Commit Graph

3088 Commits

Author SHA1 Message Date
Aaron Gao
2d42cf5ea9 Roundup read bytes in ReadaheadRandomAccessFile
Summary:
Fix alignment in ReadaheadRandomAccessFile
Closes https://github.com/facebook/rocksdb/pull/2253

Differential Revision: D5012336

Pulled By: lightmark

fbshipit-source-id: 10d2c829520cb787227ef653ef63d5d701725778
2017-05-05 12:14:14 -07:00
Siying Dong
264d3f540c Allow IntraL0 compaction in FIFO Compaction
Summary:
Allow an option for users to do some compaction in FIFO compaction, to pay some write amplification for fewer number of files.
Closes https://github.com/facebook/rocksdb/pull/2163

Differential Revision: D4895953

Pulled By: siying

fbshipit-source-id: a1ab608dd0627211f3e1f588a2e97159646e1231
2017-05-04 18:16:13 -07:00
Andrew Kryczka
8c3a180e83 Set lower-bound on dynamic level sizes
Summary:
Changed dynamic leveling to stop setting the base level's size bound below `max_bytes_for_level_base`.

Behavior for config where `max_bytes_for_level_base == level0_file_num_compaction_trigger * write_buffer_size` and same amount of data in L0 and base-level:

- Before #2027, compaction scoring would favor base-level due to dividing by size smaller than `max_bytes_for_level_base`.
- After #2027, L0 and Lbase get equal scores. The disadvantage is L0 is often compacted before reaching the num files trigger since `write_buffer_size` can be bigger than the dynamically chosen base-level size. This increases write-amp.
- After this diff, L0 and Lbase still get equal scores. Now it takes `level0_file_num_compaction_trigger` files of size `write_buffer_size` to trigger L0 compaction by size, fixing the write-amp problem above.
Closes https://github.com/facebook/rocksdb/pull/2123

Differential Revision: D4861570

Pulled By: ajkr

fbshipit-source-id: 467ddef56ed1f647c14d86bb018bcb044c39b964
2017-05-04 18:16:12 -07:00
Andrew Kryczka
7c1c8ce5ac Avoid calling fallocate with UINT64_MAX
Summary:
When user doesn't set a limit on compaction output file size, let's use the sum of the input files' sizes. This will avoid passing UINT64_MAX as fallocate()'s length. Reported in #2249.

Test setup:
- command: `TEST_TMPDIR=/data/rocksdb-test/ strace -e fallocate ./db_compaction_test --gtest_filter=DBCompactionTest.ManualCompactionUnknownOutputSize`
- filesystem: xfs

before this diff:
`fallocate(10, 01, 0, 1844674407370955160) = -1 ENOSPC (No space left on device)`

after this diff:
`fallocate(10, 01, 0, 1977)              = 0`
Closes https://github.com/facebook/rocksdb/pull/2252

Differential Revision: D5007275

Pulled By: ajkr

fbshipit-source-id: 4491404a6ae8a41328aede2e2d6f4d9ac3e38880
2017-05-04 17:43:22 -07:00
Leonidas Galanis
a45e98a5b5 max_open_files dynamic set, follow up
Summary:
Followup to make 0x40000 a TableCache constant that indicates infinite capacity
Closes https://github.com/facebook/rocksdb/pull/2247

Differential Revision: D5001349

Pulled By: lgalanis

fbshipit-source-id: ce7bd2e54b0975bb9f8680fdaa0f8bb0e7ae81a2
2017-05-04 10:42:45 -07:00
Leonidas Galanis
e7ae4a3a02 Max open files mutable
Summary:
Makes max_open_files db option dynamically set-able by SetDBOptions. During the call of SetDBOptions we call SetCapacity on the table cache, which is a LRUCache.
Closes https://github.com/facebook/rocksdb/pull/2185

Differential Revision: D4979189

Pulled By: yiwu-arbug

fbshipit-source-id: ca7e8dc5e3619c79434f579be4847c0f7e56afda
2017-05-03 21:13:14 -07:00
siddontang
b551104e04 support PopSavePoint for WriteBatch
Summary:
Try to fix https://github.com/facebook/rocksdb/issues/1969
Closes https://github.com/facebook/rocksdb/pull/2170

Differential Revision: D4907333

Pulled By: yiwu-arbug

fbshipit-source-id: 417b420ff668e6c2fd0dad42a94c57385012edc5
2017-05-03 10:57:45 -07:00
Siying Dong
af6fe69e4c Fix an issue of manual / auto compaction data race
Summary:
A data race between a manual and an auto compaction can cause a scheduled automatic compaction to be cancelled and never rescheduled again. This may cause a condition of hanging forever. Fix this by always making sure the cancelled compaction is put back to the compaction queue.
Closes https://github.com/facebook/rocksdb/pull/2238

Differential Revision: D4984591

Pulled By: siying

fbshipit-source-id: 3ab153886403c7b991896dcb2158b96cac12f227
2017-05-02 15:11:59 -07:00
Siying Dong
aeaba07b2a Remove an assert that causes TSAN failure.
Summary:
ColumnFamilyData::ConstructNewMemtable is called out of DB mutex, and it asserts current_ is not empty, but current_ should only be accessed inside DB mutex. Remove this assert to make TSAN happy.
Closes https://github.com/facebook/rocksdb/pull/2235

Differential Revision: D4978531

Pulled By: siying

fbshipit-source-id: 423685a7dae88ed3faaa9e1b9ccb3427ac704a4b
2017-05-01 16:35:15 -07:00
Siying Dong
d616ebea23 Add GPLv2 as an alternative license.
Summary: Closes https://github.com/facebook/rocksdb/pull/2226

Differential Revision: D4967547

Pulled By: siying

fbshipit-source-id: dd3b58ae1e7a106ab6bb6f37ab5c88575b125ab4
2017-04-27 18:06:12 -07:00
Aaron Gao
0ca3ead0cb add GetRootDB() in DeleteFilesInRange
Summary:
In case users cast a subclass of db* into dbimpl*
Closes https://github.com/facebook/rocksdb/pull/2222

Differential Revision: D4964486

Pulled By: lightmark

fbshipit-source-id: 0ccdc08ee8e7a193dfbbe0218c3cbfd795662ca1
2017-04-27 14:33:17 -07:00
Dmitri Smirnov
cdad04b051 Remove double buffering on RandomRead on Windows.
Summary:
Remove double buffering on RandomRead on Windows.
  With more logic appear in file reader/write Read no longer
  obeys forwarding calls to Windows implementation.
  Previously direct_io (unbuffered) was only available on Windows
  but now is supported as generic.
  We remove intermediate buffering on Windows.
  Remove random_access_max_buffer_size option which was windows specific.
  Non-zero values for that opton introduced unnecessary lock contention.
  Remove Env::EnableReadAhead(), Env::ShouldForwardRawRequest() that are
  no longer necessary.
  Add aligned buffer reads for cases when requested reads exceed read ahead size.
Closes https://github.com/facebook/rocksdb/pull/2105

Differential Revision: D4847770

Pulled By: siying

fbshipit-source-id: 8ab48f8e854ab498a4fd398a6934859792a2788f
2017-04-27 12:30:05 -07:00
Siying Dong
e15382c09c Disable two flaky tests
Summary: Closes https://github.com/facebook/rocksdb/pull/2217

Differential Revision: D4959351

Pulled By: siying

fbshipit-source-id: ce7c3a430bae0d15e06b3d5c958ebce969d08564
2017-04-26 17:13:46 -07:00
Andrew Kryczka
efc361ef7d Add user stats Reset API
Summary:
It resets all the ticker and histogram stats to zero. Needed to change the locking a bit since Reset() is the only operation that manipulates multiple tickers/histograms together, and that operation should be seen as atomic by other operations that access tickers/histograms.
Closes https://github.com/facebook/rocksdb/pull/2213

Differential Revision: D4952232

Pulled By: ajkr

fbshipit-source-id: c0475c3e4c7b940120d53891b69c3091149a0679
2017-04-26 15:57:01 -07:00
Andrew Kryczka
f6a27d0bce Extract statistics tests into separate file
Summary:
I'm going to add more DB tests for statistics as currently we have very few. I started a file dedicated to this purpose and moved the existing stats-specific tests there.
Closes https://github.com/facebook/rocksdb/pull/2211

Differential Revision: D4951558

Pulled By: ajkr

fbshipit-source-id: 05d11c35079c40ecabdfd2cf5556ccb761f694a4
2017-04-26 14:47:23 -07:00
Aaron Gao
7eddecce12 support bulk loading with universal compaction
Summary:
Support buck load with universal compaction.
More test cases to be added.
Closes https://github.com/facebook/rocksdb/pull/2202

Differential Revision: D4935360

Pulled By: lightmark

fbshipit-source-id: cc3ca1b6f42faa503207dab1408d6bcf393ee5b5
2017-04-26 13:41:32 -07:00
Aaron Gao
72c21fb3f2 call GetRootDB() before cast to DBImpl* in CancelAllBackgroundWork
Summary:
User could call this with wrapper class of DB or DBImpl
Closes https://github.com/facebook/rocksdb/pull/2200

Differential Revision: D4935530

Pulled By: lightmark

fbshipit-source-id: df9cb61d67d0f3bbcf62f714d77523a459a92883
2017-04-24 13:47:17 -07:00
Tomas Kolda
04d58970cb AIX and Solaris Sparc Support
Summary:
Replacement of #2147

The change was squashed due to a lot of conflicts.
Closes https://github.com/facebook/rocksdb/pull/2194

Differential Revision: D4929799

Pulled By: siying

fbshipit-source-id: 5cd49c254737a1d5ac13f3c035f128e86524c581
2017-04-21 20:48:04 -07:00
Aaron Gao
cb885bccfe set compaction_iterator earliest_snapshot to max if no snapshot
Summary:
It is a potential bug that will be triggered if we ingest files before inserting the first key into an empty db.
0 is a special value reserved to indicate the concept of non-existence. But not good for seqno in this case because 0 is a valid seqno for ingestion(bulk loading)
Closes https://github.com/facebook/rocksdb/pull/2183

Differential Revision: D4919827

Pulled By: lightmark

fbshipit-source-id: 237eea40f88bd6487b66806109d90065dc02c362
2017-04-20 19:56:59 -07:00
Andrew Kryczka
1dd7760513 Change L0 compaction score using level size
Summary:
The goal is to avoid the problem of small number of L0 files triggering compaction to base level (which increased write-amp), while still allowing L0 compaction-by-size (so intra-L0 compactions cause score to increase).
Closes https://github.com/facebook/rocksdb/pull/2172

Differential Revision: D4908552

Pulled By: ajkr

fbshipit-source-id: 4b170142b2b368e24bd7948b2a6f24c69fabf73d
2017-04-19 12:00:01 -07:00
Yi Wu
966ebb02f5 Hide event listeners from lite build
Summary:
Fixing lite build failure introduce by #2169.
Closes https://github.com/facebook/rocksdb/pull/2174

Reviewed By: sagar0

Differential Revision: D4910619

Pulled By: yiwu-arbug

fbshipit-source-id: 5213b7b7431cc258688793c8c28153025588d8d9
2017-04-18 17:26:19 -07:00
Siying Dong
c49d704656 Add DB:ResetStats()
Summary:
Add a function to allow users to reset internal stats without restarting the DB.
Closes https://github.com/facebook/rocksdb/pull/2167

Differential Revision: D4907939

Pulled By: siying

fbshipit-source-id: ab2dd85b88aabe9380da7485320a1d460d3e1f68
2017-04-18 16:56:48 -07:00
Yi Wu
0fcdccc33e Blob storage helper methods
Summary:
Split out interfaces needed for blob storage from #1560, including
* CompactionEventListener and OnFlushBegin listener interfaces.
* Blob filename support.
Closes https://github.com/facebook/rocksdb/pull/2169

Differential Revision: D4905463

Pulled By: yiwu-arbug

fbshipit-source-id: 564e73448f1b7a367e5e46216a521e57ea9011b5
2017-04-18 12:42:38 -07:00
Yi Wu
e9e6e53247 Simplify write thread logic
Summary:
The concept about early exit in write thread implementation is a confusing one. It means that if early exit is allowed, batch group leader will not responsible to exit the batch group, but the last finished writer do. In case we need to mark log synced, or encounter memtable insert error, early exit is disallowed.

This patch remove such a concept by:
* In all cases, the last finished writer (not necessary leader) is responsible to exit batch group.
* In case of parallel memtable write, leader will also mark log synced after memtable insert and before signal finish (call `CompleteParallelWorker()`). The purpose is to allow mark log synced (which require locking mutex) can run in parallel to memtable insert in other writers.
* The last finish writer should handle memtable insert error (update bg_error_) before exiting batch group.
Closes https://github.com/facebook/rocksdb/pull/2134

Differential Revision: D4869667

Pulled By: yiwu-arbug

fbshipit-source-id: aec170847c85b90f4179d6a4608a4fe1361544e3
2017-04-13 16:12:04 -07:00
Aaron Gao
44fa8ece9b change use_direct_writes to use_direct_io_for_flush_and_compaction
Summary:
Replace Options::use_direct_writes with Options::use_direct_io_for_flush_and_compaction
Now if Options::use_direct_io_for_flush_and_compaction = true, we will enable direct io for both reads and writes for flush and compaction job. Whereas Options::use_direct_reads controls user reads like iterator and Get().
Closes https://github.com/facebook/rocksdb/pull/2117

Differential Revision: D4860912

Pulled By: lightmark

fbshipit-source-id: d93575a8a5e780cf7e40797287edc425ee648c19
2017-04-13 16:12:04 -07:00
Igor Canadi
b6b9359ece Fix BYTES_WRITTEN accounting
Summary:
BYTES_WRITTEN accounting doesn't work with disabled WAL. For example, this is what we
get in the LOG:

```
Cumulative writes: 9794K writes, 228M keys, 9794K commit groups, 1.0
writes per commit group, ingest: 0.00 GB, 0.00 MB/s
```

WAL bytes are tracked in a different statistic:
https://github.com/facebook/rocksdb/blob/master/db/internal_stats.h#L105.
BYTES_WRITTEN should count all the writes.
Closes https://github.com/facebook/rocksdb/pull/2133

Differential Revision: D4880615

Pulled By: yiwu-arbug

fbshipit-source-id: 8fd0b223099f3f5ad7df79d4e737d313687fec69
2017-04-13 16:12:03 -07:00
Sagar Vemuri
6a6723ee1e Move MergeOperatorPinning tests to be with other merge operator tests
Summary:
Moved MergeOperatorPinning tests from db_test2.cc to db_merge_operator_test.cc.

[This is the same code as PR #2104 , which has already been reviewed,  but I am creating a new PR as I cannot import from #2104 onto phabricator anymore even after rebasing. I'll close and discard #2104.]
Closes https://github.com/facebook/rocksdb/pull/2125

Differential Revision: D4863312

Pulled By: sagar0

fbshipit-source-id: 0f71a7690aa09c1d03ee85ce2bc1d2d89e4f4399
2017-04-11 16:15:06 -07:00
Siying Dong
8f47a97512 File level histogram should be printed per CF, not per DB
Summary:
Currently level histogram is only printed out for DB stats and for default CF. This is confusing. Change to print for every CF instead.
Closes https://github.com/facebook/rocksdb/pull/2126

Differential Revision: D4865373

Pulled By: siying

fbshipit-source-id: 1c853e0ac66e00120ee931cabc9daf69ccc2d577
2017-04-11 08:42:03 -07:00
Manuel Ung
1f8b119ed6 Limit maximum memory used in the WriteBatch representation
Summary:
Extend TransactionOptions to include max_write_batch_size which determines the maximum size of the writebatch representation. If memory limit is exceeded, the operation will abort with subcode kMemoryLimit.
Closes https://github.com/facebook/rocksdb/pull/2124

Differential Revision: D4861842

Pulled By: lth

fbshipit-source-id: 46fd172ea67cc90bbba829bf0d70cfab2261c161
2017-04-10 15:42:26 -07:00
Maysam Yabandeh
20778f2f92 Adding comments to the write path
Summary:
also did minor refactoring
Closes https://github.com/facebook/rocksdb/pull/2115

Differential Revision: D4855818

Pulled By: maysamyabandeh

fbshipit-source-id: fbca6ac57e5c6677fffe8354f7291e596a50cb77
2017-04-10 12:43:34 -07:00
Sagar Vemuri
7124268a09 Reduce the number of params needed to construct DBIter
Summary:
DBIter, and in-turn NewDBIterator and NewArenaWrappedDBIterator, take a  bunch of params. They can be reduced by passing in ReadOptions directly instead of passing in every new param separately. It also seems much cleaner as a bunch of the params towards the end seem to be optional.

(Recently I introduced max_skippable_internal_keys, which added one more to the already huge count).

Idea courtesy IslamAbdelRahman
Closes https://github.com/facebook/rocksdb/pull/2116

Differential Revision: D4857128

Pulled By: sagar0

fbshipit-source-id: 7d239df094b94bd9ea79d145cdf825478ac037a8
2017-04-10 11:14:14 -07:00
Islam AbdelRahman
61730186df dummy diff
Summary: Closes https://github.com/facebook/rocksdb/pull/2114

Differential Revision: D4854860

Pulled By: IslamAbdelRahman

fbshipit-source-id: b871c5b9ccc52d20f5ceacdd172dc70b1dbf9110
2017-04-07 17:07:37 -07:00
Ayappan
dd8f9e38e9 Fix compilation for GCC-5
Summary:
Fixes this issue https://github.com/facebook/rocksdb/issues/2108
Closes https://github.com/facebook/rocksdb/pull/2109

Differential Revision: D4851965

Pulled By: yiwu-arbug

fbshipit-source-id: 6ee807b
2017-04-07 10:54:12 -07:00
Siying Dong
ff97287016 Refactor compaction picker code
Summary:
1. Move universal compaction picker to separate files compaction_picker_universal.cc and compaction_picker_universal.h.
2. Rename some functions to make the code easier to understand.
3. Move leveled compaction picking code to a dedicated class, so that we we don't need to pass some common variable around when calling functions. It also allowed us to break down LevelCompactionPicker::PickCompaction() to smaller functions.
Closes https://github.com/facebook/rocksdb/pull/2100

Differential Revision: D4845948

Pulled By: siying

fbshipit-source-id: efa0ab4
2017-04-06 20:09:34 -07:00
Sagar Vemuri
343b59d6ee Move various string utility functions into string_util
Summary:
This is an effort to club all string related utility functions into one common place, in string_util, so that it is easier for everyone to know what string processing functions are available. Right now they seem to be spread out across multiple modules, like logging and options_helper.

Check the sub-commits for easier reviewing.
Closes https://github.com/facebook/rocksdb/pull/2094

Differential Revision: D4837730

Pulled By: sagar0

fbshipit-source-id: 344278a
2017-04-06 14:54:12 -07:00
Yi Wu
df6f5a3772 Move memtable related files into memtable directory
Summary:
Move memtable related files into memtable directory.
Closes https://github.com/facebook/rocksdb/pull/2087

Differential Revision: D4829242

Pulled By: yiwu-arbug

fbshipit-source-id: ca70ab6
2017-04-06 14:09:13 -07:00
Tamir Duberstein
107c5f6a60 CMake: more MinGW fixes
Summary:
siying this is a resubmission of #2081 with the 4th commit fixed. From that commit message:

> Note that the previous use of quotes in PLATFORM_{CC,CXX}FLAGS was
incorrect and caused GCC to produce the incorrect define:
>
>  #define ROCKSDB_JEMALLOC -DJEMALLOC_NO_DEMANGLE 1
>
> This was the cause of the Linux build failure on the previous version
of this change.

I've tested this locally, and the Linux build succeeds now.
Closes https://github.com/facebook/rocksdb/pull/2097

Differential Revision: D4839964

Pulled By: siying

fbshipit-source-id: cc51322
2017-04-06 14:09:13 -07:00
Siying Dong
d2dce5611a Move some files under util/ to separate dirs
Summary:
Move some files under util/ to new directories env/, monitoring/ options/ and cache/
Closes https://github.com/facebook/rocksdb/pull/2090

Differential Revision: D4833681

Pulled By: siying

fbshipit-source-id: 2fd8bef
2017-04-05 19:09:16 -07:00
Islam AbdelRahman
c50e3750dc Use a human readable size for level report
Summary:
Current
```
** Compaction Stats [default] **
Level    Files   Size(MB} Score Read(GB}  Rn(GB} Rnp1(GB} Write(GB} Wnew(GB} Moved(GB} W-Amp Rd(MB/s} Wr(MB/s} Comp(sec} Comp(cnt} Avg(sec} KeyIn KeyDrop
----------------------------------------------------------------------------------------------------------------------------------------------------------
  L0      2/0      49.02   0.5      0.0     0.0      0.0       0.0      0.0       0.0   0.0      0.0     76.1         1         2    0.322       0      0
 Sum      2/0      49.02   0.0      0.0     0.0      0.0       0.0      0.0       0.0   1.0      0.0     76.1         1         2    0.322       0      0
 Int      0/0       0.00   0.0      0.0     0.0      0.0       0.0      0.0       0.0   1.0      0.0     76.1         1         2    0.322       0      0
```

New
```
** Compaction Stats [default] **
Level    Files   Size     Score Read(GB)  Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) Moved(GB) W-Amp Rd(MB/s) Wr(MB/s) Comp(sec) Comp(cnt) Avg(sec) KeyIn Key
Closes https://github.com/facebook/rocksdb/pull/2055

Differential Revision: D4804576

Pulled By: IslamAbdelRahman

fbshipit-source-id: 719be6a
2017-04-05 17:24:19 -07:00
Siying Dong
ce64b8b719 Divide db/db_impl.cc
Summary:
db_impl.cc is too large to manage. Divide db_impl.cc into db/db_impl.cc, db/db_impl_compaction_flush.cc, db/db_impl_files.cc, db/db_impl_open.cc and db/db_impl_write.cc.
Closes https://github.com/facebook/rocksdb/pull/2095

Differential Revision: D4838188

Pulled By: siying

fbshipit-source-id: c5f3059
2017-04-05 17:24:19 -07:00
Andrew Kryczka
d659faad54 Level-based L0->L0 compaction
Summary:
Level-based L0->L0 compaction operates on spans of files that aren't currently being compacted. It reduces the number of L0 files, thus making write stall conditions harder to reach.

- L0->L0 is triggered when base level is unavailable due to pending compactions
- L0->L0 always outputs one file of at most `max_level0_burst_file_size` bytes.
- Subcompactions are disabled for L0->L0 since we want to output one file.
- Input files are chosen as the longest span of available files that will fit within the size limit. This minimizes number of files in L0.
Closes https://github.com/facebook/rocksdb/pull/2027

Differential Revision: D4760318

Pulled By: ajkr

fbshipit-source-id: 9d07183
2017-04-04 18:09:11 -07:00
Siying Dong
43010a929f Revert "[rocksdb][PR] CMake: more MinGW fixes"
fbshipit-source-id: 43b4529
2017-04-04 16:24:26 -07:00
Tamir Duberstein
3450ac8c1b CMake: more MinGW fixes
Summary:
See individual commits.

yuslepukhin siying
Closes https://github.com/facebook/rocksdb/pull/2081

Differential Revision: D4824639

Pulled By: IslamAbdelRahman

fbshipit-source-id: 2fc2b00
2017-04-04 15:09:17 -07:00
Aaron Gao
90cfd46458 update IterKey that can get user key and internal key explicitly
Summary:
to void future bug that caused by the mix of userkey/internalkey
Closes https://github.com/facebook/rocksdb/pull/2084

Differential Revision: D4825889

Pulled By: lightmark

fbshipit-source-id: 28411db
2017-04-04 14:24:20 -07:00
Yi Wu
9e44531803 Refactor WriteImpl (pipeline write part 1)
Summary:
Refactor WriteImpl() so when I plug-in the pipeline write code (which is
an alternative approach for WriteThread), some of the logic can be
reuse. I split out the following methods from WriteImpl():

* PreprocessWrite()
* HandleWALFull() (previous MaybeFlushColumnFamilies())
* HandleWriteBufferFull()
* WriteToWAL()

Also adding a constructor to WriteThread::Writer, and move WriteContext into db_impl.h.
No real logic change in this patch.
Closes https://github.com/facebook/rocksdb/pull/2042

Differential Revision: D4781014

Pulled By: yiwu-arbug

fbshipit-source-id: d45ca18
2017-04-04 10:24:32 -07:00
Siying Dong
6ef8c620d3 Move auto_roll_logger and filename out of db/
Summary:
It is confusing to have auto_roll_logger to stay under db/, which has nothing to do with database. Move filename together as it is a dependency.
Closes https://github.com/facebook/rocksdb/pull/2080

Differential Revision: D4821141

Pulled By: siying

fbshipit-source-id: ca7d768
2017-04-03 18:39:14 -07:00
Siying Dong
88cc81df5c auto_roll_logger_test to move away from real sleep
Summary:
auto_roll_logger_test relies on timing conditon that some operations finish within 1 seconds. This caused flaky tests. Move away from real timing and sleep and use fake time to verify the time-based rolling.
Closes https://github.com/facebook/rocksdb/pull/2066

Differential Revision: D4810647

Pulled By: siying

fbshipit-source-id: c54d994
2017-04-03 11:39:09 -07:00
Nikhil Benesch
d25e28d584 replace sometimes-undefined uint type with unsigned int
Summary:
`uint` is nonstandard and not a built-in type on all compilers; replace it
with the always-valid `unsigned int`. I assume this went unnoticed because
it's inside an `#ifdef ROCKDB_JEMALLOC`.
Closes https://github.com/facebook/rocksdb/pull/2075

Differential Revision: D4820427

Pulled By: ajkr

fbshipit-source-id: 0876561
2017-04-03 11:39:09 -07:00
Andrew Kryczka
a1d7e487b3 Add L0 write-amp to compaction level stats
Summary:
Previously it always showed 0.0 for L0 write-amp because we were dividing by bytes read from non-output level. For L0, we should instead divide by bytes ingested to the DB. Note the numerator (bytes written to L0) includes flush bytes.
Closes https://github.com/facebook/rocksdb/pull/2078

Differential Revision: D4816902

Pulled By: ajkr

fbshipit-source-id: 7dca31a
2017-04-03 11:24:10 -07:00
Orgad Shaneh
6401a8b76b Fix build with MinGW
Summary:
There still are many warnings (most of them about invalid printf format
for long long), but it builds if FAIL_ON_WARNINGS is disabled.
Closes https://github.com/facebook/rocksdb/pull/2052

Differential Revision: D4807355

Pulled By: siying

fbshipit-source-id: ef03786
2017-03-30 16:54:52 -07:00
Sagar Vemuri
c6d04f2ecf Option to fail a request as incomplete when skipping too many internal keys
Summary:
Operations like Seek/Next/Prev sometimes take too long to complete when there are many internal keys to be skipped. Adding an option, max_skippable_internal_keys -- which could be used to set a threshold for the maximum number of keys that can be skipped, will help to address these cases where it is much better to fail a request (as incomplete) than to wait for a considerable time for the request to complete.

This feature -- to fail an iterator seek request as incomplete, is disabled by default when max_skippable_internal_keys = 0. It is enabled only when max_skippable_internal_keys > 0.

This feature is based on the discussion mentioned in the PR https://github.com/facebook/rocksdb/pull/1084.
Closes https://github.com/facebook/rocksdb/pull/2000

Differential Revision: D4753223

Pulled By: sagar0

fbshipit-source-id: 1c973f7
2017-03-30 12:09:21 -07:00
Siying Dong
67d7623794 Expose the stalling information through DB::GetProperty()
Summary:
Add two DB properties: rocksdb.actual_delayed_write_rate and rocksdb.is_write_stooped, for people to know whether current writes are being throttled.
Closes https://github.com/facebook/rocksdb/pull/2043

Differential Revision: D4782975

Pulled By: siying

fbshipit-source-id: 6b2f5cf
2017-03-29 11:54:20 -07:00
Maysam Yabandeh
e7731d119a Configure index partition size
Summary:
Allow the users to specify the target index partition size.

With this patch an index partition is cut before its estimated in-memory size goes above the configured value for metadata_block_size. The filter partitions are still cut right after an index partition is cut.
Closes https://github.com/facebook/rocksdb/pull/2041

Differential Revision: D4780216

Pulled By: maysamyabandeh

fbshipit-source-id: 95a0831
2017-03-28 12:09:12 -07:00
Siying Dong
91b5feb37b Fix Windows Build broken by a recent commit
Summary: Closes https://github.com/facebook/rocksdb/pull/2032

Differential Revision: D4766260

Pulled By: siying

fbshipit-source-id: 415daa4
2017-03-23 18:09:57 -07:00
Warren Falk
41ccae6d26 Add C API functions (and tests) for WriteBatchWithIndex
Summary:
I've added functions to the C API to support WriteBatchWithIndex as requested in #1833.

I've also added unit tests to c_test

I've implemented the WriteBatchWithIndex variation of every function available for regular WriteBatch.  And added additional functions unique to WriteBatchWithIndex.

For now, the following is omitted:
  1. The ability to create WriteBatchWithIndex's custom batch-only iterator as I'm not sure what its purpose is.  It should be possible to add later if anyone wants it.
  2. The ability to create the batch with a fallback comparator, since it appears to be unnecessary.  I believe the column family comparator will be used for this, meaning those using a custom comparator can just use the column family variations.
Closes https://github.com/facebook/rocksdb/pull/1985

Differential Revision: D4760039

Pulled By: siying

fbshipit-source-id: 393227e
2017-03-23 15:54:13 -07:00
Daniel Black
f4fce4751e Fix clang compile error - [-Werror,-Wunused-lambda-capture]
Summary:
Errors where:

db/version_set.cc:1535:20: error: lambda capture 'this' is not used [-Werror,-Wunused-lambda-capture]
                  [this](const Fsize& f1, const Fsize& f2) -> bool {
                   ^
db/version_set.cc:1541:20: error: lambda capture 'this' is not used [-Werror,-Wunused-lambda-capture]
                  [this](const Fsize& f1, const Fsize& f2) -> bool {
                   ^
db/db_test.cc:2983:27: error: lambda capture 'kNumPutsBeforeWaitForFlush' is not required to be captured for this use [-Werror,-Wunused-lambda-capture]
  auto gen_l0_kb = [this, kNumPutsBeforeWaitForFlush](int size) {
                          ^
Closes https://github.com/facebook/rocksdb/pull/1972

Differential Revision: D4685991

Pulled By: siying

fbshipit-source-id: 9125379
2017-03-22 18:09:10 -07:00
Siying Dong
15950fe3a0 Remove ASSERT_EQ(boolean, ...)
Summary: Closes https://github.com/facebook/rocksdb/pull/2024

Differential Revision: D4755420

Pulled By: siying

fbshipit-source-id: 7332ab1
2017-03-22 15:54:12 -07:00
Aaron Gao
3e56c7e0c4 make total_log_size_ atomic
Summary:
make total_log_size_ atomic to avoid overflow caused by data race.
Closes https://github.com/facebook/rocksdb/pull/2019

Differential Revision: D4751391

Pulled By: siying

fbshipit-source-id: fac01dd
2017-03-22 11:54:40 -07:00
Dmitri Smirnov
be723a8d8c Optionally construct Post Processing Info map in MemTableInserter
Summary:
MemTableInserter default constructs Post processing info
  std::map. However, on Windows with 2015 STL the default
  constructed map still dynamically allocates one node
  which shows up on a profiler and we loose ~40% throughput
  on fillrandom benchmark.
  Solution: declare a map as std::aligned storage and optionally
  construct.

This addresses https://github.com/facebook/rocksdb/issues/1976

Before:
-------------------------------------------------------------------
  Initializing RocksDB Options from command-line flags
  DB path: [k:\data\BulkLoadRandom_10M_fillonly]
  fillrandom   :       2.775 micros/op 360334 ops/sec;  280.4 MB/s
  Microseconds per write:
  Count: 10000000 Average: 2.7749  StdDev: 39.92
  Min: 1  Median: 2.0826  Max: 26051
  Percentiles: P50: 2.08 P75: 2.55 P99: 3.55 P99.9: 9.58 P99.99: 51.5**6
  ------------------------------------------------------

  After:

  Initializing RocksDB Options from command-line flags
  DB path: [k:\data\BulkLoadRandom_10M_fillon
Closes https://github.com/facebook/rocksdb/pull/2011

Differential Revision: D4740823

Pulled By: siying

fbshipit-source-id: 1daaa2c
2017-03-22 11:24:12 -07:00
Maysam Yabandeh
8b0097b49b Readers for partition filter
Summary:
This is the last split of this pull request: https://github.com/facebook/rocksdb/pull/1891 which includes the reader part as well as the tests.
Closes https://github.com/facebook/rocksdb/pull/1961

Differential Revision: D4672216

Pulled By: maysamyabandeh

fbshipit-source-id: 6a2b829
2017-03-22 09:24:15 -07:00
Siying Dong
8f5bf04468 Flush triggered by DB write buffer size picks the oldest unflushed CF
Summary:
Previously, when DB write buffer size triggers, we always pick the CF with most data in its memtable to flush. This approach can minimize total flush happens. Change the behavior to always pick the oldest unflushed CF, which makes it the same behavior when max_total_wal_size hits. This approach will minimize size used by max_total_wal_size.
Closes https://github.com/facebook/rocksdb/pull/1987

Differential Revision: D4703214

Pulled By: siying

fbshipit-source-id: 9ff8b09
2017-03-21 11:09:10 -07:00
Raza Hussain
6908e24b56 dynamic setting of stats_dump_period_sec through SetDBOption()
Summary:
Resolved the following issue: https://github.com/facebook/rocksdb/issues/1930
Closes https://github.com/facebook/rocksdb/pull/2004

Differential Revision: D4736764

Pulled By: yiwu-arbug

fbshipit-source-id: 64fe0b7
2017-03-20 22:54:13 -07:00
Islam AbdelRahman
d52f334cbd Break stalls when no bg work is happening
Summary:
Current stall will keep sleeping even if there is no Flush/Compactions to wait for, I changed the logic to break the stall if we are not flushing or compacting

db_bench command used
```
# fillrandom
# memtable size = 10MB
# value size = 1 MB
# num = 1000
# use /dev/shm
./db_bench --benchmarks="fillrandom,stats" --value_size=1048576 --write_buffer_size=10485760 --num=1000 --delayed_write_rate=XXXXX  --db="/dev/shm/new_stall" | grep "Cumulative stall"
```

