Summary:
Implement the ```WaitAll()``` interface in ```LRUCache``` to allow callers to issue multiple lookups in parallel and wait for all of them to complete. Modify ```MultiGet``` to use this to parallelize the secondary cache lookups in order to reduce the overall latency. A call to ```cache->Lookup()``` returns a handle that has an incomplete value (nullptr), and the caller can call ```cache->IsReady()``` to check whether the lookup is complete, and pass a vector of handles to ```WaitAll``` to wait for completion. If any of the lookups fail, ```MultiGet``` will read the block from the SST file.
Another change in this PR is to rename ```SecondaryCacheHandle``` to ```SecondaryCacheResultHandle``` as it more accurately describes the return result of the secondary cache lookup, which is more like a future.
Tests:
1. Add unit tests in lru_cache_test
2. Benchmark results with no secondary cache configured
Master -
```
readrandom : 41.175 micros/op 388562 ops/sec; 106.7 MB/s (7277999 of 7277999 found)
readrandom : 41.217 micros/op 388160 ops/sec; 106.6 MB/s (7274999 of 7274999 found)
multireadrandom : 10.309 micros/op 1552082 ops/sec; (28908992 of 28908992 found)
multireadrandom : 10.321 micros/op 1550218 ops/sec; (29081984 of 29081984 found)
```
This PR -
```
readrandom : 41.158 micros/op 388723 ops/sec; 106.8 MB/s (7290999 of 7290999 found)
readrandom : 41.185 micros/op 388463 ops/sec; 106.7 MB/s (7287999 of 7287999 found)
multireadrandom : 10.277 micros/op 1556801 ops/sec; (29346944 of 29346944 found)
multireadrandom : 10.253 micros/op 1560539 ops/sec; (29274944 of 29274944 found)
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8405
Reviewed By: zhichao-cao
Differential Revision: D29190509
Pulled By: anand1976
fbshipit-source-id: 6f8eff6246712af8a297cfe22ea0d1c3b2a01bb0
Summary:
This PR prepopulates warm/hot data blocks which are already in memory
into block cache at the time of flush. On a flush, the data block that is
in memory (in memtables) get flushed to the device. If using Direct IO,
additional IO is incurred to read this data back into memory again, which
is avoided by enabling newly added option.
Right now, this is enabled only for flush for data blocks. We plan to
expand this option to cover compactions in the future and for other types
of blocks.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8242
Test Plan: Add new unit test
Reviewed By: anand1976
Differential Revision: D28521703
Pulled By: akankshamahajan15
fbshipit-source-id: 7219d6958821cedce689a219c3963a6f1a9d5f05
Summary:
Marked the Ribbon filter and optimize_filters_for_memory features
as production-ready, each enabling memory savings for Bloom-like filters.
Use `NewRibbonFilterPolicy` in place of `NewBloomFilterPolicy` to use
Ribbon filters instead of Bloom, or `ribbonfilter` in place of
`bloomfilter` in configuration string.
Some small refactoring in db_stress.
Removed/refactored unused code in db_bench, in part preparing for future
default possibly being different from "disabled."
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8408
Test Plan:
Lots of prior automated, ad-hoc, and "real world" testing.
Updated tests for new API names. Quick db_bench test:
bloom fillrandom
77730 ops/sec
rocksdb.block.cache.filter.bytes.insert COUNT : 89929384
ribbon fillrandom
71492 ops/sec
rocksdb.block.cache.filter.bytes.insert COUNT : 64531384
Reviewed By: mrambacher
Differential Revision: D29140805
Pulled By: pdillinger
fbshipit-source-id: d742c922722421678f95ad85eeb0aaebc9f5e49a
Summary:
Currently, we either use the file system inode or a monotonically incrementing runtime ID as the block cache key prefix. However, if we use a monotonically incrementing runtime ID (in the case that the file system does not support inode id generation), in some cases, it cannot ensure uniqueness (e.g., we have secondary cache migrated from host to host). We use DbSessionID (20 bytes) + current file number (at most 10 bytes) as the new cache block key prefix when the secondary cache is enabled. So can accommodate scenarios such as transfer of cache state across hosts.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8360
Test Plan: add the test to lru_cache_test
Reviewed By: pdillinger
Differential Revision: D29006215
Pulled By: zhichao-cao
fbshipit-source-id: 6cff686b38d83904667a2bd39923cd030df16814
Summary:
Fix for https://github.com/facebook/rocksdb/issues/8315. Inhe lru caching test, 5100 is not enough to hold meta block and first block in some random case, increase to 6100. Fix the reference binding to null pointer, use template.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8326
Test Plan: make check
Reviewed By: pdillinger
Differential Revision: D28625666
Pulled By: zhichao-cao
fbshipit-source-id: 97b85306ae3d09bfb74addc7c65e57fe55a976a5
Summary:
With Ribbon filter work and possible variance in actual bits
per key (or prefix; general term "entry") to achieve certain FP rates,
I've received a request to be able to track actual bits per key in
generated filters. This change adds a num_filter_entries table
property, which can be combined with filter_size to get bits per key
(entry).
This can vary from num_entries in at least these ways:
* Different versions of same key are only counted once in filters.
* With prefix filters, several user keys map to the same filter entry.
* A single filter can include both prefixes and user keys.
Note that FilterBlockBuilder::NumAdded() didn't do anything useful
except distinguish empty from non-empty.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8323
Test Plan: basic unit test included, others updated
Reviewed By: jay-zhuang
Differential Revision: D28596210
Pulled By: pdillinger
fbshipit-source-id: 529a111f3c84501e5a470bc84705e436ee68c376
Summary:
This change gathers and publishes statistics about the
kinds of items in block cache. This is especially important for
profiling relative usage of cache by index vs. filter vs. data blocks.
It works by iterating over the cache during periodic stats dump
(InternalStats, stats_dump_period_sec) or on demand when
DB::Get(Map)Property(kBlockCacheEntryStats), except that for
efficiency and sharing among column families, saved data from
the last scan is used when the data is not considered too old.
