Summary:
We haven't been populating `NO_FILE_CLOSES` since v1.5.8 even though it was never marked as deprecated. Start populating it again. Conveniently `DeleteTableReader` has an unused `void*` argument that we can use...
Blame: 63f216ee0aCloses#4700.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4703
Differential Revision: D13146769
Pulled By: ajkr
fbshipit-source-id: ad8d6fb0493e701f60a165a3bca1787d255be008
Summary:
…ons (#4676)"
This reverts commit b32d087dbb.
`MemoryAllocator` needs to be with `Cache`, since cache entry can
outlive DB and block based table. The cache needs to hold reference to
memory allocator when deleting cache entry.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4697
Differential Revision: D13133490
Pulled By: yiwu-arbug
fbshipit-source-id: 8ef7e8a51263bfd929f892fd062665ff4ce9ce5a
Summary:
The old RangeDelAggregator did expensive pre-processing work
to create a collapsed, binary-searchable representation of range
tombstones. With FragmentedRangeTombstoneIterator, much of this work is
now unnecessary. RangeDelAggregatorV2 takes advantage of this by seeking
in each iterator to find a covering tombstone in ShouldDelete, while
doing minimal work in AddTombstones. The old RangeDelAggregator is still
used during flush/compaction for now, though RangeDelAggregatorV2 will
support those uses in a future PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4649
Differential Revision: D13146964
Pulled By: abhimadan
fbshipit-source-id: be29a4c020fc440500c137216fcc1cf529571eb3
Summary:
Since a range tombstone seen at one level will cover all keys
in the range at lower levels, there was a short-circuiting check in Get
that reported a key was not found at most one file after the range
tombstone was discovered. However, this was incorrect for merge
operands, since a deletion might only cover some merge operands,
which implies that the key should be found. This PR fixes this logic in
the Version portion of Get, and removes the logic from the MemTable
portion of Get, since the perforamnce benefit provided there is minimal.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4698
Differential Revision: D13142484
Pulled By: abhimadan
fbshipit-source-id: cbd74537c806032f2bfa564724d01a80df7c8f10
Summary:
- Added back the `NO_ITERATORS` that was removed in 5945e16dfc.
- Marked it as deprecated since it is no longer populated, but kept for API compatibility.
- Made sure the new tickers, `NO_ITERATOR_CREATED` and `NO_ITERATOR_DELETED`, are appended at the end of the enum, in case people are relying on the int values.
The change where `NO_ITERATOR_CREATED` and `NO_ITERATOR_DELETED` were introduced is unreleased so I believe it is ok to change their ordering.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4701
Differential Revision: D13142887
Pulled By: ajkr
fbshipit-source-id: 29a336ce5b46632ce50ad42ccc4a29013f71d6d6
Summary:
Found a callsite for `moo_translate` in the Scuba warnings and realized we have a few calls to `define()` left in fbcode.
- I ran the `DefineCodemod` script against fbcode
- Fixed broken tests, and ensured that tests that are explicitly testing the behaviour of `define()` were not changed.
bypass-lint
Reviewed By: kmeht
Differential Revision: D12968447
fbshipit-source-id: d8fd3649a2ce9868b8938d293e1bebf1a6d2fad8
Summary:
WriteBufferManger is not invoked when allocating memory for memtable if the limit is not set even if a cache is passed. It is inconsistent from the comment syas. Fix it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4695
Differential Revision: D13112722
Pulled By: siying
fbshipit-source-id: 0b27eef63867f679cd06033ea56907c0569597f4
Summary:
This is a quick fix for the uninitialized bugs in `LiveFileMetaData` and `SstFileMetaData` that were uncovered in #4686.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4693
Differential Revision: D13113189
Pulled By: ajkr
fbshipit-source-id: 18e798d031d2a59d0b55fc010c135e0126f4042d
Summary:
This fixes an assertion.
An atomic flush can have multiple flush jobs. Some of them may fail. If any of
them fails, we need to rollback all of them.
For the flush jobs that do fail, we already call `RollbackMemTableFlush` in
`FlushJob::Run`. The tricky part is for flush jobs that have completed
successfully. We need to call `RollbackMemTableFlush` for them as well.
