Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9266
This diff adds a new tag `CommitWithTimestamp`. Currently, there is no API to trigger writing
this tag to WAL, thus it is unavailable to users.
This is an ongoing effort to add user-defined timestamp support to write-committed transactions.
This diff also indicates all column families that may potentially participate in the same
transaction must either disable timestamp or have the same timestamp format, since
`CommitWithTimestamp` tag is followed by a single byte-array denoting the commit
timestamp of the transaction. We will enforce this checking in a future diff. We keep this
diff small.
Reviewed By: ltamasi
Differential Revision: D31721350
fbshipit-source-id: e1450811443647feb6ca01adec4c8aaae270ffc6
Summary:
When table_options.prepopulate_block_cache is set to
BlockBasedTableOptions::PrepopulateBlockCache::kFlushOnly and
table_options.partition_filters is also set true, then there is
segmentation failure when top level filter is fetched because its
entered with wrong type in cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9263
Test Plan:
Updated unit tests;
Ran db_stress: make crash_test -j32
Reviewed By: pdillinger
Differential Revision: D32936566
Pulled By: akankshamahajan15
fbshipit-source-id: 8bd79e53830d3e3c1bb79787e1ffbc3cb46d4426
Summary:
Fix a bug that causes file temperature not preserved after DB is restarted, or options.max_manifest_file_size is hit.
Also, pass temperature information to NewRandomAccessFile() to allow users to hack a solution where they don't preserve tiering information.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9242
Test Plan: Add a unit test that would fail without the fix.
Reviewed By: jay-zhuang
Differential Revision: D32818150
fbshipit-source-id: 36aa3f148c60107f7b8e9d65b63b039f9e1a1eec
Summary:
Disable the QPS verification in test temporally, which causes the test failure due to different system delays.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9190
Test Plan: make check
Reviewed By: siying
Differential Revision: D32576289
Pulled By: zhichao-cao
fbshipit-source-id: 1df972e77dd82eed5af3462e5db5e141aadf8fae
Summary:
The patch adds a new BlobDB configuration option `blob_compaction_readahead_size`
that can be used to enable prefetching data from blob files during compaction.
This is important when using storage with higher latencies like HDDs or remote filesystems.
If enabled, prefetching is used for all cases when blobs are read during compaction,
namely garbage collection, compaction filters (when the existing value has to be read from
a blob file), and `Merge` (when the value of the base `Put` is stored in a blob file).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9187
Test Plan: Ran `make check` and the stress/crash test.
Reviewed By: riversand963
Differential Revision: D32565512
Pulled By: ltamasi
fbshipit-source-id: 87be9cebc3aa01cc227bec6b5f64d827b8164f5d
Summary:
Fix the analyzer test failure caused by inaccurate timing wait. The wait time at different system might be different or cause the delay, now we do not accurately count the lines. Only in a very rare extreme case, test will ignore the part exceed the timing of 1 second.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9181
Test Plan: make check
Reviewed By: pdillinger
Differential Revision: D32511319
Pulled By: zhichao-cao
fbshipit-source-id: e694c8cb465c750cfa5a43dab3eff6707b9a11c8
Summary:
RocksDB does auto-readahead for iterators on noticing more than two sequential reads for a table file if user doesn't provide readahead_size. The readahead starts at 8KB and doubles on every additional read up to max_auto_readahead_size. However at each level, if iterator moves over next file, readahead_size starts again from 8KB.
This PR introduces a new ReadOption "adaptive_readahead" which when set true will maintain readahead_size at each level. So when iterator moves from one file to another, new file's readahead_size will continue from previous file's readahead_size instead of scratch. However if reads are not sequential it will fall back to 8KB (default) with no prefetching for that block.
1. If block is found in cache but it was eligible for prefetch (block wasn't in Rocksdb's prefetch buffer), readahead_size will decrease by 8KB.
2. It maintains readahead_size for L1 - Ln levels.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9056
Test Plan:
Added new unit tests
Ran db_bench for "readseq, seekrandom, seekrandomwhilewriting, readrandom" with --adaptive_readahead=true and there was no regression if new feature is enabled.
Reviewed By: anand1976
Differential Revision: D31773640
Pulled By: akankshamahajan15
fbshipit-source-id: 7332d16258b846ae5cea773009195a5af58f8f98
Summary:
Allow compaction_job_test, db_io_failure_test, dbformat_test, deletefile_test, and fault_injection_test to use a custom Env object. Also move ```RegisterCustomObjects``` declaration to a header file to simplify things.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9087
Test Plan: Run manually using "buck test rocksdb/src:compaction_job_test_fbcode" etc.
Reviewed By: riversand963
Differential Revision: D32007222
Pulled By: anand1976
fbshipit-source-id: 99af58559e25bf61563dfa95dc46e31fa7375792
Summary:
It is useful to add options.manual_wal_flush to db_bench
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9132
Test Plan: Run the benchamrk with the option.
Reviewed By: ltamasi
Differential Revision: D32188060
fbshipit-source-id: a70835d3cad0f30095218dfda1daff0a432892e5
Summary:
Right now, when options.ttl is set, compactions are triggered around the time when TTL is reached. This might cause extra compactions which are often bursty. This commit tries to mitigate it by picking those files earlier in normal compaction picking process. This is only implemented using kMinOverlappingRatio with Leveled compaction as it is the default value and it is more complicated to change other styles.
When a file is aged more than ttl/2, RocksDB starts to boost the compaction priority of files in normal compaction picking process, and hope by the time TTL is reached, very few extra compaction is needed.
In order for this to work, another change is made: during a compaction, if an output level file is older than ttl/2, cut output files based on original boundary (if it is not in the last level). This is to make sure that after an old file is moved to the next level, and new data is merged from the upper level, the new data falling into this range isn't reset with old timestamp. Without this change, in many cases, most files from one level will keep having old timestamp, even if they have newer data and we stuck in it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8749
Test Plan: Add a unit test to test the boosting logic. Will add a unit test to test it end-to-end.
Reviewed By: jay-zhuang
Differential Revision: D30735261
fbshipit-source-id: 503c2d89250b22911eb99e72b379be154de3428e
Summary:
XXH3 - latest hash function that is extremely fast on large
data, easily faster than crc32c on most any x86_64 hardware. In
integrating this hash function, I have handled the compression type byte
in a non-standard way to avoid using the streaming API (extra data
movement and active code size because of hash function complexity). This
approach got a thumbs-up from Yann Collet.
Existing functionality change:
* reject bad ChecksumType in options with InvalidArgument
This change split off from https://github.com/facebook/rocksdb/issues/9058 because context-aware checksum is
likely to be handled through different configuration than ChecksumType.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9069
Test Plan:
tests updated, and substantially expanded. Unit tests now check
that we don't accidentally change the values generated by the checksum
algorithms ("schema test") and that we properly handle
invalid/unrecognized checksum types in options or in file footer.
DBTestBase::ChangeOptions (etc.) updated from two to one configuration
changing from default CRC32c ChecksumType. The point of this test code
is to detect possible interactions among features, and the likelihood of
some bad interaction being detected by including configurations other
than XXH3 and CRC32c--and then not detected by stress/crash test--is
extremely low.
Stress/crash test also updated (manual run long enough to see it accepts
new checksum type). db_bench also updated for microbenchmarking
checksums.
### Performance microbenchmark (PORTABLE=0 DEBUG_LEVEL=0, Broadwell processor)
./db_bench -benchmarks=crc32c,xxhash,xxhash64,xxh3,crc32c,xxhash,xxhash64,xxh3,crc32c,xxhash,xxhash64,xxh3
crc32c : 0.200 micros/op 5005220 ops/sec; 19551.6 MB/s (4096 per op)
xxhash : 0.807 micros/op 1238408 ops/sec; 4837.5 MB/s (4096 per op)
xxhash64 : 0.421 micros/op 2376514 ops/sec; 9283.3 MB/s (4096 per op)
xxh3 : 0.171 micros/op 5858391 ops/sec; 22884.3 MB/s (4096 per op)
crc32c : 0.206 micros/op 4859566 ops/sec; 18982.7 MB/s (4096 per op)
xxhash : 0.793 micros/op 1260850 ops/sec; 4925.2 MB/s (4096 per op)
xxhash64 : 0.410 micros/op 2439182 ops/sec; 9528.1 MB/s (4096 per op)
xxh3 : 0.161 micros/op 6202872 ops/sec; 24230.0 MB/s (4096 per op)
crc32c : 0.203 micros/op 4924686 ops/sec; 19237.1 MB/s (4096 per op)
xxhash : 0.839 micros/op 1192388 ops/sec; 4657.8 MB/s (4096 per op)
xxhash64 : 0.424 micros/op 2357391 ops/sec; 9208.6 MB/s (4096 per op)
xxh3 : 0.162 micros/op 6182678 ops/sec; 24151.1 MB/s (4096 per op)
As you can see, especially once warmed up, xxh3 is fastest.
### Performance macrobenchmark (PORTABLE=0 DEBUG_LEVEL=0, Broadwell processor)
Test
for I in `seq 1 50`; do for CHK in 0 1 2 3 4; do TEST_TMPDIR=/dev/shm/rocksdb$CHK ./db_bench -benchmarks=fillseq -memtablerep=vector -allow_concurrent_memtable_write=false -num=30000000 -checksum_type=$CHK 2>&1 | grep 'micros/op' | tee -a results-$CHK & done; wait; done
Results (ops/sec)
for FILE in results*; do echo -n "$FILE "; awk '{ s += $5; c++; } END { print 1.0 * s / c; }' < $FILE; done
results-0 252118 # kNoChecksum
results-1 251588 # kCRC32c
results-2 251863 # kxxHash
results-3 252016 # kxxHash64
results-4 252038 # kXXH3
Reviewed By: mrambacher
Differential Revision: D31905249
Pulled By: pdillinger
fbshipit-source-id: cb9b998ebe2523fc7c400eedf62124a78bf4b4d1
Summary:
This commit introduces incremental compaction in univeral style for space amplification. This follows the first improvement mentioned in https://rocksdb.org/blog/2021/04/12/universal-improvements.html . The implemention simply picks up files about size of max_compaction_bytes to compact and execute if the penalty is not too big. More optimizations can be done in the future, e.g. prioritizing between this compaction and other types. But for now, the feature is supposed to be functional and can often reduce frequency of full compactions, although it can introduce penalty.
