Just a small code cleanup, there is no need to allocate a variable only
to check the return value of eglInitialize().
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Glamor requires at least big GL 2.1 or GLES2, therefore Xwayland tries
to initialize first GL and then GLES2 if that fails.
It does that all in one single function which makes the code slightly
complicated, move the initialization of big-GL and GLES2 to separate
functions to help with readability of the code.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
We currently bail out early for GLES only devices, and call
epoxy_gl_version() too early for GLES only that will make GLES only
devices return NULL for glGetString(GL_RENDERER).
Let's also add a check to see if we need to recreate the context to
avoid pointless warnings for GLES only devices as suggested by
Olivier Fourdan <ofourdan@redhat.com>.
Fixes: a506b4ec - xwayland: make context current to check GL version
Signed-off-by: Tony Lindgren <tony@atomide.com>
The window buffer mechanism would free the pixmap and its corresponding
Wayland buffer as soon as window buffers are disposed.
Typically when the X11 window is unrealized, the current window buffer
is still used by the Wayland compositor and yet Xwayland will destroy
the buffer.
As a matter of fact, Xwayland should not destroy the Wayland buffer
before the wl_buffer.release event is received.
Add a reference counter to the window buffer similar to the to pixmap
reference counter to keep the buffer around until the release callback
is received.
Increase that reference counter on the buffer which will be attached to
the surface, and drop that reference when receiving the release callback
notification.
v2: Use a specific reference counter on the buffer rather than relying
on the pixmap refcnt (Michel Dänzer <mdaenzer@redhat.com>)
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Acked-by: Martin Peres <martin.peres@mupuf.org>
The cursor code would destroy the buffer as soon as the cursor is
unrealized on X11 side.
Yet, the Wayland compositor may still be using the buffer as long as a
released callback has not been received.
Increase the reference counter on the pixmap to hold a reference on the
pixmap when attaching it to the surface and use the new pixmap release
callback mechanism to release that reference when the buffer is
released.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Martin Peres <martin.peres@mupuf.org>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
The seat and tablet cursor functions are very similar, factorize the
commonalities to simplify the code and reduce the copy/paste.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Commit 6a5a4e6037 removed the option to
configure useSIGIO option. Indeed, the xfree86 SIGIO support was
reworked to use internal versions of OsBlockSIGIO and OsReleaseSIGIO.
As a result, useSIGIO is no longer needed and can dropped
Fixes: 6a5a4e60 - Remove SIGIO support for input [v5]
Closes: xorg/xserver#1107
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Prabhu Sundararaj <prabhu.sundararaj@nxp.com>
Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
LogMessage logs only when the XLOG_VERBOSITY is >= 1, but by default
XLOG_VERBOSITY is 0, so for example warning about deprected -listen
parameter is never shown when running "Xwayland -listen 32 -help".
Signed-off-by: Mariusz Ceier <mceier+freedesktop@gmail.com>
By default, the macro DebugPresent() is a no-op but it can be enabled
at build time for debugging purpose.
However, doing so prevents the code to build because one debug statement
tries to make use of a non-existent variable:
present.c: In function ‘ms_present_queue_vblank’:
present.c:147:18: error: ‘vbl’ undeclared (first use in this function)
147 | vbl.request.sequence));
| ^~~
present.c:49:32: note: in definition of macro ‘DebugPresent’
49 | #define DebugPresent(x) ErrorF x
| ^
Fix the build with DebugPresent() by removing the vbl variable from the
debug message.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
With !155, the device bus ID received via udev is constructed
properly with the "usb:" prefix. But, it is not enough to
make the following line to work in Section "Device":
BusID "usb:0:1.2:1.0"
Introduce BUS_USB, so the prefix can be distinguished from BUS_PCI
and check the supplied BusID value against device->attribs->busid
in xf86PlatformDeviceCheckBusID().
Signed-off-by: Böszörményi Zoltán <zboszor@pr.hu>
Provide an actual definition of noDriExtension where used, rather than a
tentative definition in a header, to fix compilation with -fno-common
(the default with gcc 10).
EGLStream implementation in Xwayland keeps a list of pending streams for
a window.
If the windows's pixmap is destroyed while there is a pending stream,
the pending stream will point to freed memory once the callback is
triggered.
Make sure to cancel the pending stream if there's one when the pixmap is
destroyed.
v2:
* Use xorg_list_for_each_entry() instead of the safe variant (Michel
Dänzer <mdaenzer@redhat.com>)
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Tested-by: Karol Szuster <karolsz9898@gmail.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Closes https://gitlab.freedesktop.org/xorg/xserver/-/issues/1096
Commit 77658741 - "xwayland: Add buffer release callback" added an API
to deal with Wayland buffer release callbacks.
The EGLstream implementation has its own wl_buffer callback, move that
to the buffer release API instead so we don't have to deal with Wayland
buffers directly and match the other Xwayland pixmap backend
implementations.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Tested-by: Erik Kurzinger <ekurzinger@nvidia.com>
Resolves warnings from Oracle Parfait static analyser:
Error: Misleading macro
Misleading macro [misleading-macro]:
misleading evaluation of ternary '?:' operator in expansion of macro V_ADDR_RB due to missing parentheses
at line 392 of hw/xfree86/int10/generic.c.
'|' operator has higher precedence than ternary '?:' operator inside macro body at line 431
low precedence ternary '?:' operator is hidden by expansion of macro V_ADDR_RB at line 431
Misleading macro [misleading-macro]:
misleading evaluation of ternary '?:' operator in expansion of macro V_ADDR_RB due to missing parentheses
at line 392 of hw/xfree86/int10/generic.c.
'<<' operator has higher precedence than ternary '?:' operator inside macro body at line 431
low precedence ternary '?:' operator is hidden by expansion of macro V_ADDR_RB at line 431
Misleading macro [misleading-macro]:
misleading evaluation of ternary '?:' operator in expansion of macro V_ADDR_RB due to missing parentheses
at line 392 of hw/xfree86/int10/generic.c.
'<<' operator has higher precedence than ternary '?:' operator inside macro body at line 442
low precedence ternary '?:' operator is hidden by expansion of macro V_ADDR_RB at line 442
Misleading macro [misleading-macro]:
misleading evaluation of ternary '?:' operator in expansion of macro V_ADDR_RB due to missing parentheses
at line 392 of hw/xfree86/int10/generic.c.
'<<' operator has higher precedence than ternary '?:' operator inside macro body at line 443
low precedence ternary '?:' operator is hidden by expansion of macro V_ADDR_RB at line 443
Misleading macro [misleading-macro]:
misleading evaluation of ternary '?:' operator in expansion of macro V_ADDR_RB due to missing parentheses
at line 392 of hw/xfree86/int10/generic.c.
'|' operator has higher precedence than ternary '?:' operator inside macro body at line 443
low precedence ternary '?:' operator is hidden by expansion of macro V_ADDR_RB at line 441
Misleading macro [misleading-macro]:
misleading evaluation of ternary '?:' operator in expansion of macro V_ADDR_RB due to missing parentheses
at line 392 of hw/xfree86/int10/generic.c.
