This is for glamor can support fd from DRM render node which is useful
for a render only DDX.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Qiang Yu <Qiang.Yu@amd.com>
Provide the function definition for systems that don't have it.
Signed-off-by: Matthieu Herrb <matthieu@herrb.eu>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
The input thread should generate events, not send them. Make it easier to
find the instances where it's doing so.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
This will be used by in-server features that need to react to property
changes. The first one will be _XWAYLAND_ALLOW_COMMITS.
Signed-off-by: Adam Jackson <ajax@redhat.com>
[Pekka: add commit message body]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
A client which is attended while a grab is blocking execution of its
requests needs to be placed in the saved_ready_clients list so that it
will get scheduled once the grab terminates. Otherwise, if the client
never sends another request, there is no way for it to be placed in
the ready_clients list.
v2: Wrap comment above mark_client_saved_ready.
Remove test for OS_COMM_IGNORED which will always be true.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99333
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
I think it is possible that output could get queued to a client during
CloseDownClient. After it is removed from the pending queue, active
grabs are released, the client is awoken if sleeping and any work
queue entries related to the client are processed.
To fix this, move the call removing it from the output_pending chain
until after clientGone has been set and then check clientGone in
output_pending_mark.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1382444
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Special case for the systemd-logind case in xfree86: when we're vt-switched
away and a device is plugged in, we get a paused fd from logind. Since we
can't probe the device or do anything with it, we store that device in the
xfree86 and handle it later when we vt-switch back. The device is not added to
inputInfo.devices until that time.
When the device is removed while still vt-switched away, the the config system
never notifies the DDX. It only runs through inputInfo.devices and our device
was never added to that.
When a device is plugged in, removed, and plugged in again while vt-switched
away, we have two entries in the xfree86-specific list that refer to the same
device node, both pending for addition later. On VT switch back, the first one
(the already removed one) will be added successfully, the second one (the
still plugged-in one) fails. Since the fd is correct, the device works until
it is removed again. The removed devices' config_info (i.e. the syspath)
doesn't match the actual device we addded tough (the input number increases
with each plug), it doesn't get removed, the fd remains open and we lose track
of the fd count. Plugging the device in again leads to a dead device.
Fix this by adding a call to notify the DDX to purge any remainders of devices
with the given config_info, that's the only identifiable bit we have at this
point.
https://bugs.freedesktop.org/show_bug.cgi?id=97928
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Add a valuator mask setter for setting absolute coordinate combined
with unaccelerated motion deltas. This will later be used by Xwayland
to combine a wl_pointer.motion() event with the unaccelerated delta of
a wp_relative_pointer.relative_motion() event.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This function will be called when a pointer is grabbed non-root window
set as the 'confineTo'. This will enable the ddx to handle the
confinement their own way.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
This new vfunc will be called, if set, after a client has issued a
WarpPointer request. This is necessary for implementing pointer warp
emulation in Xwayland.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
If windowsdriproto headers are available, build a Windows-DRI extension,
which supports requests to enable local clients to directly render GL to a
Windows drawable:
- a query to check if WGL is being used on a screen
- a query to map a fbconfigID to a native pixelformatindex
- a query to map a drawable to a native handle
Windows-DRI can only be useful if we are using WGL, so make an note if WGL
is active on a screen.
Make validGlxDrawable() public
Adjust glxWinSetPixelFormat() so it doesn't require a context, just a
screen and config.
That enables factoring out the deferred drawable creation code as
glxWinDeferredCreateDrawable()
Enhance glxWinDeferredCreateDrawable(), so that pixmaps are placed into a
file mapping, so they exist in memory which can be shared with the direct
rendering process.
Currently, this file mapping is accessed by a name generated from the XID.
This will not be unique across multiple server instances. It would perhaps
be better, although more complicated, to use an anonymous file mapping, and
then duplicate the handle for the direct rendering process.
Use glxWinDeferredCreateDrawable() to ensure the native handle exists for
the Windows-DRI query to map a drawable to native handle.
v2:
Various printf format warning fixes
v3:
Fix format warnings on x86
Move some uninteresting windows-dri output to debug log level
v4:
check for windowsdriproto when --enable-windowsdri
use windowsdriproto_CFLAGS
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Autoconf logic borrowed from glib
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
This is a preparation patch for adding prime hw-cursor support.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
poll provides per-fd notification of failure, so we don't need
CheckConnections anymore.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
There's no reason not to offer ridiculous numbers of clients; only a
few static data structures are arrays of this length.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Eliminates all of the fd_set mangling in the server main thread
v2: Listen for POLLOUT while writes are blocked.
v3: Only mark client not ready on EAGAIN return from read
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This converts the dispatch loop into using a list of ready clients
instead of an array. This changes the WaitForSomething API so that it
notifies DIX when a client becomes ready to read, instead of returning
the set of ready clients.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This provides a wrapper around poll or epoll providing a
callback-based interface for monitoring activity on a large set of
file descriptors.
v2: use xserver_poll API instead of poll. Don't use WSAPoll as
that is broken.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
v2: rename as 'xserver_poll' to avoid potential library name
collisions. Provide 'xserver_poll.h' which uses the system
poll where available and falls back to this emulation otherwise.
