This adds new driver hooks to allocate scanout pixmaps and
changes the mode setting APIs to pass the new scanout pixmaps
along from DIX. DIX is responsible for reference counting the pixmaps
by tracking them through RRCrtcNotify.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
This provides a driver hook which can either completely replace, or
just validate the parameters for, the RRSetCrtcConfigs request.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
This implements sprite position transformations. Sprite image
transforms are passed all the way to the DDX layer, but the images are
not yet manipulated before being passed to the drivers.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
xf86CrtcSetModeTransform was starting to get ridiculous with 6
arguments, this change has it take a single structure that contains
all of those values along with a set of flags that says which have
changed.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
When the compat output is missing (I don't think this is actually
possible), or is disabled (and hence has no crtc), we would like to
avoid dereferencing NULL pointers. This patch creates inline functions
to extract the current compat output, crtc or associated RandR crtc
structure, carefully checking for NULL pointers everywhere.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Removing DGA ended up breaking any drivers calling into the old
xf86DiDGAInit function as it tried to see if DGA was already enabled
and ended up crashing if the VT wasn't completely initialized. Oops.
Also, if the driver initializes DGA itself, have the DiDGA
initialization overwrite that information as the DiDGA code will call
ReInit on mode detect.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
When the crtc transformation changes, the entire crtc must be repainted.
This was being done by clearing the shadow and then painting the rectangle
containing the screen image; the clear being required as the screen image
may not fill the crtc. When changing the transform rapidly, this leads to
flashing. Eliminate the clear by painting the entire crtc instead of just
the screen rectangle.
Signed-off-by: Keith Packard <keithp@keithp.com>
All symbols in installed sdk headers should be explicitly tagged
as exported symbols. Otherwise, to ensure it is not a mistake, one
could write it as something like:
extern /* NOEXPORT */ type name ...;
but the proper procedure really should be to use a non sdk header
(or a "noinst_" one).
This patch also removes prototypes to some functions that existed
only temporarily.
- Add active field to crtc.
- Set gamma (only) whenever a crtc becomes active.
- Check for xf86_config being NULL.
- Increase crtc abi to 3.
- A few other fixes.
- The Gamma values from the monitor section are now used during initial config.
- The old colormap system is disabled when gamma set hook is available.
- Gamma values are now persistent for the lifetime of the xserver.
- This requires no driver changes and should be driver ABI compatible.
The shadow frame buffer and other data used for rotation need to be freed
when the crtc is disabled, not just when rotation is disabled.
Signed-off-by: Keith Packard <keithp@keithp.com>
All .a libraries were converted to .la, and instead of linking the
Xorg binary with a mix of .a and .la, and adding some libraries more
then once in the command line, etc, now it generates a single libxorg.la
from all the required convenience libraries, and links with a dummy
xorg.c (that should usually be the file with the main function...).
This removes the requirement of some things like libosandcommon and
libinit, that existed to circumvent problems when linking multiple
.a and .la in the final Xorg binary.
The "symbol table" is now generated dynamically, by a shell script,
with an embedded gawk parser that parses cpp output. The new file
sdksyms.sh is generated by hand by analyzing all Makefile.am's and
making it create a sdksyms.c file, that includes all sdk headers that
will add symbols for the Xorg binary. Module headers aren't read, and
a in 2 files it was required to add a "<hash>ifndef XorgLoader" around
declarations shared between the Xorg binary and libextmod. A few
other changes were added to other sdk headers, like preventing
multiple inclusion, or including other headers to satisfy dependencies.
This should be a lot more portable, and better (hopefully properly)
using libtool to generate convenience libraries.
The attribute should be set on header files to make it easier to
manage what symbols are available to modules.
_X_EXPORT should be used in sources only for special cases, like
symbols that must be visible by non video/input driver/modules but
should not be "advertised" in the sdk.
Save in a few special cases, _X_EXPORT should not be used in C source
files. Instead, it should be used in headers, and the proper C source
include that header. Some special cases are symbols that need to be
shared between modules, but not expected to be used by external drivers,
and symbols that are accessible via LoaderSymbol/dlopen.
