter storage
$ ./db_bench -db=/dev/shm/dbbench.no_optimize -use_existing_db -benchmarks=readrandom,stats -statistics -bloom_bits=10 -num=2000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=false -duration=10 -cache_index_and_filter_blocks -cache_size=1000000000
rocksdb.block.cache.index.add COUNT : 33
rocksdb.block.cache.index.bytes.insert COUNT : 8440400
rocksdb.block.cache.filter.add COUNT : 33
rocksdb.block.cache.filter.bytes.insert COUNT : 21087528
rocksdb.bloom.filter.useful COUNT : 4963889
rocksdb.bloom.filter.full.positive COUNT : 1214081
rocksdb.bloom.filter.full.true.positive COUNT : 1161999
$ #^ 1.04 % observed FP rate
$ ./db_bench -db=/dev/shm/dbbench -use_existing_db -benchmarks=readrandom,stats -statistics -bloom_bits=10 -num=2000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=false -optimize_filters_for_memory -duration=10 -cache_index_and_filter_blocks -cache_size=1000000000
rocksdb.block.cache.index.add COUNT : 33
rocksdb.block.cache.index.bytes.insert COUNT : 8448592
rocksdb.block.cache.filter.add COUNT : 33
rocksdb.block.cache.filter.bytes.insert COUNT : 18220328
rocksdb.bloom.filter.useful COUNT : 5360933
rocksdb.bloom.filter.full.positive COUNT : 1321315
rocksdb.bloom.filter.full.true.positive COUNT : 1262999
$ #^ 1.08 % observed FP rate, 13.6% less memory usage for filters
(Due to specific key density, this example tends to generate filters that are "worse than average" for internal fragmentation. "Better than average" cases can show little or no improvement.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6427
Test Plan: unit test added, 'make check' with gcc, clang and valgrind
Reviewed By: siying
Differential Revision: D22124374
Pulled By: pdillinger
fbshipit-source-id: f3e3aa152f9043ddf4fae25799e76341d0d8714e
Summary:
EncryptEnv class is both declared and defined within env_encryption.cc. This makes it really tough to derive new classes from that base.
This branch moves declaration of the class to rocksdb/env_encryption.h. The change facilitates making new encryption modules (such as an upcoming openssl AES CTR pull request) possible / easy.
The only coding change was to add the EncryptEnv object to env_basic_test.cc.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6830
Reviewed By: riversand963
Differential Revision: D21706593
Pulled By: ajkr
fbshipit-source-id: 64d2da95a1569ceeb9b1549c3bec5404cf4c89f0
Summary:
The bug fixed in https://github.com/facebook/rocksdb/pull/1816/ is now applicable to iterator too. This was not an issue but https://github.com/facebook/rocksdb/pull/2886 caused the regression. If a put and DB flush happens just between iterator to get latest sequence number and getting super version, empty result for the key or an older value can be returned, which is wrong.
Fix it in the same way as the fix in https://github.com/facebook/rocksdb/issues/1816, that is to get the sequence number after referencing the super version.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6973
Test Plan: Will run stress tests for a while to make sure there is no general regression.
Reviewed By: ajkr
Differential Revision: D22029348
fbshipit-source-id: 94390f93630906796d6e2fec321f44a920953fd1
Summary:
https://github.com/facebook/rocksdb/issues/5411 refactored `VersionSet::Recover` but introduced a bug, explained as follows.
Before, once a checksum mismatch happens, `reporter` will set `s` to be non-ok. Therefore, Recover will stop processing the MANIFEST any further.
```
// Correct
// Inside Recover
LogReporter reporter;
reporter.status = &s;
log::Reader reader(..., reporter);
while (reader.ReadRecord() && s.ok()) {
...
}
```
The bug is that, the local variable `s` in `ReadAndRecover` won't be updated by `reporter` while reading the MANIFEST. It is possible that the reader sees a checksum mismatch in a record, but `ReadRecord` retries internally read and finds the next valid record. The mismatched record will be ignored and no error is reported.
```
// Incorrect
// Inside Recover
LogReporter reporter;
reporter.status = &s;
log::Reader reader(..., reporter);
s = ReadAndRecover(reader, ...);
// Inside ReadAndRecover
Status s; // Shadows the s in Recover.
while (reader.ReadRecord() && s.ok()) {
...
}
```
`LogReporter` can use a separate `log_read_status` to track the errors while reading the MANIFEST. RocksDB can process more MANIFEST entries only if `log_read_status.ok()`.
Test plan (devserver):
make check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6996
Reviewed By: ajkr
Differential Revision: D22105746
Pulled By: riversand963
fbshipit-source-id: b22f717a423457a41ca152a242abbb64cf91fc38
Summary:
Compressed block cache is disabled in https://github.com/facebook/rocksdb/pull/4650 for no good reason. Re-enable it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6990
Test Plan: Add a unit test to make sure a general function works with read-only DB + compressed block cache.
Reviewed By: ltamasi
Differential Revision: D22072755
fbshipit-source-id: 2a55df6363de23a78979cf6c747526359e5dc7a1
Summary:
`db_id` and `db_session_id` are now part of the table properties for all formats and stored in SST files. This adds about 99 bytes to each new SST file.
The `TablePropertiesNames` for these two identifiers are `rocksdb.creating.db.identity` and `rocksdb.creating.session.identity`.
In addition, SST files generated from SstFileWriter and Repairer have DB identity “SST Writer” and “DB Repairer”, respectively. Their DB session IDs are generated in the same way as `DB::GetDbSessionId`.
A table property test is added.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6983
Test Plan: make check and some manual tests.
Reviewed By: zhichao-cao
Differential Revision: D22048826
Pulled By: gg814
fbshipit-source-id: afdf8c11424a6f509b5c0b06dafad584a80103c9
Summary:
In best-efforts recovery, an error that is not Corruption or IOError::kNotFound or IOError::kPathNotFound will be overwritten silently. Fix this by checking all non-ok cases and return early.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6989
Test Plan: make check
Reviewed By: ajkr
Differential Revision: D22071418
Pulled By: riversand963
fbshipit-source-id: 5a4ea5dfb1a41f41c7a3fdaf62b163007b42f04b
Summary:
Best-efforts recovery does not check the content of CURRENT file to determine which MANIFEST to recover from. However, it still checks the presence of CURRENT file to determine whether to create a new DB during `open()`. Therefore, we can tweak the logic in `open()` a little bit so that best-efforts recovery does not rely on CURRENT file at all.
Test plan (dev server):
make check
./db_basic_test --gtest_filter=DBBasicTest.RecoverWithNoCurrentFile
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6970
Reviewed By: anand1976
Differential Revision: D22013990
Pulled By: riversand963
fbshipit-source-id: db552a1868c60ed70e1f7cd252a3a076eb8ea58f
Summary:
Added DB::GetDbSessionId by using the same format and machinery as DB::GetDbIdentity.
The DB Session ID is generated (and therefore, updated) each time a DB object is opened. It is written to the LOG file right after the line of “DB SUMMARY”.
A test for the uniqueness, for different openings and during the same opening, is also added.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6959
Test Plan: Passed make check
Reviewed By: zhichao-cao
Differential Revision: D21951721
Pulled By: gg814
fbshipit-source-id: 958a48a612db49a39998ea703cded45987d3fa8b
Summary:
Persistent cache feature caused rocks db crash on windows. I posted a issue for it, https://github.com/facebook/rocksdb/issues/6919. I found this is because no "persistent_cache_key_prefix" is generated for persistent cache. Looking repo history, "GetUniqueIdFromFile" is not implemented on Windows. So my fix is adding "NewId()" function in "persistent_cache" and using it to generate prefix for persistent cache. In this PR, i also re-enable related test cases defined in "db_test2" and "persistent_cache_test" for windows.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6932
Test Plan:
1. run related test cases in "db_test2" and "persistent_cache_test" on windows and see it passed.
2. manually run db_bench.exe with "read_cache_path" and verified.
Reviewed By: riversand963
Differential Revision: D21911608
Pulled By: cheng-chang
fbshipit-source-id: cdfd938d54a385edbb2836b13aaa1d39b0a6f1c2
Summary:
`Env::LowerThreadPoolCPUPriority` takes a new parameter `CpuPriority` to be able to lower to a specific priority such as `CpuPriority::kIdle`, previously, the priority is always lowered to `CpuPriority::kLow`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6969
Test Plan: unit test `EnvPosixTest::LowerThreadPoolCpuPriority` added to `env_test.cc`.
Reviewed By: siying
Differential Revision: D22011169
Pulled By: cheng-chang
fbshipit-source-id: 568878c24a924912e35cef00c552d4a63431cdf4
Summary:
If `options.wal_recovery_mode == WALRecoveryMode::kPointInTimeRecovery`, RocksDB stops replaying WAL once hitting an error and discards the rest of the WAL. This can lead to data loss if the error occurs at an offset smaller than the last sync'ed offset.
Ideally, RocksDB point-in-time recovery should permit recovery if the error occurs after last synced offset while fail recovery if error occurs before the last synced offset. However, RocksDB does not track the synced offset of WALs. Consequently, RocksDB does not know whether an error occurs before or after the last synced offset. An error can be one of the following.
