Summary:
* Fixes a Java test compilation issue on macOS
* Cleans up CircleCI RocksDBJava build config
* Adds CircleCI for RocksDBJava on MacOS
* Ensures backwards compatibility with older macOS via CircleCI
* Fixes RocksJava static builds ordering
* Adds missing RocksJava static builds to CircleCI for Mac and Linux
* Improves parallelism in RocksJava builds
* Reduces the size of the machines used for RocksJava CircleCI as they don't need to be so large (Saves credits)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7769
Reviewed By: akankshamahajan15
Differential Revision: D25601293
Pulled By: pdillinger
fbshipit-source-id: 0a0bb9906f65438fe143487d78e37e1947364d08
Summary:
Consider the following sequence of events:
1. Db flushed an SST with file number N, appended to MANIFEST, and tried to sync the MANIFEST.
2. Syncing MANIFEST failed and db crashed.
3. Db tried to recover with this MANIFEST. In the meantime, no entry about the newly-flushed SST was found in the MANIFEST. Therefore, RocksDB replayed WAL and tried to flush to an SST file reusing the same file number N. This failed because file system does not support overwrite. Then Db deleted this file.
4. Db crashed again.
5. Db tried to recover. When db read the MANIFEST, there was an entry referencing N.sst. This could happen probably because the append in step 1 finally reached the MANIFEST and became visible. Since N.sst had been deleted in step 3, recovery failed.
It is possible that N.sst created in step 1 is valid. Although step 3 would still fail since the MANIFEST was not synced properly in step 1 and 2, deleting N.sst would make it impossible for the db to recover even if the remaining part of MANIFEST was appended and visible after step 5.
After this PR, in step 3, immediately after recovering from MANIFEST, a new MANIFEST is created, then we find that N.sst is not referenced in the MANIFEST, so we delete it, and we'll not reuse N as file number. Then in step 5, since the new MANIFEST does not contain N.sst, the recovery failure situation in step 5 won't happen.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7621
Test Plan:
1. some tests are updated, because these tests assume that new MANIFEST is created after WAL recovery.
2. a new unit test is added in db_basic_test to simulate step 3.
Reviewed By: riversand963
Differential Revision: D24668144
Pulled By: cheng-chang
fbshipit-source-id: 90d7487fbad2bc3714f5ede46ea949895b15ae3b
Summary:
The original test nests a lot of `try` blocks. This PR flattens these blocks into independent blocks, so that each `try` block closes the DB before opening the next DB instance.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7608
Test Plan: watch the existing java tests to pass
Reviewed By: zhichao-cao
Differential Revision: D24611621
Pulled By: cheng-chang
fbshipit-source-id: d486c5d37ac25d4b860d739ef2cdd58e6064d42d
Summary:
Fixes Issue https://github.com/facebook/rocksdb/issues/7497
When allow_data_in_errors db_options is set, log error key details in `ParseInternalKey()`
Have fixed most of the calls. Have few TODOs still pending - because have to make more deeper changes to pass in the allow_data_in_errors flag. Will do those in a separate PR later.
Tests:
- make check
- some of the existing tests that exercise the "internal key too small" condition are: dbformat_test, cuckoo_table_builder_test
- some of the existing tests that exercise the corrupted key path are: corruption_test, merge_helper_test, compaction_iterator_test
Example of new status returns:
- Key too small - `Corrupted Key: Internal Key too small. Size=5`
- Corrupt key with allow_data_in_errors option set to false: `Corrupted Key: '<redacted>' seq:3, type:3`
- Corrupt key with allow_data_in_errors option set to true: `Corrupted Key: '61' seq:3, type:3`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7515
Reviewed By: ajkr
Differential Revision: D24240264
Pulled By: ramvadiv
fbshipit-source-id: bc48f5d4475ac19d7713e16df37505b31aac42e7
Summary:
- Takes the burden off developer to close ColumnFamilyHandle instances before closing RocksDB instance
- The change is backward-compatible
----
Previously the pattern for working with Column Families was:
```java
try (final ColumnFamilyOptions cfOpts = new ColumnFamilyOptions().optimizeUniversalStyleCompaction()) {
// list of column family descriptors, first entry must always be default column family
final List<ColumnFamilyDescriptor> cfDescriptors = Arrays.asList(
new ColumnFamilyDescriptor(RocksDB.DEFAULT_COLUMN_FAMILY, cfOpts),
new ColumnFamilyDescriptor("my-first-columnfamily".getBytes(), cfOpts)
);