The new information can be seen in info LOG, for example:
Block cache LRUCache@0x7fca62229330 capacity: 95.37 MB collections: 8 last_copies: 0 last_secs: 0.00178 secs_since: 0
Block cache entry stats(count,size,portion): DataBlock(7092,28.24 MB,29.6136%) FilterBlock(215,867.90 KB,0.888728%) FilterMetaBlock(2,5.31 KB,0.00544%) IndexBlock(217,180.11 KB,0.184432%) WriteBuffer(1,256.00 KB,0.262144%) Misc(1,0.00 KB,0%)
And also through DB::GetProperty and GetMapProperty (here using
ldb just for demonstration):
$ ./ldb --db=/dev/shm/dbbench/ get_property rocksdb.block-cache-entry-stats
rocksdb.block-cache-entry-stats.bytes.data-block: 0
rocksdb.block-cache-entry-stats.bytes.deprecated-filter-block: 0
rocksdb.block-cache-entry-stats.bytes.filter-block: 0
rocksdb.block-cache-entry-stats.bytes.filter-meta-block: 0
rocksdb.block-cache-entry-stats.bytes.index-block: 178992
rocksdb.block-cache-entry-stats.bytes.misc: 0
rocksdb.block-cache-entry-stats.bytes.other-block: 0
rocksdb.block-cache-entry-stats.bytes.write-buffer: 0
rocksdb.block-cache-entry-stats.capacity: 8388608
rocksdb.block-cache-entry-stats.count.data-block: 0
rocksdb.block-cache-entry-stats.count.deprecated-filter-block: 0
rocksdb.block-cache-entry-stats.count.filter-block: 0
rocksdb.block-cache-entry-stats.count.filter-meta-block: 0
rocksdb.block-cache-entry-stats.count.index-block: 215
rocksdb.block-cache-entry-stats.count.misc: 1
rocksdb.block-cache-entry-stats.count.other-block: 0
rocksdb.block-cache-entry-stats.count.write-buffer: 0
rocksdb.block-cache-entry-stats.id: LRUCache@0x7f3636661290
rocksdb.block-cache-entry-stats.percent.data-block: 0.000000
rocksdb.block-cache-entry-stats.percent.deprecated-filter-block: 0.000000
rocksdb.block-cache-entry-stats.percent.filter-block: 0.000000
rocksdb.block-cache-entry-stats.percent.filter-meta-block: 0.000000
rocksdb.block-cache-entry-stats.percent.index-block: 2.133751
rocksdb.block-cache-entry-stats.percent.misc: 0.000000
rocksdb.block-cache-entry-stats.percent.other-block: 0.000000
rocksdb.block-cache-entry-stats.percent.write-buffer: 0.000000
rocksdb.block-cache-entry-stats.secs_for_last_collection: 0.000052
rocksdb.block-cache-entry-stats.secs_since_last_collection: 0
Solution detail - We need some way to flag what kind of blocks each
entry belongs to, preferably without changing the Cache API.
One of the complications is that Cache is a general interface that could
have other users that don't adhere to whichever convention we decide
on for keys and values. Or we would pay for an extra field in the Handle
that would only be used for this purpose.
This change uses a back-door approach, the deleter, to indicate the
"role" of a Cache entry (in addition to the value type, implicitly).
This has the added benefit of ensuring proper code origin whenever we
recognize a particular role for a cache entry; if the entry came from
some other part of the code, it will use an unrecognized deleter, which
we simply attribute to the "Misc" role.
An internal API makes for simple instantiation and automatic
registration of Cache deleters for a given value type and "role".
Another internal API, CacheEntryStatsCollector, solves the problem of
caching the results of a scan and sharing them, to ensure scans are
neither excessive nor redundant so as not to harm Cache performance.
Because code is added to BlocklikeTraits, it is pulled out of
block_based_table_reader.cc into its own file.
This is a reformulation of https://github.com/facebook/rocksdb/issues/8276, without the type checking option
(could still be added), and with actual stat gathering.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8297
Test Plan: manual testing with db_bench, and a couple of basic unit tests
Reviewed By: ltamasi
Differential Revision: D28488721
Pulled By: pdillinger
fbshipit-source-id: 472f524a9691b5afb107934be2d41d84f2b129fb
Summary:
This patch does two things:
1) Introduces some aliases in order to eliminate/prevent long-winded type names
w/r/t the internal table property collectors (see e.g.
`std::vector<std::unique_ptr<IntTblPropCollectorFactory>>`).
2) Makes it possible to apply only a subrange of table property collectors during
table building by turning `TableBuilderOptions::int_tbl_prop_collector_factories`
from a pointer to a `vector` into a range (i.e. a pair of iterators).
Rationale: I plan to introduce a BlobDB related table property collector, which
should only be applied during table creation if blob storage is enabled at the moment
(which can be changed dynamically). This change will make it possible to include/
exclude the BlobDB related collector as needed without having to introduce
a second `vector` of collectors in `ColumnFamilyData` with pretty much the same
contents.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8298
Test Plan: `make check`
Reviewed By: jay-zhuang
Differential Revision: D28430910
Pulled By: ltamasi
fbshipit-source-id: a81d28f2c59495865300f43deb2257d2e6977c8e
Summary:
The ImmutableCFOptions contained a bunch of fields that belonged to the ImmutableDBOptions. This change cleans that up by introducing an ImmutableOptions struct. Following the pattern of Options struct, this class inherits from the DB and CFOption structs (of the Immutable form).
Only one structural change (the ImmutableCFOptions::fs was changed to a shared_ptr from a raw one) is in this PR. All of the other changes involve moving the member variables from the ImmutableCFOptions into the ImmutableOptions and changing member variables or function parameters as required for compilation purposes.
Follow-on PRs may do a further clean-up of the code, such as renaming variables (such as "ImmutableOptions cf_options") and potentially eliminating un-needed function parameters (there is no longer a need to pass both an ImmutableDBOptions and an ImmutableOptions to a function).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8262
Reviewed By: pdillinger
Differential Revision: D28226540
Pulled By: mrambacher
fbshipit-source-id: 18ae71eadc879dedbe38b1eb8e6f9ff5c7147dbf
Summary:
Add `num_levels`, `is_bottommost`, and table file creation
`reason` to `FilterBuildingContext`, in anticipation of more powerful
Bloom-like filter support.
To support this, added `is_bottommost` and `reason` to
`TableBuilderOptions`, which allowed removing `reason` parameter from
`rocksdb::BuildTable`.
I attempted to remove `skip_filters` from `TableBuilderOptions`, because
filter construction decisions should arise from options, not one-off
parameters. I could not completely remove it because the public API for
SstFileWriter takes a `skip_filters` parameter, and translating this
into an option change would mean awkwardly replacing the table_factory
if it is BlockBasedTableFactory with new filter_policy=nullptr option.
I marked this public skip_filters option as deprecated because of this
oddity. (skip_filters on the read side probably makes sense.)
At least `skip_filters` is now largely hidden for users of
`TableBuilderOptions` and is no longer used for implementing the
optimize_filters_for_hits option. Bringing the logic for that option
closer to handling of FilterBuildingContext makes it more obvious that
hese two are using the same notion of "bottommost." (Planned:
configuration options for Bloom-like filters that generalize
`optimize_filters_for_hits`)
Recommended follow-up: Try to get away from "bottommost level" naming of
things, which is inaccurate (see
VersionStorageInfo::RangeMightExistAfterSortedRun), and move to
"bottommost run" or just "bottommost."
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8246
Test Plan:
extended an existing unit test to exercise and check various
filter building contexts. Also, existing tests for
optimize_filters_for_hits validate some of the "bottommost" handling,
which is now closely connected to FilterBuildingContext::is_bottommost
through TableBuilderOptions::is_bottommost
Reviewed By: mrambacher
Differential Revision: D28099346
Pulled By: pdillinger
fbshipit-source-id: 2c1072e29c24d4ac404c761a7b7663292372600a
Summary:
Greatly reduced the not-quite-copy-paste giant parameter lists
of rocksdb::NewTableBuilder, rocksdb::BuildTable,
BlockBasedTableBuilder::Rep ctor, and BlockBasedTableBuilder ctor.
Moved weird separate parameter `uint32_t column_family_id` of
TableFactory::NewTableBuilder into TableBuilderOptions.
Re-ordered parameters to TableBuilderOptions ctor, so that `uint64_t
target_file_size` is not randomly placed between uint64_t timestamps
(was easy to mix up).
