Summary:
This test would occasionally fail like this:
WARNING: c:\users\circleci\project\db\db_test.cc(1343): error: Expected:
(dbfull()->TEST_MaxNextLevelOverlappingBytes(handles_[1])) <= (20 * 1048576), actual: 33501540 vs 20971520
And being a super old test, it's not structured in a sound way. And it appears that DBTest2.MaxCompactionBytesTest is a better test of what SparseMerge was intended to test. In fact, SparseMerge fails if I set
options.max_compaction_bytes = options.target_file_size_base * 1000;
Thus, we are removing this negative-value test.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7800
Test Plan: Q.E.D.
Reviewed By: ajkr
Differential Revision: D25693366
Pulled By: pdillinger
fbshipit-source-id: 9da07d4dce0559547fc938b2163a2015e956c548
Summary:
Range Locking - an implementation based on the locktree library
- Add a RangeTreeLockManager and RangeTreeLockTracker which implement
range locking using the locktree library.
- Point locks are handled as locks on single-point ranges.
- Add a unit test: range_locking_test
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7506
Reviewed By: akankshamahajan15
Differential Revision: D25320703
Pulled By: cheng-chang
fbshipit-source-id: f86347384b42ba2b0257d67eca0f45f806b69da7
Summary:
Right now tools/regression_test.sh always builds RocksDB with PORTABLE=1. There isn't a reason for that. Remove it. Users can always specify PORTABLE through envirionement variable.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7806
Test Plan: Run tools/regression_test.sh and see it still builds.
Reviewed By: ajkr
Differential Revision: D25687911
fbshipit-source-id: 1c0b03e5df890babc8b7d8af48b48774d9a4600c
Summary:
`CompactedDB` is a kind of read-only DB, so it shouldn't support `SyncWAL`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7788
Test Plan: watch existing tests to pass.
Reviewed By: akankshamahajan15
Differential Revision: D25661209
Pulled By: cheng-chang
fbshipit-source-id: 9eb2cc3f73736dcc205c8410e5944aa203f002d3
Summary:
We saw DBWALTestWithParam/DBWALTestWithParam.WALTrashCleanupOnOpen sometimes fail with:
db/db_sst_test.cc:575: Failure
Expected: (trash_log_count) >= (1), actual: 0 vs 1
The suspicious is that delete scheduling actually deleted all trash files based on rate, but it is not expected. This can be reproduced if we manually add sleep after DB is closed for serveral seconds. Minimize its chance by setting the delete rate to be lowest possible.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7796
Test Plan: The test doesn't fail with the manual sleeping anymore
Reviewed By: anand1976
Differential Revision: D25675000
fbshipit-source-id: a39fd05e1a83719c41014e48843792e752368e22
Summary:
This disables Linux/amd64 builds in Travis for PRs, and adds a
gcc-10+c++20 build in CircleCI, which should fill out sufficient coverage
vs. what we had in Travis
Fixed a use of std::is_pod, which is deprecated in c++20
Fixed ++ on a volatile in db_repl_stress.cc, with bigger refactoring.
Although ++ on this volatile was probably ok with one thread writer and
one thread reader, the code was still overly complex. There was a
deadcode check for error
`if (replThread.no_read < dataPump.no_records)` which can be proven
never to happen based on the structure of the code. It infinite loops
instead for the case intended to be checked. I just simplified the code
for what should be the same checking power.
Also most configurations seem to be using make parallelism = 2 * vcores,
so fixing / using that.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7791
Test Plan:
CI
and `while ./db_repl_stress; do echo again; done` for a while
Reviewed By: siying
Differential Revision: D25669834
Pulled By: pdillinger
fbshipit-source-id: b2c688053d0b1d52c989903449d3cd27a04130d6
Summary:
So that we can more easily get aggregate live table data such
as total filter, index, and data sizes.