- WAL record checksum mismatch. This can result from both corruption of synced data and dropping of unsynced data during shutdown. We cannot be sure which one. In order not to defeat the original motivation to permit the latter case, we keep the original behavior of point-in-time WAL recovery.
- IOError. This means the WAL can be bad, an indicator of whole file becoming unavailable, not to mention synced part of the WAL. Therefore, we choose to modify the behavior of point-in-time recovery and fail the database recovery.
Test plan (devserver):
make check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6963
Reviewed By: ajkr
Differential Revision: D22011083
Pulled By: riversand963
fbshipit-source-id: f9cbf29a37dc5cc40d3fa62f89eed1ad67ca1536
Summary:
Application can ingest SST files with file checksum information, such that during ingestion, DB is able to check data integrity and identify of the SST file. The PR introduces generate_and_verify_file_checksum to IngestExternalFileOption to control if the ingested checksum information should be verified with the generated checksum.
1. If generate_and_verify_file_checksum options is *FALSE*: *1)* if DB does not enable SST file checksum, the checksum information ingested will be ignored; *2)* if DB enables the SST file checksum and the checksum function name matches the checksum function name in DB, we trust the ingested checksum, store it in Manifest. If the checksum function name does not match, we treat that as an error and fail the IngestExternalFile() call.
2. If generate_and_verify_file_checksum options is *TRUE*: *1)* if DB does not enable SST file checksum, the checksum information ingested will be ignored; *2)* if DB enable the SST file checksum, we will use the checksum generator from DB to calculate the checksum for each ingested SST files after they are copied or moved. Then, compare the checksum results with the ingested checksum information: _A)_ if the checksum function name does not match, _verification always report true_ and we store the DB generated checksum information in Manifest. _B)_ if the checksum function name mach, and checksum match, ingestion continues and stores the checksum information in the Manifest. Otherwise, terminate file ingestion and report file corruption.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6891
Test Plan: added unit test, pass make asan_check
Reviewed By: pdillinger
Differential Revision: D21935988
Pulled By: zhichao-cao
fbshipit-source-id: 7b55f486632db467e76d72602218d0658aa7f6ed
Summary:
This saves up to two key comparisons in block seeks. The first key
comparison saved is a redundant key comparison against the restart key
where the linear scan starts. This comparison is saved in all cases
except when the found key is in the first restart interval. The
second key comparison saved is a redundant key comparison against the
restart key where the linear scan ends. This is only saved in cases
where all keys in the restart interval are less than the target
(probability roughly `1/restart_interval`).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6646
Test Plan:
ran a benchmark with mostly default settings and counted key comparisons
before: `user_key_comparison_count = 19399529`
after: `user_key_comparison_count = 18431498`
setup command:
```
$ TEST_TMPDIR=/dev/shm/dbbench ./db_bench -benchmarks=fillrandom,compact -write_buffer_size=1048576 -target_file_size_base=1048576 -max_bytes_for_level_base=4194304 -max_background_jobs=12 -level_compaction_dynamic_level_bytes=true -num=10000000
```
benchmark command:
```
$ TEST_TMPDIR=/dev/shm/dbbench/ ./db_bench -use_existing_db=true -benchmarks=readrandom -disable_auto_compactions=true -num=10000000 -compression_type=none -reads=1000000 -perf_level=3
```
Reviewed By: pdillinger
Differential Revision: D20849707
Pulled By: ajkr
fbshipit-source-id: 1f01c5cd99ea771fd27974046e37b194f1cdcfac
Summary:
Memory pinned by `pin_l0_filter_and_index_blocks_in_cache` needs to be predictable based on user config. This PR makes sure
we do not pin extra memory for large files generated by intra-L0 (see https://github.com/facebook/rocksdb/issues/6889).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6911
Test Plan: unit test
Reviewed By: siying
Differential Revision: D21835818
Pulled By: ajkr
fbshipit-source-id: a11a088549d06bed8aacc2548d266e5983f0ead4
Summary:
When MultiGet is called with duplicate keys, and the key matches the
largest key in an SST file and the value type is merge, only the first
instance of the duplicate key is returned with correct results. This is
due to the incorrect assumption that if a key in a batch is equal to the
largest key in the file, the next key cannot be present in that file.
Tests:
Add a new unit test
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6953
Reviewed By: cheng-chang
Differential Revision: D21935898
Pulled By: anand1976
fbshipit-source-id: a2cc327a15150e23fd997546ca64d1c33021cb4c
Summary:
Implemented a subcommand of sst_dump called identify, which determines whether a file is an SST file or identifies and lists all the SST files in a directory;
This update also fixes the problem that sst_dump exits with a success state even if target file/directory does not exist/is not an SST file/is empty/is corrupted.
One test is added to sst_dump_test.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6943
Test Plan: Passed make check and a few manual tests
Reviewed By: pdillinger
Differential Revision: D21928985
Pulled By: gg814
fbshipit-source-id: 9a8b48e0cf1a0e96b13f42b690aba8ad981afad3
Summary:
The ```for``` loop in ```VerifyChecksumInBlocks``` only checks ```index_iter->Valid()``` which could be ```false``` either due to reaching the end of the index or, in case of partitioned index, it could be due to a checksum mismatch error when reading a 2nd level index block. Instead of throwing away the index iterator status, we need to return any errors back to the caller.
Tests:
Add a test in block_based_table_reader_test.cc.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6909
Reviewed By: pdillinger
Differential Revision: D21833922
Pulled By: anand1976
fbshipit-source-id: bc778ebf1121dbbdd768689de5183f07a9f0beae
Summary:
When operation on an open file descriptor fails, we should close the file descriptor.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6936
Test Plan: make check
Reviewed By: pdillinger
Differential Revision: D21885458
Pulled By: riversand963
fbshipit-source-id: ba077a76b256a8537f21e22e4ec198f45390bf50
Summary:
DB::OpenForReadOnly will not write anything to the file system (i.e., create directories or files for the DB) unless create_if_missing is true.
This change also fixes some subcommands of ldb, which write to the file system even if the purpose is for readonly.
Two tests for this updated behavior of DB::OpenForReadOnly are also added.
Other minor changes:
1. Updated HISTORY.md to include this API change of DB::OpenForReadOnly;
2. Updated the help information for the put and batchput subcommands of ldb with the option [--create_if_missing];
3. Updated the comment of Env::DeleteDir to emphasize that it returns OK only if the directory to be deleted is empty.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6900
Test Plan: passed make check; also manually tested a few ldb subcommands
Reviewed By: pdillinger
Differential Revision: D21822188
Pulled By: gg814
fbshipit-source-id: 604cc0f0d0326a937ee25a32cdc2b512f9a3be6e
Summary:
The implementation of GetApproximateSizes was inconsistent in
its treatment of the size of non-data blocks of SST files, sometimes
including and sometimes now. This was at its worst with large portion
of table file used by filters and querying a small range that crossed
a table boundary: the size estimate would include large filter size.
It's conceivable that someone might want only to know the size in terms
of data blocks, but I believe that's unlikely enough to ignore for now.
Similarly, there's no evidence the internal function AppoximateOffsetOf
is used for anything other than a one-sided ApproximateSize, so I intend
to refactor to remove redundancy in a follow-up commit.
So to fix this, GetApproximateSizes (and implementation details
ApproximateSize and ApproximateOffsetOf) now consistently include in
their returned sizes a portion of table file metadata (incl filters
and indexes) based on the size portion of the data blocks in range. In
other words, if a key range covers data blocks that are X% by size of all
the table's data blocks, returned approximate size is X% of the total
file size. It would technically be more accurate to attribute metadata
based on number of keys, but that's not computationally efficient with
data available and rarely a meaningful difference.
Also includes miscellaneous comment improvements / clarifications.
Also included is a new approximatesizerandom benchmark for db_bench.
No significant performance difference seen with this change, whether ~700 ops/sec with cache_index_and_filter_blocks and small cache or ~150k ops/sec without cache_index_and_filter_blocks.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6784
Test Plan:
Test added to DBTest.ApproximateSizesFilesWithErrorMargin.
Old code running new test...
[ RUN ] DBTest.ApproximateSizesFilesWithErrorMargin
db/db_test.cc:1562: Failure
Expected: (size) <= (11 * 100), actual: 9478 vs 1100
Other tests updated to reflect consistent accounting of metadata.
Reviewed By: siying
Differential Revision: D21334706
Pulled By: pdillinger
fbshipit-source-id: 6f86870e45213334fedbe9c73b4ebb1d8d611185
Summary:
`IterKey::UpdateInternalKey()` is an error-prone API as it's
incompatible with `IterKey::TrimAppend()`, which is used for
decoding delta-encoded internal keys. This PR stops using it in
`BlockIter`. Instead, it assigns global seqno in a separate `IterKey`'s
buffer when needed. The logic for safely getting a Slice with global
seqno properly assigned is encapsulated in `GlobalSeqnoAppliedKey`.
`BinarySeek()` is also migrated to use this API (previously it ignored
global seqno entirely).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6843
Test Plan:
benchmark setup -- single file DBs, in-memory, no compression. "normal_db"
created by regular flush; "ingestion_db" created by ingesting a file. Both
DBs have same contents.