'<<' operator has higher precedence than ternary '?:' operator inside macro body at line 443
low precedence ternary '?:' operator is hidden by expansion of macro V_ADDR_RB at line 443
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Resolves warning from Oracle Parfait static analyser:
Error: Unchecked result
Unchecked result [unchecked-result-call-X]:
Unchecked return value from call to XOpenDisplay. Value display must be ch
ecked to ensure this function was successful.
at line 73 of hw/dmx/examples/xbell.c in function 'main'.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
It runs XTS via piglit on (non-rootless) Xwayland on weston using the
headless backend.
Xwayland might use glamor if enabled in the build, but we're making sure
it uses software rendering.
v2:
* Use weston-info to wait for weston to be ready, instead of just a
fixed sleep. (Martin Peres)
v3:
* Build wayland 1.18 & weston 9.0 locally, since the packages in Debian
buster are too old for current Xwayland.
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
As Xwayland is usually spawned by the Wayland server/compositor, its
command line options are not always adjustable.
Yet, if EGLStream is not supported in a given Xwayland build, the option
will do nothing (yet we must still accept it otherwise Xwayland would
refuse to run if the Wayland compositor uses it).
If Xwayland was built without support for EGLStream, there is not point
in showing the option in the help message though.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Martin Peres <martin.peres@mupuf.org>
The command line options "-shm" is used to instruct Xwayland to prefer
shared-memory for passing buffers to the Wayland server, rather than
using glamor and DRI3.
The option was there from the beginning, yet not documented in the
"-help" message.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Martin Peres <martin.peres@mupuf.org>
One general assumption in Xwayland is that the xwl_window remains the
same for all the child windows of the toplevel window.
When mapping a new X11 window, ensure_surface_for_window() checks for an
existing xwl_window by using xwl_window_get() which will just check for
the registered xwl_window for the window.
That means that a client mapping a child window of an existing window
with a xwl_window will get another different xwl_window.
If an X11 client issues a Present request on the parent window, hence
placed underneath its child window of the same size, the Wayland
compositor may not send the frame callback event for the parent's
Wayland surface which is reckoned to be not visible, obscured behind
the other Wayland surface for the child X11 window.
That bug affects some games running in wine which may get 1 fps because
the repaint occurs only on timeout with a long interval (as with, e.g.
https://bugs.winehq.org/show_bug.cgi?id=47066)
Fix ensure_surface_for_window() by using xwl_window_from_window() which
will walk the window tree, so that a child window won't get another
xwl_window than its parent.
https://gitlab.freedesktop.org/xorg/xserver/-/issues/1099
See-also: https://bugs.winehq.org/show_bug.cgi?id=47066
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
When running non-rootless, Xwayland requires that the Wayland compositor
supports the XDG-WM-Base protocol.
Check for XDG-WM-Base protocol support at startup and exit cleanly if
missing rather than segfaulting later in ensure_surface_for_window()
while trying to use xdg_wm_base_get_xdg_surface().
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Instead, bump the pixmap's refcount at the bottom of post_damage to
reflect the compositor's hold on the buffer, and "destroy" the pixmap in
the buffer release callback (which will dec the pixmap's refcount and
free if necessary).
Signed-off-by: Adam Jackson <ajax@redhat.com>
When the "CTM" (color transform matrix) modesetting property is available,
create a corresponding RandR property.
To match the format of the property available in the amdgpu driver, expose it as
an array of 18 32-bit XA_INTEGERs representing a 3x3 matrix in row-major order,
where each entry is a S31.32 sign-magnitude fixed-point number with the
fractional part listed first.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: James Jones <jajones@nvidia.com>
If the kernel exposes GAMMA_LUT and GAMMA_LUT_SIZE properties and the size is
not what the server has pre-configured for the crtc, free the old gamma ramp
memory allocated by the server and replace it with new allocations of the
appropriate size.
In addition, when GAMMA_LUT is available, use drmModeCreatePropertyBlob() and
drmModeObjectSetProperty() to set the gamma ramp rather than using the legacy
drmModeCrtcSetGamma() function.
Add a new option "UseGammaLUT" to allow disabling this new behavior and falling
back to drmModeCrtcSetGamma() unconditionally.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Modeset properties can be set even when ms->atomic_modeset is disabled by using
the drmModeObjectSetProperty() function.
This will be necessary in a later change in order to set the GAMMA_LUT and CTM
properties.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
There was a time when setting a mode on a CRTC would not depend on the
associated connector's state. If a mode had been set successfully once,
it would mean it would work later on.
This changed with the introduction of new connectors type that now
require a link training sequence (DP, HDMI 2.0), and that means that
some events may have happened while the X server was not master that
would then prevent the mode from successfully be restored to its
previous state.
This patch relaxes the requirement that all modes should be restored on
EnterVT, or the entire X-Server would go down by allowing modesets to
fail (with some warnings). If a modeset fails, the CRTC will be
disabled, and a RandR event will be sent for the desktop environment to
fix the situation as well as possible.
Additional patches might be needed to make sure that the user would
never be left with all screens black in some scenarios.
v2 (Martin Peres):
- whitespace fixes
- remove the uevent handling (it is done in a previous patch)
- improve the commit message
- reduce the size of the patch by not changing lines needlessly
- return FALSE if one modeset fails in ignore mode
- add comments/todos to explain why we do things
- disable the CRTCs that failed the modeset
Signed-off-by: Kishore Kadiyala <kishore.kadiyala@intel.com>
Signed-off-by: Martin Peres <martin.peres@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Kishore Kadiyala <kishore.kadiyala@intel.com>
Closes: #1010
Normally, we would receive a uevent coming from Linux's DRM subsystem,
which would trigger the check for disappearing/appearing resources.
However, this event is not received when X is not master (another VT
is selected), and so the userspace / desktop environment would not be
notified about the changes that happened while X wasn't master.
To fix the issue, this patch forces a refresh on EnterVT by splitting
the kms-checking code from the uevent handling into its own (exported)
function called drmmode_update_kms_state. This function is then called
from both the uevent-handling function, and on EnterVT right before
restoring the modes.
Signed-off-by: Martin Peres <martin.peres@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Kishore Kadiyala <kishore.kadiyala@intel.com>
Tested-by: Kishore Kadiyala <kishore.kadiyala@intel.com>
This is useful for mock input drivers that control the server in
integration tests. Given that input submission happens on a different
thread than processing, it's otherwise impossible for the driver to
synchronize with the completion of the processing of submitted events.
Signed-off-by: Povilas Kanapickas <povilas@radix.lt>
The EGLStream backend keeps a queue of pending streams for each Xwayland
window.
However, when this pending queue is freed, the corresponding private
data may not be cleared (typically if the pixmap for this window has
changed before the compositor finished attaching the consumer for the
window's pixmap's original eglstream), leading to a use-after-free and a
crash when trying to use that data as the window pixmap.
Make sure to clear the private data when the pending stream is freed.
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1055
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Tested-by: Karol Szuster <karolsz9898@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Using multiple window buffers crashes with EGLStream, which does not
need it anyway as this is handled through EGL directly.
Add a flag to the EGL backend to indicate whether it would benefit from
multiple buffers and use this in the get_buffer() function.