Autodetects when this is required, building the emulation only
then
Source: https://github.com/bmc/poll
Signed-off-by: Adam Jackson <ajax@redhat.com>
This provides a way to report errors on file descriptors that is
better defined than "any bits which are not READ or WRITE".
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The timeout resolution offered in the AdjustWaitForDelay call is
only milliseconds, so passing around the timeout as a pointer to a
struct timeval is not helpful. Doing everything in milliseconds up to
the point of the select call simplifies the code without affecting
functionality at all.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
All uses of these interfaces should instead be using the NotifyFd API
instead.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This removes the last uses of fd_set from the server interfaces
outside of the OS layer itself.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
With no users of the interface needing the readmask anymore, we can
remove it from the argument passed to these functions.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This new libXfont API eliminates exposing internal X server symbols to
the font library, replacing those with a struct full of the entire API
needed to use that library.
v2: Use libXfont2 instead of libXfont_2
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Adds typedefs for (*RRStartFlippingPixmapTrackingProcPtr),
(*RREnableSharedPixmapFlippingProcPtr),
and (*RRDisableSharedPixmapFlippingProcPtr) in randrstr.h.
Adds typedefs for (*PresentSharedPixmapProcPtr),
(*SharedPixmapNotifyDamageProcPtr),
(*RequestSharedPixmapNotifyDamageProcPtr), and
(*StopFlippingPixmapTrackingProcPtr) in scrnintstr.h.
Adds RR(Enable/Disable)SharedPixmapFlipping, and
RRStartFlippingPixmapTracking to rrScrnPrivRec.
Adds StopFlippingPixmapTracking, PresentSharedPixmap,
SharedPixmapNotifyDamage, and RequestSharedPixmapNotifyDamage to ScreenRec.
rrScrnPrivRec used for functions that use RandR-private data types, and
ScreenRec used for the rest.
RREnableSharedPixmapFlipping will allow the sink driver to setup for
flipping between two shared pixmaps.
RRDisableSharedPixmapFlipping will allow the sink driver to do teardown
associated with flipping between two shared pixmaps.
(RRStart/Stop)FlippingPixmapTracking are merely the double-buffered
equivalents of (Start/Stop)PixmapTracking, allowing the source driver to do
whatever setup and teardown necessary for presenting on the two shared
pixmaps.
PresentSharedPixmap is a function exposed by the source driver for the X
server or sink driver to call to request a present on a given shared
pixmap. This way, presents can be driven by the sink's vblank instead of a
timer or similar mechanism.
SharedPixmapNotifyDamage and RequestSharedPixmapNotifyDamage are OPTIONAL
(even for double-buffered PRIME) functions exposed by the sink driver and
the source driver, respectively. By calling
master->RequestSharedPixmapNotifyDamage(ppix), the sink driver can request
for the source driver to call slave->SharedPixmapNotifyDamage(ppix) in
response to damage on the master screen pixmap tracked by ppix.
v1: Initial commit
v2: Rename PresentTrackedFlippingPixmap to PresentSharedPixmap
Add SharedPixmapNotifyDamage / RequestSharedPixmapNotifyDamage
v3: Add RRCrtcPtr as a parameter to StartFlippingPixmapTracking
Move functions that use RandR-private data types to rrScrnPrivRec.
v4: Unchanged
v5: Add front and back parameters to RREnableSharedPixmapFlippingProcPtr
v6: Rebase onto ToT
v7: Unchanged
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Goins <agoins@nvidia.com>
A single provider can be both a offload and source slave at the same time,
the use of seperate lists breaks in this case e.g. :
xrandr --listproviders
Providers: number : 2
Provider 0: id: 0x7b cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 3 outputs: 2 associated providers: 0 name:modesetting
Provider 1: id: 0x46 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 2 outputs: 5 associated providers: 0 name:modesetting
xrandr --setprovideroutputsource 1 0x7b
xrandr --listproviders
Providers: number : 2
Provider 0: id: 0x7b cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 3 outputs: 2 associated providers: 1 name:modesetting
Provider 1: id: 0x46 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 2 outputs: 5 associated providers: 1 name:modesetting
xrandr --setprovideroffloadsink 1 0x7b
xrandr --listproviders
Providers: number : 3
Provider 0: id: 0x7b cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 3 outputs: 2 associated providers: 2 name:modesetting
Provider 1: id: 0x46 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 2 outputs: 5 associated providers: 2 name:modesetting
Provider 2: id: 0x46 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 2 outputs: 5 associated providers: 2 name:modesetting
Not good. The problem is that the provider with id 0x46 now is on both
the output_slave_list and the offload_slave_list of the master screen.