// a list which will hold the handles for the column families once the db is opened
final List<ColumnFamilyHandle> columnFamilyHandleList =
new ArrayList<>();
try (final DBOptions options = new DBOptions()
.setCreateIfMissing(true)
.setCreateMissingColumnFamilies(true);
final RocksDB db = RocksDB.open(options,
"path/to/do", cfDescriptors,
columnFamilyHandleList)) {
try {
// do something
} finally {
// NOTE user must explicitly frees the column family handles before freeing the db
for (final ColumnFamilyHandle columnFamilyHandle :
columnFamilyHandleList) {
columnFamilyHandle.close();
}
} // frees the column family options
}
} // frees the db and the db options
```
With the changes in this PR, the Java user no longer has to worry about manually closing the Column Families, which allows them to write simpler symmetrical create/free oriented code like this:
```java
try (final ColumnFamilyOptions cfOpts = new ColumnFamilyOptions().optimizeUniversalStyleCompaction()) {
// list of column family descriptors, first entry must always be default column family
final List<ColumnFamilyDescriptor> cfDescriptors = Arrays.asList(
new ColumnFamilyDescriptor(RocksDB.DEFAULT_COLUMN_FAMILY, cfOpts),
new ColumnFamilyDescriptor("my-first-columnfamily".getBytes(), cfOpts)
);
// a list which will hold the handles for the column families once the db is opened
final List<ColumnFamilyHandle> columnFamilyHandleList =
new ArrayList<>();
try (final DBOptions options = new DBOptions()
.setCreateIfMissing(true)
.setCreateMissingColumnFamilies(true);
final RocksDB db = RocksDB.open(options,
"path/to/do", cfDescriptors,
columnFamilyHandleList)) {
// do something
} // frees the column family options, then frees the db and the db options
}
}
```
**NOTE**: The changes in this PR are backwards API compatible, which means existing code using the original approach will also continue to function correctly.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7428
Reviewed By: cheng-chang
Differential Revision: D24063348
Pulled By: jay-zhuang
fbshipit-source-id: 648d7526669923128c863ead94516bf4d50ac658
Summary:
Allows adding event listeners in RocksJava.
* Adds listeners getter and setter in `Options` and `DBOptions` classes.
* Adds `EventListener` Java interface and base class for implementing custom event listener callbacks - `AbstractEventListener`, which has an underlying native callback class implementing C++ `EventListener` class.
* `AbstractEventListener` class has mechanism for selectively enabling its callback methods in order to prevent invoking Java method if it is not implemented. This decreases performance cost in case only subset of event listener callback methods is needed - the JNI code for remaining "no-op" callbacks is not executed.
* The code is covered by unit tests in `EventListenerTest.java`, there are also tests added for setting/getting listeners field in `OptionsTest.java` and `DBOptionsTest.java`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7425
Reviewed By: pdillinger
Differential Revision: D24063390
Pulled By: jay-zhuang
fbshipit-source-id: 508c359538983d6b765e70d9989c351794a944ee
Summary:
Add following stats for MultiGet in Histogram to get more insight on MultiGet.
1. Number of index and filter blocks read from file as part of MultiGet
request per level.
2. Number of data blocks read from file per level.
3. Number of SST files loaded from file system per level.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7366
Reviewed By: anand1976
Differential Revision: D24127040
Pulled By: akankshamahajan15
fbshipit-source-id: e63a003056b833729b277edc0639c08fb432756b
Summary:
as title
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7347
Test Plan: unit tests included
Reviewed By: jay-zhuang
Differential Revision: D23592552
Pulled By: pdillinger
fbshipit-source-id: 1c3571b6f42bfd0cfd723ff49d01fbc02a1be45b
Summary:
Previously RocksJava limited the format_version to 4. However, the C++ API is now at 5, and this will likely increase again in future. The Java API now allows any positive integer, and an exception is raised from JNI if the format_version is out-of-bounds.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7242
Reviewed By: cheng-chang
Differential Revision: D23077941
Pulled By: pdillinger
fbshipit-source-id: ee69f7203448acddc41c6d86b470ed987d3d366d
Summary:
The PR fixes a Java test for Merge operator `uint64add`.
The current implementation uses wrong byte order for long serialization, but fails to catch this error because the merge sum is lower than `256`.
The PR makes this test case more representative (i.e. it fails with wrong byte order) and changes the byte order to little endian.
