Summary: Now we skip to add boundary keys to subcompaction candidates since we see an empty level. This makes subcompaction almost disabled for universal compaction. We should consider all files instead.
Test Plan: Run existing tests.
Reviewers: IslamAbdelRahman, andrewkr, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D55005
Summary:
In some situations the DB will scan all existing files in the DB path and delete the ones that are Obsolete.
If this happen during adding an external sst file. this could cause the file to be deleted while we are adding it.
This diff fix this issue
Test Plan:
unit test to reproduce the bug
existing unit tests
Reviewers: sdong, yhchiang, andrewkr
Reviewed By: andrewkr
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D54627
Summary: Add a DB Property "rocksdb.current_version_number" for users to monitor version changes and stale iterators.
Test Plan: Add a unit test.
Reviewers: andrewkr, yhchiang, kradhakrishnan, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D54927
Summary: After we made manual compaction runnable concurrently with automaticallly compaction, we need to run ComputeCompactionScore() to prepare a coming compaction picking call before the compaction finishes.
Test Plan: Run existing tests.
Reviewers: yhchiang, IslamAbdelRahman, andrewkr, kradhakrishnan, anthony, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D54891
Summary:
Add Iterator::GetProperty(), a way for users to communicate with iterator, and turn Iterator::IsKeyPinned() with it.
As a follow-up, I'll ask a property as the version number attached to the iterator
Test Plan: Rerun existing tests and add a negative test case.
Reviewers: yhchiang, andrewkr, kradhakrishnan, anthony, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D54783
Summary:
Fixed two related race conditions in backup creation.
(1) CreateNewBackup() uses DB::DisableFileDeletions() to prevent table files
from being deleted while it is copying; however, the MANIFEST file could still
rotate during this time. The fix is to stop deleting the old manifest in the
rotation logic. It will be deleted safely later when PurgeObsoleteFiles() runs
(can only happen when file deletions are enabled).
(2) CreateNewBackup() did not account for the CURRENT file being mutable.
This is significant because the files returned by GetLiveFiles() contain a
particular manifest filename, but the manifest to which CURRENT refers can
change at any time. This causes problems when CURRENT changes between the call
to GetLiveFiles() and when it's copied to the backup directory. To workaround this, I
manually forge a CURRENT file referring to the manifest filename returned in
GetLiveFiles().
(2) also applies to the checkpointing code, so let me know if this approach is
good and I'll make the same change there.
Test Plan:
new test for roll manifest during backup creation.
running the test before this change:
$ ./backupable_db_test --gtest_filter=BackupableDBTest.ChangeManifestDuringBackupCreation
...
IO error: /tmp/rocksdbtest-9383/backupable_db/MANIFEST-000001: No such file or directory
running the test after this change:
$ ./backupable_db_test --gtest_filter=BackupableDBTest.ChangeManifestDuringBackupCreation
...
[ RUN ] BackupableDBTest.ChangeManifestDuringBackupCreation
[ OK ] BackupableDBTest.ChangeManifestDuringBackupCreation (2836 ms)
Reviewers: IslamAbdelRahman, anthony, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D54711
Summary:
Based on thread scheduling, DBTestUniversalCompaction.IncreaseUniversalCompactionNumLevels can fail to flush enough files to trigger expected compactions. Fix it by waiting for flush after inserting each key.
There are failrue reported:
db/db_universal_compaction_test.cc:1134: Failure
Expected: (NumTableFilesAtLevel(options.num_levels - 1, 1)) > (0), actual: 0 vs 0
but I can't repro it. Try to fix the bug and see whether it goes away.
Test Plan: Run the test multiple time.
Reviewers: IslamAbdelRahman, anthony, andrewkr, kradhakrishnan, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D54747
Summary: Add a test case in ColumnFamilyTest.ReadDroppedColumnFamily to make sure existing iterator is not impacted by column family dropping.
Test Plan: N/A
Reviewers: igor, yhchiang, anthony, andrewkr, kradhakrishnan, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D54657
Summary: DBImpl::SyncWAL() releases db mutex before calling DBImpl::MarkLogsSynced(), while inside DBImpl::MarkLogsSynced() we assert there is none or one outstanding log file. However, a memtable switch can happen in between and causing two or outstanding logs there, failing the assert. The diff adds a unit test that repros the issue and fix the assert so that the unit test passes.
Test Plan: Run the new tests.
Reviewers: anthony, kolmike, yhchiang, IslamAbdelRahman, kradhakrishnan, andrewkr
Reviewed By: andrewkr
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D54621
Summary:
There was a race condition in the test where the rolling thread
acquired the mutex before the flush thread pinned the logger. Rather than add
more complicated synchronization to fix it, I followed Siying's suggestion to
use SyncPoint in the test code.
Comments in the LoadDependency() invocation explain the reason for each of the
sync points.
Test Plan:
Ran test 1000 times for tsan/asan. Will wait for all sandcastle tests
to finish before committing since this is a tricky test.
Reviewers: IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D54615
Summary:
We started getting two kinds of crashes since we started using `DB::CompactFiles()`:
(1) `CompactFiles()` fails saying something like "/data/logdevice/4440/shard12/012302.sst: No such file or directory", and presumably makes DB read-only,
(2) DB fails to open saying "Corruption: Can't access /267000.sst: IO error: /data/logdevice/4440/shard1/267000.sst: No such file or directory".
AFAICT, both can be explained by background thread deleting compaction output as "obsolete" while it's being written, before it's committed to manifest. If it ends up committed to the manifest, we get (2); if compaction notices the disappearance and fails, we get (1). The internal tasks t10068021 and t10134177 have some details about the investigation that led to this.
Test Plan: `make -j check`; the new test fails to reopen the DB without the fix
Reviewers: yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, sdong
Differential Revision: https://reviews.facebook.net/D54561
Summary:
Previously I just slept until the flush_thread was "probably" ready
since proper synchronization in test cases seemed like overkill. But then tsan
complained about it, so I did the synchronization (mostly) properly now.
Test Plan:
$ COMPILE_WITH_TSAN=1 make -j32 auto_roll_logger_test
$ ./auto_roll_logger_test
Reviewers: anthony, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D54399
Summary:
Introude SstFileManager::SetMaxAllowedSpaceUsage() that can be used to limit the maximum space usage allowed for RocksDB.
When this limit is exceeded WriteImpl() will fail and return Status::Aborted()
Test Plan: unit testing
Reviewers: yhchiang, anthony, andrewkr, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D53763
Summary:
For GetLogFileSize() and Flush(), they previously did not follow the
synchronization pattern for accessing logger_. This meant ResetLogger() could
cause logger_ destruction while the unsynchronized functions were accessing it,
causing a segfault.
Also made the mutex instance variable mutable so we can preserve
GetLogFileSize()'s const-ness.
Test Plan:
new test case, it's quite ugly because both threads need to access
one of the functions with SyncPoints (PosixLogger::Flush()), and also special
handling is needed to prevent the mutex and sync points from conflicting.
Reviewers: kradhakrishnan, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D54237
Summary: Currently write_with_callback_test does not test with WAL syncing enabled. This addresses that.
Test Plan: write_with_callback_test
Reviewers: anthony
Reviewed By: anthony
Subscribers: leveldb, dhruba, hermanlee4
Differential Revision: https://reviews.facebook.net/D54255
Summary: There is an issue in DBImpl::WriteImpl where if an empty writebatch comes in and sync=true then the logs will be marked as being synced yet the sync never actually happens because there is no data in the writebatch. This causes the next incoming batch to hang while waiting for the logs to complete syncing. This fix syncs logs even if the writebatch is empty.
Test Plan: DoubleEmptyBatch unit test in transaction_test.