In order to add cut files more efficiently so that more files from upper levels can be included, SST file cutting threshold (for current file + overlapping parent level files) is set to 1.5X of target file size. A 2MB target file size will generate files like this: https://gist.github.com/siying/29d2676fba417404f3c95e6c013c7de8 Number of files indeed increases but it is not out of control.
Two set of write benchmarks are run:
1. For ingestion rate limited scenario, we can see full compaction is mostly eliminated: https://gist.github.com/siying/959bc1186066906831cf4c808d6e0a19 . The write amp increased from 7.7 to 9.4, as expected. After applying file cutting, the number is improved to 8.9. In another benchmark, the write amp is even better with the incremental approach: https://gist.github.com/siying/d1c16c286d7c59c4d7bba718ca198163
2. For ingestion rate unlimited scenario, incremental compaction turns out to be too expensive most of the time and is not executed, as expected.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8655
Test Plan: Add unit tests to the functionality.
Reviewed By: ajkr
Differential Revision: D31787034
fbshipit-source-id: ce813e63b15a61d5a56e97bf8902a1b28e011beb
Summary:
https://github.com/facebook/rocksdb/issues/8031 broke internal tests. This should fix but also preserve
the intended capability of getting git commit id when hg not used
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9047
Test Plan: already broken ¯\\_(ツ)_/¯
Reviewed By: zhichao-cao
Differential Revision: D31732198
Pulled By: pdillinger
fbshipit-source-id: 7dba8531ddca55a6de5e04978a1a1601aae4cee9
Summary:
Set the perf_level in ```tools/regression_test.sh``` in order to exercise ```PerfContext``` counters in regression tests.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8031
Test Plan: Manually run the script
Reviewed By: ajkr
Differential Revision: D31508269
Pulled By: anand1976
fbshipit-source-id: 20ddfd1cbca37f1439eed2870086a86d90653b44
Summary:
The patch adds a new BlobDB benchmarking script called `run_blob_bench.sh`.
It is a thin wrapper around `benchmark.sh` (similarly to `run_flash_bench.sh`):
it actually calls `benchmark.sh` a number of times, cycling through six workloads,
two write-only ones (bulk load and overwrite), two read/write ones (point lookups
while writing, range scans while writing), and two read-only ones (point lookups
and range scans).
Note: this is a simpler/cleaned up/reworked version of the script used to produce the
benchmark results in http://rocksdb.org/blog/2021/05/26/integrated-blob-db.html .
The new version takes advantage of several recent `benchmark.sh` improvements
like the ability to pass in arbitrary `db_bench` options or the possibility of using a
job ID.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9015
Test Plan: Ran the script manually with different parameter combinations.
Reviewed By: riversand963
Differential Revision: D31555277
Pulled By: ltamasi
fbshipit-source-id: 0e151b2f7b2cf6f66ed7f95455571492ad7ea87f
Summary:
The current BlobDB garbage collection logic works by relocating the valid
blobs from the oldest blob files as they are encountered during compaction,
and cleaning up blob files once they contain nothing but garbage. However,
with sufficiently skewed workloads, it is theoretically possible to end up in a
situation when few or no compactions get scheduled for the SST files that contain
references to the oldest blob files, which can lead to increased space amp due
to the lack of GC.
In order to efficiently handle such workloads, the patch adds a new BlobDB
configuration option called `blob_garbage_collection_force_threshold`,
which signals to BlobDB to schedule targeted compactions for the SST files
that keep alive the oldest batch of blob files if the overall ratio of garbage in
the given blob files meets the threshold *and* all the given blob files are
eligible for GC based on `blob_garbage_collection_age_cutoff`. (For example,
if the new option is set to 0.9, targeted compactions will get scheduled if the
sum of garbage bytes meets or exceeds 90% of the sum of total bytes in the
oldest blob files, assuming all affected blob files are below the age-based cutoff.)
The net result of these targeted compactions is that the valid blobs in the oldest
blob files are relocated and the oldest blob files themselves cleaned up (since
*all* SST files that rely on them get compacted away).
These targeted compactions are similar to periodic compactions in the sense
that they force certain SST files that otherwise would not get picked up to undergo
compaction and also in the sense that instead of merging files from multiple levels,
they target a single file. (Note: such compactions might still include neighboring files
from the same level due to the need of having a "clean cut" boundary but they never
include any files from any other level.)
This functionality is currently only supported with the leveled compaction style
and is inactive by default (since the default value is set to 1.0, i.e. 100%).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8994
Test Plan: Ran `make check` and tested using `db_bench` and the stress/crash tests.
Reviewed By: riversand963
Differential Revision: D31489850
Pulled By: ltamasi
fbshipit-source-id: 44057d511726a0e2a03c5d9313d7511b3f0c4eab
Summary:
`FaultInjectionTest{Env,FS}::ReopenWritableFile()` functions were accidentally deleting WALs from previous `db_stress` runs causing verification to fail. They were operating under the assumption that `ReopenWritableFile()` would delete any existing file. It was a reasonable assumption considering the `{Env,FileSystem}::ReopenWritableFile()` documentation stated that would happen. The only problem was neither the implementations we offer nor the "real" clients in RocksDB code followed that contract. So, this PR updates the contract as well as fixing the fault injection client usage.
The fault injection change exposed that `ExternalSSTFileBasicTest.SyncFailure` was relying on a fault injection `Env` dropping unsynced data written by a regular `Env`. I changed that test to make its `SstFileWriter` use fault injection `Env`, and also implemented `LinkFile()` in fault injection so the unsynced data is tracked under the new name.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8995
Test Plan:
- Verified it fixes the following failure:
```
$ ./db_stress --clear_column_family_one_in=0 --column_families=1 --db=/dev/shm/rocksdb_crashtest_whitebox --delpercent=5 --expected_values_dir=/dev/shm/rocksdb_crashtest_expected --iterpercent=0 --key_len_percent_dist=1,30,69 --max_key=100000 --max_key_len=3 --nooverwritepercent=1 --ops_per_thread=1000 --prefixpercent=0 --readpercent=60 --reopen=0 --target_file_size_base=1048576 --test_batches_snapshots=0 --write_buffer_size=1048576 --writepercent=35 --value_size_mult=33 -threads=1
...
$ ./db_stress --avoid_flush_during_recovery=1 --clear_column_family_one_in=0 --column_families=1 --db=/dev/shm/rocksdb_crashtest_whitebox --delpercent=5 --destroy_db_initially=0 --expected_values_dir=/dev/shm/rocksdb_crashtest_expected --iterpercent=10 --key_len_percent_dist=1,30,69 --max_bytes_for_level_base=4194304 --max_key=100000 --max_key_len=3 --nooverwritepercent=1 --open_files=-1 --open_metadata_write_fault_one_in=8 --open_write_fault_one_in=16 --ops_per_thread=1000 --prefix_size=-1 --prefixpercent=0 --readpercent=50 --sync=1 --target_file_size_base=1048576 --test_batches_snapshots=0 --write_buffer_size=1048576 --writepercent=35 --value_size_mult=33 -threads=1
...
Verification failed for column family 0 key 000000000000001300000000000000857878787878 (1143): Value not found: NotFound:
Crash-recovery verification failed :(
...
```
- `make check -j48`
Reviewed By: ltamasi
Differential Revision: D31495388
Pulled By: ajkr
fbshipit-source-id: 7886ccb6a07cb8b78ad7b6c1c341ccf40bb68385
Summary:
Enable SingleDelete with user defined timestamp in db_bench,
db_stress and crash test
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8971
Test Plan:
1. For db_stress, ran the command for full duration: i) python3 -u tools/db_crashtest.py
--enable_ts whitebox --nooverwritepercent=100
ii) make crash_test_with_ts
2. For db_bench, ran: ./db_bench -benchmarks=randomreplacekeys
-user_timestamp_size=8 -use_single_deletes=true
Reviewed By: riversand963
Differential Revision: D31246558
Pulled By: akankshamahajan15
fbshipit-source-id: 29cd8740c9921341e52f09242fca3c44d75a12b7
Summary:
The ldb list_live_files_metadata command does not print any information about blob files currently. We would like to add this functionality. Note that list_live_files_metadata has two different modes of operation: the one shown above, which shows the LSM tree structure, and another one, which can be enabled using the flag --sort_by_filename and simply lists the files in numerical order regardless of level. We would like to show blob files in both modes.
Changes:
1. Using GetAllColumnFamilyMetaData API instead of GetLiveFilesMetaData API for fetching live files data.
Testing:
1. Created a sample rocksdb instance using dbbench command (this creates both SST and blob files)
2. Checked if the blob files are listed or not by using ldb commands.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8976
Reviewed By: ltamasi
Differential Revision: D31316061
Pulled By: pradeepambati
fbshipit-source-id: d15cdea192febf7a45f28deee2ba40615d3d84ab
Summary:
This header file was including everything and the kitchen sink when it did not need to. This resulted in many places including this header when they needed other pieces instead.
Cleaned up this header to only include what was needed and fixed up the remaining code to include what was now missing.