Some background: RocksDB uses LittleEndian byte order for integer serialization across all platforms. `MergeTest` uses `ByteBuffer` that defaults to BigEndian byte order.
This test case might probably be used as a sample of `MergeOperator` usage in Java.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7243
Reviewed By: ajkr
Differential Revision: D23079593
Pulled By: pdillinger
fbshipit-source-id: 82e8e166901d66733e96a0116f88d0ec4761ddf1
Summary:
Improvements to the RocksJava release process:
* Generates the Maven artifact version number as part of the release step
* Also generates appropriate checksum files to speed the deploy and publish step
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7219
Reviewed By: ltamasi
Differential Revision: D22983481
Pulled By: pdillinger
fbshipit-source-id: 7b8ffaf46471cd3cda181eb830c962b317d2e688
Summary:
Adds compaction statistics (total bytes read and written) for compactions that occur for delete-triggered, periodic, and TTL compaction reasons.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7165
Test Plan:
TTL and periodic can be checked by runnning db_bench with the options activated:
/db_bench --benchmarks="fillrandom,stats" --statistics --num=10000000 -base_background_compactions=16 -periodic_compaction_seconds=1
./db_bench --benchmarks="fillrandom,stats" --statistics --num=10000000 -base_background_compactions=16 -fifo_compaction_ttl=1
Setting the time to one second causes non-zero bytes read/written for those compaction reasons. Disabling them or setting them to times longer than the test run length causes the stats to return to zero as expected.
Delete-triggered compaction counting is tested in DBTablePropertiesTest.DeletionTriggeredCompactionMarking
Reviewed By: ajkr
Differential Revision: D22693050
Pulled By: akabcenell
fbshipit-source-id: d15cef4d94576f703015c8942d5f0d492f69401d
Summary:
SST Partitioner interface that allows to split SST files during compactions.
It basically instruct compaction to create a new file when needed. When one is using well defined prefixes and prefixed way of defining tables it is good to define also partitioning so that promotion of some SST file does not cover huge key space on next level (worst case complete space).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6957
Reviewed By: ajkr
Differential Revision: D22461239
fbshipit-source-id: 9ce07bba08b3ba89c2d45630520368f704d1316e
Summary:
The methods in convenience.h are used to compare/convert objects to/from strings. There is a mishmash of parameters in use here with more needed in the future. This PR replaces those parameters with a single structure.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6389
Reviewed By: siying
Differential Revision: D21163707
Pulled By: zhichao-cao
fbshipit-source-id: f807b4cc7e2b0af3871536b69546b2604dfa81bd
Summary:
This PR exposes the `Iterator::Refresh` method to the Java API by adding it on the `RocksIteratorInterface` interface. There are three concrete implementations: `RocksIterator`, `SstFileReaderIterator`, and `WBWIRocksIterator`. For the first two cases, the JNI side simply delegates to the underlying `Iterator::Refresh` method; in the last case, as it doesn't share an ancestor, and per the discussion in https://github.com/facebook/rocksdb/issues/3465, a `Status::NotSupported` exception is thrown.
As the last PR had no activity in a while, I'm opening a new one - I'm completely fine with merging the previous PR if it gets completed before this is reviewed.
Let me know if there's anything missing or anything else I can do 👍
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6573
Reviewed By: cheng-chang
Differential Revision: D20604666
Pulled By: pdillinger
fbshipit-source-id: 4de17df1180c3b87b76cfdd77b674b81fc0563f7
Summary:
This change is fixing a crash happening in getApproximateSizes JNI implementation. It also reenables Java test that was crashing most likelly because if this bug.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6652
Reviewed By: cheng-chang
Differential Revision: D20874865
Pulled By: pdillinger
fbshipit-source-id: da95516f15e5df2efe1a4e5690a2ce172cb53f87
Summary:
Adding a Java API for rocksdb::CancelAllBackgroundWork() so that the user can call this (when required) before closing the DB. This is to **prevent the crashes when manual compaction is running and the user decides to close the DB**.
Calling CancelAllBackgroundWork() seems to be the recommended way to make sure that it's safe to close the DB (according to RocksDB FAQ: https://github.com/facebook/rocksdb/wiki/RocksDB-FAQ#basic-readwrite).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6657
Reviewed By: cheng-chang
Differential Revision: D20896395
Pulled By: pdillinger
fbshipit-source-id: 8a8208c10093db09bd35db9af362211897870d96
Summary:
After we had a lot of failures with maven.org downloads, we
wanted an alternative location for downloading binary dependencies.