```
Current results

# delayed_write_rate = 1000 Kb/sec
Cumulative stall: 00:00:9.031 H:M:S

# delayed_write_rate = 200 Kb/sec
Cumulative stall: 00:00:22.314 H:M:S

# delayed_write_rate = 100 Kb/sec
Cumulative stall: 00:00:42.784 H:M:S

# delayed_write_rate = 50 Kb/sec
Cumulative stall: 00:01:23.785 H:M:S

# delayed_write_rate = 25 Kb/sec
Cumulative stall: 00:02:45.702 H:M:S
```

```
New results

# delayed_write_rate = 1000 Kb/sec
Cumulative stall: 00:00:9.017 H:M:S

# delayed_write_rate = 200 Kb/sec
Cumulative stall: 00
Closes https://github.com/facebook/rocksdb/pull/1884

Differential Revision: D4585439

Pulled By: IslamAbdelRahman

fbshipit-source-id: aed2198
2017-03-16 18:24:17 -07:00
Islam AbdelRahman
995618a821 Support SstFileManager::SetDeleteRateBytesPerSecond()
Summary:
Update DeleteScheduler component to support changing delete rate in runtime by introducing
SstFileManager::SetDeleteRateBytesPerSecond()
Closes https://github.com/facebook/rocksdb/pull/1994