The newly added DBAtomicFlushTest.AtomicFlushRollbackSomeJobs will SigAbort
without the corresponding change in AtomicFlushMemTablesToOutputFiles.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4641
Differential Revision: D12943649
Pulled By: riversand963
fbshipit-source-id: c66a4a664a1e0938e938fd41edc5a70c34cdd868
Summary:
Rather than storing a `vector<RangeTombstone>`, we now store a
`vector<RangeTombstoneStack>` and a `vector<SequenceNumber>`. A
`RangeTombstoneStack` contains the start and end keys of a range tombstone
fragment, and indices into the seqnum vector to indicate which sequence
numbers the fragment is located at. The diagram below illustrates an
example:
```
tombstones_: [a, b) [c, e) [h, k)
| \ / \ / |
| \ / \ / |
v v v v
tombstone_seqs_: [ 5 3 10 7 2 8 6 ]
```
This format allows binary searching the tombstone list to use less key
comparisons, which helps in cases where there are many overlapping
tombstones. Also, this format makes it easier to add DBIter-like
semantics to `FragmentedRangeTombstoneIterator` in the future.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4632
Differential Revision: D13053103
Pulled By: abhimadan
fbshipit-source-id: e8220cc712fcf5be4d602913bb23ace8ea5f8ef0
Summary:
DBTest.SanitizeNumThreads Sometimes fails. The test waited for 10ms timeout and expect all threads scheduled to be executed. This can be a source of flakiness. Make a check every 1ms and up to 10s.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4659
Differential Revision: D13074174
Pulled By: siying
fbshipit-source-id: b1d5ff87a326a4fc9eab8d1cc307bbb940dfe70c
Summary:
The new flag makes it possible to constrain iterator traversal
by the upper/lower bound the iterator is expected to pass. This allows
seekrandom results to be more easily comparable between DBs with and
without deletions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4660
Differential Revision: D13053111
Pulled By: abhimadan
fbshipit-source-id: 33e250f2e2d210b54c7726399da30a33f723c33c
Summary:
When iterator becomes invalid, there are two possibilities.
First, all data in the column family have been scanned and there is nothing
more to scan.
Second, an underlying error has occurred, causing `status()` to be !ok.
Therefore, we need to check for both cases when `!iter->Valid()`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4648
Differential Revision: D12959601
Pulled By: riversand963
fbshipit-source-id: 49c9382c9ea9e78f2e2b6f3708f0670b822ca8dd
Summary:
`GenSubcompactionBoundaries` calls `VersionSet::ApproximateSize` which gets BlockBasedTableReader for every file and seeks in its index block to find `key`'s offset. If the table or index block aren't in memory already, this involves I/O. This can be improved by releasing DB mutex when calling ApproximateSize.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4630
Differential Revision: D13052653
Pulled By: miasantreble
fbshipit-source-id: cae31d46d10d0860fa8a26b8d5154b2d17d1685f
Summary:
We carry compression type and "cachable" variables for every block in the block cache, while they take well-known values. 8-byte is wasted for each block (2-byte for useful information but it takes 8 bytes because of padding). With this change, these two variables are removed.
The cachable information is only useful in the process of reading the block. We use other information to infer from it. For compressed blocks, the compression type is a part of the block content itself so we can get it from there.
Some code is slightly refactored so that the cachable information can flow better.
Another change is to only use class BlockContents for compressed block, and narrow the class Block to only be used for uncompressed blocks, including blocks in compressed block cache. This can make the Block class less confusing. It also saves tens of bytes for each block in compressed block cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4650
Differential Revision: D12969070
Pulled By: siying
fbshipit-source-id: 548b62724e9eb66993026429fd9c7c3acd1f95ed
Summary:
Currently transaction iterator does not apply `ReadOptions.iterate_upper_bound` when iterating. This PR attempts to fix the problem by having `BaseDeltaIterator` enforcing the upper bound check when iterator state is changed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4656
Differential Revision: D13039257
Pulled By: miasantreble
fbshipit-source-id: 909eb9f6b4597a4d80418fb139f32ec82c6ec1d1
Summary:
It called the autovector::push_back simply in autovector::emplace_back.
This was not efficient, and then optimazed this function through the
perfect forwarding.