Replaced a couple of fields of BlockBasedTableBuilder::Rep with a
FilterBuildingContext. The motivation for this change is making it
easier to pass along more data into new fields in FilterBuildingContext
(follow-up PR).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8240
Test Plan: ASAN make check
Reviewed By: mrambacher
Differential Revision: D28075891
Pulled By: pdillinger
fbshipit-source-id: fddb3dbb8260a0e8bdcbb51b877ebabf9a690d4f
Summary:
BlockPrefetcher is used by iterators to prefetch data if they
anticipate more data to be used in future and this is valid for forward sequential
scans. But BlockPrefetcher tracks only num_file_reads_ and not if reads
are sequential. This presents problem for MultiGet with large number of
keys when it reseeks index iterator and data block. FilePrefetchBuffer
can end up doing large readahead for reseeks as readahead size
increases exponentially once readahead is enabled. Same issue is with
BlockBasedTableIterator.
Add previous length and offset read as well in BlockPrefetcher (creates
FilePrefetchBuffer) and FilePrefetchBuffer (does prefetching of data) to
determine if reads are sequential and then prefetch.
Update the last block read after cache hit to take reads from cache also
in account.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7394
Test Plan: Add new unit test case
Reviewed By: anand1976
Differential Revision: D23737617
Pulled By: akankshamahajan15
fbshipit-source-id: 8e6917c25ed87b285ee495d1b68dc623d71205a3
Summary:
Renaming ImmutableCFOptions::info_log and statistics to logger and stats. This is stage 2 in creating an ImmutableOptions class. It is necessary because the names match those in ImmutableOptions and have different types.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8227
Reviewed By: jay-zhuang
Differential Revision: D28000967
Pulled By: mrambacher
fbshipit-source-id: 3bf2aa04e8f1e8724d825b7deacf41080c14420b
Summary:
As previously coded, a Configurable extension would need access to code not in the public API. This change moves RegisterOptions into the Configurable class and therefore available to public extensions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8223
Reviewed By: anand1976
Differential Revision: D27960188
Pulled By: mrambacher
fbshipit-source-id: ac88b19397183df633902def5b5701b9b65fbf40
Summary:
The block_based_table_builder buffers some blocks in memory to construct a good compression dictionary. Before this commit, the keys from each block were buffered separately for convenience. However, the buffered block data implicitly contains all keys. This commit eliminates the redundant key buffers and reduces memory usage.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8219
Reviewed By: ajkr
Differential Revision: D27945851
Pulled By: saketh-are
fbshipit-source-id: caf3cac1217201e080a1e24b542bedf20973afee
Summary:
This partially reverts commit 10196d7edc.
The problem with this change is because of important filter use cases:
FIFO compaction and SST writer. FIFO "compaction" always uses level 0 so
would only use Ribbon filters if specifically including level 0 for the
Ribbon filter policy. SST writer sets level_at_creation=-1 to indicate
unknown level, and this would be treated the same as level 0 unless
fixed.
We are keeping the part about committing to permanent schema, which is
only changes to API comments and HISTORY.md.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8212
Test Plan: CI
Reviewed By: jay-zhuang
Differential Revision: D27896468
Pulled By: pdillinger
fbshipit-source-id: 50a775f7cba5d64fb729d9b982e355864020596e
Summary:
Since the Ribbon filter schema seems good (compatible back to
6.15.0), this change commits to long term support of the SST schema,
even though we expect the API for enabling Ribbon to change (still
called NewExperimentalRibbonFilterPolicy).
This also adds support for "hybrid" configuration in which some levels
use Bloom (higher levels, lower numbered) for speed and the rest use
Ribbon (lower levels, higher numbered) for memory space efficiency.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8198
Test Plan: unit test added, crash test support
Reviewed By: jay-zhuang
Differential Revision: D27831232
Pulled By: pdillinger
fbshipit-source-id: 90e528677689474d293ed6710b42ba89fbd5b5ab
Summary:
According to https://github.com/facebook/rocksdb/issues/5907, each filter partition "should include the bloom of the prefix of the last
key in the previous partition" so that SeekForPrev() in prefix mode can return correct result.
The prefix of the last key in the previous partition does not necessarily have the same prefix
as the first key in the current partition. Regardless of the first key in current partition, the
prefix of the last key in the previous partition should be added. The existing code, however,
does not follow this. Furthermore, there is another issue: when finishing current filter partition,
`FullFilterBlockBuilder::AddPrefix()` is called for the first key in next filter partition, which effectively
overwrites `last_prefix_str_` prematurely. Consequently, when the filter block builder proceeds
to the next partition, `last_prefix_str_` will be the prefix of its first key, leaving no way of adding
the bloom of the prefix of the last key of the previous partition.
Prefix extractor is FixedLength.2.
```
[ filter part 1 ] [ filter part 2 ]
abc d
```
When SeekForPrev("abcd"), checking the filter partition will land on filter part 2 because "abcd" > "abc"
but smaller than "d".
If the filter in filter part 2 happens to return false for the test for "ab", then SeekForPrev("abcd") will build
incorrect iterator tree in non-total-order mode.
Also fix a unit test which starts to fail following this PR. `InDomain` should not fail due to assertion
error when checking on an arbitrary key.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8137
Test Plan:
```
make check
```
Without this fix, the following command will fail pretty soon.