Also adds ldb support for getting properties
Also fixed some missing/inaccurate related comments in db.h
For example:
$ ./ldb --db=testdb get_property rocksdb.aggregated-table-properties
rocksdb.aggregated-table-properties.data_size: 102871
rocksdb.aggregated-table-properties.filter_size: 0
rocksdb.aggregated-table-properties.index_partitions: 0
rocksdb.aggregated-table-properties.index_size: 2232
rocksdb.aggregated-table-properties.num_data_blocks: 100
rocksdb.aggregated-table-properties.num_deletions: 0
rocksdb.aggregated-table-properties.num_entries: 15000
rocksdb.aggregated-table-properties.num_merge_operands: 0
rocksdb.aggregated-table-properties.num_range_deletions: 0
rocksdb.aggregated-table-properties.raw_key_size: 288890
rocksdb.aggregated-table-properties.raw_value_size: 198890
rocksdb.aggregated-table-properties.top_level_index_size: 0
$ ./ldb --db=testdb get_property rocksdb.aggregated-table-properties-at-level1
rocksdb.aggregated-table-properties-at-level1.data_size: 80909
rocksdb.aggregated-table-properties-at-level1.filter_size: 0
rocksdb.aggregated-table-properties-at-level1.index_partitions: 0
rocksdb.aggregated-table-properties-at-level1.index_size: 1787
rocksdb.aggregated-table-properties-at-level1.num_data_blocks: 81
rocksdb.aggregated-table-properties-at-level1.num_deletions: 0
rocksdb.aggregated-table-properties-at-level1.num_entries: 12466
rocksdb.aggregated-table-properties-at-level1.num_merge_operands: 0
rocksdb.aggregated-table-properties-at-level1.num_range_deletions: 0
rocksdb.aggregated-table-properties-at-level1.raw_key_size: 238210
rocksdb.aggregated-table-properties-at-level1.raw_value_size: 163414
rocksdb.aggregated-table-properties-at-level1.top_level_index_size: 0
$
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7779
Test Plan: Added a test to ldb_test.py
Reviewed By: jay-zhuang
Differential Revision: D25653103
Pulled By: pdillinger
fbshipit-source-id: 2905469a08a64dd6b5510cbd7be2e64d3234d6d3
Summary:
In the write path, there is an optimization: when a new WAL is created during SwitchMemtable, we update the internal log number of the empty column families to the new WAL. `FindObsoleteFiles` marks a WAL as obsolete if the WAL's log number is less than `VersionSet::MinLogNumberWithUnflushedData`. After updating the empty column families' internal log number, `VersionSet::MinLogNumberWithUnflushedData` might change, so some WALs might become obsolete to be purged from disk.
For example, consider there are 3 column families: 0, 1, 2:
1. initially, all the column families' log number is 1;
2. write some data to cf0, and flush cf0, but the flush is pending;
3. now a new WAL 2 is created;
4. write data to cf1 and WAL 2, now cf0's log number is 1, cf1's log number is 2, cf2's log number is 2 (because cf1 and cf2 are empty, so their log numbers will be set to the highest log number);
5. now cf0's flush hasn't finished, flush cf1, a new WAL 3 is created, and cf1's flush finishes, now cf0's log number is 1, cf1's log number is 3, cf2's log number is 3, since WAL 1 still contains data for the unflushed cf0, no WAL can be deleted from disk;
6. now cf0's flush finishes, cf0's log number is 2 (because when cf0 was switching memtable, WAL 3 does not exist yet), cf1's log number is 3, cf2's log number is 3, so WAL 1 can be purged from disk now, but WAL 2 still cannot because `MinLogNumberToKeep()` is 2;
7. write data to cf2 and WAL 3, because cf0 is empty, its log number is updated to 3, so now cf0's log number is 3, cf1's log number is 3, cf2's log number is 3;
8. now if the background threads want to purge obsolete files from disk, WAL 2 can be purged because `MinLogNumberToKeep()` is 3. But there are only two flush results written to MANIFEST: the first is for flushing cf1, and the `MinLogNumberToKeep` is 1, the second is for flushing cf0, and the `MinLogNumberToKeep` is 2. So without this PR, if the DB crashes at this point and try to recover, `WalSet` will still expect WAL 2 to exist.
When WAL tracking is enabled, we assume WALs will only become obsolete after a flush result is written to MANIFEST in `MemtableList::TryInstallMemtableFlushResults` (or its atomic flush counterpart). The above situation breaks this assumption.
This PR tracks WAL obsoletion if necessary before updating the empty column families' log numbers.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7781
Test Plan:
watch existing tests and stress tests to pass.
`make -j48 blackbox_crash_test` on devserver
Reviewed By: ltamasi
Differential Revision: D25631695
Pulled By: cheng-chang
fbshipit-source-id: ca7fff967bdb42204b84226063d909893bc0a4ec
Summary:
The behavior of options.ttl has been updated long ago but we didn't update the code comments.
