Summary:
To support a project to prototype and evaluate algorithmic
enhancments and alternatives to LRUCache, here I have separated out
LRUCache into internal-only "FastLRUCache" and cut it down to
essentials, so that details like secondary cache handling and
priorities do not interfere with prototyping. These can be
re-integrated later as needed, along with refactoring to minimize code
duplication (which would slow down prototyping for now).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9917
Test Plan:
unit tests updated to ensure basic functionality has (likely)
been preserved
Reviewed By: anand1976
Differential Revision: D35995554
Pulled By: pdillinger
fbshipit-source-id: d67b20b7ada3b5d3bfe56d897a73885894a1d9db
Summary:
The param name force_erase may be misleading, since the handle is erased only if it has last reference even if the param is set true.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9728
Reviewed By: pdillinger
Differential Revision: D35038673
Pulled By: gitbw95
fbshipit-source-id: 0d16d1e8fed17b97eba7fb53207119332f659a5f
Summary:
Add a stat for secondary cache hits. The ```Cache::Lookup``` API had an unused ```stats``` parameter. This PR uses that to pass the pointer to a ```Statistics``` object that ```LRUCache``` uses to record the stat.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8666
Test Plan: Update a unit test in lru_cache_test
Reviewed By: zhichao-cao
Differential Revision: D30353816
Pulled By: anand1976
fbshipit-source-id: 2046f78b460428877a26ffdd2bb914ae47dfbe77
Summary:
I previously didn't notice the DB mutex was being held during
block cache entry stat scans, probably because I primarily checked for
read performance regressions, because they require the block cache and
are traditionally latency-sensitive.
This change does some refactoring to avoid holding DB mutex and to
avoid triggering and waiting for a scan in GetProperty("rocksdb.cfstats").
Some tests have to be updated because now the stats collector is
populated in the Cache aggressively on DB startup rather than lazily.
(I hope to clean up some of this added complexity in the future.)
This change also ensures proper treatment of need_out_of_mutex for
non-int DB properties.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8538
Test Plan:
Added unit test logic that uses sync points to fail if the DB mutex
is held during a scan, covering the various ways that a scan might be
triggered.
Performance test - the known impact to holding the DB mutex is on
TransactionDB, and the easiest way to see the impact is to hack the
scan code to almost always miss and take an artificially long time
scanning. Here I've injected an unconditional 5s sleep at the call to
ApplyToAllEntries.
Before (hacked):
$ TEST_TMPDIR=/dev/shm ./db_bench.base_xxx -benchmarks=randomtransaction,stats -cache_index_and_filter_blocks=1 -bloom_bits=10 -partition_index_and_filters=1 -duration=30 -stats_dump_period_sec=12 -cache_size=100000000 -statistics -transaction_db 2>&1 | egrep 'db.db.write.micros|micros/op'
randomtransaction : 433.219 micros/op 2308 ops/sec; 0.1 MB/s ( transactions:78999 aborts:0)
rocksdb.db.write.micros P50 : 16.135883 P95 : 36.622503 P99 : 66.036115 P100 : 5000614.000000 COUNT : 149677 SUM : 8364856
$ TEST_TMPDIR=/dev/shm ./db_bench.base_xxx -benchmarks=randomtransaction,stats -cache_index_and_filter_blocks=1 -bloom_bits=10 -partition_index_and_filters=1 -duration=30 -stats_dump_period_sec=12 -cache_size=100000000 -statistics -transaction_db 2>&1 | egrep 'db.db.write.micros|micros/op'
randomtransaction : 448.802 micros/op 2228 ops/sec; 0.1 MB/s ( transactions:75999 aborts:0)
rocksdb.db.write.micros P50 : 16.629221 P95 : 37.320607 P99 : 72.144341 P100 : 5000871.000000 COUNT : 143995 SUM : 13472323
Notice the 5s P100 write time.
