Commit Graph

133 Commits

Author SHA1 Message Date
mrambacher
3dff28cf9b Use SystemClock* instead of std::shared_ptr<SystemClock> in lower level routines (#8033)
Summary:
For performance purposes, the lower level routines were changed to use a SystemClock* instead of a std::shared_ptr<SystemClock>.  The shared ptr has some performance degradation on certain hardware classes.

For most of the system, there is no risk of the pointer being deleted/invalid because the shared_ptr will be stored elsewhere.  For example, the ImmutableDBOptions stores the Env which has a std::shared_ptr<SystemClock> in it.  The SystemClock* within the ImmutableDBOptions is essentially a "short cut" to gain access to this constant resource.

There were a few classes (PeriodicWorkScheduler?) where the "short cut" property did not hold.  In those cases, the shared pointer was preserved.

Using db_bench readrandom perf_level=3 on my EC2 box, this change performed as well or better than 6.17:

6.17: readrandom   :      28.046 micros/op 854902 ops/sec;   61.3 MB/s (355999 of 355999 found)
6.18: readrandom   :      32.615 micros/op 735306 ops/sec;   52.7 MB/s (290999 of 290999 found)
PR: readrandom   :      27.500 micros/op 871909 ops/sec;   62.5 MB/s (367999 of 367999 found)

(Note that the times for 6.18 are prior to revert of the SystemClock).

Pull Request resolved: https://github.com/facebook/rocksdb/pull/8033

Reviewed By: pdillinger

Differential Revision: D27014563

Pulled By: mrambacher

fbshipit-source-id: ad0459eba03182e454391b5926bf5cdd45657b67
2021-03-15 04:34:11 -07:00
Andrew Kryczka
78ee8564ad Integrity protection for live updates to WriteBatch (#7748)
Summary:
This PR adds the foundation classes for key-value integrity protection and the first use case: protecting live updates from the source buffers added to `WriteBatch` through the destination buffer in `MemTable`. The width of the protection info is not yet configurable -- only eight bytes per key is supported. This PR allows users to enable protection by constructing `WriteBatch` with `protection_bytes_per_key == 8`. It does not yet expose a way for users to get integrity protection via other write APIs (e.g., `Put()`, `Merge()`, `Delete()`, etc.).

The foundation classes (`ProtectionInfo.*`) embed the coverage info in their type, and provide `Protect.*()` and `Strip.*()` functions to navigate between types with different coverage. For making bytes per key configurable (for powers of two up to eight) in the future, these classes are templated on the unsigned integer type used to store the protection info. That integer contains the XOR'd result of hashes with independent seeds for all covered fields. For integer fields, the hash is computed on the raw unadjusted bytes, so the result is endian-dependent. The most significant bytes are truncated when the hash value (8 bytes) is wider than the protection integer.

When `WriteBatch` is constructed with `protection_bytes_per_key == 8`, we hold a `ProtectionInfoKVOTC` (i.e., one that covers key, value, optype aka `ValueType`, timestamp, and CF ID) for each entry added to the batch. The protection info is generated from the original buffers passed by the user, as well as the original metadata generated internally. When writing to memtable, each entry is transformed to a `ProtectionInfoKVOTS` (i.e., dropping coverage of CF ID and adding coverage of sequence number), since at that point we know the sequence number, and have already selected a memtable corresponding to a particular CF. This protection info is verified once the entry is encoded in the `MemTable` buffer.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7748

Test Plan:
- an integration test to verify a wide variety of single-byte changes to the encoded `MemTable` buffer are caught
- add to stress/crash test to verify it works in variety of configs/operations without intentional corruption
- [deferred] unit tests for `ProtectionInfo.*` classes for edge cases like KV swap, `SliceParts` and `Slice` APIs are interchangeable, etc.

Reviewed By: pdillinger

Differential Revision: D25754492

Pulled By: ajkr

fbshipit-source-id: e481bac6c03c2ab268be41359730f1ceb9964866
2021-01-29 12:18:58 -08:00
mrambacher
12f1137355 Add a SystemClock class to capture the time functions of an Env (#7858)
Summary:
Introduces and uses a SystemClock class to RocksDB.  This class contains the time-related functions of an Env and these functions can be redirected from the Env to the SystemClock.

Many of the places that used an Env (Timer, PerfStepTimer, RepeatableThread, RateLimiter, WriteController) for time-related functions have been changed to use SystemClock instead.  There are likely more places that can be changed, but this is a start to show what can/should be done.  Over time it would be nice to migrate most (if not all) of the uses of the time functions from the Env to the SystemClock.

There are several Env classes that implement these functions.  Most of these have not been converted yet to SystemClock implementations; that will come in a subsequent PR.  It would be good to unify many of the Mock Timer implementations, so that they behave similarly and be tested similarly (some override Sleep, some use a MockSleep, etc).

