Old behavior was to translate the middle mouse button, as well as
every other button that isn't the left or right mouse button,
to act as the middle mouse button (2).
New behavior is to translate only the middle mouse button to 2,
and translate higher-numbered buttons to 8 and higher.
This allows additional mouse buttons to behave under XQuartz
more like they do by default under X11 on other platforms
(e.g. Linux and BSD distributions).
Signed-off-by: Christopher Chavez <chrischavez@gmx.us>
Works around <rdar://problem/7150340>.
Tested-by: Martin Otte <martinjotte@gmail.com>
Tested-by: Tom Lane <tgl@sss.pgh.pa.us>
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
This allows us to remove darwinEvents_lock() and darwinEvents_unlock()
and remove the serverRunning hack from dix
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
AppKit handles crashes on app launch with their own dialog now, so we shouldn't need to do this ourselves.
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
The issue was that we set a flag to ignore the k key's up event when sent
the cmd-h down event, but because the cmd-h keycode hides XQuartz, we
became !_x_active by the time the event is delivered which caused us to
go down a differnet codepath rather than getting a chance to ignore it.
We then incorrectly ignored the next h up key.
https://bugs.freedesktop.org/show_bug.cgi?id=92648
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
+[NSScreen mainScreen] does not mean the primary display. It used to mean the
one with the key window. When "Displays have separate spaces" is enabled, it
means the active screen, the one whose menu bar is mostly opaque. As such, it
may not be the screen whose lower-left corner is located at (0, 0). That's
why its max-Y is not necessarily comparable to its height. That only works
for the primary display.
This code could use [[NSScreen screens] firstObject]. This is always the
primary display, the one whose lower-left corner is at (0, 0).
Once that's done, the above change should be reverted. The height of the
visible frame would be the full height of the screen minus the menu bar _and
the Dock_ if the Dock is along the bottom of the screen.
Actually, there's a theoretically-simpler approach: use
-[NSMenu menuBarHeight]. That replaces a long-deprecated method
+[NSMenuView menuBarHeight]. However, there was a bug in Tiger that led to
the former not working while the latter still worked. I haven't actually
checked recently.
CrossOver's still-kicking X server code uses this code, which tries all of
the above:
NSScreen* primaryScreen = [[NSScreen screens] objectAtIndex:0];
aquaMenuBarHeight = [[NSApp mainMenu] menuBarHeight];
if (!aquaMenuBarHeight) aquaMenuBarHeight = [NSMenuView menuBarHeight];
if (!aquaMenuBarHeight) aquaMenuBarHeight =
NSHeight([primaryScreen frame]) - NSMaxY([primaryScreen visibleFrame]);
Reviewed-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Signed-off-by: Ken Thomases <ken@codeweavers.com>
This should hopefully help out wine clients that were continuing to
have issues after the earlier changes.
http://xquartz.macosforge.org/trac/ticket/548
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
We loose information from AppKit being in our way. Before adopting
smooth scrolling, we always rounded-up the number of scroll button
clicks per NSEvent. Now, the scroll value is accumulated in the
dix, and clicky scroll wheels with legacy X11 clients are seeing
an accumulation of error due to so many translations (button press
to smooth scrolling value in AppKit, passed to the dix, and then
synthesized into a button press). This attempts to make the
situation better.
http://xquartz.macosforge.org/trac/ticket/562
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
This should have no immediate impact aside from fake mouse buttons no longer
working with tablets (where they aren't needed or desired anyways). This
prepares us for future changes.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
This lets use send more accurate data to Xi clients and uses dix
for legacy scroll buttons rather than reinventing the wheel.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
If a FatalError occurs before the server finishes launching, it will
not have drained the launchd-owned DISPLAY socket, so launchd will
just relaunch it. This can cause the server to crash in a tight loop
which will spam the user with CrashReporter windows that claim focus on
appearance.
This allows users stuck in this loop to "deal" with the problem without
popping up a crash report every 10 seconds.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
RENDER has some ugly issues on XQuartz, so add an option to disable RENDER.
Enables workaround for: https://bugs.freedesktop.org/show_bug.cgi?id=26124
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
This is strictly the application of the script 'x-indent-all.sh'
from util/modular. Compared to the patch that Daniel posted in
January, I've added a few indent flags:
-bap
-psl
-T PrivatePtr
-T pmWait
-T _XFUNCPROTOBEGIN
-T _XFUNCPROTOEND
-T _X_EXPORT
The typedefs were needed to make the output of sdksyms.sh match the
previous output, otherwise, the code is formatted badly enough that
sdksyms.sh generates incorrect output.
The generated code was compared with the previous version and found to
be essentially identical -- "assert" line numbers and BUILD_TIME were
the only differences found.
The comparison was done with this script:
dir1=$1
dir2=$2
for dir in $dir1 $dir2; do
(cd $dir && find . -name '*.o' | while read file; do
dir=`dirname $file`
base=`basename $file .o`
dump=$dir/$base.dump
objdump -d $file > $dump
done)
done
find $dir1 -name '*.dump' | while read dump; do
otherdump=`echo $dump | sed "s;$dir1;$dir2;"`
diff -u $dump $otherdump
done
Signed-off-by: Keith Packard <keithp@keithp.com>
Acked-by: Daniel Stone <daniel@fooishbar.org>
Acked-by: Alan Coopersmith <alan.coopersmith@oracle.com>
This preference allows users to override the related option in Mac OS X's
Mouse/Trackpad preferences. This effectively lets the user determine
which "context" all of X11 fits into for context-based scrolling until
such API exists within X11 itself to pass along to X11 clients.
This is applicable to Mav OS X 10.7+
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
This way we'll print an error and still mostly work rather than crashing if
someone installs XQuartz.app incorrectly or tries running the server within
the build system rather than the installed system.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
In addition, this change will not call into the X11 activation unless an X11
window was active when we deactivated. We can't rely on the event and current
key windows because the key window will be nil until activated, and the event
will only reference the window if the window was clicked (whereas it will be
nil if we activated via dock or cmd-tab).
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Additionally removes some dead code and fixes double-locking in
xprIsX11Window. xprIsX11Window doesn't need to do any locking because
those resources are protected by the called functions themselves.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Daniel A. Steffen <dsteffen@apple.com>
