Add a flag to DeviceEvents, giving the source of the event. Currently
this only supports a 'normal' flag, but will be used later to add a
'focus-in' flag, noting events synthesised from key/button arrays on
focus-in notifications.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Michael Stapelberg <stapelberg@google.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
There's nothing in configure to enable this, and KdTsPhyScreen isn't
defined anywhere.
[ajax: Rebase, also clean up Xfbdev]
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Jamey Sharp <jamey@minilop.net>
These extensions were accessing internal OS functions and
structures. Expose the necessary functionality to them and remove
their use of osdep.h
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Commit 4b4b9086 "os: support new implicit local user access mode [CVE-2015-3164
2/3]" carefully places the relevant code it adds under !NO_LOCAL_CLIENT_CRED,
but unfortunately doesn't notice that NO_LOCAL_CLIENT_CRED is defined as a
side-effect in the middle of GetLocalClientCreds(), so many of these checks
precede its definition.
Move the check if NO_LOCAL_CLIENT_CRED should be defined to configure.ac, so it
always occurs before it's first use.
v2:
Move check to configure.ac
v3:
Use AC_CACHE_CHECK and name cache varaible appropriately
[ajax: Massaged commit message]
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Ray Strode <rstrode@redhat.com>
ResourceClientBits() might be used by the modules as well, need to
mark the symbol as visible to that the linker can resolve it at
run time.
/usr/bin/X: symbol lookup error:
/usr/lib64/xorg/modules/extensions/libglx.so: undefined symbol:
ResourceClientBits
bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91763
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Make the maximum number of clients user configurable, either from the command
line or from xorg.conf
This patch works by using the MAXCLIENTS (raised to 512) as the maximum
allowed number of clients, but allowing the actual limit to be set by the
user to a lower value (keeping the default of 256).
There is a limit size of 29 bits to be used to store both the client ID and
the X resources ID, so by reducing the number of clients allowed to connect to
the X server, the user can increase the number of X resources per client or
vice-versa.
Parts of this patch are based on a similar patch from Adam Jackson
<ajax@redhat.com>
This now requires at least xproto 7.0.28
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This eliminates the duplicate declaration of dixGetGlyphs when
fontutil.h gets included after dixfont.h has defined GetGlyphs as
dixGetGlyphs.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Removes the last cpp conditional on ROOTLESS from dix code.
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
One of the lacking features with output offloading was
that screen rotation didn't work at all.
This patch makes 0/90/180/270 rotation work with USB output
and GPU outputs.
When it allocates the shared pixmap it allocates it rotated,
and any updates to the shared pixmap are done using a composite
path that does the rotation. The slave GPU then doesn't need
to know about the rotation and just displays the pixmap.
v2:
rewrite the sync dirty helper to use the dst pixmap, and
avoid any strange hobbits and rotations.
This breaks ABI in two places.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
We need this for doing USB offload scenarios using glamor
and modesetting driver.
unfortunately only gbm in mesa 10.6 has support for the
linear API.
v1.1: fix bad define
v2: update the configure.ac test as per amdgpu. (Michel)
set linear bos to external to avoid cache. (Eric)
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
I doubt anyone builds with this turned off or has done for a long
time.
It helps my eyes bleed slightly less when reading the code, I've left
the define in place as some drivers use it.
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
If the X server is started without a '-auth' argument, then
it gets started wide open to all local users on the system.
This isn't a great default access model, but changing it in
Xorg at this point would break backward compatibility.
Xwayland, on the other hand is new, and much more targeted
in scope. It could, in theory, be changed to allow the much
more secure default of a "user who started X server can connect
clients to that server."
This commit paves the way for that change, by adding a mechanism
for DDXs to opt-in to that behavior. They merely need to call
LocalAccessScopeUser()
in their init functions.
A subsequent commit will add that call for Xwayland.
Signed-off-by: Ray Strode <rstrode@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Allows a mask to carry both accelerated and unaccelerated motion at the same
time.
This is required for xf86-input-libinput where the pointer acceleration
happens in libinput already, but parts of the server, specifically raw events
and DGA rely on device-specific unaccelerated data.
To ease integration add this as a second set to the ValuatorMask rather than
extending all APIs to carry a second, possibly NULL set of valuators.
Note that a valuator mask should only be used in either accel/unaccel or
standard mode at any time. Switching requires either a valuator_mask_zero()
call or unsetting all valuators one-by-one. Trying to mix the two will produce
a warning.
The server has a shortcut for changing a mask with the
valuator_mask_drop_unaccelerated() call. This saves us from having to loop
through all valuators on every event, we can just drop the bits we know we
don't want.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Without this, AC_SYS_LARGEFILE doesn't actually have any effect.
Signed-off-by: Michel Dänzer <michel@daenzer.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Make sure X_BIG_ENDIAN/X_LITTLE_ENDIAN are defined before actually using
them.
Otherwise, image byte order could be wrong on big endian hardware even
though endianess detection is correct.
Reported-by: Tim Waugh <twaugh@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Uses reallocarray to perform integer overflow detection when allocating
an array, using NULL as the previous pointer to force a new allocation.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Wrapper for realloc() that checks for overflow when multiplying
arguments together, so we don't have to add overflow checks to
every single call. For documentation on usage, see:
http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man3/calloc.3
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Matt Turner <mattst88@gmail.com>
The xnfcalloc() macro took two arguments but simply multiplied them
together without checking for overflow and defeating any overflow
checking that calloc() might have done. Let's not do that.
The original XNFcalloc() function is left for now to preserve driver
ABI, but is marked as deprecated so it can be removed in a future round
of ABI break/cleanup.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Store the user-defined monitors in the RandR screen private.
Generate a list of monitors from both the user-defined ones and from
any outputs not mentioned in one of the user-defined monitors. This list
covers both the outputs in the main screen as well as any slaves.
v1.1: airlied: fix up primary skipping bug,
fix wrong height initialiser
add get_active flag from updated protocol.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
No longer used with the removal of the GL dispatch (glapi) from libglx a
few releases ago.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Make PseudoramiXExtensionInit() prototype available to hw/xwin
Rather than avoiding a reference to it being pulled in to Xorg by sdksyms by
hiding this prototype behind the INXQUARTZ define, which is only defined when
building Xquartz, introduce nonsdk_extinit.h and move it there.
(The only remaining use of INXQUARTZ is in mi/miiniext.c, in order
to do PseudoramiXExtensionInit() at the point apparently needed by Xquartz)
Also remove duplicate declaration of noPseudoramiXExtension from pseudoramiX.h
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Add _X_EXPORT to GetMaster function. It is required by tigervnc's VNC module.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Nothing was using it and if anyone had they would've gotten a warning and
noticed that it doesn't actually work. Drop this, it has been unused for years.
Input ABI 22
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Use typedefs to work around dtrace dropping const qualifiers from probe
arguments when generating Xserver-dtrace.h. Add new probes.h header to
avoid having to replicate these typedefs in every file with dtrace probes.
Gets rid of these warnings from gcc 4.8:
getevents.c:1096:9:
warning: passing argument 6 of '__dtrace_Xserver___input__event' discards
'const' qualifier from pointer target type [enabled by default]
getevents.c:1096:9:
warning: passing argument 7 of '__dtrace_Xserver___input__event' disards
'const' qualifier from pointer target type [enabled by default]
getevents.c:1651:9:
warning: passing argument 6 of '__dtrace_Xserver___input__event' disards
'const' qualifier from pointer target type [enabled by default]
getevents.c:1651:9:
warning: passing argument 7 of '__dtrace_Xserver___input__event' disards
'const' qualifier from pointer target type [enabled by default]
getevents.c:1791:9:
warning: passing argument 6 of '__dtrace_Xserver___input__event' disards
'const' qualifier from pointer target type [enabled by default]
getevents.c:1791:9:
warning: passing argument 7 of '__dtrace_Xserver___input__event' disards
'const' qualifier from pointer target type [enabled by default]
getevents.c:1921:9:
warning: passing argument 6 of '__dtrace_Xserver___input__event' disards
'const' qualifier from pointer target type [enabled by default]
getevents.c:1921:9:
warning: passing argument 7 of '__dtrace_Xserver___input__event' disards
'const' qualifier from pointer target type [enabled by default]
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
The CVE fix in:
commit 97015a07b9
Author: Alan Coopersmith <alan.coopersmith@oracle.com>
Date: Wed Jan 22 22:37:15 2014 -0800
dix: integer overflow in RegionSizeof() [CVE-2014-8092 3/4]
offended the C++ demons:
../../include/regionstr.h:147:45: error: invalid conversion from 'void*' to
'pixman_region16_data_t* {aka pixman_region16_data*}' [-fpermissive]
Normally this isn't a problem, because around here we have the sense and
common decency to not use C++, but this does make tigervnc fail to build,
which is a little rude of us.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The 'n' parameter must be surrounded by parens in both places to
prevent precedence from mis-computing things.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Multiple functions in the Xinput extension handling of requests from
clients failed to check that the length of the request sent by the
client was large enough to perform all the required operations and
thus could read or write to memory outside the bounds of the request
buffer.