Reviewers: yoshinorim, hermanlee4, sdong, ngbronson, anthony
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D54057
Summary:
Add a new compaction priority as following:
For every file, we calculate total size of files overalapping with the file in the next level, over the file's size itself. The file with smallest ratio will be picked first.
My "db_bench --fillrandom" shows about 5% less compaction than kOldestSmallestSeqFirst if --hard_pending_compaction_bytes_limit value to keep LSM tree in shape. If not limiting hard_pending_compaction_bytes_limit, improvement is only 1% or 2%.
Test Plan: Add a unit test
Reviewers: andrewkr, kradhakrishnan, anthony, IslamAbdelRahman, yhchiang
Reviewed By: yhchiang
Subscribers: MarkCallaghan, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D54075
Summary:
Add kSstFileTier to ReadTier, which allows Get and MultiGet to
read only directly from SST files and skip mem-tables.
kSstFileTier = 0x2 // data in SST files.
// Note that this ReadTier currently only supports
// Get and MultiGet and does not support iterators.
Test Plan: add new test in db_test.
Reviewers: anthony, IslamAbdelRahman, rven, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: igor, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D53511
Summary: Previous commit introduces a test that is not supported in LITE. Fix it.
Test Plan: Build the test with ROCKSDB_LITE.
Reviewers: kradhakrishnan, IslamAbdelRahman, anthony, yhchiang, andrewkr
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D53901
Summary: If users turn on concurrent insert but the memtable doesn't support it, they might see unexcepted crash. Fix it by explicitly fail.
Test Plan:
Run different setting of stress_test and make sure it fails correctly.
Will add a unit test too.
Reviewers: anthony, kradhakrishnan, IslamAbdelRahman, yhchiang, andrewkr, ngbronson
Reviewed By: ngbronson
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D53895
Summary:
copy from task 8196669:
1) Optimistic transactions do not support batching writes from different threads.
2) Pessimistic transactions do not support batching writes if an expiration time is set.
In these 2 cases, we currently do not do any write batching in DBImpl::WriteImpl() because there is a WriteCallback that could decide at the last minute to abort the write. But we could support batching write operations with callbacks if we make sure to process the callbacks correctly.
To do this, we would first need to modify write_thread.cc to stop preventing writes with callbacks from being batched together. Then we would need to change DBImpl::WriteImpl() to call all WriteCallback's in a batch, only write the batches that succeed, and correctly set the state of each batch's WriteThread::Writer.
Test Plan: Added test WriteWithCallbackTest to write_callback_test.cc which creates multiple client threads and verifies that writes are batched and executed properly.
Reviewers: hermanlee4, anthony, ngbronson
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D52863
Summary: Add a new option to BlockBasedTableOptions that will allow us to change the restart interval for the index block
Test Plan: unit tests
Reviewers: yhchiang, anthony, andrewkr, sdong
Reviewed By: sdong
Subscribers: march, dhruba
Differential Revision: https://reviews.facebook.net/D53721
Summary:
InlineSkipList::InsertConcurrently should invalidate the
sequential-insertion cache prev_[] for all inserts of multi-level nodes,
not just those that increase the height of the skip list. The invariant
for prev_ is that prev_[i] (i > 0) is supposed to be the predecessor of
prev_[0] at level i. Before this diff InsertConcurrently could violate
this constraint when inserting a multi-level node after prev_[i] but
before prev_[0].
This diff also reenables kConcurrentSkipList as db_test's
MultiThreaded/MultiThreadedDBTest.MultiThreaded/29.
Test Plan:
1. unit tests
2. temporarily hack kConcurrentSkipList timing so that it is fast but has a 1.5% failure rate on my dev box (1ms stagger on thread launch, 1s test duration, failure rate baseline over 1000 runs)
3. observe 1000 passes post-fix
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, dhruba
Differential Revision: https://reviews.facebook.net/D53751
Summary:
Before this diff, there were duplicated constants to refer to properties (user-
facing API had strings and InternalStats had an enum). I noticed these were
inconsistent in terms of which constants are provided, names of constants, and
documentation of constants. Overall it seemed annoying/error-prone to maintain
these duplicated constants.
So, this diff gets rid of InternalStats's constants and replaces them with a map
keyed on the user-facing constant. The value in that map contains a function
pointer to get the property value, so we don't need to do string matching while
holding db->mutex_. This approach has a side benefit of making many small
handler functions rather than a giant switch-statement.
Test Plan: db_properties_test passes, running "make commit-prereq -j32"
Reviewers: sdong, yhchiang, kradhakrishnan, IslamAbdelRahman, rven, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D53253
Summary: Disable test that is intermittently failing
Test Plan: unit tests
Reviewers: igor, andrewkr, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D53715
Summary:
Concurrent memtable adds were incorrectly computing
the last sequence number for a write batch group when the
write batches were not solitary. This is the cause of
https://github.com/facebook/mysql-5.6/issues/155
Test Plan:
1. unit tests
2. new unit test
3. parallel db_bench stress tests with batch size of 10 and asserts enabled
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: IslamAbdelRahman, MarkCallaghan, dhruba
Differential Revision: https://reviews.facebook.net/D53595
Summary:
Add unit tests:
(1) insert entries of 8MB key and 3GB value to DB
(2) insert entry of 3GB key and 3GB value into write batch and make sure we can read it.
(3) insert 3 billions of key-value pairs into write batch and make sure we can read it.
Disable them because not all platform can run it.
Test Plan: Run the tests
Reviewers: IslamAbdelRahman, yhchiang, kradhakrishnan, andrewkr, anthony
Reviewed By: anthony
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D53619
Summary:
Following up on D53493, we can still enable the filter-skipping
optimization for last file in L0. It's correct to assume the key will be present
in the last L0 file when we're hit-optimized and L0 is deepest.
The FilePicker encapsulates the state for traversing each level's files, so I
needed to make it expose whether the returned file is last in its level.
Test Plan:
verified below test fails before this patch and passes afterwards.
The change to how the test memtable is populated is needed so file 1 has keys
(0, 30, 60), file 2 has keys (10, 40, 70), etc.
$ ./db_universal_compaction_test --gtest_filter=UniversalCompactionNumLevels/DBTestUniversalCompaction.OptimizeFiltersForHits/*
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D53583
Summary:
Fixed the asan error on column_family_test caused by not disabling
SyncPoint.
Test Plan: column_family_test
Reviewers: anthony, rven, kradhakrishnan, sdong, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D53505
Summary:
If options.base_background_compactions is given, we try to schedule number of compactions not existing this number, only when L0 files increase to certain number, or pending compaction bytes more than certain threshold, we schedule compactions based on options.max_background_compactions.
The watermarks are calculated based on slowdown thresholds.
Test Plan:
Add new test cases in column_family_test.
Adding more unit tests.
Reviewers: IslamAbdelRahman, yhchiang, kradhakrishnan, rven, anthony
Reviewed By: anthony
Subscribers: leveldb, dhruba, yoshinorim
Differential Revision: https://reviews.facebook.net/D53409
Summary: Now slowing down for the last mem table takes priority against some stopping conditions. This is logically confusing. Fix it.
Test Plan: Run all existing tests.
Reviewers: yhchiang, IslamAbdelRahman, kradhakrishnan, andrewkr, anthony
Reviewed By: anthony
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D53529
Summary:
Add a new class SstFileTracker that will be notified whenever a DB add/delete/move and sst file, it will also replace DeleteScheduler
SstFileTracker can be used later to abort writes when we exceed a specific size
Test Plan: unit tests
Reviewers: rven, anthony, yhchiang, sdong
Reviewed By: sdong
Subscribers: igor, lovro, march, dhruba
Differential Revision: https://reviews.facebook.net/D50469
Summary: It's a regression bug caused by e089db40f9. With the change, if options.optimize_filters_for_hits=true and there are only L0 files (like single level universal compaction), we skip all the files in L0, which is more than necessary. Fix it by always trying to query bloom filter for files in level 0.