Thanks to Adam Jackson <ajax@redhat.com> for pointing out that issue
with EGLStream.
v2: Fix logical test (Adam Jackson <ajax@redhat.com>)
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The present flip does not work with the EGLStream backend. Similarly,
the EGLStream backend does not require the buffer to be flushed as
eglSwapBuffers() should take care of this.
Instead of actually checking the backend in use in the present code,
add a flag in the form of a bitfield to the EGL backend to indicate
its features and requirements.
This should not introduce any functional change.
v2: Fix logical test (Adam Jackson <ajax@redhat.com>)
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Major/minor numbers are a.. major (ha) source of pain in FreeBSD porting.
In this case, Xwayland was thinking that /dev/dri/card0 is already a render node,
because the st_rdev on FreeBSD was passing the Linux-style check,
and because of the assumption, acceleration would fail because
various ioctls like AMDGPU_INFO would be denied on the non-render node.
Switch to libdrm's function that already works correctly on all platforms.
Signed-off-by: Greg V <greg@unrelenting.technology>
Reviewed-by: Emmanuel Vadot <manu@FreeBSD.org>
Fetch VariableRefresh option value from X conf file for
modesetting backend DDX driver. This option defaults to false,
and must be set to "true" in conf file for variable refresh
support in the DDX driver.
Signed-off-by: Uday Kiran Pichika <pichika.uday.kiran@intel.com>
Window wrappers gets the notification when the window
properties changes. These wrappers are mainly used to
keep track of per-window _VARIABLE_REFRESH property values.
These changes have been ported from AMDGPU
Signed-off-by: Uday Kiran Pichika <pichika.uday.kiran@intel.com>
These changes have been ported from AMD GPU DDX driver.
This patch adds support for setting the CRTC variable refresh property
for suitable windows flipping via the Present extension.
In order for a window to be suitable for variable refresh it must have
the _VARIABLE_REFRESH property set by the MESA and inform Modesetting
DDX driver with window property updates.
Then the window must pass the checks required to be suitable for
Present extension flips - it must cover the entire X screen and no
other window may already be flipping. And also DRM connector should
be VRR capable.
With these conditions met every CRTC for the X screen will have their
variable refresh property set to true.
Kernel Changes to support this feature in I915 driver is under development.
Tested with DOTA2, Xonotic and custom GLX apps.
Signed-off-by: Uday Kiran Pichika <pichika.uday.kiran@intel.com>
We can only flip if the window pixmap matches that of the toplevel
window. Doing so regardless could cause the toplevel window pixmap to
get destroyed while it was still referenced by the window, resulting in
use-after-free and likely a crash.
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1033
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Roman Gilg <subdiff@gmail.com>
The need_rotate variable is only used once anymore and had semantics which lead
to errors in the past. In particular when negated we are dealing with a double
negation.
The variable gets replaced with a simple check on the xdg-output directly.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
This reverts commit 427f8bc009.
When receiving an output update for the mode size we need to rotate the stored
width and height values if and only if we have an xdg-output for this output
since in this case the stored values describe the output's size in logical
space, i.e. rotated.
The here reverted commit made a code change with which we would not rotate though
when an xdg-output was available since in this case the need_rotate variable was
set to False what caused in the check afterwards the first branch to execute.
That is just a small style-change to the output_get_new_size function. The
function before did take first the height and then the width argument, what
is unusual since resolutions are normally named the other way around, for
example 1920x1080. Also compare the update_screen_size function.
Therefore change the order of arguments for output_get_new_size.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
We can just read out the xdg_output field of the provided xwl_output to check
if a rotation is necessary or not.
This makes the function easier to understand. Additionally some documentation
is added.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Xwayland is just a Wayland client, no X11 screensaver should be
expected to work reliably on Xwayland when running rootless because
Xwayland cannot grab the input devices so it has no way to actually
lock the screen managed by the Wayland compositor.
Turn off the screensaver on Xwayland when running rootless by setting
the screensaver timeout and interval and their default values to zero
and disable the MIT-SCREEN-SAVER extension.
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1051
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Instead of optionally return early when an event is aborted and potentially
clean it up in there we can only optionally inform Present if not aborted and
afterwards clean it up if required.
Saves some lines of code and conditional branches.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
With the newly introduced separate API method for idling a presented Pixmap in
window mode we can simplify the logic by allowing calls to it at any point in
time.
This is done by setting the flip_idler flag if the Pixmap was idled before
being presented.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Notifying Present about events' states was done prior with the single function
present_wnmd_event_notify just like in screen mode. But it is more intelligible
if at least in window mode we make use of three different functions with names
that directly indicate what their purpose is:
* present_wnmd_event_notify only for queued events feedback.
* present_wnmd_flip_notify for when a presentation occured (flip).
* present_wnmd_idle_notify for when the Pixmap of the event can be reused.
This is an API-breaking change in regards to window mode. DDX written against
the previous version won't work anymore. It is assumed that there only exists
the XWayland DDX at the moment using the window mode such that this is not an
issue for the overall ecosystem.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Rename the lists release_queue to release_list and event_list to
wait_list.
The prior names release_queue and event_list were ambiguous: in both are event-
like vblanks which can be removed from the lists in random order. In the
release_queue can be flips that are already released but still wait for the
sync or frame callback but normally the release comes later. In the event_list
are queued events waiting for a later msc.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Commit 1e3f9ea1 removed some NULL checks from xf86RandR12.c, on the premise that
they can't be reached unless RandR has already been initialized. For threesuch
calls, that's not true:
xf86Crtc.c::xf86CrtcScreenInit():
if (c == config->num_crtc) {
xf86RandR12SetRotations(screen, RR_Rotate_0 | RR_Rotate_90 |
RR_Rotate_180 | RR_Rotate_270 |
RR_Reflect_X | RR_Reflect_Y);
xf86RandR12SetTransformSupport(screen, TRUE);
}
else {
xf86RandR12SetRotations(screen, RR_Rotate_0);
xf86RandR12SetTransformSupport(screen, FALSE);
}
xf86Crtc.c::xf86CrtcCloseScreen():
xf86RandR12CloseScreen(screen);
This change adds checks back to xf86RandR12Set{Rotations,TransformSupport}() and
xf86RandR12CloseScreen(), checking that xf86RandR12KeyRec has been registered.
Without this, X will hit an assert that causes it to abort.
Signed-off-by: Alex Goins <agoins@nvidia.com>
This (so-far) Linux-only API lets users create file descriptors purely
in memory, without any backing file on the filesystem and the race
condition which could ensue when unlink()ing it.
It also allows seals to be placed on the file, ensuring to every other
process that we won’t be allowed to shrink the contents, potentially
causing a SIGBUS when they try reading it.
This patch is best viewed with the -w option of git log -p.
This is a port of this commit from Weston:
deae98ef45Fixes#848.