Also update the periodic compaction's comment.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7775
Test Plan: See it can still build through CI.
Reviewed By: ajkr
Differential Revision: D25592015
fbshipit-source-id: b1db18b6787e7048ce6aedcbc3bb44493c9fc49b
Summary:
Primarily this change refactors the optimize_filters_for_memory
code for Bloom filters, based on malloc_usable_size, to also work for
Ribbon filters.
This change also replaces the somewhat slow but general
BuiltinFilterBitsBuilder::ApproximateNumEntries with
implementation-specific versions for Ribbon (new) and Legacy Bloom
(based on a recently deleted version). The reason is to emphasize
speed in ApproximateNumEntries rather than 100% accuracy.
Justification: ApproximateNumEntries (formerly CalculateNumEntry) is
only used by RocksDB for range-partitioned filters, called each time we
start to construct one. (In theory, it should be possible to reuse the
estimate, but the abstractions provided by FilterPolicy don't really
make that workable.) But this is only used as a heuristic estimate for
hitting a desired partitioned filter size because of alignment to data
blocks, which have various numbers of unique keys or prefixes. The two
factors lead us to prioritize reasonable speed over 100% accuracy.
optimize_filters_for_memory adds extra complication, because precisely
calculating num_entries for some allowed number of bytes depends on state
with optimize_filters_for_memory enabled. And the allocator-agnostic
implementation of optimize_filters_for_memory, using malloc_usable_size,
means we would have to actually allocate memory, many times, just to
precisely determine how many entries (keys) could be added and stay below
some size budget, for the current state. (In a draft, I got this
working, and then realized the balance of speed vs. accuracy was all
wrong.)
So related to that, I have made CalculateSpace, an internal-only API
only used for testing, non-authoritative also if
optimize_filters_for_memory is enabled. This simplifies some code.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7774
Test Plan:
unit test updated, and for FilterSize test, range of tested
values is greatly expanded (still super fast)
Also tested `db_bench -benchmarks=fillrandom,stats -bloom_bits=10 -num=1000000 -partition_index_and_filters -format_version=5 [-optimize_filters_for_memory] [-use_ribbon_filter]` with temporary debug output of generated filter sizes.
Bloom+optimize_filters_for_memory:
1 Filter size: 197 (224 in memory)
134 Filter size: 3525 (3584 in memory)
107 Filter size: 4037 (4096 in memory)
Total on disk: 904,506
Total in memory: 918,752
Ribbon+optimize_filters_for_memory:
1 Filter size: 3061 (3072 in memory)
110 Filter size: 3573 (3584 in memory)
58 Filter size: 4085 (4096 in memory)
Total on disk: 633,021 (-30.0%)
Total in memory: 634,880 (-30.9%)
Bloom (no offm):
1 Filter size: 261 (320 in memory)
1 Filter size: 3333 (3584 in memory)
240 Filter size: 3717 (4096 in memory)
Total on disk: 895,674 (-1% on disk vs. +offm; known tolerable overhead of offm)
Total in memory: 986,944 (+7.4% vs. +offm)
Ribbon (no offm):
1 Filter size: 2949 (3072 in memory)
1 Filter size: 3381 (3584 in memory)
167 Filter size: 3701 (4096 in memory)
Total on disk: 624,397 (-30.3% vs. Bloom)
Total in memory: 690,688 (-30.0% vs. Bloom)
Note that optimize_filters_for_memory is even more effective for Ribbon filter than for cache-local Bloom, because it can close the unused memory gap even tighter than Bloom filter, because of 16 byte increments for Ribbon vs. 64 byte increments for Bloom.