This commit includes the creation of a new REQUEST_AT_LEAST_EXTRA_SIZE
macro in include/dix.h for the common case of needing to ensure a
request is large enough to include both the request itself and a
minimum amount of extra data following the request header.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Force use of 64-bit integers when evaluating data provided by clients
in 32-bit fields which can overflow when added or multiplied during
checks.
Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
RegionSizeof contains several integer overflows if a large length
value is passed in. Once we fix it to return 0 on overflow, we
also have to fix the callers to handle this error condition
v2: Fixed limit calculation in RegionSizeof as pointed out by jcristau.
Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
/usr/include/xorg/regionstr.h:130:36: warning: implicit conversion changes
signedness: 'int' to 'unsigned long' [-Wsign-conversion]
return (sizeof(RegDataRec) + ((n) * sizeof(BoxRec)));
^ ~
Really only just pushes the problem to the caller, but maybe that motivates
someone to fix it.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
/usr/include/xorg/misc.h:141:30: warning: implicit conversion loses integer
precision: 'int' to 'uint16_t' (aka 'unsigned short') [-Wconversion]
return ((x & 0xff) << 8) | ((x >> 8) & 0xff);
~~~~~~ ~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~
Function sig is a uint16_t, so just force the cast.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Again, this changes FixesCreateRegionFromGC to throw BadMatch when fed a
GC with no client clip.
v2: Fix Xnest and some variable names (Keith)
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
make -j 8 check was sporadically failing in different xi2 tests.
After adding the asserts in the previous commit to catch xkb failure
it became easier to catch the failures and see that multiple tests
were running at once trying to write to /tmp/server-(null).xkm and
then delete it, and interfering with each other.
Putting a unique string into the display variable let them each write
to their own file and not interfere with others.
v2: Fix Linux bits:
Add #include <errno.h> to get a declaration of
program_invocation_name on Linux.
Use only the last portion of the pathname so that the resulting
display name doesn't contain any slashes.
v3: use program_invocation_short_name on Linux
This is the same as program_invocation_name, except is has
stripped off any path prefix.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
No DDX is overriding this and it's fairly absurd to expose it as a
screen operation anyway.
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
A careful read shows that it was always NULL. It hasn't always been; as
the DDX spec indicates, it was the "occluded region that has backing
store", but since that backing store code is long gone, we can nuke it.
mi{,Overlay}WindowExposures get slightly simpler here, and will get even
simpler in just a moment.
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This disables the tcp listen socket by default. Then, it
uses a new xtrans interface, TRANS(Listen), to provide a command line
option to re-enable those if desired.
v2: Leave unix socket enabled by default. Add configure options.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The dtrace code in the server wants to log the name of each executed
request, which it gets from the registry. Use that as an additional
indication of when that portion of the registry should be included in
the server build.
See:
http://tinderbox.x.org/builds/2014-09-19-0003/logs/xserver/#build
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Dave Airlie <airlied@gmail.com>
Instead of making the inclusion of the registry code a global
conditional, split the registry into two pieces; the bits required by
the X-Resource extension (the resource names) and the bits required by
the XCSECURITY extension (the protocol names). Build each set of code
if the related extension is being built.
v2: Check for both XCSECURITY and XSELINUX.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Don't leave this file open during the whole server execution process;
close it once all of the extensions are initialized.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
pciaccess does this for us, and none of our internal hooks really
remain. This does remove a cleanup pass from the BSD code, but the case
it's covering (a previous server leaving MTRRs around) can't happen
anymore.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
For doing reverese optimus to multiple outputs on a secondary GPU
the GPU can store the blits into a large screen pixmap, unfortunately
this means we need a destination offset into the dirty code, so
add a new API that just adds this interface.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
Drivers don't get to use dix-config.h, they use xorg-server.h
instead. Add X_BYTE_ORDER to that file so drivers can see the value.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Now that servermd.h depends on X_BYTE_ORDER being defined in
dix-config.h or xorg-server.h, check to make sure one of those has
been included before using the value.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
A few files in the server are including xorg-server.h, which is only
for use by Xorg server drivers. This fixes those errors and then adds
a check to make sure it doesn't happen again.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The comment lies, shm hasn't used this code since:
commit fdef7be5c8
Author: Alan Coopersmith <alan.coopersmith@sun.com>
Date: Tue Oct 9 18:44:04 2007 -0700
Sun bug 6589829: include zoneid of shm segment in access [...]
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
At this point we have no architectures where image byte order is
different from bitmap bit order, or where either of those two are not
also the native word endianness. Hooray, one more place where we don't
have to worry about enabling new CPU architectures.
v2: Rebase to master to handle the addition of ppc64le, arc, and xtensa,
and use autoconf's endianness detection instead of gcc predefines.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
I really don't think this was ever correct, but I'm also not sure what
non-Linux Unix this was meant to enable. The only one I know of was
OS/390 / z/OS / OpenEdition, but I think that was big-endian too.
At any rate this is all about to go away, so this is just removing an
edge case.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This appears to be defining sparc if ever __sparc or __sparc__ were
defined, which is almost reasonable, but these days we want to be using
the __arch__ style. Why any of this would ever be triggered on m68k is
truly a mystery for the ages.
v2: Fix commit message, as noted by nix
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This effectively no longer varied across architectures anyway.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
These macros meant something in cfb, but not in fb.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Every other architecture sets this to 32, and I can't think of any
benefit s390 would derive from changing it. It is, at any rate,
something the client already copes with, and the only internal code
impact seems to be some complicated math in miGetPlane, which you never
hit if you're using fb.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Whatever unix this was meant to be is either no longer in circulation,
or is AIX, which we don't claim to support anyway.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
OdevAttributes are a fixed set of values with known types; instead of
storing them in a linked list and requiring accessor/settor functions,
replace the list header, struct OdevAttributes, with a struct that
directly contains the values. This provides for compile-time
typechecking of the values, eliminates a significant amount of code
and generally simplifies using this datatype.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This adds a large comment to include/scrnintstr.h which should serve
to document the correct way to wrap any screen procedure, with a
particular focus on how to dynamically add/remove wrapping layers
while the server is running.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Even though -Wcomment doesn't mind it (in gcc or clang), the appearance
of */* confuses the syntax highlighter of some editors (eg. vim), and
causes warnings in MSVC.
Signed-off-by: Peter Harris <pharris@opentext.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Don't allow setting string attributes to integers and vice versa.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Looks like the value of ODEV_ATTRIB_DRIVER was not updated when the patch
adding it got rebased on top of a newer server version.
This fixes the xserver crashing when systemd-logind integration is used.
https://bugzilla.redhat.com/show_bug.cgi?id=1118540
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
When opening a DRM device, query the version and store the driver name
as a new attribute for future reference.
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Tested-By: Aaron Plattner <aplattner@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Tested-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
So far PPC was big endian for sure. For ppc64le this is no longer
true.
Signed-off-by: Egbert Eich <eich@freedesktop.org>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
The easiest way to check for the version of an extension is to send the maximum
possible version numbers in the QueryVersion request. The X server overflows on
these as it assumes you will send a reasonable version number.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Commit f37a469134 removed this from
xwin-config.h.in for some reason, but it is used.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Xorg server could be built for and run on Synopsys DesignWare ARC cores.
These changes are required for successful building and execution of the server.
Both little-endian and big-endian flavors of ARC cores are supported.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Acked-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Egbert Eich <eich@freedesktop.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
We can only request one fd per device from systemd-logind. If a fd is re-used
by the same device, releasing the fd from one device doesn't mean we can close
it. The systemd code knows when it's really released, so let it close the fd.
Test case: xorg.conf section for an input device with hotplugging enabled.
evdev detects the duplicate and closes the hotplugged device, which closes the
fd. The other instance of evdev thinks the fd is still valid so now you're
playing a double lottery. First, which client(s) will get the evdev fd?
Second, which requests will be picked up by evdev and which ones will be
picked up by the client? You'll never know, but the fun is in finding out.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The attack surface for indirect GLX is huge, and it's of no use to
most people (if you get an indirect GL context, you're better served
by a immediate X error than actually trying to use an indirect GL
context and finding out that it doesn't support doing anything you
want, slowly). This flag gives you a chance to disable indirect GLX
in environments where you just don't need it.