Differential Revision: D4719906

Pulled By: IslamAbdelRahman

fbshipit-source-id: e6b8d9e
2017-03-16 12:09:15 -07:00
Islam AbdelRahman
e19163688b Add macros to include file name and line number during Logging
Summary:
current logging
```
2017/03/14-14:20:30.393432 7fedde9f5700 (Original Log Time 2017/03/14-14:20:30.393414) [default] Level summary: base level 1 max bytes base 268435456 files[1 0 0 0 0 0 0] max score 0.25
2017/03/14-14:20:30.393438 7fedde9f5700 [JOB 2] Try to delete WAL files size 61417909, prev total WAL file size 73820858, number of live WAL files 2.
2017/03/14-14:20:30.393464 7fedde9f5700 [DEBUG] [JOB 2] Delete /dev/shm/old_logging//MANIFEST-000001 type=3 #1 -- OK
2017/03/14-14:20:30.393472 7fedde9f5700 [DEBUG] [JOB 2] Delete /dev/shm/old_logging//000003.log type=0 #3 -- OK
2017/03/14-14:20:31.427103 7fedd49f1700 [default] New memtable created with log file: #9. Immutable memtables: 0.
2017/03/14-14:20:31.427179 7fedde9f5700 [JOB 3] Syncing log #6
2017/03/14-14:20:31.427190 7fedde9f5700 (Original Log Time 2017/03/14-14:20:31.427170) Calling FlushMemTableToOutputFile with column family [default], flush slots available 1, compaction slots allowed 1, compaction slots scheduled 1
2017/03/14-14:20:31.
Closes https://github.com/facebook/rocksdb/pull/1990

Differential Revision: D4708695

Pulled By: IslamAbdelRahman

fbshipit-source-id: cb8968f
2017-03-15 19:39:12 -07:00
Maysam Yabandeh
11526252cc Pinnableslice (2nd attempt)
Summary:
PinnableSlice

    Summary:
    Currently the point lookup values are copied to a string provided by the
    user. This incures an extra memcpy cost. This patch allows doing point lookup
    via a PinnableSlice which pins the source memory location (instead of
    copying their content) and releases them after the content is consumed
    by the user. The old API of Get(string) is translated to the new API
    underneath.

    Here is the summary for improvements:

    value 100 byte: 1.8% regular, 1.2% merge values
    value 1k byte: 11.5% regular, 7.5% merge values
    value 10k byte: 26% regular, 29.9% merge values
    The improvement for merge could be more if we extend this approach to
    pin the merge output and delay the full merge operation until the user
    actually needs it. We have put that for future work.

    PS:
    Sometimes we observe a small decrease in performance when switching from
    t5452014 to this patch but with the old Get(string) API. The d
Closes https://github.com/facebook/rocksdb/pull/1756

Differential Revision: D4391738

Pulled By: maysamyabandeh

fbshipit-source-id: 6f3edd3
2017-03-13 11:54:10 -07:00
Sagar Vemuri
1ffbdfd9a7 Add a new SstFileWriter constructor without explicit comparator
Summary:
The comparator param in SstFileWriter constructor is redundant as it already exists as a field in options. So the current SstFileWriter constructor should be deprecated in favor of a new one which does not take a comparator.
Note that the jni/java apis have not been touched yet.
Closes https://github.com/facebook/rocksdb/pull/1978

Differential Revision: D4685629

Pulled By: sagar0

fbshipit-source-id: 372ce96
2017-03-13 11:39:13 -07:00
Reid Horuff
ebd5639b6d Add ability to search for key prefix in sst_dump tool
Summary:
Add the flag --prefix to the sst_dump tool
This flag is similar to, and exclusive from, the --from flag.

--prefix=0x00FF will return all rows prefixed with 0x00FF.
The --to flag may also be specified and will work as expected.

These changes were used to help in debugging the power cycle corruption issue and theses changes were tested by scanning through a udb.
Closes https://github.com/facebook/rocksdb/pull/1984

Differential Revision: D4691814

Pulled By: reidHoruff

fbshipit-source-id: 027f261
2017-03-13 10:39:12 -07:00
Maysam Yabandeh
e6725e8c8d Fix some bugs in MockEnv
Summary:
Fixing some bugs in MockEnv so it be actually used.
Closes https://github.com/facebook/rocksdb/pull/1914

Differential Revision: D4609923

Pulled By: maysamyabandeh

fbshipit-source-id: ca25735
2017-03-13 09:54:11 -07:00
Andrew Kryczka
f2817fb7f9 avoid ASSERT_EQ(false, ...);
Summary:
lately it fails on travis due to a compiler bug (see https://github.com/google/googletest/issues/322#issuecomment-125645145). interestingly it seems to affect occurrences of `ASSERT_EQ(false, ...);` but not `ASSERT_EQ(true, ...);`.
Closes https://github.com/facebook/rocksdb/pull/1958

Differential Revision: D4680742

Pulled By: ajkr

fbshipit-source-id: 291fe41
2017-03-08 22:24:16 -08:00
Andrew Kryczka
5b11124e39 add max to histogram stats
Summary:
Domas enlightened me about p100 (i.e., max) stats. Let's add them to our histograms.
Closes https://github.com/facebook/rocksdb/pull/1968

Differential Revision: D4678716

Pulled By: ajkr

fbshipit-source-id: 65e7118
2017-03-08 22:24:15 -08:00
Andrew Kryczka
18fc1bc0e0 minor changes for rate limiter test flakiness
Summary:
the 50%+ drained constraint wasn't working consistently in some of our test environments, maybe their resources are too low. relax the constraints a bit.
Closes https://github.com/facebook/rocksdb/pull/1970

Differential Revision: D4679419

Pulled By: ajkr

fbshipit-source-id: 3789cd8
2017-03-08 17:54:11 -08:00
Aaron Gao
12ba00ea65 Reset DBIter::saved_key_ with proper user key anywhere before pass to DBIter::FindNextUserEntry
Summary:
fix db_iter bug introduced by [facebook#1413](https://github.com/facebook/rocksdb/pull/1413)
Closes https://github.com/facebook/rocksdb/pull/1962

Differential Revision: D4672369

Pulled By: lightmark

fbshipit-source-id: 6a22953
2017-03-08 17:24:11 -08:00
Sagar Vemuri
97edc72d39 Add a memtable-only iterator
Summary:
This PR is to support a way to iterate over all the keys that are just in memtables.
Closes https://github.com/facebook/rocksdb/pull/1953

Differential Revision: D4663500

Pulled By: sagar0

fbshipit-source-id: 144e177
2017-03-07 11:54:10 -08:00
Leonidas Galanis
72202962f9 fix db_sst_test flakiness
Summary:
db_sst_test had been flaky occasionally in the following way: reached_max_space_on_compaction can in very rare cases be 0. This happens when the limit on maximum allowable space set using SetMaxAllowedSpaceUsage is hit during flush for all test db sizes (1,2,4,8 and 10MB).The fix clears the error returned when the the space limit is reached during flush. This ensures that the compaction call back will always be called. The runtime is increased slightly because the 1MB loop writes more data and hits the limit during multiple flushes until compaction is scheduled.
Closes https://github.com/facebook/rocksdb/pull/1861

Differential Revision: D4557396

Pulled By: lgalanis

fbshipit-source-id: ff778d1
2017-03-07 11:24:13 -08:00
Reid Horuff
58b12dfe37 Set logs as getting flushed before releasing lock, race condition fix
Summary:
Relating to #1903:

In MaybeFlushColumnFamilies() we want to modify the 'getting_flushed' flag before releasing the db mutex when SwitchMemtable() is called.

The following 2 actions need to be atomic in MaybeFlushColumnFamilies()
- getting_flushed is false on oldest log
- we determine that all CFs can be flushed to successfully release oldest log
- we set getting_flushed = true on the oldest log.
-------
- getting_flushed is false on oldest log
- we determine that all CFs can NOT be flushed to successfully release oldest log
- we set unable_to_flush_oldest_log_ = true on the oldest log.

#### In the 2pc case:

T1 enters function but is unable to flush all CFs to release log
T1 sets unable_to_flush_oldest_log_ = true
T1 begins flushing all CFs possible

T2 enters function but is unable to flush all CFs to release log
T2 sees unable_to_flush_oldes_log_ has been set so exits

T3 enters function and will be able to flush all CFs to release oldest log
T3 sets getting_flushed = true on oldes
Closes https://github.com/facebook/rocksdb/pull/1909

Differential Revision: D4646235

Pulled By: reidHoruff

fbshipit-source-id: c8d0447
2017-03-06 15:09:11 -08:00
Maysam Yabandeh
534581a356 Fix a bug in tests in options operator=
Summary:
Note: Using the default operator= is an unsafe approach for Options since it destructs shared_ptr in
the same order of their creation, in contrast to destructors which
destructs them in the opposite order of creation. One particular problme is
that the cache destructor might invoke callback functions that use Option
members such as statistics. To work around this problem, we manually call
destructor of table_facotry which eventually clears the block cache.
Closes https://github.com/facebook/rocksdb/pull/1950

Differential Revision: D4655473

Pulled By: maysamyabandeh

fbshipit-source-id: 6c4bbff
2017-03-05 18:09:09 -08:00
Andrew Kryczka
4561275c2d fix rate limiter test flakiness
Summary:
fix when elapsed time spans non-integral number of intervals since the rate limiter may still be drained during a partial interval.
Closes https://github.com/facebook/rocksdb/pull/1948

Differential Revision: D4651304

Pulled By: ajkr

fbshipit-source-id: b1f9e70
2017-03-03 11:09:11 -08:00
Andrew Kryczka
7c80a6d7d1 Statistic for how often rate limiter is drained
Summary:
This is the metric I plan to use for adaptive rate limiting. The statistics are updated only if the rate limiter is drained by flush or compaction. I believe (but am not certain) that this is the normal case.

The Statistics object is passed in RateLimiter::Request() to avoid requiring changes to client code, which would've been necessary if we passed it in the RateLimiter constructor.
Closes https://github.com/facebook/rocksdb/pull/1946

Differential Revision: D4646489

Pulled By: ajkr

fbshipit-source-id: d8e0161
2017-03-02 17:54:15 -08:00
Aaron Gao
6fb9013441 sanitize readahead when direct read enabled
Summary:
no readahead:
readseq      :       8.438 micros/op 118510 ops/sec;   13.1 MB/s
sanitize to 10MB:
readseq      :       6.051 micros/op 165248 ops/sec;   18.3 MB/s
Closes https://github.com/facebook/rocksdb/pull/1945

Differential Revision: D4645811

Pulled By: lightmark

fbshipit-source-id: 5d63770
2017-03-02 17:24:11 -08:00
Islam AbdelRahman
f89b3893c0 Remove skip_table_builder_flush and default it to true
Summary:
This option is needed to be enabled for Direct IO
and I cannot think of a reason where we need to disable it

remove it and default it to true
Closes https://github.com/facebook/rocksdb/pull/1944

Differential Revision: D4641088

Pulled By: IslamAbdelRahman

fbshipit-source-id: d7085b9
2017-03-02 16:54:10 -08:00
Siying Dong
d5b607a43f Make db_wal_test slightly faster
Summary:
Avoid to run db_wal_test in all the DB test options, and some small changes.
Closes https://github.com/facebook/rocksdb/pull/1921

Differential Revision: D4622054

Pulled By: siying

fbshipit-source-id: 890fd64
2017-02-28 17:39:10 -08:00
Siying Dong
ba4c77bd6b Divide external_sst_file_test
Summary:
Separate the platform dependent tests from external_sst_file_test. Only those tests need to run on platforms like OSX
Closes https://github.com/facebook/rocksdb/pull/1923

Differential Revision: D4622461

Pulled By: siying

fbshipit-source-id: d2d6f04
2017-02-28 14:24:11 -08:00
Aaron Gao
e877afa08b Remove bulk loading and auto_roll_logger in rocksdb_lite
Summary:
shrink lite size
Closes https://github.com/facebook/rocksdb/pull/1929

Differential Revision: D4622059

Pulled By: siying

fbshipit-source-id: 050b796
2017-02-28 11:09:11 -08:00
Peter (Stig) Edwards
2ca2059f66 Get unique_ptr to use delete[] for char[] in DumpMallocStats
Summary:
Avoid mismatched free() / delete / delete [] in DumpMallocStats
Closes https://github.com/facebook/rocksdb/pull/1927

Differential Revision: D4622045

Pulled By: siying

fbshipit-source-id: 1131b30
2017-02-27 17:39:12 -08:00
Siying Dong
8ad0fcdf99 Separate small subset tests in DBTest
Summary:
Separate a smal subset of tests in DBTest to DBBasicTest. Tests in DBTest don't have to run in CI tests on platforms like OSX, as long as they are covered by Linux.
Closes https://github.com/facebook/rocksdb/pull/1924

Differential Revision: D4616702

Pulled By: siying

fbshipit-source-id: 13e6549
2017-02-27 12:24:11 -08:00
Siying Dong
3b8ba703cb Fix flaky DBTestUniversalCompaction.UniversalCompactionTrivialMoveTest2
Summary:
A previous fix to DBTestUniversalCompaction.UniversalCompactionTrivialMoveTest2 didn't address the right problem. The problem is L0->L0 compaction is not trivial move in the scenario, not parallel compactions. Fix this.
Closes https://github.com/facebook/rocksdb/pull/1911

Differential Revision: D4608955

Pulled By: siying

fbshipit-source-id: 7a712cb
2017-02-23 18:39:13 -08:00
Siying Dong
8efb5ffa2a [rocksdb][PR] Remove option min_partial_merge_operands and verify_checksums_in_comp…
Summary:
…action

 The two options, min_partial_merge_operands and verify_checksums_in_compaction, are not seldom used. Remove them to reduce the total number of options. Also remove them from Java and C interface.
Closes https://github.com/facebook/rocksdb/pull/1902

Differential Revision: D4601219

Pulled By: siying

fbshipit-source-id: aad4cb2
2017-02-23 15:09:12 -08:00
Siying Dong
1ba2804b7f Remove XFunc tests
Summary:
Xfunc is hardly used. Remove it to keep the code simple.
Closes https://github.com/facebook/rocksdb/pull/1905

Differential Revision: D4603220

Pulled By: siying

fbshipit-source-id: 731f96d
2017-02-23 12:09:11 -08:00
Aaron Gao
1ef5f50e84 detect logical sector size
Summary:
querying logical sector size from the device instead of hardcoding it for linux platform.
Closes https://github.com/facebook/rocksdb/pull/1875

Differential Revision: D4591946

Pulled By: ajkr

fbshipit-source-id: 4e9805c
2017-02-23 11:25:36 -08:00
Aaron Gao
0824934423 truncate patch
Summary:
omit the override for the previous commit
Closes https://github.com/facebook/rocksdb/pull/1898

Differential Revision: D4598743

Pulled By: lightmark

fbshipit-source-id: f98a378
2017-02-22 10:39:11 -08:00
Aaron Gao
286a36db7f posix writablefile truncate
Summary:
we occasionally missing this call so the file size will be wrong
Closes https://github.com/facebook/rocksdb/pull/1894

Differential Revision: D4598446

Pulled By: lightmark

fbshipit-source-id: 42b6ef5
2017-02-22 10:09:14 -08:00
Mike Kolupaev
18eeb7b90e Fix interference between max_total_wal_size and db_write_buffer_size checks
Summary:
This is a trivial fix for OOMs we've seen a few days ago in logdevice.

RocksDB get into the following state:
(1) Write throughput is too high for flushes to keep up. Compactions are out of the picture - automatic compactions are disabled, and for manual compactions we don't care that much if they fall behind. We write to many CFs, with only a few L0 sst files in each, so compactions are not needed most of the time.
(2) total_log_size_ is consistently greater than GetMaxTotalWalSize(). It doesn't get smaller since flushes are falling ever further behind.
(3) Total size of memtables is way above db_write_buffer_size and keeps growing. But the write_buffer_manager_->ShouldFlush() is not checked because (2) prevents it (for no good reason, afaict; this is what this commit fixes).
(4) Every call to WriteImpl() hits the MaybeFlushColumnFamilies() path. This keeps flushing the memtables one by one in order of increasing log file number.
(5) No write stalling trigger is hit. We rely on max_write_buffer_number
Closes https://github.com/facebook/rocksdb/pull/1893

Differential Revision: D4593590

Pulled By: yiwu-arbug

fbshipit-source-id: af79c5f
2017-02-21 16:09:10 -08:00
Aaron Gao
2a0f3d0de1 level compaction expansion
Summary:
reimplement the compaction expansion on lower level.

Considering such a case:
input level file: 1[B E] 2[F G] 3[H I] 4 [J M]
output level file: 5[A C] 6[D K] 7[L O]

If we initially pick file 2, now we will compact file 2 and 6. But we can safely compact 2, 3 and 6 without expanding the output level.

The previous code is messy and wrong.

In this diff, I first determine the input range [a, b], and output range [c, d],
then we get the range [e,f] = [min(a, c), max(b, d] and put all eligible clean-cut files within [e, f] into this compaction.

**Note: clean-cut means the files don't have the same user key on the boundaries of some files that are not chosen in this compaction**.
Closes https://github.com/facebook/rocksdb/pull/1760

Differential Revision: D4395564

Pulled By: lightmark

fbshipit-source-id: 2dc2c5c
2017-02-21 10:24:17 -08:00
Yi Wu
381fd32247 Remove timeout_hint_us from WriteOptions
Summary:
The option has been deprecated for two years and has no effect. Removing.
Closes https://github.com/facebook/rocksdb/pull/1866

Differential Revision: D4555203

Pulled By: yiwu-arbug

fbshipit-source-id: c48f627
2017-02-17 15:24:17 -08:00
Islam AbdelRahman
fce7a6e196 Fail IngestExternalFile when bg_error_ exists
Summary:
Fail IngestExternalFile() when bg_error_ exists
Closes https://github.com/facebook/rocksdb/pull/1881

Differential Revision: D4580621

Pulled By: IslamAbdelRahman

fbshipit-source-id: 1194913
2017-02-17 13:39:17 -08:00
Shu Zhang
756c5924e6 Allow adding external v1 sst file with no global seqno support
Summary:
This is a follow up fix for https://github.com/facebook/rocksdb/pull/1783. After it, we should be able to ingest external v1 sst files with no global seqno field.
Closes https://github.com/facebook/rocksdb/pull/1874

Differential Revision: D4576194

Pulled By: IslamAbdelRahman

fbshipit-source-id: 5b34a3e
2017-02-16 17:09:12 -08:00
Aaron Gao
db2b4eb50e avoid direct io in rocksdb_lite
Summary:
fix lite bugs
disable direct io in lite mode
Closes https://github.com/facebook/rocksdb/pull/1870

Differential Revision: D4559866

Pulled By: yiwu-arbug

fbshipit-source-id: 3761c51
2017-02-16 10:39:13 -08:00
Andrew Kryczka
43e9f01c20 Fix repair_test on ROCKSDB_LITE
Summary:
RepairDB isn't included in rocksdb lite, so don't test it.
Closes https://github.com/facebook/rocksdb/pull/1873

Differential Revision: D4565094

Pulled By: ajkr

fbshipit-source-id: 8cc0898
2017-02-15 11:24:12 -08:00
Xiaofei Du
7106a994fe Use monotonic time points in write_controller.cc and rate_limiter.cc
Summary:
NowMicros() provides non-monotonic time. When wall clock is
synchronized or changed, the non-monotonicity time points will affect write rate
controllers. This patch changes write_controller.cc and rate_limiter.cc to use
monotonic time points.
Closes https://github.com/facebook/rocksdb/pull/1865

Differential Revision: D4561732

Pulled By: siying

fbshipit-source-id: 95ece62
2017-02-14 18:24:24 -08:00
Yi Wu
c2247dc1c7 Make DBImpl::has_unpersisted_data_ atomic
Summary:
Seems to me `has_unpersisted_data_` is read from read thread and write
from write thread concurrently without synchronization. Making it an
atomic.

I update the logic not because seeing any problem with it, but it just
feel confusing.
Closes https://github.com/facebook/rocksdb/pull/1869

Differential Revision: D4555837

Pulled By: yiwu-arbug

fbshipit-source-id: eff2ab8
2017-02-13 18:54:13 -08:00
Sagar Vemuri
eb912a927e Remove disableDataSync option
Summary:
Remove disableDataSync, and another similarly named disable_data_sync options.
This is being done to simplify options, and also because the performance gains of this feature can be achieved by other methods.
Closes https://github.com/facebook/rocksdb/pull/1859

Differential Revision: D4541292

Pulled By: sagar0

fbshipit-source-id: 5b3a6ca
2017-02-13 11:09:13 -08:00
Dmitri Smirnov
a5adda0642 Fix repair issues
Summary:
Record the first parsed sequence number as the minimum
  so we can find the true minimum otherwise everything is larger than zero.
  Fix the comparator name comparision.
Closes https://github.com/facebook/rocksdb/pull/1858

Differential Revision: D4544365

Pulled By: ajkr

fbshipit-source-id: 439cbc2
2017-02-10 10:54:12 -08:00
Andrew Kryczka
b48e4778be Consolidate file cutting logic in compaction loop
Summary:
It was really annoying to have two places (top and bottom of compaction loop) where we cut output files. I had bugs in both DeleteRange and dictionary compression due to updating only one of the two. This diff consolidates the file-cutting logic to the bottom of the compaction loop.

Keep in mind that my goal with input_status is to be consistent with the past behavior, even though I'm not sure it's ideal.
Closes https://github.com/facebook/rocksdb/pull/1832

Differential Revision: D4503038

Pulled By: ajkr

fbshipit-source-id: 7da5213
2017-02-08 16:24:17 -08:00
Maysam Yabandeh
c4a37dcb44 Print the missed last layer in cfstats
Summary:
Printing compaction stats used to operate on two variable:
number_levels_: for printing the layer
num_levels_to_check: for updating the compaction score

After this commit: 361010d447 these two are mixed up and as a result the last layer might not be printed out: https://fb.facebook.com/groups/rocksdb.internal/permalink/1315716625143616/

number_levels_ was used to decide which layers to print: 672300f47f/db/internal_stats.cc (L753) but after the patch it is based on the return value of DumpCFMapStats 361010d447/db/internal_stats.cc (L929) which returns num_levels_to_check: 361010d447/db/internal_stats.cc (L917)
Closes https://github.com/facebook/rocksdb/pull/1853

Differential Revision: D4529280

Pulled By: maysamyabandeh

fbshipit-source-id: 3fd9448
2017-02-08 10:39:15 -08:00
Maysam Yabandeh
69d5262c81 Two-level Indexes
Summary:
Partition Index blocks and use a Partition-index as a 2nd level index.

The two-level index can be used by setting
BlockBasedTableOptions::kTwoLevelIndexSearch as the index type and
configuring BlockBasedTableOptions::index_per_partition

t15539501
Closes https://github.com/facebook/rocksdb/pull/1814

Differential Revision: D4473535

Pulled By: maysamyabandeh

fbshipit-source-id: bffb87e
2017-02-06 16:39:12 -08:00
Dmitri Smirnov
0a4cdde50a Windows thread
Summary:
introduce new methods into a public threadpool interface,
- allow submission of std::functions as they allow greater flexibility.
- add Joining methods to the implementation to join scheduled and submitted jobs with
  an option to cancel jobs that did not start executing.
- Remove ugly `#ifdefs` between pthread and std implementation, make it uniform.
- introduce pimpl for a drop in replacement of the implementation
- Introduce rocksdb::port::Thread typedef which is a replacement for std::thread.  On Posix Thread defaults as before std::thread.
- Implement WindowsThread that allocates memory in a more controllable manner than windows std::thread with a replaceable implementation.
- should be no functionality changes.
Closes https://github.com/facebook/rocksdb/pull/1823

Differential Revision: D4492902

Pulled By: siying

fbshipit-source-id: c74cb11
2017-02-06 14:54:18 -08:00
Vitaliy Liptchinsky
1aaa898cf1 Adding GetApproximateMemTableStats method
Summary:
Added method that returns approx num of entries as well as size for memtables.
Closes https://github.com/facebook/rocksdb/pull/1841

Differential Revision: D4511990

Pulled By: VitaliyLi

fbshipit-source-id: 9a4576e
2017-02-06 14:54:16 -08:00
Siying Dong
036d668b19 Fix wrong result in data race case related to Get()
Summary:
In theory, Get() can get a wrong result, if it races in a special with with flush. The bug can be reproduced in DBTest2.GetRaceFlush. Fix this bug by getting snapshot after referencing the super version.
Closes https://github.com/facebook/rocksdb/pull/1816

Differential Revision: D4475958

Pulled By: siying

fbshipit-source-id: bd9e67a
2017-02-03 11:39:15 -08:00
Islam AbdelRahman
574b543f80 Rename merger.h -> merging_iterator.h
Summary:
merger.h was always a confusing name for me, simply give the file a better name
Closes https://github.com/facebook/rocksdb/pull/1836

Differential Revision: D4505357

Pulled By: IslamAbdelRahman

fbshipit-source-id: 07b28d8
2017-02-02 16:54:19 -08:00
oranagra
b96372dead improving the C wrapper
Summary:
- rocksdb_property_int (so that we don't have to parse strings)
- and rocksdb_set_options (to allow controlling options via strings)
- a few other missing options exposed
- a documentation comment fix
Closes https://github.com/facebook/rocksdb/pull/1793

Differential Revision: D4456569

Pulled By: yiwu-arbug

fbshipit-source-id: 9f1fac1
2017-01-27 17:39:16 -08:00
Siying Dong
04c4ec41d1 Change corruption_test to use 4 bits.
Summary:
In the patch which LRU cache was made use dynamic shard bits, I changed to 2 shard bits to make the test happy. Look like it is occasionally still unhappy. Change it to 4 shard bits.
Closes https://github.com/facebook/rocksdb/pull/1815

Differential Revision: D4475849

Pulled By: siying

fbshipit-source-id: 575ff00
2017-01-27 11:24:16 -08:00
Siying Dong
2d75cd40d3 NewLRUCache() to pick number of shard bits based on capacity if not given
Summary:
If the users use the NewLRUCache() without passing in the number of shard bits, instead of using hard-coded 6, we'll determine it based on capacity.
Closes https://github.com/facebook/rocksdb/pull/1584

Differential Revision: D4242517

Pulled By: siying

fbshipit-source-id: 86b0f18
2017-01-27 06:39:12 -08:00
Siying Dong
f25f1ec60b Add test DBTest2.GetRaceFlush which can expose a data race bug
Summary:
A current data race issue in Get() and Flush() can cause a Get() to return wrong results when a flush happened in the middle. Disable the test for now.
Closes https://github.com/facebook/rocksdb/pull/1813

Differential Revision: D4472310

Pulled By: siying

fbshipit-source-id: 5755ebd
2017-01-26 16:39:14 -08:00
sdong
5dad9d6d28 Avoid logs_ operation out of DB mutex
Summary:
logs_.back() is called out of DB mutex, which can cause data race. We move the access into the DB mutex protection area.
Closes https://github.com/facebook/rocksdb/pull/1774

Reviewed By: AsyncDBConnMarkedDownDBException

Differential Revision: D4417472

Pulled By: AsyncDBConnMarkedDownDBException

fbshipit-source-id: 2da1f1e
2017-01-25 15:54:13 -08:00
Islam AbdelRahman
a7b13919bf Fix CompactFiles() bug when used with CompactionFilter using SuperVersion
Summary:
GetAndRefSuperVersion() should not be called again in the same thread before ReturnAndCleanupSuperVersion() is called.

If we have a compaction filter that is using DB::Get, This will happen
```
CompactFiles() {
  GetAndRefSuperVersion() // -- first call
    ..
    CompactionFilter() {
      GetAndRefSuperVersion() // -- second call
      ReturnAndCleanupSuperVersion()
    }
    ..
  ReturnAndCleanupSuperVersion()
}
```

We solve this issue in the same way Iterator is solving it, but using GetReferencedSuperVersion()

This was discovered in https://github.com/facebook/mysql-5.6/issues/427 by alxyang
Closes https://github.com/facebook/rocksdb/pull/1803

Differential Revision: D4460155

Pulled By: IslamAbdelRahman

fbshipit-source-id: 5e54322
2017-01-25 14:09:13 -08:00
Andrew Kryczka
616a1464ea Fix DeleteRange including sentinels in output files
Summary:
when writing RangeDelAggregator::AddToBuilder, I forgot that there are sentinel tombstones in the middle of the interval map since gaps between real tombstones are represented with sentinels.

blame: #1614
Closes https://github.com/facebook/rocksdb/pull/1804

Differential Revision: D4460426

Pulled By: ajkr

fbshipit-source-id: 69444b5
2017-01-25 11:09:12 -08:00
Islam AbdelRahman
03ca2ac8a9 Remove function from DBImpl that are not used anywhere
Summary:
GetAndRefSuperVersionUnlocked
ReturnAndCleanupSuperVersionUnlocked
GetColumnFamilyHandleUnlocked

Are dead code that are not used any where
Closes https://github.com/facebook/rocksdb/pull/1802

Differential Revision: D4459948

Pulled By: IslamAbdelRahman

fbshipit-source-id: 30fa89d
2017-01-24 19:24:13 -08:00
Andrew Kryczka
b0029bc7fa Test merge op covered by range deletion in memtable
Summary:
It's a test case for #1797. Also got rid of kTypeDeletion in the conditional since we treat it the same as kTypeRangeDeletion.
Closes https://github.com/facebook/rocksdb/pull/1800

Differential Revision: D4451300

Pulled By: ajkr

fbshipit-source-id: b39dda1
2017-01-24 13:39:11 -08:00
Andrew Kryczka
d438e1ec17 Test range deletion block outlives table reader
Summary:
This test ensures RangeDelAggregator can still access blocks even if it outlives the table readers that created them (detailed description in comments).

I plan to optimize away the extra cache lookup we currently do in BlockBasedTable::NewRangeTombstoneIterator(), as it is ~5% CPU in my random read benchmark in a database with 1k tombstones. This test will help make sure nothing breaks in the process.
Closes https://github.com/facebook/rocksdb/pull/1739

Differential Revision: D4375954

Pulled By: ajkr

fbshipit-source-id: aef9357
2017-01-24 13:24:14 -08:00
Andrew Kryczka
9da4d542fe Range deletions unsupported in tailing iterator
Summary:
change the iterator status to NotSupported as soon as a range tombstone
is encountered by a ForwardIterator.
Closes https://github.com/facebook/rocksdb/pull/1593

Differential Revision: D4246294

Pulled By: ajkr

fbshipit-source-id: aef9f49
2017-01-23 13:39:12 -08:00
Hyeonseok Oh
f2b4939da4 fixed typo
Summary:
I fixed exisit -> exist
Closes https://github.com/facebook/rocksdb/pull/1799

Differential Revision: D4451466

Pulled By: yiwu-arbug

fbshipit-source-id: b447c3a
2017-01-23 12:54:13 -08:00
yinqiwen
973f1b78fd memtable: delete merge value for range deleteion
Summary: Closes https://github.com/facebook/rocksdb/pull/1797

Differential Revision: D4448004

Pulled By: ajkr

fbshipit-source-id: 3ffc27c
2017-01-23 12:24:14 -08:00
Vitaliy Liptchinsky
753ff84a3d Fix get approx size
Summary:
Fixing GetApproximateSize bug for the case of computing stats for mem tables only.
Closes https://github.com/facebook/rocksdb/pull/1795

Differential Revision: D4445507

Pulled By: IslamAbdelRahman

fbshipit-source-id: 3905846
2017-01-20 15:54:12 -08:00
Jay Lee
537da370da c: allow set savepoint to writebatch
Summary:
Allow set SavePoint to WriteBatch in C ABI.
Closes https://github.com/facebook/rocksdb/pull/1698

Differential Revision: D4378556

Pulled By: yiwu-arbug

fbshipit-source-id: afca746
2017-01-20 13:24:13 -08:00
Changli Gao
5ac97314e7 Fix std::out_of_range when DBOptions::keep_log_file_num is zero
Summary:
We should validate this option, otherwise we may see
std::out_of_range thrown at: db/db_impl.cc:1124

1123     for (unsigned int i = 0; i <= end; i++) {
1124       std::string& to_delete = old_info_log_files.at(i);
1125       std::string full_path_to_delete =
1126           (immutable_db_options_.db_log_dir.empty()
Closes https://github.com/facebook/rocksdb/pull/1722

Differential Revision: D4379495

Pulled By: yiwu-arbug

fbshipit-source-id: e136552
2017-01-20 13:24:12 -08:00
Shu Zhang
3c0852d1da Make ingest external file backward compatible
Summary: Closes https://github.com/facebook/rocksdb/pull/1783

Differential Revision: D4443463

Pulled By: IslamAbdelRahman

fbshipit-source-id: 39d21d6
2017-01-20 12:09:19 -08:00
Siying Dong
0e8dfd6062 Fix OptimizeForPointLookup()
Summary:
If users directly call OptimizeForPointLookup(), it is broken as the option isn't compatible with parallel memtable insert. Fix it by using memtable bloomo filter instead.
Closes https://github.com/facebook/rocksdb/pull/1791

Differential Revision: D4442836

Pulled By: siying

fbshipit-source-id: bf6c9cd
2017-01-20 10:54:12 -08:00
Vitaliy Liptchinsky
e840213d6e Change DB::GetApproximateSizes for more flexibility needed for MyRocks
Summary:
Added an option to GetApproximateSizes to exclude file stats, as MyRocks has those counted exactly and we need only stats from memtables.
Closes https://github.com/facebook/rocksdb/pull/1787

Differential Revision: D4441111

Pulled By: IslamAbdelRahman

fbshipit-source-id: c11f4c3
2017-01-20 09:39:11 -08:00
Yi Wu
9239103cd4 Flush job should release reference current version if sync log failed
Summary:
Fix the bug when sync log fail, FlushJob::Run() will not be execute and
reference to cfd->current() will not be release.
Closes https://github.com/facebook/rocksdb/pull/1792

Differential Revision: D4441316

Pulled By: yiwu-arbug

fbshipit-source-id: 5523e28
2017-01-19 23:09:15 -08:00
Islam AbdelRahman
da54d36a96 Disable IngestExternalFile in ReadOnly mode
Summary:
Disable IngestExternalFile() in read only mode
Closes https://github.com/facebook/rocksdb/pull/1781

Differential Revision: D4439179

Pulled By: IslamAbdelRahman

fbshipit-source-id: b7e46e7
2017-01-19 15:54:19 -08:00
Reid Horuff
5cf176ca15 Fix for 2PC causing WAL to grow too large
Summary:
Consider the following single column family scenario:
prepare in log A
commit in log B
*WAL is too large, flush all CFs to releast log A*
*CFA is on log B so we do not see CFA is depending on log A so no flush is requested*

To fix this we must also consider the log containing the prepare section when determining what log a CF is dependent on.
Closes https://github.com/facebook/rocksdb/pull/1768

Differential Revision: D4403265

Pulled By: reidHoruff

fbshipit-source-id: ce800ff
2017-01-19 15:39:12 -08:00
Andrew Kryczka
f9d18e22d2 Fix DeleteRange file boundary correctness issue with max_compaction_bytes
Summary:
Cockroachdb exposed this bug in #1778. The bug happens when a compaction's output files are ended due to exceeding max_compaction_bytes. In that case we weren't taking into account the next file's start key when deciding how far to extend the current file's max_key. This caused the non-overlapping key-range invariant to be violated.

Note this was correctly handled for the usual case of cutting compaction output, which is file size exceeding max_output_file_size. I am not sure why these are two separate code paths, but we can consider refactoring it to prevent such errors in the future.
Closes https://github.com/facebook/rocksdb/pull/1784

Differential Revision: D4430235

Pulled By: ajkr

fbshipit-source-id: 80af748
2017-01-18 11:54:22 -08:00
Islam AbdelRahman
3ce091fd73 Add KEEP_DB env var option
Summary:
When debugging tests, it's useful to preserve the DB to investigate it and check the logs
This will allow us to set KEEP_DB=1 to preserve the DB
Closes https://github.com/facebook/rocksdb/pull/1759

Differential Revision: D4393826

Pulled By: IslamAbdelRahman

fbshipit-source-id: 1bff689
2017-01-17 13:54:20 -08:00
Siying Dong
77b4806625 Fix 2PC with concurrent memtable insert
Summary:
If concurrent memtable insert is enabled, and one prepare command and a normal command are grouped into a commit group, the sequence ID will be calculated incorrectly.
Closes https://github.com/facebook/rocksdb/pull/1730

Differential Revision: D4371081

Pulled By: siying

fbshipit-source-id: cd40c6d
2017-01-17 11:24:28 -08:00
Mike Kolupaev
d18dd2c41f Abort compactions more reliably when closing DB
Summary:
DB shutdown aborts running compactions by setting an atomic shutting_down=true that CompactionJob periodically checks. Without this PR it checks it before processing every _output_ value. If compaction filter filters everything out, the compaction is uninterruptible. This PR adds checks for shutting_down on every _input_ value (in CompactionIterator and MergeHelper).

There's also some minor code cleanup along the way.
Closes https://github.com/facebook/rocksdb/pull/1639

Differential Revision: D4306571

Pulled By: yiwu-arbug

fbshipit-source-id: f050890
2017-01-11 15:09:21 -08:00
Changli Gao
9f246298e2 Performance: Iterate vector by reference
Summary: Closes https://github.com/facebook/rocksdb/pull/1763

Differential Revision: D4398796

Pulled By: yiwu-arbug

fbshipit-source-id: b82636d
2017-01-11 10:54:37 -08:00
Dmitri Smirnov
3c233ca4ea Fix Windows environment issues
Summary:
Enable directIO on WritableFileImpl::Append
     with offset being current length of the file.
     Enable UniqueID tests on Windows, disable others but
     leeting them to compile. Unique tests are valuable to
     detect failures on different filesystems and upcoming
     ReFS.
     Clear output in WinEnv Getchildren.This is different from
     previous strategy, do not touch output on failure.
     Make sure DBTest.OpenWhenOpen works with windows error message
Closes https://github.com/facebook/rocksdb/pull/1746

Differential Revision: D4385681

Pulled By: IslamAbdelRahman

fbshipit-source-id: c07b702
2017-01-09 15:54:12 -08:00
Maysam Yabandeh
d0ba8ec8f9 Revert "PinnableSlice"
Summary:
This reverts commit 54d94e9c2c.

The pull request was landed by mistake.
Closes https://github.com/facebook/rocksdb/pull/1755

Differential Revision: D4391678

Pulled By: maysamyabandeh

fbshipit-source-id: 36d5149
2017-01-08 14:24:12 -08:00
Maysam Yabandeh
54d94e9c2c PinnableSlice
Summary:
Currently the point lookup values are copied to a string provided by the user.
This incures an extra memcpy cost. This patch allows doing point lookup
via a PinnableSlice which pins the source memory location (instead of
copying their content) and releases them after the content is consumed
by the user. The old API of Get(string) is translated to the new API
underneath.

 Here is the summary for improvements:
 1. value 100 byte: 1.8%  regular, 1.2% merge values
 2. value 1k   byte: 11.5% regular, 7.5% merge values
 3. value 10k byte: 26% regular,    29.9% merge values

 The improvement for merge could be more if we extend this approach to
 pin the merge output and delay the full merge operation until the user
 actually needs it. We have put that for future work.

PS:
Sometimes we observe a small decrease in performance when switching from
t5452014 to this patch but with the old Get(string) API. The difference
is a little and could be noise. More importantly it is safely
cancelled
Closes https://github.com/facebook/rocksdb/pull/1732

Differential Revision: D4374613

Pulled By: maysamyabandeh

fbshipit-source-id: a077f1a
2017-01-08 13:54:13 -08:00
Andrew Kryczka
b104b87814 Maintain position in range deletions map
Summary:
When deletion-collapsing mode is enabled (i.e., for DBIter/CompactionIterator), we maintain position in the tombstone maps across calls to ShouldDelete(). Since iterators often access keys sequentially (or reverse-sequentially), scanning forward/backward from the last position can be faster than binary-searching the map for every key.

- When Next() is invoked on an iterator, we use kForwardTraversal to scan forwards, if needed, until arriving at the range deletion containing the next key.
- Similarly for Prev(), we use kBackwardTraversal to scan backwards in the range deletion map.
- When the iterator seeks, we use kBinarySearch for repositioning
- After tombstones are added or before the first ShouldDelete() invocation, the current position is set to invalid, which forces kBinarySearch to be used.
- Non-iterator users (i.e., Get()) use kFullScan, which has the same behavior as before---scan the whole map for every key passed to ShouldDelete().
Closes https://github.com/facebook/rocksdb/pull/1701

Differential Revision: D4350318

Pulled By: ajkr

fbshipit-source-id: 5129b76
2017-01-05 10:39:12 -08:00
siddontang
653ac1f9c6 C API: support total_order_mode
Summary: Closes https://github.com/facebook/rocksdb/pull/1687

Differential Revision: D4349210

Pulled By: IslamAbdelRahman

fbshipit-source-id: 32d0fbd
2017-01-03 18:39:14 -08:00
Adam Retter
85ac1a320a Fix rocksdb::Status::getState
Summary:
This fixes the Java API for Status#getState use in Native code and also simplifies the implementation of rocksdb::Status::getState.
Closes https://github.com/facebook/rocksdb/issues/1688
Closes https://github.com/facebook/rocksdb/pull/1714

Differential Revision: D4364181

Pulled By: yiwu-arbug

fbshipit-source-id: 8e073b4
2017-01-03 18:39:14 -08:00
Islam AbdelRahman
76711b6e77 Make ExternalSSTFileTest::CompactionDeadlock more deterministic
Summary:
It's not always true that `ASSERT_EQ(running_threads.load(), 2);`
Closes https://github.com/facebook/rocksdb/pull/1736

Differential Revision: D4374091

Pulled By: IslamAbdelRahman

fbshipit-source-id: 4f70bbd
2017-01-03 18:09:20 -08:00
Islam AbdelRahman
c963460dbc Fix tests under GCC_481
Summary:
This fix the issue with tests failing under GCC 481, I am not sure what is the exact reason
Closes https://github.com/facebook/rocksdb/pull/1735

Differential Revision: D4374094

Pulled By: IslamAbdelRahman

fbshipit-source-id: b3625bc
2017-01-03 17:54:12 -08:00
Vincent Lee
e425ec1162 utilities/backupable: backup should limit the copy size of wal.
Summary:
Since the backup work as snapshot, we should only copy
 the bytes of the wal while we get the alive files.
Closes https://github.com/facebook/rocksdb/pull/1733

Differential Revision: D4373457

Pulled By: ajkr

fbshipit-source-id: 389318f
2016-12-31 10:54:20 -08:00
Maysam Yabandeh
0712d541d1 Delegate Cleanables
Summary:
Cleanable objects will perform the registered cleanups when
they are destructed. We however rather to delay this cleaning like when
we are gathering the merge operands. Current approach is to create the
Cleanable object on heap (instead of on stack) and delay deleting it.

By allowing Cleanables to delegate their cleanups to another cleanable
object we can delay the cleaning without however the need to craete the
cleanable object on heap and keeping it around. This patch applies this
technique for the cleanups of BlockIter and shows improved performance
for some in-memory benchmarks:
+1.8% for merge worklaod, +6.4% for non-merge workload when the merge
operator is specified.
https://our.intern.facebook.com/intern/tasks?t=15168163

Non-merge benchmark:
TEST_TMPDIR=/dev/shm/v100nocomp/ ./db_bench --benchmarks=fillrandom
--num=1000000 -value_size=100 -compression_type=none

Reading random with no merge operator specified:
TEST_TMPDIR=/dev/shm/v100nocomp/ ./db_bench
--benchmarks="read
Closes https://github.com/facebook/rocksdb/pull/1711

Differential Revision: D4361163

Pulled By: maysamyabandeh

fbshipit-source-id: 9801e07
2016-12-29 15:54:19 -08:00
Islam AbdelRahman
d58ef52ba6 Allow SstFileWriter to Fadvise the file away from page cache
Summary:
Add `fadvise_trigger` option to `SstFileWriter`

If fadvise_trigger is passed with a non-zero value, SstFileWriter will invalidate the os page cache every `fadvise_trigger` bytes for the sst file
Closes https://github.com/facebook/rocksdb/pull/1731

Differential Revision: D4371246

Pulled By: IslamAbdelRahman

fbshipit-source-id: 91caff1
2016-12-29 15:09:19 -08:00
Siying Dong
17a4b75cc3 Always fsync the file after file copying
Summary:
File copying happens when creating checkpoints and bulkloading files from different FS partition. We should fsync the files when copying them to guarantee durability. A side effect will be that the dirty pages in file system buffers won't grow too large.
Closes https://github.com/facebook/rocksdb/pull/1728

Differential Revision: D4371083

Pulled By: siying

fbshipit-source-id: 579e14c
2016-12-28 19:09:16 -08:00
leipeng
a738af8f84 db/pinned_iterators_manager.h: bugfix
Summary:
std::unique(beg, end) returns an iterator of unique_end, data behind unique_end should not be accessed.
Closes https://github.com/facebook/rocksdb/pull/1726

Differential Revision: D4371076

Pulled By: IslamAbdelRahman

fbshipit-source-id: 5564450
2016-12-28 18:54:57 -08:00
Siying Dong
438f22bc56 Fix bug of Checkpoint loses recent transactions with 2PC
Summary:
If 2PC is enabled, checkpoint may not copy previous log files that contain uncommitted prepare records. In this diff we keep those files.
Closes https://github.com/facebook/rocksdb/pull/1724

Differential Revision: D4368319

Pulled By: siying

fbshipit-source-id: cc2c746
2016-12-28 12:24:16 -08:00
Aaron Gao
972f96b3fb direct io write support
Summary:
rocksdb direct io support

```
[gzh@dev11575.prn2 ~/rocksdb] ./db_bench -benchmarks=fillseq --num=1000000
Initializing RocksDB Options from the specified file
Initializing RocksDB Options from command-line flags
RocksDB:    version 5.0
Date:       Wed Nov 23 13:17:43 2016
CPU:        40 * Intel(R) Xeon(R) CPU E5-2660 v2 @ 2.20GHz
CPUCache:   25600 KB
Keys:       16 bytes each
Values:     100 bytes each (50 bytes after compression)
Entries:    1000000
Prefix:    0 bytes
Keys per prefix:    0
RawSize:    110.6 MB (estimated)
FileSize:   62.9 MB (estimated)
Write rate: 0 bytes/second
Compression: Snappy
Memtablerep: skip_list
Perf Level: 1
WARNING: Assertions are enabled; benchmarks unnecessarily slow
------------------------------------------------
Initializing RocksDB Options from the specified file
Initializing RocksDB Options from command-line flags
DB path: [/tmp/rocksdbtest-112628/dbbench]
fillseq      :       4.393 micros/op 227639 ops/sec;   25.2 MB/s

[gzh@dev11575.prn2 ~/roc
Closes https://github.com/facebook/rocksdb/pull/1564

Differential Revision: D4241093

Pulled By: lightmark

fbshipit-source-id: 98c29e3
2016-12-22 13:09:19 -08:00
Islam AbdelRahman
989e644ed8 Remove sst_file_manager option from LITE
Summary:
Remove sst_file_manager option from LITE
Closes https://github.com/facebook/rocksdb/pull/1690

Differential Revision: D4341331

Pulled By: IslamAbdelRahman

fbshipit-source-id: 9f9328d
2016-12-21 17:54:21 -08:00
Islam AbdelRahman
1beef6569a Fix c_test
Summary:
addfile phase in c_test could fail because in previous steps we did a DeleteRange.
Fix the test by simply moving the addfile phase before DeleteRange
Closes https://github.com/facebook/rocksdb/pull/1672

Differential Revision: D4328896

Pulled By: IslamAbdelRahman

fbshipit-source-id: 1d946df
2016-12-21 17:39:14 -08:00
Andrew Kryczka
50e305de98 Collapse range deletions
Summary:
Added a tombstone-collapsing mode to RangeDelAggregator, which eliminates overlap in the TombstoneMap. In this mode, we can check whether a tombstone covers a user key using upper_bound() (i.e., binary search). However, the tradeoff is the overhead to add tombstones is now higher, so at first I've only enabled it for range scans (compaction/flush/user iterators), where we expect a high number of calls to ShouldDelete() for the same tombstones. Point queries like Get() will still use the linear scan approach.