After (hacked):
$ TEST_TMPDIR=/dev/shm ./db_bench.new_xxx -benchmarks=randomtransaction,stats -cache_index_and_filter_blocks=1 -bloom_bits=10 -partition_index_and_filters=1 -duration=30 -stats_dump_period_sec=12 -cache_size=100000000 -statistics -transaction_db 2>&1 | egrep 'db.db.write.micros|micros/op'
randomtransaction : 303.645 micros/op 3293 ops/sec; 0.1 MB/s ( transactions:98999 aborts:0)
rocksdb.db.write.micros P50 : 16.061871 P95 : 33.978834 P99 : 60.018017 P100 : 616315.000000 COUNT : 187619 SUM : 4097407
$ TEST_TMPDIR=/dev/shm ./db_bench.new_xxx -benchmarks=randomtransaction,stats -cache_index_and_filter_blocks=1 -bloom_bits=10 -partition_index_and_filters=1 -duration=30 -stats_dump_period_sec=12 -cache_size=100000000 -statistics -transaction_db 2>&1 | egrep 'db.db.write.micros|micros/op'
randomtransaction : 310.383 micros/op 3221 ops/sec; 0.1 MB/s ( transactions:96999 aborts:0)
rocksdb.db.write.micros P50 : 16.270026 P95 : 35.786844 P99 : 64.302878 P100 : 603088.000000 COUNT : 183819 SUM : 4095918
P100 write is now ~0.6s. Not good, but it's the same even if I completely bypass all the scanning code:
$ TEST_TMPDIR=/dev/shm ./db_bench.new_skip -benchmarks=randomtransaction,stats -cache_index_and_filter_blocks=1 -bloom_bits=10 -partition_index_and_filters=1 -duration=30 -stats_dump_period_sec=12 -cache_size=100000000 -statistics -transaction_db 2>&1 | egrep 'db.db.write.micros|micros/op'
randomtransaction : 311.365 micros/op 3211 ops/sec; 0.1 MB/s ( transactions:96999 aborts:0)
rocksdb.db.write.micros P50 : 16.274362 P95 : 36.221184 P99 : 68.809783 P100 : 649808.000000 COUNT : 183819 SUM : 4156767
$ TEST_TMPDIR=/dev/shm ./db_bench.new_skip -benchmarks=randomtransaction,stats -cache_index_and_filter_blocks=1 -bloom_bits=10 -partition_index_and_filters=1 -duration=30 -stats_dump_period_sec=12 -cache_size=100000000 -statistics -transaction_db 2>&1 | egrep 'db.db.write.micros|micros/op'
randomtransaction : 308.395 micros/op 3242 ops/sec; 0.1 MB/s ( transactions:97999 aborts:0)
rocksdb.db.write.micros P50 : 16.106222 P95 : 37.202403 P99 : 67.081875 P100 : 598091.000000 COUNT : 185714 SUM : 4098832
No substantial difference.
Reviewed By: siying
Differential Revision: D29738847
Pulled By: pdillinger
fbshipit-source-id: 1c5c155f5a1b62e4fea0fd4eeb515a8b7474027b
Summary:
Some bits are mutated and read while holding a lock, other
immutable bits (esp. secondary cache compatibility) can be read by
arbitrary threads without holding a lock. AFAIK, this doesn't cause an
issue on any architecture we care about, because you will get some
legitimate version of the value that includes the initialization, as
long as synchronization guarantees the initialization happens before the
read.
I've only seen this in https://github.com/facebook/rocksdb/issues/8538 so far, but it should be fixed regardless.
Otherwise, we'll surely get these false reports again some time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8539
Test Plan: some local TSAN test runs and in CircleCI
Reviewed By: zhichao-cao
Differential Revision: D29720262
Pulled By: pdillinger
fbshipit-source-id: 365fd7e565577c648815161f71b339bcb5ce12d5
Summary:
Implement the ```WaitAll()``` interface in ```LRUCache``` to allow callers to issue multiple lookups in parallel and wait for all of them to complete. Modify ```MultiGet``` to use this to parallelize the secondary cache lookups in order to reduce the overall latency. A call to ```cache->Lookup()``` returns a handle that has an incomplete value (nullptr), and the caller can call ```cache->IsReady()``` to check whether the lookup is complete, and pass a vector of handles to ```WaitAll``` to wait for completion. If any of the lookups fail, ```MultiGet``` will read the block from the SST file.
Another change in this PR is to rename ```SecondaryCacheHandle``` to ```SecondaryCacheResultHandle``` as it more accurately describes the return result of the secondary cache lookup, which is more like a future.