I put in both the '+' and '-' arguments right now, so that it's easy
to patch the value to change the default policy.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
GLX is trying to track whether the context it wants is current, to
avoid the glFlush() (and the rest of the overhead) that occurs on all
MakeCurrent calls. However, its cache can be incorrect now that
glamor exists. This is a step toward getting glamor to coordinate
with GLX.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This hook allows drivers to be notified when a pixmap gains a new ID.
(ABI break.)
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
When no logfile was specified (xf86LogFileFrom == X_DEFAULT) and we're not
running as root log to $XDG_DATA_HOME/xorg/Xorg.#.log as Xorg won't be able to
log to the default /var/log/... when it is not running as root.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This allows DDXen to override the window picking to account for
native windows not seen by the X server. The bulk of the picking logic
is exposed as a new helper function, miSpriteTrace(). This function
completes the sprite trace filled out by the caller, and can be set up
to start the search from a given toplevel window.
v2: Leave existing XYToWindow API in place for API compatibility
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Rather then a full path prefix, this is a preparation patch for adding
support for logging to another location when not running as root.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Handle -displayfd and an explicit display number sensibly, e.g. use the
explicitly specified display number, and write it to the displayfd
v2: displayfd might be 0, so use -1 as invalid value
v3: Rebase for addition of NoListenAll flag
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Looping around LoadExtension() meant that ExtensionModuleList was reallocated
on every extension. Using LoadExtensionList() we pass an array thus the
function can do the reallocation in one go, and then loop and setup the
ExtensionModuleList.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
v2: Update ephyr [Keith Packard]
v3: Eliminate const warnings in LoadExtensionList [Keith Packard]
Signed-off-by: Keith Packard <keithp@keithp.com>
Removed in d35a02a767, tigervnc 1.2.80 and
xf86-video-nested need it for now.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
When the Xwayland server is socket-activated, we need to connect and
initialize the window manager before the activating client gets to
proceed with connecting. We do this by passing a socket file
descriptor for the window manager connection to the Xwayland server,
which then uses this new function to set it up as an X client.
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Without these, after commit fdb4ec86c2, it fails to build on Solaris,
with errors of:
xf86Xinput.c: In function 'xf86stat':
xf86Xinput.c:816:5: error: implicit declaration of function 'major' [-Werror=implicit-function-declaration]
xf86Xinput.c:817:5: error: implicit declaration of function 'minor' [-Werror=implicit-function-declaration]
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
A socket-activated server will receive its listening sockets from the
parent process and should not create its own sockets. This patch
introduces a NoListen flag that can be set by a DDX to prevent
the server from creating the sockets. When NoListen is enabled, we
also disable the server lock checking, since the parent process is
responsible for checking the lock before picking the display name and
creating the sockets.
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
This function was written to allow the X server to inherit the listen
socket from launchd on OS X. The code is not specific to OS X though
and will be useful for on-demand launched Xwayland servers.
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
config_odev* functions are called in code-paths were we already use
XNF* functions in other places, so which are not oom safe already.
Besides that oom is something which should simply never happen, so aborting
when it does is as good a response as any other.
While switching to XNF functions also fixup an unchecked strdup case.
Note the function prototypes are kept unchanged, as they are part of the
server ABI.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
With the recent systemd-logind changes it is possible to install the Xorg
binary without suid root rights and still have everything working as it
should *if* the user only has cards which are supported by kms.
This commit adds a little suid root wrapper, which is a bit weird, first we
strip the suid-root bit of the Xorg binary, and then we add a wrapper ?
The function of this wrapper is to see if a system still needs root-rights,
if it does not (it supports kms and the kms drivers are properly loaded),
then it will immediately drop all elevated rights before executing the real
Xorg binary. If it finds (some) cards which don't support kms, or no cards
at all, then it will execute the Xorg server with elevated rights so that
ie the nvidia binary driver and the vesa driver can keep working normally.
To make it possible for security concious users who don't need the root
rights to completely remove the wrapper, Xorg is started in a 3 step process
when the wrapper is enabled during build time:
1) A simple shell script which checks if the wrapper is there, if it is
it executes the wrapper, if not it directly executes the real Xorg binary
2) The wrapper gets executed, does its checks, normally drops all elevated
rights and then executes the real Xorg binary
3) The real Xorg binary does its thing
This allows distributions to put the wrapper binary in a separate package, and
will allow users to remove this package. IE the plan with Fedora is to make
"legacy" drivers depend on the wrapper pkg, and since our default install
contains some legacy drivers it will be part of the default install, but
users can later yum remove it (which will also automatically remove the
legacy driver packages as those won't work without it anyways).
The wrapper is loosely modelled after the existing Debian Xwrapper, it
uses the same config-file + config-file format, and also allows restricting
Xserver execution (through the wrapper) to console users only.
There also is a new needs_root_rights config file directive, which can
be used to override the auto-detection the wrapper does.
Hopefully this will allow Debian to replace their own wrapper with this
upstream one.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This will also make it useful for cases when we have a new keymap to
apply to a device but don't have a source device.
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Whenever the master changes, push the locked modifier state to the attached
slave devices, then update the indicators. This way, when NumLock or CapsLock
are hit on any device, the LED will light up on all devices. Likewise, a new
keyboard attached to a master device will light up with the correct
indicators.
The indicators are handled per-keyboard, depending on the layout, i.e. if one
keyboard has grp_led:num set, the NumLock LED won't light up on that keyboard.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
on tinderbox and irc
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Matthieu Herrb <matthieu@herrb.eu>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This is not exposing the API we want long term, but it should get
existing DDX drivers up and running while we massage the API into
shape.
v2: Use LIBADD instead of LDFLAGS to fix deps on libglamor.la, and use
version 0.5.1 (the point it was forked from the external repo).
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This commits add the bulk of the systemd-logind integration code, but does
not hook it up yet other then calling its init and fini functions, which
don't do that much.
Note the configure bits check for udev since systemd-logind use will only be
supported in combination with udev. Besides that it only checks for dbus
since all communication with systemd-logind is happening over dbus, so
no further libs are needed.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
With systemd-logind support, the xserver, rather than the drivers will be
responsible for opening/closing the fd for drm nodes.
This commit adds a fd member to OdevAttributes to store the fd to pass it
along to the driver.
systemd-logind tracks devices by their chardev major + minor numbers, so
also add OdevAttributes to store the major and minor.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
The OdevAttributes struct should just be a head of the attributes list, and
not contain various unrelated flags. Instead add a flags field to
struct xf86_platform_device and use that.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Add a couple of new functions for dealing with storing integer values into
OdevAttributes.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Add a config_odev_get_attribute helper, and replace the diy looping over all
the attributes done in various places with calls to this helper.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Caused Solaris Studio cc to complain in every file which included it:
"../include/eventstr.h", line 179: warning: syntax error:
empty member declaration
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
No functional changes, just making a better case for why MAP_LENGTH is 256.
"But can't we remove MAP_LENGTH then?" I hear you say? "Why, yes. Go for it!"
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Fallout from fecc7eb1cf, and reverts most of the
rest of that patch.
The device name is allocated and may even change during PreInit. The const
warnings came from the test codes, the correct fix here is to fix the test
code.
touch.c: In function ‘touch_init’:
touch.c:254:14: warning: assignment discards ‘const’ qualifier from pointer target type [enabled by default]
dev.name = "test device";
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This reverts commit d0339a5c66.
seriously, what the fuck? Are we making xstrdup() return a const char now too?
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Introduced in fecc7eb1cf and reverts most of
that but it's helpfully mixed with other stuff.
InputAttributes are not const, they're strdup'd everywhere but the test code
and freed properly. Revert the const char changes and fix the test up instead.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Just forcing everything to const char* is not helpful, compiler warnings are
supposed to warn about broken code. Forcing everything to const when it
clearly isn't less than ideal.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
With systemd-logind the dbus-core will be used for more then just config, so
it should be possible to build it even when using a non dbus dependent config
backend.
This patch also removes the config_ prefix from the dbus-core symbols.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
This API has been disabled by default since 1.4, the first release it came in.
There a no known users of it and even its direct replacement (HAL) has
been superseeded by udev on supported platforms since 1.8.
This code is untested, probably hasn't been compiled in years and should not
be shipped.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Just like the pointer type from Xdefs.h, the Pointer type from
XIproto.h collides with local declarations of variables using the same
name. XIproto.h can use _XITYPEDEF_POINTER to avoid declaring the
unnecessary pointer type.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
For now we're just building an uninstalled library. The extra EGL
stubs are required so that we can get the DIX building and usable
without pulling in the xf86 DDX code in glamor_egl.c.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Zhigang Gong <zhigang.gong@linux.intel.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
A client which is ready, but hasn't run for a while, should receive
the same benefit as one which has simply been idle for a while. Use
the smart_stop_tick to see how long it has been since a client has
run instead of smart_check_tick, which got reset each time a client
was ready, even if it didn't get to run.