Also in this diff I changed RangeDelAggregator's TombstoneMap to use multimap with user keys instead of map with internal keys. Callers sometimes provided ParsedInternalKey directly, from which it would've required string copying to derive an internal key Slice with which we could search the map.
Closes https://github.com/facebook/rocksdb/pull/1614

Differential Revision: D4270397

Pulled By: ajkr

fbshipit-source-id: 93092c7
2016-12-19 16:54:12 -08:00
Yi Wu
5d1457dbbf Dump persistent cache options
Summary:
Dump persistent cache options
Closes https://github.com/facebook/rocksdb/pull/1679

Differential Revision: D4337019

Pulled By: yiwu-arbug

fbshipit-source-id: 3812f8a
2016-12-19 14:09:12 -08:00
Daniel Black
342370f1d3 Simplify MemTable::Update
Summary:
As suggested by testn in #1650

The Add is at the end of the function. Having a fallthough
will result in it being added twice.
Closes https://github.com/facebook/rocksdb/pull/1676

Differential Revision: D4331906

Pulled By: yiwu-arbug

fbshipit-source-id: 895c4a0
2016-12-17 00:09:13 -08:00
Ding Ma
1a136c1f13 Expose file size
Summary:
add a new function to SstFileWriter that will tell the user how big is there file right now.
Closes https://github.com/facebook/rocksdb/pull/1686

Differential Revision: D4338868

Pulled By: mdyuki1016

fbshipit-source-id: c1ee16a
2016-12-16 18:39:12 -08:00
Andrew Kryczka
fbff4628a9 Reduce compaction iterator status checks
Summary:
seems it's expensive to check status since the underlying merge iterator checks status of all its children. so only do it when it's really necessary to get the status before invoking Next(), i.e., when we're advancing to get the first key in the next file.
Closes https://github.com/facebook/rocksdb/pull/1691

Differential Revision: D4343446

Pulled By: siying

fbshipit-source-id: 70ab315
2016-12-16 17:39:09 -08:00
Daniel Black
816c1e30ca gcc-7 requires include <functional> for std::function
Summary:
Fixes compile error:

In file included from ./util/statistics.h:17:0,
                 from ./util/stop_watch.h:8,
                 from ./util/perf_step_timer.h:9,
                 from ./util/iostats_context_imp.h:8,
                 from ./util/posix_logger.h:27,
                 from ./port/util_logger.h:18,
                 from ./db/auto_roll_logger.h:15,
                 from db/auto_roll_logger.cc:6:
./util/thread_local.h:65:16: error: 'function' in namespace 'std' does not name a template type
   typedef std::function<void(void*, void*)> FoldFunc;
Closes https://github.com/facebook/rocksdb/pull/1656

Differential Revision: D4318702

Pulled By: yiwu-arbug

fbshipit-source-id: 8c5d17a
2016-12-16 11:24:18 -08:00
Yi Wu
c270735861 Iterator should be in corrupted status if merge operator return false
Summary:
Iterator should be in corrupted status if merge operator return false.
Also add test to make sure if max_successive_merges is hit during write,
data will not be lost.
Closes https://github.com/facebook/rocksdb/pull/1665

Differential Revision: D4322695

Pulled By: yiwu-arbug

fbshipit-source-id: b327b05
2016-12-16 11:09:16 -08:00
siddontang
8f5d24ae68 C API: support get usage and pinned_usage for cache
Summary: Closes https://github.com/facebook/rocksdb/pull/1671

Differential Revision: D4327453

Pulled By: yiwu-arbug

fbshipit-source-id: bcdbc65
2016-12-15 17:24:17 -08:00
Daniel Black
cfc34d7c4e Missing break in case in DBTestBase::CurrentOptions
Summary:
Found by gcc-7 compile error.

This appeared to be a fault as these options seems too different.
Closes https://github.com/facebook/rocksdb/pull/1667

Differential Revision: D4324174

Pulled By: yiwu-arbug

fbshipit-source-id: 0f65383
2016-12-13 18:39:14 -08:00
Daniel Black
bfbcec2339 Gcc 7 error expansion to defined
Summary:
sorry if these gcc-7/clang-4 cleanups are getting tedious.
Closes https://github.com/facebook/rocksdb/pull/1658

Differential Revision: D4318792

Pulled By: yiwu-arbug

fbshipit-source-id: 8e85891
2016-12-13 18:39:14 -08:00
Daniel Black
67adc937b6 intentional fallthough (prevents gcc-7/clang-4 error)
Summary:
db/memtable.cc: In member function 'void rocksdb::MemTable::Update(rocksdb::SequenceNumber, const rocksdb::Slice&, const rocksdb::Slice&)':
db/memtable.cc:736:11: error: this statement may fall through [-Werror=implicit-fallthrough=]
           }
           ^
db/memtable.cc:738:9: note: here
         default:
         ^~~~~~~
cc1plus: all warnings being treated as errors

closes #1650
Closes https://github.com/facebook/rocksdb/pull/1655

Differential Revision: D4318696

Pulled By: yiwu-arbug

fbshipit-source-id: 1a8981c
2016-12-13 14:39:17 -08:00
Islam AbdelRahman
1a146f89c7 break Flush wait for dropped CF
Summary:
In FlushJob we dont do the Flush if the CF is dropped
https://github.com/facebook/rocksdb/blob/master/db/flush_job.cc#L184-L188

but inside WaitForFlushMemTable we keep waiting forever even if the CF is dropped.
Closes https://github.com/facebook/rocksdb/pull/1664

Differential Revision: D4321032

Pulled By: IslamAbdelRahman

fbshipit-source-id: 6e2b25d
2016-12-13 14:09:12 -08:00
Yi Wu
36d42e65d0 Disable test to unblock travis build
Summary:
The two tests keep failing in travis. Disable them and will fix later.
Closes https://github.com/facebook/rocksdb/pull/1648

Differential Revision: D4316389

Pulled By: yiwu-arbug

fbshipit-source-id: 0a370e7
2016-12-13 11:54:14 -08:00
siddontang
b57dd9262a C API: support writebatch delete range
Summary:
Seem that writebatch delete range can work now, so I add C API for later use.

Btw, can we use this feature in production now?
Closes https://github.com/facebook/rocksdb/pull/1647

Differential Revision: D4314534

Pulled By: ajkr

fbshipit-source-id: e835165
2016-12-13 11:24:18 -08:00
Islam AbdelRahman
2ba59b5a1e Disallow ingesting files into dropped CFs
Summary:
This PR update IngestExternalFile to return an error if we try to ingest a file into a dropped CF.

Right now if IngestExternalFile want to flush a memtable, and it's ingesting a file into a dropped CF, it will wait forever since flushing is not possible for the dropped CF
Closes https://github.com/facebook/rocksdb/pull/1657

Differential Revision: D4318657

Pulled By: IslamAbdelRahman

fbshipit-source-id: ed6ea2b
2016-12-13 00:54:14 -08:00
Jonathan Lee
2cabdb8f44 Increase buffer size
Summary:
When compiling with GCC>=7.0.0, "db/internal_stats.cc" fails to compile as the data being written to the buffer potentially exceeds its size.

This fix simply doubles the size of the buffer, thus accommodating the max possible data size.
Closes https://github.com/facebook/rocksdb/pull/1635

Differential Revision: D4302162

Pulled By: yiwu-arbug

fbshipit-source-id: c76ad59
2016-12-09 11:54:22 -08:00
Jonathan Lee
4a17b47bb5 Remove unnecessary header include
Summary:
Remove "util/testharness.h" from list of includes for "db/db_filesnapshot.cc", as it wasn't being used and thus caused an extraneous dependency on gtest.
Closes https://github.com/facebook/rocksdb/pull/1634

Differential Revision: D4302146

Pulled By: yiwu-arbug

fbshipit-source-id: e900c0b
2016-12-09 11:54:21 -08:00
Mike Kolupaev
8c2b921fdf Fixed a crash in debug build in flush_job.cc
Summary:
It was doing `&range_del_iters[0]` on an empty vector. Even though the resulting pointer is never dereferenced, it's still bad for two reasons:
* the practical reason: it crashes with `std::out_of_range` exception in our debug build,
* the "C++ standard lawyer" reason: it's undefined behavior because, in `std::vector` implementation, it probably "dereferences" a null pointer, which is invalid even though it doesn't actually read the pointed memory, just converts a pointer into a reference (and then flush_job.cc converts it back to pointer); nullptr references are undefined behavior.
Closes https://github.com/facebook/rocksdb/pull/1612

Differential Revision: D4265625

Pulled By: al13n321

fbshipit-source-id: db26fb9
2016-12-09 10:39:12 -08:00
Islam AbdelRahman
20ce081fae Fix issue where IngestExternalFile insert blocks in block cache with g_seqno=0
Summary:
When we Ingest an external file we open it to read some metadata and first/last key
during doing that we insert blocks into the block cache with global_seqno = 0

If we move the file (did not copy it) into the DB, we will use these blocks with the wrong seqno in the read path
Closes https://github.com/facebook/rocksdb/pull/1627

Differential Revision: D4293332

Pulled By: yiwu-arbug

fbshipit-source-id: 3ce5523
2016-12-08 13:39:18 -08:00
zhangjinpeng1987
45c7ce1377 CompactRangeOptions C API
Summary:
Add C API for CompactRangeOptions.
Closes https://github.com/facebook/rocksdb/pull/1596

Differential Revision: D4252339

Pulled By: yiwu-arbug

fbshipit-source-id: f768f93
2016-12-07 17:54:14 -08:00
Andrew Kryczka
b821984d31 DeleteRange read path end-to-end tests
Summary: Closes https://github.com/facebook/rocksdb/pull/1592

Differential Revision: D4246260

Pulled By: ajkr

fbshipit-source-id: ce03fa2
2016-12-07 12:54:17 -08:00
Artemiy Kolesnikov
2f4fc539c6 Compaction::IsTrivialMove relaxing
Summary:
IsTrivialMove returns true if no input file overlaps with output_level+1 with more than max_compaction_bytes_ bytes.
Closes https://github.com/facebook/rocksdb/pull/1619

Differential Revision: D4278338

Pulled By: yiwu-arbug

fbshipit-source-id: 994c001
2016-12-07 11:54:11 -08:00
Islam AbdelRahman
ed8fbdb560 Add EventListener::OnExternalFileIngested() event
Summary:
Add EventListener::OnExternalFileIngested() to allow user to subscribe to external file ingestion events
Closes https://github.com/facebook/rocksdb/pull/1623

Differential Revision: D4285844

Pulled By: IslamAbdelRahman

fbshipit-source-id: 0b95a88
2016-12-06 14:09:17 -08:00
Mike Kolupaev
beb36d9c1e Fixed CompactionFilter::Decision::kRemoveAndSkipUntil
Summary:
Embarassingly enough, the first time I tried to use my new feature in logdevice it crashed with this assertion failure:

  db/pinned_iterators_manager.h:30: void rocksdb::PinnedIteratorsManager::StartPinning(): Assertion `pinning_enabled == false' failed

The issue was that `pinned_iters_mgr_.StartPinning()` was called but `pinned_iters_mgr_.ReleasePinnedData()` wasn't.
Closes https://github.com/facebook/rocksdb/pull/1611

Differential Revision: D4265622

Pulled By: al13n321

fbshipit-source-id: 747b10f
2016-12-05 15:24:11 -08:00
Islam AbdelRahman
67f37cf198 Allow user to specify a CF for SST files generated by SstFileWriter
Summary:
Allow user to explicitly specify that the generated file by SstFileWriter will be ingested in a specific CF.
This allow us to persist the CF id in the generated file
Closes https://github.com/facebook/rocksdb/pull/1615

Differential Revision: D4270422

Pulled By: IslamAbdelRahman

fbshipit-source-id: 7fb954e
2016-12-05 14:24:16 -08:00
Anton Safonov
9053fe2a5c Made delete_obsolete_files_period_micros option dynamic
Summary:
Made delete_obsolete_files_period_micros option dynamic. It can be updating using DB::SetDBOptions().
Closes https://github.com/facebook/rocksdb/pull/1595

Differential Revision: D4246569

Pulled By: tonek

fbshipit-source-id: d23f560
2016-12-05 14:24:16 -08:00
Islam AbdelRahman
edde954e7b fix clang build
Summary:
override is missing for FilterV2
Closes https://github.com/facebook/rocksdb/pull/1606

Differential Revision: D4263832

Pulled By: IslamAbdelRahman

fbshipit-source-id: d8b337a
2016-12-01 18:39:10 -08:00
Islam AbdelRahman
e39d080871 Fix travis (compile for clang < 3.9)
Summary:
Travis fail because it uses clang 3.6 which don't recognize
`__attribute__((__no_sanitize__("undefined")))`
Closes https://github.com/facebook/rocksdb/pull/1601

Differential Revision: D4257175

Pulled By: IslamAbdelRahman

fbshipit-source-id: fb4d1ab
2016-12-01 10:09:22 -08:00
fangchenliaohui
b77007df8b Bug: paralle_group status updated in WriteThread::CompleteParallelWorker
Summary:
Multi-write thread may update the status of the parallel_group in
WriteThread::CompleteParallelWorker if the status of Writer is not ok!
When copy write status to the paralle_group, the write thread just hold the
mutex of the the writer processed by itself. it is useless. The thread
should held the the leader of the parallel_group instead.
Closes https://github.com/facebook/rocksdb/pull/1598

Differential Revision: D4252335

Pulled By: siying

fbshipit-source-id: 3864cf7
2016-12-01 09:54:11 -08:00
Mike Kolupaev
247d0979aa Support for range skips in compaction filter
Summary:
This adds the ability for compaction filter to say "drop this key-value, and also drop everything up to key x". This will cause the compaction to seek input iterator to x, without reading the data. This can make compaction much faster when large consecutive chunks of data are filtered out. See the changes in include/rocksdb/compaction_filter.h for the new API.

Along the way this diff also adds ability for compaction filter changing merge operands, similar to how it can change values; we're not going to use this feature, it just seemed easier and cleaner to implement it than to document that it's not implemented :)

The diff is not as big as it may seem, about half of the lines are a test.
Closes https://github.com/facebook/rocksdb/pull/1599

Differential Revision: D4252092

Pulled By: al13n321

fbshipit-source-id: 41e1e48
2016-12-01 07:09:15 -08:00
Panagiotis Ktistakis
96fcefbf1d c api: expose option for dynamic level size target
Summary: Closes https://github.com/facebook/rocksdb/pull/1587

Differential Revision: D4245923

Pulled By: yiwu-arbug

fbshipit-source-id: 6ee7291
2016-11-30 11:24:14 -08:00
zhangjinpeng1987
00197cff39 Add C API to set base_backgroud_compactions
Summary:
Add C API to set base_backgroud_compactions
Closes https://github.com/facebook/rocksdb/pull/1571

Differential Revision: D4245709

Pulled By: yiwu-arbug

fbshipit-source-id: 792c6b8
2016-11-30 11:09:13 -08:00
Andrew Kryczka
5b219eccb5 deleterange end-to-end test improvements for lite/robustness
Summary: Closes https://github.com/facebook/rocksdb/pull/1591

Differential Revision: D4246019

Pulled By: ajkr

fbshipit-source-id: 0c4aa37
2016-11-29 12:24:13 -08:00
Andrew Kryczka
e333528991 DeleteRange write path end-to-end tests
Summary: Closes https://github.com/facebook/rocksdb/pull/1578

Differential Revision: D4241171

Pulled By: ajkr

fbshipit-source-id: ce5fd83
2016-11-29 11:09:22 -08:00
Siying Dong
7784980fcd Fix mis-reporting of compaction read bytes to the base level
Summary:
In dynamic leveled compaction, when calculating read bytes, output level bytes may be wronglyl calculated as input level inputs. Fix it.
Closes https://github.com/facebook/rocksdb/pull/1475

Differential Revision: D4148412

Pulled By: siying

fbshipit-source-id: f2f475a
2016-11-29 11:09:22 -08:00
Islam AbdelRahman
3c6b49ed66 Fix implicit conversion between int64_t to int
Summary:
Make conversion explicit, implicit conversion breaks the build
Closes https://github.com/facebook/rocksdb/pull/1589

Differential Revision: D4245158

Pulled By: IslamAbdelRahman

fbshipit-source-id: aaec00d
2016-11-29 10:54:15 -08:00
Siying Dong
b3b875657f Remove unused assignment in db/db_iter.cc
Summary:
"make analyze" complains the assignment is not useful. Remove it.
Closes https://github.com/facebook/rocksdb/pull/1581

Differential Revision: D4241697

Pulled By: siying

fbshipit-source-id: 178f67a
2016-11-29 09:09:14 -08:00
Andrew Kryczka
4f6e89b1d0 Fix range deletion covering key in same SST file
Summary:
AddTombstones() needs to be before t->Get(), oops :'(
Closes https://github.com/facebook/rocksdb/pull/1576

Differential Revision: D4241041

Pulled By: ajkr

fbshipit-source-id: 781ceea
2016-11-28 22:54:13 -08:00
Islam AbdelRahman
a2bf265a39 Avoid intentional overflow in GetL0ThresholdSpeedupCompaction
Summary:
99c052a34f fixes integer overflow in GetL0ThresholdSpeedupCompaction() by checking if int become -ve.
UBSAN will complain about that since this is still an overflow, we can fix the issue by simply using int64_t
Closes https://github.com/facebook/rocksdb/pull/1582

Differential Revision: D4241525

Pulled By: IslamAbdelRahman

fbshipit-source-id: b3ae21f
2016-11-28 18:39:13 -08:00
Islam AbdelRahman
52fd1ff2c2 disable UBSAN for functions with intentional -ve shift / overflow
Summary:
disable UBSAN for functions with intentional left shift on -ve number / overflow

These functions are
rocksdb:: Hash
FixedLengthColBufEncoder::Append
FaultInjectionTest:: Key
Closes https://github.com/facebook/rocksdb/pull/1577

Differential Revision: D4240801

Pulled By: IslamAbdelRahman

fbshipit-source-id: 3e1caf6
2016-11-28 17:54:12 -08:00
Islam AbdelRahman
1886c435b9 Fix CompactionJob::Install division by zero
Summary:
Fix CompactionJob::Install division by zero
Closes https://github.com/facebook/rocksdb/pull/1580

Differential Revision: D4240794

Pulled By: IslamAbdelRahman

fbshipit-source-id: 7286721
2016-11-28 16:54:16 -08:00
Islam AbdelRahman
13e66a8f51 Fix compaction_job.cc division by zero
Summary:
Fix division by zero in compaction_job.cc
Closes https://github.com/facebook/rocksdb/pull/1575

Differential Revision: D4240818

Pulled By: IslamAbdelRahman

fbshipit-source-id: a8bc757
2016-11-28 16:39:13 -08:00
Andrew Kryczka
01eabf7375 Fix double-counted deletion stat
Summary:
Both the single deletion and the value are included in compaction outputs, so no need to update the stat for the value's deletion yet, otherwise it'd be double-counted.
Closes https://github.com/facebook/rocksdb/pull/1574

Differential Revision: D4241181

Pulled By: ajkr

fbshipit-source-id: c9aaa15
2016-11-28 15:54:12 -08:00
Andrew Kryczka
7ffb10fc1a DeleteRange compaction statistics
Summary:
- "rocksdb.compaction.key.drop.range_del" - number of keys dropped during compaction due to a range tombstone covering them
- "rocksdb.compaction.range_del.drop.obsolete" - number of range tombstones dropped due to compaction to bottom level and no snapshot saving them
- s/CompactionIteratorStats/CompactionIterationStats/g since this class is no longer specific to CompactionIterator -- it's also updated for range tombstone iteration during compaction
- Move the above class into a separate .h file to avoid circular dependency.
Closes https://github.com/facebook/rocksdb/pull/1520

Differential Revision: D4187179

Pulled By: ajkr

fbshipit-source-id: 10c2103
2016-11-28 11:54:12 -08:00
Mike Kolupaev
236d4c67e9 Less linear search in DBIter::Seek() when keys are overwritten a lot
Summary:
In one deployment we saw high latencies (presumably from slow iterator operations) and a lot of CPU time reported by perf with this stack:

```
  rocksdb::MergingIterator::Next
  rocksdb::DBIter::FindNextUserEntryInternal
  rocksdb::DBIter::Seek
```

I think what's happening is:
1. we create a snapshot iterator,
2. we do lots of Put()s for the same key x; this creates lots of entries in memtable,
3. we seek the iterator to a key slightly smaller than x,
4. the seek walks over lots of entries in memtable for key x, skipping them because of high sequence numbers.

CC IslamAbdelRahman
Closes https://github.com/facebook/rocksdb/pull/1413

Differential Revision: D4083879

Pulled By: IslamAbdelRahman

fbshipit-source-id: a83ddae
2016-11-28 10:24:11 -08:00
Siying Dong
cd7c4143d7 Improve Write Stalling System
Summary:
Current write stalling system has the problem of lacking of positive feedback if the restricted rate is already too low. Users sometimes stack in very low slowdown value. With the diff, we add a positive feedback (increasing the slowdown value) if we recover from slowdown state back to normal. To avoid the positive feedback to keep the slowdown value to be to high, we add issue a negative feedback every time we are close to the stop condition. Experiments show it is easier to reach a relative balance than before.

Also increase level0_stop_writes_trigger default from 24 to 32. Since level0_slowdown_writes_trigger default is 20, stop trigger 24 only gives four files as the buffer time to slowdown writes. In order to avoid stop in four files while 20 files have been accumulated, the slowdown value must be very low, which is amost the same as stop. It also doesn't give enough time for the slowdown value to converge. Increase it to 32 will smooth out the system.
Closes https://github.com/facebook/rocksdb/pull/1562

Differential Revision: D4218519

Pulled By: siying

fbshipit-source-id: 95e4088
2016-11-23 09:24:15 -08:00
Yi Wu
dfb6fe6755 Unified InlineSkipList::Insert algorithm with hinting
Summary:
This PR is based on nbronson's diff with small
modifications to wire it up with existing interface. Comparing to
previous version, this approach works better for inserting keys in
decreasing order or updating the same key, and impose less restriction
to the prefix extractor.

---- Summary from original diff ----

This diff introduces a single InlineSkipList::Insert that unifies
the existing sequential insert optimization (prev_), concurrent insertion,
and insertion using externally-managed insertion point hints.

There's a deep symmetry between insertion hints (cursors) and the
concurrent algorithm.  In both cases we have partial information from
the recent past that is likely but not certain to be accurate.  This diff
introduces the struct InlineSkipList::Splice, which encodes predecessor
and successor information in the same form that was previously only used
within a single call to InsertConcurrently.  Splice holds information
about an insertion point that can be used to levera
Closes https://github.com/facebook/rocksdb/pull/1561

Differential Revision: D4217283

Pulled By: yiwu-arbug

fbshipit-source-id: 33ee437
2016-11-22 14:09:13 -08:00
Andrew Kryczka
734e4acafb Eliminate redundant cache lookup with range deletion
Summary:
When we introduced range deletion block, TableCache::Get() and TableCache::NewIterator() each did two table cache lookups, one for range deletion block iterator and another for getting the table reader to which the Get()/NewIterator() is delegated. This extra cache lookup was very CPU-intensive (about 10% overhead in a read-heavy benchmark). We can avoid it by reusing the Cache::Handle created for range deletion block iterator to get the file reader.
Closes https://github.com/facebook/rocksdb/pull/1537

Differential Revision: D4201167

Pulled By: ajkr

fbshipit-source-id: d33ffd8
2016-11-21 21:24:11 -08:00
Maysam Yabandeh
182b940e70 Add WriteOptions.no_slowdown
Summary:
If the WriteOptions.no_slowdown flag is set AND we need to wait or sleep for
the write request, then fail immediately with Status::Incomplete().
Closes https://github.com/facebook/rocksdb/pull/1527

Differential Revision: D4191405

Pulled By: maysamyabandeh

fbshipit-source-id: 7f3ce3f
2016-11-21 18:09:13 -08:00
Karthikeyan Radhakrishnan
4118e13330 Persistent Cache: Expose stats to user via public API
Summary:
Exposing persistent cache stats (counters) to the user via public API.
Closes https://github.com/facebook/rocksdb/pull/1485

Differential Revision: D4155274

Pulled By: siying

fbshipit-source-id: 30a9f50
2016-11-21 17:39:13 -08:00
Andrew Kryczka
fd43ee09da Range deletion microoptimizations
Summary:
- Made RangeDelAggregator's InternalKeyComparator member a reference-to-const so we don't need to copy-construct it. Also added InternalKeyComparator to ImmutableCFOptions so we don't need to construct one for each DBIter.
- Made MemTable::NewRangeTombstoneIterator and the table readers' NewRangeTombstoneIterator() functions return nullptr instead of NewEmptyInternalIterator to avoid the allocation. Updated callers accordingly.
Closes https://github.com/facebook/rocksdb/pull/1548

Differential Revision: D4208169

Pulled By: ajkr

fbshipit-source-id: 2fd65cf
2016-11-21 12:24:13 -08:00
Andrew Kryczka
fe349db57b Remove Arena in RangeDelAggregator
Summary:
The Arena construction/destruction introduced significant overhead to read-heavy workload just by creating empty vectors for its blocks, so avoid it in RangeDelAggregator.
Closes https://github.com/facebook/rocksdb/pull/1547

Differential Revision: D4207781

Pulled By: ajkr

fbshipit-source-id: 9d1c130
2016-11-19 14:24:12 -08:00
Andrew Kryczka
3f62215210 Lazily initialize RangeDelAggregator's map and pinning manager
Summary:
Since a RangeDelAggregator is created for each read request, these heap-allocating member variables were consuming significant CPU (~3% total) which slowed down request throughput. The map and pinning manager are only necessary when range deletions exist, so we can defer their initialization until the first range deletion is encountered. Currently lazy initialization is done for reads only since reads pass us a single snapshot, which is easier to store on the stack for later insertion into the map than the vector passed to us by flush or compaction.

