Summary:
Extract test cases correctly in run_ci_db_test.ps1 script.
There are some new test group that are ended with # comments. Previously in the script when trying to extract test groups and test cases, the regex rule did not apply to this case so the concatenation of some test group and test case failed, see examples in comments.
Also removed useless trailing whitespaces in the script.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7989
Reviewed By: jay-zhuang
Differential Revision: D26615909
Pulled By: ajkr
fbshipit-source-id: 8e68d599994f17d6fefde0daa925c3018179521a
Summary:
Extend VerifyFileChecksums API to verify blob files in case of
use_file_checksum.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7979
Test Plan: New unit test db_blob_corruption_test
Reviewed By: ltamasi
Differential Revision: D26534040
Pulled By: akankshamahajan15
fbshipit-source-id: 7dc5951a3df9d265ea1265e0122b43c966856ade
Summary:
The sample selection technique taken in https://github.com/facebook/rocksdb/issues/7970 was problematic
because it had two code paths for sample selection depending on the
number of data blocks, and one of those code paths involved an
allocation. Using prime numbers, we can consolidate into one code path
without allocation. The downside is there will be values of N (number of
data blocks buffered) that suffer from poor spread in the selected
samples.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7987
Test Plan: `make check -j48`
Reviewed By: pdillinger
Differential Revision: D26586147
Pulled By: ajkr
fbshipit-source-id: 62028e54336fadb6e2c7a7fe6747daa05a263d32
Summary:
I noticed tests frequently timing out on CircleCI when I submit a PR. I did some investigation and found the SeqAdvanceConcurrentTest suite (OneWriteQueue, TwoWriteQueues) tests were all taking a long time to complete (30 tests each taking at least 15K ms).
This PR adds those test to the "slow reg" list in order to move them earlier in the execution sequence so that they are not the "long tail".
For completeness, other tests that were also slow are:
NumLevels/DBTestUniversalCompaction.UniversalCompactionTrivialMoveTest : 12 tests all taking 12K+ ms
ReadSequentialFileTest with ReadaheadSize: 8 tests all 12K+ ms
WriteUnpreparedTransactionTest.RecoveryTest : 2 tests at 22K+ ms
DBBasicTest.EmptyFlush: 1 test at 35K+ ms
RateLimiterTest.Rate: 1 test at 23K+ ms
BackupableDBTest.ShareTableFilesWithChecksumsTransition: 1 test at 16K+ ms
MulitThreadedDBTest.MultitThreaded: 78 tests at 10K+ ms
TransactionStressTest.DeadlockStress: 7 tests at 11K+ ms
DBBasicTestDeadline.IteratorDeadline: 3 tests at 10K+ ms
No effort was made to determine why the tests were slow.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7973
Reviewed By: jay-zhuang
Differential Revision: D26519130
Pulled By: mrambacher
fbshipit-source-id: 11555c9115acc207e45e210a7fc7f879170a3853
Summary:
For dictionary compression, we need to collect some representative samples of the data to be compressed, which we use to either generate or train (when `CompressionOptions::zstd_max_train_bytes > 0`) a dictionary. Previously, the strategy was to buffer all the data blocks during flush, and up to the target file size during compaction. That strategy allowed us to randomly pick samples from as wide a range as possible that'd be guaranteed to land in a single output file.
However, some users try to make huge files in memory-constrained environments, where this strategy can cause OOM. This PR introduces an option, `CompressionOptions::max_dict_buffer_bytes`, that limits how much data blocks are buffered before we switch to unbuffered mode (which means creating the per-SST dictionary, writing out the buffered data, and compressing/writing new blocks as soon as they are built). It is not strict as we currently buffer more than just data blocks -- also keys are buffered. But it does make a step towards giving users predictable memory usage.
Related changes include:
- Changed sampling for dictionary compression to select unique data blocks when there is limited availability of data blocks
- Made use of `BlockBuilder::SwapAndReset()` to save an allocation+memcpy when buffering data blocks for building a dictionary
- Changed `ParseBoolean()` to accept an input containing characters after the boolean. This is necessary since, with this PR, a value for `CompressionOptions::enabled` is no longer necessarily the final component in the `CompressionOptions` string.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7970
Test Plan:
- updated `CompressionOptions` unit tests to verify limit is respected (to the extent expected in the current implementation) in various scenarios of flush/compaction to bottommost/non-bottommost level
- looked at jemalloc heap profiles right before and after switching to unbuffered mode during flush/compaction. Verified memory usage in buffering is proportional to the limit set.