Hosting them through github would have been good in terms of
organizational and network dependencies, but that approach seems to be
awkward (fake releases, so would need a 'rocksdb-deps' repo) and
strangely complicated for Facebook policy on open source repositories.
This commit moves the downloads (that are not officially hosted by
others on github) from my personal rocksdb fork to an S3 bucket owned
by the Facebook RocksDB AWS account. Facebook employees can access
this through an internal tool, and we should be able to grant permission
to outside collaborators.
Assuming this works out, I will back-port to older branches to stabilize
their CI testing as well.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6526
Test Plan: CI
Differential Revision: D20430130
Pulled By: pdillinger
fbshipit-source-id: df52394a65e0a57942db3039bdaade8a4d520cb2
Summary:
In the `.travis.yml` file the `jdk: openjdk7` element is ignored when `language: cpp`. So whatever version of the JDK that was installed in the Travis container was used - typically JDK 11.
To ensure our RocksJava builds are working, we now instead install and use OpenJDK 8. Ideally we would use OpenJDK 7, as RocksJava supports Java 7, but many of the newer Travis containers don't support Java 7, so Java 8 is the next best thing.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6512
Differential Revision: D20388296
Pulled By: pdillinger
fbshipit-source-id: 8bbe6b59b70cfab7fe81ff63867d907fefdd2df1
Summary:
This helps to diagnose errors in the CMake build where it tries to retrieve dependencies.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6511
Differential Revision: D20387392
Pulled By: pdillinger
fbshipit-source-id: 7028dfd62704bcc747f39ff864ea9c9bf51cd1be
Summary:
In most places in the code the variable names are spelled correctly as
COMMITTED but in a couple places not. This fixes them and ensures the
variable is always called COMMITTED everywhere.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6481
Differential Revision: D20306776
Pulled By: pdillinger
fbshipit-source-id: b6c1bfe41db559b4bc6955c530934460c07f7022
Summary:
Threw assert error at assert(isOwningHandle()) in ColumnFamilyHandle.getDescriptor(),
because default CF don't own a handle, due to [RocksDB.getDefaultColumnFamily()](3a408eeae9/java/src/main/java/org/rocksdb/RocksDB.java (L3702)) called cfHandle.disOwnNativeHandle().
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6006
Differential Revision: D19031448
fbshipit-source-id: 2420c45e835bda0e552e919b1b63708472b91538
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433
Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.
Differential Revision: D19977691
fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
Summary:
It is very useful to support direct ByteBuffers in Java. It allows to have zero memory copy and some serializers are using that directly so one do not need to create byte[] array for it.
This change also contains some fixes for Windows JNI build.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/2283
Differential Revision: D19834971
Pulled By: pdillinger
fbshipit-source-id: 44173aa02afc9836c5498c592fd1ea95b6086e8e
Summary:
When paranoid_checks is on, DBImpl::CheckConsistency() iterates over all sst files and calls Env::GetFileSize() for each of them. As far as I could understand, this is pretty arbitrary and doesn't affect correctness - if filesystem doesn't corrupt fsynced files, the file sizes will always match; if it does, it may as well corrupt contents as well as sizes, and rocksdb doesn't check contents on open.
If there are thousands of sst files, getting all their sizes takes a while. If, on top of that, Env is overridden to use some remote storage instead of local filesystem, it can be *really* slow and overload the remote storage service. This PR adds an option to not do GetFileSize(); instead it does GetChildren() for parent directory to check that all the expected sst files are at least present, but doesn't check their sizes.
We can't just disable paranoid_checks instead because paranoid_checks do a few other important things: make the DB read-only on write errors, print error messages on read errors, etc.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6353
Test Plan: ran the added sanity check unit test. Will try it out in a LogDevice test cluster where the GetFileSize() calls are causing a lot of trouble.
Differential Revision: D19656425
Pulled By: al13n321
fbshipit-source-id: c2c421b367633033760d1f56747bad206d1fbf82
Summary:
This is a redesign of the API for RocksJava comparators with the aim of improving performance. It also simplifies the class hierarchy.
**NOTE**: This breaks backwards compatibility for existing 3rd party Comparators implemented in Java... so we need to consider carefully which release branches this goes into.
Previously when implementing a comparator in Java the developer had a choice of subclassing either `DirectComparator` or `Comparator` which would use direct and non-direct byte-buffers resepectively (via `DirectSlice` and `Slice`).
