We already have pm_noop.c being built most of the time for the
no-OS-PM case, so just switch to always using it.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
CONFIG_UDEV and CONFIG_UDEV_KMS are the actual defines that are used
in the C code.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
The SCM_RIGHTS flag seems to be the thing that xtrans depends on, and
meson makes the check easy without needing a build option.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
The autoconf build hard-codes XCONFIGFILE to just 'xorg.conf':
XF86CONFIGFILE="xorg.conf"
AC_DEFINE_DIR(XCONFIGFILE, XF86CONFIGFILE, [Name of configuration file])
Later, the X server passes that into DoSubstitution() which expands the path:
DoSubstitution(template="/etc/X11/%X", ..., XConfigFile="xorg.conf")
This returns "/etc/X11/xorg.conf".
The Meson build, on the other hand, sets XCONFIGFILE to
join_paths(get_option('sysconfdir'), 'xorg.conf'). If sysconfdir is /etc, this
results in '/etc/xorg.conf', resulting in DoSubstitution returning
'/etc/X11/etc/xorg.conf'.
Fix this by just hard-coding XCONFIGFILE to 'xorg.conf'.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
'libdir' defaults to 'lib', so running X -showDefaultLibPath just prints 'lib'
instead of '/usr/lib' or '/usr/local/lib'. Use joint_paths() to get the correct
full path.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
This adds initial support for displaying Xwayland applications through
the use of EGLStreams and nvidia's custom wayland protocol by adding
another egl_backend driver. This also adds some additional egl_backend
hooks that are required to make things work properly.
EGLStreams work a lot differently then the traditional way of handling
buffers with wayland. Unfortunately, there are also a LOT of various
pitfalls baked into it's design that need to be explained.
This has a very large and unfortunate implication: direct rendering is,
for the time being at least, impossible to do through EGLStreams. The
main reason being that the EGLStream spec mandates that we lose the
entire color buffer contents with each eglSwapBuffers(), which goes
against X's requirement of not losing data with pixmaps. no way to use
an allocated EGLSurface as the storage for glamor rendering like we do
with GBM, we have to rely on blitting each pixmap to it's respective
EGLSurface producer each frame. In order to pull this off, we add two
different additional egl_backend hooks that GBM opts out of
implementing:
- egl_backend.allow_commits for holding off displaying any EGLStream
backed pixmaps until the point where it's stream is completely
initialized and ready for use
- egl_backend.post_damage for blitting the content of the EGLStream
surface producer before Xwayland actually damages and commits the
wl_surface to the screen.
The other big pitfall here is that using nvidia's wayland-eglstreams
helper library is also not possible for the most part. All of it's API
for creating and destroying streams rely on being able to perform a
roundtrip in order to bring each stream to completion since the wayland
compositor must perform it's job of connecting a consumer to each
EGLstream. Because Xwayland has to potentially handle both responding to
the wayland compositor and it's own X clients, the situation of the
wayland compositor being one of our X clients must be considered. If we
perform a roundtrip with the Wayland compositor, it's possible that the
wayland compositor might currently be connected to us as an X client and
thus hang while both Xwayland and the wayland compositor await responses
from eachother. To avoid this, we work directly with the wayland
protocol and use wl_display_sync() events along with release() events to
set up and destroy EGLStreams asynchronously alongside handling X
clients.
Additionally, since setting up EGLStreams is not an atomic operation we
have to take into consideration the fact that an EGLStream can
potentially be created in response to a window resize, then immediately
deleted due to another pending window resize in the same X client's
pending reqests before Xwayland hits the part of it's event loop where
we read from the wayland compositor. To make this even more painful, we
also have to take into consideration that since EGLStreams are not
atomic that it's possible we could delete wayland resources for an
EGLStream before the compositor even finishes using them and thus run
into errors. So, we use quite a bit of tracking logic to keep EGLStream
objects alive until we know the compositor isn't using them (even if
this means the stream outlives the pixmap it backed).
While the default backend for glamor remains GBM, this patch exists for
users who have had to deal with the reprecussion of their GPU
manufacturers ignoring the advice of upstream and the standardization of
GBM across most major GPU manufacturers. It is not intended to be a
final solution to the GBM debate, but merely a baindaid so our users
don't have to suffer from the consequences of companies avoiding working
upstream. New drivers are strongly encouraged not to use this as a
backend, and use GBM like everyone else. We even spit this out as an
error from Xwayland when using the eglstream backend.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Just a small autogenerated header that will soon contain more then just
one macro.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Install missing headers to the SDK directory to allow external modules
to properly build against the SDK. After this commit, the list of files
installed in the SDK include directory is the same as the list of files
installed by the autotools-based build.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Provide more values for the definitions in xorg-server.h for Meson
builds. The only missing defines left after this are _BSD_SOURCE,
_POSIX_SOURCE and _XOPEN_SOURCE, but Meson seems to already define
these via the command-line if necessary.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Some drivers (such as xf86-input-libinput) require the xorg-server.h to
build. Generate it and install it so that it can be used by users.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
There is no code around that will ever define values for the
WORKING_UNALIGNED_INT or XORG_RELEASE symbols, so they will always end
up commented out and are therefore completely useless.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
There is no code around that will ever define values for the XLOADABLE,
WORKING_UNALIGNED_INT or XORG_RELEASE symbols, so they will always end
up commented out and are therefore completely useless.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Xdmcp is an optional dependency, so make sure the build succeeds if it
is missing.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The autotools build gets this from some macros in fontutil, but they're
just wrappers around pkgconfig.
v2: Use same default as autotools (Keith Packard)
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Having different types of code all trying to check for elevated privileges
is a bad idea. This implementation is the most thorough one.
