Summary:
The patch adds initial support for reading blobs to the batched `MultiGet` API.
The current implementation simply retrieves the blob values as the blob indexes
are encountered; that is, reads from blob files are currently not batched. (This
will be optimized in a separate phase.) In addition, the patch removes some dead
code related to BlobDB from the batched `MultiGet` implementation, namely the
`is_blob` / `is_blob_index` flags that are passed around in `DBImpl` and `MemTable` /
`MemTableListVersion`. These were never hooked up to anything and wouldn't
work anyways, since a single flag is not sufficient to communicate the "blobness"
of multiple key-values.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7766
Test Plan: `make check`
Reviewed By: jay-zhuang
Differential Revision: D25479290
Pulled By: ltamasi
fbshipit-source-id: 7aba2d290e31876ee592bcf1adfd1018713a8000
Summary:
Currently, when a WAL becomes obsolete after flushing, if VersionSet::WalSet does not contain the WAL, we do not track the WAL obsoletion event in MANIFEST.
But consider this case:
* WAL 10 is synced, a VersionEdit is LogAndApplied to MANIFEST to log this WAL addition event, but the VersionEdit is not applied to WalSet yet since its corresponding ManifestWriter is still pending in the write queue;
* Since the above ManifestWriter is blocking, the LogAndApply will block on a conditional variable and release the db mutex, so another LogAndApply can proceed to enqueue other VersionEdits concurrently;
* Now flush happens, and WAL 10 becomes obsolete, although WalSet does not contain WAL 10 yet, we should call LogAndApply to enqueue a VersionEdit to indicate the obsoletion of WAL 10;
* otherwise, when the queued edit indicating WAL 10 addition is logged to MANIFEST, and DB crashes and reopens, the WAL 10 might have been removed from disk, but it still exists in MANIFEST.
This PR changes the behavior to: always `LogAndApply` any WAL addition or obsoletion event, without considering the order issues caused by concurrency, but when applying the edits to `WalSet`, do not add the WALs if they are already obsolete. In this approach, the logical events of WAL addition and obsoletion are always tracked in MANIFEST, so we can inspect the MANIFEST and know all the previous WAL events, but we choose to ignore certain events due to the concurrency issues such as the case above, or the case in https://github.com/facebook/rocksdb/pull/7725.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7759
Test Plan: make check
Reviewed By: pdillinger
Differential Revision: D25423089
Pulled By: cheng-chang
fbshipit-source-id: 9cb9a7fbc1875bf954f2a42f9b6cfd6d49a7b21c
Summary:
Consider the case:
1. All column families are flushed, so all WALs become obsolete, but no WAL is removed from disk yet because the removal is asynchronous, a VersionEdit is written to MANIFEST indicating that WALs before a certain WAL number are obsolete, let's say this number is 3;
2. `SyncWAL` is called, so all the on-disk WALs are synced, and if track_and_verify_wal_in_manifest=true, the WALs will be tracked in MANIFEST, let's say the WAL numbers are 1 and 2;
3. DB crashes;
4. During DB recovery, when replaying MANIFEST, we first see that WAL with number < 3 are obsolete, then we see that WAL 1 and 2 are synced, so according to current implementation of `WalSet`, the `WalSet` will be recovered to include WAL 1 and 2;
5. WAL 1 and 2 are asynchronously deleted from disk, then the WAL verification algorithm fails with `Corruption: missing WAL`.
The above case is reproduced in a new unit test `DBBasicTestTrackWal::DoNotTrackObsoleteWal`.
The fix is to maintain the upper bound of the obsolete WAL numbers, any WAL with number less than the maintained number is considered to be obsolete, so shouldn't be tracked even if they are later synced. The number is maintained in `WalSet`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7725
Test Plan:
1. a new unit test `DBBasicTestTrackWal::DoNotTrackObsoleteWal` is added.
2. run `make crash_test` on devserver.
Reviewed By: riversand963
Differential Revision: D25238914
Pulled By: cheng-chang
fbshipit-source-id: f5dccd57c3d89f19565ec5731f2d42f06d272b72
Summary:
This change eliminates the need for a lot of the PermitUncheckedError calls on return from ErrorHandler methods. The calls are no longer needed as the status is returned as a reference rather than a copy. Additionally, this means that the originating status (recovery_error_, bg_error_) is not cleared implicitly as a result of calling one of these methods.