Test Plan: Add a unit test for it.
Reviewers: anthony, rven, yhchiang, IslamAbdelRahman, kradhakrishnan, andrewkr
Reviewed By: andrewkr
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D53493
Summary: Measuring mutex duration will measure time inside DB mutex, which breaks our best practice. Add a stat level in Statistics class. By default, disable to measure the mutex operations.
Test Plan: Add a unit test to make sure it is off by default.
Reviewers: rven, anthony, IslamAbdelRahman, kradhakrishnan, andrewkr, yhchiang
Reviewed By: yhchiang
Subscribers: MarkCallaghan, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D53367
Summary: Similar to D53385 we need to check InDomain before checking the filter block.
Test Plan: unit tests
Reviewers: yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D53421
Summary:
NewMemEnv() is defined in rocksdb lite but just returns nullptr --
would it be better to just not define it so we can catch issues like this at
compile-time?
Test Plan:
$ make clean && OPT="-DTRAVIS -DROCKSDB_LITE" V=1 make -j32 db_test
$ ./db_test --gtest_filter='DBTest.MemEnvTest'
...
[ PASSED ] 0 tests.
Reviewers: yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D53427
Summary:
compact_files_test enables SyncPoint but never disable it before
the test terminates. As a result, it might cause heap-use-after-free
error when some code path trying to access the static variable of
SyncPoint when it has already gone out of scope after the main thread
dies.
Test Plan:
COMPILE_WITH_ASAN=1 make compact_files_test -j32
./compact_files_test
Reviewers: sdong, anthony, kradhakrishnan, rven, andrewkr, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D53379
Summary:
Right now when we are creating a BlockBasedTable with fill filter block
we add to the filter all the prefixes that are InDomain() based on the prefix_extractor
the problem is that when we read a key from the file, we check the filter block for the prefix whether or not it's InDomain()
Test Plan: unit tests
Reviewers: yhchiang, rven, anthony, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D53385
Summary:
We can avoid the dependency by forward-declaring ColumnFamilyData and
then treating it as a black box. That means callers of ThreadStatusUtil need to
explicitly provide more options, even if they can be derived from the
ColumnFamilyData, since ThreadStatusUtil doesn't include the definition.
This is part of a series of diffs to eliminate circular dependencies between
directories (e.g., db/* files depending on util/* files and vice-versa).
Test Plan:
$ ./db_test --gtest_filter=DBTest.GetThreadStatus
$ make -j32 commit-prereq
Reviewers: sdong, yhchiang, IslamAbdelRahman
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D53361
Summary:
I split the db-specific test points out into a separate file under db/
directory. There were also a few bugs to fix in xfunc.{h,cc} that prevented it
from compiling previously; see https://reviews.facebook.net/D36825.
Test Plan:
compilation works now, below command works, will also run "make xfunc".
$ make check ROCKSDB_XFUNC_TEST='managed_new' tests-regexp='DBTest' -j32
Reviewers: sdong, yhchiang
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D53343
Summary: Break down DBTest.Randomized to multiple gtest tests based on config type
Test Plan: Run the test and all tests. Make sure configurations are correctly set
Reviewers: yhchiang, IslamAbdelRahman, rven, kradhakrishnan, andrewkr, anthony
Reviewed By: anthony
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D53247
Summary: Timing mutex operations can impact scalability of the system. Add a new perf context level that can measure time counters except for mutex.
Test Plan: Add a new unit test case to make sure it is not set.
Reviewers: IslamAbdelRahman, rven, kradhakrishnan, yhchiang, anthony
Reviewed By: anthony
Subscribers: MarkCallaghan, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D53199
Summary: As titled. Also added the kBaseLevel string, which was missing earlier.
Test Plan: built
Reviewers: yhchiang, anthony, rven, kradhakrishnan, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D53271
Summary:
SstFileWriter may create an sst file with no entries
Right now this will fail when being ingested using DB::AddFile() saying that the keys are corrupted
Test Plan: make check
Reviewers: yhchiang, rven, anthony, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D52815
Summary: Improve testing per discussion in D52989
Test Plan: ran test
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D53211
Summary: Revert the functionaility of D7809 (but I'm keeping the logging and test code). We decided it was dangerous to ignore sync failures based on attempting to read the data written. The read does not tell us whether the data was synced.
Test Plan: There was no test for the particular functionaility that was reverted. Keeping the test code from D7809 that tests whether we set the DB to be readonly when paranoid checks are enabled.
Reviewers: rven, yhchiang, kradhakrishnan, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D52989
Summary:
There were just these two properties that didn't have any named
constant.
Test Plan:
build and below test
$ ./db_properties_test --gtest_filter=DBPropertiesTest.NumImmutableMemTable
Reviewers: yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D53103
Summary:
Moved all the tests that verify property correctness into a separate
file. The goal is to reduce compile time and complexity of db_test. I didn't
add parallelism for db_properties_test, even though these tests were
parallelized in db_test, since the file is small enough that it won't matter.
Some of these moves may be controversial since it's hard to say whether the
test is "verifying property correctness," or "using properties to verify
rocksdb's correctness." I'm interested in any opinions.
Test Plan: ran db_properties_test, also waiting on "make commit-prereq -j32"
Reviewers: yhchiang, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D52995
Summary: It is reported that in compress benchmark in db_bench, zlib will cause an OOM. The suggestd fix was to clear the buffer.
Test Plan: Build and run compress benchmark.
Reviewers: IslamAbdelRahman, yhchiang, rven, andrewkr, kradhakrishnan, anthony
Reviewed By: anthony
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D52857
Summary: That line used to dereference `column_family_data`, which is nullptr if we're creating a column family.
Test Plan: `make -j check`
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D52881
Makefile adjust paths for solaris build
Makefile enable _GLIBCXX_USE_C99 so that std::to_string is available
db_compaction_test.cc Initialise a variable to avoid a compilation error
db_impl.cc Include <alloca.h>
db_test.cc Include <alloca.h>
Environment.java recognise solaris envrionment
options_bulder.cc Make log unambiguous
geodb_impl.cc Make log and floor unambiguous
Summary: When L0->L1 is pending, there may be one L1->L2 compaction going on which prevents the L0->L1 compaction from happening. If L1 needs more data to be moved to L2, then we may continue scheduling more L1->L2 compactions. The end result may be that L0->L1 compaction will not happen until L1 size drops to below target size. We can reduce the stalling because of number of L0 files by stopping schedling new L1->L2 compaction when L0's score is higher than L1.
Test Plan: Run all existing tests.
Reviewers: yhchiang, MarkCallaghan, rven, anthony, IslamAbdelRahman, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D52401
Summary: In plain table reader's non-mmap mode, we only keep the most recent read buffer. However, for binary search, it is likely we come back to a location to read. To avoid one pread in such a case, we keep two read buffers. It should cover most of the cases.
Test Plan:
1. run tests
2. check the optimization works through strace when running
./table_reader_bench -mmap_read=false --num_keys2=1 -num_keys1=5000 -table_factory=plain_table --iterator --through_db
Reviewers: anthony, rven, kradhakrishnan, igor, yhchiang, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D51171
Summary:
While running the myrocks regression suite, I found that while
dropping a table soon after inserting rows into it resulted in an
assertion failure in CheckConsistencyForDeletes for not finding
a file which was recently added or moved. Marking the files to be
deleted as being compacted before calling LogAndApplyChange
fixed the assertion failures.