Signed-off-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
When a slave device causes the master virtual pointer device to change
device types, the device's private data pointer
(device->public.devicePrivate) is also changed to match the type of the
slave device. This can be a problem though, as tablet pad devices will
set the device's private data pointer to their own xwl_tablet_pad
struct. This can cause us to dereference the pointer as the wrong type,
and result in a segfault:
Thread 1 "Xwayland" received signal SIGSEGV, Segmentation fault.
wl_proxy_marshal (proxy=0x51, opcode=opcode@entry=0) at src/wayland-client.c:792
792 va_start(ap, opcode);
(gdb) bt
0 wl_proxy_marshal (proxy=0x51, opcode=opcode@entry=0) at
src/wayland-client.c:792
1 0x00005610b27b6c55 in wl_pointer_set_cursor (hotspot_y=0,
hotspot_x=0, surface=0x0, serial=<optimized out>, wl_pointer=<optimized
out>) at /usr/include/wayland-client-protocol.h:4610
2 xwl_seat_set_cursor (xwl_seat=xwl_seat@entry=0x5610b46d5d10) at
xwayland-cursor.c:137
3 0x00005610b27b6ecd in xwl_set_cursor (device=<optimized out>,
screen=<optimized out>, cursor=<optimized out>, x=<optimized out>,
y=<optimized out>) at xwayland-cursor.c:249
4 0x00005610b2800b46 in miPointerUpdateSprite (pDev=0x5610b4501a30) at
mipointer.c:468
5 miPointerUpdateSprite (pDev=0x5610b4501a30) at mipointer.c:410
6 0x00005610b2800e56 in miPointerDisplayCursor (pCursor=0x5610b4b35740,
pScreen=0x5610b3d54410, pDev=0x5610b4501a30) at mipointer.c:206
7 miPointerDisplayCursor (pDev=0x5610b4501a30, pScreen=0x5610b3d54410,
pCursor=0x5610b4b35740) at mipointer.c:194
8 0x00005610b27ed62b in CursorDisplayCursor (pDev=<optimized out>,
pScreen=0x5610b3d54410, pCursor=0x5610b4b35740) at cursor.c:168
9 0x00005610b28773ee in AnimCurDisplayCursor (pDev=0x5610b4501a30,
pScreen=0x5610b3d54410, pCursor=0x5610b4b35740) at animcur.c:197
10 0x00005610b28eb4ca in ChangeToCursor (pDev=0x5610b4501a30,
cursor=0x5610b4b35740) at events.c:938
11 0x00005610b28ec99f in WindowHasNewCursor
(pWin=pWin@entry=0x5610b4b2e0c0) at events.c:3362
12 0x00005610b291102d in ChangeWindowAttributes (pWin=0x5610b4b2e0c0,
vmask=<optimized out>, vlist=vlist@entry=0x5610b4c41dcc,
client=client@entry=0x5610b4b2c900) at window.c:1561
13 0x00005610b28db8e3 in ProcChangeWindowAttributes (client=0x5610b4b2c900)
at dispatch.c:746
14 0x00005610b28e1e5b in Dispatch () at dispatch.c:497
15 0x00005610b28e5f34 in dix_main (argc=16, argv=0x7ffc7a601b68,
envp=<optimized out>) at main.c:276
16 0x00007f8828cde042 in __libc_start_main (main=0x5610b27ae930 <main>,
argc=16, argv=0x7ffc7a601b68, init=<optimized out>, fini=<optimized
out>, rtld_fini=<optimized out>, stack_end=0x7ffc7a601b58) at
../csu/libc-start.c:308
17 0x00005610b27ae96e in _start () at cursor.c:1064
Simple reproducer in gnome-shell: open up an Xwayland window, press some
tablet buttons, lock and unlock the screen. Repeat if it doesn't crash
the first time.
So, let's fix this by registering our own device-specific private key
for storing a backpointer to xwl_tablet_pad, so that all input devices
have their private data pointers set to their respective xwl_seat.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Lyude Paul <lyude@redhat.com>
In 9141196d positional coordinates were added to the damage call of pixmap
flips. The damage box coordinates are in screen space though and we need
to convert them first to surface-relative ones by substracting the origin
of the window.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Xwayland is usually spawned by the Wayland compositor which sets the
command line options.
If a command line option is not supported, Xwayland will fail to start.
That somehow makes the Xwayland command line option sort of ABI, the
Wayland compositor need to know if a particular option is supported by
Xwayland at build time.
Also, currently, Xwayland is being installed along with the rest of the
common executable programs that users may run, which is sub-optimal
because, well, Xwayland is not a common executable program, it's meant
to be a proxy between the Wayland compositor and the legacy X11 clients
which wouldn't be able to run on Wayland otherwise.
Xwayland would be better installed in `libexec` but that directory is
(purposedly) not in the user `PATH` and therefore the Wayland compositor
may not be able to find Xwayland in that case.
To solve both problems (which options are supported by Xwayland and
where to look for it), add a `pkg-config` file specifically for Xwayland
which gives the full path to Xwayland (`xwayland`) and which options it
supports (using `pkg-config` variables).
The `pkg-config` file also provides the `Version` so the build scripts
can check for a particular version if necessary.
Obviously, Wayland compositors are not required to use the `pkg-config`
file and can continue to use whatever mechanism they deem preferable.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Most (but not all) of these were found by using
codespell --builtin clear,rare,usage,informal,code,names
but not everything reported by that was fixed.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
The way Xwayland works (like all Wayland clients), it first queries the
Wayland registry, set up all relevant protocols and then initializes its
own structures.
That means Xwayland will get the Wayland outputs from the Wayland
compositor, compute the physical size of the combined outputs and set
the corresponding Xwayland screen properties accordingly.
Then it creates the X11 screen using fbScreenInit() but does so by using
a default DPI value of 96. That value is used to set the physical size
of the X11 screen, hence overriding the value computed from the actual
physical size provided by the Wayland compositor.
As a result, the DPI computed by tools such as xdpyinfo will always be
96 regardless of the actual screen size and resolution.
However, if the Wayland outputs get reconfigured, or new outputs added,
or existing outputs removed, Xwayland will recompute and update the
physical size of the screen, leading to an unexpected change of DPI.
To avoid that discrepancy, use a fixed size DPI (defaults to 96, and can
be set using the standard command lime option "-dpi") and compute a
physical screen size to match that DPI setting.
Note that only affects legacy core protocols, X11 clients can still get
the actual physical output size as reported by the Wayland compositor
using the RandR protocol, which also allows for the size to be 0 if the
size is unknown or meaningless.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/731
ProcVidModeGetGamma() relies on GetGamma() to initialise values if it
returns TRUE. Without this, we're sending uninitialised values to
clients.
Fixes: xorg/xserver#1040
When running with a weston session without a pointer device (thus with
the wl_seat not having a pointer) xwayland pointer warping and pointer
confining should simply be ignored to avoid crashes.
Signed-off-by: Sjoerd Simons <sjoerd@collabora.com>
Since the introduction of "modesetting: Remove unnecessary fb addition from
drmmode_xf86crtc_resize" the fb_id isn't initialited at
drmmode_xf86crtc_resize.
Rotate operation of XRandR uses rotate_bo. So in this case the fb_id
associated to the front_bo is not initialized at drmmode_set_mode_major.
So fd_id remains 0.
As every call to drmmode_xf86crtc_resize allocates a new front_bo we should
destroy unconditionally the old_front_bo if operation success. So we free
the allocated GBM handles.