Hopefully, this sort of code hygiene cleanup will speed up the builds...
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8930
Reviewed By: pdillinger
Differential Revision: D31142788
Pulled By: mrambacher
fbshipit-source-id: 6b45de3f300750c79f751f6227dece9cfd44085d
Summary:
This is a precursor refactoring to enable an upcoming feature: persistence failure correctness testing.
- Changed `--expected_values_path` to `--expected_values_dir` and migrated "db_crashtest.py" to use the new flag. For persistence failure correctness testing there are multiple possible correct states since unsynced data is allowed to be dropped. Making it possible to restore all these possible correct states will eventually involve files containing snapshots of expected values and DB trace files.
- The expected values directory is managed by an `ExpectedStateManager` instance. Managing expected state files is separated out of `SharedState` to prevent `SharedState` from becoming too complex when the new files and features (snapshotting, tracing, and restoring) are introduced.
- Migrated expected values file access/management out of `SharedState` into a separate class called `ExpectedState`. This is not exposed directly to the test but rather the `ExpectedState` for the latest values file is accessed via a pass-through API on `ExpectedStateManager`. This forces the test to always access the single latest `ExpectedState`.
- Changed the initialization of the latest expected values file to use a tempfile followed by rename, and also add cleanup logic for possible stranded tempfiles.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8913
Test Plan:
run in several ways; try to make sure it's not obviously broken.
- crashtest blackbox without TEST_TMPDIR
```
$ python3 tools/db_crashtest.py blackbox --simple --write_buffer_size=1048576 --target_file_size_base=1048576 --max_bytes_for_level_base=4194304 --max_key=100000 --value_size_mult=33 --compression_type=none --duration=120 --interval=10 --compression_type=none --blob_compression_type=none
```
- crashtest blackbox with TEST_TMPDIR
```
$ TEST_TMPDIR=/dev/shm python3 tools/db_crashtest.py blackbox --simple --write_buffer_size=1048576 --target_file_size_base=1048576 --max_bytes_for_level_base=4194304 --max_key=100000 --value_size_mult=33 --compression_type=none --duration=120 --interval=10 --compression_type=none --blob_compression_type=none
```
- crashtest whitebox with TEST_TMPDIR
```
$ TEST_TMPDIR=/dev/shm python3 tools/db_crashtest.py whitebox --simple --write_buffer_size=1048576 --target_file_size_base=1048576 --max_bytes_for_level_base=4194304 --max_key=100000 --value_size_mult=33 --compression_type=none --duration=120 --interval=10 --compression_type=none --blob_compression_type=none --random_kill_odd=88887
```
- db_stress without expected_values_dir
```
$ ./db_stress --write_buffer_size=1048576 --target_file_size_base=1048576 --max_bytes_for_level_base=4194304 --max_key=100000 --value_size_mult=33 --compression_type=none --ops_per_thread=10000 --clear_column_family_one_in=0 --destroy_db_initially=true
```
- db_stress with expected_values_dir and manual corruption
```
$ ./db_stress --write_buffer_size=1048576 --target_file_size_base=1048576 --max_bytes_for_level_base=4194304 --max_key=100000 --value_size_mult=33 --compression_type=none --ops_per_thread=10000 --clear_column_family_one_in=0 --destroy_db_initially=true --expected_values_dir=./
// modify one byte in "./LATEST.state"
$ ./db_stress --write_buffer_size=1048576 --target_file_size_base=1048576 --max_bytes_for_level_base=4194304 --max_key=100000 --value_size_mult=33 --compression_type=none --ops_per_thread=10000 --clear_column_family_one_in=0 --destroy_db_initially=false --expected_values_dir=./
...
Verification failed for column family 0 key 0000000000000000 (0): Value not found: NotFound:
...
```
Reviewed By: riversand963
Differential Revision: D30921951
Pulled By: ajkr
fbshipit-source-id: babfe218062e55d018c9b046536c0289fb78f41c
Summary:
For now, disable it since the below command indicates it can cause a
failure. Running that command with `-experimental_mempurge_threshold=0`
has been running successfully for several minutes, whereas before it
failed in seconds.
```
$ while rm -rf /dev/shm/single_stress && ./db_stress --clear_column_family_one_in=0 --column_families=1 --db=/dev/shm/single_stress --experimental_mempurge_threshold=5.493146827397074 --flush_one_in=10000 --reopen=0 --write_buffer_size=262144 --value_size_mult=33 --max_write_buffer_number=3 -ops_per_thread=10000; do : ; done
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8958
Reviewed By: ltamasi
Differential Revision: D31187059
Pulled By: ajkr
fbshipit-source-id: 04d5bfb4fcc4f5b66233e691427dfd940c67037f
Summary:
Several improvements to MultiRead:
1. Fix a bug in stress test which causes false positive when both MultiRead() return and individual read request have failure injected.
2. Add two more types of fault that should be handled: empty read results and checksum mismatch
3. Add a message indicating which type of fault is injected
4. Increase the failure rate
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8937
Reviewed By: anand1976
Differential Revision: D31085930
fbshipit-source-id: 3a04994a3cadebf9a64d25e1fe12b14b7a272fba
Summary:
In FileChecksumTestHelper::VerifyEachFileChecksum(), we query the file list, and then for each file in the list verify the checksum. However, compaction can delete those files in the mean time and cause failures. To prevent it from happening, disable file deletion during the validation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8942
Test Plan: Run exsiting test and see it doesn't fail.
Reviewed By: pdillinger
Differential Revision: D31086488
fbshipit-source-id: 554608f36d2dd3bf0a20dfc4039c68bd8533d7f8
Summary:
In case of IO uring bugs, we need to provide a way for users to turn it off.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8931
Test Plan: Manually run db_bench with/without the option and verify the behavior
Reviewed By: pdillinger
Differential Revision: D31040252
Pulled By: anand1976
fbshipit-source-id: 56f2537d6ac8488c9e126296d8190ad9e0158f70
Summary:
As title. The reason is that after loading customized options, the env is not set back to the correct one. Fix it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8929
Test Plan: Manually validate in an environment where the command failed.
Reviewed By: riversand963
Differential Revision: D31026931
fbshipit-source-id: c25dc788bf80ed5bf4b24922c442781943bcd65b
Summary:
Because even 32-bit systems can have large files
This is a "change" that I don't want intermingled with an upcoming refactoring.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8926
Test Plan: CI
Reviewed By: zhichao-cao
Differential Revision: D31020974
Pulled By: pdillinger
fbshipit-source-id: ca9eb4510697df6f1f55e37b37730b88b1809a92
Summary:
* Started on some proper usage text to document the options
* Added a `JOB_ID` parameter, so that we can trace jobs and relate them to other assets
* Now generates a correct TSV file of the summary
* Summary has new additional fields:
* RocksDB Version
* Date
* Job ID
* db_bench log files now also include the Job ID
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8730
Reviewed By: mrambacher
Differential Revision: D30747344
Pulled By: jay-zhuang
fbshipit-source-id: 87eb78d20959b6d95804aebf129606fa9c71f407
Summary:
These tests would frequently fail to find SST files due to race
condition in running ldb (read-only) on an open DB which might do automatic
compaction. But only sometimes would that failure translate into test
failure because the implementation of ldb file_checksum_dump would
swallow many errors. Now,
* DB closed while running ldb to avoid unnecessary race condition
* Detect and report/propagate more failures in `ldb file_checksum_dump`
* Use --hex so that random binary data is not printed to console
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8898
Test Plan: ./ldb_cmd_test --gtest_filter=*Checksum* --gtest_repeat=100
Reviewed By: zhichao-cao
Differential Revision: D30848738
Pulled By: pdillinger
fbshipit-source-id: 20290b517eeceba99bb538bb5a17088f7e878405
Summary:
This allows the wrapper classes to own the wrapped object and eliminates confusion as to ownership. Previously, many classes implemented their own ownership solutions. Fixes https://github.com/facebook/rocksdb/issues/8606
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8618
Reviewed By: pdillinger
Differential Revision: D30136064
Pulled By: mrambacher
fbshipit-source-id: d0bf471df8818dbb1770a86335fe98f761cca193
Summary:
Make the Statistics object into a Customizable object. Statistics can now be stored and created to/from the Options file.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8637
Reviewed By: zhichao-cao
Differential Revision: D30530550
Pulled By: mrambacher
fbshipit-source-id: 5fc7d01d8431f37b2c205bbbd8342c9f697023bd
Summary:
This PR does the following:
-> Makes the MemTableRepFactory into a Customizable class and creatable/configurable via CreateFromString
-> Makes the existing implementations compatible with configurations
-> Moves the "SpecialRepFactory" test class into testutil, accessible via the ObjectRegistry or a NewSpecial API
New tests were added to validate the functionality and all existing tests pass. db_bench and memtablerep_bench were hand-tested to verify the functionality in those tools.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8419
Reviewed By: zhichao-cao
Differential Revision: D29558961
Pulled By: mrambacher
fbshipit-source-id: 81b7229636e4e649a0c914e73ac7b0f8454c931c
Summary:
* Don't hardcode namespace rocksdb (use ROCKSDB_NAMESPACE)
* Don't #include <rocksdb/...> (use double quotes)
* Support putting NOCOMMIT (any case) in source code that should not be
committed/pushed in current state.