Note the Arena member variable is still expensive, I will figure out what to do with it in a subsequent diff. It cannot be lazily initialized because we currently use this arena even to allocate empty iterators, which is necessary even when no range deletions exist.
Closes https://github.com/facebook/rocksdb/pull/1539

Differential Revision: D4203488

Pulled By: ajkr

fbshipit-source-id: 3b36279
2016-11-18 17:09:11 -08:00
Andrew Kryczka
635a7bd1ad refactor TableCache Get/NewIterator for single exit points
Summary:
these functions were too complicated to change with exit points everywhere, so refactored them.

btw, please review urgently, this is a prereq to fix the 5.0 perf regression
Closes https://github.com/facebook/rocksdb/pull/1534

Differential Revision: D4198972

Pulled By: ajkr

fbshipit-source-id: 04ebfb7
2016-11-17 14:39:13 -08:00
Siying Dong
a4eb7387b2 Allow plain table to store index on file with bloom filter disabled
Summary:
Currently plain table bloom filter is required if storing metadata on file. Remove the constraint.
Closes https://github.com/facebook/rocksdb/pull/1525

Differential Revision: D4190977

Pulled By: siying

fbshipit-source-id: be60442
2016-11-17 11:09:13 -08:00
Yi Wu
36e4762ce0 Remove Ticker::SEQUENCE_NUMBER
Summary:
Remove the ticker count because:
* Having to reset the ticker count in WriteImpl is ineffiecent;
* It doesn't make sense to have it as a ticker count if multiple db
  instance share a statistics object.
Closes https://github.com/facebook/rocksdb/pull/1531

Differential Revision: D4194442

Pulled By: yiwu-arbug

fbshipit-source-id: e2110a9
2016-11-16 22:39:09 -08:00
Andrew Kryczka
760ef68a69 fix deleterange asan issue
Summary:
pinned_iters_mgr_ pins iterators allocated with arena_, so we should order the
instance variable declarations such that the pinned iterators have their destructors
executed before the arena is destroyed.
Closes https://github.com/facebook/rocksdb/pull/1528

Differential Revision: D4191984

Pulled By: ajkr

fbshipit-source-id: 1386f20
2016-11-16 14:09:07 -08:00
Siying Dong
972e3ff295 Enable allow_concurrent_memtable_write and enable_write_thread_adaptive_yield by default
Summary: Closes https://github.com/facebook/rocksdb/pull/1496

Differential Revision: D4168080

Pulled By: siying

fbshipit-source-id: 056ae62
2016-11-16 09:39:09 -08:00
Yi Wu
1543d5d92e Report memory usage by memtable insert hints map.
Summary:
It is hard to measure acutal memory usage by std containers. Even
providing a custom allocator will miss count some of the usage. Here we
only do a wild guess on its memory usage.
Closes https://github.com/facebook/rocksdb/pull/1511

Differential Revision: D4179945

Pulled By: yiwu-arbug

fbshipit-source-id: 32ab929
2016-11-15 20:24:13 -08:00
Andrew Kryczka
48e8baebc0 Decouple data iterator and range deletion iterator in TableCache
Summary:
Previously we used TableCache::NewIterator() for multiple purposes (data
block iterator and range deletion iterator), and returned non-ok status in
the data block iterator. In one case where the caller only used the range
deletion block iterator (9e7cf3469b/db/version_set.cc (L965-L973)),
we didn't check/free the data block iterator containing non-ok status, which
caused a valgrind error.

So, this diff decouples creation of data block and range deletion block iterators,
and updates the callers accordingly. Both functions can return non-ok status
in an InternalIterator. Since the non-ok status is returned in an iterator that the
callers will definitely use, it should be more usable/less error-prone.
Closes https://github.com/facebook/rocksdb/pull/1513

Differential Revision: D4181423

Pulled By: ajkr

fbshipit-source-id: 835b8f5
2016-11-15 17:24:28 -08:00
Andrew Kryczka
661e4c9267 DeleteRange unsupported in non-block-based tables
Summary:
Return an error from DeleteRange() (or Write() if the user is using the
low-level WriteBatch API) if an unsupported table type is configured.
Closes https://github.com/facebook/rocksdb/pull/1519

Differential Revision: D4185933

Pulled By: ajkr

fbshipit-source-id: abcdf84
2016-11-15 15:24:16 -08:00
Andrew Kryczka
489d142808 DeleteRange interface
Summary:
Expose DeleteRange() interface since we think the implementation is functionally correct now.
Closes https://github.com/facebook/rocksdb/pull/1503

Differential Revision: D4171921

Pulled By: ajkr

fbshipit-source-id: 5e21c98
2016-11-15 15:24:16 -08:00
Islam AbdelRahman
eba99c28e4 Fix min_write_buffer_number_to_merge = 0 bug
Summary:
It's possible that we set min_write_buffer_number_to_merge to 0.
This should never happen
Closes https://github.com/facebook/rocksdb/pull/1515

Differential Revision: D4183356

Pulled By: yiwu-arbug

fbshipit-source-id: c9d39d7
2016-11-15 13:54:08 -08:00
Artemiy Kolesnikov
91300d01f6 Dynamic max_total_wal_size option
Summary: Closes https://github.com/facebook/rocksdb/pull/1509

Differential Revision: D4176426

Pulled By: yiwu-arbug

fbshipit-source-id: b57689d
2016-11-14 22:54:17 -08:00
Andrew Kryczka
ec2f64794b Consider subcompaction boundaries when updating file boundaries for range deletion
Summary:
Adjusted AddToBuilder() to take lower_bound and upper_bound, which serve two purposes: (1) only range deletions overlapping with the interval [lower_bound, upper_bound) will be added to the output file, and (2) the output file's boundaries will not be extended before lower_bound or after upper_bound. Our computation of lower_bound/upper_bound consider both subcompaction boundaries and previous/next files within the subcompaction.

Test cases are here (level subcompactions: https://gist.github.com/ajkr/63c7eae3e9667c5ebdc0a7efb74ac332, and universal subcompactions: https://gist.github.com/ajkr/5a62af77c4ebe4052a1955c496d51fdb) but can't be included in this diff as they depend on committing the API first. They fail before this change and pass after.
Closes https://github.com/facebook/rocksdb/pull/1501

Reviewed By: yhchiang

Differential Revision: D4171685

Pulled By: ajkr

fbshipit-source-id: ee99db8
2016-11-14 20:24:21 -08:00
Andrew Kryczka
3b192f6186 Handle full final subcompaction output file with range deletions
Summary:
This conditional should only open a new file that's dedicated to range deletions when it's the sole output of the subcompaction. Previously, we created such a file whenever the table builder was nullptr, which would've also been the case whenever the CompactionIterator's final key coincided with the final output table becoming full.
Closes https://github.com/facebook/rocksdb/pull/1507

Differential Revision: D4174613

Pulled By: ajkr

fbshipit-source-id: 9ffacea
2016-11-14 17:54:20 -08:00
Andrew Kryczka
6c57952002 Make range deletion inclusive-exclusive
Summary:
This makes it easier to implement future optimizations like range collapsing.
Closes https://github.com/facebook/rocksdb/pull/1504

Differential Revision: D4172214

Pulled By: ajkr

fbshipit-source-id: ac4942f
2016-11-14 17:39:13 -08:00
Yi Wu
1ea79a78c9 Optimize sequential insert into memtable - Part 1: Interface
Summary:
Currently our skip-list have an optimization to speedup sequential
inserts from a single stream, by remembering the last insert position.
We extend the idea to support sequential inserts from multiple streams,
and even tolerate small reordering wihtin each stream.

This PR is the interface part adding the following:
- Add `memtable_insert_prefix_extractor` to allow specifying prefix for each key.
- Add `InsertWithHint()` interface to memtable, to allow underlying
  implementation to return a hint of insert position, which can be later
  pass back to optimize inserts.
- Memtable will maintain a map from prefix to hints and pass the hint
  via `InsertWithHint()` if `memtable_insert_prefix_extractor` is non-null.
Closes https://github.com/facebook/rocksdb/pull/1419

Differential Revision: D4079367

Pulled By: yiwu-arbug

fbshipit-source-id: 3555326
2016-11-13 19:09:18 -08:00
Yi Wu
df5eeb85ca Optimize sequential insert into memtable - Part 2: Implementation
Summary:
Implement a insert hint into skip-list to hint insert position. This is
to optimize for the write workload where there are multiple stream of
sequential writes. For example, there is a stream of keys of a1, a2,
a3... but also b1, b2, b2... Each stream are not neccessary strictly
sequential, but can get reorder a little bit. User can specify a prefix
extractor and the `SkipListRep` can thus maintan a hint for each of the
stream for fast insert into memtable.

This is the internal implementation part. See #1419 for the interface part.
See inline comments for details.
Closes https://github.com/facebook/rocksdb/pull/1449

Differential Revision: D4106781

Pulled By: yiwu-arbug

fbshipit-source-id: f4d48c4
2016-11-13 13:09:16 -08:00
Islam AbdelRahman
5ed650857d Fix SstFileWriter destructor
Summary:
If user did not call SstFileWriter::Finish() or called Finish() but it failed.
We need to abandon the builder, to avoid destructing it while it's open
Closes https://github.com/facebook/rocksdb/pull/1502

Differential Revision: D4171660

Pulled By: IslamAbdelRahman

fbshipit-source-id: ab6f434
2016-11-12 20:11:19 -08:00
Lijun Tang
adb665e0bf Allowed delayed_write_rate option to be dynamically set.
Summary: Closes https://github.com/facebook/rocksdb/pull/1488

Differential Revision: D4157784

Pulled By: siying

fbshipit-source-id: f150081
2016-11-12 15:54:11 -08:00
Maysam Yabandeh
361010d447 Exporting compaction stats in the form of a map
Summary:
Currently the compaction stats are printed to stdout. We want to export the compaction stats in a map format so that the upper layer apps (e.g., MySQL) could present
the stats in any format required by the them.
Closes https://github.com/facebook/rocksdb/pull/1477

Differential Revision: D4149836

Pulled By: maysamyabandeh

fbshipit-source-id: b3df19f
2016-11-11 20:54:14 -08:00
Aaron Gao
b39b2ee12f do not call get() in recovery mode
Summary:
This is a previous fix that has a typo
Closes https://github.com/facebook/rocksdb/pull/1487

Differential Revision: D4157381

Pulled By: lightmark

fbshipit-source-id: f079be8
2016-11-10 11:24:20 -08:00
Reid Horuff
1ca5f6d132 Fix 2PC Recovery SeqId Miscount
Summary:
Originally sequence ids were calculated, in recovery, based off of the first seqid found if the first log recovered. The working seqid was then incremented from that value based on every insertion that took place. This was faulty because of the potential for missing log files or inserts that skipped the WAL. The current recovery scheme grabs sequence from current recovering batch and increments using memtableinserter to track how many actual inserts take place. This works for 2PC batches as well scenarios where some logs are missing or inserts that skip the WAL.
Closes https://github.com/facebook/rocksdb/pull/1486

Differential Revision: D4156064

Pulled By: reidHoruff

fbshipit-source-id: a6da8d9
2016-11-10 11:09:22 -08:00
Andrew Kryczka
c90fef88b1 fix open failure with empty wal
Summary: Closes https://github.com/facebook/rocksdb/pull/1490

Differential Revision: D4158821

Pulled By: IslamAbdelRahman

fbshipit-source-id: 59b73f4
2016-11-09 22:24:26 -08:00
Andrew Kryczka
4e20c5da20 Store internal keys in TombstoneMap
Summary:
This fixes a correctness issue where ranges with same begin key would overwrite each other.

This diff uses InternalKey as TombstoneMap's key such that all tombstones have unique keys even when their start keys overlap. We also update TombstoneMap to use an internal key comparator.

End-to-end tests pass and are here (https://gist.github.com/ajkr/851ffe4c1b8a15a68d33025be190a7d9) but cannot be included yet since the DeleteRange() API is yet to be checked in. Note both tests failed before this fix.
Closes https://github.com/facebook/rocksdb/pull/1484

Differential Revision: D4155248

Pulled By: ajkr

fbshipit-source-id: 304b4b9
2016-11-09 15:09:18 -08:00
Yueh-Hsuan Chiang
a9fb346e4a Fix RocksDB Lite build failure in c_test.cc
Summary:
Fix the following RocksDB Lite build failure in c_test.cc

db/c_test.c:1051:3: error: implicit declaration of function 'fprintf' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
  fprintf(stderr, "SKIPPED\n");
  ^
db/c_test.c:1051:3: error: declaration of built-in function 'fprintf' requires inclusion of the header <stdio.h> [-Werror,-Wbuiltin-requires-header]
db/c_test.c:1051:11: error: use of undeclared identifier 'stderr'
  fprintf(stderr, "SKIPPED\n");
          ^
3 errors generated.
Closes https://github.com/facebook/rocksdb/pull/1479

Differential Revision: D4151160

Pulled By: yhchiang

fbshipit-source-id: a471a30
2016-11-09 12:24:18 -08:00
Reid Horuff
d133b08f68 Use correct sequence number when creating memtable
Summary:
copied from: 5ebfd2623a

Opening existing RocksDB attempts recovery from log files, which uses
wrong sequence number to create the memtable. This is a regression
introduced in change a400336.

This change includes a test demonstrating the problem, without the fix
the test fails with "Operation failed. Try again.: Transaction could not
check for conflicts for operation at SequenceNumber 1 as the MemTable
only contains changes newer than SequenceNumber 2.  Increasing the value
of the max_write_buffer_number_to_maintain option could reduce the
frequency of this error"

This change is a joint effort by Peter 'Stig' Edwards thatsafunnyname
and me.
Closes https://github.com/facebook/rocksdb/pull/1458

Differential Revision: D4143791

Pulled By: reidHoruff

fbshipit-source-id: 5a25033
2016-11-09 12:24:17 -08:00
Islam AbdelRahman
9bd191d2f4 Fix deadlock between (WriterThread/Compaction/IngestExternalFile)
Summary:
A deadlock is possible if this happen

(1) Writer thread is stopped because it's waiting for compaction to finish
(2) Compaction is waiting for current IngestExternalFile() calls to finish
(3) IngestExternalFile() is waiting to be able to acquire the writer thread
(4) WriterThread is held by stopped writes that are waiting for compactions to finish

This patch fix the issue by not incrementing num_running_ingest_file_ except when we acquire the writer thread.

This patch include a unittest to reproduce the described scenario
Closes https://github.com/facebook/rocksdb/pull/1480

Differential Revision: D4151646

Pulled By: IslamAbdelRahman

fbshipit-source-id: 09b39db
2016-11-09 10:54:10 -08:00
Islam AbdelRahman
193221e0a1 Fix Forward Iterator Seek()/SeekToFirst()
Summary:
In ForwardIterator::SeekInternal(), we may end up passing empty Slice representing an internal key to InternalKeyComparator::Compare.
and when we try to extract the user key from this empty Slice, we will create a slice with size = 0 - 8 ( which will overflow and cause us to read invalid memory as well )

Scenarios to reproduce these issues are in the unit tests
Closes https://github.com/facebook/rocksdb/pull/1467

Differential Revision: D4136660

Pulled By: lightmark

fbshipit-source-id: 151e128
2016-11-08 13:54:31 -08:00
Aaron Gao
e48f3f8b9e remove tabs and duplicate #include in c api
Summary:
fix lint error about tabs and duplicate includes.
Closes https://github.com/facebook/rocksdb/pull/1476

Differential Revision: D4149646

Pulled By: lightmark

fbshipit-source-id: 2e0a632
2016-11-08 13:54:31 -08:00
Jay Lee
a7875272d7 c: support seek_for_prev
Summary:
support seek_for_prev in c abi.
Closes https://github.com/facebook/rocksdb/pull/1457

Differential Revision: D4135360

Pulled By: lightmark

fbshipit-source-id: 61256b0
2016-11-08 12:54:13 -08:00
Andrew Kryczka
9e7cf3469b DeleteRange user iterator support
Summary:
Note: reviewed in  https://reviews.facebook.net/D65115

- DBIter maintains a range tombstone accumulator. We don't cleanup obsolete tombstones yet, so if the user seeks back and forth, the same tombstones would be added to the accumulator multiple times.
- DBImpl::NewInternalIterator() (used to make DBIter's underlying iterator) adds memtable/L0 range tombstones, L1+ range tombstones are added on-demand during NewSecondaryIterator() (see D62205)
- DBIter uses ShouldDelete() when advancing to check whether keys are covered by range tombstones
Closes https://github.com/facebook/rocksdb/pull/1464

Differential Revision: D4131753

Pulled By: ajkr

fbshipit-source-id: be86559
2016-11-04 12:09:22 -07:00
Andrew Kryczka
f998c9790f DeleteRange Get support
Summary:
During Get()/MultiGet(), build up a RangeDelAggregator with range
tombstones as we search through live memtable, immutable memtables, and
SST files. This aggregator is then used by memtable.cc's SaveValue() and
GetContext::SaveValue() to check whether keys are covered.

added tests for Get on memtables/files; end-to-end tests mainly in https://reviews.facebook.net/D64761
Closes https://github.com/facebook/rocksdb/pull/1456

Differential Revision: D4111271

Pulled By: ajkr

fbshipit-source-id: 6e388d4
2016-11-03 18:54:20 -07:00
zhangjinpeng1987
879f366366 Add C api for RateLimiter
Summary:
Add C api for RateLimiter.
Closes https://github.com/facebook/rocksdb/pull/1455

Differential Revision: D4116362

Pulled By: yiwu-arbug

fbshipit-source-id: cb05a8d
2016-11-03 11:09:17 -07:00
Yi Wu
437942e481 Add avoid_flush_during_shutdown DB option
Summary:
Add avoid_flush_during_shutdown DB option.
Closes https://github.com/facebook/rocksdb/pull/1451

Differential Revision: D4108643

Pulled By: yiwu-arbug

fbshipit-source-id: abdaf4d
2016-11-02 15:39:18 -07:00
Benoit Girard
2b16d664cb Change max_bytes_for_level_multiplier to double
Summary: Closes https://github.com/facebook/rocksdb/pull/1427

Differential Revision: D4094732

Pulled By: yiwu-arbug

fbshipit-source-id: b9b79e9
2016-11-01 21:09:23 -07:00
Jay Lee
16fb04434f expose IngestExternalFile to c abi
Summary:
IngestExternalFile is very useful when doing bulk load. This pr expose this API to c so many bindings can benefit from it too.
Closes https://github.com/facebook/rocksdb/pull/1454

Differential Revision: D4113420

Pulled By: yiwu-arbug

fbshipit-source-id: 307c6ae
2016-11-01 17:09:39 -07:00
Andrew Kryczka
40a2e406f8 DeleteRange flush support
Summary:
Changed BuildTable() (used for flush) to (1) add range
tombstones to the aggregator, which is used by CompactionIterator to
determine which keys can be removed; and (2) add aggregator's range
tombstones to the table that is output for the flush.
Closes https://github.com/facebook/rocksdb/pull/1438

Differential Revision: D4100025

Pulled By: ajkr

fbshipit-source-id: cb01a70
2016-10-31 20:54:18 -07:00
Vladislav Vaintroub
d5555d95a3 Fix MSVC compile error in 32 bit compilation
Summary:
Passing std::atomic<uint64_t> variables to ASSERT_EQ()
results in compile error
C2718 'const T1': actual parameter with requested alignment of 8 won't be aligned.

VS2015 defines std::atomic as specially aligned type ( with 'alignas'),
however the compiler does not like declspec(align)ed  function
arguments.

Worked around by casting std::atomic<uint64_t> types to uint64_t
in ASSERT_EQ.
Closes https://github.com/facebook/rocksdb/pull/1450

Differential Revision: D4106788

Pulled By: yiwu-arbug

fbshipit-source-id: 5fb42c3
2016-10-31 17:24:18 -07:00
Siying Dong
da61f348d3 Print compression and Fast CRC support info as Header level
Summary:
Currently the compression suppport and fast CRC support information is printed as info level. They should be in the same level as options, which is header level.

Also add ZSTD to this printing.
Closes https://github.com/facebook/rocksdb/pull/1448

Differential Revision: D4106608

Pulled By: yiwu-arbug

fbshipit-source-id: cb9a076
2016-10-31 16:09:13 -07:00
Siying Dong
c90c48d3c8 Show More DB Stats in info logs
Summary:
DB Stats now are truncated if there are too many CFs. Extend the buffer size to allow more to be printed out. Also, separate out malloc to another log line.
Closes https://github.com/facebook/rocksdb/pull/1439

Differential Revision: D4100943

Pulled By: yiwu-arbug

fbshipit-source-id: 79f7218
2016-10-29 16:09:18 -07:00
Siying Dong
1b295ac8ae DBTest.GetThreadStatus: Wait for test results for longer
Summary:
The current 10 millisecond waiting for test results may not be sufficient in some test environments. Increase it to 60 seconds and check the results for every 1 milliseond.

Already reviewed: https://reviews.facebook.net/D65457
Closes https://github.com/facebook/rocksdb/pull/1437

Differential Revision: D4099443

Pulled By: siying

fbshipit-source-id: cf1f205
2016-10-29 16:09:18 -07:00
Aaron Gao
b50a81a2bb Add a test for tailing_iterator
Summary:
A bug that tailingIterator->Seek(target) skips records.

I think the bug is in the SeekInternal starting at lines 387:
search_left_bound > search_right_bound
There are only 2 cases this can happen:
(1) target key is smaller than left most file
(2) target key is larger than right most file

The comment is wrong, there is another possibility that at the higher level there is a big gap such that the file in the lower level fits completely in the gap and then
indexer->GetNextLevelIndex returns search_left_bound > search_right_bound I think pointing on the files after and before the gap.
details: https://github.com/facebook/rocksdb/issues/1372

fixed this bug with test case added.
Closes https://github.com/facebook/rocksdb/pull/1436

Reviewed By: IslamAbdelRahman

Differential Revision: D4099313

Pulled By: lightmark

fbshipit-source-id: 6a675b3
2016-10-28 18:24:14 -07:00
Siying Dong
04751d5345 L0 compression should follow options.compression_per_level if not empty
Summary:
Currently, we don't use options.compression_per_level[0] as the compression style for L0 compression type, unless it is None. This behavior
 doesn't look like on purpose. This diff will make sure L0 compress using the style of options.compression_per_level[0].

Reviewed and accepted in: https://reviews.facebook.net/D65607
Closes https://github.com/facebook/rocksdb/pull/1435

Differential Revision: D4099368

Pulled By: siying

fbshipit-source-id: cfbbdcd
2016-10-28 17:39:20 -07:00
Andrew Kryczka
2946cadc46 Improve RangeDelAggregator documentation
Summary:
as requested in D62259
Closes https://github.com/facebook/rocksdb/pull/1434

Differential Revision: D4099047

Pulled By: ajkr

fbshipit-source-id: a258cfb
2016-10-28 15:54:21 -07:00
Aaron Gao
bc429de490 revert fractional cascading in farward iterator
Summary: As offline discussion with Siying, revert this since it has bug with seek.

Test Plan: make check -j64

Reviewers: yiwu, andrewkr, sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D65559
2016-10-28 10:25:39 -07:00
Andrew Kryczka
b9bc7a2aa4 Use skiplist rep for range tombstone memtable
Summary: somehow missed committing this update in D62217

Test Plan: make check

Reviewers: sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D65361
2016-10-27 10:07:28 -07:00
Siying Dong
9ee84067f6 Disable DBTest.RepeatedWritesToSameKey (#1420)
Summary:
The verification condition of the test DBTest.RepeatedWritesToSameKey doesn't hold anymore after 3ce3bb3da2.
Disable the test for now before we find a way to replace it.

Test Plan: Run the test and make sure it is disabled.
2016-10-25 10:23:50 -07:00
Aaron Gao
9de2f75216 revert Prev() in MergingIterator to use previous code in non-prefix-seek mode
Summary: Siying suggested to keep old code for normal mode prev() for safety

Test Plan: make check -j64

Reviewers: yiwu, andrewkr, sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D65439
2016-10-24 13:13:01 -07:00
sdong
24495186da DBSSTTest.RateLimitedDelete: not to use real clock
Summary: Using real clock causes failures of DBSSTTest.RateLimitedDelete in some cases. Turn away from the real time. Use fake time instead.

Test Plan: Run the tests and all existing tests.

Reviewers: yiwu, IslamAbdelRahman

Reviewed By: IslamAbdelRahman

Subscribers: leveldb, andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D65145
2016-10-24 10:35:00 -07:00
sdong
1168cb810a Fix a bug that may cause a deleted row to appear again
Summary:
The previous fix of reappearing of a deleted row 0ce258f9b3 missed a corner case, which can be reproduced using test CompactionPickerTest.OverlappingUserKeys7. Consider such an example:

input level file: 1[B E] 2[F H]
output level file: 3[A C] 4[D I] 5[I K]

First file 2 is picked, which overlaps to file 4. 4 expands to 5. Now the all range is [D K] with 2 output level files. When we try to expand that, [D K] overlaps with file 1 and 2 in the input level, and 1 and 2 overlaps with 3 and 4 in the output level. So we end up with picking 3 and 4 in the output level. Without expanding, it also has 2 files, so we determine the output level doesn't change, although they are the different two files.

The fix is to expand the output level files after we picked 3 and 4. In that case, there will be three output level files so we will abort the expanding.

I also added two unit tests related to marked_for_compaction and being_compacted. They have been passing though.

Test Plan: Run the new unit test, as well as all other tests.

Reviewers: andrewkr, IslamAbdelRahman

Reviewed By: IslamAbdelRahman

Subscribers: yoshinorim, leveldb, andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D65373
2016-10-24 09:49:07 -07:00
Edouard A
99c052a34f Fix integer overflow in GetL0ThresholdSpeedupCompaction (#1378) 2016-10-23 18:43:29 -07:00
Aaron Gao
59a7c0337b Change ioptions to store user_comparator, fix bug
Summary:
change ioptions.comparator to user_comparator instread of internal_comparator.
Also change Comparator* to InternalKeyComparator* to make its type explicitly.

Test Plan: make all check -j64

Reviewers: andrewkr, sdong, yiwu

Reviewed By: yiwu

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D65121
2016-10-21 11:31:42 -07:00
Islam AbdelRahman
869ae5d786 Support IngestExternalFile (remove AddFile restrictions)
Summary:
Changes in the diff

API changes:
- Introduce IngestExternalFile to replace AddFile (I think this make the API more clear)
- Introduce IngestExternalFileOptions (This struct will encapsulate the options for ingesting the external file)
- Deprecate AddFile() API

Logic changes:
- If our file overlap with the memtable we will flush the memtable
- We will find the first level in the LSM tree that our file key range overlap with the keys in it
- We will find the lowest level in the LSM tree above the the level we found in step 2 that our file can fit in and ingest our file in it
- We will assign a global sequence number to our new file
- Remove AddFile restrictions by using global sequence numbers

Other changes:
- Refactor all AddFile logic to be encapsulated in ExternalSstFileIngestionJob

Test Plan:
unit tests (still need to add more)
addfile_stress (https://reviews.facebook.net/D65037)

Reviewers: yiwu, andrewkr, lightmark, yhchiang, sdong

Reviewed By: sdong

Subscribers: jkedgar, hcz, andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D65061
2016-10-20 17:05:32 -07:00
sdong
1d9dbef64e Restrict running condition of UniversalCompactionTrivialMoveTest2
Summary: DBTestUniversalCompaction.UniversalCompactionTrivialMoveTest2 verifies non-trivial move is not triggered if we load data in sequential order. However, if there are multiple compaction threads, this conditon may not hold. Restrict the running condition to 1 compaction thread to make the test more robust.

Test Plan: Run the test and make sure at least it doesn't regress normally.

Reviewers: yhchiang, andrewkr, IslamAbdelRahman

Reviewed By: IslamAbdelRahman

Subscribers: leveldb, andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D65277
2016-10-20 15:43:00 -07:00
sdong
fb2e412943 column_family_test: disable some tests in LITE
Summary: Some tests in column_family_test depend on functions that are not available in LITE build, which sometimes cause flakiness. Disable them.

Test Plan: Run those tests in LITE build.

Reviewers: yiwu, IslamAbdelRahman

Reviewed By: IslamAbdelRahman

Subscribers: leveldb, andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D65271
2016-10-19 15:55:56 -07:00
Aaron Gao
5af651db24 fix data race in compact_files_test
Summary: fix data race

Test Plan: compact_files_test

Reviewers: sdong, yiwu, andrewkr

Reviewed By: andrewkr

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D65259
2016-10-19 13:37:51 -07:00
Andrew Kryczka
a0ba0aa877 Fix uninitialized variable gcc error for MyRocks
Summary: make sure seq_ is properly initialized even if ParseInternalKey() fails.