This patch also adds conditionally some new sdk header files, depending
on extensions enabled. These files were added to match pattern for
other extensions/modules, that is, have the headers "deciding" symbol
visibility in the sdk. These headers are:
o Xext/panoramiXsrv.h, Xext/panoramiX.h
o fbpict.h (unconditionally)
o vidmodeproc.h
o mioverlay.h (unconditionally, used only by xaa)
o xfixes.h (unconditionally, symbols required by dri2)
LoaderSymbol and similar functions now don't have different prototypes,
in loaderProcs.h and xf86Module.h, so that both headers can be included,
without the need of defining IN_LOADER.
xf86NewInputDevice() device prototype readded to xf86Xinput.h, but
not exported (and with a comment about it).
RandR matrix computations lose too much precision in fixed point;
computations using the inverted matrix can be as much as 10 pixels off.
Convert them to double precision values and pass those around. These API
changes are fairly heavyweight; the official Render interface remains fixed
point, so the fixed point matrix comes along for the ride everywhere.
Drivers that care about crtc positions on the screen to ensure that vblank
works correctly need to be notified when crtcs are changed.
Provide a hook in the mode setting code that is invoked whenever any
configuration is done to the screen.
Use this new hook in the DRI code so that DRI clients are notified and
receive updated information.
Signed-off-by: Keith Packard <keithp@keithp.com>
LeaveVT/EnterVT cycles will free/realloc shadow frame buffers. Because of
this, the presense/absence of that data is insufficient to know whether
the screen function wrappers are necessary. Instead, the 'transform_in_use'
flag should be used.
This patch also adds 'xf86RotateFreeShadow' for drivers to use at LeaveVT
time to free the rotation data; it will be reallocated on EnterVT.
By adding a new output callback, ->get_crtc, xf86SetDesiredModes is able to
avoid turning off outputs & CRTCs if the current output<->CRTC mappings are the
same as the desired configuration. This helps avoid flickering displays at
startup time, which speeds things up a little and looks better.
In order to report accurate values to users of the RandR property interface,
it's sometimes necessary to ask the driver to update the value (for example
when backlight brightness changes without the server's knowledge, due to hotkey
events or direct sysfs banging).
This patch wires up the core server code with a new xf86CrtcFuncs callback,
get_property, to allow for this.
The new code is available under the RANDR_13_INTERFACE define, which in turn
depends on the RANDR_12_INTERFACE code.
DRI uses a non-screen block/wakeup handler which will be executed after the
screen block handler finishes. To ensure that the rotation block handler is
executed under the DRI lock, dynamically wrap the screen block handler for
rotation.
By default, use the screen monitor section for output 0, however, a driver
can change which output gets the screen monitor by calling
xf86OutputUseScreenMonitor.
(cherry picked from commit f4a8e54caf)
The rotation state is stored in the xf86_config structure which is not
re-initialized at server reset time. Clean it up at CloseScreen time.
(cherry picked from commit f8db7665dc)
Rotation block handler was re-registering the rotation damage structure,
creating an infinite loop in the damage code. Track registration of the
damage structure to avoid this.
(cherry picked from commit b14f003b0e)
This moves most of the cursor management code out of the intel driver and
into the general server code. Of course, the hope is that this code will be
useful for other driver writers as well.
Check out xf86Crtc.h for the usage information, making sure you add the
needed hooks to the crtc funcs structure for your driver.
(cherry picked from commit 4d81c99a46)
xf86SetDesiredModes applies the desired modes to each crtc (as selected by
xf86InitialConfiguration initially and modified by successful mode settings
afterwards). For crtcs without a desired mode, pScrn->currentMode is used to
select something workable.
(cherry picked from commit bcade98cca)
This function applies a single mode to the screen (as from RandR 1.1,
XFree86-VidModeExtension or XFree86-DGA) using a policy that selects one
output to reconfigure to the requested mode and then makes all other outputs
fit within that size.
(cherry picked from commit 5a595c1f76)