```
./db_stress --acquire_snapshot_one_in=10000 --avoid_flush_during_recovery=0 \
--avoid_unnecessary_blocking_io=0 --backup_max_size=104857600 --backup_one_in=0 \
--batch_protection_bytes_per_key=0 --block_size=16384 --bloom_bits=17 \
--bottommost_compression_type=disable --cache_index_and_filter_blocks=1 --cache_size=1048576 \
--checkpoint_one_in=0 --checksum_type=kxxHash64 --clear_column_family_one_in=0 \
--compact_files_one_in=1000000 --compact_range_one_in=1000000 --compaction_ttl=0 \
--compression_max_dict_buffer_bytes=0 --compression_max_dict_bytes=0 \
--compression_parallel_threads=1 --compression_type=zstd --compression_zstd_max_train_bytes=0 \
--continuous_verification_interval=0 --db=/dev/shm/rocksdb/rocksdb_crashtest_whitebox \
--db_write_buffer_size=8388608 --delpercent=5 --delrangepercent=0 --destroy_db_initially=0 --enable_blob_files=0 \
--enable_compaction_filter=0 --enable_pipelined_write=1 --file_checksum_impl=big --flush_one_in=1000000 \
--format_version=5 --get_current_wal_file_one_in=0 --get_live_files_one_in=1000000 --get_property_one_in=1000000 \
--get_sorted_wal_files_one_in=0 --index_block_restart_interval=4 --index_type=2 --ingest_external_file_one_in=0 \
--iterpercent=10 --key_len_percent_dist=1,30,69 --level_compaction_dynamic_level_bytes=True \
--log2_keys_per_lock=10 --long_running_snapshots=1 --mark_for_compaction_one_file_in=0 \
--max_background_compactions=20 --max_bytes_for_level_base=10485760 --max_key=100000000 --max_key_len=3 \
--max_manifest_file_size=1073741824 --max_write_batch_group_size_bytes=16777216 --max_write_buffer_number=3 \
--max_write_buffer_size_to_maintain=8388608 --memtablerep=skip_list --mmap_read=1 --mock_direct_io=False \
--nooverwritepercent=0 --open_files=500000 --ops_per_thread=20000000 --optimize_filters_for_memory=0 --paranoid_file_checks=1 --partition_filters=1 --partition_pinning=0 --pause_background_one_in=1000000 \
--periodic_compaction_seconds=0 --prefixpercent=5 --progress_reports=0 --read_fault_one_in=0 --read_only=0 \
--readpercent=45 --recycle_log_file_num=0 --reopen=20 --secondary_catch_up_one_in=0 \
--snapshot_hold_ops=100000 --sst_file_manager_bytes_per_sec=104857600 \
--sst_file_manager_bytes_per_truncate=0 --subcompactions=2 --sync=0 --sync_fault_injection=False \
--target_file_size_base=2097152 --target_file_size_multiplier=2 --test_batches_snapshots=0 --test_cf_consistency=0 \
--top_level_index_pinning=0 --unpartitioned_pinning=1 --use_blob_db=0 --use_block_based_filter=0 \
--use_direct_io_for_flush_and_compaction=0 --use_direct_reads=0 --use_full_merge_v1=0 --use_merge=0 \
--use_multiget=0 --use_ribbon_filter=0 --use_txn=0 --user_timestamp_size=8 --verify_checksum=1 \
--verify_checksum_one_in=1000000 --verify_db_one_in=100000 --write_buffer_size=4194304 \
--write_dbid_to_manifest=1 --writepercent=35
```
Reviewed By: pdillinger
Differential Revision: D27553054
Pulled By: riversand963
fbshipit-source-id: 60e391e4a2d8d98a9a3172ec5d6176b90ec3de98
Summary:
Return early in case there are zero data blocks when
`BlockBasedTableBuilder::EnterUnbuffered()` is called. This crash can
only be triggered by applying dictionary compression to SST files that
contain only range tombstones. It cannot be triggered by a low buffer
limit alone since we only consider entering unbuffered mode after
buffering a data block causing the limit to be breached, or `Finish()`ing the file. It also cannot
be triggered by a totally empty file because those go through
`Abandon()` rather than `Finish()` so unbuffered mode is never entered.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8141
Test Plan: added a unit test that repro'd the "Floating point exception"
Reviewed By: riversand963
Differential Revision: D27495640
Pulled By: ajkr
fbshipit-source-id: a463cfba476919dc5c5c380800a75a86c31ffa23
Summary:
Added `TableProperties::{fast,slow}_compression_estimated_data_size`.
These properties are present in block-based tables when
`ColumnFamilyOptions::sample_for_compression > 0` and the necessary
compression library is supported when the file is generated. They
contain estimates of what `TableProperties::data_size` would be if the
"fast"/"slow" compression library had been used instead. One
limitation is we do not record exactly which "fast" (ZSTD or Zlib)
or "slow" (LZ4 or Snappy) compression library produced the result.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8139
Test Plan:
- new unit test
- ran `db_bench` with `sample_for_compression=1`; verified the `data_size` property matches the `{slow,fast}_compression_estimated_data_size` when the same compression type is used for the output file compression and the sampled compression
Reviewed By: riversand963
Differential Revision: D27454338
Pulled By: ajkr
fbshipit-source-id: 9529293de93ddac7f03b2e149d746e9f634abac4
Summary:
Previously it only applied to block-based tables generated by flush. This restriction
was undocumented and blocked a new use case. Now compression sampling
applies to all block-based tables we generate when it is enabled.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8105
Test Plan: new unit test
Reviewed By: riversand963
Differential Revision: D27317275
Pulled By: ajkr
fbshipit-source-id: cd9fcc5178d6515e8cb59c6facb5ac01893cb5b0
Summary:
When timestamp is enabled, key comparison should take this into account.
In `BlockBasedTableReader::Get()`, `BlockBasedTableReader::MultiGet()`,
assume the target key is `key`, and the timestamp upper bound is `ts`.
The highest key in current block is (key, ts1), while the lowest key in next
block is (key, ts2).
If
```
ts1 > ts > ts2
```
then
```
(key, ts1) < (key, ts) < (key, ts2)
```
It can be shown that if `Compare()` is used, then we will mistakenly skip the next
block. Instead, we should use `CompareWithoutTimestamp()`.
The majority of this PR makes some existing tests in `db_with_timestamp_basic_test.cc`
parameterized so that different index types can be tested. A new unit test is
also added for more coverage.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8062
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D27057557
Pulled By: riversand963
fbshipit-source-id: c1062fa7c159ed600a1ad7e461531d52265021f1
Summary:
For performance purposes, the lower level routines were changed to use a SystemClock* instead of a std::shared_ptr<SystemClock>. The shared ptr has some performance degradation on certain hardware classes.
For most of the system, there is no risk of the pointer being deleted/invalid because the shared_ptr will be stored elsewhere. For example, the ImmutableDBOptions stores the Env which has a std::shared_ptr<SystemClock> in it. The SystemClock* within the ImmutableDBOptions is essentially a "short cut" to gain access to this constant resource.
There were a few classes (PeriodicWorkScheduler?) where the "short cut" property did not hold. In those cases, the shared pointer was preserved.
Using db_bench readrandom perf_level=3 on my EC2 box, this change performed as well or better than 6.17:
6.17: readrandom : 28.046 micros/op 854902 ops/sec; 61.3 MB/s (355999 of 355999 found)
6.18: readrandom : 32.615 micros/op 735306 ops/sec; 52.7 MB/s (290999 of 290999 found)
PR: readrandom : 27.500 micros/op 871909 ops/sec; 62.5 MB/s (367999 of 367999 found)
(Note that the times for 6.18 are prior to revert of the SystemClock).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8033
Reviewed By: pdillinger
Differential Revision: D27014563
Pulled By: mrambacher
fbshipit-source-id: ad0459eba03182e454391b5926bf5cdd45657b67
Summary:
This change only affects non-schema-critical aspects of the production candidate Ribbon filter. Specifically, it refines choice of internal configuration parameters based on inputs. The changes are minor enough that the schema tests in bloom_test, some of which depend on this, are unaffected. There are also some minor optimizations and refactorings.
This would be a schema change for "smash" Ribbon, to fix some known issues with small filters, but "smash" Ribbon is not accessible in public APIs. Unit test CompactnessAndBacktrackAndFpRate updated to test small and medium-large filters. Run with --thoroughness=100 or so for much better detection power (not appropriate for continuous regression testing).
Homogenous Ribbon:
This change adds internally a Ribbon filter variant we call Homogeneous Ribbon, in collaboration with Stefan Walzer. The expected "result" value for every key is zero, instead of computed from a hash. Entropy for queries not to be false positives comes from free variables ("overhead") in the solution structure, which are populated pseudorandomly. Construction is slightly faster for not tracking result values, and never fails. Instead, FP rate can jump up whenever and whereever entries are packed too tightly. For small structures, we can choose overhead to make this FP rate jump unlikely, as seen in updated unit test CompactnessAndBacktrackAndFpRate.