In this redesign there we have eliminated the overhead of using the Java Slice classes, and just use `ByteBuffer`s. The `ComparatorOptions` supplied when constructing a Comparator allow you to choose between direct and non-direct byte buffers by setting `useDirect`.
In addition, the `ComparatorOptions` now allow you to choose whether a ByteBuffer is reused over multiple comparator calls, by setting `maxReusedBufferSize > 0`. When buffers are reused, ComparatorOptions provides a choice of mutex type by setting `useAdaptiveMutex`.
---
[JMH benchmarks previously indicated](https://github.com/facebook/rocksdb/pull/6241#issue-356398306) that the difference between C++ and Java for implementing a comparator was ~7x slowdown in Java.
With these changes, when reusing buffers and guarding access to them via mutexes the slowdown is approximately the same. However, these changes offer a new facility to not reuse mutextes, which reduces the slowdown to ~5.5x in Java. We also offer a `thread_local` mechanism for reusing buffers, which reduces slowdown to ~5.2x in Java (closes https://github.com/facebook/rocksdb/pull/4425).
These changes also form a good base for further optimisation work such as further JNI lookup caching, and JNI critical.
---
These numbers were captured without jemalloc. With jemalloc, the performance improves for all tests, and the Java slowdown reduces to between 4.8x and 5.x.
```
ComparatorBenchmarks.put native_bytewise thrpt 25 124483.795 ± 2032.443 ops/s
ComparatorBenchmarks.put native_reverse_bytewise thrpt 25 114414.536 ± 3486.156 ops/s
ComparatorBenchmarks.put java_bytewise_non-direct_reused-64_adaptive-mutex thrpt 25 17228.250 ± 1288.546 ops/s
ComparatorBenchmarks.put java_bytewise_non-direct_reused-64_non-adaptive-mutex thrpt 25 16035.865 ± 1248.099 ops/s
ComparatorBenchmarks.put java_bytewise_non-direct_reused-64_thread-local thrpt 25 21571.500 ± 871.521 ops/s
ComparatorBenchmarks.put java_bytewise_direct_reused-64_adaptive-mutex thrpt 25 23613.773 ± 8465.660 ops/s
ComparatorBenchmarks.put java_bytewise_direct_reused-64_non-adaptive-mutex thrpt 25 16768.172 ± 5618.489 ops/s
ComparatorBenchmarks.put java_bytewise_direct_reused-64_thread-local thrpt 25 23921.164 ± 8734.742 ops/s
ComparatorBenchmarks.put java_bytewise_non-direct_no-reuse thrpt 25 17899.684 ± 839.679 ops/s
ComparatorBenchmarks.put java_bytewise_direct_no-reuse thrpt 25 22148.316 ± 1215.527 ops/s
ComparatorBenchmarks.put java_reverse_bytewise_non-direct_reused-64_adaptive-mutex thrpt 25 11311.126 ± 820.602 ops/s
ComparatorBenchmarks.put java_reverse_bytewise_non-direct_reused-64_non-adaptive-mutex thrpt 25 11421.311 ± 807.210 ops/s
ComparatorBenchmarks.put java_reverse_bytewise_non-direct_reused-64_thread-local thrpt 25 11554.005 ± 960.556 ops/s
ComparatorBenchmarks.put java_reverse_bytewise_direct_reused-64_adaptive-mutex thrpt 25 22960.523 ± 1673.421 ops/s
ComparatorBenchmarks.put java_reverse_bytewise_direct_reused-64_non-adaptive-mutex thrpt 25 18293.317 ± 1434.601 ops/s
ComparatorBenchmarks.put java_reverse_bytewise_direct_reused-64_thread-local thrpt 25 24479.361 ± 2157.306 ops/s
ComparatorBenchmarks.put java_reverse_bytewise_non-direct_no-reuse thrpt 25 7942.286 ± 626.170 ops/s
ComparatorBenchmarks.put java_reverse_bytewise_direct_no-reuse thrpt 25 11781.955 ± 1019.843 ops/s
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6252
Differential Revision: D19331064
Pulled By: pdillinger
fbshipit-source-id: 1f3b794e6a14162b2c3ffb943e8c0e64a0c03738
Summary:
I set up a mirror of our Java deps on github so we can download
them through github URLs rather than maven.org, which is proving
terribly unreliable from Travis builds.