Reviewed By: pdillinger
Differential Revision: D26467994
Pulled By: ajkr
fbshipit-source-id: 3da4ef9fba59974e4ef40e40c01611002c861465
Summary:
The current implementation of a binary heap in `util/heap.h` does a move-assign in the `pop` method. In the case that there is exactly one element stored in the heap, this ends up being a self-move-assign. This can cause trouble with certain classes, which are not prepared for this. Furthermore, it trips up the glibc STL debugger (`-D_GLIBCXX_DEBUG`), which produces an assertion failure in this case.
This PR addresses this problem by not doing the (unnecessary in this case) move-assign if there is only one element in the heap.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7942
Reviewed By: jay-zhuang
Differential Revision: D26528739
Pulled By: ajkr
fbshipit-source-id: 5ca570e0c4168f086b10308ad766dff84e6e2d03
Summary:
Added a "only_mutable_options" flag to the ConfigOptions. When set, the Configurable methods will only look at/update options that are marked as kMutable.
Fixed DB::SetOptions to allow for the update of any mutable TableFactory options. Fixes https://github.com/facebook/rocksdb/issues/7385.
Added tests for the new flag. Updated HISTORY.md
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7936
Reviewed By: akankshamahajan15
Differential Revision: D26389646
Pulled By: mrambacher
fbshipit-source-id: 6dc247f6e999fa2814059ebbd0af8face109fea0
Summary:
The trace file record and payload encode is fixed, which requires complex backward compatibility resolving. This PR introduce a new trace file format, which makes it easier to add new entries to the payload and does not have backward compatible issues. V 0.1 is still supported in this PR. Added the tracing for lower_bound and upper_bound for iterator.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7977
Test Plan: make check. tested with old trace file in replay and analyzing.
Reviewed By: anand1976
Differential Revision: D26529948
Pulled By: zhichao-cao
fbshipit-source-id: ebb75a127ce3c07c25a1ccc194c551f917896a76
Summary:
Fix this scenario:
trx1> acquire shared lock on $key
trx2> acquire shared lock on the same $key
trx1> attempt to acquire a unique lock on $key.
Lock acquisition will fail, and deadlock detection will start.
It will call iterate_and_get_overlapping_row_locks() which will
produce a list with two locks (shared locks by trx1 and trx2).
However the code in lock_request::build_wait_graph() was not prepared
to find the lock by the same transaction in the list of conflicting
locks. Fix it to ignore it.
(One may suggest to fix iterate_and_get_overlapping_row_locks() to not
include locks by trx1. This is not a good idea, because that function
is also used to report all locks currently held)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7938
Reviewed By: zhichao-cao
Differential Revision: D26529374
Pulled By: ajkr
fbshipit-source-id: d89cbed008db1a97a8f2351b9bfb75310750d16a
Summary:
Ignore return value on WinLogger::CloseInternal() when build with -DROCKSDB_ASSERT_STATUS_CHECKED on windows.
It's a good way to ignore check here?
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7955
Reviewed By: jay-zhuang
Differential Revision: D26524145
Pulled By: ajkr
fbshipit-source-id: f2f643e94cde9772617c68b658fb529fffebd8ce
Summary:
Hi, I noticed a bug in rocksdb C API, where a function is not exported and created a fix.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7967
Reviewed By: jay-zhuang
Differential Revision: D26505722
Pulled By: ajkr
fbshipit-source-id: 05d676dbd59ec87fe32322cda9e39e405b07178d
Summary:
This will fix a missing string separation between `msg[n]` and `state_`.
Example of an error message how its looking now:
```
IO error: No space left on deviceWhile appending to file: /home/willi/src/stable-3.7/tmp/arangosh_CL6EFQ/shell_client/single1/data/engine-rocksdb/126426.sst: No space left on device
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7919
Reviewed By: ajkr
Differential Revision: D26242246
Pulled By: jay-zhuang
fbshipit-source-id: 5d9a0997a410aecfb3781478e57395d3d937bb84
Summary:
TransactionDB uses read callback to filter out un-committed data before
a snapshot. But `MultiGet()` API doesn't use that at all, which causes
returning unwanted data.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7963
Test Plan: Added unittest to reproduce
Reviewed By: anand1976
Differential Revision: D26455851
Pulled By: jay-zhuang
fbshipit-source-id: 265276698cf9d8c4cd79e3250ef10d14375bac55
Summary:
Bug fix for status returned being overridden by Status::NotFound in
DBImpl::OpenForReadOnlyCheckExistence. This was casuing some service
owners to misinterpret the actual error and take appropriate steps.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7972
Reviewed By: riversand963
Differential Revision: D26499598
Pulled By: akankshamahajan15
fbshipit-source-id: 05e9fedbe2a2e0e53135760f8ff578a2816d2b8e
Summary:
The patch adds checkpoint support to BlobDB. Blob files are hard linked or
copied, depending on whether the checkpoint directory is on the same filesystem
or not, similarly to table files.