Tests:
1. Add unit tests in lru_cache_test
2. Benchmark results with no secondary cache configured
Master -
```
readrandom : 41.175 micros/op 388562 ops/sec; 106.7 MB/s (7277999 of 7277999 found)
readrandom : 41.217 micros/op 388160 ops/sec; 106.6 MB/s (7274999 of 7274999 found)
multireadrandom : 10.309 micros/op 1552082 ops/sec; (28908992 of 28908992 found)
multireadrandom : 10.321 micros/op 1550218 ops/sec; (29081984 of 29081984 found)
```
This PR -
```
readrandom : 41.158 micros/op 388723 ops/sec; 106.8 MB/s (7290999 of 7290999 found)
readrandom : 41.185 micros/op 388463 ops/sec; 106.7 MB/s (7287999 of 7287999 found)
multireadrandom : 10.277 micros/op 1556801 ops/sec; (29346944 of 29346944 found)
multireadrandom : 10.253 micros/op 1560539 ops/sec; (29274944 of 29274944 found)
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8405
Reviewed By: zhichao-cao
Differential Revision: D29190509
Pulled By: anand1976
fbshipit-source-id: 6f8eff6246712af8a297cfe22ea0d1c3b2a01bb0
Summary:
This change gathers and publishes statistics about the
kinds of items in block cache. This is especially important for
profiling relative usage of cache by index vs. filter vs. data blocks.
It works by iterating over the cache during periodic stats dump
(InternalStats, stats_dump_period_sec) or on demand when
DB::Get(Map)Property(kBlockCacheEntryStats), except that for
efficiency and sharing among column families, saved data from
the last scan is used when the data is not considered too old.
The new information can be seen in info LOG, for example:
Block cache LRUCache@0x7fca62229330 capacity: 95.37 MB collections: 8 last_copies: 0 last_secs: 0.00178 secs_since: 0
Block cache entry stats(count,size,portion): DataBlock(7092,28.24 MB,29.6136%) FilterBlock(215,867.90 KB,0.888728%) FilterMetaBlock(2,5.31 KB,0.00544%) IndexBlock(217,180.11 KB,0.184432%) WriteBuffer(1,256.00 KB,0.262144%) Misc(1,0.00 KB,0%)
And also through DB::GetProperty and GetMapProperty (here using
ldb just for demonstration):
$ ./ldb --db=/dev/shm/dbbench/ get_property rocksdb.block-cache-entry-stats
rocksdb.block-cache-entry-stats.bytes.data-block: 0
rocksdb.block-cache-entry-stats.bytes.deprecated-filter-block: 0
rocksdb.block-cache-entry-stats.bytes.filter-block: 0
rocksdb.block-cache-entry-stats.bytes.filter-meta-block: 0
rocksdb.block-cache-entry-stats.bytes.index-block: 178992
rocksdb.block-cache-entry-stats.bytes.misc: 0
rocksdb.block-cache-entry-stats.bytes.other-block: 0
rocksdb.block-cache-entry-stats.bytes.write-buffer: 0
rocksdb.block-cache-entry-stats.capacity: 8388608
rocksdb.block-cache-entry-stats.count.data-block: 0
rocksdb.block-cache-entry-stats.count.deprecated-filter-block: 0
rocksdb.block-cache-entry-stats.count.filter-block: 0
rocksdb.block-cache-entry-stats.count.filter-meta-block: 0
rocksdb.block-cache-entry-stats.count.index-block: 215
rocksdb.block-cache-entry-stats.count.misc: 1
rocksdb.block-cache-entry-stats.count.other-block: 0
rocksdb.block-cache-entry-stats.count.write-buffer: 0
rocksdb.block-cache-entry-stats.id: LRUCache@0x7f3636661290
rocksdb.block-cache-entry-stats.percent.data-block: 0.000000
rocksdb.block-cache-entry-stats.percent.deprecated-filter-block: 0.000000
rocksdb.block-cache-entry-stats.percent.filter-block: 0.000000
rocksdb.block-cache-entry-stats.percent.filter-meta-block: 0.000000
rocksdb.block-cache-entry-stats.percent.index-block: 2.133751
rocksdb.block-cache-entry-stats.percent.misc: 0.000000
rocksdb.block-cache-entry-stats.percent.other-block: 0.000000
rocksdb.block-cache-entry-stats.percent.write-buffer: 0.000000
rocksdb.block-cache-entry-stats.secs_for_last_collection: 0.000052
rocksdb.block-cache-entry-stats.secs_since_last_collection: 0
Solution detail - We need some way to flag what kind of blocks each
entry belongs to, preferably without changing the Cache API.