This was the src and result of the benchmark(using the google'benchmark library, the type of elem in
autovector was std::string, and call emplace_back with the "char *" type):
https://gist.github.com/monadbobo/93448b89a42737b08cbada81de75c5cd
PS: The benchmark's result of previous PR was not accurate, and so I update the test case and result.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4606
Differential Revision: D13046813
Pulled By: sagar0
fbshipit-source-id: 19cde1bcadafe899aa454b703acb35737a1cc02d
Summary:
Per offline discussion with siying, `MemoryAllocator` and `Cache` should be decouple. The idea is that memory allocator handles memory allocation, while cache handle cache policy.
It is normal that external cache libraries pack couple the two components for better optimization. If we want to integrate with such library in the future, we can make a wrapper of the library implementing both `Cache` and `MemoryAllocator` interface.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4676
Differential Revision: D13047662
Pulled By: yiwu-arbug
fbshipit-source-id: cd42e246d80ab600b4de47d073f7d2db308ce6dd
Summary:
We used to have a bug, which caused every block to be read twice, and none of our tests caught it. Add a very simply unit test to make sure that when reading a data block, we only issue one pread against the SST file.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4657
Differential Revision: D13005260
Pulled By: siying
fbshipit-source-id: 03167b554ad2451192b1707415536d7d05e9026c
Summary:
As pointed out in #4059, we miss use string as buffer for file read. Changing to use char array instead.
Closing #4059
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4662
Differential Revision: D13012998
Pulled By: yiwu-arbug
fbshipit-source-id: 41234ba17c0bccea65bd647e362a0e979152bd1e
Summary:
he ratio of num_deletions to num_entries of a level can be useful to determine if a manual compaction needs to be triggered on a level.
Also refer #3980
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4623
Differential Revision: D13045744
Pulled By: sagar0
fbshipit-source-id: 71f3c8e363a8ffd194ec3bb0ed0b69612231f0b3
Summary:
Currently, `Statistics` can record tick by `recordTick()` whose second parameter is an `uint64_t`.
That means tick can only increase.
If we want to reduce tick, we have to work around like `RecordTick(statistics_, NO_ITERATORS, uint64_t(-1));`.
That's kind of a hack.
So, this PR divide `NO_ITERATORS` into two counters `NO_ITERATOR_CREATED` and `NO_ITERATOR_DELETE`, making the counters increase only.
Fixes#3013 .
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4498
Differential Revision: D10395010
Pulled By: sagar0
fbshipit-source-id: cfb523b22a37411c794b4e9da090f1ae30293db2
Summary:
Call `SyncClosedLogs()` only if there are more than one column families.
Update several unit tests (in `fault_injection_test` and `db_flush_test`) correspondingly.
See #3840 for more info.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4460
Differential Revision: D12896377
Pulled By: riversand963
fbshipit-source-id: f49afdaec32568f12f001219a3aec1dfde3b32bf
Summary:
Use the `DBOptions` that the backup engine already holds to figure out the right `EnvOptions` to use when reading the DB files. This means that, if a user opened a DB instance with `use_direct_reads=true`, then using `BackupEngine` to back up that DB instance will use direct I/O to read files when calculating checksums and copying. Currently the WALs and manifests would still be read using buffered I/O to prevent mixing direct I/O reads with concurrent buffered I/O writes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4640
Differential Revision: D13015268
Pulled By: ajkr
fbshipit-source-id: 77006ad6f3e00ce58374ca4793b785eea0db6269
Summary:
this PR adds two more per-level perf context counters to track
* number of keys returned in Get call, break down by levels
* total processing time at each level during Get call
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4617
Differential Revision: D12898024
Pulled By: miasantreble
fbshipit-source-id: 6b84ef1c8097c0d9e97bee1a774958f56ab4a6c4
Summary:
Our internal CI test caught RocksDB Lite build failures. The failures are due to a new test introduced in #4665 using `SSTFileWriter` and `IngestExternalFile`, but these is not exposed under lite mode. Fixed by #ifdef'ing out the test.