TODO: Add support for blob files to `ExportColumnFamily` and to the checksum
verification logic used by backup/restore.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7959
Test Plan: Ran `make check` and the crash test for a while.
Reviewed By: riversand963
Differential Revision: D26434768
Pulled By: ltamasi
fbshipit-source-id: 994be55a8dc08133028250760fca440d2c7c4dc5
Summary:
The patch adds the configuration options of the new BlobDB implementation
to `db_bench` and adjusts the help messages of the old (`StackableDB`-based)
BlobDB's options to make it clear which implementation they pertain to.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7956
Test Plan: Ran `make check` and `db_bench` with the new options.
Reviewed By: jay-zhuang
Differential Revision: D26384808
Pulled By: ltamasi
fbshipit-source-id: b4405bb2c56cfd3506d4c32e3329c08dfdf69c94
Summary:
Add support for IOTracing in blob files
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7958
Test Plan:
Add a new test and checked manually the trace_file for blob
files being recorded during read and write.
Reviewed By: ltamasi
Differential Revision: D26415950
Pulled By: akankshamahajan15
fbshipit-source-id: 49c2859b3a4f8307e7cb69a92704403a4da46d44
Summary:
in PR https://github.com/facebook/rocksdb/issues/7419 , we introduce the new Append and PositionedAppend APIs to WritableFile at File System, which enable RocksDB to pass the data verification information (e.g., checksum of the data) to the lower layer. In this PR, we use the new API in WritableFileWriter, such that the file created via WritableFileWrite can pass the checksum to the storage layer. To control which types file should apply the checksum handoff, we add checksum_handoff_file_types to DBOptions. User can use this option to control which file types (Currently supported file tyes: kLogFile, kTableFile, kDescriptorFile.) should use the new Append and PositionedAppend APIs to handoff the verification information.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7523
Test Plan: add new unit test, pass make check/ make asan_check
Reviewed By: pdillinger
Differential Revision: D24313271
Pulled By: zhichao-cao
fbshipit-source-id: aafd69091ae85c3318e3e17cbb96fe7338da11d0
Summary:
Adds support for prefetching data in Ribbon queries,
which especially optimizes batched Ribbon queries for MultiGet
(~222ns/key to ~97ns/key) but also single key queries on cold memory
(~333ns to ~226ns) because many queries span more than one cache line.
This required some refactoring of the query algorithm, and there
does not appear to be a noticeable regression in "hot memory" query
times (perhaps from 48ns to 50ns).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7889
Test Plan:
existing unit tests, plus performance validation with
filter_bench:
Each data point is the best of two runs. I saturated the machine
CPUs with other filter_bench runs in the background.
Before:
$ ./filter_bench -impl=3 -m_keys_total_max=200 -average_keys_per_filter=100000 -m_queries=50
WARNING: Assertions are enabled; benchmarks unnecessarily slow
Building...
Build avg ns/key: 125.86
Number of filters: 1993
Total size (MB): 168.166
Reported total allocated memory (MB): 183.211
Reported internal fragmentation: 8.94626%
Bits/key stored: 7.05341
Prelim FP rate %: 0.951827
----------------------------
Mixed inside/outside queries...
Single filter net ns/op: 48.0111
Batched, prepared net ns/op: 222.384
Batched, unprepared net ns/op: 343.908
Skewed 50% in 1% net ns/op: 252.916
Skewed 80% in 20% net ns/op: 320.579
Random filter net ns/op: 332.957
After:
$ ./filter_bench -impl=3 -m_keys_total_max=200 -average_keys_per_filter=100000 -m_queries=50
WARNING: Assertions are enabled; benchmarks unnecessarily slow
Building...
Build avg ns/key: 128.117
Number of filters: 1993
Total size (MB): 168.166
Reported total allocated memory (MB): 183.211
Reported internal fragmentation: 8.94626%
Bits/key stored: 7.05341
Prelim FP rate %: 0.951827
----------------------------
Mixed inside/outside queries...
Single filter net ns/op: 49.8812
Batched, prepared net ns/op: 97.1514
Batched, unprepared net ns/op: 222.025
Skewed 50% in 1% net ns/op: 197.48
Skewed 80% in 20% net ns/op: 212.457
Random filter net ns/op: 226.464
Bloom comparison, for reference:
$ ./filter_bench -impl=2 -m_keys_total_max=200 -average_keys_per_filter=100000 -m_queries=50
WARNING: Assertions are enabled; benchmarks unnecessarily slow
Building...