Test Plan: run myrocks release tests

Reviewers: lightmark, mung, sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D65199
2016-10-19 10:59:46 -07:00
Islam AbdelRahman
b88f8e87c5 Support SST files with Global sequence numbers [reland]
Summary:
reland https://reviews.facebook.net/D62523

- Update SstFileWriter to include a property for a global sequence number in the SST file `rocksdb.external_sst_file.global_seqno`
- Update TableProperties to be aware of the offset of each property in the file
- Update BlockBasedTableReader and Block to be able to honor the sequence number in `rocksdb.external_sst_file.global_seqno` property and use it to overwrite all sequence number in the file

Something worth mentioning is that we don't update the seqno in the index block since and when doing a binary search, the reason for that is that it's guaranteed that SST files with global seqno will have only one user_key and each key will have seqno=0 encoded in it, This mean that this key is greater than any other key with seqno> 0. That mean that we can actually keep the current logic for these blocks

Test Plan: unit tests

Reviewers: sdong, yhchiang

Subscribers: andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D65211
2016-10-18 16:59:37 -07:00
Aaron Gao
52c9808c3a not split file in compaciton on level 0
Summary: we should not split file on level 0 in compaction because it will fail the following verification of seqno order on level 0

Test Plan: check with filldeterministic in db_bench

Reviewers: yhchiang, andrewkr

Reviewed By: andrewkr

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D65193
2016-10-18 16:30:34 -07:00
Aaron Gao
5e0d6b4cc9 fix db_stress assertion failure
Summary: in rocksdb::DBIter::FindValueForCurrentKey(), last_not_merge_type could also be SingleDelete() which is omitted

Test Plan: db_iter_test

Reviewers: yhchiang, sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D65187
2016-10-18 16:07:10 -07:00
sdong
b4d07123c4 SamePrefixTest.InDomainTest to clear the test directory before testing
Summary: SamePrefixTest.InDomainTest may fail if the previous run of some test cases in prefix_test fail.

Test Plan: Run the test

Reviewers: lightmark, yhchiang, IslamAbdelRahman

Reviewed By: IslamAbdelRahman

Subscribers: leveldb, andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D65163
2016-10-18 14:01:10 -07:00
Islam AbdelRahman
aa09d03381 Avoid calling GetDBOptions() inside GetFromBatchAndDB()
Summary:
MyRocks hit a regression, @mung generated perf reports showing that the reason is the cost of calling `GetDBOptions()` inside `GetFromBatchAndDB()`
This diff avoid calling `GetDBOptions` and use the `ImmutableDBOptions` instead

Test Plan: make check -j64

Reviewers: sdong, yiwu

Reviewed By: yiwu

Subscribers: andrewkr, dhruba, mung

Differential Revision: https://reviews.facebook.net/D65151
2016-10-18 13:19:26 -07:00
Andrew Kryczka
6fbe96baf8 Compaction Support for Range Deletion
Summary:
This diff introduces RangeDelAggregator, which takes ownership of iterators
provided to it via AddTombstones(). The tombstones are organized in a two-level
map (snapshot stripe -> begin key -> tombstone). Tombstone creation avoids data
copy by holding Slices returned by the iterator, which remain valid thanks to pinning.

For compaction, we create a hierarchical range tombstone iterator with structure
matching the iterator over compaction input data. An aggregator based on that
iterator is used by CompactionIterator to determine which keys are covered by
range tombstones. In case of merge operand, the same aggregator is used by
MergeHelper. Upon finishing each file in the compaction, relevant range tombstones
are added to the output file's range tombstone metablock and file boundaries are
updated accordingly.

To check whether a key is covered by range tombstone, RangeDelAggregator::ShouldDelete()
considers tombstones in the key's snapshot stripe. When this function is used outside of
compaction, it also checks newer stripes, which can contain covering tombstones. Currently
the intra-stripe check involves a linear scan; however, in the future we plan to collapse ranges
within a stripe such that binary search can be used.

RangeDelAggregator::AddToBuilder() adds all range tombstones in the table's key-range
to a new table's range tombstone meta-block. Since range tombstones may fall in the gap
between files, we may need to extend some files' key-ranges. The strategy is (1) first file
extends as far left as possible and other files do not extend left, (2) all files extend right
until either the start of the next file or the end of the last range tombstone in the gap,
whichever comes first.

One other notable change is adding release/move semantics to ScopedArenaIterator
such that it can be used to transfer ownership of an arena-allocated iterator, similar to
how unique_ptr is used for malloc'd data.

Depends on D61473

Test Plan: compaction_iterator_test, mock_table, end-to-end tests in D63927

Reviewers: sdong, IslamAbdelRahman, wanning, yhchiang, lightmark

Reviewed By: lightmark

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D62205
2016-10-18 12:04:56 -07:00
Andrew Kryczka
f47054015d Handle WAL deletion when using avoid_flush_during_recovery
Summary:
Previously the WAL files that were avoided during recovery would never
be considered for deletion. That was because alive_log_files_ was only
populated when log files are created. This diff further populates
alive_log_files_ with existing log files that aren't flushed during recovery,
such that FindObsoleteFiles() can find them later.

Depends on D64053.

Test Plan: new unit test, verifies it fails before this change and passes after

Reviewers: sdong, IslamAbdelRahman, yiwu

Reviewed By: yiwu

Subscribers: leveldb, dhruba, andrewkr

Differential Revision: https://reviews.facebook.net/D64059
2016-10-14 12:59:51 -07:00
Yi Wu
e29d3b67c2 Make max_background_compactions and base_background_compactions dynamic changeable
Summary:
Add DB::SetDBOptions to dynamic change max_background_compactions and base_background_compactions.
I'll add more dynamic changeable options soon.

Test Plan: unit test.

Reviewers: yhchiang, IslamAbdelRahman, sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D64749
2016-10-14 12:25:39 -07:00
Aaron Gao
21e8daced5 fix assertion failure in Prev()
Summary:
fix assertion failure in db_stress.
It happens because of prefix seek key is larger than merge iterator key when they have the same user key

Test Plan: ./db_stress --max_background_compactions=1 --max_write_buffer_number=3 --sync=0 --reopen=20 --write_buffer_size=33554432 --delpercent=5 --log2_keys_per_lock=10 --block_size=16384 --allow_concurrent_memtable_write=0 --test_batches_snapshots=0 --max_bytes_for_level_base=67108864 --progress_reports=0 --mmap_read=0 --writepercent=35 --disable_data_sync=0 --readpercent=50 --subcompactions=4 --ops_per_thread=20000000 --memtablerep=skip_list --prefix_size=0 --target_file_size_multiplier=1 --column_families=1 --threads=32 --disable_wal=0 --open_files=500000 --destroy_db_initially=0 --target_file_size_base=16777216 --nooverwritepercent=1 --iterpercent=10 --max_key=100000000 --prefixpercent=0 --use_clock_cache=false --kill_random_test=888887 --cache_size=1048576 --verify_checksum=1

Reviewers: sdong, andrewkr, yiwu, yhchiang

Reviewed By: yhchiang

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D65025
2016-10-13 17:36:48 -07:00
Yueh-Hsuan Chiang
040328a30d Remove an assertion for single-delete in MergeHelper::MergeUntil
Summary:
Previously we have an assertion which triggers when we issue Merges
after a single delete.  However, merges after a single delete are
unrelated to that single delete.  Thus this behavior should be
allowed.

This will address a flakyness of db_stress.

Test Plan: db_stress

Reviewers: IslamAbdelRahman, sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D64923
2016-10-13 14:26:57 -07:00
Islam AbdelRahman
f26a139d89 Log successful AddFile
Summary: Log successful AddFile

Test Plan: visually check LOG file

Reviewers: yiwu, andrewkr, lightmark, sdong

Reviewed By: sdong

Subscribers: andrewkr, jkedgar, dhruba

Differential Revision: https://reviews.facebook.net/D65019
2016-10-13 11:56:27 -07:00
Islam AbdelRahman
5691a1d8a4 Fix compaction conflict with running compaction
Summary:
Issue scenario:
(1) We have 3 files in L1 and we issue a compaction that will compact them into 1 file in L2
(2) While compaction (1) is running, we flush a file into L0 and trigger another compaction that decide to move this file to L1 and then move it again to L2 (this file don't overlap with any other files)
(3) compaction (1) finishes and install the file it generated in L2, but this file overlap with the file we generated in (2) so we break the LSM consistency

Looks like this issue can be triggered by using non-exclusive manual compaction or AddFile()

Test Plan: unit tests

Reviewers: sdong

Reviewed By: sdong

Subscribers: hermanlee4, jkedgar, andrewkr, dhruba, yoshinorim

Differential Revision: https://reviews.facebook.net/D64947
2016-10-13 10:49:06 -07:00
Andrew Kryczka
017de666c7 fixup commit
Summary: I accidentally left out these changes from my commit of D64053 due to
messing up the merge conflict resolution.

Test Plan: ./db_wal_test

Reviewers:

Subscribers:

Tasks:

Blame Revision: D64053
2016-10-13 08:48:40 -07:00
Andrew Kryczka
1b7af5fb1a Redo handling of recycled logs in full purge
Summary:
This reverts commit 9e4aa798c3,
which doesn't handle all cases (see inline comment).

I reimplemented the logic as suggested in the initial PR: https://github.com/facebook/rocksdb/pull/1313.

This approach has two benefits:

- All the parsing/filtering of full_scan_candidate_files is kept together in PurgeObsoleteFiles.
- We only need to check whether log file is recycled in one place where we've already determined it's a log file

Test Plan:
new unit test, verified fails before the original fix, still passes
now.

Reviewers: IslamAbdelRahman, yiwu, sdong

Reviewed By: yiwu, sdong

Subscribers: leveldb, dhruba, andrewkr

Differential Revision: https://reviews.facebook.net/D64053
2016-10-12 23:13:09 -07:00
Aaron Gao
447f17127c new Prev() prefix support using SeekForPrev()
Summary:
1) The previous solution for Prev() prefix support is not clean.
Since I add api SeekForPrev(), now the Prev() can be symmetric to Next().
and we do not need SeekToLast() to be called in Prev() any more.

Also, Next() will Seek(prefix_seek_key_) to solve the problem of possible inconsistency between db_iter and merge_iter when
there is merge_operator. And prefix_seek_key is only refreshed when change direction to forward.

2) This diff also solves the bug of Iterator::SeekToLast() with iterate_upper_bound_ with prefix extractor.

add test cases for the above two cases.

There are some tests for the SeekToLast() in Prev(), I will clean them later.

Test Plan: make all check

Reviewers: IslamAbdelRahman, andrewkr, yiwu, sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D63933
2016-10-11 13:54:26 -07:00
Islam AbdelRahman
2ad68b971a Support running consistency checks in release mode
Summary:
We always run consistency checks when compiling in debug mode
allow users to set Options::force_consistency_checks to true to be able to run such checks even when compiling in release mode

Test Plan:
make check -j64
make release

Reviewers: lightmark, sdong, yiwu

Reviewed By: yiwu

Subscribers: hermanlee4, andrewkr, yoshinorim, jkedgar, dhruba

Differential Revision: https://reviews.facebook.net/D64701
2016-10-07 17:21:45 -07:00
Islam AbdelRahman
d062328977 Revert "Support SST files with Global sequence numbers"
This reverts commit ab01da5437.
2016-10-07 14:05:12 -07:00
Reid Horuff
2c1f95291d Add facility to write only a portion of WriteBatch to WAL
Summary:
When constructing a write batch a client may now call MarkWalTerminationPoint() on that batch. No batch operations after this call will be added written to the WAL but will still be inserted into the Memtable. This facility is used to remove one of the three WriteImpl calls in 2PC transactions. This produces a ~1% perf improvement.

```
RocksDB - unoptimized 2pc, sync_binlog=1, disable_2pc=off
INFO 2016-08-31 14:30:38,814 [main]: REQUEST PHASE COMPLETED. 75000000 requests done in 2619 seconds. Requests/second = 28628

RocksDB - optimized 2pc , sync_binlog=1, disable_2pc=off
INFO 2016-08-31 16:26:59,442 [main]: REQUEST PHASE COMPLETED. 75000000 requests done in 2581 seconds. Requests/second = 29054
```

Test Plan: Two unit tests added.

Reviewers: sdong, yiwu, IslamAbdelRahman

Reviewed By: yiwu

Subscribers: hermanlee4, dhruba, andrewkr

Differential Revision: https://reviews.facebook.net/D64599
2016-10-07 11:32:10 -07:00
Islam AbdelRahman
ab01da5437 Support SST files with Global sequence numbers
Summary:
- Update SstFileWriter to include a property for a global sequence number in the SST file `rocksdb.external_sst_file.global_seqno`
- Update TableProperties to be aware of the offset of each property in the file
- Update BlockBasedTableReader and Block to be able to honor the sequence number in `rocksdb.external_sst_file.global_seqno` property and use it to overwrite all sequence number in the file

Something worth mentioning is that we don't update the seqno in the index block since and when doing a binary search, the reason for that is that it's guaranteed that SST files with global seqno will have only one user_key and each key will have seqno=0 encoded in it, This mean that this key is greater than any other key with seqno> 0. That mean that we can actually keep the current logic for these blocks

Test Plan: unit tests

Reviewers: andrewkr, yhchiang, yiwu, sdong

Reviewed By: sdong

Subscribers: hcz, andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D62523
2016-10-03 16:12:39 -07:00
Andrew Kryczka
6009c473c7 Store range tombstones in memtable
Summary:
- Store range tombstones in a separate MemTableRep instantiated with ColumnFamilyOptions::memtable_factory
- MemTable::NewRangeTombstoneIterator() returns a MemTableIterator over the separate MemTableRep
- Part of the read path is not implemented yet (i.e., MemTable::Get())

Test Plan: see unit tests

Reviewers: wanning

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D62217
2016-09-30 09:06:43 -07:00
Aaron Gao
26388247aa delete unused variable for PrevInterval()
Summary: delete unused variable

Test Plan: make check

Reviewers: sdong, andrewkr, IslamAbdelRahman, tianx

Reviewed By: tianx

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D64509
2016-09-29 13:19:58 -07:00
Islam AbdelRahman
87dfc1d23e Fix conflict between AddFile() and CompactRange()
Summary:
Fix the conflict bug between AddFile() and CompactRange() by
- Make sure that no AddFile calls are running when asking CompactionPicker to pick compaction for manual compaction
- If AddFile() run after we pick the compaction for the manual compaction it will be aware of it since we will add the manual compaction to running_compactions_ after picking it

This will solve these 2 scenarios
- If AddFile() is running, we will wait for it to finish before we pick a compaction for the manual compaction
- If we already picked a manual compaction and then AddFile() started ... we ensure that it never ingest a file in a level that will overlap with the manual compaction

Test Plan: unit tests

Reviewers: sdong

Reviewed By: sdong

Subscribers: andrewkr, yoshinorim, jkedgar, dhruba

Differential Revision: https://reviews.facebook.net/D64449
2016-09-28 15:42:06 -07:00
Aaron Gao
f517d9dd09 Add SeekForPrev() to Iterator
Summary:
Add new Iterator API, `SeekForPrev`: find the last key that <= target key
support prefix_extractor
support prefix_same_as_start
support upper_bound
not supported in iterators without Prev()

Also add tests in db_iter_test and db_iterator_test

Pass all tests
Cheers!

Test Plan: make all check -j64

Reviewers: andrewkr, yiwu, IslamAbdelRahman, sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D64149
2016-09-27 18:20:57 -07:00
yiwu-arbug
eb3894cf42 Recompute compaction score on SetOptions (#1346)
Summary: We didn't recompute compaction score on SetOptions, and end up not having compaction if no flush happens afterward. The PR fixing it.

Test Plan: See unit test.

Subscribers: andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D64167
2016-09-27 11:17:15 -07:00
Islam AbdelRahman
5c64fb67d2 Fix AddFile() conflict with compaction output [WaitForAddFile()]
Summary:
Since AddFile unlock/lock the mutex inside LogAndApply() we need to ensure that during this period other compactions cannot run since such compactions are not aware of the file we are ingesting and could create a compaction that overlap wit this file

this diff add
- WaitForAddFile() call that will ensure that no AddFile() calls are being processed right now
- Call `WaitForAddFile()` in 3 locations
-- When doing manual Compaction
-- When starting automatic Compaction
-- When  doing CompactFiles()

Test Plan: unit test

Reviewers: lightmark, yiwu, andrewkr, sdong

Reviewed By: sdong

Subscribers: andrewkr, yoshinorim, jkedgar, dhruba

Differential Revision: https://reviews.facebook.net/D64383
2016-09-27 00:14:55 -07:00
Islam AbdelRahman
9e9f5a0b92 Fix CompactFilesTest.ObsoleteFiles timeout (#1353) 2016-09-26 10:39:07 -07:00
Aaron Gao
c2a62a4cb2 not cut compaction output when compact to level 0
Summary: we should not call ShouldStopBefore() in compaction when the compaction targets level 0. Otherwise, CheckConsistency will fail the assertion of seq number check on level 0.

Test Plan:
make all check -j64
I also manully test that using db_bench to compact files to level 0. Without this line change, the assertion files and multiple files are generated on level 0 after compaction.

Reviewers: yhchiang, andrewkr, yiwu, sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D64269
2016-09-23 17:16:38 -07:00
Yi Wu
9ed928e7a9 Split DBOptions into ImmutableDBOptions and MutableDBOptions
Summary: Use ImmutableDBOptions/MutableDBOptions internally and DBOptions only for user-facing APIs. MutableDBOptions is barely a placeholder for now. I'll start to move options to MutableDBOptions in following diffs.

Test Plan:
  make all check

Reviewers: yhchiang, IslamAbdelRahman, sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D64065
2016-09-23 16:34:04 -07:00
yiwu-arbug
4bc8c88e6b Recover same sequence id from WAL (#1350)
Summary:
Revert the behavior where we don't read sequence id from WAL, but increase it as we replay the log. We still keep the behave for 2PC for now but will fix later.

This change fixes github issue 1339, where some writes come with WAL disabled and we may recover records with wrong sequence id.

Test Plan: Added unit test.

Subscribers: andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D64275
2016-09-23 16:15:14 -07:00
Aaron Gao
0a1bd9c509 add cfh deletion started listener
Summary: add ColumnFamilyHandleDeletionStarted listener which can be called when user deletes handler.

Test Plan: ./listener_test

Reviewers: yiwu, IslamAbdelRahman, sdong, andrewkr

Reviewed By: andrewkr

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D60717
2016-09-22 11:56:18 -07:00
Islam AbdelRahman
da5a9a65c1 Fix mac build 2016-09-21 20:22:09 -07:00
Islam AbdelRahman
abc0ae462b Add AddFile() InternalStats for Total files/L0 files/total keys ingested
Summary:
Report more information about the ingested files in CF InternalStats
- Total files
- Total L0 files
- Total keys

There was also noticed that we were reporting files that failed to ingest, fix this bug

Test Plan: print stats in tests

Reviewers: sdong, andrewkr, lightmark

Reviewed By: lightmark

Subscribers: jkedgar, andrewkr, dhruba, yoshinorim

Differential Revision: https://reviews.facebook.net/D63039
2016-09-21 14:24:08 -07:00
Aaron Gao
715256338a forbid merge during recovery
Summary:
Mitigate regression bug of options.max_successive_merges hit during DB Recovery
For https://reviews.facebook.net/D62625

Test Plan: make all check

Reviewers: horuff, sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D62655
2016-09-21 11:05:07 -07:00
Yi Wu
e4d3f5d9b8 Fix DBImpl::GetWalPreallocateBlockSize Mac build error
Summary: Specify type param with std::min to resolve compile error on Mac.

Test Plan: https://travis-ci.org/facebook/rocksdb/builds/161223845

Reviewers: sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D64143
2016-09-20 10:17:28 -07:00
sdong
d78a4401b5 DBImpl::GetWalPreallocateBlockSize() should return size_t
Summary: WritableFile::SetPreallocationBlockSize() requires parameter as size_t, and options used in DBImpl::GetWalPreallocateBlockSize() are all size_t. WritableFile::SetPreallocationBlockSize() should return size_t to avoid build break if size_t is not uint64_t.

Test Plan: Run existing tests.

Reviewers: andrewkr, IslamAbdelRahman, yiwu

Reviewed By: yiwu

Subscribers: leveldb, andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D64137
2016-09-19 16:51:38 -07:00
sdong
b666f85445 Consider more factors when determining preallocation size of WAL files
Summary: Currently the WAL file preallocation size is 1.1 * write_buffer_size. This, however, will be over-estimated if options.db_write_buffer_size or options.max_total_wal_size is set and is much smaller.

Test Plan: Add a unit test.

Reviewers: andrewkr, yiwu

Reviewed By: yiwu

Subscribers: leveldb, andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D63957
2016-09-19 12:04:35 -07:00
rockeet
4c3f4496b5 Add TableBuilderOptions::level and relevant changes (#1335) 2016-09-17 22:30:43 -07:00
Yi Wu
0a88f38b7e Remove ColumnFamilyData::options()
Summary: One more small refactor before I split DBOptions into mutable and immutable parts.

Test Plan: existing unit tests.

Reviewers: yhchiang, IslamAbdelRahman, sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D64047
2016-09-16 15:09:14 -07:00
Yi Wu
8d9bf5c498 Fix DBOptionsTest.GetLatestOptions
Summary: RandomInitCFOptions will allocate a new compaction filter, which we have to delete afterward.

Test Plan: valgrind against the test

Reviewers: IslamAbdelRahman

Reviewed By: IslamAbdelRahman

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D64011
2016-09-15 14:57:32 -07:00
Yi Wu
40cfa3e021 Fix DBWALTest.RecoveryWithLogDataForSomeCFs with mac
Summary: Seems there's no std::array on mac+clang. Use raw array instead.

Test Plan: run ./db_wal_test on mac.

Reviewers: andrewkr

Reviewed By: andrewkr

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D64005
2016-09-15 13:44:33 -07:00
Andrew Kryczka
06b4785fec Fix recovery for WALs without data for all CFs
Summary:
if one or more CFs had no data in the WAL, the log number that's used
by FindObsoleteFiles() wasn't updated. We need to treat this case the same as
if the data for that WAL had been flushed.

Test Plan: new unit test

Reviewers: IslamAbdelRahman, yiwu, sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D63963
2016-09-15 11:40:48 -07:00
Andrew Kryczka
d7242ff4d5 Fix GetSortedWalFiles when log recycling enabled
Summary:
Previously the sequence number was mistakenly passed in an argument
where the log number should go. This caused the reader to assume the old WAL
format was used, which is incompatible with the WAL recycling format.

Test Plan:
new unit test, verified it fails before this change and passes
afterwards.

Reviewers: yiwu, lightmark, IslamAbdelRahman, sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D63987
2016-09-15 09:55:02 -07:00
Yi Wu
17f76fc564 DB::GetOptions() reflect dynamic changed options
Summary: DB::GetOptions() reflect dynamic changed options.

Test Plan: See the new unit test.

Reviewers: yhchiang, sdong, IslamAbdelRahman

Reviewed By: IslamAbdelRahman

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D63903
2016-09-14 22:10:28 -07:00
Yi Wu
81747f1be6 Refactor MutableCFOptions
Summary:
* Change constructor of MutableCFOptions to depends only on ColumnFamilyOptions.
* Move `max_subcompactions`, `compaction_options_fifo` and `compaction_pri` to ImmutableCFOptions to make it clear that they are immutable.

Test Plan: existing unit tests.

Reviewers: yhchiang, IslamAbdelRahman, sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D63945
2016-09-13 21:11:59 -07:00
somnathr
9e4aa798c3 Summary: (#1313)
If log recycling is enabled with the rocksdb (recycle_log_file_num=16)
 db->Writebatch is erroring out with keynotfound after ~5-6 hours of run
 (1M seq but can happen to any workload I guess).See my detailed bug
 report here (https://github.com/facebook/rocksdb/issues/1303).
 This commit is the fix for this, a check is been added not to delete
 the log file if it is already there in the recycle list.

Test Plan:
 Unit tested it and ran the similar profile. Not reproducing anymore.
2016-09-12 16:53:42 -07:00
Adam Faulkner
a10e8a056d Fix C api memtable rep bugs. (#1328) 2016-09-12 15:31:42 -07:00
zhangjinpeng1987
b06b191362 add C api for set wal_recovery_mode (#1327)
* add C api for set wal recovery mode

* add test
2016-09-09 10:11:30 -07:00
Islam AbdelRahman
1cca091298 Temporarily revert Prev() prefix support
Summary:
Temporarily revert commits for supporting prefix Prev() to unblock MyRocks and RocksDB release

These are the commits reverted

  - 6a14d55bd9
  - b18f9c9eac
  - db74b1a219
  - 2482d5fb45

Test Plan: make check -j64

Reviewers: sdong, lightmark

Reviewed By: lightmark

Subscribers: andrewkr, dhruba, yoshinorim

Differential Revision: https://reviews.facebook.net/D63789
2016-09-08 14:45:32 -07:00
Islam AbdelRahman
52ee07b021 Move AddFile() tests to external_sst_file_test.cc
Summary: Simply move the tests

Test Plan: make check -j64

Reviewers: andrewkr, lightmark, yiwu, yhchiang, kradhakrishnan, sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D62529
2016-09-07 15:41:54 -07:00
Edouard A
66a91e2607 Add NoSpace subcode to IOError (#1320)
Add a sub code to distinguish "out of space" errors from regular I/O errors
2016-09-07 12:37:45 -07:00
sdong
67036c0406 Fix Flaky ColumnFamilyTest.FlushCloseWALFiles
Summary: In ColumnFamilyTest.FlushCloseWALFiles, there is a small window in which the flush has finished but the log writer is not yet closed, causing the assert failure. Fix it by explicitly waiting the flush job to finish.

Test Plan: Run the test many times in high parallelism.

Subscribers: leveldb, andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D63423
2016-09-07 11:19:15 -07:00
sdong
607628d349 Support ZSTD with finalized format
Summary:
ZSTD 1.0.0 is coming. We can finally add a support of ZSTD without worrying about compatibility.
Still keep ZSTDNotFinal for compatibility reason.

Test Plan: Run all tests. Run db_bench with ZSTD version with RocksDB built with ZSTD 1.0 and older.

Reviewers: andrewkr, IslamAbdelRahman

Reviewed By: IslamAbdelRahman

Subscribers: cyan, igor, IslamAbdelRahman, leveldb, andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D63141
2016-09-06 12:22:16 -07:00
Injun Song
ce1be2ce37 Fix build error on Windows (AppVeyor) (#1315)
Add 'cf_options' to source list and db_imple.cc

fix casting
2016-09-06 08:41:43 -07:00
sdong
22696b0881 Fix uninitlized CompactionJob::SubcompactionState::current_output_file_size
Summary: The new variable introduced in 2149059f910149197d1a0f79ac08cf19465ea2d may be unitialized. Valgrind is failing because of it.

Test Plan: Run valgrind tests

Reviewers: yiwu, andrewkr, IslamAbdelRahman

Reviewed By: IslamAbdelRahman

Subscribers: leveldb, andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D63201
2016-09-02 17:06:20 -07:00
Yi Wu
a88677d2cf Remove ImmutableCFOptions from public API
Summary: There's no reference to ImmutableCFOptions elsewhere in /include/rocksdb. ImmutableCFOptions was introduced in this commit (5665e5e285) but later its reference in /include/rocksdb/table.h is removed.

Test Plan:
  make all check

Reviewers: IslamAbdelRahman, sdong, yhchiang

Reviewed By: yhchiang

Subscribers: yhchiang, andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D63177
2016-09-02 14:16:31 -07:00
Islam AbdelRahman
80c75593ed Fix data race in AddFile() with multiple files + custom comparator bug
Summary:
When ingesting multiple files
- We should use user comparator
- Should not call `cfd->current()` outside of mutex

Test Plan: unit tests

Reviewers: sdong, lightmark

Reviewed By: lightmark

Subscribers: andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D63075
2016-09-02 11:17:58 -07:00
John Alexander
4fd08f4b8b Ensure Correct Behavior of StatsLevel kExceptDetailedTimers and kExceptTimeForMutex (#1308)
* Fix StatsLevel so that kExceptTimeForMutex leaves compression stats enabled and kExceptDetailedTimers disables mutex lock stats. Also change default stats level to kExceptDetailedTimers (disabling both compression and mutex timing).