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
This signals to the fontsproto code that the X server has been fixed
to allow the name member in a FontPathElement struct to be declared
const to eliminate piles of warnings when assigning string constants
to them.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This lets us stop using the 'pointer' typedef in Xdefs.h as 'pointer'
is used throughout the X server for other things, and having duplicate
names generates compiler warnings.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Lots more const char stuff.
Remove duplicate defs of CoreKeyboardProc and CorePointerProc from
test/xi2/protocol-common.c
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
As usual, mostly const char changes. However, filter_device_events had
a potentially uninitialized value, 'raw', which I added a bunch of
checks for. I suspect most of those are 'can't happen', but it's hard
to see that inside the function.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
We want to advertise the version we implement, not the version the
protocol headers happen to describe.
Reviewed-by: Jasper St. Pierre <<jstpierre@mecheye.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
We want to advertise the version we implement, not the version the
protocol headers happen to describe.
Reviewed-by: Jasper St. Pierre <<jstpierre@mecheye.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Applications may end up allocating a bunch of shmfence objects, each
of which uses a file descriptor, which must be kept open lest some
other client ask for a copy of it later on.
Lacking an API that can turn a memory mapping back into a file
descriptor, about the best we can do is push the file descriptors out
of the way of other X clients so that we don't run out of the ability
to accept new connections.
This uses fcntl F_GETFD to push the FD up above MAXCLIENTS.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
By default, this looks through a list of directories to find one which
exists, but can be overridden with --with-shared-memory-dir=PATH
This patch doesn't actually do anything with this directory, just
makes it available in the configuration
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
VNC needs key_is_down to check if a key is processed as down before it
simulates various key releases. Make it available, because I seriously can't
be bothered thinking about how to rewrite VNC to not need that.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Keith Packard <keithp@keithp.com>
shmint.h is part of sdk_HEADERS, and so can't use anything not
included in sdk_HEADERS.
busfault.h includes dix-config.h which is not. Leave the use of
struct busfault in shmint.h and move the include of busfault.h to
shm.c.
protocol-versions.h is not part of sdk_HEADERS, so instead of using
that, just use XTRANS_SEND_FDS to choose whether to expose the fd
passing requests directly.
Reported-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Tested-by: Knut Petersen <Knut_Petersen@t-online.de>
Reviewed-by: Julien Cristau <jcristau@debian.org>
v2: also avoid using protocol-versions.h
Requires passing through the __EXTENSIONS__ and _XOPEN_SOURCE defines
in order to expose the msg_control members in struct msghdr.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
req_fds and SetReqFds in include/dixstruct.h
ReadFdFromClient, WriteFdToClient and the FD flushing in os/io.c
Signed-off-by: Keith Packard <keithp@keithp.com>
If a client passes a section of memory via file descriptor and then
subsequently truncates that file, the underlying pages will be freed
and the addresses invalidated. Subsequent accesses to the page will
fail with a SIGBUS error.
Trap that SIGBUS, figure out which segment was causing the error and
then allocate new pages to fill in for that region. Mark the offending
shared segment as invalid and free the resource ID so that the client
will be able to tell when subsequently attempting to use the segment.
Signed-off-by: Keith Packard <keithp@keithp.com>
v2: Use MAP_FIXED to simplify the recovery logic (Mark Kettenis)
v3: Also catch errors in ShmCreateSegment
Conflicts:
include/dix-config.h.in
include/xorg-config.h.in
Check to see if xtrans FD passing is available and use that to
advertise the appropriate version of the SHM extension
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Until other operating systems have a libXtrans port for FD passing,
disable this on non-Linux systems.
Note that this define affects how libXtrans gets built into the X
server, which is why it need only define the symbol
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This gets the server to link with xshmfence again, and also ensures
that the miSyncShm code is linked into the server with the reference
from sdksyms.
Signed-off-by: Keith Packard <keithp@keithp.com>
APM support in the Xserver was used to restore the console mode
prior to a power management event. This was to ensure the mode
upon suspend/resume was one that the system firmware or kernel
could deal with.
APM support is now largely obsolete, KMS drivers don't require a
mode restoration anyhow. Therefore it should be possible to disable
this feature.
(small modification by keithp - move test for XF86PM flag after check
for APM, then move XF86PM flag to xorg-config.h.in)
Signed-off-by: Egbert Eich <eich@freedesktop.org>
Tested-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Provides both a software implementation using timers and driver hooks
to base everything on vblank intervals.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Adds DRM compatible fences using futexes.
Uses FD passing to get pixmaps from DRM applications.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This passes a file descriptor from the client to the server, which is
then mmap'd
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This adds two interfaces:
void SetReqFds(ClientPtr client, int req_fds)
Marks the number of file descriptors expected for this
request. Call this before any request processing so that
any un-retrieved file descriptors will be closed
automatically.
int ReadFdFromClient(ClientPtr client)
Reads the next queued file descriptor from the connection. If
this request is not expecting any more file descriptors, or
if there are no more file descriptors available from the
connection, then this will return -1.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This allocates a new region structure and copies a source region into
it in a single API rather than forcing the caller to do both steps themselves.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The time between the idle reset and the IdleTimeWakeupHandler to be called is
indeterminate. Clients with an PositiveTransition or NegativeTransition alarm
on a low threshold may miss an alarm.
Work around this by keeping a reset flag for each device. When the
WakeupHandler triggers and the reset flag is set, we force a re-calculation of
everything and pretend the current idle time is zero. Immediately after is the
next calculation with the real idle time.
Relatively reproducible test case: Set up a XSyncNegativeTransition alarm for
a threshold of 1 ms. May trigger, may not.
X.Org Bug 70476 <http://bugs.freedesktop.org/show_bug.cgi?id=70476>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
And now that we have the accessors, localize it. No functional changes, just
preparing for a future change.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
It's already not optional at configure time, this just makes it so at
build time too.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
In particular, Bool. This is not an ABI break:
/usr/include/X11/Xdefs.h:typedef int Bool;
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Otherwise things like EMASKSIZE * foo will yield interesting results.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Replace hardcoded SVR4 || linux || CSRG_BASED with an autoconf check and
the _POSIX_SAVED_IDS macro.
Suggested-by: Mark Kettenis <mark.kettenis@xs4all.nl>
Signed-off-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
grab->type is only non-zero for passive grabs. We're checking an active grab
here, so we need to check if the touch mask is set on the grab.
Test case: grab the device, then start two simultaneous touches. The
grabbing client won't see the second touchpoints because grab->type is 0
and the second touch is not an emulating pointer.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Fixes a build failure on debian's udeb builds.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Too many callers relied on the refcnt being handled correctly. Use a simple
wrapper to handle that case.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Obsolete since 4bc2761ad5. This struct
existed so copying a passive grab could be simply done by
activeGrab = *grab
and thus have a copy of the GrabPtr we'd get from various sources but still
be able to check device->grab for NULL.
Since 4bc2761 activeGrab is a pointer itself and points to the same memory
as grabinfo->grab, leaving us with the potential of dangling pointers if
either calls FreeGrab() and doesn't reset the other one.
There is no reader of activeGrab anyway, so simply removing it is
sufficient.
Note: field is merely renamed to keep the ABI. Should be removed in the
future.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
A sync grab is the owner once it gets events. If it doesn't replay the
event it will get all events from this touch, equivalent to accepting it.
If the touch has ended before XAllowEvents() is called, we also now need to
send the TouchEnd event and clean-up since we won't see anything more from
this touch.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If a device is frozen in results to a grab, we need to enqueue the events.
This makes things complicated, and hard to follow since touch events are now
replayed in the history, pushed into EnqueueEvent, then replayed later
during PlayReleasedEvents in response to an XAllowEvents.
While the device is frozen, no touch events are processed, so if there is a
touch client with ownership mask _below_ the grab this will delay the
delivery and potentially screw gesture recognition. However, this is the
behaviour we have already anyway if the top-most client is a sync pgrab or
there is a sync grab active on the device when the TouchBegin was generated.
(also note, such a client would only reliably work in case of ReplayPointer
anyway)
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
DeleteCallbackManager() introduced for better symmetry in the caller, they
do the same thing.