Build avg ns/key: 35.3042
Number of filters: 1993
Total size (MB): 238.488
Reported total allocated memory (MB): 262.875
Reported internal fragmentation: 10.2255%
Bits/key stored: 10.0029
Prelim FP rate %: 0.965327
----------------------------
Mixed inside/outside queries...
Single filter net ns/op: 9.09931
Batched, prepared net ns/op: 34.21
Batched, unprepared net ns/op: 88.8564
Skewed 50% in 1% net ns/op: 139.75
Skewed 80% in 20% net ns/op: 181.264
Random filter net ns/op: 173.88
Reviewed By: jay-zhuang
Differential Revision: D26378710
Pulled By: pdillinger
fbshipit-source-id: 058428967c55ed763698284cd3b4bbe3351b6e69
Summary:
With M1 macs being available, it is possible that RocksDB will be built on them, without the resulting artifacts to be intended for iOS, where a non-lite RocksDB is needed.
It is not clear to me why the ROCKSDB_LITE cmake option isn't used for iOS consumer, so sending this pull request as a way to foster discussion and to find a path forward to get a full RocksDB build on M1.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7943
Test Plan:
Applied the following patch:
```
diff --git a/fbcode/opensource/fbcode_builder/manifests/rocksdb b/fbcode/opensource/fbcode_builder/manifests/rocksdb
--- a/fbcode/opensource/fbcode_builder/manifests/rocksdb
+++ b/fbcode/opensource/fbcode_builder/manifests/rocksdb
@@ -2,8 +2,8 @@
name = rocksdb
[download]
-url = https://github.com/facebook/rocksdb/archive/v6.8.1.tar.gz
-sha256 = ca192a06ed3bcb9f09060add7e9d0daee1ae7a8705a3d5ecbe41867c5e2796a2
+url = https://github.com/xavierd/rocksdb/archive/master.zip
+sha256 = f93f3f92df66a8401659e35398749d5910b92bd9c14b8354a35ea8852865c422
[dependencies]
lz4
@@ -11,7 +11,7 @@
[build]
builder = cmake
-subdir = rocksdb-6.8.1
+subdir = rocksdb-master
[cmake.defines]
WITH_SNAPPY=ON
```
And ran `getdeps build eden` on an M1 macbook. The build used to fail at link time due to some RocksDB symbols not being found, it now fails for another reason (x86_64 Rust symbols).
Reviewed By: jay-zhuang
Differential Revision: D26324049
Pulled By: xavierd
fbshipit-source-id: 12d86f3395709c4c323f440844e3ae65672aef2d
Summary:
Due to offline discussion, we use actual url of the clang-format-diff.py and add a note.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7950
Reviewed By: pdillinger
Differential Revision: D26370822
Pulled By: riversand963
fbshipit-source-id: 7508e23c002d56d5c1649090438ef5f8ff2cdbe7
Summary:
Added support for detecting plugins linked in the "plugin/" directory and building them from our Makefile in a standardized way. See "plugin/README.md" for details. An example of a plugin that can be built in this way can be found in https://github.com/ajkr/dedupfs.
There will be more to do in terms of making this process more convenient and adding support for CMake.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7918
Test Plan: my own plugin (https://github.com/ajkr/dedupfs) and also heard this patch worked with ZenFS.
Reviewed By: pdillinger
Differential Revision: D26189969
Pulled By: ajkr
fbshipit-source-id: 6624d4357d0ffbaedb42f0d12a3fcb737c78f758
Summary:
Recent Github actions of format checking fail due to invalid location
from where clang-format-diff.py is downloaded. Update the path to point
to a stable, archived location.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7944
Test Plan: manually check the result of Github action.
Reviewed By: ltamasi
Differential Revision: D26345066
Pulled By: riversand963
fbshipit-source-id: 2b1a58c2e59c2f1eb11202d321d2ea002cb0917e
Summary:
Right now, stress test cannot be configured to use memtable whole key filter without prefix filter. It doesn't appear to be necessary. remove this constraint.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7937
Test Plan: "make crash_test" to be able to run.
Reviewed By: ltamasi
Differential Revision: D26295532
fbshipit-source-id: 30c874a9dc2b672a460603a4ee32368674e0face
Summary:
Explicitly reject all range deletions on `TransactionDB` or `OptimisticTransactionDB`, except when the user provides sufficient promises that allow us to proceed safely. The necessary promises are described in the API doc for `TransactionDB::DeleteRange()`. There is currently no way to provide enough promises to make it safe in `OptimisticTransactionDB`.