These will be run with `make check` and in GitHub actions
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8821
Test Plan: existing tests, manually try out new checks
Reviewed By: zhichao-cao
Differential Revision: D30791726
Pulled By: pdillinger
fbshipit-source-id: 399c883f312be24d9e55c58951d4013e18429d92
Summary:
Regression test is broken and not running:
1. failed test is not reporting, fix it by add `set -e`
2. internal regression test is not run inside github, removing that
3. fix a few minor issues to pass the test
4. delete unused binary size build, and regression test is reporting binary size now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8753
Test Plan: CI: https://www.internalfb.com/intern/sandcastle/job/13510799359573861
Reviewed By: ltamasi
Differential Revision: D30754380
Pulled By: jay-zhuang
fbshipit-source-id: 0cfa008327fff31bc61118a3fe642924090d28e1
Summary:
* FullKey and ParseFullKey appear to serve no purpose in the public API
(or anything else) so removed. Only use in one test updated.
* NumberToString serves no purpose vs. ToString so removed, numerous
calls updated
* Remove unnecessary forward declarations in metadata.h by re-arranging
class definitions.
* Remove some unneeded semicolons
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8736
Test Plan: existing tests
Reviewed By: mrambacher
Differential Revision: D30700039
Pulled By: pdillinger
fbshipit-source-id: 1e436a576f511a6ed8b4d97af7cc8216bc729af2
Summary:
Current implementation does not support user-defined timestamp when
block-based filter is used. Will implement the support in the future, or
wait to see if block-based filter can be deprecated and removed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8703
Test Plan: make whitebox_crash_test_with_ts
Reviewed By: pdillinger
Differential Revision: D30528931
Pulled By: riversand963
fbshipit-source-id: 60dd74ee0a6194e69072069d8c4bd876f249f38d
Summary:
Handler functions now use a common output function to output to stdout/files.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8697
Test Plan: `trace_analyzer_test` can pass.
Reviewed By: zhichao-cao
Differential Revision: D30527696
Pulled By: autopear
fbshipit-source-id: c626cf4d53a39665a9c4bcf0cb019c448434abe4
Summary:
This is essentially resurrection and fixing of the part of
https://github.com/facebook/rocksdb/issues/8198 that was reverted in https://github.com/facebook/rocksdb/issues/8212, using data added in https://github.com/facebook/rocksdb/issues/8246. Basically,
when configuring Ribbon filter, you can specify an LSM level before which
Bloom will be used instead of Ribbon. But Bloom is only considered for
Leveled and Universal compaction styles and file going into a known LSM
level. This way, SST file writer, FIFO compaction, etc. use Ribbon filter as
you would expect with NewRibbonFilterPolicy.
So that this can be controlled with a single int value and so that flushes
can be distinguished from intra-L0, we consider flush to go to level -1 for
the purposes of this option. (Explained in API comment.)
I also expect the most common and recommended Ribbon configuration to
use Bloom during flush, to minimize slowing down writes and because according
to my estimates, Ribbon only pays off if the structure lives in memory for
more than an hour. Thus, I have changed the default for NewRibbonFilterPolicy
to be this mild hybrid configuration. I don't really want to add something like
NewHybridFilterPolicy because at least the mild hybrid configuration (Bloom for
flush, Ribbon otherwise) should be considered a natural choice.
C APIs also updated, but because they don't support overloading,
rocksdb_filterpolicy_create_ribbon is kept pure ribbon for clarity and
rocksdb_filterpolicy_create_ribbon_hybrid must be called for a hybrid
configuration. While touching C API, I changed bits per key options from
int to double.
BuiltinFilterPolicy is needed so that LevelThresholdFilterPolicy doesn't inherit
unused fields from BloomFilterPolicy.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8679
Test Plan: new + updated tests, including crash test
Reviewed By: jay-zhuang
Differential Revision: D30445797
Pulled By: pdillinger
fbshipit-source-id: 6f5aeddfd6d79f7e55493b563c2d1d2d568892e1
Summary:
`Replayer::Execute()` can directly returns the result (e.g, request latency, DB::Get() return code, returned value, etc.)
`Replayer::Replay()` reports the results via a callback function.
New interface:
`TraceRecordResult` in "rocksdb/trace_record_result.h".
`DBTest2.TraceAndReplay` and `DBTest2.TraceAndManualReplay` are updated accordingly.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8657
Reviewed By: ajkr
Differential Revision: D30290216
Pulled By: autopear
fbshipit-source-id: 3c8d4e6b180ec743de1a9d9dcaee86064c74f0d6
Summary:
New public interfaces:
`TraceRecord` and `TraceRecord::Handler`, available in "rocksdb/trace_record.h".
`Replayer`, available in `rocksdb/utilities/replayer.h`.
User can use `DB::NewDefaultReplayer()` to create a Replayer to auto/manual replay a trace file.
Unit tests:
- `./db_test2 --gtest_filter="DBTest2.TraceAndReplay"`: Updated with the internal API changes.
- `./db_test2 --gtest_filter="DBTest2.TraceAndManualReplay"`: New for manual replay.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8611
Reviewed By: ajkr
Differential Revision: D30266329
Pulled By: autopear
fbshipit-source-id: 1ecb3cbbedae0f6a67c18f0cc82e002b4d81b6f8
Summary:
The last few releases overlooked adding to this test. This
change fixes that.
This change also fixes the problem of older branches not understanding
ROCKSDB_NO_FBCODE and referencing compilers no longer supported.
During the test, build_detect_platform is patched to force no FBCODE
compiler usage. (We should not need to update old branches perpetually.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8651
Test Plan: local run reproduces regression described in https://github.com/facebook/rocksdb/issues/8650
Reviewed By: jay-zhuang, zhichao-cao
Differential Revision: D30261872
Pulled By: pdillinger
fbshipit-source-id: 02b447d224d7e0eb8613c63185437ded146713bc
Summary:
Changes the API of the MemPurge process: the `bool experimental_allow_mempurge` and `experimental_mempurge_policy` flags have been replaced by a `double experimental_mempurge_threshold` option.
This change of API reflects another major change introduced in this PR: the MemPurgeDecider() function now works by sampling the memtables being flushed to estimate the overall amount of useful payload (payload minus the garbage), and then compare this useful payload estimate with the `double experimental_mempurge_threshold` value.
Therefore, when the value of this flag is `0.0` (default value), mempurge is simply deactivated. On the other hand, a value of `DBL_MAX` would be equivalent to always going through a mempurge regardless of the garbage ratio estimate.
At the moment, a `double experimental_mempurge_threshold` value else than 0.0 or `DBL_MAX` is opnly supported`with the `SkipList` memtable representation.
Regarding the sampling, this PR includes the introduction of a `MemTable::UniqueRandomSample` function that collects (approximately) random entries from the memtable by using the new `SkipList::Iterator::RandomSeek()` under the hood, or by iterating through each memtable entry, depending on the target sample size and the total number of entries.
The unit tests have been readapted to support this new API.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8628
Reviewed By: pdillinger
Differential Revision: D30149315
Pulled By: bjlemaire
fbshipit-source-id: 1feef5390c95db6f4480ab4434716533d3947f27
Summary:
`GenericRateLimiter` slow path handles requests that cannot be satisfied
immediately. Such requests enter a queue, and their thread stays in `Request()`
until they are granted or the rate limiter is stopped. These threads are
responsible for unblocking themselves. The work to do so is split into two main
duties.
(1) Waiting for the next refill time.
(2) Refilling the bytes and granting requests.
Prior to this PR, the slow path logic involved a leader election algorithm to
pick one thread to perform (1) followed by (2). It elected the thread whose
request was at the front of the highest priority non-empty queue since that
request was most likely to be granted. This algorithm was efficient in terms of
reducing intermediate wakeups, which is a thread waking up only to resume
waiting after finding its request is not granted. However, the conceptual
complexity of this algorithm was too high. It took me a long time to draw a
timeline to understand how it works for just one edge case yet there were so
many.
This PR drops the leader election to reduce conceptual complexity. Now, the two
duties can be performed by whichever thread acquires the lock first. The risk
of this change is increasing the number of intermediate wakeups, however, we
took steps to mitigate that.
- `wait_until_refill_pending_` flag ensures only one thread performs (1). This\
prevents the thundering herd problem at the next refill time. The remaining\
threads wait on their condition variable with an unbounded duration -- thus we\
must remember to notify them to ensure forward progress.
- (1) is typically done by a thread at the front of a queue. This is trivial\
when the queues are initially empty as the first choice that arrives must be\
the only entry in its queue. When queues are initially non-empty, we achieve\
this by having (2) notify a thread at the front of a queue (preferring higher\
priority) to perform the next duty.
- We do not require any additional wakeup for (2). Typically it will just be\
done by the thread that finished (1).
Combined, the second and third bullet points above suggest the refill/granting
will typically be done by a request at the front of its queue. This is
important because one wakeup is saved when a granted request happens to be in an
already running thread.
Note there are a few cases that still lead to intermediate wakeup, however. The
first two are existing issues that also apply to the old algorithm, however, the
third (including both subpoints) is new.
- No request may be granted (only possible when rate limit dynamically\
decreases).
- Requests from a different queue may be granted.
- (2) may be run by a non-front request thread causing it to not be granted even\
if some requests in that same queue are granted. It can happen for a couple\
(unlikely) reasons.
- A new request may sneak in and grab the lock at the refill time, before the\
thread finishing (1) can wake up and grab it.
- A new request may sneak in and grab the lock and execute (1) before (2)'s\
chosen candidate can wake up and grab the lock. Then that non-front request\
thread performing (1) can carry over to perform (2).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8602
Test Plan:
- Use existing tests. The edge cases listed in the comment are all performance\
related; I could not really think of any related to correctness. The logic\
looks the same whether a thread wakes up/finishes its work early/on-time/late,\
or whether the thread is chosen vs. "steals" the work.
