Wrong check for inputInfo.pointer resulted in a SW cursor being rendered when
the pointer left the screen (in a Xinerama setup).
We must call the sprite rendering function if
- SW cursors are enabled, or
- The current device is not the VCP and not attached to the VCP.
Reported-by: Gordon Yuan <GordonYuan@viatech.com.cn>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Previously when compiling on freebsd amd64 we'd end up at xi86
block (line 1315) which would define mem_barrier and write_mem_barrier
to be NOP's. Instead they should be valid, as per the linux amd64 setup.
This stops the hangs experienced by many when using the nv driver
which would hang due to out of order dma requests as noticed in
http://bugs.freedesktop.org/show_bug.cgi?id=3168
Signed-off-by: Benjamin Close <Benjamin.Close@clearchain.com>
xf86vmode.c:1578: warning: pointer targets in passing argument 1 of
‘SwapShorts’ differ in signedness
../../../../include/misc.h:231: note: expected ‘short int *’ but argument is
of type ‘CARD16 *’
xf86vmode.c:1543: warning: unused variable ‘i’
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
You would think, having finally tightened down the spec, that
monitor vendors would bother to implement what the spec actually
mandates. You would be wrong.
crtc->funcs->lock is NULL, so it's no use calling it here. Move it down so
it's actually defined before we use it.
Introduced with 6f59a81600.
Tested-by: Peter Hutterer <peter.hutterer@who-t.net>
This moves code out of each implementation of set_mode_major and back into
the X server. The real feature here is that the transform is now available
in the crtc for use by either xf86CrtcRotate or whatever the driver wants to
do. Without this change, the transform was lost for drivers providing the
set_mode_major interface.
Note that users of this API will want to stop smashing the transformPresent
field, and could also stop setting mode/x/y/rotation for new enough X servers,
but there's no reason to make that change as it will break things when
running against older X servers.
Signed-off-by: Keith Packard <keithp@keithp.com>
Acked-by: Daniel Stone <daniel@fooishbar.org>
Doing so generates the same timings as given in the DMT spec for
120Hz RB, so we should be set there. Other rates might be legal
too but why push our luck.
If you have multiple cards, some that support randr 1.2 and some that don't
you can get a null dereference in here.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Make xf86 RANDR wrap the EnterVT call chain, so it can re-probe the
outputs when a laptop comes back from suspend/unsuspend (actually, any
time that we enter our VT again). The X server should then send RR*
events to clients, so they can cope with a monitor that was unplugged
while the laptop was suspended.
Signed-off-by: Federico Mena Quintero <federico@novell.com>
isMaster is not enough as long as we differ between master pointers and
keyboard. With flexible device classes, the usual checks for whether a
master device is a pointer (currently check for ->button, ->valuators or
->key) do not work as an SD may post an event through a master and mess this
check up.
Example, a device with valuators but no buttons would remove the button
class from the VCP and thus result in the
IsPointerDevice(inputInfo.pointer) == FALSE.
This will become worse in the future when new device classes are introduced
that aren't provided in the current system (e.g. a switch class).
This patch replaces isMaster with "type", one of SLAVE, MASTER_POINTER and
MASTER_KEYBOARD. All checks for dev->isMaster are replaced with an
IsMaster(dev).
Historically, if no input device was referenced in the ServerLayout,
the server would pick the first "mouse" device found in the xorg.conf.
This patch gives evdev, synaptics, vmmouse and void the same status. If
there is a section in the config file using this driver - use it as the core
pointer.
Device selection is in driver-order, not in config-order. If a "mouse"
device is listed after a "synaptics" device, the "mouse" device gets
preference. This replicates the original behaviour.
This code only takes effect if AllowEmptyInput is off and there is no core
pointer in the server layout.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Many old monitors zero-fill the detailed descriptors, so check for that
to avoid a useless warning like:
(WW) RADEON(0): Unknown vendor-specific block 0
Historically, if no input device was referenced in the ServerLayout,
the server would pick the first "mouse" device found in the xorg.conf.
This patch gives evdev, synaptics, vmmouse and void the same status. If
there is a section in the config file using this driver - use it as the core
pointer.
Device selection is in driver-order, not in config-order. If a "mouse"
device is listed after a "synaptics" device, the "mouse" device gets
preference. This replicates the original behaviour.
This code only takes effect if AllowEmptyInput is off and there is no core
pointer in the server layout.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This approach is broken anyway. DIPT only checked for the XInput type
"MOUSE" and the only user of this is xf86ActivateDevice when it sets the
Activate/DeactivateGrab functions.
Since synaptics and wacom set their own types, evdev only sets MOUSE for,
well, mice half the devices didn't have this set correctly anyway.
Instead, ActivatePointerGrab should be merged together with
ActivateKeyboardGrab.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
There's only two reasons for hierarchy events:
- device is added, removed, etc. In this case we want to send the event as
it happens.
- devices are added in a XIChangeDeviceHierarchy request. In this case we
only want one event cumulating all changes.
It reports vertical size in cm in the detailed mode.
X.Org bug#21750 <http://bugs.freedesktop.org/show_bug.cgi?id=21750>
Reported-by: Peter Poklop <Peter.Poklop@gmx.at>
Signed-off-by: Julien Cristau <jcristau@debian.org>
This way clients querying the gamma value via the VidMode extension at least
get the last value set via the same, rather than always something bogus.
Signed-off-by: Michel Dänzer <daenzer@vmware.com>
The reciprocal gamma value was missed in the first copy and this mistake was
propagated to the second one.
Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Error: Write outside array bounds at Xext/geext.c:406
in function 'GEWindowSetMask' [Symbolic analysis]
In array dereference of cli->nextSib[extension] with index 'extension'
Array size is 128 elements (of 4 bytes each), index <= 128
Error: Buffer overflow at dix/events.c:592
in function 'SetMaskForEvent' [Symbolic analysis]
In array dereference of filters[deviceid] with index 'deviceid'
Array size is 20 elements (of 512 bytes each), index >= 0 and index <= 20
Error: Read buffer overflow at hw/xfree86/loader/loader.c:226
in function 'LoaderOpen' [Symbolic analysis]
In array dereference of refCount[new_handle] with index 'new_handle'
Array size is 256 elements (of 4 bytes each), index >= 1 and index <= 256
These bugs were found using the Parfait source code analysis tool.
For more information see http://research.sun.com/projects/parfait
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
We only put internal events into the queue now, so let's check for ET_Motion
rather than the MotionNotify.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We only put internal events into the queue now, so let's check for ET_Motion
rather than the MotionNotify.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
A driver with this hook will take care of preparing the outputs & crtcs,
so calling the prepare functions will just cause unnecessary flicker.
Fixes bug #21077
For redirected rendering we end up with pixmaps (which the app thinks are
windows) that are double buffered.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Tested-by: Pierre Willenbrock <pierre@pirsoft.de>