==20085== 24 bytes in 1 blocks are still reachable in loss record 11 of 103
==20085== at 0x4C2A4CD: malloc (vg_replace_malloc.c:236)
==20085== by 0x43A097: CreateCallbackList (dixutils.c:837)
==20085== by 0x43A1D3: AddCallback (dixutils.c:869)
==20085== by 0x4B1736: GEExtensionInit (geext.c:209)
==20085== by 0x41C8A8: InitExtensions (miinitext.c:389)
==20085== by 0x5AC918: main (main.c:208)
==2042== 8 bytes in 1 blocks are still reachable in loss record 2 of 97
==2042== at 0x4C2A4CD: malloc (vg_replace_malloc.c:236)
==2042== by 0x4C2A657: realloc (vg_replace_malloc.c:525)
==2042== by 0x4802F5: XNFrealloc (utils.c:1095)
==2042== by 0x43A17A: CreateCallbackList (dixutils.c:855)
==2042== by 0x43A1EF: AddCallback (dixutils.c:870)
==2042== by 0x4B1752: GEExtensionInit (geext.c:209)
==2042== by 0x41C8A8: InitExtensions (miinitext.c:389)
==2042== by 0x5AC9E4: main (main.c:208)
==2042==
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Heaps of these:
==2042== 15,360 bytes in 120 blocks are still reachable in loss record 94 of
97
==2042== at 0x4C2A4CD: malloc (vg_replace_malloc.c:236)
==2042== by 0x4C2A657: realloc (vg_replace_malloc.c:525)
==2042== by 0x45FB91: double_size (registry.c:65)
==2042== by 0x45FC97: RegisterRequestName (registry.c:85)
==2042== by 0x460095: RegisterExtensionNames (registry.c:179)
==2042== by 0x460729: dixResetRegistry (registry.c:334)
==2042== by 0x5AC992: main (main.c:201)
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
==2547== 1 bytes in 1 blocks are still reachable in loss record 1 of 111
==2547== at 0x4C2A4CD: malloc (vg_replace_malloc.c:236)
==2547== by 0x64D1551: strdup (strdup.c:43)
==2547== by 0x4802FB: Xstrdup (utils.c:1113)
==2547== by 0x585B6C: XkbSetRulesUsed (xkbInit.c:219)
==2547== by 0x58700F: InitKeyboardDeviceStruct (xkbInit.c:595)
==2547== by 0x419FA3: vfbKeybdProc (InitInput.c:74)
==2547== by 0x425A3D: ActivateDevice (devices.c:540)
==2547== by 0x425F65: InitAndStartDevices (devices.c:713)
==2547== by 0x5ACA57: main (main.c:259)
and a few more of the above.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
We don't want to hotplug output devices while we are VT switched,
as we get races between multiple X servers on the device open, and
drm device master status. This just queues device opens until we return
from VT switch.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Otherwise this file is emitted in every unit that includes it.
Signed-off-by: Robert Morell <rmorell@nvidia.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
e02f864fdf "Suppress cursor display until the first XDefineCursor() request"
disabled cursor display a priori unless -retro is given.
On a plain server, caling XFixesHideCursor() and XFixesShowCursor() would
show the default root cursor, despite no client actually defining a cursor.
Change the logic, disable CursorVisible by default and only enable it from
the window's CWCursor logic. If no window ever defines a cursor, said cursor
stays invisible.
X.Org Bug 58398 <http://bugs.freedesktop.org/show_bug.cgi?id=58398>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Bastien Nocera <hadess@hadess.net>
Reviewed-by: Daniel Martin <consume.noise@gmail.com>
If we're about to abort, we're already in the signal handler and cannot call
down to the default device cleanup routines (which reset, free, alloc, and
do a bunch of other things).
Add a new DEVICE_ABORT mode to signal a driver's DeviceProc that it must
reset the hardware if needed but do nothing else. An actual HW reset is only
required for some drivers dealing with the HW directly.
This is largely backwards-compatible, hence the input ABI minor bump only.
Drivers we care about either return BadValue on a mode that's not
DEVICE_{INIT|ON|OFF|CLOSE} or print an error and return BadValue. Exception
here is vmmouse, which currently ignores it and would not reset anything.
This should be fixed if the reset is required.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The transformation matrix we previously stored was a scaled matrix based on
the axis ranges of the device. For relative movements, the scaling is not
required (or desired).
Store two separate matrices, one as requested by the client, one as the
product of [scale . matrix . inv_scale]. Depending on the type of movement,
apply the respective matrix.
For relative movements, also drop the translation component since it doesn't
really make sense to use that bit.
Input ABI 19
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
For absolute events, if the client specifies a screen number offset the
coordinates by that. And add a new flag so we know when _not_ to add the
screen offset in GPE.
Without this offset and the flag, GPE would simply add the offset of the
current screen if POINTER_SCREEN is set.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
This was accidentally excluded when we added barriers.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
inputstr, double defines TouchListener typedef, maybe some gcc handles it,
but not all.
fixes tinderbox
Reported-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
This is the lazy man's %f support. Print the decimal part of the number,
then append a decimal point, then print the first two digits of the
fractional part. So %f in sigsafe printing is really %.2f.
No boundary checks in place here.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
RELOCATE_PROJECTROOT is AC_DEFINED in configure.ac, but currently has no effect
as it doesn't appear in any AC_CONFIG_HEADER header.
When packaged for Windows, we do not have a unix-style filesystem tree, where
file needed by the X server can be found in fixed, absolute paths under the
prefix (PROJECTROOT).
Instead, the filesystem tree containing files needed by the X server and clients
will be installed with the directory containing the X server executable as the
root directory of that tree.
(Typically, this will be in the Program Files directory, which does not have a
fixed name, as it can be moved, localized, or added to to indicate x86 or x64
binaries)
So, RELOCATE_PROJECTROOT is used to make a native Windows build of the X server
look for various files (fonts, xkb data) in locations relative to the X server
rather than at absolute paths, by translating those paths at run-time.
Additionally the XKEYSYMDB, XERRORDB, XLOCALEDIR env vars checked by libX11 are
set appropriately for clients started by the X server.
Signed-off-by: Ryan Pavlik <rpavlik@iastate.edu>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Instead of guessing what resource type the listener is and what property to
retrieve, store the resource type in the listener directly.
Breaks XIT test cases:
TouchGrabTestMultipleTaps.PassiveGrabPointerEmulationMultipleTouchesFastSuccession
Fixes https://bugs.freedesktop.org/show_bug.cgi?id=56557
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Chase Douglas <chase.douglas@ubuntu.com>
This places a pointer to the grab related to a TouchListener directly
in the TouchListener structure rather than hoping to find the grab
later on using the resource ID.
Passive grabs have resource ID in the resource DB so they can be
removed when a client exits, and those resource IDs get copied when
activated, but implicit grabs are constructed on-the-fly and have no
resource DB entry.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
No reason to have a struct declared inside another struct
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Commit 31bf81772e changed the clientState field
from a signed int to a signed int 2-bit bitfield. The ClientState enum that is
expected to be assigned to this field has four values: ClientStateInitial (0),
ClientStateRunning (1), ClientStateRetained (2), and ClientStateGone (3).
However, because this bitfield is signed, ClientStateRetained becomes -2 when
assigned, and ClientStateGone becomes -1. This causes warnings:
test.c:54:10: error: case label value exceeds maximum value for type [-Werror]
test.c:55:10: error: case label value exceeds maximum value for type [-Werror]
The code here is a switch statement:
53 switch (client->clientState) {
54 case ClientStateGone:
55 case ClientStateRetained:
56 [...]
57 break;
58
59 default:
60 [...]
61 break;
62 }
It also causes bizarre problems like this:
client->clientState = ClientStateGone;
assert(client->clientState == ClientStateGone); // this assert fails
Also change the signedness of nearby bitfields to match.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Colin Harrison <colin.harrison at virgin.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Conflicts:
Xi/xichangehierarchy.c
Small conflict with the patch from
Xi: don't use devices after removing them
Was easily resolved by hand.
Signed-off-by: Keith Packard <keithp@keithp.com>
The AC_C_TYPEOF adds a #undef typeof to its autogenerated config.h.in
template, but b8ab93dfbc didn't copy that to dix-config.h.in
when HAVE_TYPEOF was, so the macro could claim typeof support but not
make it work, when used with compilers like Solaris Studio 12.1 which
only recognize it as __typeof__.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Instead of having the pointer barrier code enqueue events separately from
GetPointerEvents, pass the event list through and let it add to it.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
This adds support for clients that would like to get a notification
every time a barrier is hit, and allows clients to temporarily release
a barrier so that pointers can go through them, without having to
destroy and recreate barriers.
Based on work by Chris Halse Rogers <chris.halse.rogers@canonical.com>
Signed-off-by: Jasper St. Pierre <jstpierre@mecheye.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Rather than riding on the ConstrainCursorHarder hook, which has
several issues, move to an explicit hook, which will help us with
some RANDR interaction issues.