Test Plan: DBCompactionTest.DeleteFileRange
Reviewers: IslamAbdelRahman, anthony, yhchiang, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: dhruba, yoshinorim, leveldb
Differential Revision: https://reviews.facebook.net/D52599
Summary:
This patch addes ColumnFamilyHandle::GetDescriptor(), which allows
developers to obtain the CF options and names of the associated column
family given its handle.
// Returns the up-to-date descriptor used by the current handle. Since it
// returns the up-to-date information, this call might internally locks
// and releases DB mutex to access the up-to-date CF options.
virtual ColumnFamilyDescriptor GetDescriptor() = 0;
Test Plan: augment column_family_test
Reviewers: sdong, yoshinorim, IslamAbdelRahman, rven, kradhakrishnan, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D51543
Summary: DBImpl::GetLatestSequenceForKey() can do memcpy's to load a value that will never be used. This can be optimized by changing all the Get() functions called to optionally not fetch the value (and only fetch the sequencenumber).
Test Plan: optimistic_transaction_test and transaction_test
Reviewers: anthony
Reviewed By: anthony
Subscribers: leveldb, dhruba, hermanlee4
Differential Revision: https://reviews.facebook.net/D52227
Summary: Need to make sure the background task gets scheduled before it goes out of scope.
Test Plan: ran test. Will see if sporadic valgrind failures go away.
Reviewers: kradhakrishnan
Reviewed By: kradhakrishnan
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D52575
Summary: Make sure SleepingTask has bene run before it goes out of scope.
Test Plan: run test
Reviewers: kradhakrishnan
Reviewed By: kradhakrishnan
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D52581
Summary:
1) changes tools/{benchmark,run_flash_bench}.sh to optionally use the write rate limit
2) removes code for --writes_per_second and switches the 'background' write rate limit
to use --benchmark_write_rate_limit
Replaces https://reviews.facebook.net/D49113
Task ID: #9555881
Blame Rev:
Test Plan:
tools/run_flash_bench.sh
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D52485
Summary:
We need to clean the job context if we end up not deleting any
files because no files are in the range specified.
Test Plan: DBCompactionTest.DeleteFileRange
Reviewers: sdong, anthony, yhchiang, kradhakrishnan, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D52467
Summary:
myrocks seems to build rocksdb using
-Wmissing-field-initializers (and treats warnings as errors). This diff
adds that flag to the rocksdb build, and fixes the compilation failures
that result. I have not checked for any other differences in the build
flags for rocksdb build as part of myrocks.
Test Plan: make check
Reviewers: sdong, rven
Reviewed By: rven
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D52443
Summary:
Fix CLANG build error caused by type mismatch. Changed type to
size_t.
Test Plan: Clang build and make check
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D52413
Summary:
This is an initial diff for providing the ability to delete
files which are completely within a given range of keys.
Test Plan: DBCompactionTest.DeleteRange
Reviewers: IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: yoshinorim, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D52293
Summary: After removing two move operations, we can make CLANG 3.7 build pass under GCC 4.8.1.
Test Plan: USE_CLANG=1 ROCKSDB_FBCODE_BUILD_WITH_481=1 make all -j32
Reviewers: yhchiang, IslamAbdelRahman, rven, anthony
Reviewed By: anthony
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D52365
Summary: ColumnFamilyTest.WriteStallSingleColumnFamily and ColumnFamilyTest.WriteStallTwoColumnFamilies didn't clean up test state cleanly, causing memory leak. Fix it.
Test Plan: Run the two tests in valgrind and make sure they now pass.
Reviewers: yhchiang, anthony, rven, kradhakrishnan, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D52347
Summary: Fix some CLANG errors introduced in 7d87f02799
Test Plan: Build with both of CLANG and gcc
Reviewers: rven, yhchiang, kradhakrishnan, anthony, IslamAbdelRahman, ngbronson
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D52329
Summary:
This diff adds support for concurrent adds to the skiplist memtable
implementations. Memory allocation is made thread-safe by the addition of
a spinlock, with small per-core buffers to avoid contention. Concurrent
memtable writes are made via an additional method and don't impose a
performance overhead on the non-concurrent case, so parallelism can be
selected on a per-batch basis.
Write thread synchronization is an increasing bottleneck for higher levels
of concurrency, so this diff adds --enable_write_thread_adaptive_yield
(default off). This feature causes threads joining a write batch
group to spin for a short time (default 100 usec) using sched_yield,
rather than going to sleep on a mutex. If the timing of the yield calls
indicates that another thread has actually run during the yield then
spinning is avoided. This option improves performance for concurrent
situations even without parallel adds, although it has the potential to
increase CPU usage (and the heuristic adaptation is not yet mature).
Parallel writes are not currently compatible with
inplace updates, update callbacks, or delete filtering.
Enable it with --allow_concurrent_memtable_write (and
--enable_write_thread_adaptive_yield). Parallel memtable writes
are performance neutral when there is no actual parallelism, and in
my experiments (SSD server-class Linux and varying contention and key
sizes for fillrandom) they are always a performance win when there is
more than one thread.
Statistics are updated earlier in the write path, dropping the number
of DB mutex acquisitions from 2 to 1 for almost all cases.
This diff was motivated and inspired by Yahoo's cLSM work. It is more
conservative than cLSM: RocksDB's write batch group leader role is
preserved (along with all of the existing flush and write throttling
logic) and concurrent writers are blocked until all memtable insertions
have completed and the sequence number has been advanced, to preserve
linearizability.
My test config is "db_bench -benchmarks=fillrandom -threads=$T
-batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T
-level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999
-disable_auto_compactions --max_write_buffer_number=8
-max_background_flushes=8 --disable_wal --write_buffer_size=160000000
--block_size=16384 --allow_concurrent_memtable_write" on a two-socket
Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1
thread I get ~440Kops/sec. Peak performance for 1 socket (numactl
-N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance
across both sockets happens at 30 threads, and is ~900Kops/sec, although
with fewer threads there is less performance loss when the system has
background work.
Test Plan:
1. concurrent stress tests for InlineSkipList and DynamicBloom
2. make clean; make check
3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench
4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench
5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench
6. make clean; OPT=-DROCKSDB_LITE make check
7. verify no perf regressions when disabled
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba
Differential Revision: https://reviews.facebook.net/D50589
Summary: DBTest.HardLimit fails in appveyor build. Use special mem table to make the test behavior depends less on platform
Test Plan: Run the test with JEMALLOC both on and off.
Reviewers: yhchiang, kradhakrishnan, rven, anthony, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D52317
Summary: DBTest.DelayedWriteRate has sign and unsign comparisons that break Windows build. Fix it.
Test Plan: Build and run the test modified.
Reviewers: IslamAbdelRahman, rven, anthony, yhchiang, kradhakrishnan
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D52311
Summary: We now have a mechanism to further slowdown writes. Double default options.delayed_write_rate to try to keep the default behavior closer to it used to be.
Test Plan: Run all tests.
Reviewers: IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: yhchiang, kradhakrishnan, rven, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D52281
Summary: It's usually hard for users to set a value of options.delayed_write_rate. With this diff, after slowdown condition triggers, we greedily reduce write rate if estimated pending compaction bytes increase. If estimated compaction pending bytes drop, we increase the write rate.
Test Plan:
Add a unit test
Test with db_bench setting:
TEST_TMPDIR=/dev/shm/ ./db_bench --benchmarks=fillrandom -num=10000000 --soft_pending_compaction_bytes_limit=1000000000 --hard_pending_compaction_bytes_limit=3000000000 --delayed_write_rate=100000000
and make sure without the commit, write stop will happen, but with the commit, it will not happen.