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Ben Crocker <bcrocker@redhat.com>
Reviewed-by: Antoine Martin <antoine@nagafix.co.uk>
Tested-by: Ben Crocker <bcrocker@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
With earlier commit the required version was bumped to 2.4.89, thus the
guards always evaluate to true.
Fixes: e4e3447603 ("Add RandR leases with modesetting driver support
[v6]")
Cc: Keith Packard <keithp@keithp.com>
Cc: Daniel Stone <daniels@collabora.com>
Cc: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Everything is implemented to support protocol version 1.2. Make it
official.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Otherwise this is broken on cygwin:
rrlease.c: In function ‘ProcRRCreateLease’:
rrlease.c:305:9: error: implicit declaration of function ‘WriteFdToClient’ [-Werror=implicit-function-declaration]
if (WriteFdToClient(client, fd, TRUE) < 0) {
Signed-off-by: Adam Jackson <ajax@redhat.com>
Enable DRI3 v1.2 now that all functions have been implemented and
that there is at least one backend implementing the driver hooks
(modesetting/glamor).
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Implement function added in DRI3 v1.1.
A newest version of libepoxy (>= 1.4.4) is required as earlier
versions use a problematic version of Khronos
EXT_image_dma_buf_import_modifiers spec.
v4: Only send scanout-supported modifiers if flipping is possible
v5: Fix memory corruption in XWayland (uninitialized pointer)
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
It relies on GBM >= 17.1.0 where we can import BO with multiple
planes and a format modifier (GBM_BO_IMPORT_FD_MODIFIER).
v2: Properly free fds in Xwayland
[Also add glamor_egl_ext.h to Makefile.am for distcheck's sake - ajax]
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Retrieve IN_FORMATS property from the plane. It gives the
allowed formats and modifiers for BO allocation.
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
In order to flip between compressed and uncompressed buffers -
something drmModePageFlip explicitly bans us from doing - we need
to port use the atomic modesetting API. It's only 'fake' atomic
though given we still commit for each CRTC separately and
CRTC and connector properties are not set with the atomic API.
The helper functions to retrieve DRM properties have been borrowed
from Weston.
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Add 'check_flip2' hook for driver to let know the core
about why flipping is not possible ('reason').
If it is because of unsupported buffer format/modifier,
a PresentCompleteNotify event is sent to the client with
the PresentCompleteModeSuboptimalCopy mode.
v2: Check for PresentOptionSuboptimal and check driver version
before using 'check_flip2'.
v3: Only require one of 'check_flip' or 'check_flip2' to be
implemented by the driver.
Refactor reasons list to enum
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This adds support for RandR CRTC/Output leases through the modesetting
driver, creating a lease using new kernel infrastructure and returning
that to a client through an fd which will have access to only those
resources.
v2: Restore CRTC mode when leases terminate
When a lease terminates for a crtc we have saved data for, go
ahead and restore the saved mode.
v3: Report RR_Rotate_0 rotations for leased crtcs.
Ignore leased CRTCs when selecting screen size.
Stop leasing encoders, the kernel doesn't do that anymore.
Turn off crtc->enabled while leased so that modesetting
ignores them.
Check lease status before calling any driver mode functions
When starting a lease, mark leased CRTCs as disabled and hide
their cursors. Also, check to see if there are other
non-leased CRTCs which are driving leased Outputs and mark
them as disabled as well. Sometimes an application will lease
an idle crtc instead of the one already associated with the
leased output.
When terminating a lease, reset any CRTCs which are driving
outputs that are no longer leased so that they start working
again.
This required splitting the DIX level lease termination code
into two pieces, one to remove the lease from the system
(RRLeaseTerminated) and a new function that frees the lease
data structure (RRLeaseFree).
v4: Report RR_Rotate_0 rotation for leased crtcs.
v5: Terminate all leases on server reset.
Leases hang around after the associated client exits so that
the client doesn't need to occupy an X server client slot and
consume a file descriptor once it has gotten the output
resources necessary.
Any leases still hanging around when the X server resets or
shuts down need to be cleaned up by calling the kernel to
terminate the lease and freeing any DIX structures.
Note that we cannot simply use the existing
drmmode_terminate_lease function on each lease as that wants
to also reset the video mode, and during server shut down that
modesetting: Validate leases on VT enter
The kernel doesn't allow any master ioctls to run when another
VT is active, including simple things like listing the active
leases. To deal with that, we check the list of leases
whenever the X server VT is activated.
xfree86: hide disabled cursors when resetting after lease termination
The lessee may well have played with cursors and left one
active on our screen. Just tell the kernel to turn it off.
v6: Add meson build infrastructure
[Also bumped libdrm requirement - ajax]
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Add a stub for Xnest so it continues to link, but otherwise we support
GLX on every server so there's no need to make every DDX add it.
Signed-off-by: Adam Jackson <ajax@redhat.com>
The big change here is MakeCurrent and context tag tracking. We now
delegate context tags entirely to the vnd layer, and simply store a
pointer to the context state as the tag data. If a context is deleted
while it's current, we allocate a fake ID for the context and move the
context state there, so the tag data still points to a real context. As
a result we can stop trying so hard to detach the client from contexts
at disconnect time and just let resource destruction handle it.