Fixes https://github.com/facebook/rocksdb/issues/7913.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7929
Test Plan: unit tests covering the cases it's permitted/rejected
Reviewed By: ltamasi
Differential Revision: D26240254
Pulled By: ajkr
fbshipit-source-id: 2834a0ce64cc3e4c3799e35b885a5e79c2f4f6d9
Summary:
The patch fixes the build for `db_bench_tool_test` and makes the tests pass.
Namely, it fixes the following issues:
* https://github.com/facebook/rocksdb/issues/7703 removed the member variable `fs_` but the test case `OptionsFileMultiLevelUniversal`
was not updated.
* https://github.com/facebook/rocksdb/issues/7344 fixed the `OptionsFile` test case for the case when Snappy is *not* available but at the
same time broke it for the case when it *is* available. (The test used a default-constructed
`ColumnFamilyOptions` object, and the default value of the `compression` option is either
Snappy or no compression depending on whether Snappy is supported.)
* The test used `google::ParseCommandLineFlags` instead of
`GFLAGS_NAMESPACE::ParseCommandLineFlags`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7935
Test Plan: Ran the test both with and without Snappy support.
Reviewed By: zhichao-cao
Differential Revision: D26269765
Pulled By: ltamasi
fbshipit-source-id: b7303d8a981ab299d22ab540e0cbd12d149ed9bb
Summary:
Memtable bloom filter is useful in many use cases. A default value on with conservative 1.5% memory can benefit more use cases than use cases impacted.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6584
Test Plan: Run all existing tests.
Reviewed By: pdillinger
Differential Revision: D20626739
fbshipit-source-id: 1dd45532b932139552519b8c2682bd954550c2f9
Summary:
The patch adds support for the options related to the new BlobDB implementation
to `db_stress`, including support for dynamically adjusting them using `SetOptions`
when `set_options_one_in` and a new flag `allow_setting_blob_options_dynamically`
are specified. (The latter is used to prevent the options from being enabled when
incompatible features are in use.)
The patch also updates the `db_stress` help messages of the existing stacked BlobDB
related options to clarify that they pertain to the old implementation. In addition, it
adds the new BlobDB to the crash test script. In order to prevent a combinatorial explosion
of jobs and still perform whitebox/blackbox testing (including under ASAN/TSAN/UBSAN),
and to also test BlobDB in conjunction with atomic flush and transactions, the script sets
the BlobDB options in 10% of normal/`cf_consistency`/`txn` crash test runs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7900
Test Plan: Ran `make check` and `db_stress`/`db_crashtest.py` with various options.
Reviewed By: jay-zhuang
Differential Revision: D26094913
Pulled By: ltamasi
fbshipit-source-id: c2ef3391a05e43a9687f24e297df05f4a5584814
Summary:
The unimplemented handler will return Status::InvalidArgument() and caused issues when using trace analyzer for write batch record. Override with returning Status::OK()
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7910
Test Plan: tested with real trace, make check
Reviewed By: siying
Differential Revision: D26154327
Pulled By: zhichao-cao
fbshipit-source-id: bcdefd4891f839b2e89e4c079f9f430245f482fb
Summary:
(Fixes a regression introduced in the build_version generation PR https://github.com/facebook/rocksdb/issues/7866 )
In the Makefile case, needed to ignore stderr on the tag (everywhere else was fine).
In the CMAKE case, no GIT implies "changes" so that we use the system date rather than the empty GIT date.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7916
Test Plan: Built in a tree that did not contain the ".git" directory. Validated that no errors appeared during the build process and that the build version date was not empty.
Reviewed By: jay-zhuang
Differential Revision: D26169203
Pulled By: mrambacher
fbshipit-source-id: 3288a23b48d97efed5e5b38c9aefb3ef1153fa16
Summary:
There is a small `SingleDelete` related optimization in the
`CompactionIterator` code: when a `SingleDelete`-`Put` pair is preserved
solely for the purposes of transaction conflict checking, the value
itself gets cleared. (This is referred to as "optimization 3" in the
`CompactionIterator` code.) Though the rest of the code got updated to
support `SingleDelete`'ing blob indexes, this chunk was apparently
missed, resulting in an assertion failure (or `ROCKS_LOG_FATAL` in release
builds) when triggered. Note: in addition to clearing the value, we also
need to update the type of the KV to regular value when dealing with
blob indexes here.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7904
Test Plan: `make check`
Reviewed By: ajkr
Differential Revision: D26118009
Pulled By: ltamasi
fbshipit-source-id: 6bf78043d20265e2b15c2e1ab8865025040c42ae