- Verified write throughput and CPU overhead are basically the same with and\
without this change, even in a rate limiter heavy workload:
Test command:
```
$ rm -rf /dev/shm/dbbench/ && TEST_TMPDIR=/dev/shm /usr/bin/time ./db_bench -benchmarks=fillrandom -num_multi_db=64 -num_low_pri_threads=64 -num_high_pri_threads=64 -write_buffer_size=262144 -target_file_size_base=262144 -max_bytes_for_level_base=1048576 -rate_limiter_bytes_per_sec=16777216 -key_size=24 -value_size=1000 -num=10000 -compression_type=none -rate_limiter_refill_period_us=1000
```
Results before this PR:
```
fillrandom : 108.463 micros/op 9219 ops/sec; 9.0 MB/s
7.40user 8.84system 1:26.20elapsed 18%CPU (0avgtext+0avgdata 256140maxresident)k
```
Results after this PR:
```
fillrandom : 108.108 micros/op 9250 ops/sec; 9.0 MB/s
7.45user 8.23system 1:26.68elapsed 18%CPU (0avgtext+0avgdata 255688maxresident)k
```
Reviewed By: hx235
Differential Revision: D30048013
Pulled By: ajkr
fbshipit-source-id: 6741bba9d9dfbccab359806d725105817fef818b
Summary:
Some FIFO users want to keep the data for longer, but the old data is rarely accessed. This feature allows users to configure FIFO compaction so that data older than a threshold is moved to a warm storage tier.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8310
Test Plan: Add several unit tests.
Reviewed By: ajkr
Differential Revision: D28493792
fbshipit-source-id: c14824ea634814dee5278b449ab5c98b6e0b5501
Summary:
- Changed MergeOperator, CompactionFilter, and CompactionFilterFactory into Customizable classes.
- Added Options/Configurable/Object Registration for TTL and Cassandra variants
- Changed the StringAppend MergeOperators to accept a string delimiter rather than a simple char. Made the delimiter into a configurable option
- Added tests for new functionality
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8481
Reviewed By: zhichao-cao
Differential Revision: D30136050
Pulled By: mrambacher
fbshipit-source-id: 271d1772835935b6773abaf018ee71e42f9491af
Summary:
Prior to this change, the "wal_dir" DBOption would always be set (defaults to dbname) when the DBOptions were sanitized. Because of this setitng in the options file, it was not possible to rename/relocate a database directory after it had been created and use the existing options file.
After this change, the "wal_dir" option is only set under specific circumstances. Methods were added to the ImmutableDBOptions class to see if it is set and if it is set to something other than the dbname. Additionally, a method was added to retrieve the effective value of the WAL dir (either the option or the dbname/path).
Tests were added to the core and ldb to test that a database could be created and renamed without issue. Additional tests for various permutations of wal_dir were also added.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8582
Reviewed By: pdillinger, autopear
Differential Revision: D29881122
Pulled By: mrambacher
fbshipit-source-id: 67d3d033dc8813d59917b0a3fba2550c0efd6dfb
Summary:
Introduction of a new `fillanddeleteuniquerandom` benchmark (`db_bench`) with 5 new option flags to simulate a benchmark where the following sequence is repeated multiple times:
"A set of keys S1 is inserted ('`disposable entries`'), then after some delay another set of keys S2 is inserted ('`persistent entries`') and the first set of keys S1 is deleted. S2 artificially represents the insertion of hypothetical results from some undefined computation done on the first set of keys S1. The next sequence can start as soon as the last disposable entry in the set S1 of this sequence is inserted, if the `delay` is non negligible."
New flags:
- `disposable_entries_delete_delay`: minimum delay in microseconds between insertion of the last `disposable` entry, and the start of the insertion of the first `persistent` entry.
- `disposable_entries_batch_size`: number of `disposable` entries inserted at the beginning of each sequence.
- `disposable_entries_value_size`: size of the random `value` string for the `disposable` entries.
- `persistent_entries_batch_size`: number of `persistent` entries inserted at the end of each sequence, right before the deletion of the `disposable` entries starts.
- `persistent_entries_value_size`: size of the random value string for the `persistent` entries.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8593
Reviewed By: pdillinger
Differential Revision: D29974436
Pulled By: bjlemaire
fbshipit-source-id: f578033e5b45e8268ba6fa6f38f4770c2e6e801d
Summary:
* Basic handling of SST file with just range tombstones rather than
failing assertion about smallest_seqno <= largest_seqno
* Adds --verbose option so that there exists a way to see the INFO
output from Repairer.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8544
Test Plan: unit test added, manual testing for --verbose
Reviewed By: ajkr
Differential Revision: D29954805
Pulled By: pdillinger
fbshipit-source-id: 696af25805fc36cc178b04ba6045922a22625fd9
Summary:
Add `experimental_mempurge_policy` flag to `db_stress` and `db_crashtest.py`.
This flag is only read if the `experimental_allow_mempurge` flag is set to `true`. This flag can take the following values: `kAlways`, and `kAlternate` (default).
- `kAlways`: a flush is always redirected to a mempurge. If the mempurge aborts, the a regular flush proceeds.
- `kAlternate`: if one or more of the flush input memtables is an mempurge output memtable, then a flush is performed, else a mempurge is carried out. Similar to kAlways, if a mempurge aborts, the FlushJob proceeds to a regular flush to storage.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8588
Reviewed By: pdillinger
Differential Revision: D29934251
Pulled By: bjlemaire
fbshipit-source-id: 90c1debed2029b9915d066914556547507c33dae
Summary:
- Added Type/CreateFromString
- Added ability to load EventListeners to DBOptions
- Since EventListeners did not previously have a Name(), defaulted to "". If there is no name, the listener cannot be loaded from the ObjectRegistry.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8473
Reviewed By: zhichao-cao
Differential Revision: D29901488
Pulled By: mrambacher
fbshipit-source-id: 2d3a4aa6db1562ac03e7ad41b360e3521d486254
Summary:
Add `experimental_mempurge_policy` option flag and introduce two new `MemPurge` (Memtable Garbage Collection) policies: 'ALWAYS' and 'ALTERNATE'. Default value: ALTERNATE.
`ALWAYS`: every flush will first go through a `MemPurge` process. If the output is too big to fit into a single memtable, then the mempurge is aborted and a regular flush process carries on. `ALWAYS` is designed for user that need to reduce the number of L0 SST file created to a strict minimum, and can afford a small dent in performance (possibly hits to CPU usage, read efficiency, and maximum burst write throughput).
`ALTERNATE`: a flush is transformed into a `MemPurge` except if one of the memtables being flushed is the product of a previous `MemPurge`. `ALTERNATE` is a good tradeoff between reduction in number of L0 SST files created and performance. `ALTERNATE` perform particularly well for completely random garbage ratios, or garbage ratios anywhere in (0%,50%], and even higher when there is a wild variability in garbage ratios.
This PR also includes support for `experimental_mempurge_policy` in `db_bench`.
Testing was done locally by replacing all the `MemPurge` policies of the unit tests with `ALTERNATE`, as well as local testing with `db_crashtest.py` `whitebox` and `blackbox`. Overall, if an `ALWAYS` mempurge policy passes the tests, there is no reasons why an `ALTERNATE` policy would fail, and therefore the mempurge policy was set to `ALWAYS` for all mempurge unit tests.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8583
Reviewed By: pdillinger
Differential Revision: D29888050
Pulled By: bjlemaire
fbshipit-source-id: e2cf26646d66679f6f5fb29842624615610759c1
Summary:
PR https://github.com/facebook/rocksdb/issues/8519 fix db_bench_tool.cc for MSVC build errors by simply copy-paste, this PR fix the copy-paste while also works for MSVC.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8553
Reviewed By: ajkr
Differential Revision: D29838056
Pulled By: jay-zhuang
fbshipit-source-id: 0cd60c146b87a355c3dc1061dfe813169d75cea4
Summary:
Now we can analyze the MultiGet queries in the trace file and generate a set of the statistic and analysis files. Note that, when one MultiGet access N keys, we count each sub-get-query individually. But the over all query number is still the MultiGet not the sub-get-query.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8575
Test Plan: added new unit test and make check
Reviewed By: anand1976
Differential Revision: D29860633
Pulled By: zhichao-cao
fbshipit-source-id: a132128527f36828d266df8e36e3ec626c2170be
Summary:
Add flags `overwrite_probability` and `overwrite_window_size` flag to `db_bench`.
Add the possibility of performing a `filluniquerandom` benchmark with an overwrite probability.
For each write operation, there is a probability _p_ that the write is an overwrite (_p_=`overwrite_probability`).
When an overwrite is decided, the key is randomly chosen from the last _N_ keys previously inserted into the DB (with _N_=`overwrite_window_size`).
When a pure write is decided, the key inserted into the DB is unique and therefore will not be an overwrite.
The `overwrite_window_size` is used so that the user can decide if the overwrite are mostly targeting recently inserted keys (when `overwrite_window_size` is small compared to the total number of writes), or can also target keys inserted "a long time ago" (when `overwrite_window_size` is comparable to total number of writes).
Note that total number of writes = # of unique insertions + # of overwrites.
No unit test specifically added.
Local testing show the following **throughputs** for `filluniquerandom` with 1M total writes:
- bypass the code inserts (no `overwrite_probability` flag specified): ~14.0MB/s
- `overwrite_probability=0.99`, `overwrite_window_size=10`: ~17.0MB/s
- `overwrite_probability=0.10`, `overwrite_window_size=10`: ~14.0MB/s
- `overwrite_probability=0.99`, `overwrite_window_size=1M`: ~14.5MB/s
- `overwrite_probability=0.10`, `overwrite_window_size=1M`: ~14.0MB/s
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8569
Reviewed By: pdillinger
Differential Revision: D29818631
Pulled By: bjlemaire
fbshipit-source-id: d472b4ea4e457a4da7c4ee4f14b40cccd6a4587a
Summary:
Tiny PR to add the `experimental_allow_mempurge` to the `db_bench` tool (`Mempurge` is the current prototype for memtable garbage collection).