Since vnd handles all the MakeCurrent protocol now, our request handlers
for it can just be return BadImplementation. We also remove a bunch of
LEGAL_NEW_RESOURCE, because now by the time we're called vnd has already
allocated its tracking resource on that XID.
v2: Update to match v2 of the vnd import, and remove more redundant work
like request length checks.
v3: Add/remove the XID map from the vendor private thunk, not the
backend. (Kyle Brenneman)
v4: Fix deletion of ghost contexts (Kyle Brenneman)
Signed-off-by: Adam Jackson <ajax@redhat.com>
This is based on an out-of-tree module written by Kyle:
https://github.com/kbrenneman/libglvnd/tree/server-libglx
I (ajax) did a bunch of cosmetic fixes, ported it off xfree86 API,
added request length checks, and fixed a minor bug or two.
v2: Use separate functions to set/get a context tag's private data, and
call the backend's MakeCurrent when a client disconnects to unbind the
context. (Kyle Brenneman)
Signed-off-by: Adam Jackson <ajax@redhat.com>
Just mimic autoconf file for xf86bigfont, screensaver,
xres, xace and xinerama extensions
Signed-off-by: Laurent Carlier <lordheavym@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Just mimic autoconf file, DPMS is disabled with Xquartz
Signed-off-by: Laurent Carlier <lordheavym@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The helper xorg_list_is_empty returns True when the list is empty and not when
it contains one or more elements.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Keeps us from needing to add glx/ to the include path everywhere, since
we can't add it to the dix include path because the header file names
conflict with glxproxy.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This really just wants to be the list of disable booleans and
initialization functions, and nothing else. Stop including the protocol
headers from extinit.h, remove a stray mention of xgl, and move an
XInput declaration to a better place.
v2: A bunch of drivers assume they'll get the DPMS tokens implicitly,
so add it to globals.h.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Formerly used by the rgb database code, which hasn't been a thing in
over a decade.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
x11perf -noop with 200 xlogos connected is slightly faster with ports:
before after Operation
---------- ----------------- --------------------
18400000.0 19200000.0 (1.04) X protocol NoOperation
Acked-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Peter Harris <pharris@opentext.com>
AIX's poll only allows FD_SETSIZE entries in the fd list, which is
insufficient for expanded MaxClients.
As a bonus, x11perf -noop with ~250 xlogos connected is slightly faster
with pollset:
before after Operation
--------- ---------------- --------------------
5750000.0 5990000.0 (1.04) X protocol NoOperation
Signed-off-by: Peter Harris <pharris@opentext.com>
Acked-by: Keith Packard <keithp@keithp.com>
If one misconfigures a ZaphodHeads value (more than 20 characters
without a delimiter), we get an overflow of our buffer. Use
xstrtokenize() instead of writing/fixing our own tokenizer.
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
XKB stores some stuff in the ClientRec that, style-wise, should probably
be in a client private. vMinor tracks the client's idea of the XKB
minor version, but is never read, we can just nuke it. vMajor is only
used for a bug-compat workaround for X11R6.0-vintage clients. We're
only using though (1<<4) for xkbClientFlags in the protocol, so we can
pack that field down to a u8 and store the bug-compat flag there.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Changes since v2:
- Don't enable by default for debugoptimized builds
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Now that we can actually configure all of the directories xkb uses for
finding things, we can (finally, but only with meson) finally make it so
that with the correct meson configuration the Xserver will "just work"
without any additional changes to the installation prefix after
building.
For the people like me who have since scripted this part out of their
build process and forgotten about it, building and installing the X
server into a non-standard prefix has always required the following (or
something else that makes sure that X has a valid xkbcomp configuration)
commands be run right after doing the installation:
# start in root of prefix you installed X to
mkdir -pv share/X11/xkb/rules
ln -s /usr/share/X11/xkb/rules/evdev share/X11/xkb/rules/
rm -f bin/xkbcomp
ln -s /usr/bin/xkbcomp bin/
The one last piece of getting rid of this post-install junk is making
sure that we can control the directory that X uses for finding the
xkbcomp binary from meson so we can point it at the system provided
xkbcomp (/usr/bin/xkbcomp or similar). So, this patch adds a
configuration option for controlling this called xkb_bin_dir.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Without this, exa's gc swap macros trigger gcc's -Wdiscarded-qualifiers.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Setting glx_align64 to '' gives a null string in the arguments list passed
to the compiler. This is taken as an input filename, leading to:
"cc: error: : No such file or directory"
Instead, assign an empty list to glx_align64, which gets flattened to
nothing in the arguments list.
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
We can check the version on an existing dependency, rather than spinning
up pkg-config again just to check the right version.
Signed-off-by: Daniel Stone <daniels@collabora.com>
The extension was using the name CARD64 to represent 64-bit values,
with a #define from CARD64 to XSyncValue, a struct with a pair of
32-bit values representing a signed 64-bit value. This interfered
with protocol headers using CARD64 to try to actually store a
uint64_t. Now that stdint.h exists, let's just use that here,
instead.
v2: Fix alarm delta changes.
v3: Do the potentially overflowing math as uint and convert to int
afterward, out of C spec paranoia.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
This allows making the master screen's pixmap_dirty_list entries
explicitly reflect that we're now tracking the root window instead of
the screen pixmap, in order to allow Present page flipping on master
outputs while there are active slave outputs.