Additionally, this change will allow new methods to be introduced to the SystemClock (like https://github.com/facebook/rocksdb/issues/7101 WaitFor) in a consistent manner across a smaller number of classes.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7858

Reviewed By: pdillinger

Differential Revision: D26006406

Pulled By: mrambacher

fbshipit-source-id: ed10a8abbdab7ff2e23d69d85bd25b3e7e899e90
2021-01-25 22:09:11 -08:00
Levi Tamasi
1afbd1948c Add initial blob support to batched MultiGet (#7766)
Summary:
The patch adds initial support for reading blobs to the batched `MultiGet` API.
The current implementation simply retrieves the blob values as the blob indexes
are encountered; that is, reads from blob files are currently not batched. (This
will be optimized in a separate phase.) In addition, the patch removes some dead
code related to BlobDB from the batched `MultiGet` implementation, namely the
`is_blob` / `is_blob_index` flags that are passed around in `DBImpl` and `MemTable` /
`MemTableListVersion`. These were never hooked up to anything and wouldn't
work anyways, since a single flag is not sufficient to communicate the "blobness"
of multiple key-values.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7766

Test Plan: `make check`

Reviewed By: jay-zhuang

Differential Revision: D25479290

Pulled By: ltamasi

fbshipit-source-id: 7aba2d290e31876ee592bcf1adfd1018713a8000
2020-12-14 13:48:22 -08:00
Andrew Kryczka
dd6b7fc520 Return Status from MemTable mutation functions (#7656)
Summary:
This PR updates `MemTable::Add()`, `MemTable::Update()`, and
`MemTable::UpdateCallback()` to return `Status` objects, and adapts the
client code in `MemTableInserter`. The goal is to prepare these
functions for key-value checksum, where we want to verify key-value
integrity while adding to memtable. After this PR, the memtable mutation
functions can report a failed integrity check by returning `Status::Corruption`.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7656

Reviewed By: riversand963

Differential Revision: D24900497

Pulled By: ajkr

fbshipit-source-id: 1a7e80581e3774676f2bbba2f0a0b04890f40009
2020-11-23 16:29:04 -08:00
Akanksha Mahajan
9d212d3f0e Provide users with option to opt-in to get corrupt data in logs/messages (#7420)
Summary:
Add a new Option "allow_data_in_errors". When it's set by users, it allows them to opt-in to get error messages containing corrupted keys/values. Corrupt keys, values will be logged in the messages, logs, status etc. that will help users with the useful information regarding affected data.
By default value is set false to prevent users data to be exposed in the messages.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7420

Test Plan:
1. make check -j64
           2. Add a new test case

Reviewed By: ajkr

Differential Revision: D23835028

Pulled By: akankshamahajan15

fbshipit-source-id: 8d2eba8fb898e79fcf1fccc07295065a75eb59b1
2020-09-29 23:17:45 -07:00
Huisheng Liu
904a60ff63 return timestamp from get (#6409)
Summary:
Added new Get() methods that return timestamp. Dummy implementation is given so that classes derived from DB don't need to be touched to provide their implementation. MultiGet is not included.

ReadRandom perf test (10 minutes) on the same development machine ram drive with the same DB data shows no regression (within marge of error). The test is adapted from https://github.com/facebook/rocksdb/wiki/RocksDB-In-Memory-Workload-Performance-Benchmarks.
    base line (commit 72ee067b9):
        101.712 micros/op 314602 ops/sec;   36.0 MB/s (5658999 of 5658999 found)
    This PR:
        100.288 micros/op 319071 ops/sec;   36.5 MB/s (5674999 of 5674999 found)

./db_bench --db=r:\rocksdb.github --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --cache_size=2147483648 --cache_numshardbits=6 --compression_type=none --compression_ratio=1 --min_level_to_compress=-1 --disable_seek_compaction=1 --hard_rate_limit=2 --write_buffer_size=134217728 --max_write_buffer_number=2 --level0_file_num_compaction_trigger=8 --target_file_size_base=134217728 --max_bytes_for_level_base=1073741824 --disable_wal=0 --wal_dir=r:\rocksdb.github\WAL_LOG --sync=0 --verify_checksum=1 --delete_obsolete_files_period_micros=314572800 --max_background_compactions=4 --max_background_flushes=0 --level0_slowdown_writes_trigger=16 --level0_stop_writes_trigger=24 --statistics=0 --stats_per_interval=0 --stats_interval=1048576 --histogram=0 --use_plain_table=1 --open_files=-1 --mmap_read=1 --mmap_write=0 --memtablerep=prefix_hash --bloom_bits=10 --bloom_locality=1 --duration=600 --benchmarks=readrandom --use_existing_db=1 --num=25000000 --threads=32
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6409

Differential Revision: D20200086

Pulled By: riversand963

fbshipit-source-id: 490edd74d924f62bd8ae9c29c2a6bbbb8410ca50
2020-03-02 16:01:00 -08:00
sdong
fdf882ded2 Replace namespace name "rocksdb" with ROCKSDB_NAMESPACE (#6433)
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433

Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.

Differential Revision: D19977691

fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
2020-02-20 12:09:57 -08:00
Levi Tamasi
bd8404feff Do not schedule memtable trimming if there is no history (#6177)
Summary:
We have observed an increase in CPU load caused by frequent calls to
`ColumnFamilyData::InstallSuperVersion` from `DBImpl::TrimMemtableHistory`
when using `max_write_buffer_size_to_maintain` to limit the amount of
memtable history maintained for transaction conflict checking. Part of the issue
is that trimming can potentially be scheduled even if there is no memtable
history. The patch adds a check that fixes this.

See also https://github.com/facebook/rocksdb/pull/6169.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6177

Test Plan:
Compared `perf` output for

```
./db_bench -benchmarks=randomtransaction -optimistic_transaction_db=1 -statistics -stats_interval_seconds=1 -duration=90 -num=500000 --max_write_buffer_size_to_maintain=16000000 --transaction_set_snapshot=1 --threads=32
```

before and after the change. There is a significant reduction for the call chain
`rocksdb::DBImpl::TrimMemtableHistory` -> `rocksdb::ColumnFamilyData::InstallSuperVersion` ->
`rocksdb::ThreadLocalPtr::StaticMeta::Scrape` even without https://github.com/facebook/rocksdb/pull/6169.