This avoids crashing xserver with a OOM in the RPI4 1Gb at 4k resolution
after 3 series xrandr rotations from normal to left and vice versa reported at
https://github.com/raspberrypi/firmware/issues/1345
Signed-off-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1024
Fixes: 8774532121 "modesetting: Remove unnecessary fb addition from
drmmode_xf86crtc_resize"
These events aren't reachable after xwl_present_cleanup, so they're
leaked if we don't free them first.
This requires storing the pixmap pointer in struct xwl_present_window.
Luckily, the buffer pointer isn't used for anything, so just replace
that.
v2:
* Bump pixmap reference count in xwl_present_flip and drop it in
xwl_present_free_event, fixes use-after-free in the latter due to the
pixmap already being destroyed.
Reviewed-by: Dave Airlie <airlied@redhat.com>
During a VT-Switch a raw pointer to the shared cursor object
is saved which is then freed (in case of low refcount) by a call to
xf86CursorSetCursor with argument pCurs = NullCursor.
This leads to a dangling pointer which can follow in a use after free.
This fix ensures that there is a shared handle saved for the VT-Switch cycle.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
EDID1.4 replaced GTF Bit with Continuous or Non-Continuous Frequency Display.
Check the "Display Range Limits Descriptor" for GTF support.
If panel doesn't support GTF, then add gtf modes.
Otherwise X will only show the modes in "Detailed Timing Descriptor".
V2: Coding style changes.
V3: Coding style changes, remove unused variate.
V4: remove unused variate.
BugLink: https://gitlab.freedesktop.org/drm/intel/issues/313
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
When the linux-dmabuf protocol is available, prefer it over the old
wl_drm protocol. Previously wl_drm was used when modifiers aren't
supported, however linux-dmabuf supports formats without modifiers too.
In this case, linux-dmabuf will send a DRM_FORMAT_MOD_INVALID modifier
for each supported format [1].
This allows compositors to better handle these buffers, getting a
DMA-BUF and implementing features like direct scan-out.
A similar logic has been implemented for EGL [2].
DRM_FORMAT_MOD_INVALID is now stored in the xwl_screen->formats list.
glamor_get_modifiers still returns FALSE with zero modifiers if the
only advertised modifier is DRM_FORMAT_MOD_INVALID.
[1]: fb9b2a8731
[2]: c376865f5e
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Previously, linux-dmabuf was used unconditionally if the buffer had a
modifier. However creating a linux-dmabuf buffer with a format/modifier
which hasn't been advertised will fail.
Change xwl_glamor_gbm_get_wl_buffer_for_pixmap to use linux-dmabuf when
the format/modifier has been advertised only.
Signed-off-by: Simon Ser <contact@emersion.fr>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1035
Tested-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
This flag should only be used when the caller intends to display the
buffer on a hardware plane. Xwayland isn't a DRM client, so it doesn't
make sense to use this flag.
This change will allow the driver to potentially use buffer parameters
that are more optimized.
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Without this the client library will flail around looking for a default
provider, probably one named "indirect", and that defeats the point of
having the EGL provider for direct context support in the first place.
This assumes that "mesa" will work, of course, and in general it should.
Mesa drivers will DTRT through the DRI3 setup path, and if our glamor is
atop something non-Mesa then you should fall back to llvmpipe like 1.20.
In the future it might be useful to differentiate the vendor here based
on whether glamor is using gbm or streams.
Fixes: xorg/xserver#1032
None of the current BSD is actually using this code.
(checked DragonFly 5.8.1, FreeBSD 11.2, NetBSD 9.0 and OpenBSD 6.7)
Signed-off-by: Matthieu Herrb <matthieu@herrb.eu>
In file included from ../glx/glxdri2.c:35:
/usr/local/include/GL/internal/dri_interface.h:43:10: fatal error: 'drm.h' file not found
#include <drm.h>
^~~~~~~
In file included from ../glx/glxdriswrast.c:39:
/usr/local/include/GL/internal/dri_interface.h:43:10: fatal error: 'drm.h' file not found
#include <drm.h>
^~~~~~~
Xwayland uses the device private to point to the `xwl_seat`.
Device may be removed at any time, including on suspend.
On resume, if the DIX code ends up calling a function that requires the
`xwl_seat` such as `xwl_set_cursor()` we may end up pointing at random
data.
Make sure the clear the device private data on removal so that we don't
try to use it and crash later.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
https://gitlab.freedesktop.org/xorg/xserver/issues/709
Drop GBM_BO_USE_SCANOUT from the GBM_BO_IMPORT_FD import, add
GBM_BO_USE_RENDERING to the GBM_BO_IMPORT_FD_MODIFIER import.
If the DMA-BUF cannot be scanned out, gbm_bo_import with
GBM_BO_USE_SCANOUT will fail. However Xwayland doesn't need to scan-out
the buffer and can work fine without scanout. Glamor only needs
GBM_BO_USE_RENDERING.
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
In this pretty Wine/Proton specific kludge, we try to handle confining grabs
on InputOnly windows by trying to find the InputOutput window that the pointer
would get visually confined to.
The grabbing window and the visible window come from different clients, so
we used to simply resort to the pointer focus. This is troublesome though, as
the call may happen very soon at a time that the toplevel wasn't yet mapped by
the Wayland compositor, so the pointer focus may well be out of date soon.
In these situations, it does seem that even though the confining grab happens
too early to have the wayland surface mapped, the xserver view of the WindowPtr
does already reflect the size. Use this to find out the better window to
assign the confining grab to, one whose geometry fully contains the InputOnly
window's.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
xwl_seat_maybe_lock_on_hidden_cursor() checks that the value of
cursor_confinement_window is not NULL, yet there is no code path
that could lead to this.
Remove the test for cursor_confinement_window being set, it's useless.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
When an X11 client issues a ConfinePointer wit ha hidden cursor,
Xwayland may translate that as a pointer lock.
However, if the pointer is located on another window at the time,
the request may be ignored, even if the pointer later enters the window.
To avoid that issue, check again if locking the pointer with a hidden
cursor is needed when pointer enters a surface.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
When an X11 client has an active grab on the pointer, all events are
reported relative to the window with the grab.
For Xwayland, if an X11 client has a grab with a pointer confinement
active, while pointer focus is on another window, motion events should
not be reported to the client with the grab, because that sets the X11
client appart, the events would be reported when the pointer is on any
X11 window but not on Wayland native surfaces.
Therefore, if the pointer is confined on a window and that window
differs from the actual pointer focus window, just pretend we lost
pointer focus to another window.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/962
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
If a client issues a grab on the pointer while the cursor is on another
X11 window, and then hides the cursor, we may end up locking the pointer
onto that other window.
Then a button click might end up moving the focus away from the window
which issued the grab, leaving the whole setup in a mixed up state.
Typically, if the pointer is on another X11 window, we should not try to
lock the pointer, so that it can be moved back to the window which
actually issues the grab (and hence the pointer confinement). Typically,
this is the same as an X11 client issuing a pointer grab while the
cursor is on another Wayland native window.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/962
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Mostly http->https conversions, but also replaces gitweb.fd.o
with gitlab.fd.o, and xquartz.macosforge.org with xquartz.org.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
On systems with ACPI but disabled APM (e.g. --disable-linux-apm)
the code does not compile due to preprocessor directives.