Define HAS_DIRTYTRACKING_DRAWABLE_SRC for drivers to check, but leave
HAS_DIRTYTRACKING_ROTATION defined as well to make things slightly
easier for drivers.
Reviewed-by: Adam Jackson <ajax@redhat.com>
The epoll code depends on epoll_create1, not epoll_create.
Signed-off-by: Peter Harris <pharris@opentext.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
This appears to be essentially unused. The only known client-side
library for the SELinux extension is xcb, which does not look for the
name "Flask". The "SGI-GLX" alias for GLX appears to be a bit of
superstition at this point, NVIDIA's driver does not expose it and Mesa
does not check for it.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Acked-by: Keith Packard <keithp@keithp.com>
This needs a meson with PRs #1784, #1792 and #1794
Future work: remove conditionals which are always on, and simplify redundant
CYGDEBUG conditionals
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Eric Anholt <eric@anholt.net>
I misspelled the enable flag, so DRI3 would throw BadImplementation
when you tried to start any GL app. Same as in
c7be7a688a, we also convert it to #ifdef
for consistency.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
C99 isn't enough on its own to get POSIX feature sets defined.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Tested-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
If we're linking with libbsd anyway, we might as well use the functions
it provides instead of compiling our replacements.
Signed-off-by: Peter Harris <pharris@opentext.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Set HAVE_REALLOCARRAY, HAVE_SIGACTION, HAVE_STRCASESTR, HAVE_STRLCAT,
HAVE_STRLCPY, HAVE_TIMINGSAFE_MEMCMP, and BUSFAULT.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Peter Harris <pharris@opentext.com>
Add options for DRI{1,2,3}
shmfence is required for DRI3
libdrm is required for any DRI{1,2,3}
Consolidate calls to dependency('libdrm')
Set WITH_LIBDRM when building with libdrm
v2:
Initialize libxserver_dri3 to []
Manually flatten libxserver, since meson doesn't (currently)
Use version_compare rather than circumloctions with dependency()
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Eric Anholt <eric@anholt.net>
glibc would like to stop declaring major()/minor() macros in
<sys/types.h> because that header gets included absolutely everywhere
and unix device major/minor is perhaps usually not what's expected. Fair
enough. If one includes <sys/sysmacros.h> as well then glibc knows we
meant it and doesn't warn, so do that if it exists.
Signed-off-by: Adam Jackson <ajax@redhat.com>
This is a work in progress that builds Xvfb, Xephyr, Xwayland, Xnest,
and Xdmx so far. The outline of Xquartz/Xwin support is in tree, but
hasn't been built yet. The unit tests are also not done.
The intent is to build this as a complete replacement for the
autotools system, then eventually replace autotools. meson is faster
to generate the build, faster to run the bulid, shorter to write the
build files in, and less error-prone than autotools.
v2: Fix indentation nits, move version declaration to project(), use
existing meson_options for version-config.h's vendor name/web.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
We mostly use #ifdef throughout the tree, and this lets the generated
config.h files just be #define TOKEN instead of #define TOKEN 1.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
The previous misc.h code went out of its way to allow swapping of
unaligned pointers to values. However, the members of an X
request/response are always naturally aligned within the struct, and
the buffers containing a request/response will also be aligned to at
least 8 bytes, so we can just drop it.
text data bss dec hex filename
before: 2215167 51552 132016 2398735 249a0f hw/xfree86/Xorg
after: 2214919 51552 132016 2398487 249917 hw/xfree86/Xorg
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
The clever pointer tricks were actually not working, and we were doing
the byte-by-byte moves in general. By just doing the memcpy and
obvious byte swap code, we end up generating actual byte swap
instructions, thanks to optimizing compilers.
text data bss dec hex filename
before: 2240807 51552 132016 2424375 24fe37 hw/xfree86/Xorg
after: 2215167 51552 132016 2398735 249a0f hw/xfree86/Xorg
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
parser/scan.c was checking for #ifdef XCONFIGFILE and XCONFIGDIR and
defaulting to "xorg.conf", and "xorg.conf.d", so if you had changed
__XCONFIGFILE__ to anything else, it would have got out of sync.
Settle on the name without gratuitous underscores.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
This dumps a ton of configure-time checks for system endian macros.
Given that we're marking the mixed-endian fixup code as cold, getting
at the system macros is a waste of code.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Most of this is a legacy of the old "extmod" design where you could load
_some_ extensions dynamically but only if the server had been built with
support for them in the first place.
Note that since we now only initialize the DPMS extension if at least
one screen supports it, we no longer need DPMSCapableFlag: if it would
be false, we would never read its value.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Following on from the previous change, this adds a DPMS hook to the
ScreenRec and uses that to infer DPMS support. As a result we can drop
the dpms stub code from Xext.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
It had nothing left in it that was used but wasn't in dix-config.h.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
The actual code was gone in 27819950e4,
but some checks remained.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
ajax deleted the evdev driver in the removal of fbdev and the linux
backend.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
None of this is actually wired up to anything, so we can also remove the
devPrivates from the DamageRec. The DamageExtRec is what would need
devPrivates for selinux labeling, in principle.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
v2:
- Require power-of-two bpp in ScreenInit
- Eliminate fbCreatePixmapBpp
v3
- Squash in the exa and glamor changes so we can remove pRotatedPixmap
in the same stroke.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This is for glamor can support fd from DRM render node which is useful
for a render only DDX.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Qiang Yu <Qiang.Yu@amd.com>
Provide the function definition for systems that don't have it.