For this class, I do not know if the proper behavior should be to call PermitUncheckedError in the destructor or if the checked state should be cleared when the status is cleared. I did tests both ways. Without the code in the destructor, the status will need to be cleared in at least some of the places where it is set to OK. When running tests, I found no instances where this class was destructed with a non-OK, non-checked Status.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7539
Reviewed By: anand1976
Differential Revision: D25340565
Pulled By: pdillinger
fbshipit-source-id: 1730c035c81a475875ea745226112030ec25136c
Summary:
Following https://github.com/facebook/rocksdb/issues/7655 and https://github.com/facebook/rocksdb/issues/7657, this PR adds `full_history_ts_low_` to `ColumnFamilyData`.
`ColumnFamilyData::full_history_ts_low_` will be used to create `FlushJob` and `CompactionJob`.
`ColumnFamilyData::full_history_ts_low` is persisted to the MANIFEST file. An application can only
increase its value. Consider the following case:
>
> The database has a key at ts=950. `full_history_ts_low` is first set to 1000, and then a GC is triggered
> and cleans up all data older than 1000. If the application sets `full_history_ts_low` to 900 afterwards,
> and tries to read at ts=960, the key at 950 is not seen. From the perspective of the read, the result
> is hard to reason. For simplicity, we just do now allow decreasing full_history_ts_low for now.
>
During recovery, the value of `full_history_ts_low` is restored for each column family if applicable. Note that
version edits in the MANIFEST file for the same column family may have `full_history_ts_low` unsorted due
to the potential interleaving of `LogAndApply` calls. Only the max will be used to restore the state of the
column family.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7740
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D25296217
Pulled By: riversand963
fbshipit-source-id: 24acda1df8262cd7cfdc6ce7b0ec56438abe242a
Summary:
The patch adds iterator support to the integrated BlobDB implementation.
Whenever a blob reference is encountered during iteration, the corresponding
blob is retrieved by calling `Version::GetBlob`, assuming the `expose_blob_index`
(formerly `allow_blob`) flag is *not* set. (Note: the flag is set by the old stacked
BlobDB implementation, which has its own blob file handling/blob retrieval logic.)
In addition, `DBIter` now uniformly returns `Status::NotSupported` with the error
message `"BlobDB does not support merge operator."` when encountering a
blob reference while performing a merge (instead of potentially returning a
message that implies the database should be opened using the stacked BlobDB's
`Open`.)
TODO: We can implement support for lazily retrieving the blob value (or in other
words, bypassing the retrieval of blob values based on key) by extending the `Iterator`
API with a new `PrepareValue` method (similarly to `InternalIterator`, which already
supports lazy values).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7731
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D25256293
Pulled By: ltamasi
fbshipit-source-id: c39cd782011495a526cdff99c16f5fca400c4811
Summary:
In current code base, in FlushMemtable, when `(Flush_reason == FlushReason::kErrorRecoveryRetryFlush && (!cfd->mem()->IsEmpty() || !cached_recoverable_state_empty_.load()))`, we assert that cfd->imm()->NumNotFlushed() > 0. However, there are some corner cases that can fail this assert: 1) if there are multiple CFs, some CF has immutable memtable, some CFs don't. In ResumeImpl, all CFs will call FlushMemtable, which will hit the assert. 2) Regular flush is scheduled and running, the resume thread is waiting. New KVs are inserted and SchedulePendingFlush is called. Regular flush will continue call MaybeScheduleFlushAndCompaction until all the immutable memtables are flushed. When regular flush ends and auto resume thread starts to schedule new flushes, cfd->imm()->NumNotFlushed() can be 0.
Remove the assert and added the comments.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7744
Test Plan: make check and pass the stress test
Reviewed By: riversand963
Differential Revision: D25340573
Pulled By: zhichao-cao
fbshipit-source-id: eac357bdace660247c197f01a9ff6857e3c97672
Summary:
When 2 phase commit is enabled, if there are prepared data in a WAL, the WAL should be kept, the minimum log number for such a WAL is written to MANIFEST during flush. In atomic flush, such information is not written to MANIFEST.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7570
Test Plan: Added a new unit test `DBAtomicFlushTest.ManualFlushUnder2PC`, this test fails in atomic flush without this PR, after this PR, it succeeds.