Differential Revision: D19057445

Pulled By: ltamasi

fbshipit-source-id: dff81882d7b280e17eda7d9b072a2d4882c50f79
2019-12-13 19:11:19 -08:00
Yi Wu
1f9d7c0f54 Fix OnFlushCompleted fired before flush result write to MANIFEST (#5908)
Summary:
When there are concurrent flush job on the same CF, `OnFlushCompleted` can be called before the flush result being install to LSM. Fixing the issue by passing `FlushJobInfo` through `MemTable`, and the thread who commit the flush result can fetch the `FlushJobInfo` and fire `OnFlushCompleted` on behave of the thread actually writing the SST.

Fix https://github.com/facebook/rocksdb/issues/5892
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5908

Test Plan: Add new test. The test will fail without the fix.

Differential Revision: D17916144

Pulled By: riversand963

fbshipit-source-id: e18df67d9533b5baee52ae3605026cdeb05cbe10
2019-10-16 10:40:23 -07:00
Vijay Nadimpalli
4c49e38f15 MultiGet batching in memtable (#5818)
Summary:
RocksDB has a MultiGet() API that implements batched key lookup for higher performance (https://github.com/facebook/rocksdb/blob/master/include/rocksdb/db.h#L468). Currently, batching is implemented in BlockBasedTableReader::MultiGet() for SST file lookups. One of the ways it improves performance is by pipelining bloom filter lookups (by prefetching required cachelines for all the keys in the batch, and then doing the probe) and thus hiding the cache miss latency. The same concept can be extended to the memtable as well. This PR involves implementing a pipelined bloom filter lookup in DynamicBloom, and implementing MemTable::MultiGet() that can leverage it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5818

Test Plan:
Existing tests

Performance Test:
Ran the below command which fills up the memtable and makes sure there are no flushes and then call multiget. Ran it on master and on the new change and see atleast 1% performance improvement across all the test runs I did. Sometimes the improvement was upto 5%.

TEST_TMPDIR=/data/users/$USER/benchmarks/feature/ numactl -C 10 ./db_bench -benchmarks="fillseq,multireadrandom" -num=600000 -compression_type="none" -level_compaction_dynamic_level_bytes -write_buffer_size=200000000 -target_file_size_base=200000000 -max_bytes_for_level_base=16777216 -reads=90000 -threads=1 -compression_type=none -cache_size=4194304000 -batch_size=32 -disable_auto_compactions=true -bloom_bits=10 -cache_index_and_filter_blocks=true -pin_l0_filter_and_index_blocks_in_cache=true -multiread_batched=true -multiread_stride=4 -statistics -memtable_whole_key_filtering=true -memtable_bloom_size_ratio=10

Differential Revision: D17578869

Pulled By: vjnadimpalli

fbshipit-source-id: 23dc651d9bf49db11d22375bf435708875a1f192
2019-10-10 09:39:39 -07:00
Lingjing You
1a928c22a0 Add insert hints for each writebatch (#5728)
Summary:
Add insert hints for each writebatch so that they can be used in concurrent write, and add write option to enable it.

Bench result (qps):

`./db_bench --benchmarks=fillseq -allow_concurrent_memtable_write=true -num=4000000 -batch-size=1 -threads=1 -db=/data3/ylj/tmp -write_buffer_size=536870912 -num_column_families=4`

master:

| batch size \ thread num | 1       | 2       | 4       | 8       |
| ----------------------- | ------- | ------- | ------- | ------- |
| 1                       | 387883  | 220790  | 308294  | 490998  |
| 10                      | 1397208 | 978911  | 1275684 | 1733395 |
| 100                     | 2045414 | 1589927 | 1798782 | 2681039 |
| 1000                    | 2228038 | 1698252 | 1839877 | 2863490 |

fillseq with writebatch hint:

| batch size \ thread num | 1       | 2       | 4       | 8       |
| ----------------------- | ------- | ------- | ------- | ------- |
| 1                       | 286005  | 223570  | 300024  | 466981  |
| 10                      | 970374  | 813308  | 1399299 | 1753588 |
| 100                     | 1962768 | 1983023 | 2676577 | 3086426 |
| 1000                    | 2195853 | 2676782 | 3231048 | 3638143 |
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5728

Differential Revision: D17297240

fbshipit-source-id: b053590a6d77871f1ef2f911a7bd013b3899b26c
2019-09-12 17:15:18 -07:00
Shylock Hg
9eb3e1f77d Use delete to disable automatic generated methods. (#5009)
Summary:
Use delete to disable automatic generated methods instead of private, and put the constructor together for more clear.This modification cause the unused field warning, so add unused attribute to disable this warning.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5009

Differential Revision: D17288733

fbshipit-source-id: 8a767ce096f185f1db01bd28fc88fef1cdd921f3
2019-09-11 18:09:00 -07:00
Zhongyi Xie
2f41ecfe75 Refactor trimming logic for immutable memtables (#5022)
Summary:
MyRocks currently sets `max_write_buffer_number_to_maintain` in order to maintain enough history for transaction conflict checking. The effectiveness of this approach depends on the size of memtables. When memtables are small, it may not keep enough history; when memtables are large, this may consume too much memory.
We are proposing a new way to configure memtable list history: by limiting the memory usage of immutable memtables. The new option is `max_write_buffer_size_to_maintain` and it will take precedence over the old `max_write_buffer_number_to_maintain` if they are both set to non-zero values. The new option accounts for the total memory usage of flushed immutable memtables and mutable memtable. When the total usage exceeds the limit, RocksDB may start dropping immutable memtables (which is also called trimming history), starting from the oldest one.
The semantics of the old option actually works both as an upper bound and lower bound. History trimming will start if number of immutable memtables exceeds the limit, but it will never go below (limit-1) due to history trimming.
In order the mimic the behavior with the new option, history trimming will stop if dropping the next immutable memtable causes the total memory usage go below the size limit. For example, assuming the size limit is set to 64MB, and there are 3 immutable memtables with sizes of 20, 30, 30. Although the total memory usage is 80MB > 64MB, dropping the oldest memtable will reduce the memory usage to 60MB < 64MB, so in this case no memtable will be dropped.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5022