One of the complications is that Cache is a general interface that could
have other users that don't adhere to whichever convention we decide
on for keys and values. Or we would pay for an extra field in the Handle
that would only be used for this purpose.
This change uses a back-door approach, the deleter, to indicate the
"role" of a Cache entry (in addition to the value type, implicitly).
This has the added benefit of ensuring proper code origin whenever we
recognize a particular role for a cache entry; if the entry came from
some other part of the code, it will use an unrecognized deleter, which
we simply attribute to the "Misc" role.
An internal API makes for simple instantiation and automatic
registration of Cache deleters for a given value type and "role".
Another internal API, CacheEntryStatsCollector, solves the problem of
caching the results of a scan and sharing them, to ensure scans are
neither excessive nor redundant so as not to harm Cache performance.
Because code is added to BlocklikeTraits, it is pulled out of
block_based_table_reader.cc into its own file.
This is a reformulation of https://github.com/facebook/rocksdb/issues/8276, without the type checking option
(could still be added), and with actual stat gathering.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8297
Test Plan: manual testing with db_bench, and a couple of basic unit tests
Reviewed By: ltamasi
Differential Revision: D28488721
Pulled By: pdillinger
fbshipit-source-id: 472f524a9691b5afb107934be2d41d84f2b129fb
Summary:
Defined the abstract interface for a secondary cache in include/rocksdb/secondary_cache.h, and updated LRUCacheOptions to take a std::shared_ptr<SecondaryCache>. An item is initially inserted into the LRU (primary) cache. When it ages out and evicted from memory, its inserted into the secondary cache. On a LRU cache miss and successful lookup in the secondary cache, the item is promoted to the LRU cache. Only support synchronous lookup currently. The secondary cache would be used to implement a persistent (flash cache) or compressed cache.
Tests:
Results from cache_bench and db_bench don't show any regression due to these changes.
cache_bench results before and after this change -
Command
```./cache_bench -ops_per_thread=10000000 -threads=1```
Before
```Complete in 40.688 s; QPS = 245774```
```Complete in 40.486 s; QPS = 246996```
```Complete in 42.019 s; QPS = 237989```
After
```Complete in 40.672 s; QPS = 245869```
```Complete in 44.622 s; QPS = 224107```
```Complete in 42.445 s; QPS = 235599```
db_bench results before this change, and with this change + https://github.com/facebook/rocksdb/issues/8213 and https://github.com/facebook/rocksdb/issues/8191 -
Commands
```./db_bench --benchmarks="fillseq,compact" -num=30000000 -key_size=32 -value_size=256 -use_direct_io_for_flush_and_compaction=true -db=/home/anand76/nvm_cache/db -partition_index_and_filters=true```
```./db_bench -db=/home/anand76/nvm_cache/db -use_existing_db=true -benchmarks=readrandom -num=30000000 -key_size=32 -value_size=256 -use_direct_reads=true -cache_size=1073741824 -cache_numshardbits=6 -cache_index_and_filter_blocks=true -read_random_exp_range=17 -statistics -partition_index_and_filters=true -threads=16 -duration=300```
Before
```
DB path: [/home/anand76/nvm_cache/db]
readrandom : 80.702 micros/op 198104 ops/sec; 54.4 MB/s (3708999 of 3708999 found)
```
```
DB path: [/home/anand76/nvm_cache/db]
readrandom : 87.124 micros/op 183625 ops/sec; 50.4 MB/s (3439999 of 3439999 found)
```
After
```
DB path: [/home/anand76/nvm_cache/db]
readrandom : 77.653 micros/op 206025 ops/sec; 56.6 MB/s (3866999 of 3866999 found)
```
```
DB path: [/home/anand76/nvm_cache/db]
readrandom : 84.962 micros/op 188299 ops/sec; 51.7 MB/s (3535999 of 3535999 found)
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8271
Reviewed By: zhichao-cao
Differential Revision: D28357511
Pulled By: anand1976
fbshipit-source-id: d1cfa236f00e649a18c53328be10a8062a4b6da2
Summary:
Adds a new Cache::ApplyToAllEntries API that we expect to use
(in follow-up PRs) for efficiently gathering block cache statistics.