Signed-off-by: Matthieu Herrb <matthieu@herrb.eu>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
The input thread should generate events, not send them. Make it easier to
find the instances where it's doing so.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
This will be used by in-server features that need to react to property
changes. The first one will be _XWAYLAND_ALLOW_COMMITS.
Signed-off-by: Adam Jackson <ajax@redhat.com>
[Pekka: add commit message body]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
A client which is attended while a grab is blocking execution of its
requests needs to be placed in the saved_ready_clients list so that it
will get scheduled once the grab terminates. Otherwise, if the client
never sends another request, there is no way for it to be placed in
the ready_clients list.
v2: Wrap comment above mark_client_saved_ready.
Remove test for OS_COMM_IGNORED which will always be true.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99333
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
I think it is possible that output could get queued to a client during
CloseDownClient. After it is removed from the pending queue, active
grabs are released, the client is awoken if sleeping and any work
queue entries related to the client are processed.
To fix this, move the call removing it from the output_pending chain
until after clientGone has been set and then check clientGone in
output_pending_mark.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1382444
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Special case for the systemd-logind case in xfree86: when we're vt-switched
away and a device is plugged in, we get a paused fd from logind. Since we
can't probe the device or do anything with it, we store that device in the
xfree86 and handle it later when we vt-switch back. The device is not added to
inputInfo.devices until that time.
When the device is removed while still vt-switched away, the the config system
never notifies the DDX. It only runs through inputInfo.devices and our device
was never added to that.
When a device is plugged in, removed, and plugged in again while vt-switched
away, we have two entries in the xfree86-specific list that refer to the same
device node, both pending for addition later. On VT switch back, the first one
(the already removed one) will be added successfully, the second one (the
still plugged-in one) fails. Since the fd is correct, the device works until
it is removed again. The removed devices' config_info (i.e. the syspath)
doesn't match the actual device we addded tough (the input number increases
with each plug), it doesn't get removed, the fd remains open and we lose track
of the fd count. Plugging the device in again leads to a dead device.
Fix this by adding a call to notify the DDX to purge any remainders of devices
with the given config_info, that's the only identifiable bit we have at this
point.
https://bugs.freedesktop.org/show_bug.cgi?id=97928
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Add a valuator mask setter for setting absolute coordinate combined
with unaccelerated motion deltas. This will later be used by Xwayland
to combine a wl_pointer.motion() event with the unaccelerated delta of
a wp_relative_pointer.relative_motion() event.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This function will be called when a pointer is grabbed non-root window
set as the 'confineTo'. This will enable the ddx to handle the
confinement their own way.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
This new vfunc will be called, if set, after a client has issued a
WarpPointer request. This is necessary for implementing pointer warp
emulation in Xwayland.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
If windowsdriproto headers are available, build a Windows-DRI extension,
which supports requests to enable local clients to directly render GL to a
Windows drawable:
- a query to check if WGL is being used on a screen
- a query to map a fbconfigID to a native pixelformatindex
- a query to map a drawable to a native handle
Windows-DRI can only be useful if we are using WGL, so make an note if WGL
is active on a screen.
Make validGlxDrawable() public
Adjust glxWinSetPixelFormat() so it doesn't require a context, just a
screen and config.
That enables factoring out the deferred drawable creation code as
glxWinDeferredCreateDrawable()
Enhance glxWinDeferredCreateDrawable(), so that pixmaps are placed into a
file mapping, so they exist in memory which can be shared with the direct
rendering process.
Currently, this file mapping is accessed by a name generated from the XID.
This will not be unique across multiple server instances. It would perhaps
be better, although more complicated, to use an anonymous file mapping, and
then duplicate the handle for the direct rendering process.
Use glxWinDeferredCreateDrawable() to ensure the native handle exists for
the Windows-DRI query to map a drawable to native handle.
v2:
Various printf format warning fixes
v3:
Fix format warnings on x86
Move some uninteresting windows-dri output to debug log level
v4:
check for windowsdriproto when --enable-windowsdri
use windowsdriproto_CFLAGS
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Autoconf logic borrowed from glib
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
This is a preparation patch for adding prime hw-cursor support.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
poll provides per-fd notification of failure, so we don't need
CheckConnections anymore.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
There's no reason not to offer ridiculous numbers of clients; only a
few static data structures are arrays of this length.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Eliminates all of the fd_set mangling in the server main thread
v2: Listen for POLLOUT while writes are blocked.
v3: Only mark client not ready on EAGAIN return from read
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This converts the dispatch loop into using a list of ready clients
instead of an array. This changes the WaitForSomething API so that it
notifies DIX when a client becomes ready to read, instead of returning
the set of ready clients.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This provides a wrapper around poll or epoll providing a
callback-based interface for monitoring activity on a large set of
file descriptors.
v2: use xserver_poll API instead of poll. Don't use WSAPoll as
that is broken.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
v2: rename as 'xserver_poll' to avoid potential library name
collisions. Provide 'xserver_poll.h' which uses the system
poll where available and falls back to this emulation otherwise.
Autodetects when this is required, building the emulation only
then
Source: https://github.com/bmc/poll
Signed-off-by: Adam Jackson <ajax@redhat.com>
This provides a way to report errors on file descriptors that is
better defined than "any bits which are not READ or WRITE".