If APM is disabled, the final return statement is considered to
be part of ACPI's last if-statement, leading to a function which
has no final return statement at all.
I have refactored the code so ACPI and APM are independent of each
other.
Signed-off-by: Tobias Stoeckmann <tobias@stoeckmann.org>
Mutter recently added headless tests, and when running those tests the
Wayland compositor runs for a very short time.
Xwayland is spawned by the Wayland compositor and upon startup will
query the various Wayland protocol supported by the compositor.
To do so, it will do a roundtrip to the Wayland server waiting for
events it expects.
If the Wayland compositor terminates before Xwayland has got the replies
it expects, it will loop indefinitely calling `wl_display_roundtrip()`
continuously.
To avoid that issue, add a new `xwl_screen_roundtrip()` that checks for
the returned value from `wl_display_roundtrip()` and fails if it is
negative.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Roman Gilg <subdiff@gmail.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
All helper client code now uses xcb, so calling XSetAuthorization() is
no longer needed.
This is the last reference to libX11 from helper clients, so linking
with x11-xcb and libX11 is no longer required.
Also drop (unneeded?) linking with libXau.
Also drop installing these prerequistes on AppvVeyor.
Also move prototypes for functions in winauth.c from win.h into a new
header, winauth.h, and include that where needed.
Convert clipboard integration code from libX11 to xcb
This drops support for COMPOUND_TEXT. Presumably some ancient
(pre-2000) clients exist which support that, but not UTF8_STRING, but we
don't have an example to test with. (Given the nature of the thing, the
users of those clients probably work in CJK languages)
Supporting COMPOUND_TEXT would also involve writing (or extracting from
Xlib) support for the ISO 2022 encoding.
v2:
Fix the length of text property set by a SelectionRequest
The length of the text property is not neccessarily the same as the
length of the clipboard text before it is d2u converted (specifically,
if that contains any '\r\n' sequences, it will be shorter as they are
now just '\n')
Always use CF_UNICODETEXT clipboard format. Windows will automatically
down-convert to CF_TEXT for clients which request that.
This is subtly different in one way: if CF_TEXT is requested, we now
post CF_UNICODETEXT and it is converted to CF_TEXT *in the locale of the
requesting process*. Previously, we would convert to CF_TEXT *in our
locale* and post that.
It looks like the code in the !X_HAVE_UTF8_STRING case didn't actually
work correctly, but fortunately that has never been true...
The original Win32 clipboard API is widely regarded as terrible, since
it relies on clients co-operatively managing the clipboard viewer chain,
and a single buggy client can break it for all other clients.
The last Windows version only supporting that API was Windows XP (5.1),
EOLed in 2014.
(This requires MinGW-w64 w32api 6.0.0 or later for
Add/RemoveClipboardListener correctly exported by the x86_64 user32
implib)
Also, relax the timeout mechanism so it allows 1 second between events,
rather than 1 second for the entire transfer, as transfers of large
pastes can take more than 1 second.
Also, prefer UTF8_STRING encoding to COMPOUND_TEXT encoding
This option was implemented before the drivers were split in ≈2006,
and e.g. XWin still supports it.
With this commit, Xorg regains support, so that the following configuration can
be used to set the repeat rate for all keyboard devices without having to modify
Xorg command-line flags or having to automate xset(1):
Section "InputClass"
Identifier "system-keyboard"
MatchIsKeyboard "on"
Option "XkbLayout" "de"
Option "XkbVariant" "neo"
Option "AutoRepeat" "250 30"
EndSection
Signed-off-by: Michael Stapelberg <stapelberg@google.com>
We were only calling xwl_present_unrealize_window for the toplevel
window, but the list can contain entries from child windows as well,
in which case we were leaving dangling pointers to freed memory.
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/1000
Fixes: c5067feaee "xwayland: Use single frame callback for Present
flips and normal updates"
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Recently, rooted Xwayland crashes on wlroots-based compositors, because
wlroots removed the deprecated wl_shell protocol.
This MR fixes this by changing the code in question to the xdg-shell
protocol. My motivation do this: on etnaviv-based embedded platforms,
rooted Xwayland is much faster and doesn't cause UI rendering bugs
compared to rootless Xwayland.
Signed-off-by: Lukas F. Hartmann <lukas@mntre.com>
Since the recent fix to call xwl_output_set_window_randr_emu_props() from
ensure_surface_for_window(), it is now only called on a toplevel window,
so the is-toplevel check is not necessary for the
xwl_output_set_window_randr_emu_props() case.
This commit moves the check to xwl_output_set_randr_emu_prop_callback()
so that we only do it when we are walking over all Windows of a client
to update the property on a change of the emulated resolution.
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
For window-manager managed windows, xwl_realize_window is only called for
the window-manager's decoration window and not for the actual client window
on which we should set the _XWAYLAND_RANDR_EMU_MONITOR_RECTS prop.
Usualy this is not a problem since we walk all client windows to update
the property when the resolution is changed through a randr call.
But for apps which first do the randr change and only then create their
window this does not work, and our xwl_output_set_window_randr_emu_props
call in xwl_realize_window is a no-op as that is only called for the wm
decoration window and not for the actual client's window.
This commit fixes this by making ensure_surface_for_window() call
xwl_output_set_window_randr_emu_props on the first and only child of
window-manager managed windows.
Note this also removes the non-functional xwl_output_set_window_randr_emu_props
call from xwl_realize_window, which was intended to do this, but does not
work.
This fixes apps using the ogre3d library always running at the
monitors native resolution.
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Some clients, which use vidmode to change the resolution when going fullscreen,
create an override-redirect window and never trigger the screen->ResizeWindow
callback we rely on to do the xwl_window_check_resolution_change_emulation().
This causes us to not apply a viewport to them, causing the fullscreen window
to not fill the entire monitor.
This commit adds a call to xwl_window_check_resolution_change_emulation()
at the end of ensure_surface_for_window() to fix this. Note that
ensure_surface_for_window() exits early without creating an xwl_window
for new windows which will not be backed by a wayland surface and which
thus will not have an xwl_window.
This fixes ClanLib-0.6.x and alleggl-4.4.x using apps not properly
fullscreening.
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The code building the mode-list does the following to deal with screen
rotation:
if (need_rotate || xwl_output->rotation & (RR_Rotate_0 | RR_Rotate_180)) {
mode_width = xwl_output->width;
mode_height = xwl_output->height;
} else {
mode_width = xwl_output->height;
mode_height = xwl_output->width;
}
This means we need to do something similar in xwl_output_set_emulated_mode()
to determine if the mode being set is the actual (not-emulated) output mode
and we this should remove any emulated modes set by the client.
All callers of xwl_output_set_emulated_mode always pass a mode pointer
to a member of xwl_output->randr_output->modes, so we do not need to
duplicate this code, instead we can simply check that the passed in mode
is modes[0] which always is the actual output mode.