Reviewed By: riversand963
Differential Revision: D24394222
Pulled By: cheng-chang
fbshipit-source-id: 60ce74b21b704804943be40c8de01b41269cf116
Summary:
In the current code base, all the manifest writes with IO error will be set with reason: BackgroundErrorReason::kManifestWrite, which will be mapped to the kHardError if the IO Error is retryable. However, if the system does not use the WAL, all the retryable IO error should be mapped to kSoftError. Create this PR to handle is special case by adding kManifestWriteNoWAL to BackgroundErrorReason.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7693
Test Plan: make check, add new testing cases to error_handler_fs_test
Reviewed By: anand1976
Differential Revision: D25066204
Pulled By: zhichao-cao
fbshipit-source-id: d59553896c2eac3fb37c05238544d2b265379462
Summary:
Add timestamp to the `CompactRange()` and `GetApproximateSizes` range keys if needed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7684
Test Plan: make check
Reviewed By: riversand963
Differential Revision: D25015421
Pulled By: jay-zhuang
fbshipit-source-id: 51ca0756087eb053a3b11801e5c7ce1c6e2d38a9
Summary:
https://github.com/facebook/rocksdb/issues/7340 reports and reproduces an assertion failure caused by a combination of the following:
- atomic flush is disabled.
- a column family can appear multiple times in the flush queue at the same time. This behavior was introduced in release 5.17.
Consequently, it is possible that two flushes race with each other. One bg flush thread flushes all memtables. The other thread calls `FlushMemTableToOutputFile()` afterwards, and hits the assertion error below.
```
assert(cfd->imm()->NumNotFlushed() != 0);
assert(cfd->imm()->IsFlushPending());
```
Fix this by reverting the behavior. In non-atomic-flush case, a column family can appear in the flush queue at most once at the same time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7362
Test Plan:
make check
Also run stress test successfully for 10 times.
```
make crash_test
```
Reviewed By: ajkr
Differential Revision: D25172996
Pulled By: riversand963
fbshipit-source-id: f1559b6366cc609e961e3fc83fae548f1fad08ce
Summary:
An empty WAL won't be backed up by the BackupEngine. So if we track the empty WALs in MANIFEST, then when restoring from a backup, it may report corruption that the empty WAL is missing, which is correct because the WAL is actually in the main DB but not in the backup DB, but missing an empty WAL does not logically break DB consistency.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7697
Test Plan: watch existing tests to pass
Reviewed By: pdillinger
Differential Revision: D25077194
Pulled By: cheng-chang
fbshipit-source-id: 01917b57234b92b6063925f2ee9452c5732bdc03
Summary:
The logic for computing min_log_number_to_keep in atomic flush was incorrect.
For example, when all column families are flushed, the min_log_number_to_keep should be the latest new log. But the incorrect logic calls `PrecomputeMinLogNumberToKeepNon2PC` for each column family, and returns the minimum of them. However, `PrecomputeMinLogNumberToKeepNon2PC(cf)` assumes column families other than `cf` are flushed, but in case all column families are flushed, this assumption is incorrect.
Without this fix, the WAL referenced by the computed min_log_number_to_keep may actually contain no unflushed data, so the WAL might have actually been deleted from disk on recovery, then an incorrect error `Corruption: missing WAL` will be reported.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7660
Test Plan:
run `make crash_test_with_atomic_flush` on devserver
added a unit test in `db_flush_test`
Reviewed By: riversand963
Differential Revision: D24906265
Pulled By: cheng-chang
fbshipit-source-id: 08deda62e71f67f59e3b7925cdd86dd09bd4f430
Summary:
https://github.com/facebook/rocksdb/issues/7556 enables `CompactionIterator` to perform garbage collection during compaction according
to a lower bound (user-defined) timestamp `full_history_ts_low_`.
This PR adds a data member `full_history_ts_low_` of type `std::string` to `FlushJob`, and
`full_history_ts_low_` does not change during flush. `FlushJob` will pass a pointer to this data member
to the `CompactionIterator` used during flush.
Also refactored flush_job_test.cc to re-use some existing code, which is actually the majority of this PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7655
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D24933340
Pulled By: riversand963
fbshipit-source-id: 2e584bfd0cf6e5c295ab1af264e68e9d6a12fca3
Summary:
After replaying the WALs, the memtables are flushed synchronously to L0 instead of being flushed in background. Currently, we only track WAL obsoletion events in the code path of background flush jobs. This PR tracks these events in RecoverLogFiles.