Reviewed By: jay-zhuang
Differential Revision: D25592970
Pulled By: pdillinger
fbshipit-source-id: 606fdaa025bb790d7e9c21601e8ea86e10541912
Summary:
Inject the random write error to stress test, it requires set reopen=0 and disable_wal=true.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7653
Test Plan: pass db_stress and python3 db_crashtest.py blackbox
Reviewed By: ajkr
Differential Revision: D25354132
Pulled By: zhichao-cao
fbshipit-source-id: 44721104eecb416e27f65f854912c40e301dd669
Summary:
* Fixes a Java test compilation issue on macOS
* Cleans up CircleCI RocksDBJava build config
* Adds CircleCI for RocksDBJava on MacOS
* Ensures backwards compatibility with older macOS via CircleCI
* Fixes RocksJava static builds ordering
* Adds missing RocksJava static builds to CircleCI for Mac and Linux
* Improves parallelism in RocksJava builds
* Reduces the size of the machines used for RocksJava CircleCI as they don't need to be so large (Saves credits)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7769
Reviewed By: akankshamahajan15
Differential Revision: D25601293
Pulled By: pdillinger
fbshipit-source-id: 0a0bb9906f65438fe143487d78e37e1947364d08
Summary:
When ConcurrentTaskLimiter is enabled and there are too many outstanding compactions, BackgroundCompaction returns Status::Busy(), which shouldn't be treat as compaction failure.
This caused performance issue when outstanding compactions reached the limit.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7739
Reviewed By: cheng-chang
Differential Revision: D25508319
Pulled By: ltamasi
fbshipit-source-id: 3b181b16ada0ca3393cfa3a7412985764e79c719
Summary:
sst file number in corruption error would be very useful for debugging
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7767
Reviewed By: zhichao-cao
Differential Revision: D25485872
Pulled By: jay-zhuang
fbshipit-source-id: 67315b582cedeefbce6676015303ebe5bf6526a3
Summary:
The patch adds initial support for reading blobs to the batched `MultiGet` API.
The current implementation simply retrieves the blob values as the blob indexes
are encountered; that is, reads from blob files are currently not batched. (This
will be optimized in a separate phase.) In addition, the patch removes some dead
code related to BlobDB from the batched `MultiGet` implementation, namely the
`is_blob` / `is_blob_index` flags that are passed around in `DBImpl` and `MemTable` /
`MemTableListVersion`. These were never hooked up to anything and wouldn't
work anyways, since a single flag is not sufficient to communicate the "blobness"
of multiple key-values.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7766
Test Plan: `make check`
Reviewed By: jay-zhuang
Differential Revision: D25479290
Pulled By: ltamasi
fbshipit-source-id: 7aba2d290e31876ee592bcf1adfd1018713a8000
Summary:
Deprecate CalculateNumEntry and replace with
ApproximateNumEntries (better name) using size_t instead of int and
uint32_t, to minimize confusing casts and bad overflow behavior
(possible though probably not realistic). Bloom sizes are now explicitly
capped at max size supported by implementations: just under 4GiB for
fv=5 Bloom, and just under 512MiB for fv<5 Legacy Bloom. This
hardening could help to set up for fuzzing.
Also, since RocksDB only uses this information as an approximation
for trying to hit certain sizes for partitioned filters, it's more important
that the function be reasonably fast than for it to be completely
accurate. It's hard enough to be 100% accurate for Ribbon (currently
reversing CalculateSpace) that adding optimize_filters_for_memory
into the mix is just not worth trying to be 100% accurate for num
entries for bytes.
Also:
- Cleaned up filter_policy.h to remove MSVC warning handling and
potentially unsafe use of exception for "not implemented"
- Correct the number of entries limit beyond which current Ribbon
implementation falls back on Bloom instead.
- Consistently use "num_entries" rather than "num_entry"
- Remove LegacyBloomBitsBuilder::CalculateNumEntry as it's essentially
obsolete from general implementation
BuiltinFilterBitsBuilder::CalculateNumEntries.
- Fix filter_bench to skip some tests that don't make sense when only
one or a small number of filters has been generated.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7726
Test Plan:
expanded existing unit tests for CalculateSpace /
ApproximateNumEntries. Also manually used filter_bench to verify Legacy and
fv=5 Bloom size caps work (much too expensive for unit test). Note that
the actual bits per key is below requested due to space cap.
$ ./filter_bench -impl=0 -bits_per_key=20 -average_keys_per_filter=256000000 -vary_key_count_ratio=0 -m_keys_total_max=256 -allow_bad_fp_rate
...
Total size (MB): 511.992
Bits/key stored: 16.777
...
$ ./filter_bench -impl=2 -bits_per_key=20 -average_keys_per_filter=2000000000 -vary_key_count_ratio=0 -m_keys_total_max=2000
...
Total size (MB): 4096
Bits/key stored: 17.1799
...