```
$ TEST_TMPDIR=/dev/shm/normal_db/ ./db_bench -benchmarks=fillrandom,compact -write_buffer_size=10485760000 -disable_auto_compactions=true -compression_type=none -num=1000000
$ ./ldb write_extern_sst ./tmp.sst --db=/dev/shm/ingestion_db/dbbench/ --compression_type=no --hex --create_if_missing < <(./sst_dump --command=scan --output_hex --file=/dev/shm/normal_db/dbbench/000007.sst | awk 'began {print "0x" substr($1, 2, length($1) - 2), "==>", "0x" $5} ; /^Sst file format: block-based/ {began=1}')
$ ./ldb ingest_extern_sst ./tmp.sst --db=/dev/shm/ingestion_db/dbbench/
```
benchmark run command:
```
TEST_TMPDIR=/dev/shm/$DB/ ./db_bench -benchmarks=seekrandom -seek_nexts=10 -use_existing_db=true -cache_index_and_filter_blocks=false -num=1000000 -cache_size=1048576000 -threads=1 -reads=40000000
```
results:
| DB | code | throughput |
|---|---|---|
| normal_db | master | 267.9 |
| normal_db | PR6843 | 254.2 (-5.1%) |
| ingestion_db | master | 259.6 |
| ingestion_db | PR6843 | 250.5 (-3.5%) |
Reviewed By: pdillinger
Differential Revision: D21562604
Pulled By: ajkr
fbshipit-source-id: 937596f836930515da8084d11755e1f247dcb264
Summary:
1. Add a value_size in read options which limits the cumulative value size of keys read in batches. Once the size exceeds read_options.value_size, all the remaining keys are returned with status Abort without further fetching any key.
2. Add a unit test case MultiGetBatchedValueSizeSimple the reads keys from memory and sst files.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6826
Test Plan:
1. make check -j64
2. Add a new unit test case
Reviewed By: anand1976
Differential Revision: D21471483
Pulled By: akankshamahajan15
fbshipit-source-id: dea51b8e76d5d1df38ece8cdb29933b1d798b900
Summary:
If Option.file_checksum_gen_factory is set, rocksdb generates the file checksum during flush and compaction based on the checksum generator created by the factory and store the checksum and function name in vstorage and Manifest.
This PR enable file checksum generation in SstFileWrite and store the checksum and checksum function name in the ExternalSstFileInfo, such that application can use them for other purpose, for example, ingest the file checksum with files in IngestExternalFile().
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6859
Test Plan: add unit test and pass make asan_check.
Reviewed By: ajkr
Differential Revision: D21656247
Pulled By: zhichao-cao
fbshipit-source-id: 78a3570c76031d8832e3d2de3d6c79cdf2b675d0
Summary:
sst_dump can issue many file reads from the file system. This doesn't work well with file systems without a OS cache, especially remote file systems. In order to mitigate this problem, several improvements are done:
1. --readahead_size is added, so that users can specify readahead size when scanning the data.
2. Force a 512KB tail readahead, which prevents three I/Os for footer, meta index and property blocks and hopefully index and filter blocks too.
3. Consoldiate SSTDump's I/Os before opening the file for read. Use the same file prefetch buffer.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6836
Test Plan: Add a test that covers this new feature.
Reviewed By: pdillinger
Differential Revision: D21516607
fbshipit-source-id: 3ae43526286f67b2f4a5bdedfbc92719d579b87e
Summary:
When using ldb, users cannot turn on force consistency check in most commands, while they cannot use checksonsistnecy with --try_load_options. The change fixes both by:
1. checkconsistency now calls OpenDB() so that it gets all the options loading and sanitized options logic
2. use options.check_consistency_checks = true by default, and add a --disable_consistency_checks to turn it off.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6802
Test Plan: Add a new unit test. Some manual tests with corrupted DBs.
Reviewed By: pdillinger
Differential Revision: D21388051
fbshipit-source-id: 8d122732d391b426e3982a1c3232a8e3763ffad0
Summary:
1. Update column_family_memtables_ to point to latest column_family_set in
version_set after recovery.
2. Normalize file paths passed by application so that directories end with '/'
or '\\'.
3. In addition to missing files, corrupted files are also ignored in
best-efforts recovery.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6824
Test Plan: COMPILE_WITH_ASAN=1 make check
Reviewed By: anand1976
Differential Revision: D21463905
Pulled By: riversand963
fbshipit-source-id: c48db8843cc93c8c1c7139c474b64e6f775307d2
Summary:
Delete triggered compaction in universal compaction mode was causing a corruption when scheduled in parallel with other compactions.
1. When num_levels = 1, a file marked for compaction may be picked along with all older files in L0, without checking if any of them are already being compaction. This can cause unpredictable results like resurrection of older versions of keys or deleted keys.
2. When num_levels > 1, a delete triggered compaction would not get scheduled if it overlaps with a running regular compaction. However, the reverse is not true. This is due to the fact that in ```UniversalCompactionBuilder::CalculateSortedRuns```, it assumes that entire sorted runs are picked for compaction and only checks the first file in a sorted run to determine conflicts. This is violated by a delete triggered compaction as it works on a subset of a sorted run.
Fix the bug for num_levels > 1, and disable the feature for now when num_levels = 1. After disabling this feature, files would still get marked for compaction, but no compaction would get scheduled.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6799
Reviewed By: pdillinger
Differential Revision: D21431286
Pulled By: anand1976
fbshipit-source-id: ae9f0bdb1d6ae2f10284847db731c23f43af164a
Summary:
…e range"
Moved it from the wrong section (6.10) to the right section (Unreleased).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6825
Reviewed By: zhichao-cao
Differential Revision: D21464577
Pulled By: ajkr
fbshipit-source-id: a836b4ab10be2464182826f9411c9c424c933b70
Summary:
The error is assigning KeyContext::s to NotFound status in a
table reader for a "not found in this table" case, which skips searching
in later tables, like only a delete should. (The hash search index iterator
is the only one that can return status NotFound even if Valid() == false.)
This was detected by intermittent failure in
MultiThreadedDBTest.MultiThreaded/5, a kHashSearch configuration.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6821
Test Plan: modified existing unit test to reproduce problem
Reviewed By: anand1976
Differential Revision: D21450469
Pulled By: pdillinger
fbshipit-source-id: 7478003684d637dbd491cdac81468041a791be2c
Summary:
We found some files containing nothing but negative range tombstones,
and unsurprisingly their metadata specified a negative range, which made
things crash. Time to add a bit of user input validation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6788
Reviewed By: zhichao-cao
Differential Revision: D21343719
Pulled By: ajkr
fbshipit-source-id: f1c16e4c3e9fa150958c8c866176632a3206fb74
Summary:
https://github.com/facebook/rocksdb/pull/6807 extends the logic that
identifies and purges obsolete files to blob files handled by RocksDB
itself. In order to prevent that from interfering with the current BlobDB code,
we need to make sure that `BlobDBOptions::blob_dir` is different from
the storage directories used by the base DB. (Note: this is true by default.)
The patch adds a check that explicitly disallows this configuration and
returns `Status::NotSupported` from `BlobDB::Open` in such cases.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6810
Test Plan: Tested using the BlobDB mode of `db_bench`.
Reviewed By: riversand963
Differential Revision: D21412676
Pulled By: ltamasi
fbshipit-source-id: 6630cc7481e48c8bf55d59423b25f14d52ffe681
Summary:
Current impl. of db_stress will abort verification and report failure if
GetLiveFiles() causes a dropped column family to be flushed. This is not
desired.
To fix, this PR makes the following change:
In GetLiveFiles, if flush is triggered and returns
Status::IsColumnFamilyDropped(), then set status to Status::OK().
This is OK because dropped column families will be skipped during the rest of
this function, and valid column families will have their live files returned to
caller.
Test plan (dev server):
make check
./db_stress -ops_per_thread=1000 -get_live_files_one_in=100 -clear_column_family_one_in=100
./db_stress -disable_wal=1 -reopen=0 -ops_per_thread=1000 -get_live_files_one_in=100 -clear_column_family_one_in=100
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6805
Reviewed By: ltamasi
Differential Revision: D21390044
Pulled By: riversand963
fbshipit-source-id: de67846b95a4f1b88aa0a30c3d70c43cc68625b9
Summary:
We are swallowing some file consistency checking failures. This is not expected. We are fixing two cases: DB reopen and manifest dump.
More places are not fixed and need follow-up.
Error from CheckConsistencyForDeletes() is also swallowed, which is not fixed in this PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6793
Test Plan: Add a unit test to cover the reopen case.
Reviewed By: riversand963
Differential Revision: D21366525
fbshipit-source-id: eb438a322237814e8d5125f916a3c6de97f39ded
Summary:
The feature of CompressionOptions::parallel_threads is still not yet mature. Mention it to be experimental in the comments for now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6781
Reviewed By: pdillinger
Differential Revision: D21330678
fbshipit-source-id: d7dd7d099fb002a5c6a5d8da689ce5ee08a9eb13
Summary:
If an error happens during BlobDBImpl::Open after the base DB has been
opened, we need to destroy the `ColumnFamilyHandle`s returned by `DB::Open`
to prevent an assertion in `ColumnFamilySet`'s destructor from being hit.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6763
Test Plan: Ran `make check` and tested using the BlobDB mode of `db_bench`.