```
db/db_test2.cc: In member function ‘virtual void rocksdb::DBTest2_TestCompactFiles_Test::TestBody()’:
db/db_test2.cc:2907:3: error: ‘SstFileWriter’ is not a member of ‘rocksdb’
rocksdb::SstFileWriter sst_file_writer{rocksdb::EnvOptions(), options};
^
In file included from ./util/testharness.h:15:0,
from ./table/mock_table.h:23,
from ./db/db_test_util.h:44,
from db/db_test2.cc:13:
db/db_test2.cc:2912:13: error: ‘sst_file_writer’ was not declared in this scope
ASSERT_OK(sst_file_writer.Open(external_file1));
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4675
Differential Revision: D13035984
Pulled By: sagar0
fbshipit-source-id: c1ceac550dfac1a85eeea436693dc7dd467519a6
Summary:
In #4652 we are setting -Os for lite builds only when LITE=1 is specified. But currently almost all the users invoke lite build via OPT="-DROCKSDB_LITE=1". So this diff tries to set LITE=1 when users already pass in -DROCKSDB_LITE=1 via the command line.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4671
Differential Revision: D13033801
Pulled By: sagar0
fbshipit-source-id: e7b506cee574f9e3f42221ee6647915011c78d78
Summary:
Part of the test required that a compaction start before a
manual flush, but this was not enforced by the test. In some cases,
particularly when writing to tmpfs, this could lead to the compaction
starting after the flush, which caused the base level to be higher than
it was expected to be. Add a sync point in the test to ensure that the
flush and compaction happen simultaneously.
The test also had some stale comments, so those have been removed or
modified, and the test has been simplified so that it no longer uses sleeps
and writes uncompressed SSTs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4668
Differential Revision: D13032440
Pulled By: abhimadan
fbshipit-source-id: 3f23b583a096454dafb8d8ea75678605dec80209
Summary:
`CompactFiles` gets `SuperVersion` before `WaitForIngestFile`, while `IngestExternalFile` may add files that overlap with `input_file_names`
The timeline of execution flow is as follow:
Let's say that level N has two file [1,2] and [5,6]
```
timeline user_thread1 user_thread2
t0 | CompactFiles([1, 2], [5, 6]) begin
t1 | GetReferencedSuperVersion()
t2 | IngestExternalFile([3,4]) to level N begin
t3 | CompactFiles resume
V
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4665
Differential Revision: D13030674
Pulled By: ajkr
fbshipit-source-id: 8be19477fd6e505032267a979d32f3097cc3be51
Summary:
In the past, both `DBImpl::atomic_flush_` and
`DBImpl::immutable_db_options_.atomic_flush` exist. However, we fail to set
`immutable_db_options_.atomic_flush`, but use `DBImpl::atomic_flush_` which is
set correctly. This does not lead to incorrect behavior, but is a duplicate of
information.
Since `immutable_db_options_` is always there and has `atomic_flush`, we should
use it as source of truth and remove `DBImpl::atomic_flush_`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4631
Differential Revision: D12928371
Pulled By: riversand963
fbshipit-source-id: f85a811959d3828aad4a3a1b05f71facf19c636d
Summary:
Hi, yiwu-arbug, I found that `DBImpl::GetColumnFamilyHandleUnlocked` still have data race condition, because `column_family_memtables_` has a stateful cache `current_` and `column_family_memtables_::Seek` maybe call without the protection of `mutex_` by a write thread
check 859dbda6e3/db/write_batch.cc (L1188) and 859dbda6e3/db/write_batch.cc (L1756) and 859dbda6e3/db/db_impl_write.cc (L318)
So it's better to use `versions_->GetColumnFamilySet()->GetColumnFamily` instead.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4666
Differential Revision: D13027117
Pulled By: yiwu-arbug
fbshipit-source-id: 4e3778eaf8e7f7c8577bbd78129b6a5fd7ce79fb
Summary:
Changes:
1. in current version, key size distribution is printed out as the result. In this change, the result will be output to a file to make further analyze easier
2. To understand how the unique keys are accessed over time, the total unique key number of each CF of each query type in each second over time is output to a file. In this way, user could know when the unique keys are accessed frequently or accessed rarely.
3. output the total QPS of each CF to a file
4. Add the print result of total queries of each CF of each query type.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4646
Differential Revision: D12968156
Pulled By: zhichao-cao
fbshipit-source-id: 6c411c7ec47c7843a70929136efd71a150db0e4c
Summary:
The flakyness can be reproduced with the following patch:
```
--- a/db/db_impl_compaction_flush.cc
+++ b/db/db_impl_compaction_flush.cc
@@ -2013,6 +2013,9 @@ void DBImpl::BackgroundCallFlush() {
if (job_context.HaveSomethingToDelete()) {
PurgeObsoleteFiles(job_context);
}
+ static int f_count = 0;
+ printf("clean flush job context %d\n", ++f_count);
+ env_->SleepForMicroseconds(1000000);
job_context.Clean();
mutex_.Lock();
}
```
The issue is that FlushMemtable with opt.wait=true does not wait for `OnStallConditionsChanged` being called. The event listener is triggered on `JobContext::Clean`, which happens after flush result is installed. At the time we check for stall condition after flushing memtable, the job context cleanup may not be finished.