Notable features vs. old ApplyToAllCacheEntries:
* Includes key and deleter (in addition to value and charge). We could
have passed in a Handle but then more virtual function calls would be
needed to get the "fields" of each entry. We expect to use the 'deleter'
to identify the origin of entries, perhaps even more.
* Heavily tuned to minimize latency impact on operating cache. It
does this by iterating over small sections of each cache shard while
cycling through the shards.
* Supports tuning roughly how many entries to operate on for each
lock acquire and release, to control the impact on the latency of other
operations without excessive lock acquire & release. The right balance
can depend on the cost of the callback. Good default seems to be
around 256.
* There should be no need to disable thread safety. (I would expect
uncontended locks to be sufficiently fast.)
I have enhanced cache_bench to validate this approach:
* Reports a histogram of ns per operation, so we can look at the
ditribution of times, not just throughput (average).
* Can add a thread for simulated "gather stats" which calls
ApplyToAllEntries at a specified interval. We also generate a histogram
of time to run ApplyToAllEntries.
To make the iteration over some entries of each shard work as cleanly as
possible, even with resize between next set of entries, I have
re-arranged which hash bits are used for sharding and which for indexing
within a shard.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8225
Test Plan:
A couple of unit tests are added, but primary validation is manual, as
the primary risk is to performance.
The primary validation is using cache_bench to ensure that neither
the minor hashing changes nor the simulated stats gathering
significantly impact QPS or latency distribution. Note that adding op
latency histogram seriously impacts the benchmark QPS, so for a
fair baseline, we need the cache_bench changes (except remove simulated
stat gathering to make it compile). In short, we don't see any
reproducible difference in ops/sec or op latency unless we are gathering
stats nearly continuously. Test uses 10GB block cache with
8KB values to be somewhat realistic in the number of items to iterate
over.
Baseline typical output:
```
Complete in 92.017 s; Rough parallel ops/sec = 869401
Thread ops/sec = 54662
Operation latency (ns):
Count: 80000000 Average: 11223.9494 StdDev: 29.61
Min: 0 Median: 7759.3973 Max: 9620500
Percentiles: P50: 7759.40 P75: 14190.73 P99: 46922.75 P99.9: 77509.84 P99.99: 217030.58
------------------------------------------------------
[ 0, 1 ] 68 0.000% 0.000%
( 2900, 4400 ] 89 0.000% 0.000%
( 4400, 6600 ] 33630240 42.038% 42.038% ########
( 6600, 9900 ] 18129842 22.662% 64.700% #####
( 9900, 14000 ] 7877533 9.847% 74.547% ##
( 14000, 22000 ] 15193238 18.992% 93.539% ####
( 22000, 33000 ] 3037061 3.796% 97.335% #
( 33000, 50000 ] 1626316 2.033% 99.368%
( 50000, 75000 ] 421532 0.527% 99.895%
( 75000, 110000 ] 56910 0.071% 99.966%
( 110000, 170000 ] 16134 0.020% 99.986%
( 170000, 250000 ] 5166 0.006% 99.993%
( 250000, 380000 ] 3017 0.004% 99.996%
( 380000, 570000 ] 1337 0.002% 99.998%
( 570000, 860000 ] 805 0.001% 99.999%
( 860000, 1200000 ] 319 0.000% 100.000%
( 1200000, 1900000 ] 231 0.000% 100.000%
( 1900000, 2900000 ] 100 0.000% 100.000%
( 2900000, 4300000 ] 39 0.000% 100.000%
( 4300000, 6500000 ] 16 0.000% 100.000%
( 6500000, 9800000 ] 7 0.000% 100.000%