Reviewed By: riversand963
Differential Revision: D21262643
Pulled By: ltamasi
fbshipit-source-id: 60ebc7ab19be66cf37fbe5f6d8957d58470f3d3b
Summary:
Summary : 1. Add two arguments --compression_level_from and --compression_level_to to check
the compression size with different compression level in the given range. Users must
specify one compression type else it will error out. Both from and to levels must
also be specified together.
2. Display the time taken to compress each file with different compressions by default.
Test Plan : make -j64 check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6634
Test Plan: make -j64 check
Reviewed By: anand1976
Differential Revision: D20810282
Pulled By: akankshamahajan15
fbshipit-source-id: ac9098d3c079a1fad098f6678dbedb4d888a791b
Summary:
In https://github.com/facebook/rocksdb/pull/6455, we modified the interface of `RandomAccessFileReader::Read` to be able to get rid of memcpy in direct IO mode.
This PR applies the new interface to `BlockFetcher` when reading blocks from SST files in direct IO mode.
Without this PR, in direct IO mode, when fetching and uncompressing compressed blocks, `BlockFetcher` will first copy the raw compressed block into `BlockFetcher::compressed_buf_` or `BlockFetcher::stack_buf_` inside `RandomAccessFileReader::Read` depending on the block size. then during uncompressing, it will copy the uncompressed block into `BlockFetcher::heap_buf_`.
In this PR, we get rid of the first memcpy and directly uncompress the block from `direct_io_buf_` to `heap_buf_`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6689
Test Plan: A new unit test `block_fetcher_test` is added.
Reviewed By: anand1976
Differential Revision: D21006729
Pulled By: cheng-chang
fbshipit-source-id: 2370b92c24075692423b81277415feb2aed5d980
Summary:
After a successful recovery, the CURRENT file should be updated to point to the valid MANIFEST.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6746
Test Plan: make check
Reviewed By: anand1976
Differential Revision: D21189876
Pulled By: riversand963
fbshipit-source-id: 7537b49988c5c425ebe9505a5cc260de351ad79b
Summary:
The methods in convenience.h are used to compare/convert objects to/from strings. There is a mishmash of parameters in use here with more needed in the future. This PR replaces those parameters with a single structure.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6389
Reviewed By: siying
Differential Revision: D21163707
Pulled By: zhichao-cao
fbshipit-source-id: f807b4cc7e2b0af3871536b69546b2604dfa81bd
Summary:
1. Add changes so that max_background_flushes can be set dynamically.
2. Add a testcase DBOptionsTest.SetBackgroundFlushThreads which set the
max_background_flushes dynamically using SetDBOptions.
TestPlan: 1. make -j64 check
2. Using new testcase DBOptionsTest.SetBackgroundFlushThreads
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6701
Reviewed By: ajkr
Differential Revision: D21028010
Pulled By: akankshamahajan15
fbshipit-source-id: 5f949e4a8fd3c32537b637947b7ee09a69cfc7c1
Summary:
IsDirectory() is a common API to check whether a path is a regular file or
directory.
POSIX: call stat() and use S_ISDIR(st_mode)
Windows: PathIsDirectoryA() and PathIsDirectoryW()
HDFS: FileSystem.IsDirectory()
Java: File.IsDirectory()
...
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6711
Test Plan: make check
Reviewed By: anand1976
Differential Revision: D21053520
Pulled By: riversand963
fbshipit-source-id: 680aadfd8ce982b63689190cf31b3145d5a89e27
Summary:
Context: Index type `kBinarySearchWithFirstKey` added the ability for sst file iterator to sometimes report a key from index without reading the corresponding data block. This is useful when sst blocks are cut at some meaningful boundaries (e.g. one block per key prefix), and many seeks land between blocks (e.g. for each prefix, the ranges of keys in different sst files are nearly disjoint, so a typical seek needs to read a data block from only one file even if all files have the prefix). But this added a new error condition, which rocksdb code was really not equipped to deal with: `InternalIterator::value()` may fail with an IO error or Status::Incomplete, but it's just a method returning a Slice, with no way to report error instead. Before this PR, this type of error wasn't handled at all (an empty slice was returned), and kBinarySearchWithFirstKey implementation was considered a prototype.
Now that we (LogDevice) have experimented with kBinarySearchWithFirstKey for a while and confirmed that it's really useful, this PR is adding the missing error handling.
It's a pretty inconvenient situation implementation-wise. The error needs to be reported from InternalIterator when trying to access value. But there are ~700 call sites of `InternalIterator::value()`, most of which either can't hit the error condition (because the iterator is reading from memtable or from index or something) or wouldn't benefit from the deferred loading of the value (e.g. compaction iterator that reads all values anyway). Adding error handling to all these call sites would needlessly bloat the code. So instead I made the deferred value loading optional: only the call sites that may use deferred loading have to call the new method `PrepareValue()` before calling `value()`. The feature is enabled with a new bool argument `allow_unprepared_value` to a bunch of methods that create iterators (it wouldn't make sense to put it in ReadOptions because it's completely internal to iterators, with virtually no user-visible effect). Lmk if you have better ideas.
Note that the deferred value loading only happens for *internal* iterators. The user-visible iterator (DBIter) always prepares the value before returning from Seek/Next/etc. We could go further and add an API to defer that value loading too, but that's most likely not useful for LogDevice, so it doesn't seem worth the complexity for now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6621
Test Plan: make -j5 check . Will also deploy to some logdevice test clusters and look at stats.
Reviewed By: siying
Differential Revision: D20786930
Pulled By: al13n321
fbshipit-source-id: 6da77d918bad3780522e918f17f4d5513d3e99ee
Summary:
Add NewFileChecksumGenCrc32cFactory to file checksum public interface such that applications can use the build in crc32 checksum factory.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6688
Test Plan: pass make asan_check
Reviewed By: riversand963
Differential Revision: D21006859
Pulled By: zhichao-cao
fbshipit-source-id: ea8a45196a8b77c310728ab05f6cc0f49f3baef0
Summary:
In index blocks since `format_version=3`, user keys are written
rather than internal keys. When reading such blocks, the comparator is
obtained via `InternalKeyComparator::user_comparator()`. That function
must not return an unwrapped result as the wrapper class provides
accounting logic to populate `PerfContext::user_key_comparison_count`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6650
Test Plan:
ran db_bench and verified
`PerfContext::user_key_comparison_count` became larger.
Reviewed By: cheng-chang
Differential Revision: D20866325
Pulled By: ajkr
fbshipit-source-id: ad755d46bda31157dacc5b66e532279f19ad538c
Summary:
Although these optimizations are not user facing, still feel it's valuable to call out in HISTORY.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6679
Test Plan: no need
Reviewed By: zhichao-cao
Differential Revision: D20945916
Pulled By: cheng-chang
fbshipit-source-id: f3e790c07f3bcc4a8a74246c4fa232800ddd4438
Summary:
On reading an ingested SST file, `DataBlockIter` will replace seqno encoded in a key with global seqno. However, if the original seqno was part of the prefix used for the next key, the global seqno is by mistake used as part of the prefix to construct the next key, causing wrong result being returned. Although at this point it is only software error while data in the file is not corrupted, the issue can further cause compaction output out of order and corrupted result when the ingested SST participated in compaction. Fixing the issue by save the actual seqno and restore it before the key being used as prefix to construct next key.
The unit test is by Little-Wallace from https://github.com/facebook/rocksdb/issues/6666. Fixing https://github.com/facebook/rocksdb/issues/6666.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6669
Test Plan:
New unit test
Signed-off-by: Yi Wu <yiwu@pingcap.com>
Reviewed By: cheng-chang
Differential Revision: D20931808
Pulled By: ajkr
fbshipit-source-id: f01959c35d6a493954dca981663766c7a5a9e8ab
Summary:
… to CFOptions
https://github.com/facebook/rocksdb/pull/6615 made several compression related options dynamically changeable. They are moved to MutableCFOptions. However, they are not copied back to ColumnFamilyOptions, so the changed values are not written to option files and for some other uses. Fix it by copying them back.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6668
Test Plan: Add a unit test to make sure that when a MutableCFOptions is converted to CFOptions and back to MutableCFOptions, they stay the same. This test would fail without the fix.
Reviewed By: ajkr
Differential Revision: D20923999
fbshipit-source-id: c3bccd6923b00d677764e2269bed6a95ad7ed780
Summary:
This PR adds support for pipelined & parallel compression optimization for `BlockBasedTableBuilder`. This optimization makes block building, block compression and block appending a pipeline, and uses multiple threads to accelerate block compression. Users can set `CompressionOptions::parallel_threads` greater than 1 to enable compression parallelism.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6262
Reviewed By: ajkr
Differential Revision: D20651306
fbshipit-source-id: 62125590a9c15b6d9071def9dc72589c1696a4cb
Summary:
https://github.com/facebook/rocksdb/issues/6247 reports that when write buffer manager fails to insert the dummy entry to block cache, null pointer is still stored and used to release the handle and cause corruption. Fix the bug by not releasing it with null handle.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6619
Test Plan: Add a unit test that fails without the fix.