After this change, we can enable `track_and_verify_wal_in_manifest` in `db_stress`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7649
Test Plan: `python tools/db_crashtest.py whitebox`
Reviewed By: riversand963
Differential Revision: D24824501
Pulled By: cheng-chang
fbshipit-source-id: 207129f7b845c50b333680ce6818a68a2fad54b9
Summary:
Consider the following sequence of events:
1. Db flushed an SST with file number N, appended to MANIFEST, and tried to sync the MANIFEST.
2. Syncing MANIFEST failed and db crashed.
3. Db tried to recover with this MANIFEST. In the meantime, no entry about the newly-flushed SST was found in the MANIFEST. Therefore, RocksDB replayed WAL and tried to flush to an SST file reusing the same file number N. This failed because file system does not support overwrite. Then Db deleted this file.
4. Db crashed again.
5. Db tried to recover. When db read the MANIFEST, there was an entry referencing N.sst. This could happen probably because the append in step 1 finally reached the MANIFEST and became visible. Since N.sst had been deleted in step 3, recovery failed.
It is possible that N.sst created in step 1 is valid. Although step 3 would still fail since the MANIFEST was not synced properly in step 1 and 2, deleting N.sst would make it impossible for the db to recover even if the remaining part of MANIFEST was appended and visible after step 5.
After this PR, in step 3, immediately after recovering from MANIFEST, a new MANIFEST is created, then we find that N.sst is not referenced in the MANIFEST, so we delete it, and we'll not reuse N as file number. Then in step 5, since the new MANIFEST does not contain N.sst, the recovery failure situation in step 5 won't happen.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7621
Test Plan:
1. some tests are updated, because these tests assume that new MANIFEST is created after WAL recovery.
2. a new unit test is added in db_basic_test to simulate step 3.
Reviewed By: riversand963
Differential Revision: D24668144
Pulled By: cheng-chang
fbshipit-source-id: 90d7487fbad2bc3714f5ede46ea949895b15ae3b
Summary:
When a WAL is synced, an edit is written to MANIFEST.
After flushing memtables, the obsoleted WALs are piggybacked to MANIFEST while writing the new L0 files to MANIFEST.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7601
Test Plan:
`track_and_verify_wals_in_manifest` is enabled by default for all tests extending `DBBasicTest`, and in db_stress_test.
Unit test `wal_edit_test`, `version_edit_test`, and `version_set_test` are also updated.
Watch all tests to pass.
Reviewed By: ltamasi
Differential Revision: D24553957
Pulled By: cheng-chang
fbshipit-source-id: 66a569ff1bdced38e22900bd240b73113906e040
Summary:
Existing API `VerifyChecksum()` allows application to verify sst files' block checksums.
Since whole file, user-specified checksum is tracked in MANIFEST, we can expose a new
API to verify sst files' file checksums.
```
// Compute table file checksums if applicable and compare with MANIFEST.
// Returns OK if no file has mismatching whole-file checksum.
Status DB::VerifyFileChecksums(const ReadOptions& /*read_options*/);
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7578
Test Plan: make check
Reviewed By: pdillinger
Differential Revision: D24436783
Pulled By: riversand963
fbshipit-source-id: 52b51519b842f2b3c4e3351998a97c86cbec85b3
Summary:
Fixes Issue https://github.com/facebook/rocksdb/issues/7497
When allow_data_in_errors db_options is set, log error key details in `ParseInternalKey()`
Have fixed most of the calls. Have few TODOs still pending - because have to make more deeper changes to pass in the allow_data_in_errors flag. Will do those in a separate PR later.
Tests:
- make check
- some of the existing tests that exercise the "internal key too small" condition are: dbformat_test, cuckoo_table_builder_test
- some of the existing tests that exercise the corrupted key path are: corruption_test, merge_helper_test, compaction_iterator_test
Example of new status returns:
- Key too small - `Corrupted Key: Internal Key too small. Size=5`
- Corrupt key with allow_data_in_errors option set to false: `Corrupted Key: '<redacted>' seq:3, type:3`
- Corrupt key with allow_data_in_errors option set to true: `Corrupted Key: '61' seq:3, type:3`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7515
Reviewed By: ajkr
Differential Revision: D24240264
Pulled By: ramvadiv
fbshipit-source-id: bc48f5d4475ac19d7713e16df37505b31aac42e7
Summary:
This PR does a few things:
1. The MockFileSystem class was split out from the MockEnv. This change would theoretically allow a MockFileSystem to be used by other Environments as well (if we created a means of constructing one). The MockFileSystem implements a FileSystem in its entirety and does not rely on any Wrapper implementation.