Unlike standard Ribbon, Homogeneous Ribbon seems to scale to arbitrary number of keys when accepting an FP rate penalty for small pockets of high FP rate in the structure. For example, 64-bit ribbon with 8 solution columns and 10% allocated space overhead for slots seems to achieve about 10.5% space overhead vs. information-theoretic minimum based on its observed FP rate with expected pockets of degradation. (FP rate is close to 1/256.) If targeting a higher FP rate with fewer solution columns, Homogeneous Ribbon can be even more space efficient, because the penalty from degradation is relatively smaller. If targeting a lower FP rate, Homogeneous Ribbon is less space efficient, as more allocated overhead is needed to keep the FP rate impact of degradation relatively under control. The new OptimizeHomogAtScale tool in ribbon_test helps to find these optimal allocation overheads for different numbers of solution columns. And Ribbon widths, with 128-bit Ribbon apparently cutting space overheads in half vs. 64-bit.
Other misc item specifics:
* Ribbon APIs in util/ribbon_config.h now provide configuration data for not just 5% construction failure rate (95% success), but also 50% and 0.1%.
* Note that the Ribbon structure does not exhibit "threshold" behavior as standard Xor filter does, so there is a roughly fixed space penalty to cut construction failure rate in half. Thus, there isn't really an "almost sure" setting.
* Although we can extrapolate settings for large filters, we don't have a good formula for configuring smaller filters (< 2^17 slots or so), and efforts to summarize with a formula have failed. Thus, small data is hard-coded from updated FindOccupancy tool.
* Enhances ApproximateNumEntries for public API Ribbon using more precise data (new API GetNumToAdd), thus a more accurate but not perfect reversal of CalculateSpace. (bloom_test updated to expect the greater precision)
* Move EndianSwapValue from coding.h to coding_lean.h to keep Ribbon code easily transferable from RocksDB
* Add some missing 'const' to member functions
* Small optimization to 128-bit BitParity
* Small refactoring of BandingStorage in ribbon_alg.h to support Homogeneous Ribbon
* CompactnessAndBacktrackAndFpRate now has an "expand" test: on construction failure, a possible alternative to re-seeding hash functions is simply to increase the number of slots (allocated space overhead) and try again with essentially the same hash values. (Start locations will be different roundings of the same scaled hash values--because fastrange not mod.) This seems to be as effective or more effective than re-seeding, as long as we increase the number of slots (m) by roughly m += m/w where w is the Ribbon width. This way, there is effectively an expansion by one slot for each ribbon-width window in the banding. (This approach assumes that getting "bad data" from your hash function is as unlikely as it naturally should be, e.g. no adversary.)
* 32-bit and 16-bit Ribbon configurations are added to ribbon_test for understanding their behavior, e.g. with FindOccupancy. They are not considered useful at this time and not tested with CompactnessAndBacktrackAndFpRate.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7879
Test Plan: unit test updates included
Reviewed By: jay-zhuang
Differential Revision: D26371245
Pulled By: pdillinger
fbshipit-source-id: da6600d90a3785b99ad17a88b2a3027710b4ea3a
Summary:
In the adapter class `WritableFileStringStreamAdapter`, which wraps WritableFile to be used for std::ostream, previouly only `std::endl` is considered a special case because `endl` is written by `os.put()` directly without going through `xsputn()`. `os.put()` will call `sputc()` and if we further check the internal implementation of `sputc()`, we will see it is
```
int_type __CLR_OR_THIS_CALL sputc(_Elem _Ch) { // put a character
return 0 < _Pnavail() ? _Traits::to_int_type(*_Pninc() = _Ch) : overflow(_Traits::to_int_type(_Ch));
```
As we explicitly disabled buffering, _Pnavail() is always 0. Thus every write, not captured by xsputn, becomes an overflow.
When I run tests on Windows, I found not only `std::endl` will drop into this case, writing an unsigned long long will also call `os.put()` then followed by `sputc()` and eventually call `overflow()`. Therefore, instead of only checking `std::endl`, we should try to append other characters as well unless the appending operation fails.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7991
Reviewed By: jay-zhuang
Differential Revision: D26615692
Pulled By: ajkr
fbshipit-source-id: 4c0003de1645b9531545b23df69b000e07014468
Summary:
RocksDB does auto-readahead for iterators on noticing more
than two reads for a table file. The readahead starts at 8KB and doubles on every
additional read upto BlockBasedTable::kMaxAutoReadAheadSize which is
256*1024.
This PR adds a new option BlockBasedTableOptions::max_auto_readahead_size which
replaces BlockBasedTable::kMaxAutoReadAheadSize and the new option can be
configured.
If max_auto_readahead_size is set 0 then no implicit auto prefetching will
be done. If max_auto_readahead_size provided is less than
8KB (which is initial readahead size used by rocksdb in case of
auto-readahead), readahead size will remain same as max_auto_readahead_size.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7951
Test Plan: Add new unit test case.
Reviewed By: anand1976
Differential Revision: D26568085
Pulled By: akankshamahajan15
fbshipit-source-id: b6543520fc74e97d859f2002328d4c5254d417af
Summary:
The sample selection technique taken in https://github.com/facebook/rocksdb/issues/7970 was problematic
because it had two code paths for sample selection depending on the
number of data blocks, and one of those code paths involved an
allocation. Using prime numbers, we can consolidate into one code path
without allocation. The downside is there will be values of N (number of
data blocks buffered) that suffer from poor spread in the selected
samples.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7987
Test Plan: `make check -j48`
Reviewed By: pdillinger
Differential Revision: D26586147
Pulled By: ajkr
fbshipit-source-id: 62028e54336fadb6e2c7a7fe6747daa05a263d32
Summary:
For dictionary compression, we need to collect some representative samples of the data to be compressed, which we use to either generate or train (when `CompressionOptions::zstd_max_train_bytes > 0`) a dictionary. Previously, the strategy was to buffer all the data blocks during flush, and up to the target file size during compaction. That strategy allowed us to randomly pick samples from as wide a range as possible that'd be guaranteed to land in a single output file.
However, some users try to make huge files in memory-constrained environments, where this strategy can cause OOM. This PR introduces an option, `CompressionOptions::max_dict_buffer_bytes`, that limits how much data blocks are buffered before we switch to unbuffered mode (which means creating the per-SST dictionary, writing out the buffered data, and compressing/writing new blocks as soon as they are built). It is not strict as we currently buffer more than just data blocks -- also keys are buffered. But it does make a step towards giving users predictable memory usage.
Related changes include:
- Changed sampling for dictionary compression to select unique data blocks when there is limited availability of data blocks
- Made use of `BlockBuilder::SwapAndReset()` to save an allocation+memcpy when buffering data blocks for building a dictionary
- Changed `ParseBoolean()` to accept an input containing characters after the boolean. This is necessary since, with this PR, a value for `CompressionOptions::enabled` is no longer necessarily the final component in the `CompressionOptions` string.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7970
Test Plan:
- updated `CompressionOptions` unit tests to verify limit is respected (to the extent expected in the current implementation) in various scenarios of flush/compaction to bottommost/non-bottommost level
- looked at jemalloc heap profiles right before and after switching to unbuffered mode during flush/compaction. Verified memory usage in buffering is proportional to the limit set.