Signed-off-by: Jasper St. Pierre <jstpierre@mecheye.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
For touch selection conflicts, we need to check not only if the mask is set
for the device, but if it is set for only that specific device (regardless
of XIAll*Devices)
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
eventType is set for the type that triggered a XkbControlsNotify event.
Technically, SlowKeys is triggered by a timer which doesn't have a matching
core event type. So we used to use 0 here.
Practically, the timer is triggered by a key press + hold and cancelled when
the key is released before the timeout expires. So we might as well set
KeyPress (keycode) in the ControlsNotify to give clients a chance to differ
between timer-triggered SlowKeys and client-triggered ones.
This is a chance in behaviour, though I suspect with little impact.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Daniel Stone <daniel@fooishbar.org>
Unfortunately this also got lost in the extmod fallout, leaving the DMX
server not exposing the DMX or GLX extensions.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
DDXTouchPointInfoRec.valuators used to store axis values after transform.
This resulted in Coordinate Transformation Matrix
being applied multiple times to the last coordinates,
in the case when only pressure changes in the last touch event.
Changed DDXTouchPointInfoRec.valuators to store values before transform.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=49347
Signed-off-by: Yuly Novikov <ynovikov@chromium.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
As before GetTouchEvents causes unwanted side effects. Add a new
function GetDixTouchEnd, which generates a touch event from the touch
point. We fill in the event's screen coordinates from the MD's current
sprite position.
Signed-off-by: Thomas Jaeger <ThJaeger@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
GetTouchEvents has plenty of side effects such as moving the pointer or
updating the master device, which we don't want to happen when
replaying. The only reason for calling it was to generate a DCCE event,
but GetTouchEvents doesn't even do that right (we might need a DCCE
event even when replaying a master event, or clients could interpret
valuator data incorrectly).
This discussion is moot at the moment anyway, since DeliverTouchEvents
doesn't appear to deliver DCCE events.
Signed-off-by: Thomas Jaeger <ThJaeger@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
[Added call to processInputProc instead of direct call to DeliverTouchEvents]
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
No-one uses this - not xkbcomp, not GNOME, not KDE. The preferred way
to deal with component listing (which gives you RMLVO rather than
KcCGST) is to use the XML files on the client side.
Indeed, a couple of hours after making this commit, it emerged that all
*.dir files built with xkbcomp 1.1.1 (released two years ago) and later
have been catastrophically broken and nearly empty. So I think that's
reasonable proof that no-one uses them.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The double_to_f1616() functions do the same thing, and they're tested.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
libnettle is smaller than libgcrypt, currently being released more
frequently, and has replaced the latter in gnutls-3.x (which is used
by TigerVNC, so they can avoid pulling in two crypto libraries
simultaneously).
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
dispatch.c: In function 'ProcCopyArea':
dispatch.c:1608:5: warning: declaration of 'rc' shadows a previous local
dispatch.c:1604:9: warning: shadowed declaration is here
dispatch.c: In function 'ProcCopyPlane':
dispatch.c:1647:5: warning: declaration of 'rc' shadows a previous local
dispatch.c:1643:9: warning: shadowed declaration is here
events.c: In function 'GetClientsForDelivery':
events.c:2030:68: warning: declaration of 'clients' shadows a global declaration
../include/dix.h:124:28: warning: shadowed declaration is here
events.c: In function 'DeliverEventToWindowMask':
events.c:2113:19: warning: declaration of 'clients' shadows a global declaration
../include/dix.h:124:28: warning: shadowed declaration is here
events.c: In function 'EventSuppressForWindow':
events.c:4420:12: warning: declaration of 'free' shadows a global declaration
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
These functions are already declared in <X11/fonts/fontproto.h>.
Redeclaring them just for _X_EXPORT causes tons of warnings throughout
xserver, but they need to be declared somewhere to be picked up by
sdksyms.sh. Doing so in a private header limits the warnings to
sdksyms.c; fixing those as well would require changes to fontsproto.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
ABS_MT_DISTANCE exists since kernel v2.6.38,
ABS_MT_TOOL_X|Y appeared in v3.6.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Otherwise:
* We can't end the touches while device is disabled
* New touches after enabling the device may erroneously be mapped to old
logical touches
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
InitOutput.c: In function ‘OsVendorInit’:
InitOutput.c:630:29: warning: assignment left-hand side might be a candidate for a format attribute [-Wmissing-format-attribute]
winprocarg.c: In function ‘ddxProcessArgument’:
winprocarg.c:231:29: warning: assignment left-hand side might be a candidate for a format attribute [-Wmissing-format-attribute]
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
This hack was added to suppress events generated by Composite's internal
unmap/map cycle on redirection state change. Since that cycle was
removed in 193ecc8b4, these can go.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Ville Syrjälä <syrjala@sci.fi>
Signed-off-by: Keith Packard <keithp@keithp.com>
Pick smaller types where possible, including bitfielding some Bools and
small enums, then shuffle the result to be hole-free. 192 -> 128 bytes
on LP64, 144 -> 96 bytes on ILP32.
Signed-off-by: Adam Jackson <ajax@redhat.com>
this is a simple clean-up that is useful to stop further propogation
of this construct.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Some compilers have difficulty with the previous implementation which
relies on undefined behavior according to the C standard. Using
offsetof() from <stddef.h> (which most likely just uses
__builtin_offsetof on modern compilers) allows us to accomplish this
without ambiguity.
This fix also requires support for typeof(). If your compiler does not
support typeof(), then the old implementation will be used. If you see
failures in test/list, please try a more modern compiler.
v2: Added fallback if typeof() is not present.
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
We've had reports of two copies of the GLX bits, one in the server
and one in libglx.so causing problems, I didn't understand why the
X server needed a copy so drop it, however then we have to fix a missing
GlxExtensionInit that comes from sdksyms, so work around it by moving
that one declaration into a header that sdksyms doesn't scan.
Thanks to Jon Turney for debugging the actual problem.
(copyright header from extinit.h that seems most appropriate put on top).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=52402
Tested-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Tested-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
"new" is a reserved word in C++.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Popen and Pclose are never used on Windows, so don't bother to even
try to define them.
System(s) was defined as system(s), but the two users of that
function are in xkb, which carefully redefines that as
Win32System. Move Win32System and Win32TempDir to os/utils.c, renaming
Win32System to be just System, which simplifies the xkb code
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
These flags were unexported by commit a1d41e311c,
which moved the declarations around and lost the _X_EXPORT attributes in the
process. Since drivers need these and it's late in the release cycle, just
re-export them for now.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Andy Ritger <aritger@nvidia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Not to be confused with XFree86Loader or XorgLoader. Which are both now
dead too.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
setupFunc was used as an early callback for half-modular extensions such
as Xv, XvMC and DGA to set up hooks between the core server and the
modular component. Now we've rid ourselves of that, we can also bin
setupFunc.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
There was nothing XFree86-specific or loader-specific about this, aside
from using xf86MsgVerb instead of ErrorF.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
In preparation for gutting loadext.c, move the ExtensionModule struct to
the DIX, and unexport ExtensionModuleList (why, why, why, why was this
ever exported in the first place, tbqh).
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Instead of letting it languish in extmod just because we want to
configure bits of it from xf86, move XSELinux to the builtin part of
Xext, and do its configuration from xf86ExtensionInit.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Xv used to call XvScreenInit and co. through function pointers, as
XvScreenInit may have been sitting on the other side of a module
boundary from xf86XvScreenInit. Why this was so is a mystery, but make
it not so any more.
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Always build these extensions into the core server, rather than letting
them languish in extmod.
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Always build XRes support into the core server, rather than letting it
languish in extmod.
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Always build DPMS support into the core server, rather than letting it
languish in extmod.
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
If we've built MIT-SCREEN-SAVER support, then just build it into the
main binary, rather than leaving it in extmod.
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Rather than languishing in its own special module, move RECORD into the
core server.
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
If DBE support is compiled in the server, just man up and build it into
the server, rather than having it as an external module.
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Create extinit.h (and xf86Extensions.h, for Xorg-specific extensions) to
hold all our extension initialisation prototypes, rather than
duplicating them everywhere.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
externsion.h required bits from Xfuncproto.h and dixstruct.h, but
included neither; fix that.
It also had _XFUNCPROTOBEGIN and _XFUNCPROTOEND wrappers, which is a bit
pointless for a server-only library, as it's only needed for C++.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Cyril Brulebois <kibi@debian.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Does what it says on the box, replacing those from Xi/ and glx/.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Cyril Brulebois <kibi@debian.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Adds new function padding_for_int32() and uses existing pad_to_int32()
depending on required results.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Daniel Stone <daniel@fooishbar.org>
Casting return to (void) was used to tell lint that you intended
to ignore the return value, so it didn't warn you about it.