2. Make the RocksDB test suite work when MOCK_ENV=1 and ENCRYPTED_ENV=1 are set. To accomplish this, a few things were needed:
- The tests that tried to use the "wrong" environment (Env::Default() instead of env_) were updated
- The MockFileSystem was changed to support the features it was missing or mishandled (such as recursively deleting files in a directory or supporting renaming of a directory).
3. Updated the test framework to have a ROCKSDB_GTEST_SKIP macro. This can be used to flag tests that are skipped. Currently, this defaults to doing nothing (marks the test as SUCCESS) but will mark the tests as SKIPPED when RocksDB is upgraded to a version of gtest that supports this (gtest-1.10).
I have run a full "make check" with MEM_ENV, ENCRYPTED_ENV, both, and neither under both MacOS and RedHat. A few tests were disabled/skipped for the MEM/ENCRYPTED cases. The error_handler_fs_test fails/hangs for MEM_ENV (presumably a timing problem) and I will introduce another PR/issue to track that problem. (I will also push a change to disable those tests soon). There is one more test in DBTest2 that also fails which I need to investigate or skip before this PR is merged.
Theoretically, this PR should also allow the test suite to run against an Env loaded from the registry, though I do not have one to try it with currently.
Finally, once this is accepted, it would be nice if there was a CircleCI job to run these tests on a checkin so this effort does not become stale. I do not know how to do that, so if someone could write that job, it would be appreciated :)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7566
Reviewed By: zhichao-cao
Differential Revision: D24408980
Pulled By: jay-zhuang
fbshipit-source-id: 911b1554a4d0da06fd51feca0c090a4abdcb4a5f
Summary:
Similarly to how https://github.com/facebook/rocksdb/issues/7345
integrated blob file writing into the flush process,
the patch adds support for writing blob files to the compaction logic.
Namely, if `enable_blob_files` is set, large values encountered during
compaction are extracted to blob files and replaced with blob indexes.
The resulting blob files are then logged to the MANIFEST as part of the
compaction job's `VersionEdit` and added to the `Version` alongside any
table files written by the compaction. Any errors during blob file building fail
the compaction job.
There will be a separate follow-up patch to perform blob garbage collection
during compactions.
In addition, the patch continues to chip away at the mess around computing
various compaction related statistics by eliminating some code duplication
and by making the `num_output_files` and `bytes_written` stats more consistent
for flushes, compactions, and recovery.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7573
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D24404696
Pulled By: ltamasi
fbshipit-source-id: 21216af3a172ad3ce8f85d11cd30923784ae426c
Summary:
This PR makes it able to `LogAndApply` `VersionEdit`s related to WALs, and also be able to `Recover` from MANIFEST with WAL related `VersionEdit`s.
The `VersionEdit`s related to WAL are treated similarly as those related to column family operations, they are not applied to versions, but can be in a commit group. Mixing WAL related `VersionEdit`s with other types of edits will make logic in `ProcessManifestWrite` more complicated, so `VersionEdit`s related to WAL can either be WAL additions or deletions, like column family add and drop.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7256
Test Plan: a set of unit tests are added in `version_set_test.cc`
Reviewed By: riversand963
Differential Revision: D23123238
Pulled By: cheng-chang
fbshipit-source-id: 246be2ed4744fd03fa2738aba408aaa611d0379c
Summary:
As suggested by pdillinger ,The name of kLogFile is misleading, in some tests, kLogFile is defined as info log. Replace it with kWalFile and move it to public, which will be used in https://github.com/facebook/rocksdb/issues/7523
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7580
Test Plan: make check
Reviewed By: riversand963
Differential Revision: D24485420
Pulled By: zhichao-cao
fbshipit-source-id: 955e3dacc1021bb590fde93b0a568ffe9ad80799
Summary:
Remove function calling in assert statement as assert is a no
op in opt build and that function might not be called. This causes hang
in closing RocksDB when refit level is set.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7581
Test Plan: make check -j64
Reviewed By: riversand963
Differential Revision: D24466420
Pulled By: akankshamahajan15
fbshipit-source-id: 97db4ec5a95ae693c3290e176a3c12a9b1ad2f6d
Summary:
Make LoadLatestOptions return PathNotFound if the options file does not exist. Added tests for the LoadOptions related methods.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7554
Reviewed By: akankshamahajan15
Differential Revision: D24298985
Pulled By: zhichao-cao
fbshipit-source-id: c9ae3cb12fc4a5bbef07743e1c1300f98a2441b3
Summary:
Added unit tests that have paranoid_check = true that perform range deletions. At the moment, the deleted ranges do not appear to be checked as part of the paranoid checks.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7521
Reviewed By: zhichao-cao
Differential Revision: D24262175
Pulled By: ajkr
fbshipit-source-id: 1035e968f7ab8ccaa7af086b835a4e72c7e56743
Summary:
If `BottommostLevelCompaction.kForce*` is set, compaction should avoid
trivial move and always compact the sst to the target size.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7368
Reviewed By: ajkr
Differential Revision: D23629525
Pulled By: jay-zhuang
fbshipit-source-id: 79f23c79ecb31587e0593b28cce43131107bbcd0
Summary:
`BeginWriteStall()` removes no_slowdown write from the write
list and updates `link_newer`, which makes `CreateMissingNewerLinks()`
thought all write list has valid `link_newer` and failed to create link
for all writers.