Differential Revision: D14394062

Pulled By: miasantreble

fbshipit-source-id: 60457a509c6af89d0993f988c9b5c2aa9e45f5c5
2019-08-23 13:55:34 -07:00
Vijay Nadimpalli
d150e01474 New API to get all merge operands for a Key (#5604)
Summary:
This is a new API added to db.h to allow for fetching all merge operands associated with a Key. The main motivation for this API is to support use cases where doing a full online merge is not necessary as it is performance sensitive. Example use-cases:
1. Update subset of columns and read subset of columns -
Imagine a SQL Table, a row is encoded as a K/V pair (as it is done in MyRocks). If there are many columns and users only updated one of them, we can use merge operator to reduce write amplification. While users only read one or two columns in the read query, this feature can avoid a full merging of the whole row, and save some CPU.
2. Updating very few attributes in a value which is a JSON-like document -
Updating one attribute can be done efficiently using merge operator, while reading back one attribute can be done more efficiently if we don't need to do a full merge.
----------------------------------------------------------------------------------------------------
API :
Status GetMergeOperands(
      const ReadOptions& options, ColumnFamilyHandle* column_family,
      const Slice& key, PinnableSlice* merge_operands,
      GetMergeOperandsOptions* get_merge_operands_options,
      int* number_of_operands)

Example usage :
int size = 100;
int number_of_operands = 0;
std::vector<PinnableSlice> values(size);
GetMergeOperandsOptions merge_operands_info;
db_->GetMergeOperands(ReadOptions(), db_->DefaultColumnFamily(), "k1", values.data(), merge_operands_info, &number_of_operands);

Description :
Returns all the merge operands corresponding to the key. If the number of merge operands in DB is greater than merge_operands_options.expected_max_number_of_operands no merge operands are returned and status is Incomplete. Merge operands returned are in the order of insertion.
merge_operands-> Points to an array of at-least merge_operands_options.expected_max_number_of_operands and the caller is responsible for allocating it. If the status returned is Incomplete then number_of_operands will contain the total number of merge operands found in DB for key.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5604

Test Plan:
Added unit test and perf test in db_bench that can be run using the command:
./db_bench -benchmarks=getmergeoperands --merge_operator=sortlist

Differential Revision: D16657366

Pulled By: vjnadimpalli

fbshipit-source-id: 0faadd752351745224ee12d4ae9ef3cb529951bf
2019-08-06 14:26:44 -07:00
Siying Dong
8843129ece Move some memory related files from util/ to memory/ (#5382)
Summary:
Move arena, allocator, and memory tools under util to a separate memory/ directory.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5382

Differential Revision: D15564655

Pulled By: siying

fbshipit-source-id: 9cd6b5d0d3d52b39606e19221fa154596e5852a5
2019-05-30 17:44:09 -07:00
Zhongyi Xie
ed995c6a69 add whole key bloom filter support in memtables (#4985)
Summary:
MyRocks calls `GetForUpdate` on `INSERT`, for unique key check, and in almost all cases GetForUpdate returns empty result. For such cases, whole key bloom filter is helpful.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4985

Differential Revision: D14118257

Pulled By: miasantreble

fbshipit-source-id: d35cb7109c62fd5ad541a26968e3a3e16d3e85ea
2019-02-19 12:15:39 -08:00
Siying Dong
26a33ee5bd flush_job logs data size too (#4979)
Summary:
Right now when a flush is triggered, the memory consumption is logged but data size is not.
It's useful to log both when we debug unexpected small flushed file size.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4979

Differential Revision: D14071979

Pulled By: siying

fbshipit-source-id: 0cd60449c5205eb00e0fbc299084418f609904ed
2019-02-15 16:33:19 -08:00
Yanqin Jin
a07175af65 Refactor atomic flush result installation to MANIFEST (#4791)
Summary:
as titled.
Since different bg flush threads can flush different sets of column families
(due to column family creation and drop), we decide not to let one thread
perform atomic flush result installation for other threads. Bg flush threads
will install their atomic flush results sequentially to MANIFEST, using
a conditional variable, i.e. atomic_flush_install_cv_ to coordinate.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4791

Differential Revision: D13498930

Pulled By: riversand963

fbshipit-source-id: dd7482fc41f4bd22dad1e1ef7d4764ef424688d7
2019-01-03 20:56:24 -08:00
Abhishek Madan
02bfc5831e Change is_range_del_table_empty_ flag to atomic (#4801)
Summary:
To avoid a race on the flag, make it an atomic_bool. This
doesn't seem to significantly affect benchmarks.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4801

Differential Revision: D13523845

Pulled By: abhimadan

fbshipit-source-id: 3bc29f53c50a4e06cd9f8c6232a4bb221868e055
2018-12-19 17:21:14 -08:00
Abhishek Madan
8fe1e06ca0 Clean up FragmentedRangeTombstoneList (#4692)
Summary:
Removed `one_time_use` flag, which removed the need for some
tests, and changed all `NewRangeTombstoneIterator` methods to return
`FragmentedRangeTombstoneIterators`.