This is useful to benchmark the prototype of this new feature, stress test it and help find new meaningful heuristics for GC.
By default, the flag to allow `mempurge` is set to `false`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8546
Reviewed By: anand1976
Differential Revision: D29738338
Pulled By: bjlemaire
fbshipit-source-id: 01892883a2f1c714c110718674da05992d6e2dd6
Summary:
Right now, db_bench with seekrandom and multiple DB setup creates iterator for all DBs just to query one of them. It's different from most real workloads. Fix it by only creating iterators that will be queried.
Also fix a bug that DBs are not destroyed in multi-DB mode.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7818
Test Plan: Run db_bench with single/multiDB X using/not using tailing iterator with ASAN build, and validate the behavior is expected.
Reviewed By: ajkr
Differential Revision: D25720226
fbshipit-source-id: c2ff7ff7120e5ba64287a30b057c5d29b2cbe20b
Summary:
Add `experiemental_allow_mempurge` flag support for `db_stress` and `db_crashtest.py`, with a `false` default value.
I succesfully tested locally both `whitebox` and `blackbox` crash tests with `experiemental_allow_mempurge` flag set as true.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8545
Reviewed By: akankshamahajan15
Differential Revision: D29734513
Pulled By: bjlemaire
fbshipit-source-id: 24316c0eccf6caf409e95c035f31d822c66714ae
Summary:
Fixed a few MSVC (VCToolsVersion=14.0) build errors and warnings
* `DEFINE_string` is a macro and VC compiler complains that it cannot put [ifdef-inside-define](https://stackoverflow.com/questions/5586429/ifdef-inside-define)
* `sleep()` is not a recognizable function. Use `FLAGS_env->SleepForMicroseconds` instead
* Define precise type in comparison to avoid mismatch warning
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8519
Reviewed By: jay-zhuang
Differential Revision: D29683086
fbshipit-source-id: 8c80941472089f8daba84ae29597e75e603850e4
Summary:
1. Fix printing of stats when there are no writes (wamp=0). Previously had a div0 error
2. Added multireadrandom command as a valid target
3. Added ability to pass additional command line options to db_bench. Now can say things like benchmark.sh readrandom --mmap_read and the option will be passed to db_bench.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8346
Reviewed By: zhichao-cao
Differential Revision: D29500436
Pulled By: mrambacher
fbshipit-source-id: 54e90708aae9133be3a903e35efdf8f8abbd86fa
Summary:
Inject read failures in DB reopen, just as what we do for metadata writes and writes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8476
Test Plan: Some manual tests and make sure failures are triggered.
Reviewed By: anand1976
Differential Revision: D29507283
fbshipit-source-id: d04da0163973447041038bd87701686a417c4e0c
Summary:
Previously Stress can inject metadata write failures when reopening a DB. We extend it to file append too, in the same way.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8474
Test Plan: manually run crash test with various setting and make sure the failures are triggered as expected.
Reviewed By: zhichao-cao
Differential Revision: D29503116
fbshipit-source-id: e73a446e80ccbd09301a579280e56ff949381fab
Summary:
Add a ```-secondary_cache_uri``` to db_stress to allow the user to specify a custom ```SecondaryCache``` object from the object registry. Also allow db_crashtest.py to be run with an alternate db_stress location. Together, these changes will allow us to run db_stress using FB internal components.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8455
Reviewed By: zhichao-cao
Differential Revision: D29371972
Pulled By: anand1976
fbshipit-source-id: dd1b1fd80ebbedc11aa63d9246ea6ae49edb77c4
Summary:
Hello and thanks for RocksDB,
Here is a PR to add file deletes, renames and ```Flush()```, ```Sync()```, ```Fsync()``` and ```Close()``` to file ops report.
The reason is to help tune RocksDB options when using an env/filesystem with high latencies for file level ("metadata") operations, typically seen during ```DB::Open``` (```db_bench -num 0``` also see https://github.com/facebook/rocksdb/pull/7203 where IOTracing does not trace ```DB::Open```).
Before:
```
> db_bench -benchmarks updaterandom -num 0 -report_file_operations true
...
Entries: 0
...
Num files opened: 12
Num Read(): 6
Num Append(): 8
Num bytes read: 6216
Num bytes written: 6289
```
After:
```
> db_bench -benchmarks updaterandom -num 0 -report_file_operations true
...
Entries: 0
...
Num files opened: 12
Num files deleted: 3
Num files renamed: 4
Num Flush(): 10
Num Sync(): 5
Num Fsync(): 1
Num Close(): 2
Num Read(): 6
Num Append(): 8
Num bytes read: 6216
Num bytes written: 6289
```
Before:
```
> db_bench -benchmarks updaterandom -report_file_operations true
...
Entries: 1000000
...
Num files opened: 18
Num Read(): 396339
Num Append(): 1000058
Num bytes read: 892030224
Num bytes written: 187569238
```
After:
```
> db_bench -benchmarks updaterandom -report_file_operations true
...
Entries: 1000000
...
Num files opened: 18
Num files deleted: 5
Num files renamed: 4
Num Flush(): 1000068
Num Sync(): 9
Num Fsync(): 1
Num Close(): 6
Num Read(): 396339
Num Append(): 1000058
Num bytes read: 892030224
Num bytes written: 187569238
```
Another example showing how using ```DB::OpenForReadOnly``` reduces file operations compared to ```((Optimistic)Transaction)DB::Open```:
```
> db_bench -benchmarks updaterandom -num 1
> db_bench -benchmarks updaterandom -num 0 -use_existing_db true -readonly true -report_file_operations true
...
Entries: 0
...
Num files opened: 8
Num files deleted: 0
Num files renamed: 0
Num Flush(): 0
Num Sync(): 0
Num Fsync(): 0
Num Close(): 0
Num Read(): 13
Num Append(): 0
Num bytes read: 374
Num bytes written: 0
```
```
> db_bench -benchmarks updaterandom -num 1
> db_bench -benchmarks updaterandom -num 0 -use_existing_db true -report_file_operations true
...
Entries: 0
...
Num files opened: 14
Num files deleted: 3
Num files renamed: 4
Num Flush(): 14
Num Sync(): 5
Num Fsync(): 1
Num Close(): 3
Num Read(): 11
Num Append(): 10
Num bytes read: 7291
Num bytes written: 7357
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8448
Reviewed By: anand1976
Differential Revision: D29333818
Pulled By: zhichao-cao
fbshipit-source-id: a06a8c87f799806462319115195b3e94faf5f542
Summary:
Add an argument to ldb to dump live file names, column families, and levels, `list_live_files_metadata`. The output shows all active SST file names, sorted first by column family and then by level. For each level the SST files are sorted alphabetically.
Typically, the output looks like this:
```
./ldb --db=/tmp/test_db list_live_files_metadata
Live SST Files:
===== Column Family: default =====
---------- level 0 ----------
/tmp/test_db/000069.sst
---------- level 1 ----------
/tmp/test_db/000064.sst
/tmp/test_db/000065.sst
/tmp/test_db/000066.sst
/tmp/test_db/000071.sst
---------- level 2 ----------
/tmp/test_db/000038.sst
/tmp/test_db/000039.sst
/tmp/test_db/000052.sst
/tmp/test_db/000067.sst
/tmp/test_db/000070.sst
------------------------------
```
Second, a flag was added `--sort_by_filename`, to change the layout of the output. When this flag is added to the command, the output shows all active SST files sorted by name, in front of which the LSM level and the column family are mentioned. With the same example, the following command would return:
```
./ldb --db=/tmp/test_db list_live_files_metadata --sort_by_filename
Live SST Files:
/tmp/test_db/000038.sst : level 2, column family 'default'
/tmp/test_db/000039.sst : level 2, column family 'default'
/tmp/test_db/000052.sst : level 2, column family 'default'
/tmp/test_db/000064.sst : level 1, column family 'default'
/tmp/test_db/000065.sst : level 1, column family 'default'
/tmp/test_db/000066.sst : level 1, column family 'default'
/tmp/test_db/000067.sst : level 2, column family 'default'
/tmp/test_db/000069.sst : level 0, column family 'default'
/tmp/test_db/000070.sst : level 2, column family 'default'
/tmp/test_db/000071.sst : level 1, column family 'default'
------------------------------
```
Thus, the user can either request to show the files by levels, or sorted by filenames.
This PR includes a simple Python unit test that makes sure the file name and level printed out by this new feature matches the one found with an existing feature, `dump_live_file`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8446
Reviewed By: akankshamahajan15
Differential Revision: D29320080
Pulled By: bjlemaire
fbshipit-source-id: 01fb7b5637c59010d74c80730a28d815994e7009
Summary:
At the moment, the following command : "`./ --db=mypath/ dump_file_files`" returns a series of erronous names with double slashes, ie: "`mypath//000xxx.sst`", including manifest file names with double slashes "`mypath//MANIFEST-00XXX`", whereas "`./ --db=mypath dump_file_files`" correctly returns "`mypath/000xxx.sst`" and "`mypath/MANIFEST-00XXX`".
This (very short) PR simply checks if there is a need to add or remove any '`/`' character when the `db_path` and `manifest_filename`/sst `filenames` are concatenated.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8439
Reviewed By: akankshamahajan15
Differential Revision: D29301349
Pulled By: bjlemaire
fbshipit-source-id: 3e9e58f9749d278b654ae838fcee13ad698705a8
Summary:
Tracing the MultiGet information including timestamp, keys, and CF_IDs to the trace file for analyzing and replay.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8421
Test Plan: make check, add test to trace_analyzer_test
Reviewed By: anand1976
Differential Revision: D29221195
Pulled By: zhichao-cao
fbshipit-source-id: 30c677d6c39ab31ef4bbdf7e0d1fa1fd79f295ff
Summary:
This PR prepopulates warm/hot data blocks which are already in memory
into block cache at the time of flush. On a flush, the data block that is
in memory (in memtables) get flushed to the device. If using Direct IO,
additional IO is incurred to read this data back into memory again, which
is avoided by enabling newly added option.