Reviewers: igor, anthony, rven, yhchiang, kradhakrishnan, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D52131
Summary:
Missed this in https://reviews.facebook.net/D51633 because I didn't
wait for 'make commit-prereq' to finish
Test Plan: make clean && USE_CLANG=1 make -j32 all
Reviewers: IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D52275
Summary:
When Get() or NewIterator() trigger file loads, skip caching the filter block if
(1) optimize_filters_for_hits is set and (2) the file is on the bottommost
level. Also skip checking filters under the same conditions, which means that
for a preloaded file or a file that was trivially-moved to the bottom level, its
filter block will eventually expire from the cache.
- added parameters/instance variables in various places in order to propagate the config ("skip_filters") from version_set to block_based_table_reader
- in BlockBasedTable::Rep, this optimization prevents filter from being loaded when the file is opened simply by setting filter_policy = nullptr
- in BlockBasedTable::Get/BlockBasedTable::NewIterator, this optimization prevents filter from being used (even if it was loaded already) by setting filter = nullptr
Test Plan:
updated unit test:
$ ./db_test --gtest_filter=DBTest.OptimizeFiltersForHits
will also run 'make check'
Reviewers: sdong, igor, paultuckfield, anthony, rven, kradhakrishnan, IslamAbdelRahman, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D51633
Summary:
Add CompactionReason to CompactionJobInfo
This will allow users to understand why compaction started which will help options tuning
Test Plan:
added new tests
make check -j64
Reviewers: yhchiang, anthony, kradhakrishnan, sdong, rven
Reviewed By: rven
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D51975
Summary:
This patch fixes https://github.com/facebook/mysql-5.6/issues/121
There is a recent change in rocksdb to disable auto compactions on startup: https://reviews.facebook.net/D51147. However, there is a small timing window where a column family needs to be compacted and schedules a compaction, but the scheduled compaction fails when it checks the disable_auto_compactions setting. The expectation is once the application is ready, it will call EnableAutoCompactions() to allow new compactions to go through. However, if the Column family is stalled because L0 is full, and no writes can go through, it is possible the column family may never have a new compaction request get scheduled. EnableAutoCompaction() should probably schedule an new flush and compaction event when it resets disable_auto_compaction.
Using InstallSuperVersionAndScheduleWork, we call SchedulePendingFlush,
SchedulePendingCompaction, as well as MaybeScheduleFlushOrcompaction on all the
column families to avoid the situation above.
This is still a first pass for feedback.
Could also just call SchedePendingFlush and SchedulePendingCompaction directly.
Test Plan:
Run on Asan build
cd _build-5.6-ASan/ && ./mysql-test/mtr --mem --big --testcase-timeout=36000 --suite-timeout=12000 --parallel=16 --suite=rocksdb,rocksdb_rpl,rocksdb_sys_vars --mysqld=--default-storage-engine=rocksdb --mysqld=--skip-innodb --mysqld=--default-tmp-storage-engine=MyISAM --mysqld=--rocksdb rocksdb_rpl.rpl_rocksdb_stress_crash --repeat=1000
Ensure that it no longer hangs during the test.
Reviewers: hermanlee4, yhchiang, anthony
Reviewed By: anthony
Subscribers: leveldb, yhchiang, dhruba
Differential Revision: https://reviews.facebook.net/D51747
Summary: Fix a bug that options.soft_pending_compaction_bytes_limit is not actually set with --soft_pending_compaction_bytes_limit
Test Plan: Run db_bench with this parameter and make sure the parameter is set correctly.
Reviewers: anthony, kradhakrishnan, yhchiang, IslamAbdelRahman, igor, rven
Reviewed By: rven
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D52125
Summary:
When there are waiting manual compactions, we need to signal
them after removing the current manual compaction from the deque.
Test Plan: ColumnFamilytTest.SameCFManualManualCommaction
Reviewers: anthony, IslamAbdelRahman, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: dhruba, yoshinorim
Differential Revision: https://reviews.facebook.net/D52119
Summary: Now if inserting to mem table is much faster than writing to files, there is no mechanism users can rely on to avoid stopping for reaching options.max_write_buffer_number. With the commit, if there are more than four maximum write buffers configured, we slow down to the rate of options.delayed_write_rate while we reach the last one.
Test Plan:
1. Add a new unit test.
2. Run db_bench with
./db_bench --benchmarks=fillrandom --num=10000000 --max_background_flushes=6 --batch_size=32 -max_write_buffer_number=4 --delayed_write_rate=500000 --statistics
based on hard drive and see stopping is avoided with the commit.
Reviewers: yhchiang, IslamAbdelRahman, anthony, rven, kradhakrishnan, igor
Reviewed By: igor
Subscribers: MarkCallaghan, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D52047
Summary:
This patch update the Iterator API to introduce new functions that allow users to keep the Slices returned by key() valid as long as the Iterator is not deleted
ReadOptions::pin_data : If true keep loaded blocks in memory as long as the iterator is not deleted
Iterator::IsKeyPinned() : If true, this mean that the Slice returned by key() is valid as long as the iterator is not deleted
Also add a new option BlockBasedTableOptions::use_delta_encoding to allow users to disable delta_encoding if needed.
Benchmark results (using https://phabricator.fb.com/P20083553)
```
// $ du -h /home/tec/local/normal.4K.Snappy/db10077
// 6.1G /home/tec/local/normal.4K.Snappy/db10077
// $ du -h /home/tec/local/zero.8K.LZ4/db10077
// 6.4G /home/tec/local/zero.8K.LZ4/db10077
// Benchmarks for shard db10077
// _build/opt/rocks/benchmark/rocks_copy_benchmark \
// --normal_db_path="/home/tec/local/normal.4K.Snappy/db10077" \
// --zero_db_path="/home/tec/local/zero.8K.LZ4/db10077"
// First run
// ============================================================================
// rocks/benchmark/RocksCopyBenchmark.cpp relative time/iter iters/s
// ============================================================================
// BM_StringCopy 1.73s 576.97m
// BM_StringPiece 103.74% 1.67s 598.55m
// ============================================================================
// Match rate : 1000000 / 1000000
// Second run
// ============================================================================
// rocks/benchmark/RocksCopyBenchmark.cpp relative time/iter iters/s
// ============================================================================
// BM_StringCopy 611.99ms 1.63
// BM_StringPiece 203.76% 300.35ms 3.33
// ============================================================================
// Match rate : 1000000 / 1000000
```
Test Plan: Unit tests
Reviewers: sdong, igor, anthony, yhchiang, rven
Reviewed By: rven
Subscribers: dhruba, lovro, adsharma
Differential Revision: https://reviews.facebook.net/D48999
Summary:
List of changes:
1) Fix the snprintf() usage in cases where wrong variable was used to determine the output buffer size.
2) Remove unnecessary checks before calling delete operator.
3) Increase code correctness by using size_t type when getting vector's size.
4) Unify the coding style by removing namespace::std usage at the top of the file to confirm to the majority usage.
5) Fix various lint errors pointed out by 'arc lint'.
Test Plan:
Code review and build:
git diff
make clean
make -j 32 commit-prereq
arc lint
Reviewers: kradhakrishnan, sdong, rven, anthony, yhchiang, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D51849
Summary:
This diff provides a framework for doing manual
compactions in parallel with other compactions. We now have a deque of manual compactions. We also pass manual compactions as an argument from RunManualCompactions down to
BackgroundCompactions, so that RunManualCompactions can be reentrant.
Parallelism is controlled by the two routines
ConflictingManualCompaction to allow/disallow new parallel/manual
compactions based on already existing ManualCompactions. In this diff, by default manual compactions still have to run exclusive of other compactions. However, by setting the compaction option, exclusive_manual_compaction to false, it is possible to run other compactions in parallel with a manual compaction. However, we are still restricted to one manual compaction per column family at a time. All of these restrictions will be relaxed in future diffs.