These changes also led to removing `RangeDelAggregatorV2::AddUnfragmentedTombstones`
and one of the `MemTableListVersion::AddRangeTombstoneIterators` methods.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4692

Differential Revision: D13106570

Pulled By: abhimadan

fbshipit-source-id: cbab5432d7fc2d9cdfd8d9d40361a1bffaa8f845
2018-11-28 15:29:02 -08:00
Sagar Vemuri
dc3528077a Update all unique/shared_ptr instances to be qualified with namespace std (#4638)
Summary:
Ran the following commands to recursively change all the files under RocksDB:
```
find . -type f -name "*.cc" -exec sed -i 's/ unique_ptr/ std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<unique_ptr/<std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/ shared_ptr/ std::shared_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<shared_ptr/<std::shared_ptr/g' {} +
```
Running `make format` updated some formatting on the files touched.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4638

Differential Revision: D12934992

Pulled By: sagar0

fbshipit-source-id: 45a15d23c230cdd64c08f9c0243e5183934338a8
2018-11-09 11:19:58 -08:00
Abhishek Madan
8c78348c77 Use only "local" range tombstones during Get (#4449)
Summary:
Previously, range tombstones were accumulated from every level, which
was necessary if a range tombstone in a higher level covered a key in a lower
level. However, RangeDelAggregator::AddTombstones's complexity is based on
the number of tombstones that are currently stored in it, which is wasteful in
the Get case, where we only need to know the highest sequence number of range
tombstones that cover the key from higher levels, and compute the highest covering
sequence number at the current level. This change introduces this optimization, and
removes the use of RangeDelAggregator from the Get path.

In the benchmark results, the following command was used to initialize the database:
```
./db_bench -db=/dev/shm/5k-rts -use_existing_db=false -benchmarks=filluniquerandom -write_buffer_size=1048576 -compression_type=lz4 -target_file_size_base=1048576 -max_bytes_for_level_base=4194304 -value_size=112 -key_size=16 -block_size=4096 -level_compaction_dynamic_level_bytes=true -num=5000000 -max_background_jobs=12 -benchmark_write_rate_limit=20971520 -range_tombstone_width=100 -writes_per_range_tombstone=100 -max_num_range_tombstones=50000 -bloom_bits=8
```

...and the following command was used to measure read throughput:
```
./db_bench -db=/dev/shm/5k-rts/ -use_existing_db=true -benchmarks=readrandom -disable_auto_compactions=true -num=5000000 -reads=100000 -threads=32
```

The filluniquerandom command was only run once, and the resulting database was used
to measure read performance before and after the PR. Both binaries were compiled with
`DEBUG_LEVEL=0`.

Readrandom results before PR:
```
readrandom   :       4.544 micros/op 220090 ops/sec;   16.9 MB/s (63103 of 100000 found)
```

Readrandom results after PR:
```
readrandom   :      11.147 micros/op 89707 ops/sec;    6.9 MB/s (63103 of 100000 found)
```

So it's actually slower right now, but this PR paves the way for future optimizations (see #4493).

----
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4449

Differential Revision: D10370575

Pulled By: abhimadan

fbshipit-source-id: 9a2e152be1ef36969055c0e9eb4beb0d96c11f4d
2018-10-24 12:31:12 -07:00
Yanqin Jin
e633983cf1 Add support to flush multiple CFs atomically (#4262)
Summary:
Leverage existing `FlushJob` to implement atomic flush of multiple column families.

This PR depends on other PRs and is a subset of #3752 . This PR itself is not sufficient in fulfilling atomic flush.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4262

Differential Revision: D9283109

Pulled By: riversand963

fbshipit-source-id: 65401f913e4160b0a61c0be6cd02adc15dad28ed
2018-10-15 20:01:17 -07:00
Gauresh Rane
ad789e4e0d Adding a method for memtable class for memtable getting flushed. (#4304)
Summary:
Memtables are selected for flushing by the flush job. Currently we
have listener which is invoked when memtables for a column family are
flushed. That listener does not indicate which memtable was flushed in
the notification. If clients want to know if particular data in the
memtable was retired, there is no straight forward way to know this.
This method will help users who implement memtablerep factory and extend
interface for memtablerep, to know if the data in the memtable was
retired.
Another option that was tried, was to depend on memtable destructor to
be called after flush to mark that data was persisted. This works all
the time but sometimes there can huge delays between actual flush
happening and memtable getting destroyed. Hence, if anyone who is
waiting for data to persist will have to wait that longer.
It is expected that anyone who is implementing this method to have
return quickly as it blocks RocksDB.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4304

Reviewed By: riversand963

Differential Revision: D9472312

Pulled By: gdrane

fbshipit-source-id: 8e693308dee749586af3a4c5d4fcf1fa5276ea4d
2018-08-23 17:14:25 -07:00
Maysam Yabandeh
caf0f53a74 Index value delta encoding (#3983)
Summary:
Given that index value is a BlockHandle, which is basically an <offset, size> pair we can apply delta encoding on the values. The first value at each index restart interval encoded the full BlockHandle but the rest encode only the size. Refer to IndexBlockIter::DecodeCurrentValue for the detail of the encoding. This reduces the index size which helps using the  block cache more efficiently. The feature is enabled with using format_version 4.