$
Reviewed By: jay-zhuang
Differential Revision: D25239800
Pulled By: pdillinger
fbshipit-source-id: f94e6d065efd31e05ec630ae1a82e6400d8390c4
Summary:
Uncommon bug seen by ASAN with
ColumnFamilyTest.LiveIteratorWithDroppedColumnFamily, if the last two
references to a ColumnFamilyData are both SuperVersions (during
InstallSuperVersion). The fix is to use UnrefAndTryDelete even in
SuperVersion::Cleanup but with a parameter to avoid re-entering Cleanup
on the same SuperVersion being cleaned up.
ColumnFamilyData::Unref is considered unsafe so removed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7749
Test Plan: ./column_family_test --gtest_filter=*LiveIter* --gtest_repeat=100
Reviewed By: jay-zhuang
Differential Revision: D25354304
Pulled By: pdillinger
fbshipit-source-id: e78f3a3f67c40013b8432f31d0da8bec55c5321c
Summary:
min_wal_number_to_keep should not be decreasing, if it does not increase, then there is no need to log the WAL obsoletions in MANIFEST since a previous one has been logged.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7765
Test Plan: watch existing tests and stress tests to pass
Reviewed By: pdillinger
Differential Revision: D25462542
Pulled By: cheng-chang
fbshipit-source-id: 0085fcb6edf5cf2b0fc32f9932a7566f508768ff
Summary:
Prefer to use keyword args rather than positional args for Buck rules. This appears to be the only remaining instance for `custom_unittest`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7760
Test Plan: Search for other instances of `custom_unittest` without `name`
Reviewed By: cheng-chang
Differential Revision: D25439887
Pulled By: mzlee
fbshipit-source-id: 518c541a5c01207c7b0c1f7322addf5cc4f09f92
Summary:
Some clients do not close their iterators until after the transaction finishes. To handle this case, we will invalidate any iterators on transaction clear.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7733
Reviewed By: cheng-chang
Differential Revision: D25261158
Pulled By: lth
fbshipit-source-id: b91320f00c54cbe0e6882b794b34f3bb5640dbc0
Summary:
When two phase commit is enabled, `VersionSet::min_log_number_to_keep_2pc` is set during flush.
But when a new MANIFEST is created, the `min_log_number_to_keep_2pc` is not carried over to the new MANIFEST. So if a new MANIFEST is created and then DB is reopened, the `min_log_number_to_keep_2pc` will be lost. This may cause DB recovery errors.
The bug is reproduced in a new unit test in `version_set_test.cc`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7747
Test Plan: The new unit test in `version_set_test.cc` should pass.
Reviewed By: jay-zhuang
Differential Revision: D25350661
Pulled By: cheng-chang
fbshipit-source-id: eee890d5b19f15769069670692e270ae31044ece
Summary:
Ensure that when direct IO is enabled and a compressed block cache is
configured, MultiGet inserts compressed data blocks into the compressed
block cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7756
Test Plan: Add unit test to db_basic_test
Reviewed By: cheng-chang
Differential Revision: D25416240
Pulled By: anand1976
fbshipit-source-id: 75d57526370c9c0a45ff72651f3278dbd8a9086f
Summary:
If WAL tracking was enabled, then disabled during reopen, the previously tracked WALs should be removed from MANIFEST.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7757
Test Plan: a new unit test `DBBasicTest.DisableTrackWal` is added.
Reviewed By: jay-zhuang
Differential Revision: D25410508
Pulled By: cheng-chang
fbshipit-source-id: 9d8d9e665066135930a7c1035bb8c2f68bded6a0
Summary:
Execute randomly generated operations on both a DB and a std::map,
then reopen the DB and make sure that iterating the DB produces the
same key-value pairs as iterating through the std::map.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7762
Test Plan: cd fuzz && make db_map_fuzzer && ./db_map_fuzzer
Reviewed By: pdillinger
Differential Revision: D25437485
Pulled By: cheng-chang
fbshipit-source-id: 3a93f7efd046b194193e45d2ab1ad81565510781
Summary:
Currently, when a WAL becomes obsolete after flushing, if VersionSet::WalSet does not contain the WAL, we do not track the WAL obsoletion event in MANIFEST.