Reviewed By: pdillinger
Differential Revision: D26467994
Pulled By: ajkr
fbshipit-source-id: 3da4ef9fba59974e4ef40e40c01611002c861465
Summary:
Adds support for prefetching data in Ribbon queries,
which especially optimizes batched Ribbon queries for MultiGet
(~222ns/key to ~97ns/key) but also single key queries on cold memory
(~333ns to ~226ns) because many queries span more than one cache line.
This required some refactoring of the query algorithm, and there
does not appear to be a noticeable regression in "hot memory" query
times (perhaps from 48ns to 50ns).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7889
Test Plan:
existing unit tests, plus performance validation with
filter_bench:
Each data point is the best of two runs. I saturated the machine
CPUs with other filter_bench runs in the background.
Before:
$ ./filter_bench -impl=3 -m_keys_total_max=200 -average_keys_per_filter=100000 -m_queries=50
WARNING: Assertions are enabled; benchmarks unnecessarily slow
Building...
Build avg ns/key: 125.86
Number of filters: 1993
Total size (MB): 168.166
Reported total allocated memory (MB): 183.211
Reported internal fragmentation: 8.94626%
Bits/key stored: 7.05341
Prelim FP rate %: 0.951827
----------------------------
Mixed inside/outside queries...
Single filter net ns/op: 48.0111
Batched, prepared net ns/op: 222.384
Batched, unprepared net ns/op: 343.908
Skewed 50% in 1% net ns/op: 252.916
Skewed 80% in 20% net ns/op: 320.579
Random filter net ns/op: 332.957
After:
$ ./filter_bench -impl=3 -m_keys_total_max=200 -average_keys_per_filter=100000 -m_queries=50
WARNING: Assertions are enabled; benchmarks unnecessarily slow
Building...
Build avg ns/key: 128.117
Number of filters: 1993
Total size (MB): 168.166
Reported total allocated memory (MB): 183.211
Reported internal fragmentation: 8.94626%
Bits/key stored: 7.05341
Prelim FP rate %: 0.951827
----------------------------
Mixed inside/outside queries...
Single filter net ns/op: 49.8812
Batched, prepared net ns/op: 97.1514
Batched, unprepared net ns/op: 222.025
Skewed 50% in 1% net ns/op: 197.48
Skewed 80% in 20% net ns/op: 212.457
Random filter net ns/op: 226.464
Bloom comparison, for reference:
$ ./filter_bench -impl=2 -m_keys_total_max=200 -average_keys_per_filter=100000 -m_queries=50
WARNING: Assertions are enabled; benchmarks unnecessarily slow
Building...
Build avg ns/key: 35.3042
Number of filters: 1993
Total size (MB): 238.488
Reported total allocated memory (MB): 262.875
Reported internal fragmentation: 10.2255%
Bits/key stored: 10.0029
Prelim FP rate %: 0.965327
----------------------------
Mixed inside/outside queries...
Single filter net ns/op: 9.09931
Batched, prepared net ns/op: 34.21
Batched, unprepared net ns/op: 88.8564
Skewed 50% in 1% net ns/op: 139.75
Skewed 80% in 20% net ns/op: 181.264
Random filter net ns/op: 173.88
Reviewed By: jay-zhuang
Differential Revision: D26378710
Pulled By: pdillinger
fbshipit-source-id: 058428967c55ed763698284cd3b4bbe3351b6e69
Summary:
Introduces and uses a SystemClock class to RocksDB. This class contains the time-related functions of an Env and these functions can be redirected from the Env to the SystemClock.
Many of the places that used an Env (Timer, PerfStepTimer, RepeatableThread, RateLimiter, WriteController) for time-related functions have been changed to use SystemClock instead. There are likely more places that can be changed, but this is a start to show what can/should be done. Over time it would be nice to migrate most (if not all) of the uses of the time functions from the Env to the SystemClock.
There are several Env classes that implement these functions. Most of these have not been converted yet to SystemClock implementations; that will come in a subsequent PR. It would be good to unify many of the Mock Timer implementations, so that they behave similarly and be tested similarly (some override Sleep, some use a MockSleep, etc).
Additionally, this change will allow new methods to be introduced to the SystemClock (like https://github.com/facebook/rocksdb/issues/7101 WaitFor) in a consistent manner across a smaller number of classes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7858
Reviewed By: pdillinger
Differential Revision: D26006406
Pulled By: mrambacher
fbshipit-source-id: ed10a8abbdab7ff2e23d69d85bd25b3e7e899e90
Summary:
Change the StringEnv and related classes to be based on FileSystem APIs rather than the corresponding Env ones. The StringSink and StringSource classes were changed to be based on the corresponding FS file classes.
Part of a cleanup to use the newer interfaces. This change also eliminates some of the casts/wrappers to LegacyFile classes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7786
Reviewed By: jay-zhuang
Differential Revision: D25761460
Pulled By: anand1976
fbshipit-source-id: 428ae8e32b3db97dbeeca08c9d3bb0d9d4d3a38f
Summary:
RetrieveMultipleBlocks which is used by MultiGet to read data blocks is not updating num_data_read stat in
GetContextStats.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7770
Test Plan: make check -j64
Reviewed By: anand1976
Differential Revision: D25538982
Pulled By: akankshamahajan15
fbshipit-source-id: e3daedb035b1be8ab6af6f115cb3793ccc7b1ec6
Summary:
This disables Linux/amd64 builds in Travis for PRs, and adds a
gcc-10+c++20 build in CircleCI, which should fill out sufficient coverage
vs. what we had in Travis
Fixed a use of std::is_pod, which is deprecated in c++20
Fixed ++ on a volatile in db_repl_stress.cc, with bigger refactoring.
Although ++ on this volatile was probably ok with one thread writer and
one thread reader, the code was still overly complex. There was a
deadcode check for error
`if (replThread.no_read < dataPump.no_records)` which can be proven
never to happen based on the structure of the code. It infinite loops
instead for the case intended to be checked. I just simplified the code
for what should be the same checking power.
Also most configurations seem to be using make parallelism = 2 * vcores,
so fixing / using that.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7791
Test Plan:
CI
and `while ./db_repl_stress; do echo again; done` for a while
Reviewed By: siying
Differential Revision: D25669834
Pulled By: pdillinger
fbshipit-source-id: b2c688053d0b1d52c989903449d3cd27a04130d6
Summary:
Primarily this change refactors the optimize_filters_for_memory
code for Bloom filters, based on malloc_usable_size, to also work for
Ribbon filters.
This change also replaces the somewhat slow but general
BuiltinFilterBitsBuilder::ApproximateNumEntries with
implementation-specific versions for Ribbon (new) and Legacy Bloom
(based on a recently deleted version). The reason is to emphasize
speed in ApproximateNumEntries rather than 100% accuracy.
Justification: ApproximateNumEntries (formerly CalculateNumEntry) is
only used by RocksDB for range-partitioned filters, called each time we
start to construct one. (In theory, it should be possible to reuse the
estimate, but the abstractions provided by FilterPolicy don't really
make that workable.) But this is only used as a heuristic estimate for
hitting a desired partitioned filter size because of alignment to data
blocks, which have various numbers of unique keys or prefixes. The two
factors lead us to prioritize reasonable speed over 100% accuracy.
optimize_filters_for_memory adds extra complication, because precisely
calculating num_entries for some allowed number of bytes depends on state
with optimize_filters_for_memory enabled. And the allocator-agnostic
implementation of optimize_filters_for_memory, using malloc_usable_size,
means we would have to actually allocate memory, many times, just to
precisely determine how many entries (keys) could be added and stay below
some size budget, for the current state. (In a draft, I got this
working, and then realized the balance of speed vs. accuracy was all
wrong.)