The feature comes with a bit of cpu overhead which should be paid back by the higher cache hits due to smaller index block size.
Results with sysbench read-only using 4k blocks and using 16 index restart interval:
Format 2:
19585   rocksdb read-only range=100
Format 3:
19569   rocksdb read-only range=100
Format 4:
19352   rocksdb read-only range=100
Pull Request resolved: https://github.com/facebook/rocksdb/pull/3983

Differential Revision: D8361343

Pulled By: maysamyabandeh

fbshipit-source-id: f882ee082322acac32b0072e2bdbb0b5f854e651
2018-08-09 16:58:40 -07:00
Radoslaw Zarzynski
09b6bf828a InlineSkiplist: don't decode keys unnecessarily during comparisons
Summary:
Summary
========
`InlineSkipList<>::Insert` takes the `key` parameter as a C-string. Then, it performs multiple comparisons with it requiring the `GetLengthPrefixedSlice()` to be spawn in `MemTable::KeyComparator::operator()(const char* prefix_len_key1, const char* prefix_len_key2)` on the same data over and over. The patch tries to optimize that.

Rough performance comparison
=====
Big keys, no compression.

```
$ ./db_bench --writes 20000000 --benchmarks="fillrandom" --compression_type none -key_size 256
(...)
fillrandom   :       4.222 micros/op 236836 ops/sec;   80.4 MB/s
```

```
$ ./db_bench --writes 20000000 --benchmarks="fillrandom" --compression_type none -key_size 256
(...)
fillrandom   :       4.064 micros/op 246059 ops/sec;   83.5 MB/s
```

TODO
======
In ~~a separated~~ this PR:
- [x] Go outside the write path. Maybe even eradicate the C-string-taking variant of `KeyIsAfterNode` entirely.
- [x] Try to cache the transformations applied by `KeyComparator` & friends in situations where we havy many comparisons with the same key.
Closes https://github.com/facebook/rocksdb/pull/3516

Differential Revision: D7059300

Pulled By: ajkr

fbshipit-source-id: 6f027dbb619a488129f79f79b5f7dbe566fb2dbb
2018-03-23 12:14:30 -07:00
Jingguo Yao
8823487ff7 doc: fix a typo
Summary:
s/synchromization/synchronization/
Closes https://github.com/facebook/rocksdb/pull/3583

Differential Revision: D7276596

Pulled By: sagar0

fbshipit-source-id: 552ec6d6935f642e1a3a7c552de6c94441ac50e0
2018-03-21 15:58:58 -07:00
Maysam Yabandeh
813719e952 WritePrepared Txn: Duplicate Keys, Memtable part
Summary:
Currently DB does not accept duplicate keys (keys with the same user key and the same sequence number). If Memtable returns false when receiving such keys, we can benefit from this signal to properly increase the sequence number in the rare cases when we have a duplicate key in the write batch written to DB under WritePrepared transactions.
Closes https://github.com/facebook/rocksdb/pull/3418

Differential Revision: D6822412

Pulled By: maysamyabandeh

fbshipit-source-id: adea3ce5073131cd38ed52b16bea0673b1a19e77
2018-01-31 18:57:07 -08:00
Yi Wu
f1cb83fcf4 Fix Flush() keep waiting after flush finish
Summary:
Flush() call could be waiting indefinitely if min_write_buffer_number_to_merge is used. Consider the sequence:
1. User call Flush() with flush_options.wait = true
2. The manual flush started in the background
3. New memtable become immutable because of writes. The new memtable will not trigger flush if min_write_buffer_number_to_merge is not reached.
4. The manual flush finish.

Because of the new memtable created at step 3 not being flush, previous logic of WaitForFlushMemTable() keep waiting, despite the memtables it intent to flush has been flushed.

Here instead of checking if there are any more memtables to flush, WaitForFlushMemTable() also check the id of the earliest memtable. If the id is larger than that of latest memtable at the time flush was initiated, it means all the memtable at the time of flush start has all been flush.
Closes https://github.com/facebook/rocksdb/pull/3378

Differential Revision: D6746789

Pulled By: yiwu-arbug

fbshipit-source-id: 35e698f71c7f90b06337a93e6825f4ea3b619bfa
2018-01-18 17:45:16 -08:00
Andrew Kryczka
c4c1f961e7 dynamically change current memtable size
Summary:
Previously setting `write_buffer_size` with `SetOptions` would only apply to new memtables. An internal user wanted it to take effect immediately, instead of at an arbitrary future point, to prevent OOM.

This PR makes the memtable's size mutable, and makes `SetOptions()` mutate it. There is one case when we preserve the old behavior, which is when memtable prefix bloom filter is enabled and the user is increasing the memtable's capacity. That's because the prefix bloom filter's size is fixed and wouldn't work as well on a larger memtable.
Closes https://github.com/facebook/rocksdb/pull/3119

Differential Revision: D6228304

Pulled By: ajkr

fbshipit-source-id: e44bd9d10a5f8c9d8c464bf7436070bb3eafdfc9
2017-11-02 22:28:10 -07:00
Yi Wu
66a2c44ef4 Add DB::Properties::kEstimateOldestKeyTime
Summary:
With FIFO compaction we would like to get the oldest data time for monitoring. The problem is we don't have timestamp for each key in the DB. As an approximation, we expose the earliest of sst file "creation_time" property.