Reviewed By: ajkr
Differential Revision: D20776769
fbshipit-source-id: 4127fbd9f295a0a3e45774746ffcd91f939f6287
Summary:
These three options should be made dynamically changeable. Simply add them to MutableCFOptions and made the change.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6615
Test Plan: Add a unit test to make sure that SetOptions() can change the options.
Reviewed By: riversand963
Differential Revision: D20755951
fbshipit-source-id: 8165f4fd7a7a665cc7fb049698935022a5d2e7ff
Summary:
For FIFO compaction, we use flush time instead of oldest key time as the
creation time. This is to prevent FIFO compaction dropping files whose oldest
key time is older than TTL but which has newer keys than TTL.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6612
Test Plan: make check
Reviewed By: siying
Differential Revision: D20748217
Pulled By: riversand963
fbshipit-source-id: 3f7b00a847020760537cdddd12f6fe039e5bc663
Summary:
In the current implementation, sst file checksum is calculated by a shared checksum function object, which may make some checksum function hard to be applied here such as SHA1. In this implementation, each sst file will have its own checksum generator obejct, created by FileChecksumGenFactory. User needs to implement its own FilechecksumGenerator and Factory to plugin the in checksum calculation method.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6600
Test Plan: tested with make asan_check
Reviewed By: riversand963
Differential Revision: D20717670
Pulled By: zhichao-cao
fbshipit-source-id: 2a74c1c280ac11a07a1980185b43b671acaa71c6
Summary:
When creating a database backup, the background threads will not only consume IO resources by copying files, but also consuming CPU such as by computing checksums. During peak times, the CPU consumption by the background threads might affect online queries.
This PR makes it possible to decrease CPU priority of these threads when creating a new backup.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6602
Test Plan: make check
Reviewed By: siying, zhichao-cao
Differential Revision: D20683216
Pulled By: cheng-chang
fbshipit-source-id: 9978b9ed9488e8ce135e90ca083e5b4b7221fd84
Summary:
Version 4 has been around long enough, for compatibility and
extensive validation, that it should be default.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6582
Test Plan:
CI (w.r.t. changing the default; format_version=4 is well
tested and massively in production at Facebook)
Reviewed By: siying
Differential Revision: D20625233
Pulled By: pdillinger
fbshipit-source-id: 2f83ed874cffa4a39bc7a66cdf3833b978fbb948
Summary:
When applying a new version in non DB open case, optimize_filters_for_hits is used for max_threads, which is clearly a bug. It is not clear what the indented value in the first place, but it value 1 makes sense here, which would create no extra threads. This bug is not expected to cause user visible problems, assuming C++ implicitly cast bool to 0 or 1.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6576
Test Plan: Run all exsiting test.
Reviewed By: ajkr
Differential Revision: D20602467
fbshipit-source-id: 40b2cd8619aba09ae9242b36c415464db3c9b737
Summary:
There are situations when RocksDB tries to recover, but the db is in an inconsistent state due to SST files referenced in the MANIFEST being missing. In this case, previous RocksDB will just fail the recovery and return a non-ok status.
This PR enables another possibility. During recovery, RocksDB checks possible MANIFEST files, and try to recover to the most recent state without missing table file. `VersionSet::Recover()` applies version edits incrementally and "materializes" a version only when this version does not reference any missing table file. After processing the entire MANIFEST, the version created last will be the latest version.
`DBImpl::Recover()` calls `VersionSet::Recover()`. Afterwards, WAL replay will *not* be performed.
To use this capability, set `options.best_efforts_recovery = true` when opening the db. Best-efforts recovery is currently incompatible with atomic flush.
Test plan (on devserver):
```
$make check
$COMPILE_WITH_ASAN=1 make all && make check
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6334
Reviewed By: anand1976
Differential Revision: D19778960
Pulled By: riversand963
fbshipit-source-id: c27ea80f29bc952e7d3311ecf5ee9c54393b40a8
Summary:
When users fail to open a DB with file lock failure, it is sometimes hard for users to debug. We now include the time the lock is acquired and the thread ID that acquired the lock, to help users debug problems like this. Default Env's thread ID is used.
Since type of lockedFiles is changed, rename it to follow naming convention too.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6507
Test Plan: Add a unit test and improve an existing test to validate the case.
Differential Revision: D20378333
fbshipit-source-id: 312fe0e9733fd1d1e9969c321b90ce523cf4708a
Summary:
Preliminary support for iterator with user timestamp. Current implementation does not consider merge operator and reverse iterator. Auto compaction is also disabled in unit tests.
Create an iterator with timestamp.
```
...
read_opts.timestamp = &ts;
auto* iter = db->NewIterator(read_opts);
// target is key without timestamp.
for (iter->Seek(target); iter->Valid(); iter->Next()) {}
for (iter->SeekToFirst(); iter->Valid(); iter->Next()) {}
delete iter;
read_opts.timestamp = &ts1;
// lower_bound and upper_bound are without timestamp.
read_opts.iterate_lower_bound = &lower_bound;
read_opts.iterate_upper_bound = &upper_bound;
auto* iter1 = db->NewIterator(read_opts);
// Do Seek or SeekToFirst()
delete iter1;
```
Test plan (dev server)
```
$make check
```
Simple benchmarking (dev server)
1. The overhead introduced by this PR even when timestamp is disabled.
key size: 16 bytes
value size: 100 bytes
Entries: 1000000
Data reside in main memory, and try to stress iterator.
Repeated three times on master and this PR.
- Seek without next
```
./db_bench -db=/dev/shm/rocksdbtest-1000 -benchmarks=fillseq,seekrandom -enable_pipelined_write=false -disable_wal=true -format_version=3
```
master: 159047.0 ops/sec
this PR: 158922.3 ops/sec (2% drop in throughput)
- Seek and next 10 times
```
./db_bench -db=/dev/shm/rocksdbtest-1000 -benchmarks=fillseq,seekrandom -enable_pipelined_write=false -disable_wal=true -format_version=3 -seek_nexts=10
```
master: 109539.3 ops/sec
this PR: 107519.7 ops/sec (2% drop in throughput)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6255
Differential Revision: D19438227
Pulled By: riversand963
fbshipit-source-id: b66b4979486f8474619f4aa6bdd88598870b0746
Summary:
In most places in the code the variable names are spelled correctly as
COMMITTED but in a couple places not. This fixes them and ensures the
variable is always called COMMITTED everywhere.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6481
Differential Revision: D20306776
Pulled By: pdillinger
fbshipit-source-id: b6c1bfe41db559b4bc6955c530934460c07f7022
Summary:
In CompactRange, if there is no key in memtable falling in the specified range, then flush is skipped.
This PR extends this skipping logic to SST file levels: it starts compaction from the highest level (starting from L0) that has files with key falling in the specified range, instead of always starts from L0.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6482
Test Plan:
A new test ManualCompactionTest::SkipLevel is added.
Also updated a test related to statistics of index block cache hit in db_test2, the index cache hit is increased by 1 in this PR because when checking overlap for the key range in L0, OverlapWithLevelIterator will do a seek in the table cache iterator, which will read from the cached index.
Also updated db_compaction_test and db_test to use correct range for full compaction.
Differential Revision: D20251149
Pulled By: cheng-chang
fbshipit-source-id: f822157cf4796972bd5035d9d7178d8dfb7af08b
Summary:
When DBImpl::GetCreationTimeOfOldestFile() calls Version::GetCreationTimeOfOldestFile(), the version is not directly or indirectly referenced, so an event like compaction can race with the operation and cause DBImpl::GetCreationTimeOfOldestFile() to access delocated data. This was caught by an ASAN run:
==268==ERROR: AddressSanitizer: heap-use-after-free on address 0x612000b7d198 at pc 0x000018332913 bp 0x7f391510d310 sp 0x7f391510d308
READ of size 8 at 0x612000b7d198 thread T845 (store_load-33)
SCARINESS: 51 (8-byte-read-heap-use-after-free)
#0 0x18332912 in rocksdb::Version::GetCreationTimeOfOldestFile(unsigned long*) rocksdb/src/db/version_set.cc:1488
https://github.com/facebook/rocksdb/issues/1 0x1803ddaa in rocksdb::DBImpl::GetCreationTimeOfOldestFile(unsigned long*) rocksdb/src/db/db_impl/db_impl.cc:4499
https://github.com/facebook/rocksdb/issues/2 0xe24ca09 in rocksdb::StackableDB::GetCreationTimeOfOldestFile(unsigned long*) rocksdb/utilities/stackable_db.h:392
......