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The timeout resolution offered in the AdjustWaitForDelay call is
only milliseconds, so passing around the timeout as a pointer to a
struct timeval is not helpful. Doing everything in milliseconds up to
the point of the select call simplifies the code without affecting
functionality at all.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
All uses of these interfaces should instead be using the NotifyFd API
instead.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This removes the last uses of fd_set from the server interfaces
outside of the OS layer itself.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
With no users of the interface needing the readmask anymore, we can
remove it from the argument passed to these functions.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This new libXfont API eliminates exposing internal X server symbols to
the font library, replacing those with a struct full of the entire API
needed to use that library.
v2: Use libXfont2 instead of libXfont_2
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Adds typedefs for (*RRStartFlippingPixmapTrackingProcPtr),
(*RREnableSharedPixmapFlippingProcPtr),
and (*RRDisableSharedPixmapFlippingProcPtr) in randrstr.h.
Adds typedefs for (*PresentSharedPixmapProcPtr),
(*SharedPixmapNotifyDamageProcPtr),
(*RequestSharedPixmapNotifyDamageProcPtr), and
(*StopFlippingPixmapTrackingProcPtr) in scrnintstr.h.
Adds RR(Enable/Disable)SharedPixmapFlipping, and
RRStartFlippingPixmapTracking to rrScrnPrivRec.
Adds StopFlippingPixmapTracking, PresentSharedPixmap,
SharedPixmapNotifyDamage, and RequestSharedPixmapNotifyDamage to ScreenRec.
rrScrnPrivRec used for functions that use RandR-private data types, and
ScreenRec used for the rest.
RREnableSharedPixmapFlipping will allow the sink driver to setup for
flipping between two shared pixmaps.
RRDisableSharedPixmapFlipping will allow the sink driver to do teardown
associated with flipping between two shared pixmaps.
(RRStart/Stop)FlippingPixmapTracking are merely the double-buffered
equivalents of (Start/Stop)PixmapTracking, allowing the source driver to do
whatever setup and teardown necessary for presenting on the two shared
pixmaps.
PresentSharedPixmap is a function exposed by the source driver for the X
server or sink driver to call to request a present on a given shared
pixmap. This way, presents can be driven by the sink's vblank instead of a
timer or similar mechanism.
SharedPixmapNotifyDamage and RequestSharedPixmapNotifyDamage are OPTIONAL
(even for double-buffered PRIME) functions exposed by the sink driver and
the source driver, respectively. By calling
master->RequestSharedPixmapNotifyDamage(ppix), the sink driver can request
for the source driver to call slave->SharedPixmapNotifyDamage(ppix) in
response to damage on the master screen pixmap tracked by ppix.
v1: Initial commit
v2: Rename PresentTrackedFlippingPixmap to PresentSharedPixmap
Add SharedPixmapNotifyDamage / RequestSharedPixmapNotifyDamage
v3: Add RRCrtcPtr as a parameter to StartFlippingPixmapTracking
Move functions that use RandR-private data types to rrScrnPrivRec.
v4: Unchanged
v5: Add front and back parameters to RREnableSharedPixmapFlippingProcPtr
v6: Rebase onto ToT
v7: Unchanged
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Goins <agoins@nvidia.com>
A single provider can be both a offload and source slave at the same time,
the use of seperate lists breaks in this case e.g. :
xrandr --listproviders
Providers: number : 2
Provider 0: id: 0x7b cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 3 outputs: 2 associated providers: 0 name:modesetting
Provider 1: id: 0x46 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 2 outputs: 5 associated providers: 0 name:modesetting
xrandr --setprovideroutputsource 1 0x7b
xrandr --listproviders
Providers: number : 2
Provider 0: id: 0x7b cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 3 outputs: 2 associated providers: 1 name:modesetting
Provider 1: id: 0x46 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 2 outputs: 5 associated providers: 1 name:modesetting
xrandr --setprovideroffloadsink 1 0x7b
xrandr --listproviders
Providers: number : 3
Provider 0: id: 0x7b cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 3 outputs: 2 associated providers: 2 name:modesetting
Provider 1: id: 0x46 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 2 outputs: 5 associated providers: 2 name:modesetting
Provider 2: id: 0x46 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 2 outputs: 5 associated providers: 2 name:modesetting
Not good. The problem is that the provider with id 0x46 now is on both
the output_slave_list and the offload_slave_list of the master screen.
This commit fixes this by unifying all 3 lists into a single slaves list.
Note that this does change the struct _Screen definition, so this is an ABI
break. I do not expect any of the drivers to actually use the removed / changed
fields so a recompile should suffice.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
A new --with-fallback-input-driver=foo option allows selecting a
fallback driver for the server if the driver configured for the device
is not found. Note that this only applies when the device has a driver
assigned and that module fails to load, devices without a driver are
ignored as usual.
This avoids the situation where a configuration assigns e.g. the
synaptics driver but that driver is not available on the system,
resulting in a dead device. A fallback driver can at least provides some
functionality.
This becomes more important as we move towards making other driver true
leaf nodes that can be installed/uninstalled as requested. Specifically,
wacom and synaptics, a config that assigns either driver should be
viable even when the driver itself is not (yet) installed on the system.
It is up to the distributions to make sure that the fallback driver is
always installed. The fallback driver can be disabled with
--without-fallback-input-driver and is disabled by default on non-Linux
systems because we don't have generic drivers on those platforms.