My plan is to override the property with a more accurate value with blob db, where we actually have timestamp.
Closes https://github.com/facebook/rocksdb/pull/2842

Differential Revision: D5770600

Pulled By: yiwu-arbug

fbshipit-source-id: 03833c8f10bbfbee62f8ea5c0d03c0cafb5d853a
2017-10-23 15:27:27 -07:00
Yi Wu
d1cab2b64e Add ValueType::kTypeBlobIndex
Summary:
Add kTypeBlobIndex value type, which will be used by blob db only, to insert a (key, blob_offset) KV pair. The purpose is to
1. Make it possible to open existing rocksdb instance as blob db. Existing value will be of kTypeIndex type, while value inserted by blob db will be of kTypeBlobIndex.
2. Make rocksdb able to detect if the db contains value written by blob db, if so return error.
3. Make it possible to have blob db optionally store value in SST file (with kTypeValue type) or as a blob value (with kTypeBlobIndex type).

The root db (DBImpl) basically pretended kTypeBlobIndex are normal value on write. On Get if is_blob is provided, return whether the value read is of kTypeBlobIndex type, or return Status::NotSupported() status if is_blob is not provided. On scan allow_blob flag is pass and if the flag is true, return wether the value is of kTypeBlobIndex type via iter->IsBlob().

Changes on blob db side will be in a separate patch.
Closes https://github.com/facebook/rocksdb/pull/2886

Differential Revision: D5838431

Pulled By: yiwu-arbug

fbshipit-source-id: 3c5306c62bc13bb11abc03422ec5cbcea1203cca
2017-10-03 09:11:23 -07:00
Maysam Yabandeh
f46464d383 write-prepared txn: call IsInSnapshot
Summary:
This patch instruments the read path to verify each read value against an optional ReadCallback class. If the value is rejected, the reader moves on to the next value. The WritePreparedTxn makes use of this feature to skip sequence numbers that are not in the read snapshot.
Closes https://github.com/facebook/rocksdb/pull/2850

Differential Revision: D5787375

Pulled By: maysamyabandeh

fbshipit-source-id: 49d808b3062ab35e7ae98ad388f659757794184c
2017-09-11 09:14:48 -07:00
Siying Dong
3c327ac2d0 Change RocksDB License
Summary: Closes https://github.com/facebook/rocksdb/pull/2589

Differential Revision: D5431502

Pulled By: siying

fbshipit-source-id: 8ebf8c87883daa9daa54b2303d11ce01ab1f6f75
2017-07-15 16:11:23 -07:00
Siying Dong
95b0e89b5d Improve write buffer manager (and allow the size to be tracked in block cache)
Summary:
Improve write buffer manager in several ways:
1. Size is tracked when arena block is allocated, rather than every allocation, so that it can better track actual memory usage and the tracking overhead is slightly lower.
2. We start to trigger memtable flush when 7/8 of the memory cap hits, instead of 100%, and make 100% much harder to hit.
3. Allow a cache object to be passed into buffer manager and the size allocated by memtable can be costed there. This can help users have one single memory cap across block cache and memtable.
Closes https://github.com/facebook/rocksdb/pull/2350

Differential Revision: D5110648

Pulled By: siying

fbshipit-source-id: b4238113094bf22574001e446b5d88523ba00017
2017-06-02 14:26:56 -07:00
Andrew Kryczka
a4d9c02511 Pass CF ID to MemTableRepFactory
Summary:
Some users want to monitor column family activity in their custom memtable implementations. Previously there was no way to figure out with which column family a memtable is associated. This diff:

- adds an overload to MemTableRepFactory::CreateMemTableRep() that provides the CF ID. For compatibility, its default implementation calls the old overload.
- updates MemTable to create MemTableRep's using the new overload.
Closes https://github.com/facebook/rocksdb/pull/2346

Differential Revision: D5108061

Pulled By: ajkr

fbshipit-source-id: 3a1921214a348dd8ea0f54e1cab3b71c3d46d616
2017-06-02 12:12:06 -07:00
Siying Dong
d616ebea23 Add GPLv2 as an alternative license.
Summary: Closes https://github.com/facebook/rocksdb/pull/2226

Differential Revision: D4967547

Pulled By: siying

fbshipit-source-id: dd3b58ae1e7a106ab6bb6f37ab5c88575b125ab4
2017-04-27 18:06:12 -07:00
Yi Wu
df6f5a3772 Move memtable related files into memtable directory
Summary:
Move memtable related files into memtable directory.
Closes https://github.com/facebook/rocksdb/pull/2087

Differential Revision: D4829242

Pulled By: yiwu-arbug

fbshipit-source-id: ca70ab6
2017-04-06 14:09:13 -07:00
Siying Dong
d2dce5611a Move some files under util/ to separate dirs
Summary:
Move some files under util/ to new directories env/, monitoring/ options/ and cache/
Closes https://github.com/facebook/rocksdb/pull/2090

Differential Revision: D4833681

Pulled By: siying

fbshipit-source-id: 2fd8bef
2017-04-05 19:09:16 -07:00
Siying Dong
8f5bf04468 Flush triggered by DB write buffer size picks the oldest unflushed CF
Summary:
Previously, when DB write buffer size triggers, we always pick the CF with most data in its memtable to flush. This approach can minimize total flush happens. Change the behavior to always pick the oldest unflushed CF, which makes it the same behavior when max_total_wal_size hits. This approach will minimize size used by max_total_wal_size.
Closes https://github.com/facebook/rocksdb/pull/1987

Differential Revision: D4703214

Pulled By: siying

fbshipit-source-id: 9ff8b09
2017-03-21 11:09:10 -07:00
Vitaliy Liptchinsky
1aaa898cf1 Adding GetApproximateMemTableStats method
Summary:
Added method that returns approx num of entries as well as size for memtables.
Closes https://github.com/facebook/rocksdb/pull/1841

Differential Revision: D4511990

Pulled By: VitaliyLi

fbshipit-source-id: 9a4576e
2017-02-06 14:54:16 -08:00
Maysam Yabandeh
d0ba8ec8f9 Revert "PinnableSlice"
Summary:
This reverts commit 54d94e9c2c.