But consider this case:
* WAL 10 is synced, a VersionEdit is LogAndApplied to MANIFEST to log this WAL addition event, but the VersionEdit is not applied to WalSet yet since its corresponding ManifestWriter is still pending in the write queue;
* Since the above ManifestWriter is blocking, the LogAndApply will block on a conditional variable and release the db mutex, so another LogAndApply can proceed to enqueue other VersionEdits concurrently;
* Now flush happens, and WAL 10 becomes obsolete, although WalSet does not contain WAL 10 yet, we should call LogAndApply to enqueue a VersionEdit to indicate the obsoletion of WAL 10;
* otherwise, when the queued edit indicating WAL 10 addition is logged to MANIFEST, and DB crashes and reopens, the WAL 10 might have been removed from disk, but it still exists in MANIFEST.
This PR changes the behavior to: always `LogAndApply` any WAL addition or obsoletion event, without considering the order issues caused by concurrency, but when applying the edits to `WalSet`, do not add the WALs if they are already obsolete. In this approach, the logical events of WAL addition and obsoletion are always tracked in MANIFEST, so we can inspect the MANIFEST and know all the previous WAL events, but we choose to ignore certain events due to the concurrency issues such as the case above, or the case in https://github.com/facebook/rocksdb/pull/7725.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7759
Test Plan: make check
Reviewed By: pdillinger
Differential Revision: D25423089
Pulled By: cheng-chang
fbshipit-source-id: 9cb9a7fbc1875bf954f2a42f9b6cfd6d49a7b21c
Summary:
To be used for implementing Range Locking.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7753
Reviewed By: zhichao-cao
Differential Revision: D25378980
Pulled By: cheng-chang
fbshipit-source-id: 801a9c5cd92a84654ca2586b73e8f69001e89320
Summary:
To build on FreeBSD, arch_ppc_probe needs to be adapted to FreeBSD.
Since FreeBSD uses elf_aux_info as an getauxval equivalent, use it and include necessary headers:
- machine/cpu.h for PPC_FEATURE2_HAS_VEC_CRYPTO,
- sys/auxv.h for elf_aux_info,
- sys/elf_common.h for AT_HWCAP2.
elf_aux_info isn't checked for being available, because it's available since FreeBSD 12.0. rocksdb assumes using Clang on FreeBSD, but powerpc* platforms switch to Clang only since 13.0.
This patch makes rocksdb build on FreeBSD on powerpc64 and powerpc64le platforms.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7732
Reviewed By: ltamasi
Differential Revision: D25399194
Pulled By: pdillinger
fbshipit-source-id: 9c905147d75f98cd2557dd2f86a940b8e6c5afcd
Summary:
Consider the case:
1. All column families are flushed, so all WALs become obsolete, but no WAL is removed from disk yet because the removal is asynchronous, a VersionEdit is written to MANIFEST indicating that WALs before a certain WAL number are obsolete, let's say this number is 3;
2. `SyncWAL` is called, so all the on-disk WALs are synced, and if track_and_verify_wal_in_manifest=true, the WALs will be tracked in MANIFEST, let's say the WAL numbers are 1 and 2;
3. DB crashes;
4. During DB recovery, when replaying MANIFEST, we first see that WAL with number < 3 are obsolete, then we see that WAL 1 and 2 are synced, so according to current implementation of `WalSet`, the `WalSet` will be recovered to include WAL 1 and 2;
5. WAL 1 and 2 are asynchronously deleted from disk, then the WAL verification algorithm fails with `Corruption: missing WAL`.
The above case is reproduced in a new unit test `DBBasicTestTrackWal::DoNotTrackObsoleteWal`.
The fix is to maintain the upper bound of the obsolete WAL numbers, any WAL with number less than the maintained number is considered to be obsolete, so shouldn't be tracked even if they are later synced. The number is maintained in `WalSet`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7725
Test Plan:
1. a new unit test `DBBasicTestTrackWal::DoNotTrackObsoleteWal` is added.
2. run `make crash_test` on devserver.
Reviewed By: riversand963
Differential Revision: D25238914
Pulled By: cheng-chang
fbshipit-source-id: f5dccd57c3d89f19565ec5731f2d42f06d272b72
Summary:
This PR removes a nested loop inside ProcessManifestWrites. The new
implementation has the same behavior as the old code with simpler logic
and lower complexity.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7751
Test Plan:
make check
Run make crash_test on devserver and succeeds 3 times.