0x612000b7d198 is located 216 bytes inside of 296-byte region [0x612000b7d0c0,0x612000b7d1e8)
freed by thread T28 here:
......
https://github.com/facebook/rocksdb/issues/5 0x1832c73f in std::vector<rocksdb::FileMetaData*, std::allocator<rocksdb::FileMetaData*> >::~vector() third-party-buck/platform007/build/libgcc/include/c++/trunk/bits/stl_vector.h:435
https://github.com/facebook/rocksdb/issues/6 0x1832c73f in rocksdb::VersionStorageInfo::~VersionStorageInfo() rocksdb/src/db/version_set.cc:734
https://github.com/facebook/rocksdb/issues/7 0x1832cf42 in rocksdb::Version::~Version() rocksdb/src/db/version_set.cc:758
https://github.com/facebook/rocksdb/issues/8 0x9d1bb5 in rocksdb::Version::Unref() rocksdb/src/db/version_set.cc:2869
https://github.com/facebook/rocksdb/issues/9 0x183e7631 in rocksdb::Compaction::~Compaction() rocksdb/src/db/compaction/compaction.cc:275
https://github.com/facebook/rocksdb/issues/10 0x9e6de6 in std::default_delete<rocksdb::Compaction>::operator()(rocksdb::Compaction*) const third-party-buck/platform007/build/libgcc/include/c++/trunk/bits/unique_ptr.h:78
https://github.com/facebook/rocksdb/issues/11 0x9e6de6 in std::unique_ptr<rocksdb::Compaction, std::default_delete<rocksdb::Compaction> >::reset(rocksdb::Compaction*) third-party-buck/platform007/build/libgcc/include/c++/trunk/bits/unique_ptr.h:376
https://github.com/facebook/rocksdb/issues/12 0x9e6de6 in rocksdb::DBImpl::BackgroundCompaction(bool*, rocksdb::JobContext*, rocksdb::LogBuffer*, rocksdb::DBImpl::PrepickedCompaction*, rocksdb::Env::Priority) rocksdb/src/db/db_impl/db_impl_compaction_flush.cc:2826
https://github.com/facebook/rocksdb/issues/13 0x9ac3b8 in rocksdb::DBImpl::BackgroundCallCompaction(rocksdb::DBImpl::PrepickedCompaction*, rocksdb::Env::Priority) rocksdb/src/db/db_impl/db_impl_compaction_flush.cc:2320
https://github.com/facebook/rocksdb/issues/14 0x9abff7 in rocksdb::DBImpl::BGWorkCompaction(void*) rocksdb/src/db/db_impl/db_impl_compaction_flush.cc:2096
......
Fix the issue by reference the super version and use the referenced version from it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6473
Test Plan: Run ASAN for all existing tests.
Differential Revision: D20196416
fbshipit-source-id: 5f4a7918110fc7b8dd7841932d376bc9d1e59d6f
Summary:
Original author: jeffrey-xiao
If we are writing a global seqno for an ingested file, the range
tombstone metablock gets accessed and put into the cache during
ingestion preparation. At the time, the global seqno of the ingested
file has not yet been determined, so the cached block will not have a
global seqno. When the file is ingested and we read its range tombstone
metablock, it will be returned from the cache with no global seqno. In
that case, we use the actual seqnos stored in the range tombstones,
which are all zero, so the tombstones cover nothing.
This commit removes global_seqno_ variable from Block. When iterating
over a block, the global seqno for the block is determined by the
iterator instead of storing this mutable attribute in Block.
Additionally, this commit adds a regression test to check that keys are
deleted when ingesting a file with a global seqno and range deletion
tombstones.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6429
Differential Revision: D19961563
Pulled By: ajkr
fbshipit-source-id: 5cf777397fa3e452401f0bf0364b0750492487b7
Summary:
Currently, a new MANIFEST file is assigned a new file number when 1) no
MANIFEST is open, or 2) current MANIFEST file size exceeds a threshold. This is
not sufficient. There are cases when the caller explicitly specifies that a new
MANIFEST be created. For example, if user sets options.write_dbid_to_manifest = true,
and there are WAL files, then RocksDB will run into an issue during recovery.
`DBImpl::Recover()` will call `LogAndApply()` to write dbid. At this point, the db being
recovered creates a new MANIFEST, say, MANIFEST-000003. Since there are WALs,
`DBImpl::RecoverLogFiles` will be called. Towards the end of this function, we call
`LogAndApply(new_descriptor_log=true)`, which explicitly creates a new MANIFEST.
However, the manifest_file_number is wrong before this fix. Consequently, RocksDB
opens an existing, non-empty file for append, effectively truncating the file to zero.
If a crash occurs, then there will be data loss.
Test Plan (devserver):
make check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6426
Test Plan: make check
Differential Revision: D19951866
Pulled By: riversand963
fbshipit-source-id: 4b1b9fc28d4fe2ac12764b388ef9e61f05e766da
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433
Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.
Differential Revision: D19977691
fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
Summary:
We realized bugs related to IO Uring. Turn it off by default.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6405
Test Plan: Manually run build_tools/build_detect_platform and observe outputs.
Differential Revision: D19862792
fbshipit-source-id: 5d5e8e2762997b72a145ae59389ef3d7e4ccd060
Summary:
Unrevert the previous fix to propagate error status, and an additional fix to not treat a memtable lookup MergeInProgress status as an error.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6403
Test Plan:
Unit tests
Tried running stress tests but couldn't repro the stress failure
Differential Revision: D19846721
Pulled By: anand1976
fbshipit-source-id: 7db10cccbdc863d9b559497f0a46b608d2488ca4
Summary:
It is very useful to support direct ByteBuffers in Java. It allows to have zero memory copy and some serializers are using that directly so one do not need to create byte[] array for it.
This change also contains some fixes for Windows JNI build.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/2283
Differential Revision: D19834971
Pulled By: pdillinger
fbshipit-source-id: 44173aa02afc9836c5498c592fd1ea95b6086e8e
Summary:
This reverts commit d70011bccc. The commit is causing some stress test failure due to unexpected Status::MergeInProgress() return for some keys.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6401
Differential Revision: D19826623
Pulled By: anand1976
fbshipit-source-id: edd634cede9cb7bdd2cb8f46e662ea709b16d2f1
Summary:
In the current code base, RocksDB generate the checksum for each block and verify the checksum at usage. Current PR enable SST file checksum. After a SST file is generated by Flush or Compaction, RocksDB generate the SST file checksum and store the checksum value and checksum method name in the vs_info and MANIFEST as part for the FileMetadata.
Added the enable_sst_file_checksum to Options to enable or disable file checksum. Added sst_file_checksum to Options such that user can plugin their own SST file checksum calculate method via overriding the SstFileChecksum class. The checksum information inlcuding uint32_t checksum value and a checksum name (string). A new tool is added to LDB such that user can dump out a list of file checksum information from MANIFEST. If user enables the file checksum but does not provide the sst_file_checksum instance, RocksDB will use the default crc32checksum implemented in table/sst_file_checksum_crc32c.h
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6216
Test Plan: Added the testing case in table_test and ldb_cmd_test to verify checksum is correct in different level. Pass make asan_check.
Differential Revision: D19171461
Pulled By: zhichao-cao
fbshipit-source-id: b2e53479eefc5bb0437189eaa1941670e5ba8b87
Summary:
Currently, any IO errors and checksum mismatches while reading data
blocks, are being ignored by the batched MultiGet. Its only looking at
the GetContext state. Fix that.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6387
Test Plan: Add unit tests
Differential Revision: D19799819
Pulled By: anand1976
fbshipit-source-id: 46133dccbb04e64067b9fe6cda73e282203db969
Summary:
Right, when reading from option files, no readahead is used and 8KB buffer is used. It might introduce high latency if the file system provide high latency and doesn't do readahead. Instead, introduce a readahead to the file. When calling inside DB, infer the value from options.log_readahead. Otherwise, a default 512KB readahead size is used.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6372
Test Plan: Add --log_readahead_size in db_bench. Run it with several options and observe read size from option files using strace.
Differential Revision: D19727739
fbshipit-source-id: e6d8053b0a64259abc087f1f388b9cd66fa8a583
Summary:
BlobDB keeps track of the mapping between SSTs and blob files using
the `OnFlushCompleted` and `OnCompactionCompleted` callbacks of
the `EventListener` interface: upon receiving a flush notification, a link
is added between the newly flushed SST and the corresponding blob file;
for compactions, links are removed for the inputs and added for the outputs.
The earlier code performed this link deletion and addition even for
trivially moved files; the new code walks through the two lists together
(in a fashion that's similar to merge sort) and skips such files.
This should mitigate https://github.com/facebook/rocksdb/issues/6338,
wherein an assertion is triggered with the earlier code when a compaction
notification for a trivial move precedes the flush notification for the
moved SST.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6381
Test Plan: make check
Differential Revision: D19773729
Pulled By: ltamasi
fbshipit-source-id: ae0f273ded061110dd9334e8fb99b0d7786650b0
Summary:
When paranoid_checks is on, DBImpl::CheckConsistency() iterates over all sst files and calls Env::GetFileSize() for each of them. As far as I could understand, this is pretty arbitrary and doesn't affect correctness - if filesystem doesn't corrupt fsynced files, the file sizes will always match; if it does, it may as well corrupt contents as well as sizes, and rocksdb doesn't check contents on open.
If there are thousands of sst files, getting all their sizes takes a while. If, on top of that, Env is overridden to use some remote storage instead of local filesystem, it can be *really* slow and overload the remote storage service. This PR adds an option to not do GetFileSize(); instead it does GetChildren() for parent directory to check that all the expected sst files are at least present, but doesn't check their sizes.
We can't just disable paranoid_checks instead because paranoid_checks do a few other important things: make the DB read-only on write errors, print error messages on read errors, etc.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6353
Test Plan: ran the added sanity check unit test. Will try it out in a LogDevice test cluster where the GetFileSize() calls are causing a lot of trouble.