I will be adding more tests later.
Test Plan: Rocksdb regression + new tests + valgrind
Reviewers: igor, anthony, IslamAbdelRahman, kradhakrishnan, yhchiang, sdong
Reviewed By: sdong
Subscribers: yoshinorim, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D47973
Summary:
Currently, transactions can fail even if there is no actual write conflict. This is due to relying on only the memtables to check for write-conflicts. Users have to tune memtable settings to try to avoid this, but it's hard to figure out exactly how to tune these settings.
With this diff, TransactionDB will use both memtables and SST files to determine if there are any write conflicts. This relies on the fact that BlockBasedTable stores sequence numbers for all writes that happen after any open snapshot. Also, D50295 is needed to prevent SingleDelete from disappearing writes (the TODOs in this test code will be fixed once the other diff is approved and merged).
Note that Optimistic transactions will still rely on tuning memtable settings as we do not want to read from SST while on the write thread. Also, memtable settings can still be used to reduce how often TransactionDB needs to read SST files.
Test Plan: unit tests, db bench
Reviewers: rven, yhchiang, kradhakrishnan, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb, yoshinorim
Differential Revision: https://reviews.facebook.net/D50475
Summary: For Transactions, we want to start using the SST files to do write conflict checking. To do this, we need to make sure that compaction never removes all writes if an earlier snapshot exists. So I had to change the way we process SingleDeletes to sometimes leave a SingleDelete behind when we encounter a Put followed by a SingleDelete. See the comments in this diff for a more detailed explanation.
Test Plan: added more unit tests
Reviewers: rven, igor, kradhakrishnan, IslamAbdelRahman, yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D50295
Summary: Deprecate options.soft_rate_limit, which is hard to tune, with options.soft_pending_compaction_bytes_limit, which would trigger the slowdown if estimated pending compaction bytes exceeds the threshold. The hope is to make it more striaght-forward to tune.
Test Plan: Modify DBTest.SoftLimit to cover options.soft_pending_compaction_bytes_limit instead; run all unit tests.
Reviewers: IslamAbdelRahman, yhchiang, rven, kradhakrishnan, igor, anthony
Reviewed By: anthony
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D51117
Summary: Introduce a compaction picking priority that picks files who contains the oldest rows to compact. This is a mode that slightly improves write amplification for random update cases.
Test Plan: Add a unit test and run it in valgrind too.
Reviewers: yhchiang, anthony, IslamAbdelRahman, rven, kradhakrishnan, MarkCallaghan, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D51459
Summary: Now in benchmark "uncompress" in db_bench, we get size from compressed stream for all other compression types except Snappy, where we allocate memory based on parameter. Change it to match to behavior of other compression types.
Test Plan: Run ./db_bench --benchmarks=uncompress with snappy and other compression types.
Reviewers: yhchiang, kradhakrishnan, anthony, IslamAbdelRahman, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D51681
Summary:
This patch fix a race condition in persisting options which will cause a crash when:
* Thread A obtain cf options and start to persist options based on that cf options.
* Thread B kicks in and finish DropColumnFamily and delete cf_handle.
* Thread A wakes up and tries to finish the persisting options and crashes.
Test Plan: Add a test in column_family_test that can reproduce the crash
Reviewers: anthony, IslamAbdelRahman, rven, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D51717
Summary:
D51183 was reverted due to breaking the LITE build.
This diff is the same as D51183 but with a fix for the LITE BUILD(D51693)
Test Plan: run all unit tests
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D51711
Summary:
Fixing a valgrind failure in DBTestUniversalCompaction
in the IncreaseUniversalCompactionNumLevels test. Using
SpecialSkipList with 10 rows per file.
Test Plan: Run valgrind and functional tests.
Reviewers: anthony, yhchiang, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D51705
Summary:
D50475 enables using SST files for transaction write-conflict checking. In order for this to work, we need to make sure not to compact out SingleDeletes when there is an earlier transaction snapshot(D50295). If there is a long-held snapshot, this could reduce the benefit of the SingleDelete optimization.
This diff allows Transactions to mark snapshots as being used for write-conflict checking. Then, during compaction, we will be able to optimize SingleDeletes better in the future.
This diff adds a flag to SnapshotImpl which is used by Transactions. This diff also passes the earliest write-conflict snapshot's sequence number to CompactionIterator. This diff does not actually change Compaction (after this diff is pushed, D50295 will be able to use this information).
Test Plan: no behavior change, ran existing tests
Reviewers: rven, kradhakrishnan, yhchiang, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D51183
Summary: DBTest.DynamicCompactionOptions ocasionally fails during valgrind run. We sent a sleeping task to block compaction thread pool but we don't wait it to run.
Test Plan: Run the test multiple times in an environment which can cause failure.
Reviewers: rven, kradhakrishnan, igor, IslamAbdelRahman, anthony, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D51687
Summary:
This patch fix a race condition in persisting options which will cause a crash when:
* Thread A obtain cf options and start to persist options based on that cf options.
* Thread B kicks in and finish DropColumnFamily and delete cf_handle.
* Thread A wakes up and tries to finish the persisting options and crashes.
Test Plan: Add a test in column_family_test that can reproduce the crash
Reviewers: anthony, IslamAbdelRahman, rven, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D51609
Summary:
Several tests in db_compaction_test are failing with aborts in
valgrind. These are LevelCompactionThirdPath, LevelCompactionPathUse and
CompressLevelCompaction. We now use the SpecialSkipListFactory to make
them more deterministic
Test Plan: valgrind
Reviewers: anthony, yhchiang, kradhakrishnan, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D51663
Summary: After the skip list optimization, ColumnFamilyTest.DifferentWriteBufferSizes can occasionally fail with flush triggering of column family 3. Insert more data to it to make sure flush will trigger.
Test Plan: Run it multiple times with both of jemaloc on and off and see it always passes. (Without thd commit the run with jemalloc fails with chance of about one in two)
Reviewers: rven, yhchiang, IslamAbdelRahman, anthony, kradhakrishnan, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D51645
Summary:
db_universal_compaction_test is still failing because of
UniversalCompactionNumLevels/DBTestUniversalCompaction.UniversalCompactionSecondPathRatio/0
https://travis-ci.org/facebook/rocksdb/jobs/94949919
Use same approach to fix other tests to fix this test
Test Plan: Run ./db_universal_compaction_test on mac and make sure all the tests pass
Reviewers: kradhakrishnan, yhchiang, rven, anthony, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D51591
Summary: Skip list now cannot estimate memory across allocators
consistently and hence triggers flush at different time. This breaks certain
unit tests.
The fix is to adopt key count instead of size for flush.
Test Plan: Ran test on dev box and mac (where it used to fail)
Reviewers: sdong
CC: leveldb@
Task ID: #9273334
Blame Rev:
Summary:
Fixes T8781168.
Added a new function EnableAutoCompactions in db.h to be publicly
avialable. This allows compaction to be re-enabled after disabling it via
SetOptions
Refactored code to set the dbptr earlier on in TransactionDB::Open and DB::Open
Temporarily disable auto_compaction in TransactionDB::Open until dbptr is set to
prevent race condition.
Test Plan:
Ran make all check
verified fix on myrocks side:
was able to reproduce the seg fault with
../tools/mysqltest.sh --mem --force rocksdb.drop_table
method was to manually sleep the thread after DB::Open but before TransactionDB ptr was
assigned in transaction_db_impl.cc:
DB::Open(db_options, dbname, column_families_copy, handles, &db);
clock_t goal = (60000 * 10) + clock();
while (goal > clock());
...dbptr(aka rdb) gets assigned below
verified my changes fixed the issue.