```
New, gather_stats=false. Median thread ops/sec of 5 runs:
```
Complete in 92.030 s; Rough parallel ops/sec = 869285
Thread ops/sec = 54458
Operation latency (ns):
Count: 80000000 Average: 11298.1027 StdDev: 42.18
Min: 0 Median: 7722.0822 Max: 6398720
Percentiles: P50: 7722.08 P75: 14294.68 P99: 47522.95 P99.9: 85292.16 P99.99: 228077.78
------------------------------------------------------
[ 0, 1 ] 109 0.000% 0.000%
( 2900, 4400 ] 793 0.001% 0.001%
( 4400, 6600 ] 34054563 42.568% 42.569% #########
( 6600, 9900 ] 17482646 21.853% 64.423% ####
( 9900, 14000 ] 7908180 9.885% 74.308% ##
( 14000, 22000 ] 15032072 18.790% 93.098% ####
( 22000, 33000 ] 3237834 4.047% 97.145% #
( 33000, 50000 ] 1736882 2.171% 99.316%
( 50000, 75000 ] 446851 0.559% 99.875%
( 75000, 110000 ] 68251 0.085% 99.960%
( 110000, 170000 ] 18592 0.023% 99.983%
( 170000, 250000 ] 7200 0.009% 99.992%
( 250000, 380000 ] 3334 0.004% 99.997%
( 380000, 570000 ] 1393 0.002% 99.998%
( 570000, 860000 ] 700 0.001% 99.999%
( 860000, 1200000 ] 293 0.000% 100.000%
( 1200000, 1900000 ] 196 0.000% 100.000%
( 1900000, 2900000 ] 69 0.000% 100.000%
( 2900000, 4300000 ] 32 0.000% 100.000%
( 4300000, 6500000 ] 10 0.000% 100.000%
```
New, gather_stats=true, 1 second delay between scans. Scans take about
1 second here so it's spending about 50% time scanning. Still the effect on
ops/sec and latency seems to be in the noise. Median thread ops/sec of 5 runs:
```
Complete in 91.890 s; Rough parallel ops/sec = 870608
Thread ops/sec = 54551
Operation latency (ns):
Count: 80000000 Average: 11311.2629 StdDev: 45.28
Min: 0 Median: 7686.5458 Max: 10018340
Percentiles: P50: 7686.55 P75: 14481.95 P99: 47232.60 P99.9: 79230.18 P99.99: 232998.86
------------------------------------------------------
[ 0, 1 ] 71 0.000% 0.000%
( 2900, 4400 ] 291 0.000% 0.000%
( 4400, 6600 ] 34492060 43.115% 43.116% #########
( 6600, 9900 ] 16727328 20.909% 64.025% ####
( 9900, 14000 ] 7845828 9.807% 73.832% ##
( 14000, 22000 ] 15510654 19.388% 93.220% ####
( 22000, 33000 ] 3216533 4.021% 97.241% #
( 33000, 50000 ] 1680859 2.101% 99.342%
( 50000, 75000 ] 439059 0.549% 99.891%
( 75000, 110000 ] 60540 0.076% 99.967%
( 110000, 170000 ] 14649 0.018% 99.985%
( 170000, 250000 ] 5242 0.007% 99.991%
( 250000, 380000 ] 3260 0.004% 99.995%
( 380000, 570000 ] 1599 0.002% 99.997%
( 570000, 860000 ] 1043 0.001% 99.999%
( 860000, 1200000 ] 471 0.001% 99.999%
( 1200000, 1900000 ] 275 0.000% 100.000%
( 1900000, 2900000 ] 143 0.000% 100.000%
( 2900000, 4300000 ] 60 0.000% 100.000%
( 4300000, 6500000 ] 27 0.000% 100.000%
( 6500000, 9800000 ] 7 0.000% 100.000%
( 9800000, 14000000 ] 1 0.000% 100.000%
Gather stats latency (us):
Count: 46 Average: 980387.5870 StdDev: 60911.18
Min: 879155 Median: 1033777.7778 Max: 1261431
Percentiles: P50: 1033777.78 P75: 1120666.67 P99: 1261431.00 P99.9: 1261431.00 P99.99: 1261431.00
------------------------------------------------------
( 860000, 1200000 ] 45 97.826% 97.826% ####################
( 1200000, 1900000 ] 1 2.174% 100.000%
Most recent cache entry stats:
Number of entries: 1295133
Total charge: 9.88 GB
Average key size: 23.4982
Average charge: 8.00 KB
Unique deleters: 3
```
Reviewed By: mrambacher
Differential Revision: D28295742
Pulled By: pdillinger
fbshipit-source-id: bbc4a552f91ba0fe10e5cc025c42cef5a81f2b95
Summary:
Hi there,
This PR fixes a few typos in comments in `cache/lru_cache.h`.