The pull request was landed by mistake.
Closes https://github.com/facebook/rocksdb/pull/1755

Differential Revision: D4391678

Pulled By: maysamyabandeh

fbshipit-source-id: 36d5149
2017-01-08 14:24:12 -08:00
Maysam Yabandeh
54d94e9c2c PinnableSlice
Summary:
Currently the point lookup values are copied to a string provided by the user.
This incures an extra memcpy cost. This patch allows doing point lookup
via a PinnableSlice which pins the source memory location (instead of
copying their content) and releases them after the content is consumed
by the user. The old API of Get(string) is translated to the new API
underneath.

 Here is the summary for improvements:
 1. value 100 byte: 1.8%  regular, 1.2% merge values
 2. value 1k   byte: 11.5% regular, 7.5% merge values
 3. value 10k byte: 26% regular,    29.9% merge values

 The improvement for merge could be more if we extend this approach to
 pin the merge output and delay the full merge operation until the user
 actually needs it. We have put that for future work.

PS:
Sometimes we observe a small decrease in performance when switching from
t5452014 to this patch but with the old Get(string) API. The difference
is a little and could be noise. More importantly it is safely
cancelled
Closes https://github.com/facebook/rocksdb/pull/1732

Differential Revision: D4374613

Pulled By: maysamyabandeh

fbshipit-source-id: a077f1a
2017-01-08 13:54:13 -08:00
Andrew Kryczka
fd43ee09da Range deletion microoptimizations
Summary:
- Made RangeDelAggregator's InternalKeyComparator member a reference-to-const so we don't need to copy-construct it. Also added InternalKeyComparator to ImmutableCFOptions so we don't need to construct one for each DBIter.
- Made MemTable::NewRangeTombstoneIterator and the table readers' NewRangeTombstoneIterator() functions return nullptr instead of NewEmptyInternalIterator to avoid the allocation. Updated callers accordingly.
Closes https://github.com/facebook/rocksdb/pull/1548

Differential Revision: D4208169

Pulled By: ajkr

fbshipit-source-id: 2fd65cf
2016-11-21 12:24:13 -08:00
Andrew Kryczka
fe349db57b Remove Arena in RangeDelAggregator
Summary:
The Arena construction/destruction introduced significant overhead to read-heavy workload just by creating empty vectors for its blocks, so avoid it in RangeDelAggregator.
Closes https://github.com/facebook/rocksdb/pull/1547

Differential Revision: D4207781

Pulled By: ajkr

fbshipit-source-id: 9d1c130
2016-11-19 14:24:12 -08:00
Yi Wu
1ea79a78c9 Optimize sequential insert into memtable - Part 1: Interface
Summary:
Currently our skip-list have an optimization to speedup sequential
inserts from a single stream, by remembering the last insert position.
We extend the idea to support sequential inserts from multiple streams,
and even tolerate small reordering wihtin each stream.

This PR is the interface part adding the following:
- Add `memtable_insert_prefix_extractor` to allow specifying prefix for each key.
- Add `InsertWithHint()` interface to memtable, to allow underlying
  implementation to return a hint of insert position, which can be later
  pass back to optimize inserts.
- Memtable will maintain a map from prefix to hints and pass the hint
  via `InsertWithHint()` if `memtable_insert_prefix_extractor` is non-null.
Closes https://github.com/facebook/rocksdb/pull/1419

Differential Revision: D4079367

Pulled By: yiwu-arbug

fbshipit-source-id: 3555326
2016-11-13 19:09:18 -08:00
Andrew Kryczka
f998c9790f DeleteRange Get support
Summary:
During Get()/MultiGet(), build up a RangeDelAggregator with range
tombstones as we search through live memtable, immutable memtables, and
SST files. This aggregator is then used by memtable.cc's SaveValue() and
GetContext::SaveValue() to check whether keys are covered.

added tests for Get on memtables/files; end-to-end tests mainly in https://reviews.facebook.net/D64761
Closes https://github.com/facebook/rocksdb/pull/1456

Differential Revision: D4111271

Pulled By: ajkr

fbshipit-source-id: 6e388d4
2016-11-03 18:54:20 -07:00
Andrew Kryczka
6009c473c7 Store range tombstones in memtable
Summary:
- Store range tombstones in a separate MemTableRep instantiated with ColumnFamilyOptions::memtable_factory
- MemTable::NewRangeTombstoneIterator() returns a MemTableIterator over the separate MemTableRep
- Part of the read path is not implemented yet (i.e., MemTable::Get())

Test Plan: see unit tests

Reviewers: wanning

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D62217
2016-09-30 09:06:43 -07:00
Yi Wu
a88677d2cf Remove ImmutableCFOptions from public API
Summary: There's no reference to ImmutableCFOptions elsewhere in /include/rocksdb. ImmutableCFOptions was introduced in this commit (5665e5e285) but later its reference in /include/rocksdb/table.h is removed.

Test Plan:
  make all check

Reviewers: IslamAbdelRahman, sdong, yhchiang

Reviewed By: yhchiang

Subscribers: yhchiang, andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D63177
2016-09-02 14:16:31 -07:00