To fix the flaykyness, we use sync point to create a custom WaitForFlush that waits for context cleanup.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4658
Differential Revision: D13007301
Pulled By: yiwu-arbug
fbshipit-source-id: d98395ee7b0ad4c62e83e8d0e9b6028058c61712
Summary:
When running `make shared_lib` under fbcode, there's liblua link error: https://gist.github.com/yiwu-arbug/b796bff6b3d46d90c1ed878d983de50d
This is because we link liblua.a when building shared lib. If we want to link with liblua, we need to link with liblua_pic.a instead. Fixing by simply not link with lua.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4651
Differential Revision: D12964798
Pulled By: yiwu-arbug
fbshipit-source-id: 18d6cee94afe20748068822b76e29ef255cdb04d
Summary:
Updated the comments around all options which are currently dynamic.
Without explicitly specifying in the comments around the options, its hard for RocksDB users to know if an option is dynamically changeable or not unless they dig into the implementation details.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4653
Differential Revision: D12966735
Pulled By: sagar0
fbshipit-source-id: 1a01acbf6fe506b989e71629ce223f9803ebae27
Summary:
Ran the following commands to recursively change all the files under RocksDB:
```
find . -type f -name "*.cc" -exec sed -i 's/ unique_ptr/ std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<unique_ptr/<std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/ shared_ptr/ std::shared_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<shared_ptr/<std::shared_ptr/g' {} +
```
Running `make format` updated some formatting on the files touched.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4638
Differential Revision: D12934992
Pulled By: sagar0
fbshipit-source-id: 45a15d23c230cdd64c08f9c0243e5183934338a8
Summary:
We already exercised backup functionality in `db_stress` according to the `-backup_one_in` flag. This PR verifies the backup can be restored/opened and sanity checks a few keys. Changes in this PR:
- Extracted existing backup-related logic to a helper function, `TestBackupRestore`
- Added restore logic, which targets a hidden directory named "./.restore\<thread number\>", similar to how backups target hidden directories named "./.backup\<thread number\>".
- After restore, check the existence/non-existence of a few keys.
- With this PR, backup is no longer compatible with clearing column families.
- Also included unrelated fixes to set `ReadOptions::total_order_seek=true` when using `-compare_full_db_state_snapshot`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4655
Differential Revision: D12972496
Pulled By: ajkr
fbshipit-source-id: 481a40052d9a38d1bd5c5159aa4d7c5a4b546b80
Summary:
Ensure delete[] and not delete is called on buffer_, as it is reset with new char[buffer_size_].
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4647
Differential Revision: D12961327
Pulled By: ajkr
fbshipit-source-id: c1af373b98359edfdc291caebe4e0acdfb8afdd8
Summary:
valgrind tests with 1 thread run too long. To make it shorter, black list some long tests. These are already blacklisted in parallel valgrind tests, but they are not in non-parallel mode
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4642
Differential Revision: D12945237
Pulled By: siying
fbshipit-source-id: 04cf977d435996480fe87aa09f14b17975b74f7d
Summary:
Move the line `Add xxhash64 checksum support` to `Unreleased` section because it has not been released to 5.17.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4627
Differential Revision: D12944123
Pulled By: riversand963
fbshipit-source-id: 2762857065b9e741c64ff8b6116ca62fe31891d8
Summary:
When evicting an entry form the commit_cache, it is verified against the list of old snapshots to see if it overlaps with any. The list of old snapshots is split into two lists: an efficient concurrent cache and an slow vector protected by a lock. The patch fixes a bug that would stop the search in the cache if it finds any and yet would not include the larger snapshots in the slower list.
An extra info log entry is also removed. The condition to trigger that although very rare is still feasible and should not spam the LOG when that happens.
Fixes#4621
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4639
Differential Revision: D12934989
Pulled By: maysamyabandeh
fbshipit-source-id: 4e0fe8147ba292b554ae78e94c21c2ef31e03e2d