Casting the third argument to (char *) was used as the most generic
pointer type in the days before compilers supported C89 (void *)
(except for a couple places it's used for byte-sized pointer math).
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Daniel Stone <daniel@fooishbar.org>
Each DDX currently calls OsReleaseSIGIO in case it was suspended when
the server regen started. This causes a BUG to occur if SIGIO was
*not* blocked at that time. Instead of relying on each DDX, make the
OS layer reliably reset all signal state at server init time, ensuring
that signals are suitably unblocked and that the various signal state
counting variables are set back to zero.
Signed-off-by: Keith Packard <keithp@keithp.com>
For DRI2 in some offload cases we need to set a new pixmap on the crtc,
this hook allows dri2 to call into randr to do the necessary work to set
a pixmap as the scanout pixmap for the crtc the drawable is currently on.
This is really only to be used for unredirected full screen apps in composited
environments.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
add the linked list and provider hooks.
v1.1: add another assert in the add path.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This adds two functions for drivers to use directly to keep a
linked list of slave pixmaps to do damage tracking on and keep
updated. It also adds a helper function that drivers may optionally
call to do a simple copy area damage update.
v2: use damage.h not damagestr.h, fixes ephyr build.
v3: address ajax review: use slave_dst, drop unused dst member.
v4: check DamageCreate return, add SourceValidate comment,
add a comment addressing possible optimisation possibility
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
When randr notices a crtc configuration request for a slave device,
it checks if the slave allocated pixmap exists and is suitable,
if not it allocates a new shared pixmap from the master, shares
it to the slave, and starts the master tracking damage to it,
to keep it updated from the current front pixmap.
If the resize means the crtc is no longer used it will destroy
the slave pixmap.
This adds the concept of a scanout_pixmap to the randr_crtc object,
and also adds a master pixmap pointer to the pixmap object, along
with defining some pixmap helper functions for getting pixmap box/regions.
v2: split out pixmap sharing to a separate function.
v3: update for void *
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is a hooks for pixmap sharing and tracking.
The pixmap sharing ones get an integer handle for the pixmap
and use a handle to be the backing for a pixmap.
The tracker interface is to be used when a GPU needs to
track pixmaps to be updated for another GPU.
v2: pass slave to sharing so it can use it to work out driver.
v3: use void * as per keithp's suggestion.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Just add the interfaces to attach/detach output slaves, and
a linked list to keep track of them. Hook up the randr providers
list to include these slaves.
v1.1: add another assert to the add path.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This list is meant for attaching unbound gpu screens to initially,
before the client side rebinds them.
v1.1: add another assert in the add path.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This adds callbacks into the ddx for udev gpu hotplug.
v2: fix some strncmp returns.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This patch introduces gpu screens into screenInfo. It adds interfaces
for adding and removing gpu screens, along with adding private fixup,
block handler support, and scratch pixmap init.
GPU screens have a myNum that is offset by GPU_SCREEN_OFFSET (256),
this is used for logging etc.
RemoveGPUScreen isn't used until "xfree86: add platform bus hotplug support".
v2: no glyph pictures for GPU screens for now.
v3: introduce MAXGPUSCREENS, fix return value check
v4: fixup myNum when renumbering screens (ajax)
v5: drop cursor privates for now.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
On Linux in order for future hotplug work, we are required to interface
to udev to detect device creation/removal. In order to try and get
some earlier testing on this, this patch adds the ability to use
udev for device enumeration on Linux.
At startup the list of drm/kms devices is probed and this info is
used to load drivers.
A new driver probing method is introduced that passes the udev
device info to the driver for probing.
The probing integrates with the pci probing code and will fallback
to the pci probe and old school probe functions in turn.
The flags parameter to the probe function will be used later
to provide hotplug and gpu screen flags for the driver to behave
in a different way.
This patch changes the driver ABI, all drivers should at least
be set with a NULL udev probe function after this commit.
v2: rename to platform bus, now with 100% less udev specific,
this version passes config_odev_attribs around which are an array
of id/string pairs, then the udev code can attach the set of attribs
it understands, the OS specific code can attach its attrib, and then
the core/drivers can lookup the required attribs.
also add MATCH_PCI_DEVICES macro.
This version is mainly to address concerns raised by ajax.
v3: Address comments from Peter.
fix whitespace that snuck in.
rework to use a linked list with some core functions that
xf86 wraps.
v4: add free list, fix struct whitespace.
ajax this address most of your issues?
v5: drop probe ifdef, fix logic issue
v6: some overhaul after more testing.
Implement primaryBus for platform devices.
document hotplug.h dev attribs - drop sysname attrib
fix build with udev kms disabled
make probing work like the PCI probe code,
match against bus id if one exists, or primary device.
RFC: add new bus id support "PLAT:syspath". we probably
want to match on this a bit different, or use a different
property maybe. I was mainly wanting this for use with
specifying usb devices in xorg.conf directly, but PLAT:path
could also work I suppose.
v6.1: add missing noop platform function
v7: fix two interactions with pci probing and slot claiming, prevents
pci and platform trying to load two drivers for same slot.
v8: test with zaphod mode on -ati driver, fixup resulting issue
clean up common probe code into another function, change busid
matching to allow dropping end of strings.
v9: fix platform probing logic so it actually works.
v9.1: fix pdev init to NULL properly.
v10: address most of Keith's concerns.
v4 was thanks to Reviewed-by: Adam Jackson <ajax@redhat.com>
v5 was Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This will permit midispcur to allocate its privates for hotplug outputs
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Screen-specific privates areas are only allocated for objects related
to the target screen; objects allocated for other screens will not
have the private space reserved. This saves memory in these objects
while also allowing hot-plug screens to have additional private
allocation space beyond what the core screens are using.
Drivers are encouraged to switch to this mechanism as it will reduce
memory usage in multi-GPU environments, but it is only required for
drivers which will be loaded after the server starts, like
modesetting.
Objects providing screen-specific privates *must* be managed by the
screen-specific private API when allocating or initializing privates
so that the per-screen area can be initialized properly.
The objects which support screen-specific privates are:
Windows
Pixmaps
GCs
Pictures
Extending this list to include Colormaps would be possible, but
require slightly more work as the default colormap is created before
all colormap privates are allocated during server startup, and hence
gets a bunch of special treatment.
Of particular note, glyphs are *not* capable of supporting
screen-specific privates as they are global objects, not allocated on
a screen-specific basis, and so each driver must be able to see their
privates within the glyph.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Let the dix be in charge of changing the sigprocmask so we only have one
entity that changes it.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
This merge includes a minor fixup for '%p' arguments; must cast to
uintptr_t instead of uint64_t as we use -Werror=pointer-to-int-cast
which complains when doing a cast (even explicitly) from a pointer
to an integer of different size.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
ErrorF() is not signal safe. Use ErrorSigSafe() whenever an error
message may be logged in signal context.
[whot: edited to "ErrorFSigSafe"]
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
[whot: edited to use varargs, squashed commit below]
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
os: fix vararg length calculation
Make %u and %x sizeof(unsigned int), %p sizeof(void*). This is printf
behaviour and we can't guarantee that void* is uint64_t anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
No other Xfont consumer used it, and this saves us from having to link
callers against libXfont for one simple function when doing
-no-undefined symbols builds.
The function is given a new name to avoid clashing with existing libXfont
binaries, but a #define is provided to preserve the API so we don't have
to fix all the callers at the same time.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
This code existed in 3 different forms, perhaps it should be
consolidated.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Why sending the number of the (implementation-dependent) error statement to
the client is a good idea is a bit beyond me, but at least document it so we
can all share the despair.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This will be used for checking for proper logging when in signal
context.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
f3410b97cf introduced a regression on server
shutdown. If any button or key was held on shutdown (ctrl, alt, backspace
are usually still down) sending a raw event will segfault the server. The
the root windows are set to NULL before calling CloseDownDevices().
Avoid this by disabling all devices first when shutting down. Disabled
devices won't send events anymore.
Master keyboards must be disabled first, otherwise disabling the pointer
will trigger DisableDevice(keyboard) and the keyboard is removed from the
inputInfo.devices list and moved to inputInfo.off_devices. A regular loop
through inputInfo.devices would thus jump to off_devices and not recover.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Helper functions to avoid things like
if (foo) {
BUG_WARN(foo);
return 1;
}
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
This is a squash merge containing all the API changes, as
well as the video ABI bump.
Its been squashed to make bisection easier.