So related to that, I have made CalculateSpace, an internal-only API
only used for testing, non-authoritative also if
optimize_filters_for_memory is enabled. This simplifies some code.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7774
Test Plan:
unit test updated, and for FilterSize test, range of tested
values is greatly expanded (still super fast)
Also tested `db_bench -benchmarks=fillrandom,stats -bloom_bits=10 -num=1000000 -partition_index_and_filters -format_version=5 [-optimize_filters_for_memory] [-use_ribbon_filter]` with temporary debug output of generated filter sizes.
Bloom+optimize_filters_for_memory:
1 Filter size: 197 (224 in memory)
134 Filter size: 3525 (3584 in memory)
107 Filter size: 4037 (4096 in memory)
Total on disk: 904,506
Total in memory: 918,752
Ribbon+optimize_filters_for_memory:
1 Filter size: 3061 (3072 in memory)
110 Filter size: 3573 (3584 in memory)
58 Filter size: 4085 (4096 in memory)
Total on disk: 633,021 (-30.0%)
Total in memory: 634,880 (-30.9%)
Bloom (no offm):
1 Filter size: 261 (320 in memory)
1 Filter size: 3333 (3584 in memory)
240 Filter size: 3717 (4096 in memory)
Total on disk: 895,674 (-1% on disk vs. +offm; known tolerable overhead of offm)
Total in memory: 986,944 (+7.4% vs. +offm)
Ribbon (no offm):
1 Filter size: 2949 (3072 in memory)
1 Filter size: 3381 (3584 in memory)
167 Filter size: 3701 (4096 in memory)
Total on disk: 624,397 (-30.3% vs. Bloom)
Total in memory: 690,688 (-30.0% vs. Bloom)
Note that optimize_filters_for_memory is even more effective for Ribbon filter than for cache-local Bloom, because it can close the unused memory gap even tighter than Bloom filter, because of 16 byte increments for Ribbon vs. 64 byte increments for Bloom.
Reviewed By: jay-zhuang
Differential Revision: D25592970
Pulled By: pdillinger
fbshipit-source-id: 606fdaa025bb790d7e9c21601e8ea86e10541912
Summary:
Deprecate CalculateNumEntry and replace with
ApproximateNumEntries (better name) using size_t instead of int and
uint32_t, to minimize confusing casts and bad overflow behavior
(possible though probably not realistic). Bloom sizes are now explicitly
capped at max size supported by implementations: just under 4GiB for
fv=5 Bloom, and just under 512MiB for fv<5 Legacy Bloom. This
hardening could help to set up for fuzzing.
Also, since RocksDB only uses this information as an approximation
for trying to hit certain sizes for partitioned filters, it's more important
that the function be reasonably fast than for it to be completely
accurate. It's hard enough to be 100% accurate for Ribbon (currently
reversing CalculateSpace) that adding optimize_filters_for_memory
into the mix is just not worth trying to be 100% accurate for num
entries for bytes.
Also:
- Cleaned up filter_policy.h to remove MSVC warning handling and
potentially unsafe use of exception for "not implemented"
- Correct the number of entries limit beyond which current Ribbon
implementation falls back on Bloom instead.
- Consistently use "num_entries" rather than "num_entry"
- Remove LegacyBloomBitsBuilder::CalculateNumEntry as it's essentially
obsolete from general implementation
BuiltinFilterBitsBuilder::CalculateNumEntries.
- Fix filter_bench to skip some tests that don't make sense when only
one or a small number of filters has been generated.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7726
Test Plan:
expanded existing unit tests for CalculateSpace /
ApproximateNumEntries. Also manually used filter_bench to verify Legacy and
fv=5 Bloom size caps work (much too expensive for unit test). Note that
the actual bits per key is below requested due to space cap.
$ ./filter_bench -impl=0 -bits_per_key=20 -average_keys_per_filter=256000000 -vary_key_count_ratio=0 -m_keys_total_max=256 -allow_bad_fp_rate
...
Total size (MB): 511.992
Bits/key stored: 16.777
...
$ ./filter_bench -impl=2 -bits_per_key=20 -average_keys_per_filter=2000000000 -vary_key_count_ratio=0 -m_keys_total_max=2000
...
Total size (MB): 4096
Bits/key stored: 17.1799
...
$
Reviewed By: jay-zhuang
Differential Revision: D25239800
Pulled By: pdillinger
fbshipit-source-id: f94e6d065efd31e05ec630ae1a82e6400d8390c4
Summary:
Ensure that when direct IO is enabled and a compressed block cache is
configured, MultiGet inserts compressed data blocks into the compressed
block cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7756
Test Plan: Add unit test to db_basic_test
Reviewed By: cheng-chang
Differential Revision: D25416240
Pulled By: anand1976
fbshipit-source-id: 75d57526370c9c0a45ff72651f3278dbd8a9086f
Summary:
Instead of using `EncodeFixed32` which always serialize a integer to
little endian, we should use the local machine's endianness when
populating a native data structure during options parsing.
Without this fix, `read_amp_bytes_per_bit` may be populated incorrectly
on big-endian machines.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7680
Test Plan: make check
Reviewed By: pdillinger
Differential Revision: D24999166
Pulled By: riversand963
fbshipit-source-id: dc603cff6e17f8fa32479ce6df93b93082e6b0c4
Summary:
A temporary hack to work around a bug in 6.10, 6.11, 6.12, 6.13 and
6.14. The bug will write out 8 bytes to OPTIONS file from the starting
address of BlockBasedTableOptions.read_amp_bytes_per_bit which is
actually a uint32. Consequently, the value of read_amp_bytes_per_bit
written in the OPTIONS file is wrong. From 6.15, RocksDB will
try to parse the read_amp_bytes_per_bit from OPTIONS file as a uint32.
To be able to load OPTIONS file generated by affected releases before
the fix, we need to manually parse read_amp_bytes_per_bit with this hack.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7659
Test Plan:
Generate a db with current 6.14.fb (head at b6db05dbb5). Maybe use db_stress.
Checkout this PR, run
```
~/rocksdb/ldb --db=. --try_load_options --ignore_unknown_options idump --count_only
```
Expect success, and should not see
```
Failed: Invalid argument: Error parsing read_amp_bytes_per_bit:17179869184
```
Also
make check
Reviewed By: anand1976
Differential Revision: D24954752
Pulled By: riversand963
fbshipit-source-id: c7b802fc3e52acd050a4fc1cd475016122234394
Summary:
Added experimental public API for Ribbon filter:
NewExperimentalRibbonFilterPolicy(). This experimental API will
take a "Bloom equivalent" bits per key, and configure the Ribbon
filter for the same FP rate as Bloom would have but ~30% space
savings. (Note: optimize_filters_for_memory is not yet implemented
for Ribbon filter. That can be added with no effect on schema.)