Thanks
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7687
Reviewed By: ajkr
Differential Revision: D25064674
Pulled By: jay-zhuang
fbshipit-source-id: fe633369d5b82c5aac42d4ee8d551b9d657237d1
Summary:
As the first step of reintroducing eviction statistics for the block
cache, the patch switches from using simple function pointers as deleters
to function objects implementing an interface. This will enable using
deleters that have state, like a smart pointer to the statistics object
that is to be updated when an entry is removed from the cache. For now,
the patch adds a deleter template class `SimpleDeleter`, which simply
casts the `value` pointer to its original type and calls `delete` or
`delete[]` on it as appropriate. Note: to prevent object lifecycle
issues, deleters must outlive the cache entries referring to them;
`SimpleDeleter` ensures this by using the ("leaky") Meyers singleton
pattern.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6545
Test Plan: `make asan_check`
Reviewed By: siying
Differential Revision: D20475823
Pulled By: ltamasi
fbshipit-source-id: fe354c33dd96d9bafc094605462352305449a22a
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433
Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.
Differential Revision: D19977691
fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
Summary:
Inserting an entry in the block cache with 0 length key is a valid use case. Remove the assertion in ```LRUHandle::CalcTotalCharge```.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6115
Differential Revision: D18769693
Pulled By: anand1976
fbshipit-source-id: 34cc159650300dda6d7273480640478f28392cda
Summary:
For our default block cache, each additional entry has extra memory overhead. It include LRUHandle (72 bytes currently) and the cache key (two varint64, file id and offset). The usage is not negligible. For example for block_size=4k, the overhead accounts for an extra 2% memory usage for the cache. The patch charging the cache for the extra usage, reducing untracked memory usage outside block cache. The feature is enabled by default and can be disabled by passing kDontChargeCacheMetadata to the cache constructor.
This PR builds up on https://github.com/facebook/rocksdb/issues/4258
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5797
Test Plan:
- Existing tests are updated to either disable the feature when the test has too much dependency on the old way of accounting the usage or increasing the cache capacity to account for the additional charge of metadata.
- The Usage tests in cache_test.cc are augmented to test the cache usage under kFullChargeCacheMetadata.
Differential Revision: D17396833
Pulled By: maysamyabandeh
fbshipit-source-id: 7684ccb9f8a40ca595e4f5efcdb03623afea0c6f
Summary:
The 'refs' field in LRUHandle now counts only external references, since anyway we already have the IN_CACHE flag. This simplifies reference accounting logic a bit. Also cleaned up few asserts code as well as the comments - to be more readable.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5579
Differential Revision: D16286747
Pulled By: elipoz
fbshipit-source-id: 7186d88f80f512ce584d0a303437494b5cbefd7f
Summary:
cache functions heavily use virtual functions.
Add some "final" annotations to give compilers more information
to optimize. The compiler doesn't seem to take advantage of it
though. But it doesn't hurt.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5156
Differential Revision: D14814837
Pulled By: siying
fbshipit-source-id: 4423f58eafc93f7dd3c5f04b02b5c993dba2ea94
Summary:
The patch adds a new config option to LRUCacheOptions that enables
users to choose whether to use an adaptive mutex for the LRU block
cache (on platforms where adaptive mutexes are supported). The default
is true if RocksDB is compiled with -DROCKSDB_DEFAULT_TO_ADAPTIVE_MUTEX,
false otherwise.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5054
Differential Revision: D14542749
Pulled By: ltamasi
fbshipit-source-id: 0065715ab6cf91f10444b737fed8c8aee6a8a0d2
Summary:
Replace the integers used for setting and querying the various
flags in LRUHandle with enum values to improve readability.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5024
Differential Revision: D14263429
Pulled By: ltamasi
fbshipit-source-id: b1b9ba95635265f122c2b40da73850eaac18227a
Summary:
…ons (#4676)"
This reverts commit b32d087dbb.
`MemoryAllocator` needs to be with `Cache`, since cache entry can
outlive DB and block based table. The cache needs to hold reference to
memory allocator when deleting cache entry.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4697
Differential Revision: D13133490
Pulled By: yiwu-arbug
fbshipit-source-id: 8ef7e8a51263bfd929f892fd062665ff4ce9ce5a
Summary:
Per offline discussion with siying, `MemoryAllocator` and `Cache` should be decouple. The idea is that memory allocator handles memory allocation, while cache handle cache policy.