Right now, this is enabled only for flush for data blocks. We plan to
expand this option to cover compactions in the future and for other types
of blocks.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8242
Test Plan: Add new unit test
Reviewed By: anand1976
Differential Revision: D28521703
Pulled By: akankshamahajan15
fbshipit-source-id: 7219d6958821cedce689a219c3963a6f1a9d5f05
Summary:
Marked the Ribbon filter and optimize_filters_for_memory features
as production-ready, each enabling memory savings for Bloom-like filters.
Use `NewRibbonFilterPolicy` in place of `NewBloomFilterPolicy` to use
Ribbon filters instead of Bloom, or `ribbonfilter` in place of
`bloomfilter` in configuration string.
Some small refactoring in db_stress.
Removed/refactored unused code in db_bench, in part preparing for future
default possibly being different from "disabled."
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8408
Test Plan:
Lots of prior automated, ad-hoc, and "real world" testing.
Updated tests for new API names. Quick db_bench test:
bloom fillrandom
77730 ops/sec
rocksdb.block.cache.filter.bytes.insert COUNT : 89929384
ribbon fillrandom
71492 ops/sec
rocksdb.block.cache.filter.bytes.insert COUNT : 64531384
Reviewed By: mrambacher
Differential Revision: D29140805
Pulled By: pdillinger
fbshipit-source-id: d742c922722421678f95ad85eeb0aaebc9f5e49a
Summary:
- Added CreateFromString method to Env and FilesSystem to replace LoadEnv/Load. This method/signature is a precursor to making these classes extend Customizable.
- Added CreateFromSystem to Env. This method standardizes creating an Env from the environment variables. Previously, some places would check TEST_ENV_URI and others would also check TEST_FS_URI. Now the code is more command/standardized.
- Added CreateFromFlags to Env. These method allows Env to be create from string options (such as GFLAGS options) in a more standard way.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8174
Reviewed By: zhichao-cao
Differential Revision: D28999603
Pulled By: mrambacher
fbshipit-source-id: 88e6911e7e91f908458a7fe10a20e93ecbc275fb
Summary:
Changed fprintf function to fputc in ApplyVersionEdit, and replaced null characters with whitespaces.
Added unit test in ldb_test.py - verifies that manifest_dump --verbose output is correct when keys and values containing null characters are inserted.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8378
Reviewed By: pdillinger
Differential Revision: D29034584
Pulled By: bjlemaire
fbshipit-source-id: 50833687a8a5f726e247c38457eadc3e6dbab862
Summary:
Currently, we either use the file system inode or a monotonically incrementing runtime ID as the block cache key prefix. However, if we use a monotonically incrementing runtime ID (in the case that the file system does not support inode id generation), in some cases, it cannot ensure uniqueness (e.g., we have secondary cache migrated from host to host). We use DbSessionID (20 bytes) + current file number (at most 10 bytes) as the new cache block key prefix when the secondary cache is enabled. So can accommodate scenarios such as transfer of cache state across hosts.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8360
Test Plan: add the test to lru_cache_test
Reviewed By: pdillinger
Differential Revision: D29006215
Pulled By: zhichao-cao
fbshipit-source-id: 6cff686b38d83904667a2bd39923cd030df16814
Summary:
- Fix cmake build failure with gflags.
- Add CI tests for both gflags 2.1 and 2.2.
- Fix ctest config with gtest.
- Add CI to run test with ctest.
One benefit of ctest is it support timeout, it's set to 5min in our CI, so we will know which test is hang.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8324
Test Plan: CI pass
Reviewed By: ajkr
Differential Revision: D28762517
Pulled By: jay-zhuang
fbshipit-source-id: 09063c5af5f9f33abfcdeb48593acbd9826cd199
Summary:
Whitebox crash test can run significantly over the time limit for test slowness or no kiling points. This indefinite job can create problem when this test is periodically scheduled as a job. Instead, kill the job if it is 15 minutes over the limit.
Refactor the code slightly to consolidate the code for executing commands for white and black box tests.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8341
Test Plan: Run both of black and white box tests with both of natual and explicit kill condition.
Reviewed By: jay-zhuang
Differential Revision: D28756170
fbshipit-source-id: f253149890e62ace78f871be927e093e9b12f49b
Summary:
This change gathers and publishes statistics about the
kinds of items in block cache. This is especially important for
profiling relative usage of cache by index vs. filter vs. data blocks.
It works by iterating over the cache during periodic stats dump
(InternalStats, stats_dump_period_sec) or on demand when
DB::Get(Map)Property(kBlockCacheEntryStats), except that for
efficiency and sharing among column families, saved data from
the last scan is used when the data is not considered too old.
The new information can be seen in info LOG, for example:
Block cache LRUCache@0x7fca62229330 capacity: 95.37 MB collections: 8 last_copies: 0 last_secs: 0.00178 secs_since: 0
Block cache entry stats(count,size,portion): DataBlock(7092,28.24 MB,29.6136%) FilterBlock(215,867.90 KB,0.888728%) FilterMetaBlock(2,5.31 KB,0.00544%) IndexBlock(217,180.11 KB,0.184432%) WriteBuffer(1,256.00 KB,0.262144%) Misc(1,0.00 KB,0%)
And also through DB::GetProperty and GetMapProperty (here using
ldb just for demonstration):
$ ./ldb --db=/dev/shm/dbbench/ get_property rocksdb.block-cache-entry-stats
rocksdb.block-cache-entry-stats.bytes.data-block: 0
rocksdb.block-cache-entry-stats.bytes.deprecated-filter-block: 0
rocksdb.block-cache-entry-stats.bytes.filter-block: 0
rocksdb.block-cache-entry-stats.bytes.filter-meta-block: 0
rocksdb.block-cache-entry-stats.bytes.index-block: 178992
rocksdb.block-cache-entry-stats.bytes.misc: 0
rocksdb.block-cache-entry-stats.bytes.other-block: 0
rocksdb.block-cache-entry-stats.bytes.write-buffer: 0
rocksdb.block-cache-entry-stats.capacity: 8388608
rocksdb.block-cache-entry-stats.count.data-block: 0
rocksdb.block-cache-entry-stats.count.deprecated-filter-block: 0
rocksdb.block-cache-entry-stats.count.filter-block: 0
rocksdb.block-cache-entry-stats.count.filter-meta-block: 0
rocksdb.block-cache-entry-stats.count.index-block: 215
rocksdb.block-cache-entry-stats.count.misc: 1
rocksdb.block-cache-entry-stats.count.other-block: 0
rocksdb.block-cache-entry-stats.count.write-buffer: 0
rocksdb.block-cache-entry-stats.id: LRUCache@0x7f3636661290
rocksdb.block-cache-entry-stats.percent.data-block: 0.000000
rocksdb.block-cache-entry-stats.percent.deprecated-filter-block: 0.000000
rocksdb.block-cache-entry-stats.percent.filter-block: 0.000000
rocksdb.block-cache-entry-stats.percent.filter-meta-block: 0.000000
rocksdb.block-cache-entry-stats.percent.index-block: 2.133751
rocksdb.block-cache-entry-stats.percent.misc: 0.000000
rocksdb.block-cache-entry-stats.percent.other-block: 0.000000
rocksdb.block-cache-entry-stats.percent.write-buffer: 0.000000
rocksdb.block-cache-entry-stats.secs_for_last_collection: 0.000052
rocksdb.block-cache-entry-stats.secs_since_last_collection: 0
Solution detail - We need some way to flag what kind of blocks each
entry belongs to, preferably without changing the Cache API.
One of the complications is that Cache is a general interface that could
have other users that don't adhere to whichever convention we decide
on for keys and values. Or we would pay for an extra field in the Handle
that would only be used for this purpose.
This change uses a back-door approach, the deleter, to indicate the
"role" of a Cache entry (in addition to the value type, implicitly).
This has the added benefit of ensuring proper code origin whenever we
recognize a particular role for a cache entry; if the entry came from
some other part of the code, it will use an unrecognized deleter, which
we simply attribute to the "Misc" role.
An internal API makes for simple instantiation and automatic
registration of Cache deleters for a given value type and "role".
Another internal API, CacheEntryStatsCollector, solves the problem of
caching the results of a scan and sharing them, to ensure scans are
neither excessive nor redundant so as not to harm Cache performance.
Because code is added to BlocklikeTraits, it is pulled out of
block_based_table_reader.cc into its own file.
This is a reformulation of https://github.com/facebook/rocksdb/issues/8276, without the type checking option
(could still be added), and with actual stat gathering.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8297
Test Plan: manual testing with db_bench, and a couple of basic unit tests
Reviewed By: ltamasi
Differential Revision: D28488721
Pulled By: pdillinger
fbshipit-source-id: 472f524a9691b5afb107934be2d41d84f2b129fb
Summary:
This PR adds a ```-secondary_cache_uri``` option to the cache_bench and db_bench tools to allow the user to specify a custom secondary cache URI. The object registry is used to create an instance of the ```SecondaryCache``` object of the type specified in the URI.
The main cache_bench code is packaged into a separate library, similar to db_bench.