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Not only hook the ResizeWindow method of the screen (which really is
MoveAndResize) but also hook the MoveWindow method for checking if we
need to setup a viewport for resolution change emulation.
Our resolution change emulation check if the windows origin matches
the monitors origin and the windows origin can also be changed by just
a move without being resized.
Also checking on a move becomes esp. important when we move to checking
on changes to the top-level non-window-manager client (X11)Window instead
of on changes to the xwl_window later on in this patch series.
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The recent change to use the top-level non-window-manager Window drawable
coordinates from xwl_window_check_resolution_change_emulation() in
combination with only calling it on a resize when the top-level window
is moved breaks things with mutter/gnome-shell.
When fullscreening a X11 window, mutter moves its window-decoration Window
wrapping the top-level Window to the monitor's origin coordinates (e.g. 0x0)
last. This updates the top-level's drawable coordinates, but as the
actual MoveWindow is called on the wrapper Window and not on the toplevel
we do not call xwl_window_check_resolution_change_emulation() and we never
enable the viewport.
This commit fixes this by also calling
xwl_window_check_resolution_change_emulation() if the Window being moved
is an xwl_window itself.
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
When a reparented window is resized directly check the emulation instead of
doing this only when the window manager parent window is resized, what might
never happen.
For that to work we need to make sure that we compare the current size of the
client toplevel when looking for an emulated mode.
Changes by Hans de Goede:
- Remove xwl_window x, y, width and height members as those are no longer used.
- Add check for xwl_window_from_window() returning NULL.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Make window_get_none_wm_owner return the first non-wm-window instead of the
owner (client) of the first non-wm-window and rename it to
window_get_client_toplevel to match its new behavior.
This is a preparation patch for switching to using the drawable coordinates
in xwl_window_should_enable_viewport()
Changes by Hans de Goede:
- Split this change out into a separate patch for easier reviewing
- Rename window_get_none_wm_owner to window_get_client_toplevel to match
its new behavior
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
An X11 window manager might add a chain of parent windows when reparenting to a
decoration window.
That is for example the case for KWin, which reparents client windows to one
decoration and another wrapper parent window.
Account for that by a recursion into the tree. For now assume as before that
all X11 window managers reparent with one child only for these parent windows.
Changes by Hans de Goede:
- Move the xwl_window_is_toplevel() from a later patch in this series here
as it really belongs together with these changes
- Drop no longer necessary xwl_window argument from window_get_none_wm_owner
parameters
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
When a viewport is already created we can reuse this object instead of
destroying it and getting a new one for updating the source rectangle and
destination size.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Instead of iterating over all clients which are listening for events on the
root window and checking if the client we are dealing with is the one
listening for SubstructureRedirectMask | ResizeRedirectMask events and thus
is the window-manager, cache the client-id of the window-manager in
xwl_screen and use that when checking if a client is the window-manager.
Note that we cache and compare the client-id rather then the ClienPtr,
this saves reading the ClientPtr from the global clients array when doing
the comparison.
Suggested-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Xorg supports the '-version' command line option, add something similar
to Xwayland.
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/976
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
xf86platformProbeDev didn't check the device path, fix it.
This is a problem when trying to set up a non-PCI device via
explicit xorg.conf.d configuration.
An USB DisplayLink device, being non-PCI was always set up
as a GPU device assigned to screen 0 instead of a regular
framebuffer, potentially having its own dedicated screen,
despite such configuration as below. Only the relevant parts
of the configuration are quoted, it's part of a larger context
with an Intel chip that has 3 outputs:
* DP1 connected to an LCD panel,
* VGA1 connected to an external monitor,
* HDMI1 unconnected and having no user visible connector
Section "ServerFlags"
Option "AutoBindGPU" "false"
EndSection
...
Section "Device"
Identifier "Intel2"
Driver "intel"
BusID "PCI:0:2:0"
Screen 2
Option "Monitor-HDMI1" "HDMI1"
Option "ZaphodHeads" "HDMI1"
EndSection
Section "Device"
Identifier "UDL"
Driver "modesetting"
Option "kmsdev" "/dev/dri/card0"
#BusID "usb:0:1.2:1.0"
Option "Monitor-DVI-I-1" "DVI-I-1"
Option "ShadowFB" "on"
Option "DoubleShadow" "on"
EndSection
...
Section "Screen"
Identifier "SCREEN2"
Option "AutoServerLayout" "on"
Device "UDL"
GPUDevice "Intel2"
Monitor "Monitor-DVI-I-1"
SubSection "Display"
Modes "1024x768"
Depth 24
EndSubSection
EndSection
Section "ServerLayout"
Identifier "LAYOUT"
Option "AutoServerLayout" "on"
Screen 0 "SCREEN"
Screen 1 "SCREEN1" RightOf "SCREEN"
Screen 2 "SCREEN2" RightOf "SCREEN1"
EndSection
On the particular machine I was trying to set up an UDL device,
I found the following structure was being used to match
the device to a platform device while I was debugging the issue:
xf86_platform_devices[0] == Intel, /dev/dri/card1, primary platform device
xf86_platform_devices[1] == UDL, /dev/dri/card0
devList[0] == "Intel0", ZaphodHeads: DP1
devList[1] == "Intel1", ZaphodHeads: VGA1
devList[2] == "UDL"
devList[3] == "Intel2", ZaphodHeads: HDMI1 (intended GPU device to UDL)
When xf86platformProbeDev() matched the UDL device, the BusID
check failed in both cases of:
* BusID "usb:0:1.2:1.0" was specified
* Option "kmsdev" "/dev/dri/card0" was specified
As a result, xf86platformProbeDev() went on to call probeSingleDevice()
with xf86_platform_devices[0] and devList[2], resulting in the
UDL device being set up as a GPU device assigned to the first screen
instead of as a framebuffer on the third screen as the configuration
specified.
Checking Option "kmsdev" in code code may be a layering violation.
But the modesetting driver is actually part of the Xorg sources
instead of being an external driver, so he "kmsdev" path knowledge
may be used here.
Signed-off-by: Böszörményi Zoltán <zboszor@pr.hu>
In between the two phases introduced by the previous change. This makes
sure all pending drawing to the new buffers is flushed before they're
committed to the Wayland server.
The first phase sets the new surface properties for all damaged
windows, then the second phase commits all surface updates.
This is preparatory for the next change, there should be no observable
change in behaviour (other than the order of Wayland protocol
requests).
Reviewed-by: Adam Jackson <ajax@redhat.com>
Resulted in a build failure with -Werror:
../hw/xfree86/drivers/modesetting/drmmode_display.c: In function ‘drmmode_crtc_set_mode’:
../hw/xfree86/drivers/modesetting/drmmode_display.c:759:15: error: unused variable ‘screen’ [-Werror=unused-variable]
759 | ScreenPtr screen = crtc->scrn->pScreen;
| ^~~~~~
Fixes: c66c548eab "modesetting: Call glamor_finish from
drmmode_crtc_set_mode"
Reviewed-by: Adam Jackson <ajax@redhat.com>
I introduced this error with the MST hotplug code, but it can trigger
on zaphod setups, and is perfectly fine. There is no support for
MST/hotplug on zaphod setups currently, so we can just skip over
the dynamic connector handling here. However we shouldn't skip
over the lease handling so move it into the codepath.