Full patch log below:
commit b202738bbf0c5a1c1172767119c2c71f1e7f8070
Author: Aaron Plattner <aplattner@nvidia.com>
Date: Mon May 14 15:16:11 2012 -0700
xfree86: Bump video ABI to 13.0
The ABI was broken by changes to convert from screen index numbers to ScreenPtr
/ ScrnInfoPtr in various structures and function signatures.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 3d5f7d9f8d408bcad3f83277d255f25d3b0edbf3
Author: Dave Airlie <airlied@redhat.com>
Date: Thu May 24 10:56:57 2012 +0100
xf86: xf86ClearEntityListForScreen should take a pScrn
When adding GPU screens this make life easier.
(also fix comment, as pointed out by Alan)
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit afee8b5ab4501597ecc1ade34124d7ca227ab055
Author: Dave Airlie <airlied@redhat.com>
Date: Thu May 24 07:07:32 2012 +0100
xf86i2c: add pscrn for drivers to use
This just adds a pScrn pointer into the struct for the drivers to use
instead of scrnIndex. Mostly scrnIndex is used for logging, but some
drivers use it to lookup xf86Screens, so let them stash a pScrn instead.
Removing the scrnIndex is a bit more involved and I'm not sure its worth
the effort. Doing i2c in the X server is legacy code as far as I'm concerned.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit ea5092f1f679691d187f1eee9427e6057beec56e
Author: Dave Airlie <airlied@redhat.com>
Date: Wed May 23 19:25:20 2012 +0100
dix/gc: consolidate GC object creation in one place
The standard GC create and scratch GC create were 90% the same really,
and I have a need in the future for creating GC objects without the
other bits, so wanted to avoid a third copy.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 3d91482ea9b4883e64e496f2768168e0ffa21ba1
Author: Dave Airlie <airlied@redhat.com>
Date: Wed May 23 10:24:06 2012 +0100
xf86: add a define to denote the new non-index interfaces are being used
This can be used by drivers to provide compatible APIs.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 37c3ae3e6cd4f3dedc72f371096d6743f8f99df3
Author: Dave Airlie <airlied@redhat.com>
Date: Wed May 23 15:09:12 2012 +0100
dix: make Create/Free scratch pixmaps take a ScreenPtr
While technically an API/ABI change I doubt anyone uses it,
but it helps in splitting screens up.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 75f2062a3fe94f04764ecc7d2ff2fbbeccb9da60
Author: Dave Airlie <airlied@redhat.com>
Date: Wed May 23 14:57:55 2012 +0100
xf86/xv: remove scrnIndexfrom xf86FindXvOptions.
Move this interface to taking an ScrnInfoPtr.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit f80c2374f40ea7b2ee0556e2e76cc07406f3d843
Author: Dave Airlie <airlied@redhat.com>
Date: Wed May 23 14:53:59 2012 +0100
xf86: make xf86DeleteScreen take a ScrnInfoPtr (v2)
stop passing indices into this function.
v2: drop flags argument.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 58824e414f35682435f15bfe6c4b656bd90b9235
Author: Dave Airlie <airlied@redhat.com>
Date: Wed May 23 14:48:09 2012 +0100
xf86: fix xf86IsScreenPrimary interface to take a pScrn (API/ABI)
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 6b4fc1f9d391bcdf7ca288766e49bce60f4635cd
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 14:18:59 2012 +0100
xserver: convert block/wakeup handlers to passing ScreenPtr (ABI/API) (v2)
Instead of passing an index, pass the actual ScreenPtr. This allows
more moving towards not abusing xf86Screens + screenInfo.
v2: drop the blockData/wakeupData args as per ajax's suggestion.,
fix docs.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 790d003de20fb47674420a24dadd92412d78620d
Author: Dave Airlie <airlied@gmail.com>
Date: Wed Apr 11 09:53:14 2012 +0100
xf86/common: remove some more pScrn->pScreen uses
remove some more conversions that appeared after api cleanups.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit aac85e18d1dd093f2cad6bd29375e40bd7af0b8f
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 16:34:53 2012 +0100
ddc: change API to take ScrnInfoPtr (v2)
This removes all xf86Screens usage from ddc code,
it modifies the API for some functions to avoid taking indices.
v2: address Alan's comments about dropping DDC2Init parameter.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit fe3f57b6eaf6860a33876a54f9439f69578f03a5
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 16:31:26 2012 +0100
vbe: don't use index for VBEInterpretPanelID (API)
Remove use of xf86screens from vbe module.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit abf1965f4ed91529036d3fdb470d6a3ce6f29675
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 16:25:11 2012 +0100
int10/vbe: don't use xf86Screens. (ABI) (v3)
Pass the ScrnInfoPtr instead of the index in the int10 struct.
This saves us using it to dereference xf86Screens.
v2: address Alan's comment to fix struct alignment.
v3: squash in all the int10 fixes, test the vm86 code builds,
after comments by Keith.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 23cca612b4fb5efc33683c7624b803b457387e3d
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 15:30:18 2012 +0100
xserver: drop index argument to ScreenInit (ABI/API) (v2)
This drops the index argument, its the same as pScreen->myNum,
and its the last major index abuse I can find.
v2: address Alan's review - update docs, fix xwin/xnest/darwin
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 40d360e2d7e832407f3ed64e3a02c27ecc89a960
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 15:23:01 2012 +0100
xf86: migrate PointerMoved from index to ScrnInfoPtr (ABI/API)
This migrates PointerMoved from an index to ScrnInfoPtr.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit aa60a2f38679d0eeb979a9c2648c9bc771409bf9
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 15:20:46 2012 +0100
xf86: migrate PMEvent to a ScrnInfoPtr (ABI/API)
This migrates the PMEvent from index to ScrnInfoPtr.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit d3f28ef44371ed4a039ffc5dd7eb6408d1269ba2
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 15:18:30 2012 +0100
xf86: migrate SetDGAMode from index to ScrnInfoPtr (ABI/API)
This migrates the SetDGAMode callback from an index to ScrnInfoPtr.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit baf5e4818a74f2b68c3dfdcc56f54322351039a0
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 15:14:11 2012 +0100
xf86: migrate ChangeGamma from index to ScrnInfoPtr (ABI/API) (v2)
This migrates the ChangeGamma interface to avoid passing a index.
v2: fix xf86RandR12.c + xf86cmap.c call
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 51e5f90ada929d6b23176090badbb42fdb3fa550
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 15:11:09 2012 +0100
xf86/exa: migrate index to screen types for EnableDisableFBAccess (ABI/API)
The EXA interface migrates to ScreenPtr,
and the xf86 interface migrated to ScrnInfoPtr.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 94f1f21d17e86f96d4a54292a399160950087675
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 15:02:11 2012 +0100
xf86: migrate ValidMode callback to ScrnInfoPtr (ABI/API)
This migrates the ValidMode to passing a ScrnInfoPtr instead
of an index.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 3f8f18198fed4f39ec805b508a3482e91eea26b2
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 14:59:46 2012 +0100
xf86: migrate SwitchMode to taking ScrnInfoPtr (ABI/API) (v2)
This migrate the SwitchMode interface to take a ScrnInfoPtr
instead of an index.
v2: drop flags.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit d06a038a5c49328ab3a8d969d24f9fcd22c63202
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 14:50:37 2012 +0100
xf86: move AdjustFrame to passing ScrnInfoPtr (ABI/API) (v2)
This converts AdjustFrame code paths to passing a ScrnInfoPtr
instead of an integer index.
v2: drop flags args.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 53d2f8608ffd4090d08e7d5cf2e92fb954959b90
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 14:41:27 2012 +0100
xf86: modify FreeScreen callback to take pScrn instead of index. (ABI/API) (v2)
Another index->pScrn conversion.
v2: drop flags arg.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 60db37c0b247052e0f5c54b1921fe58a3609c2e3
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 14:35:41 2012 +0100
xf86: change EnterVT/LeaveVT to take a ScrnInfoPtr (ABI/API break) (v2)
This modifies the EnterVT/LeaveVT interfaces to take a ScrnInfoPtr
instead of an index into xf86Screens. This allows dropping more
public dereferences of the xf86Screens and screenInfo.
v2: drop flags args as suggested by Keith, fix docs.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 06729dbbc804a20242e6499f446acb5d94023c3c
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 14:04:59 2012 +0100
xserver: remove index from CloseScreen (API/ABI breakage)
This drops the index from the CloseScreen callback,
its always been useless really, since the pScreen contains it.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
In order to use udev for gpu enumeration, we need to init udev earlier
than input initialisations. This splits the config init stuff so that udev
pre init sets up before output initialisation.
this is just a prepatory patch, doesn't change anything major.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is only called from the enterleave implementation, so move it and its
helper functions to there. No functional changes.
Fixes build error introduced in 31174565ec if
building with '-Werror=implicit-function-declaration'
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
../../include/xkbsrv.h:308:51: warning: redundant redeclaration of
‘DeviceKeyPress’ [-Wredundant-decls]
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