An example invocation of db_bench with a secondary cache URI -
```db_bench --env_uri=ws://ws.flash_sandbox.vll1_2/ -db=anand/nvm_cache_2 -use_existing_db=true -benchmarks=readrandom -num=30000000 -key_size=32 -value_size=256 -use_direct_reads=true -cache_size=67108864 -cache_index_and_filter_blocks=true -secondary_cache_uri='cachelibwrapper://filename=/home/anand76/nvm_cache/cache_file;size=2147483648;regionSize=16777216;admPolicy=random;admProbability=1.0;volatileSize=8388608;bktPower=20;lockPower=12' -partition_index_and_filters=true -duration=1800```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8312
Reviewed By: zhichao-cao
Differential Revision: D28544325
Pulled By: anand1976
fbshipit-source-id: 8f209b9af900c459dc42daa7a610d5f00176eeed
Summary:
This patch does two things:
1) Introduces some aliases in order to eliminate/prevent long-winded type names
w/r/t the internal table property collectors (see e.g.
`std::vector<std::unique_ptr<IntTblPropCollectorFactory>>`).
2) Makes it possible to apply only a subrange of table property collectors during
table building by turning `TableBuilderOptions::int_tbl_prop_collector_factories`
from a pointer to a `vector` into a range (i.e. a pair of iterators).
Rationale: I plan to introduce a BlobDB related table property collector, which
should only be applied during table creation if blob storage is enabled at the moment
(which can be changed dynamically). This change will make it possible to include/
exclude the BlobDB related collector as needed without having to introduce
a second `vector` of collectors in `ColumnFamilyData` with pretty much the same
contents.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8298
Test Plan: `make check`
Reviewed By: jay-zhuang
Differential Revision: D28430910
Pulled By: ltamasi
fbshipit-source-id: a81d28f2c59495865300f43deb2257d2e6977c8e
Summary:
As a part of tiered storage, writing tempeature information to manifest is needed so that after DB recovery, RocksDB still has the tiering information, to implement some further necessary functionalities.
Also fix some issues in simulated hybrid FS.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8284
Test Plan: Add a new unit test to validate that the information is indeed written and read back.
Reviewed By: zhichao-cao
Differential Revision: D28335801
fbshipit-source-id: 56aeb2e6ea090be0200181dd968c8a7278037def
Summary:
In https://github.com/facebook/rocksdb/issues/8268, the `db_stress` stdout began containing both the strings
"fail" and "error" (case-insensitive). The whitebox crash test
failed upon seeing either of those strings.
I checked that all other occurrences of "fail" and "error"
(case-insensitive) that `db_stress` produces are printed to `stderr`. So
this PR separates the handling of `db_stress`'s stdout and stderr, and
only fails when one those bad strings are found in stderr.
The downside of this PR is `db_stress`'s original interleaving of stdout/stderr is not preserved in `db_crashtest.py`'s output.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8272
Test Plan:
run it; see it succeeds for several runs until encountering a real error
```
$ python3 tools/db_crashtest.py whitebox --simple --random_kill_odd=8887 --max_key=1000000 --value_size_mult=33
...
db_stress: cache/clock_cache.cc:483: bool rocksdb::{anonymous}::ClockCacheShard::Unref(rocksdb::{anonymous}::CacheHandle*, bool, rocksdb::{anonymous}::CleanupContext*): Assertion `CountRefs(flags) > 0' failed.
TEST FAILED. Output has 'fail'!!!
```
Reviewed By: zhichao-cao
Differential Revision: D28239233
Pulled By: ajkr
fbshipit-source-id: 3b8602a0d570466a7e2c81bb9c49468f7716091e
Summary:
The ImmutableCFOptions contained a bunch of fields that belonged to the ImmutableDBOptions. This change cleans that up by introducing an ImmutableOptions struct. Following the pattern of Options struct, this class inherits from the DB and CFOption structs (of the Immutable form).
Only one structural change (the ImmutableCFOptions::fs was changed to a shared_ptr from a raw one) is in this PR. All of the other changes involve moving the member variables from the ImmutableCFOptions into the ImmutableOptions and changing member variables or function parameters as required for compilation purposes.
Follow-on PRs may do a further clean-up of the code, such as renaming variables (such as "ImmutableOptions cf_options") and potentially eliminating un-needed function parameters (there is no longer a need to pass both an ImmutableDBOptions and an ImmutableOptions to a function).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8262
Reviewed By: pdillinger
Differential Revision: D28226540
Pulled By: mrambacher
fbshipit-source-id: 18ae71eadc879dedbe38b1eb8e6f9ff5c7147dbf
Summary:
In testing for https://github.com/facebook/rocksdb/issues/8225 I found cache_bench would crash with
-use_clock_cache, as well as db_bench -use_clock_cache, but not
single-threaded. Smaller cache size hits failure much faster. ASAN
reported the failuer as calling malloc_usable_size on the `key` pointer
of a ClockCache handle after it was reportedly freed. On detailed
inspection I found this bad sequence of operations for a cache entry:
state=InCache=1,refs=1
[thread 1] Start ClockCacheShard::Unref (from Release, no mutex)
[thread 1] Decrement ref count
state=InCache=1,refs=0
[thread 1] Suspend before CalcTotalCharge (no mutex)
[thread 2] Start UnsetInCache (from Insert, mutex held)
[thread 2] clear InCache bit
state=InCache=0,refs=0
[thread 2] Calls RecycleHandle (based on pre-updated state)
[thread 2] Returns to Insert which calls Cleanup which deletes `key`
[thread 1] Resume ClockCacheShard::Unref
[thread 1] Read `key` in CalcTotalCharge
To fix this, I've added a field to the handle to store the metadata
charge so that we can efficiently remember everything we need from
the handle in Unref. We must not read from the handle again if we
decrement the count to zero with InCache=1, which means we don't own
the entry and someone else could eject/overwrite it immediately.
Note before this change, on amd64 sizeof(Handle) == 56 even though there
are only 48 bytes of data. Grouping together the uint32_t fields would
cut it down to 48, but I've added another uint32_t, which takes it
back up to 56. Not a big deal.
Also fixed DisownData to cooperate with ASAN as in LRUCache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8261
Test Plan:
Manual + adding use_clock_cache to db_crashtest.py
Base performance
./cache_bench -use_clock_cache
Complete in 17.060 s; QPS = 2458513
New performance
./cache_bench -use_clock_cache
Complete in 17.052 s; QPS = 2459695
Any difference is easily buried in small noise.
Crash test shows still more bug(s) in ClockCache, so I'm expecting to
disable ClockCache from production code in a follow-up PR (if we
can't find and fix the bug(s))
Reviewed By: mrambacher
Differential Revision: D28207358
Pulled By: pdillinger
fbshipit-source-id: aa7a9322afc6f18f30e462c75dbbe4a1206eb294
Summary:
As the first part of the effort of having placing different files on different storage types, this change introduces several things:
(1) An experimental interface in FileSystem that specify temperature to a new file created.
(2) A test FileSystemWrapper, SimulatedHybridFileSystem, that simulates HDD for a file of "warm" temperature.
(3) A simple experimental feature ColumnFamilyOptions.bottommost_temperature. RocksDB would pass this value to FileSystem when creating any bottommost file.
(4) A db_bench parameter that applies the (2) and (3) to db_bench.
The motivation of the change is to introduce minimal changes that allow us to evolve tiered storage development.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8222
Test Plan:
./db_bench --benchmarks=fillrandom --write_buffer_size=2000000 -max_bytes_for_level_base=20000000 -level_compaction_dynamic_level_bytes --reads=100 -compaction_readahead_size=20000000 --reads=100000 -num=10000000
followed by
./db_bench --benchmarks=readrandom,stats --write_buffer_size=2000000 -max_bytes_for_level_base=20000000 -simulate_hybrid_fs_file=/tmp/warm_file_list -level_compaction_dynamic_level_bytes -compaction_readahead_size=20000000 --reads=500 --threads=16 -use_existing_db --num=10000000
and see results as expected.
Reviewed By: ajkr
Differential Revision: D28003028
fbshipit-source-id: 4724896d5205730227ba2f17c3fecb11261744ce
Summary:
Add `num_levels`, `is_bottommost`, and table file creation
`reason` to `FilterBuildingContext`, in anticipation of more powerful
Bloom-like filter support.
To support this, added `is_bottommost` and `reason` to
`TableBuilderOptions`, which allowed removing `reason` parameter from
`rocksdb::BuildTable`.
I attempted to remove `skip_filters` from `TableBuilderOptions`, because
filter construction decisions should arise from options, not one-off
parameters. I could not completely remove it because the public API for
SstFileWriter takes a `skip_filters` parameter, and translating this
into an option change would mean awkwardly replacing the table_factory
if it is BlockBasedTableFactory with new filter_policy=nullptr option.
I marked this public skip_filters option as deprecated because of this
oddity. (skip_filters on the read side probably makes sense.)
At least `skip_filters` is now largely hidden for users of
`TableBuilderOptions` and is no longer used for implementing the
optimize_filters_for_hits option. Bringing the logic for that option
closer to handling of FilterBuildingContext makes it more obvious that
hese two are using the same notion of "bottommost." (Planned:
configuration options for Bloom-like filters that generalize
`optimize_filters_for_hits`)
Recommended follow-up: Try to get away from "bottommost level" naming of
things, which is inaccurate (see
VersionStorageInfo::RangeMightExistAfterSortedRun), and move to
"bottommost run" or just "bottommost."
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8246
Test Plan:
extended an existing unit test to exercise and check various
filter building contexts. Also, existing tests for
optimize_filters_for_hits validate some of the "bottommost" handling,
which is now closely connected to FilterBuildingContext::is_bottommost
through TableBuilderOptions::is_bottommost
Reviewed By: mrambacher
Differential Revision: D28099346
Pulled By: pdillinger
fbshipit-source-id: 2c1072e29c24d4ac404c761a7b7663292372600a