Differential Revision: D19656425
Pulled By: al13n321
fbshipit-source-id: c2c421b367633033760d1f56747bad206d1fbf82
Summary:
This is a redesign of the API for RocksJava comparators with the aim of improving performance. It also simplifies the class hierarchy.
**NOTE**: This breaks backwards compatibility for existing 3rd party Comparators implemented in Java... so we need to consider carefully which release branches this goes into.
Previously when implementing a comparator in Java the developer had a choice of subclassing either `DirectComparator` or `Comparator` which would use direct and non-direct byte-buffers resepectively (via `DirectSlice` and `Slice`).
In this redesign there we have eliminated the overhead of using the Java Slice classes, and just use `ByteBuffer`s. The `ComparatorOptions` supplied when constructing a Comparator allow you to choose between direct and non-direct byte buffers by setting `useDirect`.
In addition, the `ComparatorOptions` now allow you to choose whether a ByteBuffer is reused over multiple comparator calls, by setting `maxReusedBufferSize > 0`. When buffers are reused, ComparatorOptions provides a choice of mutex type by setting `useAdaptiveMutex`.
---
[JMH benchmarks previously indicated](https://github.com/facebook/rocksdb/pull/6241#issue-356398306) that the difference between C++ and Java for implementing a comparator was ~7x slowdown in Java.
With these changes, when reusing buffers and guarding access to them via mutexes the slowdown is approximately the same. However, these changes offer a new facility to not reuse mutextes, which reduces the slowdown to ~5.5x in Java. We also offer a `thread_local` mechanism for reusing buffers, which reduces slowdown to ~5.2x in Java (closes https://github.com/facebook/rocksdb/pull/4425).
These changes also form a good base for further optimisation work such as further JNI lookup caching, and JNI critical.
---
These numbers were captured without jemalloc. With jemalloc, the performance improves for all tests, and the Java slowdown reduces to between 4.8x and 5.x.
```
ComparatorBenchmarks.put native_bytewise thrpt 25 124483.795 ± 2032.443 ops/s
ComparatorBenchmarks.put native_reverse_bytewise thrpt 25 114414.536 ± 3486.156 ops/s
ComparatorBenchmarks.put java_bytewise_non-direct_reused-64_adaptive-mutex thrpt 25 17228.250 ± 1288.546 ops/s
ComparatorBenchmarks.put java_bytewise_non-direct_reused-64_non-adaptive-mutex thrpt 25 16035.865 ± 1248.099 ops/s
ComparatorBenchmarks.put java_bytewise_non-direct_reused-64_thread-local thrpt 25 21571.500 ± 871.521 ops/s
ComparatorBenchmarks.put java_bytewise_direct_reused-64_adaptive-mutex thrpt 25 23613.773 ± 8465.660 ops/s
ComparatorBenchmarks.put java_bytewise_direct_reused-64_non-adaptive-mutex thrpt 25 16768.172 ± 5618.489 ops/s
ComparatorBenchmarks.put java_bytewise_direct_reused-64_thread-local thrpt 25 23921.164 ± 8734.742 ops/s
ComparatorBenchmarks.put java_bytewise_non-direct_no-reuse thrpt 25 17899.684 ± 839.679 ops/s
ComparatorBenchmarks.put java_bytewise_direct_no-reuse thrpt 25 22148.316 ± 1215.527 ops/s
ComparatorBenchmarks.put java_reverse_bytewise_non-direct_reused-64_adaptive-mutex thrpt 25 11311.126 ± 820.602 ops/s
ComparatorBenchmarks.put java_reverse_bytewise_non-direct_reused-64_non-adaptive-mutex thrpt 25 11421.311 ± 807.210 ops/s
ComparatorBenchmarks.put java_reverse_bytewise_non-direct_reused-64_thread-local thrpt 25 11554.005 ± 960.556 ops/s
ComparatorBenchmarks.put java_reverse_bytewise_direct_reused-64_adaptive-mutex thrpt 25 22960.523 ± 1673.421 ops/s
ComparatorBenchmarks.put java_reverse_bytewise_direct_reused-64_non-adaptive-mutex thrpt 25 18293.317 ± 1434.601 ops/s
ComparatorBenchmarks.put java_reverse_bytewise_direct_reused-64_thread-local thrpt 25 24479.361 ± 2157.306 ops/s
ComparatorBenchmarks.put java_reverse_bytewise_non-direct_no-reuse thrpt 25 7942.286 ± 626.170 ops/s
ComparatorBenchmarks.put java_reverse_bytewise_direct_no-reuse thrpt 25 11781.955 ± 1019.843 ops/s
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6252
Differential Revision: D19331064
Pulled By: pdillinger
fbshipit-source-id: 1f3b794e6a14162b2c3ffb943e8c0e64a0c03738
Summary:
Non-zero recycle_log_file_num is incompatible with kPointInTimeRecovery and kAbsoluteConsistency recovery modes. Currently SanitizeOptions changes the recovery mode to kTolerateCorruptedTailRecords, while to resolve this option conflict it makes more sense to compromise recycle_log_file_num, which is a performance feature, instead of wal_recovery_mode, which is a safety feature.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6351
Differential Revision: D19648931
Pulled By: maysamyabandeh
fbshipit-source-id: dd0bf78349edc007518a00c4d63931fd69294ad7
Summary:
Fix for issue https://github.com/facebook/rocksdb/issues/6316
When an append/sync of the manifest file fails due to an IO error such
as NoSpace, we don't always put the DB in read-only mode. This is true
for flush and compactions, as well as foreground operatons such as column family
add/drop, CompactFiles etc. Subsequent changes to the DB will be
recorded in the same manifest file, which would have a corrupted record
in the middle due to the previous failure. On next DB::Open(), it will
fail to process the full manifest and data will be lost.
To fix this, we reset VersionSet::descriptor_log_ on append/sync
failure, which will force a new manifest file to be written on the next
append.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6331
Test Plan: Add new unit tests in error_handler_test.cc
Differential Revision: D19632951
Pulled By: anand1976
fbshipit-source-id: 68d527cb6e59a94cbbbf9f5a17a7f464381d51e3
Summary:
The patch adds statistics support to the new BlobDB garbage collection implementation;
namely, it adds support for the following (pre-existing) tickers:
`BLOB_DB_GC_NUM_FILES`: the number of blob files obsoleted by the GC logic.
`BLOB_DB_GC_NUM_NEW_FILES`: the number of new blob files generated by the GC logic.
`BLOB_DB_GC_FAILURES`: the number of failed GC passes (where a GC pass is
equivalent to a (sub)compaction).
`BLOB_DB_GC_NUM_KEYS_RELOCATED`: the number of blobs relocated to new blob
files by the GC logic.
`BLOB_DB_GC_BYTES_RELOCATED`: the total size of blobs relocated to new blob files.
The tickers `BLOB_DB_GC_NUM_KEYS_OVERWRITTEN`, `BLOB_DB_GC_NUM_KEYS_EXPIRED`,
`BLOB_DB_GC_BYTES_OVERWRITTEN`, `BLOB_DB_GC_BYTES_EXPIRED`, and
`BLOB_DB_GC_MICROS` are not relevant for the new GC logic, and are thus marked
deprecated.
The patch also adds a couple of log messages that log the number and total size of
blobs encountered and relocated during a GC pass, as well as the number of blob
files created and obsoleted.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6296
Test Plan: Extended unit tests and used the BlobDB mode of `db_bench`.
Differential Revision: D19402513
Pulled By: ltamasi
fbshipit-source-id: d53d2bfbf4928a1db1e9346c67ebb9007b8932ec
Summary:
In WritePrepared there could be gap in sequence numbers. This breaks the trick we use in kPointInTimeRecovery which assume the first seq in the log right after the corrupted log is one larger than the last seq we read from the logs. To let this trick keep working, we add a dummy entry with the expected sequence to the first log right after recovery.
Also in WriteCommitted, if the log right after the corrupted log is empty, since it has no sequence number to let the sequential trick work, it is assumed as unexpected behavior. This is however expected to happen if we close the db after recovering from a corruption and before writing anything new to it. To remedy that, we apply the same technique by writing a dummy entry to the log that is created after the corrupted log.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6313
Differential Revision: D19458291
Pulled By: maysamyabandeh
fbshipit-source-id: 09bc49e574690085df45b034ca863ff315937e2d
Summary:
Add a new option ReadOptions.auto_prefix_mode. When set to true, iterator should return the same result as total order seek, but may choose to do prefix seek internally, based on iterator upper bounds. Also fix two previous bugs when handling prefix extrator changes: (1) reverse iterator should not rely on upper bound to determine prefix. Fix it with skipping prefix check. (2) block-based filter is not handled properly.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6314
Test Plan: (1) add a unit test; (2) add the check to stress test and run see whether it can pass at least one run.
Differential Revision: D19458717
fbshipit-source-id: 51c1bcc5cdd826c2469af201979a39600e779bce
Summary:
Commits related to hash index fix have been reverted in 6.7.fb branch. Update HISTORY.md to keep it in sync.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6337
Differential Revision: D19593717
fbshipit-source-id: 466178dc6205c9e41ccced41bf281a0952bdc2ca
Summary:
https://github.com/facebook/rocksdb/pull/6028 introduces a bug for hash index in SST files. If a table reader is created when total order seek is used, prefix_extractor might be passed into table reader as null. While later when prefix seek is used, the same table reader used, hash index is checked but prefix extractor is null and the program would crash.