Also sanitized calls to curl, so they are easier to read and
appropriately fail on download failure.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6348
Test Plan: CI
Differential Revision: D19633621
Pulled By: pdillinger
fbshipit-source-id: 7eb3f730953db2ead758dc94039c040f406790f3
Summary:
Both changes are related to RocksJava:
1. Allow dependencies that are already present on the host system due to Maven to be reused in Docker builds.
2. Extend the `make clean-not-downloaded` target to RocksJava, so that libraries needed as dependencies for the test suite are not deleted and re-downloaded unnecessarily.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6318
Differential Revision: D19608742
Pulled By: pdillinger
fbshipit-source-id: 25e25649e3e3212b537ac4512b40e2e53dc02ae7
Summary:
As of 1/15/2020, Maven Central does not support plain HTTP. Because of
this, our Travis and AppVeyor builds have started failing during the
assertj download step. This patch will hopefully fix these issues.
See https://blog.sonatype.com/central-repository-moving-to-https
for more info.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6301
Test Plan:
Will monitor the builds. ("I don't always test my changes but when I do,
I do it in production.")
Differential Revision: D19422923
Pulled By: ltamasi
fbshipit-source-id: 76f9a8564a5b66ddc721d705f9cbfc736bf7a97d
Summary:
This is the start of some JMH microbenchmarks for RocksJava.
Such benchmarks can help us decide on performance improvements of the Java API.
At the moment, I have only added benchmarks for various Comparator options, as that is one of the first areas where I want to improve performance. I plan to expand this to many more tests.
Details of how to compile and run the benchmarks are in the `README.md`.
A run of these on a XEON 3.5 GHz 4vCPU (QEMU Virtual CPU version 2.5+) / 8GB RAM KVM with Ubuntu 18.04, OpenJDK 1.8.0_232, and gcc 8.3.0 produced the following:
```
# Run complete. Total time: 01:43:17
REMEMBER: The numbers below are just data. To gain reusable insights, you need to follow up on
why the numbers are the way they are. Use profilers (see -prof, -lprof), design factorial
experiments, perform baseline and negative tests that provide experimental control, make sure
the benchmarking environment is safe on JVM/OS/HW level, ask for reviews from the domain experts.
Do not assume the numbers tell you what you want them to tell.
Benchmark (comparatorName) Mode Cnt Score Error Units
ComparatorBenchmarks.put native_bytewise thrpt 25 122373.920 ± 2200.538 ops/s
ComparatorBenchmarks.put java_bytewise_adaptive_mutex thrpt 25 17388.201 ± 1444.006 ops/s
ComparatorBenchmarks.put java_bytewise_non-adaptive_mutex thrpt 25 16887.150 ± 1632.204 ops/s
ComparatorBenchmarks.put java_direct_bytewise_adaptive_mutex thrpt 25 15644.572 ± 1791.189 ops/s
ComparatorBenchmarks.put java_direct_bytewise_non-adaptive_mutex thrpt 25 14869.601 ± 2252.135 ops/s
ComparatorBenchmarks.put native_reverse_bytewise thrpt 25 116528.735 ± 4168.797 ops/s
ComparatorBenchmarks.put java_reverse_bytewise_adaptive_mutex thrpt 25 10651.975 ± 545.998 ops/s
ComparatorBenchmarks.put java_reverse_bytewise_non-adaptive_mutex thrpt 25 10514.224 ± 930.069 ops/s
```
Indicating a ~7x difference between comparators implemented natively (C++) and those implemented in Java. Let's see if we can't improve on that in the near future...
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6241
Differential Revision: D19290410
Pulled By: pdillinger
fbshipit-source-id: 25d44bf3a31de265502ed0c5d8a28cf4c7cb9c0b
Summary:
There are no API changes ;-)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6218
Differential Revision: D19200373
Pulled By: pdillinger
fbshipit-source-id: 58d34b01ea53b75a1eccbd72f8b14d6256a7380f
Summary:
Should fix Travis build error that randomly showed up upon
using Java 13 version of javadoc.
AdvancedColumnFamilyOptionsInterface.java:257: error:
unexpected heading used: <H2>, compared to implicit preceding heading: <H3>
According to this reference https://bugs.openjdk.java.net/browse/JDK-8220379
it should work to start at h4, but that didn't work, so avoiding
headings should be fine.
Also fix Java EnvironmentTest for JDK13.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6208
Test Plan: Travis run on PR (don't have Java 13 handy)
Differential Revision: D19163105
Pulled By: pdillinger
fbshipit-source-id: 4a9419cbe7ef780fba771b8a1508e1ea80d17b3e