It caused flaky test and SegFault for release build.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7508
Test Plan: Add unittest to reproduce the issue.
Reviewed By: anand1976
Differential Revision: D24126601
Pulled By: jay-zhuang
fbshipit-source-id: f8ac5dba653f7ee1b0950296427d4f5f8ee34a06
Summary:
This PR schedules a background thread (shared across all DB instances)
to flush info log every ten seconds. This improves debuggability in case
of RocksDB hanging since it ensures the log messages leading up to the hang
will eventually become visible in the log.
The bulk of this PR is moving monitoring/stats_dump_scheduler* to db/periodic_work_scheduler*
and making the corresponding name changes since now the scheduler handles info
log flushing, not just stats dumping.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7488
Reviewed By: riversand963
Differential Revision: D24065165
Pulled By: ajkr
fbshipit-source-id: 339c47a0ff43b79fdbd055fbd9fefbb6f9d8d3b5
Summary:
Add db_basic_test status check list. Some of the warnings are suppressed. It is possible that some of them are due to real bugs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7452
Test Plan: See CI tests pass.
Reviewed By: zhichao-cao
Differential Revision: D23979764
fbshipit-source-id: 6151570c2a9b931b0fbb3fe939a94b2bd1583cbe
Summary:
Possible fix for a TSAN issue reported in EnableFileDeletions.
disable_delete_obsolete_files_ should only be accessed holding the db
mutex, but for logging it was being accessed outside holding the mutex,
now fixed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7435
Test Plan: existing tests, watch for recurrence
Reviewed By: ltamasi
Differential Revision: D23917578
Pulled By: pdillinger
fbshipit-source-id: 8573025bca3f6fe169b24b87bbfc4ce9667b0482
Summary:
Fix few test cases and add them in ASSERT_STATUS_CHECKED build.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7427
Test Plan:
1. ASSERT_STATUS_CHECKED=1 make -j48 check,
2. travis build for ASSERT_STATUS_CHECKED,
3. Without ASSERT_STATUS_CHECKED: make check -j64, CircleCI build and travis build
Reviewed By: pdillinger
Differential Revision: D23909983
Pulled By: akankshamahajan15
fbshipit-source-id: 42d7e4aea972acb9fcddb7ca73fcb82f93272434
Summary:
Implement a parsing tool io_tracer_parser that takes IO trace file (binary file) with command line argument --io_trace_file and output file with --output_file and dumps the IO trace records in outputfile in human readable form.
Also added unit test cases that generates IO trace records and calls io_tracer_parse to parse those records.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7333
Test Plan:
make check -j64,
Add unit test cases.
Reviewed By: anand1976
Differential Revision: D23772360
Pulled By: akankshamahajan15
fbshipit-source-id: 9c20519c189362e6663352d08863326f3e496271
Summary:
Current implementation holds db mutex while calling
`GetAggregatedIntProperty()`. For property kEstimateTableReadersMem,
this can be expensive, especially if the number of table readers is
high.
We can release and re-acquire db mutex if
property_info.need_out_of_mutex is true.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7412
Test Plan:
make check
COMPILE_WITH_ASAN=1 make check
COMPILE_WITH_TSAN=1 make check
Also test internally on a shadow host. Used bpf to verify the
excessively long db mutex holding no longer exists when applications
call GetApproximateMemoryUsageByType().
Reviewed By: jay-zhuang
Differential Revision: D23794824
Pulled By: riversand963
fbshipit-source-id: 6bc02a59fd25613d343a62cf817467c7122c9721