* Changed order of StatsLevel enum to simplify logic for determining what stats to record.
2016-09-01 19:57:55 -07:00
sdong
32149059f9 Merge options source_compaction_factor, max_grandparent_overlap_bytes and expanded_compaction_factor into max_compaction_bytes
Summary: To reduce number of options, merge source_compaction_factor, max_grandparent_overlap_bytes and expanded_compaction_factor into max_compaction_bytes.

Test Plan: Add two new unit tests. Run all existing tests, including jtest.

Reviewers: yhchiang, igor, IslamAbdelRahman

Reviewed By: IslamAbdelRahman

Subscribers: leveldb, andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D59829
2016-09-01 14:33:24 -07:00
Aaron Gao
6a14d55bd9 add prefix_seek_mode to db_iter_test
Summary: add prefix_seek_mode to db_iter_test to enable data race test for iterator when prefix_extractor != nullptr

Test Plan: make all check -j64

Reviewers: andrewkr, IslamAbdelRahman, sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D63027
2016-08-31 12:07:09 -07:00
Aaron Gao
2482d5fb45 support Prev() in prefix seek mode
Summary: As title, make sure Prev() works as expected with Next() when the current iter->key() in the range of the same prefix in prefix seek mode

Test Plan: make all check -j64 (add prefix_test with PrefixSeekModePrev test case)

Reviewers: andrewkr, sdong, IslamAbdelRahman

Reviewed By: IslamAbdelRahman

Subscribers: yoshinorim, andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D61419
2016-08-29 20:55:39 -07:00
Islam AbdelRahman
b49b92cf28 Introduce Read amplification bitmap (read amp statistics)
Summary:
Add ReadOptions::read_amp_bytes_per_bit option which allow us to create a bitmap for every data block we read
the bitmap will contain (block_size / read_amp_bytes_per_bit) bits.

We will use this bitmap to mark which bytes have been used of the block so we can calculate the read amplification

Test Plan: added new tests

Reviewers: andrewkr, yhchiang, sdong

Reviewed By: sdong

Subscribers: yiwu, leveldb, march, andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D58707
2016-08-26 18:55:58 -07:00
sdong
dade61ac26 Mitigate regression bug of options.max_successive_merges hit during DB Recovery
Summary:
After 1b8a2e8fdd, DB Pointer is passed to WriteBatchInternal::InsertInto() while DB recovery. This can cause deadlock if options.max_successive_merges hits. In that case DB::Get() will be called. Get() will try to acquire the DB mutex, which is already held by the DB::Open(), causing a deadlock condition.

This commit mitigates the problem by not passing the DB pointer unless 2PC is allowed.

Test Plan: Add a new test and run it.

Reviewers: IslamAbdelRahman, andrewkr, kradhakrishnan, horuff

Reviewed By: kradhakrishnan

Subscribers: leveldb, andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D62625
2016-08-25 17:30:34 -07:00
Justin Gibbs
b2ce59537c Persist data during user initiated shutdown
Summary:
Move the manual memtable flush for databases containing data that has
bypassed the WAL from DBImpl's destructor to CancleAllBackgroundWork().

CancelAllBackgroundWork() is a publicly exposed API which allows
async operations performed by background threads to be disabled on a
database. In effect, this places the database into a "shutdown" state
in advance of calling the database object's destructor. No compactions
or flushing of SST files can occur once a call to this API completes.

When writes are issued to a database with WriteOptions::disableWAL
set to true, DBImpl::has_unpersisted_data_ is set so that
memtables can be flushed when the database object is destroyed. If
CancelAllBackgroundWork() has been called prior to DBImpl's destructor,
this flush operation is not possible and is skipped, causing unnecessary
loss of data.

Since CancelAllBackgroundWork() is already invoked by DBImpl's destructor
in order to perform the thread join portion of its cleanup processing,
moving the manual memtable flush to CancelAllBackgroundWork() ensures
data is persisted regardless of client behavior.

Test Plan:
Write an amount of data that will not cause a memtable flush to a rocksdb
database with all writes marked with WriteOptions::disableWAL. Properly
"close" the database. Reopen database and verify that the data was
persisted.

Reviewers: IslamAbdelRahman, yiwu, yoshinorim, sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D62277
2016-08-25 12:24:22 -07:00
Mike Kolupaev
7b81095171 Fix a crash when compaction fails to open a file
Summary:
We've got a crash with this stack trace:

  Program terminated with signal SIGTRAP, Trace/breakpoint trap.

  #0  0x00007fc85f2f4009 in raise () from /usr/local/fbcode/gcc-4.9-glibc-2.20-fb/lib/libpthread.so.0
  #1  0x00000000005c8f61 in facebook::logdevice::handle_sigsegv(int) () at logdevice/server/sigsegv.cpp:159
  #2  0x00007fc85f2f4150 in <signal handler called> () at /usr/local/fbcode/gcc-4.9-glibc-2.20-fb/lib/libpthread.so.0
  #3  0x00000000031ed80c in rocksdb::NewReadaheadRandomAccessFile() at util/file_reader_writer.cc:383
  #4  0x00000000031ed80c in rocksdb::NewReadaheadRandomAccessFile() at util/file_reader_writer.cc:472
  #5  0x00000000031558e7 in rocksdb::TableCache::GetTableReader() at db/table_cache.cc:99
  #6  0x0000000003156329 in rocksdb::TableCache::NewIterator() at db/table_cache.cc:198
  #7  0x0000000003166568 in rocksdb::VersionSet::MakeInputIterator() at db/version_set.cc:3345
  #8  0x000000000324a94f in rocksdb::CompactionJob::ProcessKeyValueCompaction(rocksdb::CompactionJob::SubcompactionState*) () at db/compaction_job.cc:650
  #9  0x000000000324c2f6 in rocksdb::CompactionJob::Run() () at db/compaction_job.cc:530
  #10 0x00000000030f5ae5 in rocksdb::DBImpl::BackgroundCompaction() at db/db_impl.cc:3269
  #11 0x0000000003108d36 in rocksdb::DBImpl::BackgroundCallCompaction(void*) () at db/db_impl.cc:2970
  #12 0x00000000029a2a9a in facebook::logdevice::RocksDBEnv::callback(void*) () at logdevice/server/locallogstore/RocksDBEnv.cpp:26
  #13 0x00000000029a2a9a in facebook::logdevice::RocksDBEnv::callback(void*) () at logdevice/server/locallogstore/RocksDBEnv.cpp:30
  #14 0x00000000031e7521 in rocksdb::ThreadPool::BGThread() at util/threadpool.cc:230
  #15 0x00000000031e7663 in rocksdb::BGThreadWrapper(void*) () at util/threadpool.cc:254
  #16 0x00007fc85f2ea7f1 in start_thread () at /usr/local/fbcode/gcc-4.9-glibc-2.20-fb/lib/libpthread.so.0
  #17 0x00007fc85e8fb46d in clone () at /usr/local/fbcode/gcc-4.9-glibc-2.20-fb/lib/libc.so.6

From looking at the code, probably what happened is this:
 - `TableCache::GetTableReader()` called `Env::NewRandomAccessFile()`, which dispatched to a `PosixEnv::NewRandomAccessFile()`, where probably an `open()` call failed, so the `NewRandomAccessFile()` left a nullptr in the resulting file,
 - `TableCache::GetTableReader()` called `NewReadaheadRandomAccessFile()` with that `nullptr` file,
 - it tried to call file's method and crashed.

This diff is a trivial fix to this crash.

Test Plan: `make -j check`

Reviewers: sdong, andrewkr, IslamAbdelRahman

Reviewed By: IslamAbdelRahman

Subscribers: andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D62451
2016-08-25 04:39:26 -07:00
Islam AbdelRahman
2a9c97108e [Flaky Test] Disable DBPropertiesTest.GetProperty
Summary: Disable flaky test

Test Plan: run it

Reviewers: yiwu, andrewkr, kradhakrishnan, yhchiang, lightmark, sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D62487
2016-08-24 15:32:01 -07:00
Yi Wu
badbff65b7 Not insert into block cache if cache is full and not holding handle
Summary:
We used to allow insert into full block cache as long as `strict_capacity_limit=false`. This diff further restrict insert to full cache if caller don't intent to hold handle to the cache entry after insert.

Hope this diff fix the assertion failure with db_stress: https://our.intern.facebook.com/intern/sandcastle/log/?instance_id=211853102&step_id=2475070014

  db_stress: util/lru_cache.cc:278: virtual void rocksdb::LRUCacheShard::Release(rocksdb::Cache::Handle*): Assertion `lru_.next == &lru_' failed.

The assertion at lru_cache.cc:278 can fail when an entry is inserted into full cache and stay in LRU list.

Test Plan:
  make all check

Reviewers: IslamAbdelRahman, lightmark, sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D62325
2016-08-23 13:53:49 -07:00
Yi Wu
4a16c32ece Option to cache index/filter blocks with priority
Summary:
Add option to block based table to insert index/filter blocks to block cache with priority. Combined with LRUCache with high_pri_pool_ratio, we can reserved space for index/filter blocks, make them less likely to be evicted.

Depends on D61977.

Test Plan: See unit test.

Reviewers: lightmark, IslamAbdelRahman, sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba, march, leveldb

Differential Revision: https://reviews.facebook.net/D62241
2016-08-23 13:44:13 -07:00
Islam AbdelRahman
6a17b07ca8 Add TablePropertiesCollector support in SstFileWriter
Summary: Update SstFileWriter to use user TablePropertiesCollectors that are passed in Options

Test Plan: unittests

Reviewers: sdong

Reviewed By: sdong

Subscribers: jkedgar, andrewkr, hermanlee4, dhruba, yoshinorim

Differential Revision: https://reviews.facebook.net/D62253
2016-08-19 16:17:56 -07:00
Wanning Jiang
78837f5d61 TableBuilder / TableReader support for range deletion
Summary: 1. Range Deletion Tombstone structure 2. Modify Add() in table_builder to make it usable for adding range del tombstones 3. Expose NewTombstoneIterator() API in table_reader

Test Plan: table_test.cc (now BlockBasedTableBuilder::Add() only accepts InternalKey. I make table_test only pass InternalKey to BlockBasedTableBuidler. Also test writing/reading range deletion tombstones in table_test )

Reviewers: sdong, IslamAbdelRahman, lightmark, andrewkr

Reviewed By: andrewkr

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D61473
2016-08-19 15:10:31 -07:00
Jay
49d88be021 c abi: allow compaction filter ignore snapshot (#1268)
close #1262
2016-08-17 18:48:43 -07:00
Anirban Rahut
2fc2fd92a9 Single Delete Mismatch and Fallthrough statistics
Summary:
Added 2 statistics in compaction job statistics, to
identify if single deletes are not meeting a matching key
(fallthrough) or single deletes are meeting a merge, delete or
another single delete (i.e. not the expected case of put).

Test Plan: Tested the statistics using write_stress and compaction_job_stats_test

Reviewers: sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D61749
2016-08-16 08:21:43 -07:00
Andrew Kryczka
3771e37970 WriteBatch support for range deletion
Summary:
Add API to WriteBatch to store range deletions in its buffer
which are later added to memtable. In the WriteBatch buffer, a range
deletion is encoded as "<optype><CF ID (optional)><begin key><end key>".

With this diff, the range tombstones are stored inline with the data in
the memtable. It's useful for now because the test cases rely on the
data being accessible via memtable. My next step is to store range
tombstones in a separate area in the memtable.

Test Plan: unit tests

Reviewers: IslamAbdelRahman, sdong, wanning

Reviewed By: wanning

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D61401
2016-08-16 08:16:04 -07:00
Islam AbdelRahman
64a0082c69 Fix DBSSTest::AddExternalSstFileSkipSnapshot valgrind fail
Summary: Fix the test by releasing the last snapshot

Test Plan: run the test under valgrind

Reviewers: andrewkr, yiwu, lightmark, sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D62091
2016-08-15 14:04:40 -07:00
sdong
6525ce4caf Compaction stats printing: "batch" => "commit group"
Summary: "Batch" is ambiguous in this context. It can mean "write batch" or commit group. Change it to commit group to be clear.

Test Plan: Build

Reviewers: MarkCallaghan, yhchiang, IslamAbdelRahman

Reviewed By: IslamAbdelRahman

Subscribers: leveldb, andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D62055
2016-08-15 10:47:29 -07:00
Islam AbdelRahman
a297643f2e Fix valgrind memory leak 2016-08-11 23:34:19 -07:00
Islam AbdelRahman
d11c09d9e2 Eliminate memcpy from ForwardIterator
Summary:
This diff update ForwardIterator to support pinning keys and values, which will allow DBIter to take advantage of that and eliminate memcpy when executing merge operators
This diff is stacked on D61305

Test Plan:
existing tests (updated them to test tailing iterator)
new test

Reviewers: andrewkr, yhchiang, sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D60009
2016-08-11 19:10:16 -07:00
Islam AbdelRahman
b693ba68b5 Minor PinnedIteratorsManager Refactoring
Summary:
This diff include these simple change
- Rename ReleasePinnedIterators to ReleasePinnedData
- Rename PinIteratorIfNeeded to PinIterator
- Use std::vector directly in PinnedIteratorsManager instead of std::unique_ptr<std::vector>
- Generalize PinnedIteratorsManager by adding PinPtr which can pin any pointer

Test Plan: existing tests

Reviewers: sdong, yiwu, andrewkr

Reviewed By: andrewkr

Subscribers: andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D61305
2016-08-11 11:54:17 -07:00
sdong
4beffe001d Fix test data race in two FaultInjectionTest tests
Summary: Background sleeping tasks may conflict with test cleaning up. Wait for the sleeping tasks to finish before ending the test.

Test Plan: Run these tests.

Reviewers: andrewkr, yiwu

Reviewed By: yiwu

Subscribers: leveldb, andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D61827
2016-08-10 13:56:50 -07:00
sdong
56dd034115 read_options.background_purge_on_iterator_cleanup to cover forward iterator and log file closing too.
Summary: With read_options.background_purge_on_iterator_cleanup=true, File deletion and closing can still happen in forward iterator, or WAL file closing. Cover those cases too.

Test Plan: I am adding unit tests.

Reviewers: andrewkr, IslamAbdelRahman, yiwu

Reviewed By: yiwu

Subscribers: leveldb, andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D61503
2016-08-10 13:16:41 -07:00
Islam AbdelRahman
ccecf3f4fb UniversalCompaction should ignore sorted runs being compacted (when compacting for file num)
Summary:
If we have total number of sorted runs greater than level0_file_num_compaction_trigger, Universal compaction will always issue a compaction
even if the number of sorted runs that are not being compacted is less than level0_file_num_compaction_trigger.

This diff changes this behaviour to relay on the `number of sorted runs not being compacted` instead of `total number of sorted runs`

Test Plan: New unit test

Reviewers: sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D61533
2016-08-10 12:37:43 -07:00
Zongzhi Chen
98d0b78eac Added check_snapshot option in the DB's AddFile function (#1261)
* Added check_snapshot option in the DB's AddFile function

* change check_snapshot to skip_snapshot_check

* add unit test for skip_snapshot_check

* Add skip_snapshot_check comment
2016-08-09 18:14:13 -07:00
Yi Wu
7882cb9773 Make DBOptionsTest::EnableAutoCompactionAndTriggerStall less falky
Summary: Explicitly flush two times to generate two sst files.

Test Plan: run the test.

Reviewers: sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D61671
2016-08-05 16:45:57 -07:00
omegaga
c3a4bea5dc Fix flaky test ObsoleteFiles
Summary: The test `ObsoleteFiles` failed occasionally on slow device. This problem appears on Travis CI several times. The reason is that we did not wait until compaction jobs are finished in the test, while in slower device the background jobs take longer time to finish.

Test Plan: Pass existing tests.

Reviewers: yiwu, sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D61479
2016-08-03 15:19:35 -07:00
Yi Wu
ee027fc19f Ignore write stall triggers when auto-compaction is disabled
Summary:
My understanding is that the purpose of write stall triggers are to wait for auto-compaction to catch up. Without auto-compaction, we don't need to stall writes.

Also with this diff, flush/compaction conditions are recalculated on dynamic option change. Previously the conditions are recalculate only when write stall options are changed.

Test Plan: See the new test. Removed two tests that are no longer valid.

Reviewers: IslamAbdelRahman, sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D61437
2016-08-02 21:55:26 -07:00
Aaron Gao
343304e1d3 Use StopWatch to do statistic job in db_impl_add_file.cc
Summary:
patch for diff https://reviews.facebook.net/D58587
Also change StopWatch class to add a fifth param named overwrite which decides whether to overwrite *elapse or add on it.

Test Plan: make all check -j64

Reviewers: sdong, IslamAbdelRahman

Reviewed By: IslamAbdelRahman

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D61239
2016-08-02 14:53:29 -07:00
Jay Edgar
cdc4eb6892 Add a GetComparator() function to the ColumnFamilyHandle base class so that the user's comparator can be retrieved.
Summary: MyRocks is adding support for the user of the SstFileWriter which needs a comparator.  It would be more convenient to get the comparator from the column family (which already has to have it) than to have caller keep track of it.

Test Plan: Standard tests (adding one for the new method)

Reviewers: IslamAbdelRahman, sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D61155
2016-08-02 14:34:57 -07:00
Islam AbdelRahman
5e2c796589 Make DBTest.CompressionStatsTest more deterministic
Summary:
DBTest.CompressionStatsTest on non_shm test where the storage device is slow

DBTest.CompressionStatsTest assumes that a flush happens to check the number of compressed blocks.
This is not always true if the Flush is slow, make the test more deterministic by forcing a flush before doing the check

Test Plan: Run the test locally

Reviewers: andrewkr, yiwu, lightmark, sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D61317
2016-07-29 11:42:28 -07:00
Aaron Gao
e72ea485ed add InDomain regression test
Summary: regression tests to make sure seek keys not in domain would not fail assertion

Test Plan:
```
[gzh@dev6163.prn2 ~/local/rocksdb] ./prefix_test --gtest_filter=SamePrefixTest.*
/tmp/rocksdbtest-112628/prefix_test
Note: Google Test filter = SamePrefixTest.*
[==========] Running 1 test from 1 test case.
[----------] Global test environment set-up.
[----------] 1 test from SamePrefixTest
[ RUN      ] SamePrefixTest.InDomainTest
[       OK ] SamePrefixTest.InDomainTest (211 ms)
[----------] 1 test from SamePrefixTest (211 ms total)

[----------] Global test environment tear-down
[==========] 1 test from 1 test case ran. (211 ms total)
```

Reviewers: andrewkr, sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D61161
2016-07-27 18:45:53 -07:00
sdong
e5b5f12b81 Change options memtable_prefix_bloom_huge_page_tlb_size => memtable_huge_page_size and cover huge page to memtable too
Summary: Extend the option memtable_prefix_bloom_huge_page_tlb_size from just putting memtable bloom filter to huge page to memtable itself too.

Test Plan: Run all existing tests.

Reviewers: IslamAbdelRahman, yhchiang, andrewkr

Reviewed By: andrewkr

Subscribers: leveldb, andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D60513
2016-07-26 18:15:11 -07:00
sdong
0ce258f9b3 Compaction picker to expand output level files for keys cross files' boundary too.
Summary: We may wrongly drop delete operation if we pick a file with the entry to be delete, the put entry of the same user key is in the next file in the level, and the next file is not picked. We expand compaction inputs for output level too.

Test Plan: Add unit tests that reproduct the bug of dropping delete entry. Change compaction_picker_test to assert the new behavior.

Reviewers: IslamAbdelRahman, igor

Reviewed By: igor

Subscribers: leveldb, andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D61173
2016-07-26 17:56:36 -07:00
Wanning Jiang
e12270dfee fix previous typo
Summary: old typos with FILTER/INDEX_CACHE

Test Plan: still pass this unit test

Reviewers: andrewkr

Reviewed By: andrewkr

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D61185
2016-07-26 11:15:14 -07:00
Islam AbdelRahman
16e225f70d Fix MergeContext::copied_operands_ strings moving
Summary:
MergeContext::copied_operands contain strings that MergeContext::operand_list_ Slices point to
It's possible that when MergeContext::copied_operands grow, these strings are moved and there place in memory is changed, this will cause MergeContext::operand_list_ to point to invalid memory.
fix this problem by using unique_ptr<string> instead of string

Test Plan: run tests under mac/clang

Reviewers: sdong, yiwu

Reviewed By: yiwu

Subscribers: andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D61023
2016-07-25 15:31:41 -07:00
Yi Wu
ae0ad719de Fix flaky DBSSTTEST::DeleteObsoleteFilesPendingOutputs
Summary: The test is flaky on Travis in osx environment. The background flush the test wanting to block can run behind the L2 manual compaction, making the test actually blocking the L2 compaction and won't able to proceed.

Test Plan: Test run on travis

Reviewers: kradhakrishnan, sdong, andrewkr, IslamAbdelRahman

Reviewed By: IslamAbdelRahman

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D61101
2016-07-25 15:09:34 -07:00
Yi Wu
c6654588bd Disable two dynamic options tests under lite build
Summary: RocksDB lite don't support dynamic options. Disable the two test from lite build, and assert `SetOptions` should return `status::OK`.

Test Plan: Run the db_options test under lite build and normal build.

Reviewers: sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D61119
2016-07-25 11:48:17 -07:00
sdong
2a6d0cde72 Ignore stale logs while restarting DBs
Summary:
Stale log files can be deleted out of order. This can happen for various reasons. One of the reason is that no data is ever inserted to a column family and we have an optimization to update its log number, but not all the old log files are cleaned up (the case shown in the unit tests added). It can also happen when we simply delete multiple log files out of order.

This causes data corruption because we simply increase seqID after processing the next row and we may end up with writing data with smaller seqID than what is already flushed to memtables.

In DB recovery, for the oldest files we are replaying, if there it contains no data for any column family, we ignore the sequence IDs in the file.

Test Plan: Add two unit tests that fail without the fix.

Reviewers: IslamAbdelRahman, igor, yiwu

Reviewed By: yiwu

Subscribers: hermanlee4, yoshinorim, leveldb, andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D60891
2016-07-25 11:47:31 -07:00
sdong
d5a51d4de3 Need to make sure log file synced before flushing memtable of one column family
Summary: Multiput atomiciy is broken across multiple column families if we don't sync WAL before flushing one column family. The WAL file may contain a write batch containing writes to a key to the CF to be flushed and a key to other CF. If we don't sync WAL before flushing, if machine crashes after flushing, the write batch will only be partial recovered. Data to other CFs are lost.

Test Plan: Add a new unit test which will fail without the diff.

Reviewers: yhchiang, IslamAbdelRahman, igor, yiwu

Reviewed By: yiwu

Subscribers: yiwu, leveldb, andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D60915
2016-07-21 16:29:06 -07:00
Yi Wu
89f319c2df Fix unit test which breaks lite build
Summary: Comment out assertion of number of table files from lite build.

Test Plan:
    OPT=-DROCKSDB_LITE make check

Reviewers: lightmark

Reviewed By: lightmark

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D60999
2016-07-21 14:32:12 -07:00
Yi Wu
32604e6601 Fix flush not being commit while writing manifest
Summary:
Fix flush not being commit while writing manifest, which is a recent bug introduced by D60075.

The issue:
# Options.max_background_flushes > 1
# Background thread A pick up a flush job, flush, then commit to manifest. (Note that mutex is released before writing manifest.)
# Background thread B pick up another flush job, flush. When it gets to `MemTableList::InstallMemtableFlushResults`, it notices another thread is commiting, so it quit.
# After the first commit, thread A doesn't double check if there are more flush result need to commit, leaving the second flush uncommitted.

Test Plan: run the test. Also verify the new test hit deadlock without the fix.

Reviewers: sdong, igor, lightmark

Reviewed By: lightmark

Subscribers: andrewkr, omegaga, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D60969
2016-07-21 10:10:41 -07:00
John Alexander
9ab38c45ad Remove %z Format Specifier and Fix Windows Build of sim_cache.cc (#1224)
* Replace %zu format specifier with Windows-compatible macro 'ROCKSDB_PRIszt'

* Added "port/port.h" include to sim_cache.cc for call to snprintf().

* Applied cleaner fix to windows build, reverting part of 7bedd94
2016-07-20 15:28:04 -07:00
omegaga
e70020e4f6 Only cache level 0 indexes and filter when opening table reader
Summary: In T8216281 we decided to disable prefetching the index and filter during opening table handlers during startup (max_open_files = -1).

Test Plan: Rely on `IndexAndFilterBlocksOfNewTableAddedToCache` to guarantee L0 indexes and filters are still cached and change `PinL0IndexAndFilterBlocksTest` to make sure other levels are not cached (maybe add one more test to test we don't cache other levels?)

Reviewers: sdong, andrewkr

Reviewed By: andrewkr

Subscribers: andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D59913
2016-07-20 11:23:31 -07:00
Islam AbdelRahman
68a8e6b8fa Introduce FullMergeV2 (eliminate memcpy from merge operators)
Summary:
This diff update the code to pin the merge operator operands while the merge operation is done, so that we can eliminate the memcpy cost, to do that we need a new public API for FullMerge that replace the std::deque<std::string> with std::vector<Slice>

This diff is stacked on top of D56493 and D56511

In this diff we
- Update FullMergeV2 arguments to be encapsulated in MergeOperationInput and MergeOperationOutput which will make it easier to add new arguments in the future
- Replace std::deque<std::string> with std::vector<Slice> to pass operands
- Replace MergeContext std::deque with std::vector (based on a simple benchmark I ran https://gist.github.com/IslamAbdelRahman/78fc86c9ab9f52b1df791e58943fb187)
- Allow FullMergeV2 output to be an existing operand

```
[Everything in Memtable | 10K operands | 10 KB each | 1 operand per key]

DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="mergerandom,readseq,readseq,readseq,readseq,readseq" --merge_operator="max" --merge_keys=10000 --num=10000 --disable_auto_compactions --value_size=10240 --write_buffer_size=1000000000

[FullMergeV2]
readseq      :       0.607 micros/op 1648235 ops/sec; 16121.2 MB/s
readseq      :       0.478 micros/op 2091546 ops/sec; 20457.2 MB/s
readseq      :       0.252 micros/op 3972081 ops/sec; 38850.5 MB/s
readseq      :       0.237 micros/op 4218328 ops/sec; 41259.0 MB/s
readseq      :       0.247 micros/op 4043927 ops/sec; 39553.2 MB/s

[master]
readseq      :       3.935 micros/op 254140 ops/sec; 2485.7 MB/s
readseq      :       3.722 micros/op 268657 ops/sec; 2627.7 MB/s
readseq      :       3.149 micros/op 317605 ops/sec; 3106.5 MB/s
readseq      :       3.125 micros/op 320024 ops/sec; 3130.1 MB/s
readseq      :       4.075 micros/op 245374 ops/sec; 2400.0 MB/s
```

```
[Everything in Memtable | 10K operands | 10 KB each | 10 operand per key]

DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="mergerandom,readseq,readseq,readseq,readseq,readseq" --merge_operator="max" --merge_keys=1000 --num=10000 --disable_auto_compactions --value_size=10240 --write_buffer_size=1000000000

[FullMergeV2]
readseq      :       3.472 micros/op 288018 ops/sec; 2817.1 MB/s
readseq      :       2.304 micros/op 434027 ops/sec; 4245.2 MB/s
readseq      :       1.163 micros/op 859845 ops/sec; 8410.0 MB/s
readseq      :       1.192 micros/op 838926 ops/sec; 8205.4 MB/s
readseq      :       1.250 micros/op 800000 ops/sec; 7824.7 MB/s

[master]
readseq      :      24.025 micros/op 41623 ops/sec;  407.1 MB/s
readseq      :      18.489 micros/op 54086 ops/sec;  529.0 MB/s
readseq      :      18.693 micros/op 53495 ops/sec;  523.2 MB/s
readseq      :      23.621 micros/op 42335 ops/sec;  414.1 MB/s
readseq      :      18.775 micros/op 53262 ops/sec;  521.0 MB/s

```

```
[Everything in Block cache | 10K operands | 10 KB each | 1 operand per key]

[FullMergeV2]
$ DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="readseq,readseq,readseq,readseq,readseq" --merge_operator="max" --num=100000 --db="/dev/shm/merge-random-10K-10KB" --cache_size=1000000000 --use_existing_db --disable_auto_compactions
readseq      :      14.741 micros/op 67837 ops/sec;  663.5 MB/s
readseq      :       1.029 micros/op 971446 ops/sec; 9501.6 MB/s
readseq      :       0.974 micros/op 1026229 ops/sec; 10037.4 MB/s
readseq      :       0.965 micros/op 1036080 ops/sec; 10133.8 MB/s
readseq      :       0.943 micros/op 1060657 ops/sec; 10374.2 MB/s

[master]
readseq      :      16.735 micros/op 59755 ops/sec;  584.5 MB/s
readseq      :       3.029 micros/op 330151 ops/sec; 3229.2 MB/s
readseq      :       3.136 micros/op 318883 ops/sec; 3119.0 MB/s
readseq      :       3.065 micros/op 326245 ops/sec; 3191.0 MB/s
readseq      :       3.014 micros/op 331813 ops/sec; 3245.4 MB/s
```

```
[Everything in Block cache | 10K operands | 10 KB each | 10 operand per key]

DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="readseq,readseq,readseq,readseq,readseq" --merge_operator="max" --num=100000 --db="/dev/shm/merge-random-10-operands-10K-10KB" --cache_size=1000000000 --use_existing_db --disable_auto_compactions

[FullMergeV2]
readseq      :      24.325 micros/op 41109 ops/sec;  402.1 MB/s
readseq      :       1.470 micros/op 680272 ops/sec; 6653.7 MB/s
readseq      :       1.231 micros/op 812347 ops/sec; 7945.5 MB/s
readseq      :       1.091 micros/op 916590 ops/sec; 8965.1 MB/s
readseq      :       1.109 micros/op 901713 ops/sec; 8819.6 MB/s

[master]
readseq      :      27.257 micros/op 36687 ops/sec;  358.8 MB/s
readseq      :       4.443 micros/op 225073 ops/sec; 2201.4 MB/s
readseq      :       5.830 micros/op 171526 ops/sec; 1677.7 MB/s
readseq      :       4.173 micros/op 239635 ops/sec; 2343.8 MB/s
readseq      :       4.150 micros/op 240963 ops/sec; 2356.8 MB/s
```

Test Plan: COMPILE_WITH_ASAN=1 make check -j64

Reviewers: yhchiang, andrewkr, sdong

Reviewed By: sdong

Subscribers: lovro, andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D57075
2016-07-20 09:49:03 -07:00
sdong
e70ba4e40e MemTable::PostProcess() can skip updating num_deletes if the delta is 0
Summary: In many use cases there is no deletes. No need to pay the overhead of atomically updating num_deletes.