Fixes: 9257b1252d ("modesetting: add dynamic connector hotplug support (MST) (v3)")
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
It flushes any pending drawing to the kernel, to make sure it'll be
visible to the Wayland server.
Without this, it was possible for the Wayland server to process surface
commits before Xwayland got around to flushing the corresponding
drawing, which could result in stale or even completely random window
contents being visible.
v2:
* Make EGL backend post_damage hook mandatory, don't check for NULL in
xwl_glamor_post_damage. (Olivier Fourdan)
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/951
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Avoids a crash in xf86RotatePrepare -> DamageRegister during
CreateScreenResources if rotation or another transform is configured for
any connected RandR output in xorg.conf. The generic rotation/transform
code generally can't work without the root window currently.
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/969
Fixes: 094f42cdfe "xfree86/modes: Call xf86RotateRedisplay from
xf86CrtcRotate"
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
xcb_aux_parse_color takes a non-const pointer, even though it doesn't
modify the string or take ownership of its memory.
Avoids the following warning from GCC:
../hw/kdrive/ephyr/hostx.c: In function ‘hostx_init’:
../hw/kdrive/ephyr/hostx.c:683:30: warning: passing argument 1 of ‘xcb_aux_parse_color’ discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers]
683 | if (!xcb_aux_parse_color("red", &red, &green, &blue)) {
| ^~~~~
In file included from ../hw/kdrive/ephyr/hostx.c:50:
/usr/include/xcb/xcb_aux.h:194:27: note: expected ‘char *’ but argument is of type ‘const char *’
194 | xcb_aux_parse_color(char *color_name,
| ~~~~~~^~~~~~~~~~
There's a free(name) at the end of the function.
GCC warned about this:
../hw/xfree86/loader/loadmod.c: In function ‘LoadModule’:
../hw/xfree86/loader/loadmod.c:702:18: warning: assignment discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers]
702 | m = name = "int10";
| ^
For the miClearDrawable prototype. Apparently it doesn't get pulled in
for some build configurations, breaking the build.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Since commit d8ec33fe05, an include on
glxvndabi.h has been added to hw/xfree86/common/xf86Init.c
However, if glx is disabled through --disable-glx and GLX headers are
not installed in the build's environment, build fails on:
In file included from xf86Init.c:81:
../../../include/glxvndabi.h:64:10: fatal error: GL/glxproto.h: No such file or directory
64 | #include <GL/glxproto.h>
| ^~~~~~~~~~~~~~~
Fix this failure by removing this include which does not seem to be
needed (an other option would have been to keep it under an ifdef GLXEXT
block)
Fixes:
- http://autobuild.buildroot.org/results/de838a843f97673d1381a55fd4e9b07164693913
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Fixes build failure.
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/954
Fixes: 89e32d00f6 "xwayland: Move Xwayland windows to its own sources"
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Calling rrGetScrPriv when RandR isn't initialized causes an assertion
failure that aborts the server:
Xorg: ../include/privates.h:121: dixGetPrivateAddr: Assertion `key->initialized' failed.
Thread 1 "Xorg" received signal SIGABRT, Aborted.
0x00007ffff78a8f25 in raise () from /usr/lib/libc.so.6
(gdb) bt
#0 0x00007ffff78a8f25 in raise () from /usr/lib/libc.so.6
#1 0x00007ffff7892897 in abort () from /usr/lib/libc.so.6
#2 0x00007ffff7892767 in __assert_fail_base.cold () from /usr/lib/libc.so.6
#3 0x00007ffff78a1526 in __assert_fail () from /usr/lib/libc.so.6
#4 0x00007ffff7fb57c1 in dixGetPrivateAddr (privates=0x555555ab1b60, key=0x555555855720 <rrPrivKeyRec>) at ../include/privates.h:121
#5 0x00007ffff7fb5822 in dixGetPrivate (privates=0x555555ab1b60, key=0x555555855720 <rrPrivKeyRec>) at ../include/privates.h:136
#6 0x00007ffff7fb586a in dixLookupPrivate (privates=0x555555ab1b60, key=0x555555855720 <rrPrivKeyRec>) at ../include/privates.h:166
#7 0x00007ffff7fb8445 in CreateScreenResources (pScreen=0x555555ab1790) at ../hw/xfree86/drivers/modesetting/driver.c:1335
#8 0x000055555576c5e4 in xf86CrtcCreateScreenResources (screen=0x555555ab1790) at ../hw/xfree86/modes/xf86Crtc.c:744
#9 0x00005555555d8bb6 in dix_main (argc=4, argv=0x7fffffffead8, envp=0x7fffffffeb00) at ../dix/main.c:214
#10 0x00005555557a4f0b in main (argc=4, argv=0x7fffffffead8, envp=0x7fffffffeb00) at ../dix/stubmain.c:34
This can happen, for example, if the server is configured with Xinerama
and there is more than one X screen:
Section "ServerLayout"
Identifier "crash"
Screen 0 "modesetting"
Screen 1 "dummy" RightOf "modesetting"
Option "Xinerama"
EndSection
Section "Device"
Identifier "modesetting"
Driver "modesetting"
EndSection
Section "Screen"
Identifier "modesetting"
Device "modesetting"
EndSection
Section "Device"
Identifier "dummy"
Driver "dummy"
EndSection
Section "Screen"
Identifier "dummy"
Device "dummy"
EndSection
The problem does not reproduce if there is only one X screen because of
this code in xf86RandR12Init:
#ifdef PANORAMIX
/* XXX disable RandR when using Xinerama */
if (!noPanoramiXExtension) {
if (xf86NumScreens == 1)
noPanoramiXExtension = TRUE;
else
return TRUE;
}
#endif
Fix the problem by checking dixPrivateKeyRegistered(rrPrivKey) before
calling rrGetScrPriv. This is similar to what the xf86-video-amdgpu
driver does:
fd66f5c0be/src/amdgpu_kms.c (L388)
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Commit cb1b1e184 modified msSharePixmapBacking() to derive modesettingPtr from
the 'screen' argument. Unfortunately, the name of the argument is misleading --
the screen is the slave screen. If the master is modesetting,
and the slave is not modesetting, it will segfault.
To fix the problem, this change derives modesettingPtr from
ppix->drawable.pScreen. This method is already used when calling
ms->glamor.shareable_fd_from_pixmap() later in the function.
To avoid future issues, this change also renames the 'screen' argument to
'slave'.
Signed-off-by: Alex Goins <agoins@nvidia.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Now that each source and header should be in order, we can safely cleaup
the last remaining bits from the main `xwayland.h` which is not needed
anymore and can be removed.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Move the Xwayland GLX declaration to its own header file.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Move the Xwayland vidmode declaration to its own header file.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Move the Xwayland CVT declaration to its own header file.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Move Xwayland screen related code to a separate source file and header.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Move the Xwayland cursor declarations to their own header file.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Move the Xwayland output declarations to their own header file.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Move the Xwayland input declarations to their own header file.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Move the Xwayland Present declarations to their own header file.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Move Xwayland generic pixmap code to a separate source file and header.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>