Default driver on Linux is libinput, evdev is the only other serious
candidate here.
Sample log output:
[ 3274.421] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event4)
[ 3274.421] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad weird driver"
[ 3274.421] (II) LoadModule: "banana"
[ 3274.422] (WW) Warning, couldn't open module banana
[ 3274.422] (II) UnloadModule: "banana"
[ 3274.422] (II) Unloading banana
[ 3274.422] (EE) Failed to load module "banana" (module does not exist, 0)
[ 3274.422] (EE) No input driver matching `banana'
[ 3274.422] (II) Falling back to input driver `libinput'
.. server proceeds to assign libinput, init the device, world peace and rainbows
everywhere, truly what a sight. Shame about the banana though.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This is an ABI break, in that we now pass NULL to a function that hasn't
accepted it before.
Alex Goins had a different patch for this but it wasn't symmetrical, it
freed something in a very different place than it allocated it, this
attempts to retain symmetry in the releasing of the backing bo.
v2: use a new toplevel API, though it still passes NULL to something
that wasn't expecting it.
v3: pass -1 instead of 0.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Alex Goins <agoins at nvidia.com>
As the man page for the latter states:
The effects of signal() in a multithreaded process are unspecified.
We already have an interface to call sigaction() instead, use it.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
The xserver generates the key repeat by itself.
But when used with another server processing inputs first (e.g. a
Wayland compositor), the other server may be busy dealing with some
other things and not queue up key release events in time.
Add a vfunc in XkbSrvInfo to possibly add a check before re-emitting a
keypress event in the AccessX timer handler, so that the key repeat has
a chance to be denied if the server processing the input is not ready.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
By default the X server will try CLOCK_MONOTONIC_COARSE before
CLOCK_MONOTONIC, while A Wayland compositor may only support getting
their timestamps from the CLOCK_MONOTONIC clock. This causes various
issues since it may happen that a timestamp from CLOCK_MONOTONIC
retrieved before a sending an X request will still be "later" than the
timestamp the X server than gets after receiving the request, due to the
fact that CLOCK_MONOTONIC_COARSE has a lower resolution.
To avoid these issues, make Xwayland always use CLOCK_MONOTONIC, so
that it becomes possible for Wayland compositor only supporting
CLOCK_MONOTONIC and X server to use the same clock.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The current SIGIO signal handler method, used at generation of input events,
has a bunch of oddities. This patch introduces an alternative way using a
thread, which is used to select() all input device file descriptors.
A mutex was used to control the access to input structures by the main and input
threads. Two pipes to emit alert events (such hotplug ones) and guarantee the
proper communication between them was also used.
Co-authored-by: Fernando Carrijo <fcarrijo@freedesktop.org>
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
v2: Fix non-Xorg link. Enable where supported by default.
This also splits out the actual enabling of input threads to
DDX-specific patches which follow
v3: Make the input lock recursive
v4: Use regular RECURSIVE_MUTEXes instead of rolling our own
Respect the --disable-input-thread configuration option by
providing stubs that expose the same API/ABI.
Respond to style comments from Peter Hutterer.
v5: use __func__ in inputthread debug and error mesages.
Respond to style comments from Peter Hutterer.
v6: use AX_PTHREAD instead of inlining pthread tests.
Suggested by Emil Velikov <emil.l.velikov@gmail.com>
v7: Use pthread_sigmask instead of sigprocmask when using threads
Suggested by Adam Jackson <ajax@redhat.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This removes all of the SIGIO handling support used for input
throughout the X server, preparing the way for using threads for input
handling instead.
Places calling OsBlockSIGIO and OsReleaseSIGIO are marked with calls
to stub functions input_lock/input_unlock so that we don't lose this
information.
xfree86 SIGIO support is reworked to use internal versions of
OsBlockSIGIO and OsReleaseSIGIO.
v2: Don't change locking order (Peter Hutterer)
v3: Comment weird && FALSE in xf86Helper.c
Leave errno save/restore in xf86ReadInput
Squash with stub adding patch (Peter Hutterer)
v4: Leave UseSIGIO config parameter so that
existing config files don't break (Peter Hutterer)
v5: Split a couple of independent patch bits out
of kinput.c (Peter Hutterer)
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
When NumLock is on and a new keymap is applied, the next modifier state
change will turn off that LED (but leave the state enabled). The cause
for this is a bit convoluted:
* the SLI explicitState is copied from the current state in
ProcXkbGetKbdByName. Thus, if NumLock is on, that state is 0x2.
* on the next modifier key press (e.g. Shift), XkbApplyState() calls into
XkbUpdateIndicators() -> XkbUpdateLedAutoState() to update SLIs (if any)
for the currently changed modifier. But it does so with a mask only for
the changed modifier (i.e. for Shift).
* XkbUpdateLedAutoState() calculates the state based on this mask and
ends up with 0 because we don't have a Shift LED and we masked out the
others.
* XkbUpdateLedAutoState() compares that state with the previous state
(which is still 0x2) and then proceeds to turn the LED off
This doesn't happen in the normal case because either the mask
encompasses all modifiers or the state matches of the masked-out
modifiers matches the old state.
Avoid this issue by forcing an SLI update after changing the keymap.