Test Plan: Run existing test.

Reviewers: ngbronson, yiwu, andrewkr, igor

Reviewed By: andrewkr

Subscribers: leveldb, andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D60555
2016-07-19 18:10:18 -07:00
sdong
2a282e5f54 DBTablePropertiesTest.GetPropertiesOfTablesInRange: Fix Flaky
Summary:
Summary
There is a possibility that there is no L0 file after writing the data. Generate an L0 file to make it work.

Test Plan: Run the test many times.

Reviewers: andrewkr, yiwu

Reviewed By: yiwu

Subscribers: leveldb, andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D60825
2016-07-19 15:46:20 -07:00
John Alexander
9430333f84 New Statistics to track Compression/Decompression (#1197)
* Added new statistics and refactored to allow ioptions to be passed around as required to access environment and statistics pointers (and, as a convenient side effect, info_log pointer).

* Prevent incrementing compression counter when compression is turned off in options.

* Prevent incrementing compression counter when compression is turned off in options.

* Added two more supported compression types to test code in db_test.cc

* Prevent incrementing compression counter when compression is turned off in options.

* Added new StatsLevel that excludes compression timing.

* Fixed casting error in coding.h

* Fixed CompressionStatsTest for new StatsLevel.

* Removed unused variable that was breaking the Linux build
2016-07-19 09:44:03 -07:00
sdong
21c55bdb6e DBTest.DynamicLevelCompressionPerLevel: Tune Threshold
Summary: Each SST's file size increases after we add more table properties. Threshold in DBTest.DynamicLevelCompressionPerLevel need to adjust accordingly to avoid occasional failures.

Test Plan: Run the test

Reviewers: andrewkr, yiwu

Subscribers: leveldb, andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D60819
2016-07-15 16:10:09 -07:00
sdong
6797e6ffac Avoid updating memtable allocated bytes if write_buffer_size is not set
Summary: If options.write_buffer_size is not set, nor options.write_buffer_manager, no need to update the bytes allocated counter in MemTableAllocator, which is expensive in parallel memtable insert case. Remove it can improve parallel memtable insert throughput by 10% with write batch size 128.

Test Plan:
Run benchmarks
TEST_TMPDIR=/dev/shm/ ./db_bench --benchmarks=fillrandom -disable_auto_compactions -level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999 -num=10000000 --writes=1000000 -max_background_flushes=16 -max_write_buffer_number=16 --threads=32 --batch_size=128   -allow_concurrent_memtable_write -enable_write_thread_adaptive_yield

The throughput grows 10% with the benchmark.

Reviewers: andrewkr, yiwu, IslamAbdelRahman, igor, ngbronson

Reviewed By: ngbronson

Subscribers: ngbronson, leveldb, andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D60465
2016-07-13 19:33:57 -07:00
Aaron Gao
dda6c72ac8 Add DestroyColumnFamilyHandle(ColumnFamilyHandle**) to db.h
Summary:
add DestroyColumnFamilyHandle(ColumnFamilyHandle**) to close column family instead of deleting cfh*
User should call this to close a cf and then we can detect the deletion in this function.

Test Plan: make all check -j64

Reviewers: andrewkr, yiwu, sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D60765
2016-07-13 17:59:25 -07:00
Andrew Kryczka
56222f57df Avoid FileMetaData copy
Summary: as titled

Test Plan: unit tests

Reviewers: sdong, lightmark

Reviewed By: lightmark

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D60597
2016-07-13 15:36:22 -07:00
Yi Wu
6ea41f8527 Fix deadlock when trying update options when write stalls
Summary:
When write stalls because of auto compaction is disabled, or stop write trigger is reached,
user may change these two options to unblock writes. Unfortunately we had issue where the write
thread will block the attempt to persist the options, thus creating a deadlock. This diff
fix the issue and add two test cases to detect such deadlock.

Test Plan:
Run unit tests.

Also, revert db_impl.cc to master (but don't revert `DBImpl::BackgroundCompaction:Finish` sync point) and run db_options_test. Both tests should hit deadlock.

Reviewers: sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D60627
2016-07-12 15:30:38 -07:00
Jay Edgar
efd013d6d8 Miscellaneous performance improvements
Summary:
I was investigating performance issues in the SstFileWriter and found all of the following:

- The SstFileWriter::Add() function created a local InternalKey every time it was called generating a allocation and free each time.  Changed to have an InternalKey member variable that can be reset with the new InternalKey::Set() function.
- In SstFileWriter::Add() the smallest_key and largest_key values were assigned the result of a ToString() call, but it is simpler to just assign them directly from the user's key.
- The Slice class had no move constructor so each time one was returned from a function a new one had to be allocated, the old data copied to the new, and the old one was freed.  I added the move constructor which also required a copy constructor and assignment operator.
- The BlockBuilder::CurrentSizeEstimate() function calculates the current estimate size, but was being called 2 or 3 times for each key added.  I changed the class to maintain a running estimate (equal to the original calculation) so that the function can return an already calculated value.
- The code in BlockBuilder::Add() that calculated the shared bytes between the last key and the new key duplicated what Slice::difference_offset does, so I replaced it with the standard function.
- BlockBuilder::Add() had code to copy just the changed portion into the last key value (and asserted that it now matched the new key).  It is more efficient just to copy the whole new key over.
- Moved this same code up into the 'if (use_delta_encoding_)' since the last key value is only needed when delta encoding is on.
- FlushBlockBySizePolicy::BlockAlmostFull calculated a standard deviation value each time it was called, but this information would only change if block_size of block_size_deviation changed, so I created a member variable to hold the value to avoid the calculation each time.
- Each PutVarint??() function has a buffer and calls std::string::append().  Two or three calls in a row could share a buffer and a single call to std::string::append().

Some of these will be helpful outside of the SstFileWriter.  I'm not 100% the addition of the move constructor is appropriate as I wonder why this wasn't done before - maybe because of compiler compatibility?  I tried it on gcc 4.8 and 4.9.

Test Plan: The changes should not affect the results so the existing tests should all still work and no new tests were added.  The value of the changes was seen by manually testing the SstFileWriter class through MyRocks and adding timing code to identify problem areas.

Reviewers: sdong, IslamAbdelRahman

Reviewed By: IslamAbdelRahman

Subscribers: andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D59607
2016-07-12 14:15:32 -07:00
Aaron Gao
816ae098ea fix test failure
Summary: fix Rocksdb Unit Test USER_FAILURE

Test Plan: make all check -j64

Reviewers: sdong, andrewkr

Reviewed By: andrewkr

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D60603
2016-07-11 13:33:52 -07:00
Aaron Gao
8e6b38d895 update DB::AddFile to ingest list of sst files
Summary:
DB::AddFile(std::string file_path) API that allow them to ingest an SST file created using SstFileWriter
We want to update this interface to be able to accept a list of files that will be ingested, DB::AddFile(std::vector<std::string> file_path_list).

Test Plan:
Add test case `AddExternalSstFileList` in `DBSSTTest`. To make sure:
1. files key ranges are not overlapping with each other
2. each file key range dont overlap with the DB key range
3. make sure no snapshots are held

Reviewers: andrewkr, sdong, IslamAbdelRahman

Reviewed By: IslamAbdelRahman

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D58587
2016-07-11 10:43:12 -07:00
Yi Wu
296545a2c7 Fix clang analyzer errors
Summary:
Fixing erros reported by clang static analyzer.
* Removing some unused variables.
* Adding assertions to fix false positives reported by clang analyzer.
* Adding `__clang_analyzer__` macro to suppress false positive warnings.

Test Plan:
    USE_CLANG=1 OPT=-g make analyze -j64

Reviewers: andrewkr, sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D60549
2016-07-08 17:50:51 -07:00
sdong
907f24d0e1 Concurrent memtable inserter to update counters and flush state after all inserts
Summary: In concurrent memtable insert case, updating counters in MemTable::Add() can count for 5% CPU usage. By batch all the counters and update in the end of the write batch, the CPU overheads are overhead in the use cases where more than one key is updated in one write batch.

Test Plan:
Write throughput increases 12% with this benchmark setting:

TEST_TMPDIR=/dev/shm/ ./db_bench --benchmarks=fillrandom -disable_auto_compactions -level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999 -num=10000000 --writes=1000000 -max_background_flushes=16 -max_write_buffer_number=16 --threads=64 --batch_size=128   -allow_concurrent_memtable_write -enable_write_thread_adaptive_yield

Reviewers: andrewkr, IslamAbdelRahman, ngbronson, igor

Reviewed By: ngbronson

Subscribers: ngbronson, leveldb, andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D60495
2016-07-08 10:19:55 -07:00
Andrew Kryczka
e1b3ee8a79 Cleanup auto-roll logger flush-while-rolling test
Summary:
Use @omegaga's awesome feature to avoid use of callbacks for ensuring
SyncPoints happen in a particular thread.

Depends on D60375.

Test Plan:
  $ ./auto_roll_logger_test

Reviewers: omegaga, sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba, omegaga, leveldb

Differential Revision: https://reviews.facebook.net/D60471
2016-07-07 11:35:40 -07:00
omegaga
cd4178a015 Add a new feature to enforce a sync point only active on a thread
Summary: Add markers to sync points. A marked sync point will only be active when it is on the same thread as the marker sync point.

Test Plan: Write a unit test to validate.

Reviewers: sdong, IslamAbdelRahman, andrewkr

Reviewed By: andrewkr

Subscribers: andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D60375
2016-07-07 11:29:14 -07:00
Gunnar Kudrjavets
b954847fca Fix release build for MyRocks by using debug-only code only in debug builds
Summary: MyRocks release integration build breaks because we treat warnings caused by unused variables as errors. Variable `edit` is only used in debug builds. Therefore we need to guard it using `#ifndef NDEBUG` check.

Test Plan:
- `[p]arc diff --preview` for the default validation.
- Verify that release build fails before this fix and passes after applying it.

Reviewers: andrewkr, sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D60423
2016-07-06 16:07:53 -07:00
sdong
a00bf1b3cf Add More Logging to track total_log_size
Summary: We saw instances where total_log_size is off the real value, but I'm not able to reproduce it. Add more logging to help debugging when it happens again.

Test Plan: Run the unit test and see the logging.

Reviewers: andrewkr, yhchiang, igor, IslamAbdelRahman

Reviewed By: IslamAbdelRahman

Subscribers: leveldb, andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D60081
2016-07-06 14:29:18 -07:00
sdong
32df9733d1 Add options.write_buffer_manager: control total memtable size across DB instances
Summary: Add option write_buffer_manager to help users control total memory spent on memtables across multiple DB instances.

Test Plan: Add a new unit test.

Reviewers: yhchiang, IslamAbdelRahman

Reviewed By: IslamAbdelRahman

Subscribers: adela, benj, sumeet, muthu, leveldb, andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D59925
2016-07-05 18:11:25 -07:00
Aaron Gao
5aaef91d4a group multiple batch of flush into one manifest file (one call to LogAndApply)
Summary: Currently, if several flush outputs are committed together, we issue each manifest write per batch (1 batch = 1 flush = 1 sst file = 1+ continuous memtables). Each manifest write requires one fsync and one fsync to parent directory. In some cases, it becomes the bottleneck of write. We should batch them and write in one manifest write when possible.

Test Plan:
` ./db_bench -benchmarks="fillseq" -max_write_buffer_number=16 -max_background_flushes=16 -disable_auto_compactions=true -min_write_buffer_number_to_merge=1 -write_buffer_size=65536 -level0_stop_writes_trigger=10000 -level0_slowdown_writes_trigger=10000`
**Before**
```
Initializing RocksDB Options from the specified file
Initializing RocksDB Options from command-line flags
RocksDB:    version 4.9
Date:       Fri Jul  1 15:38:17 2016
CPU:        32 * Intel(R) Xeon(R) CPU E5-2660 0 @ 2.20GHz
CPUCache:   20480 KB
Keys:       16 bytes each
Values:     100 bytes each (50 bytes after compression)
Entries:    1000000
Prefix:    0 bytes
Keys per prefix:    0
RawSize:    110.6 MB (estimated)
FileSize:   62.9 MB (estimated)
Write rate: 0 bytes/second
Compression: Snappy
Memtablerep: skip_list
Perf Level: 1
WARNING: Assertions are enabled; benchmarks unnecessarily slow
------------------------------------------------
Initializing RocksDB Options from the specified file
Initializing RocksDB Options from command-line flags
DB path: [/tmp/rocksdbtest-112628/dbbench]
fillseq      :     166.277 micros/op 6014 ops/sec;    0.7 MB/s
```
**After**
```
Initializing RocksDB Options from the specified file
Initializing RocksDB Options from command-line flags
RocksDB:    version 4.9
Date:       Fri Jul  1 15:35:05 2016
CPU:        32 * Intel(R) Xeon(R) CPU E5-2660 0 @ 2.20GHz
CPUCache:   20480 KB
Keys:       16 bytes each
Values:     100 bytes each (50 bytes after compression)
Entries:    1000000
Prefix:    0 bytes
Keys per prefix:    0
RawSize:    110.6 MB (estimated)
FileSize:   62.9 MB (estimated)
Write rate: 0 bytes/second
Compression: Snappy
Memtablerep: skip_list
Perf Level: 1
WARNING: Assertions are enabled; benchmarks unnecessarily slow
------------------------------------------------
Initializing RocksDB Options from the specified file
Initializing RocksDB Options from command-line flags
DB path: [/tmp/rocksdbtest-112628/dbbench]
fillseq      :      52.328 micros/op 19110 ops/sec;    2.1 MB/s
```

Reviewers: andrewkr, IslamAbdelRahman, yhchiang, sdong

Reviewed By: sdong

Subscribers: igor, andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D60075
2016-07-05 18:09:59 -07:00
omegaga
a45ee83181 Fix a bug that accesses invalid address in iterator cleanup function
Summary: Reported in T11889874. When registering the cleanup function we should copy the option so that we can still access it if ReadOptions is deleted.

Test Plan: Add a unit test to reproduce this bug.

Reviewers: sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D60087
2016-07-05 11:57:14 -07:00
Gunnar Kudrjavets
bdb1d19a69 Fix UBSan build break caused by variable not initialized
Summary: UBSan is unhappy because `cfd` is not initialized. This breaks UBSan build which in turn breaks MyRocks continuous integration with RocksDB which in turns makes me unhappy :-) Fix this.

Test Plan:
- `[p]arc diff --preview` + Sandcastle.
- Verify that `COMPILE_WITH_UBSAN=1 OPT=-g make J=1 ubsan_check` gets past the break.

Reviewers: andrewkr, hermanlee4, sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D60117
2016-06-29 10:49:25 -07:00
sdong
c4cef07f1b Update DBTestUniversalCompaction.UniversalCompactionSingleSortedRun to use max_size_amplification_percent = 0
Summary: With max_size_amplification_percent = 0 to make sure that DBTestUniversalCompaction.UniversalCompactionSingleSortedRun tests the configuration to compact to one single sorted run.

Test Plan: Run all existing tests

Reviewers: yhchiang, andrewkr, IslamAbdelRahman

Reviewed By: IslamAbdelRahman

Subscribers: leveldb, andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D60021
2016-06-27 15:19:27 -07:00
charsyam
4f2b0946d1 fix simple typos (#1183) 2016-06-25 08:29:40 +01:00
Andrew Kryczka
3b7ed677de ColumnFamilyOptions API [CF + RepairDB part 3/3]
Summary:
Overload RepairDB to take vector-of-ColumnFamilyDescriptor, which tells
us CF name + options. Also takes a ColumnFamilyOptions for unspecified column
families encountered during the repair.

One potentially confusing thing is that we store options in the constructor and
don't invoke AddColumnFamily() until discovering the CF in ScanTable. This is
because we don't know the CF ID until we find a table belonging to that CF.

Depends on D59781.

Test Plan:
  $ ./repair_test

Reviewers: yhchiang, IslamAbdelRahman, sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D59853
2016-06-24 16:29:43 -07:00
Andrew Kryczka
56ac686292 Detect column family from properties [CF + RepairDB part 2/3]
Summary:
This diff uses the CF ID and CF name properties in the SST file
to associate recovered data with the proper column family. Depends on D59775.

- In ScanTable(), create column families in VersionSet each time a new one is discovered (via reading SST file properties)
- In ConvertLogToTable(), dump an SST file for every column family with data in the WAL
- In AddTables(), make a VersionEdit per-column family that adds all of that CF's tables

Test Plan:
  $ ./repair_test

Reviewers: yhchiang, IslamAbdelRahman, sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D59781
2016-06-24 13:12:13 -07:00
Andrew Kryczka
343507afb1 Refactor to use VersionSet [CF + RepairDB part 1/3]
Summary:
To support column families, it is easiest to use VersionSet to manage
our column families (if we don't have Versions then ColumnFamilyData always
behaves as a dummy column family). This diff only refactors the existing repair
logic to use VersionSet; the next two parts will add support for multiple
column families.

Test Plan:
  $ ./repair_test

Reviewers: yhchiang, IslamAbdelRahman, sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D59775
2016-06-24 11:19:40 -07:00
omegaga
c4e19b77e8 Add a read option to enable background purge when cleaning up iterators
Summary:
Add a read option `background_purge_on_iterator_cleanup` to avoid deleting files in foreground when destroying iterators.
Instead, a job is scheduled in high priority queue and would be executed in a separate background thread.

Test Plan: Add a variant of PurgeObsoleteFileTest. Turn on background purge option in the new test, and use sleeping task to ensure files are deleted in background.

Reviewers: IslamAbdelRahman, sdong

Reviewed By: IslamAbdelRahman

Subscribers: andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D59499
2016-06-21 18:41:23 -07:00
Islam AbdelRahman
fa813f7478 Update DB::AddFile() to ingest the file to the lowest possible level
Summary:
DB::AddFile() right now always add the ingested file to L0
update the logic to add the file to the lowest possible level

Test Plan: unit tests

Reviewers: jkedgar, sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba, yoshinorim

Differential Revision: https://reviews.facebook.net/D59637
2016-06-21 17:57:59 -07:00
sdong
7b79238b65 Deprectate filter_deletes
Summary: filter_deltes is not a frequently used feature. Remove it.

Test Plan: Run all test suites.

Reviewers: igor, yhchiang, IslamAbdelRahman

Reviewed By: IslamAbdelRahman

Subscribers: leveldb, andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D59427
2016-06-17 10:30:47 -07:00
Islam AbdelRahman
30a24f2d3d Add InternalStats and logging for AddFile()
Summary:
We dont report the bytes that we ingested from AddFile which make the write amplification numbers incorrect
Update InternalStats and add logging for AddFile()

Test Plan: Make sure the code compile and existing tests pass

Reviewers: lightmark, sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D59763
2016-06-16 16:21:41 -07:00
sdong
249e796dfc Fix Flaky DBCompactionTest.SkipStatsUpdateTest
Summary: DBCompactionTest.SkipStatsUpdateTest sometimes fails. I don't see any verification related to the deletes issued. Remove them to avoid the uncertainty.

Test Plan: Run the test.

Reviewers: IslamAbdelRahman, andrewkr, yhchiang

Reviewed By: yhchiang

Subscribers: leveldb, andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D59613
2016-06-15 12:00:51 -07:00
Islam AbdelRahman
f5177c761f Remove wasteful instrumentation in FullMerge (stacked on D59577)
Summary:
[ This diff is stacked on top of D59577 ]

We keep calling timer.ElapsedNanos() on every call to MergeOperator::FullMerge even when statistics are disabled, this is wasteful.

I run the readseq benchmark on a DB containing 100K merge operands for 100K keys (1 operand per key) with 1GB block cache
I see slight performance improvment

Original results

```
$ ./db_bench --benchmarks="readseq,readseq,readseq,readseq,readseq,readseq,readseq,readseq,readseq" --merge_operator="max" --merge_keys=100000 --num=100000 --db="/dev/shm/100K_merge_compacted/" --cache_size=1073741824 --use_existing_db --disable_auto_compactions
------------------------------------------------
DB path: [/dev/shm/100K_merge_compacted/]
readseq      :       0.498 micros/op 2006597 ops/sec;  222.0 MB/s
DB path: [/dev/shm/100K_merge_compacted/]
readseq      :       0.295 micros/op 3393627 ops/sec;  375.4 MB/s
DB path: [/dev/shm/100K_merge_compacted/]
readseq      :       0.285 micros/op 3511155 ops/sec;  388.4 MB/s
DB path: [/dev/shm/100K_merge_compacted/]
readseq      :       0.286 micros/op 3500470 ops/sec;  387.2 MB/s
DB path: [/dev/shm/100K_merge_compacted/]
readseq      :       0.283 micros/op 3530751 ops/sec;  390.6 MB/s
DB path: [/dev/shm/100K_merge_compacted/]
readseq      :       0.289 micros/op 3464811 ops/sec;  383.3 MB/s
DB path: [/dev/shm/100K_merge_compacted/]
readseq      :       0.277 micros/op 3612814 ops/sec;  399.7 MB/s
DB path: [/dev/shm/100K_merge_compacted/]
readseq      :       0.283 micros/op 3539640 ops/sec;  391.6 MB/s
DB path: [/dev/shm/100K_merge_compacted/]
readseq      :       0.285 micros/op 3503766 ops/sec;  387.6 MB/s
```

After patch

```
$ ./db_bench --benchmarks="readseq,readseq,readseq,readseq,readseq,readseq,readseq,readseq,readseq" --merge_operator="max" --merge_keys=100000 --num=100000 --db="/dev/shm/100K_merge_compacted/" --cache_size=1073741824 --use_existing_db --disable_auto_compactions
------------------------------------------------
DB path: [/dev/shm/100K_merge_compacted/]
readseq      :       0.476 micros/op 2100119 ops/sec;  232.3 MB/s
DB path: [/dev/shm/100K_merge_compacted/]
readseq      :       0.278 micros/op 3600887 ops/sec;  398.4 MB/s
DB path: [/dev/shm/100K_merge_compacted/]
readseq      :       0.275 micros/op 3636698 ops/sec;  402.3 MB/s
DB path: [/dev/shm/100K_merge_compacted/]
readseq      :       0.271 micros/op 3691661 ops/sec;  408.4 MB/s
DB path: [/dev/shm/100K_merge_compacted/]
readseq      :       0.273 micros/op 3661534 ops/sec;  405.1 MB/s
DB path: [/dev/shm/100K_merge_compacted/]
readseq      :       0.276 micros/op 3627106 ops/sec;  401.3 MB/s
DB path: [/dev/shm/100K_merge_compacted/]
readseq      :       0.272 micros/op 3682635 ops/sec;  407.4 MB/s
DB path: [/dev/shm/100K_merge_compacted/]
readseq      :       0.266 micros/op 3758331 ops/sec;  415.8 MB/s
DB path: [/dev/shm/100K_merge_compacted/]
readseq      :       0.266 micros/op 3761907 ops/sec;  416.2 MB/s
```

Test Plan: make check -j64

Reviewers: yhchiang, sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D59583
2016-06-13 16:22:14 -07:00
Islam AbdelRahman
7c919deccc Reuse TimedFullMerge instead of FullMerge + instrumentation
Summary:
We have alot of code duplication whenever we call FullMerge we keep duplicating the instrumentation and statistics code
This is a simple diff to refactor the code to use TimedFullMerge instead of FullMerge

Test Plan: COMPILE_WITH_ASAN=1 make check -j64

Reviewers: andrewkr, yhchiang, sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D59577
2016-06-13 16:17:26 -07:00
Yi Wu
bc8af90e8c add option to not flush memtable on open()
Summary:
Add option to not flush memtable on open()
In case the option is enabled, don't delete existing log files by not updating log numbers to MANIFEST.
Will still flush if we need to (e.g. memtable full in the middle). In that case we also flush final memtable.
If wal_recovery_mode = kPointInTimeRecovery, do not halt immediately after encounter corruption. Instead, check if seq id of next log file is last_log_sequence + 1. In that case we continue recovery.

Test Plan: See unit test.

Reviewers: dhruba, horuff, sdong

Reviewed By: sdong

Subscribers: benj, yhchiang, andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D57813
2016-06-13 11:34:16 -07:00
sdong
6faddd7c55 Merge db/slice.cc into util/slice.cc
Summary: It confuses some compilers to have slice.cc under multiple directories. Merge them.

Test Plan: Run existing tests

Reviewers: andrewkr, yhchiang, IslamAbdelRahman

Reviewed By: IslamAbdelRahman

Subscribers: leveldb, andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D59409
2016-06-10 16:37:36 -07:00
sdong
5009b5326b BlockBasedTable::FullFilterKeyMayMatch() Should skip prefix bloom if full key bloom exists
Summary: Currently, if users define both of full key bloom and prefix bloom in SST files. During Get(), if full key bloom shows the key may exist, we still go ahead and check prefix bloom. This is wasteful. If bloom filter for full keys exists, we should always ignore prefix bloom in Get().

Test Plan: Run existing tests

Reviewers: yhchiang, IslamAbdelRahman

Reviewed By: IslamAbdelRahman

Subscribers: leveldb, andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D57825
2016-06-10 16:27:56 -07:00