It is normal that external cache libraries pack couple the two components for better optimization. If we want to integrate with such library in the future, we can make a wrapper of the library implementing both `Cache` and `MemoryAllocator` interface.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4676
Differential Revision: D13047662
Pulled By: yiwu-arbug
fbshipit-source-id: cd42e246d80ab600b4de47d073f7d2db308ce6dd
Summary:
Rename the interface, as it is mean to be a generic interface for memory allocation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4590
Differential Revision: D10866340
Pulled By: yiwu-arbug
fbshipit-source-id: 85cb753351a40cb856c046aeaa3f3b369eef3d16
Summary:
This is a conceptually simple change, but it touches many files to
pass the allocator through function calls.
We introduce CacheAllocator, which can be used by clients to configure
custom allocator for cache blocks. Our motivation is to hook this up
with folly's `JemallocNodumpAllocator`
(f43ce6d686/folly/experimental/JemallocNodumpAllocator.h),
but there are many other possible use cases.
Additionally, this commit cleans up memory allocation in
`util/compression.h`, making sure that all allocations are wrapped in a
unique_ptr as soon as possible.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4437
Differential Revision: D10132814
Pulled By: yiwu-arbug
fbshipit-source-id: be1343a4b69f6048df127939fea9bbc96969f564
Summary:
Implement midpoint insertion strategy where new blocks will be insert to the middle of LRU list, then move the head on the first hit in cache.
Closes https://github.com/facebook/rocksdb/pull/3877
Differential Revision: D8100895
Pulled By: yiwu-arbug
fbshipit-source-id: f4bd83cb8be469e5d02072cfc8bd66011391f3da
Summary:
Update LRUCacheShard constructor so that adding new params to it don't need to add extra SetXXX() methods.
Closes https://github.com/facebook/rocksdb/pull/3896
Differential Revision: D8128618
Pulled By: yiwu-arbug
fbshipit-source-id: 6afa715de1493a50de413678761a765e3af9b83b
Summary:
Problem: Option string accepts only cache_size as parameter for block_cache which is specified as "block_cache=1M".
It doesn't accept other parameters like num_shards etc.
Changes :
1) ParseBlockBasedTableOption in block_based_table_factory is edited to accept cache options in the format "block_cache=<cache_size>:<num_shard_bits>:<strict_capacity_limit>:<high_pri_pool_ratio>".
Options other than cache_size are optional to maintain backward compatibility. The changes are valid for block_cache_compressed as well.
For example, "block_cache=1M:6:true:0.5", "block_cache=1M:6:true", "block_cache=1M:6" and "block_cache=1M" are all valid option strings.
2) Corresponding unit tests are added.
Closes https://github.com/facebook/rocksdb/pull/3108
Differential Revision: D6420997
Pulled By: sagar0
fbshipit-source-id: cdea8b785688d2802907974af27225ccc1c0cd43
Summary:
This patch enables using PinnableSlice for RowCache, changes include
not releasing the cache handle immediately after lookup in TableCache::Get, instead pass a Cleanble function which does Cache::RleaseHandle.
Closes https://github.com/facebook/rocksdb/pull/2492
Differential Revision: D5316216
Pulled By: maysamyabandeh
fbshipit-source-id: d2a684bd7e4ba73772f762e58a82b5f4fbd5d362
Summary:
This is useful when we put the entries in the block cache for accounting
purposes and do not expect it to be used after it is released. If the cache does not
erase the item in such cases not only the performance of cache is
negatively affected but the item's destructor not being called at the
time of release might violate the assumptions about the lifetime of the
object.
The new change adds a force_erase option to the Release method and
returns a boolean to indicate whehter the item is successfully deleted.
Closes https://github.com/facebook/rocksdb/pull/2180
Differential Revision: D4916032
Pulled By: maysamyabandeh
fbshipit-source-id: 94409a346069923cac9de8e57adc313b4ed46f28
Summary:
Move some files under util/ to new directories env/, monitoring/ options/ and cache/
Closes https://github.com/facebook/rocksdb/pull/2090
Differential Revision: D4833681
Pulled By: siying
fbshipit-source-id: 2fd8bef