This updates the sli->effectiveState and thus restores everything to
happy working order.
https://bugzilla.redhat.com/show_bug.cgi?id=1047151
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
The tablet pads have been separate kernel devices for a while now and
libwacom has labelled them with the udev ID_INPUT_TABLET_PAD for over a year
now. Add a new MatchIsTabletPad directive to apply configuration options
specifically to the Pad part of a tablet.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
We had HAVE_POSIX_FALLOCATE checks, but no such macros were ever
defined anywhere. This commit makes it so that this macro is defined if
the posix_fallocate is detected during configure.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
git commit f175cf45:
vidmode: move to a separate library of its own
introduced a regression where the xserver would not build when
xf86vidmodeproto is not installed even if the configure option
"--disable-xf86vidmode" is specified.
Fix build failure when xf86vidmodeproto is not installed.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
This patch introduces a new flag ATTR_KEY for hotplugged input devices,
so we can better distinguish between real keyboards (i.e. devices with
udev property ID_INPUT_KEYBOARD="1") and other key input devices like
lid switches, power buttons, etc.
All supported hotplug backends (udev, hal, and wscons) will set both
flags ATTR_KEY and ATTR_KEYBOARD for real keyboards, but udev backend
will set ATTR_KEY, but not ATTR_KEYBOARD, for non-keyboard key input
devices (hal and wscons will set both flags in any case). With this
distinction, kdrive input hotplugging mechanism will be allowed to only
grab real keyboards, as other key input devices are currently not
supported.
In order to don't break current behaviour, this patch will replace all
ATTR_KEYBOARD occurrences with ATTR_KEY in hw/xfree86/common/xf86Xinput.c.
[ajax: Just add ATTR_KEY, don't re-number the other attributes]
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Laércio de Sousa <laerciosousa@sme-mogidascruzes.sp.gov.br>
XVidMode extension might be useful to non hardware servers as well (e.g.
Xwayand) so that applications that rely on it (e.g. lot of older games)
can at least have read access to XVidMode.
But the implementation is very XFree86 centric, so the idea is to add
a bunch of vfunc that other non-XFree86 servers can hook up into to
provide a similar functionality.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=87806
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
To be able to reuse the VidMode extension in a non-hardware server, the
display mode definitions need to be accessible from DIX.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
This is a variant of ClientSignal() that signals all clients with an
optional matching sleeping client, function and closure.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
216bdbc735 removed the SetRootClip call in the XWayland output-hotplug
handler when running rootless (e.g. as a part of Weston/Mutter), since
the root window has no storage, so generating exposures will result in
writes to invalid memory.
Unfortunately, preventing the segfault also breaks sprite confinement.
SetRootClip updates winSize and borderSize for the root window, which
when combined with RRScreenSizeChanged calling ScreenRestructured,
generates a new sprite-confinment area to update it to the whole screen.
Removing this call results in the window geometry being reported
correctly, but winSize/borderSize never changing from their values at
startup, i.e. out of sync with the root window geometry / screen
information in the connection info / XRandR.
This patch introduces a hybrid mode, where we update winSize and
borderSize for the root window, enabling sprite confinement to work
correctly, but keep the clip emptied so exposures are never generated.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
v2: Move initializing pos into the first clause of the for statement. We
have to keep this macro equivalent to a plain for statement from the
user's perspective, otherwise callers need to {} things to keep control
flow correct. [ajax]
Signed-off-by: Thomas Klausner <wiz@NetBSD.org>
Acked-by: Michel Dänzer <michel.daenzer@amd.com>
Fixes https://bugs.freedesktop.org/show_bug.cgi?id=93212
Previously all X servers started with -displayfd would overwrite
Xorg.0.log - now a temporary name of Xorg.pid-<pid>.log is used
until after -displayfd finds an open display - then it is renamed
to the traditional Xorg.<display>.log name.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Replace the custom path for dealing with new incoming connections with
the general-purpose NotifyFd API.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This provides a callback-based interface to monitor file
descriptors beyond the usual client and device interfaces.
Modules within the server using file descriptors for reading and/or
writing can call
Bool SetNotifyFd(int fd, NotifyFdProcPtr notify_fd, int mask, void *data);
mask can be any combination of X_NOTIFY_READ and X_NOTIFY_WRITE.
When 'fd' becomes readable or writable, the notify_fd function will be
called with the 'fd', the ready conditions and 'data' values as arguments,
When the module no longer needs to monitor the fd, it will call
void RemoveNotifyFd(int fd);
RemoveNotifyFd may be called from the notify function.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This allows the server to call GetTimeInMillis() after each request is
processed to avoid needing setitimer. -dumbSched now turns off the
setitimer.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Add a new event source type for keypress events synthesised from focus
notifications (e.g. KeymapNotify from the parent server, when running
nested). This is used to keep the keys-down array in sync with the host
server's, without sending actual keypress events to clients.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Eric Anholt
Laurent Carlier
Aaron Plattner
Adam Jackson
Lyude Paul
Thierry Reding
Nicolai Hähnle
Emil Velikov
Louis-Francis Ratté-Boulianne
Keith Packard
Kyle Brenneman
Roman Gilg
Jan Beich
Peter Harris
Daniel Martin
Jon Turney
Daniel Stone
Michel Dänzer
Qiang Yu
Matthieu Herrb
Peter Hutterer
Mihail Konev
Jonas Ådahl
Jeremy Huddleston Sequoia
Alan Coopersmith
Dave Airlie
Brian M. Clapper
Alex Goins
Hans de Goede
Dave Airlie
Olivier Fourdan
Laércio de Sousa
Chris Wilson
Thomas Klausner