Reviewed By: ltamasi
Differential Revision: D25363526
Pulled By: riversand963
fbshipit-source-id: 27e681949dacd7501a752e5e517b9e85b54ccb2e
Summary:
This PR has two commits:
1. Modify the code to allow different Lock Managers (of any kind) to be used. It is implied that a LockManager uses its own custom LockTracker.
2. Add definitions for Range Locking (class Endpoint and GetRangeLock() function.
cheng-chang, is this what you've had in mind (should the PR have both item 1 and item 2?)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7443
Reviewed By: zhichao-cao
Differential Revision: D24123172
Pulled By: cheng-chang
fbshipit-source-id: c6548ad6d4cc3c25f68d13b29147bc6fdf357185
Summary:
This change eliminates the need for a lot of the PermitUncheckedError calls on return from ErrorHandler methods. The calls are no longer needed as the status is returned as a reference rather than a copy. Additionally, this means that the originating status (recovery_error_, bg_error_) is not cleared implicitly as a result of calling one of these methods.
For this class, I do not know if the proper behavior should be to call PermitUncheckedError in the destructor or if the checked state should be cleared when the status is cleared. I did tests both ways. Without the code in the destructor, the status will need to be cleared in at least some of the places where it is set to OK. When running tests, I found no instances where this class was destructed with a non-OK, non-checked Status.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7539
Reviewed By: anand1976
Differential Revision: D25340565
Pulled By: pdillinger
fbshipit-source-id: 1730c035c81a475875ea745226112030ec25136c
Summary:
`googletest` uses exceptions to communicate assertion failures when
`GTEST_THROW_ON_FAILURE` is set, which does not go well with
`std::thread`s, since an exception escaping the top-level function of an
`std::thread` object or an `std::thread` getting destroyed without
having been `join`ed or `detach`ed first results in a call to
`std::terminate`. The patch fixes this by moving the `Status` assertions
of background operations in `ExternalSstFileTest.PickedLevelBug` to the
main thread.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7754
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D25383808
Pulled By: ltamasi
fbshipit-source-id: 32fb2721e5169ec898d218900bc0d83eead45d03
Summary:
This PR adds a fuzzer to the project and infrastructure to integrate Rocksdb with OSS-Fuzz. OSS-Fuzz is a service run by Google that performs continuous fuzzing of important open source projects. The LevelDB project is also in being fuzzed by OSS-Fuzz (https://github.com/google/oss-fuzz/tree/master/projects/leveldb). Essentially, OSS-Fuzz will perform the fuzzing for you and email you bug reports, coverage reports etc. All we need is a set of email addresses that will receive this information.
For cross-referencing, the PR that adds the OSS-Fuzz logic is here: https://github.com/google/oss-fuzz/pull/4642
The `db_fuzzer` of the PR performs stateful fuzzing of Rocksdb by calling a sequence of Rockdb's APIs with random input in each fuzz iteration. Each fuzz iteration, thus, creates a new instance of Rocksdb and operates on this given instance. The goal is to test diverse states of Rocksdb and ensure no state lead to error conditions, e.g. memory corruption vulnerabilities.
The fuzzer is similar (although more complex) to the fuzzer that is currently being used to analyse Leveldb (https://github.com/google/oss-fuzz/blob/master/projects/leveldb/fuzz_db.cc)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7674
Reviewed By: pdillinger
Differential Revision: D25238536
Pulled By: cheng-chang
fbshipit-source-id: 610331c49a77eb68d3b1d7d5ef1b0ce230ac0630
Summary:
Handle misuse of snprintf return value to avoid Out of bound
read/write.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7686
Test Plan: make check -j64
Reviewed By: riversand963
Differential Revision: D25030831
Pulled By: akankshamahajan15
fbshipit-source-id: 1a1d181c067c78b94d720323ae00b79566b57cfa
Summary:
Buck TARGETS files are sometimes parsed with Python, and sometimes with Starlark - this TARGETS file was not Starlark compliant. In Starlark you can't have a top-level if in a TARGETS file, but you can have a ternary `a if b else c`. Therefore I converted TARGETS, and updated the generator for it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7743
Reviewed By: pdillinger
Differential Revision: D25342587
Pulled By: ndmitchell
fbshipit-source-id: 88cbe8632071a45a3ea8675812967614c62c78d1