Internally, the Ribbon filter is configured using a "one_in_fp_rate"
value, which is 1 over desired FP rate. For example, use 100 for 1%
FP rate. I'm expecting this will be used in the future for configuring
Bloom-like filters, as I expect people to more commonly hold constant
the filter accuracy and change the space vs. time trade-off, rather than
hold constant the space (per key) and change the accuracy vs. time
trade-off, though we might make that available.
### Benchmarking
```
$ ./filter_bench -impl=2 -quick -m_keys_total_max=200 -average_keys_per_filter=100000 -net_includes_hashing
Building...
Build avg ns/key: 34.1341
Number of filters: 1993
Total size (MB): 238.488
Reported total allocated memory (MB): 262.875
Reported internal fragmentation: 10.2255%
Bits/key stored: 10.0029
----------------------------
Mixed inside/outside queries...
Single filter net ns/op: 18.7508
Random filter net ns/op: 258.246
Average FP rate %: 0.968672
----------------------------
Done. (For more info, run with -legend or -help.)
$ ./filter_bench -impl=3 -quick -m_keys_total_max=200 -average_keys_per_filter=100000 -net_includes_hashing
Building...
Build avg ns/key: 130.851
Number of filters: 1993
Total size (MB): 168.166
Reported total allocated memory (MB): 183.211
Reported internal fragmentation: 8.94626%
Bits/key stored: 7.05341
----------------------------
Mixed inside/outside queries...
Single filter net ns/op: 58.4523
Random filter net ns/op: 363.717
Average FP rate %: 0.952978
----------------------------
Done. (For more info, run with -legend or -help.)
```
168.166 / 238.488 = 0.705 -> 29.5% space reduction
130.851 / 34.1341 = 3.83x construction time for this Ribbon filter vs. lastest Bloom filter (could make that as little as about 2.5x for less space reduction)
### Working around a hashing "flaw"
bloom_test discovered a flaw in the simple hashing applied in
StandardHasher when num_starts == 1 (num_slots == 128), showing an
excessively high FP rate. The problem is that when many entries, on the
order of number of hash bits or kCoeffBits, are associated with the same
start location, the correlation between the CoeffRow and ResultRow (for
efficiency) can lead to a solution that is "universal," or nearly so, for
entries mapping to that start location. (Normally, variance in start
location breaks the effective association between CoeffRow and
ResultRow; the same value for CoeffRow is effectively different if start
locations are different.) Without kUseSmash and with num_starts > 1 (thus
num_starts ~= num_slots), this flaw should be completely irrelevant. Even
with 10M slots, the chances of a single slot having just 16 (or more)
entries map to it--not enough to cause an FP problem, which would be local
to that slot if it happened--is 1 in millions. This spreadsheet formula
shows that: =1/(10000000*(1 - POISSON(15, 1, TRUE)))
As kUseSmash==false (the setting for Standard128RibbonBitsBuilder) is
intended for CPU efficiency of filters with many more entries/slots than
kCoeffBits, a very reasonable work-around is to disallow num_starts==1
when !kUseSmash, by making the minimum non-zero number of slots
2*kCoeffBits. This is the work-around I've applied. This also means that
the new Ribbon filter schema (Standard128RibbonBitsBuilder) is not
space-efficient for less than a few hundred entries. Because of this, I
have made it fall back on constructing a Bloom filter, under existing
schema, when that is more space efficient for small filters. (We can
change this in the future if we want.)
TODO: better unit tests for this case in ribbon_test, and probably
update StandardHasher for kUseSmash case so that it can scale nicely to
small filters.
### Other related changes
* Add Ribbon filter to stress/crash test
* Add Ribbon filter to filter_bench as -impl=3
* Add option string support, as in "filter_policy=experimental_ribbon:5.678;"
where 5.678 is the Bloom equivalent bits per key.
* Rename internal mode BloomFilterPolicy::kAuto to kAutoBloom
* Add a general BuiltinFilterBitsBuilder::CalculateNumEntry based on
binary searching CalculateSpace (inefficient), so that subclasses
(especially experimental ones) don't have to provide an efficient
implementation inverting CalculateSpace.
* Minor refactor FastLocalBloomBitsBuilder for new base class
XXH3pFilterBitsBuilder shared with new Standard128RibbonBitsBuilder,
which allows the latter to fall back on Bloom construction in some
extreme cases.
* Mostly updated bloom_test for Ribbon filter, though a test like
FullBloomTest::Schema is a next TODO to ensure schema stability
(in case this becomes production-ready schema as it is).
* Add some APIs to ribbon_impl.h for configuring Ribbon filters.
Although these are reasonably covered by bloom_test, TODO more unit
tests in ribbon_test
* Added a "tool" FindOccupancyForSuccessRate to ribbon_test to get data
for constructing the linear approximations in GetNumSlotsFor95PctSuccess.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7658
Test Plan:
Some unit tests updated but other testing is left TODO. This
is considered experimental but laying down schema compatibility as early
as possible in case it proves production-quality. Also tested in
stress/crash test.
Reviewed By: jay-zhuang
Differential Revision: D24899349
Pulled By: pdillinger
fbshipit-source-id: 9715f3e6371c959d923aea8077c9423c7a9f82b8
Summary:
The Customizable class is an extension of the Configurable class and allows instances to be created by a name/ID. Classes that extend customizable can define their Type (e.g. "TableFactory", "Cache") and a method to instantiate them (TableFactory::CreateFromString). Customizable objects can be registered with the ObjectRegistry and created dynamically.
Future PRs will make more types of objects extend Customizable.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6590
Reviewed By: cheng-chang
Differential Revision: D24841553
Pulled By: zhichao-cao
fbshipit-source-id: d0c2132bd932e971cbfe2c908ca2e5db30c5e155
Summary:
The filter query key should not contain timestamp. The timestamp is
stripped for Get(), but not MultiGet().
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7589
Reviewed By: riversand963
Differential Revision: D24494661
Pulled By: jay-zhuang
fbshipit-source-id: fc5ff40f9d683a89a760c6ff0ab3aed05a70c317
Summary:
This is a PR generated **semi-automatically** by an internal tool to remove unused includes and `using` statements.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7604
Test Plan: make check
Reviewed By: ajkr
Differential Revision: D24579392
Pulled By: riversand963
fbshipit-source-id: c4bfa6c6b08da1de186690d37eb73d8fff45aecd
Summary:
Fixes Issue https://github.com/facebook/rocksdb/issues/7497
When allow_data_in_errors db_options is set, log error key details in `ParseInternalKey()`
Have fixed most of the calls. Have few TODOs still pending - because have to make more deeper changes to pass in the allow_data_in_errors flag. Will do those in a separate PR later.
Tests:
- make check
- some of the existing tests that exercise the "internal key too small" condition are: dbformat_test, cuckoo_table_builder_test
- some of the existing tests that exercise the corrupted key path are: corruption_test, merge_helper_test, compaction_iterator_test
Example of new status returns:
- Key too small - `Corrupted Key: Internal Key too small. Size=5`
- Corrupt key with allow_data_in_errors option set to false: `Corrupted Key: '<redacted>' seq:3, type:3`
- Corrupt key with allow_data_in_errors option set to true: `Corrupted Key: '61' seq:3, type:3`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7515
Reviewed By: ajkr
Differential Revision: D24240264
Pulled By: ramvadiv
fbshipit-source-id: bc48f5d4475ac19d7713e16df37505b31aac42e7