Also added unit test 'ToggleAutoCompaction' in transaction_test.cc
Reviewers: hermanlee4, anthony
Reviewed By: anthony
Subscribers: alex, dhruba
Differential Revision: https://reviews.facebook.net/D51147
Summary: Verifiction condition of DBTest.SuggestCompactRangeTest is too strict. Based on key distribution, we might have more small files in last level. Not check number of files in the last level.
Test Plan: Run DBTest.SuggestCompactRangeTest with both of jemalloc on and off.
Reviewers: rven, IslamAbdelRahman, yhchiang, kradhakrishnan, igor, anthony
Reviewed By: anthony
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D51501
Summary: DBTest.DynamicCompactionOptions sometimes fails the assert but I can't repro it locally. Make it more deterministic and readable and see whether the problem is still there.
Test Plan: Run tht test and make sure it passes
Reviewers: kradhakrishnan, yhchiang, igor, rven, IslamAbdelRahman, anthony
Reviewed By: anthony
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D51309
Summary: DBCompactionTestWithParam.CompactionTrigger fails in non-jemalloc build, after the skip list memtable change. Fix it by making mem table flush trigger by number of entries.
Test Plan: Run the test using both of jemalloc and non-jemalloc build.
Reviewers: anthony, IslamAbdelRahman, rven, kradhakrishnan, igor, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D51471
Summary: With recent commit 33e0c93826, db iterator skips perf context counter internal_key_skipped_count when blindly issuing internal Next(). Now increment the counter by one when issuing this Next()
Test Plan: Run all existing tests
Reviewers: rven, yhchiang, IslamAbdelRahman, kradhakrishnan, igor, anthony
Reviewed By: anthony
Subscribers: yoshinorim, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D51465
Summary: DBTest.SuggestCompactRangeTest fails for the case when jemalloc is disabled, including ASAN and valgrind builds. It is caused by the improvement of skip list, which allocates different size of nodes for a new records. Fix it by using a special mem table that triggers a flush by number of entries. In that way the behavior will be consistent for all allocators.
Test Plan: Run the test with both of DISABLE_JEMALLOC=1 and 0
Reviewers: anthony, rven, yhchiang, kradhakrishnan, igor, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D51423
Summary: When option.db_write_buffer_size is hit, we currently flush all column families. Move to flush the column family with the largest active memt table instead. In this way, we can avoid too many small files in some cases.
Test Plan: Modify test DBTest.SharedWriteBuffer to work with the updated behavior
Reviewers: kradhakrishnan, yhchiang, rven, anthony, IslamAbdelRahman, igor
Reviewed By: igor
Subscribers: march, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D51291
Summary: Now DBIter::Next() always compares with current key with itself first, which is unnecessary if the last key is not a merge key. I made the change and didn't see db_iter_test fails. Want to hear whether people have any idea what I miss.
Test Plan: Run all unit tests
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D48279
Summary:
This diff completes the creation of InlineSkipList<Cmp>, which is like
SkipList<const char*, Cmp> but it always allocates the key contiguously
with the node. This allows us to remove the pointer from the node
to the key. As a result the memory usage of the skip list is reduced
(by 1 to sizeof(void*) bytes depending on the padding required to align
the key storage), cache locality is improved, and we halve the number
of calls to the allocator.
For skip lists whose keys are freshly-allocated const char*,
InlineSkipList is stricly preferrable to SkipList. This diff doesn't
replace SkipList, however, because some of the use cases of SkipList in
RocksDB are either character sequences that are not allocated at the
same time as the skip list node allocation (for example
hash_linklist_rep) or have different key types (for example
write_batch_with_index). Taking advantage of inline allocation for
those cases is left to future work.
The perf win is biggest for small values. For single-threaded CPU-bound
(32M fillrandom operations with no WAL log) with 16 byte keys and 0 byte
values, the db_bench perf goes from ~310k ops/sec to ~410k ops/sec. For
large values the improvement is less pronounced, but seems to be between
5% and 10% on the same configuration.
Test Plan: make check
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D51123
Summary:
This diff is 2/3 in a sequence that introduces a skip list optimized
for a key that is a freshly-allocated const char*. The change is broken
into pieces to make it easier to review. This piece removes the Key
template type, introduces the AllocateKey interface, and changes the
unit test from using uint64_t as the Key type to using pointers to an 8
byte blob.
Test Plan: unit test
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D51285
Summary:
This diff is 1/3 in a sequence that introduces a skip list optimized for
a key that is a freshly-allocated const char*. The diff is broken into
pieces to make it easier to review. This piece only introduces the new
type by copying the existing SkipList, with mechanical naming changes
and reformatting.
Test Plan: new unit test
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D51279
* conversion from 'size_t' to 'type', by add static_cast
Tested:
* by build solution on Windows, Linux locally,
* run tests
* build CI system successful
Summary: DBTest.DynamicLevelCompressionPerLevel2 sometimes fails during valgrind runs. This causes our valgrind tests to fail. Not sure what the best fix is for this test, but hopefully this simple change is sufficient.
Test Plan: run test
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D51111
Summary:
Provide an API for compaction filter to specify that it needs
to be applied even if there are snapshots.
Test Plan: DBTestCompactionFilter.CompactionFilterIgnoreSnapshot
Reviewers: yhchiang, IslamAbdelRahman, sdong, anthony
Reviewed By: anthony
Subscribers: yoshinorim, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D51087
Summary: SpecialEnv::time_elapse_only_sleep_ is not initialized, which might cause some test failures. Fix it.
Test Plan: Run some unit tests. Since tests already broken. Might want to commit it sooner.
Reviewers: IslamAbdelRahman, yhchiang, anthony
Reviewed By: anthony
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D50937
Summary: DBTest.MergeTestTime is a test verifying timing counters. Depending on real time may cause non-determinstic results. Change to fake time to be determinsitic.
Test Plan: Run the test and make sure it passes
Reviewers: yhchiang, anthony, rven, kradhakrishnan, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D50883
Summary:
Travis is now failing because we cannot compile forward_iterator_bench under MAC
https://travis-ci.org/facebook/rocksdb/jobs/91524025
In forward_iterator_bench.cc we are using multiple functions that are not available in MAC like
htobe64
be64toh
Blocking forward_iterator_bench under MAC
Test Plan: compile under mac
Reviewers: rven, yhchiang, anthony, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D50889
Summary:
db_tailing_iter_test was failing on some platforms because of
an incorrect allocation and use. This diff fixes the issue.
Test Plan:
db_tailing_iter_test
Run valgrind for db_tailing_iter_test
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D50835
Summary: Timing counters' upper bounds depend on platform. It frequently fails in valgrind runs. Relax the upper bound.
Test Plan: Run the same valgrind test and make sure it passes.
Reviewers: rven, anthony, kradhakrishnan, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D50829
Summary: Handle multiple calls to DBImpl::PauseBackgroundWork() and DBImpl::ContinueBackgroundWork()
Test Plan: rocksdb.information_schema handles this case.
Reviewers: igor
Reviewed By: igor
Subscribers: hermanlee4, jkedgar, dhruba
Differential Revision: https://reviews.facebook.net/D50781
Summary:
Currently RocksDB may break in lines like this:
for (size_t i = sorted_runs.size() - 1; i >= first_index_after; i--) {
if options.level0_file_num_compaction_trigger=0.
Fix it by not executing the logic of picking compactions if there is no file (sorted_runs.size() = 0). Also internally set options.level0_file_num_compaction_trigger=1 if users give a 0. 0 is a value makes no sense in RocksDB.
Test Plan: Run all tests. Will add a unit test too.