Fix the issue by fixing http://github.com/facebook/rocksdb/pull/6028 in the way that prefix_extractor is preserved but ReadOptions.total_order_seek is checked
Also, a null pointer check is added so that a bug like this won't cause segfault in the future.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6328
Test Plan: Add a unit test that would fail without the fix. Stress test that reproduces the crash would pass.
Differential Revision: D19586751
fbshipit-source-id: 8de77690167ddf5a77a01e167cf89430b1bfba42
Summary:
Adjusted history for 6.6.1 and 6.6.2, switched master version to 6.7.0.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6320
Differential Revision: D19499272
Pulled By: gfosco
fbshipit-source-id: 2bafb2456951f231e411e9c03aaa4c044f497684
Summary:
The earlier code used two conflicting definitions for the number of
input records going into a compaction, one based on the
`rocksdb.num.entries` table property and one based on
`CompactionIterationStats`. The first one is correct and in line
with how output records are counted, while the second one incorrectly
ignores input records in various cases when the `CompactionIterator`
advances or reseeks the input iterator (this can happen, amongst other
cases, when dealing with `SingleDelete`s, regular `Delete`s, `Merge`s,
and compaction filters). This can result in the code undercounting the
input records and computing an incorrect value for "records dropped"
during the compaction. The patch fixes this by switching over to the
correct (table property based) input record count for "records dropped".
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6325
Test Plan: Tested using `make check` and `db_bench`.
Differential Revision: D19525491
Pulled By: ltamasi
fbshipit-source-id: 4340b0b2f41546db8e356db70ca02199e48fa636
Summary:
When there is a write stall, the active write group leader calls ```BeginWriteStall()``` to walk the queue of writers and remove any with the ```no_slowdown``` option set. There was a bug in the code which updated the back pointer but not the forward pointer (```link_newer```), corrupting the list and causing some threads to wait forever. This PR fixes it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6322
Test Plan: Add a unit test in db_write_test
Differential Revision: D19538313
Pulled By: anand1976
fbshipit-source-id: 6fbed819e594913f435886606f5d36f74f235c3a
Summary:
https://github.com/facebook/rocksdb/pull/2205 introduced a new
configuration option called `max_background_jobs`, superseding the
earlier options `max_background_flushes` and
`max_background_compactions`. However, unlike
`max_background_compactions`, setting `max_background_jobs` dynamically
through the `SetDBOptions` interface does not adjust the size of the
thread pools (see https://github.com/facebook/rocksdb/issues/6298). The
patch fixes this.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6300
Test Plan: Extended unit test.
Differential Revision: D19430899
Pulled By: ltamasi
fbshipit-source-id: 704006605b3c13c3d1b997ccc0831ee369721074
Summary:
When prefix is enabled the expected behavior when the prefix of the target does not exist is for Seek is to seek to any key larger than target and SeekToPrev to any key less than the target.
Currently. the prefix index (kHashSearch) returns OK status but sets Invalid() to indicate two cases: a prefix of the searched key does not exist, ii) the key is beyond the range of the keys in SST file. The SeekForPrev implementation in BlockBasedTable thus does not have enough information to know when it should set the index key to first (to return a key smaller than target). The patch fixes that by returning NotFound status for cases that the prefix does not exist. SeekForPrev in BlockBasedTable accordingly SeekToFirst instead of SeekToLast on the index iterator.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6297
Test Plan: SeekForPrev of non-exsiting prefix is added to block_test.cc, and a test case is added in db_test2, which fails without the fix.
Differential Revision: D19404695
fbshipit-source-id: cafbbf95f8f60ff9ede9ccc99d25bfa1cf6fcdc3
Summary:
kHashSearch index type is incompatible with index_block_restart_interval larger than 1. The patch asserts that and also resets index_block_restart_interval value if it is incompatible with kHashSearch.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6294
Differential Revision: D19394229
Pulled By: maysamyabandeh
fbshipit-source-id: 8a12712ab25e81094a7f71ecd43f773dd4fb6acd
Summary:
The fractional cascading index is not correctly generated when two files at the same level contains the same smallest or largest user key.
The result would be that it would hit an assertion in debug mode and lower level files might be skipped.
This might cause wrong results when the same user keys are of merge operands and Get() is called using the exact user key. In that case, the lower files would need to further checked.
The fix is to fix the fractional cascading index.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6285
Test Plan: Add a unit test which would cause the assertion which would be fixed.
Differential Revision: D19358426
fbshipit-source-id: 39b2b1558075fd95e99491d462a67f9f2298c48e
Summary:
Look at all compaction input files to compute the oldest ancestor time.
In https://github.com/facebook/rocksdb/issues/5992 we changed how creation_time (aka oldest-ancestor-time) table property of compaction output files is computed from max(creation-time-of-all-compaction-inputs) to min(creation-time-of-all-inputs). This exposed a bug where, during compaction, the creation_time:s of only the L0 compaction inputs were being looked at, and all other input levels were being ignored. This PR fixes the issue.
Some TTL compactions when using Level-Style compactions might not have run due to this bug.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6279
Test Plan: Enhanced the unit tests to validate that the correct time is propagated to the compaction outputs.
Differential Revision: D19337812
Pulled By: sagar0
fbshipit-source-id: edf8a72f11e405e93032ff5f45590816debe0bb4
Summary:
This is a continuation of https://github.com/facebook/rocksdb/pull/5320/files
I open a new mr for these purposes, half a year has past since the old mr is posted so it's almost impossible to fulfill some points below on the old mr, especially 5)
1) add validation modes for optimistic txns
2) modify unittests to test both modes
3) make format
4) refine hash functor
5) push to master
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6240
Differential Revision: D19301296
fbshipit-source-id: 5b5b3cbd39558f43947f7d2dec6cd31a06386edb
Summary:
BlobDB currently only supports using the default column family. The earlier
code enforces this by comparing the `ColumnFamilyHandle` passed to the
`Get`/`Put`/etc. call with the handle returned by `DefaultColumnFamily`
(which, at the end of the day, comes from `DBImpl::default_cf_handle_`).
Since other `ColumnFamilyHandle`s can also point to the default column
family, this can reject legitimate requests as well. (As an example,
with the earlier code, the handle returned by `BlobDB::Open` cannot
actually be used in API calls.) The patch fixes this by comparing only
the IDs of the column family handles instead of the pointers themselves.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6226
Test Plan: `make check`
Differential Revision: D19187461
Pulled By: ltamasi
fbshipit-source-id: 54ce2e12ebb1f07e6d1e70e3b1e0213dfa94bda2
Summary:
The patch makes it possible to set the BlobDB configuration option
`garbage_collection_cutoff` on the command line. In addition, it changes
the `db_bench` code so that the default values of BlobDB related
parameters are taken from the defaults of the actual BlobDB
configuration options (note: this changes the the default of
`blob_db_bytes_per_sync`).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6211
Test Plan: Ran `db_bench` with various values of the new parameter.
Differential Revision: D19166895
Pulled By: ltamasi
fbshipit-source-id: 305ccdf0123b9db032b744715810babdc3e3b7d5
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/6192
Test Plan:
Add a unit test that fails without the fix and passes now
make check
Differential Revision: D19124781
Pulled By: anand1976
fbshipit-source-id: 8c8cb6fa16c3fc23ec011e168561a13f76bbd783
Summary:
The current Env API encompasses both storage/file operations, as well as OS related operations. Most of the APIs return a Status, which does not have enough metadata about an error, such as whether its retry-able or not, scope (i.e fault domain) of the error etc., that may be required in order to properly handle a storage error. The file APIs also do not provide enough control over the IO SLA, such as timeout, prioritization, hinting about placement and redundancy etc.
This PR separates out the file/storage APIs from Env into a new FileSystem class. The APIs are updated to return an IOStatus with metadata about the error, as well as to take an IOOptions structure as input in order to allow more control over the IO.
The user can set both ```options.env``` and ```options.file_system``` to specify that RocksDB should use the former for OS related operations and the latter for storage operations. Internally, a ```CompositeEnvWrapper``` has been introduced that inherits from ```Env``` and redirects individual methods to either an ```Env``` implementation or the ```FileSystem``` as appropriate. When options are sanitized during ```DB::Open```, ```options.env``` is replaced with a newly allocated ```CompositeEnvWrapper``` instance if both env and file_system have been specified. This way, the rest of the RocksDB code can continue to function as before.
This PR also ports PosixEnv to the new API by splitting it into two - PosixEnv and PosixFileSystem. PosixEnv is defined as a sub-class of CompositeEnvWrapper, and threading/time functions are overridden with Posix specific implementations in order to avoid an extra level of indirection.
The ```CompositeEnvWrapper``` translates ```IOStatus``` return code to ```Status```, and sets the severity to ```kSoftError``` if the io_status is retryable. The error handling code in RocksDB can then recover the DB automatically.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5761
Differential Revision: D18868376
Pulled By: anand1976
fbshipit-source-id: 39efe18a162ea746fabac6360ff529baba48486f