Reviewers: yhchiang, IslamAbdelRahman, anthony, kradhakrishnan, rven
Reviewed By: rven
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D50727
Summary:
Fixed Rocksdb lite build failure in forward_iterator_bench by
defining main for the ROCKSDB_LITE case
Test Plan: build ROCKSDB_LITE
Reviewers: anthony, yhchiang, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D50733
Summary:
Under a tailing workload, there were increased block cache
misses when a memtable was flushed because we were rebuilding iterators
in that case since the version set changed. This was exacerbated in the
case of iterate_upper_bound, since file iterators which were over the
iterate_upper_bound would have been deleted and are now brought back as
part of the Rebuild, only to be deleted again. We now renew the iterators
and only build iterators for files which are added and delete file
iterators for files which are deleted.
Refer to https://reviews.facebook.net/D50463 for previous version
Test Plan: DBTestTailingIterator.TailingIteratorTrimSeekToNext
Reviewers: anthony, IslamAbdelRahman, igor, tnovak, yhchiang, sdong
Reviewed By: sdong
Subscribers: yhchiang, march, dhruba, leveldb, lovro
Differential Revision: https://reviews.facebook.net/D50679
Summary:
Since level 0 files can overlap, two level 0 compactions cannot
run in parallel. Compact files needs to check this before running a
compaction.
Test Plan: CompactFilesTest.L0ConflictsFiles
Reviewers: igor, IslamAbdelRahman, anthony, sdong, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D50079
Summary:
There's no need for WriteImpl to flatten the write batch group
into a single WriteBatch if the WAL is disabled. This diff moves the
flattening into the WAL step, and skips flattening entirely if it isn't
needed. It's good for about 5% speedup on a multi-threaded workload
with no WAL.
This diff also adds clarifying comments about the chance for partial
failure of WriteBatchInternal::InsertInto, and always sets bg_error_ if
the memtable state diverges from the logged state or if a WriteBatch
succeeds only partially.
Benchmark for speedup:
db_bench -benchmarks=fillrandom -threads=16 -batch_size=1 -memtablerep=skip_list -value_size=0 --num=200000 -level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999 -disable_auto_compactions --max_write_buffer_number=8 -max_background_flushes=8 --disable_wal --write_buffer_size=160000000
Test Plan: asserts + make check
Reviewers: sdong, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D50583
Summary:
DBCompactionTest.SkipStatsUpdateTest relies on the number
of files opened during the DB::Open process, but the persisting
options file support altered this number and thus makes
DBCompactionTest.SkipStatsUpdateTest in certain environment.
This patch fixed this test failure.
Test Plan: db_compaction_test
Reviewers: igor, sdong, anthony, IslamAbdelRahman
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D50637
Summary:
This patch allows rocksdb to persist options into a file on
DB::Open, SetOptions, and Create / Drop ColumnFamily.
Options files are created under the same directory as the rocksdb
instance.
In addition, this patch also adds a fail_if_missing_options_file in DBOptions
that makes any function call return non-ok status when it is not able to
persist options properly.
// If true, then DB::Open / CreateColumnFamily / DropColumnFamily
// / SetOptions will fail if options file is not detected or properly
// persisted.
//
// DEFAULT: false
bool fail_if_missing_options_file;
Options file names are formatted as OPTIONS-<number>, and RocksDB
will always keep the latest two options files.
Test Plan:
Add options_file_test.
options_test
column_family_test
Reviewers: igor, IslamAbdelRahman, sdong, anthony
Reviewed By: anthony
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D48285
Summary:
Parallel writes will only be possible for certain combinations of
flags and WriteBatch contents. Traversing the WriteBatch at write time
to check these conditions would be expensive, but it is very cheap to
keep track of when building WriteBatch-es. When loading WriteBatch-es
during recovery, a deferred computation state is used so that the flags
never need to be computed.
Test Plan:
1. add asserts and EXPECT_EQ-s
2. make check
Reviewers: sdong, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D50337
Summary:
Using a TLS random instance for skiplist makes it smaller
(useful for hash_skiplist_rep) and prepares skiplist for concurrent
adds. This diff also modifies the branching factor math to avoid an
unnecessary division.
This diff has the effect of changing the sequence of skip list node
height choices made by tests, so it has the potential to cause unit
test failures for tests that implicitly rely on the exact structure
of the skip list. Tests that try to exactly trigger a compaction are
likely suspects for this problem (these tests have always been brittle to
changes in the skiplist details). I've minimizes this risk by reseeding
the main thread's Random at the beginning of each test, increasing the
universal compaction size_ratio limit from 101% to 105% for some tests,
and verifying that the tests pass many times.
Test Plan: for i in `seq 0 9`; do make check; done
Reviewers: sdong, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D50439
Enable C4307 'operator' : integral constant overflow
Longs and ints on Windows are 32-bit hence the overflow
Enable C4309 'conversion' : truncation of constant value
Enable C4512 'class' : assignment operator could not be generated
Enable C4701 Potentially uninitialized local variable 'name' used
Summary:
When a write batch can't join a batch group due to the total
size of the contained batches, the write controller's GetDelay is passed
a size value that includes the rejected batch.
Test Plan: make check
Reviewers: sdong, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D50343
Summary: Use IterKey to store prefix_start_ so that it doesn't get freed
Test Plan: PrefixTest.PrefixValid
Reviewers: anthony, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D50289
Summary:
MyRocks testing found an issue that while iterating over keys
that are outside the prefix, sometimes wrong results were seen for keys
outside the prefix. We now tighten the range of keys seen with a new
read option called prefix_seen_at_start. This remembers the starting
prefix and then compares it on a Next for equality of prefix. If they
are from a different prefix, it sets valid to false.
Test Plan: PrefixTest.PrefixValid
Reviewers: IslamAbdelRahman, sdong, yhchiang, anthony
Reviewed By: anthony
Subscribers: spetrunia, hermanlee4, yoshinorim, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D50211
Summary:
This patch introduces utilities/memory, which currently includes
GetApproximateMemoryUsageByType that reports different types of
rocksdb memory usage given a list of input DBs.
The API also take care of the case where Cache could be shared
across multiple column families / multiple db instances.
Currently, it reports memory usage of memtable, table-readers
and cache.
Test Plan: utilities/memory/memory_test.cc
Reviewers: igor, anthony, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D49257
Summary:
This patch adds GetAggregatedIntProperty() that returns the aggregated
value from all CFs
Test Plan: Added a test in db_test
Reviewers: igor, sdong, anthony, IslamAbdelRahman, rven
Reviewed By: rven
Subscribers: rven, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D49497
Corrects:
db/memtablerep_bench.cc:135:22: error: ‘FLAGS_env’ defined but not used [-Werror=unused-variable]
static rocksdb::Env* FLAGS_env = rocksdb::Env::Default();
^
cc1plus: all warnings being treated as errors
Makefile:1147: recipe for target 'db/memtablerep_bench.o' failed
Summary:
Update DB::AddFile() restrictions to be
- Key range in loaded table file don't overlap with existing keys or tombstones in DB.
- No other writes happen during AddFile call.
The updated AddFile() will verify that the file key range don't overlap with any keys or tombstones in the DB, and then add the file to L0
Test Plan: unit tests
Reviewers: igor, rven, anthony, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: adsharma, ameyag, dhruba
Differential Revision: https://reviews.facebook.net/D49233
Summary: Currently db_bnech's --compaction_pri default is set to be rocksdb::Options().compaction_style. Change it to rocksdb::Options().compaction_pri. Although, for now both is 0.
Test Plan: Build db_bench
Reviewers: anthony, rven, IslamAbdelRahman, kradhakrishnan, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D49773