This commit fixes this by unifying all 3 lists into a single slaves list.
Note that this does change the struct _Screen definition, so this is an ABI
break. I do not expect any of the drivers to actually use the removed / changed
fields so a recompile should suffice.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
A new --with-fallback-input-driver=foo option allows selecting a
fallback driver for the server if the driver configured for the device
is not found. Note that this only applies when the device has a driver
assigned and that module fails to load, devices without a driver are
ignored as usual.
This avoids the situation where a configuration assigns e.g. the
synaptics driver but that driver is not available on the system,
resulting in a dead device. A fallback driver can at least provides some
functionality.
This becomes more important as we move towards making other driver true
leaf nodes that can be installed/uninstalled as requested. Specifically,
wacom and synaptics, a config that assigns either driver should be
viable even when the driver itself is not (yet) installed on the system.
It is up to the distributions to make sure that the fallback driver is
always installed. The fallback driver can be disabled with
--without-fallback-input-driver and is disabled by default on non-Linux
systems because we don't have generic drivers on those platforms.
Default driver on Linux is libinput, evdev is the only other serious
candidate here.
Sample log output:
[ 3274.421] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event4)
[ 3274.421] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad weird driver"
[ 3274.421] (II) LoadModule: "banana"
[ 3274.422] (WW) Warning, couldn't open module banana
[ 3274.422] (II) UnloadModule: "banana"
[ 3274.422] (II) Unloading banana
[ 3274.422] (EE) Failed to load module "banana" (module does not exist, 0)
[ 3274.422] (EE) No input driver matching `banana'
[ 3274.422] (II) Falling back to input driver `libinput'
.. server proceeds to assign libinput, init the device, world peace and rainbows
everywhere, truly what a sight. Shame about the banana though.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This is an ABI break, in that we now pass NULL to a function that hasn't
accepted it before.
Alex Goins had a different patch for this but it wasn't symmetrical, it
freed something in a very different place than it allocated it, this
attempts to retain symmetry in the releasing of the backing bo.
v2: use a new toplevel API, though it still passes NULL to something
that wasn't expecting it.
v3: pass -1 instead of 0.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Alex Goins <agoins at nvidia.com>
As the man page for the latter states:
The effects of signal() in a multithreaded process are unspecified.
We already have an interface to call sigaction() instead, use it.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
The xserver generates the key repeat by itself.
But when used with another server processing inputs first (e.g. a
Wayland compositor), the other server may be busy dealing with some
other things and not queue up key release events in time.
Add a vfunc in XkbSrvInfo to possibly add a check before re-emitting a
keypress event in the AccessX timer handler, so that the key repeat has
a chance to be denied if the server processing the input is not ready.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
By default the X server will try CLOCK_MONOTONIC_COARSE before
CLOCK_MONOTONIC, while A Wayland compositor may only support getting
their timestamps from the CLOCK_MONOTONIC clock. This causes various
issues since it may happen that a timestamp from CLOCK_MONOTONIC
retrieved before a sending an X request will still be "later" than the
timestamp the X server than gets after receiving the request, due to the
fact that CLOCK_MONOTONIC_COARSE has a lower resolution.
To avoid these issues, make Xwayland always use CLOCK_MONOTONIC, so
that it becomes possible for Wayland compositor only supporting
CLOCK_MONOTONIC and X server to use the same clock.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The current SIGIO signal handler method, used at generation of input events,
has a bunch of oddities. This patch introduces an alternative way using a
thread, which is used to select() all input device file descriptors.
A mutex was used to control the access to input structures by the main and input
threads. Two pipes to emit alert events (such hotplug ones) and guarantee the
proper communication between them was also used.
Co-authored-by: Fernando Carrijo <fcarrijo@freedesktop.org>
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
v2: Fix non-Xorg link. Enable where supported by default.
This also splits out the actual enabling of input threads to
DDX-specific patches which follow
v3: Make the input lock recursive
v4: Use regular RECURSIVE_MUTEXes instead of rolling our own
Respect the --disable-input-thread configuration option by
providing stubs that expose the same API/ABI.
Respond to style comments from Peter Hutterer.
v5: use __func__ in inputthread debug and error mesages.
Respond to style comments from Peter Hutterer.
v6: use AX_PTHREAD instead of inlining pthread tests.
Suggested by Emil Velikov <emil.l.velikov@gmail.com>
v7: Use pthread_sigmask instead of sigprocmask when using threads
Suggested by Adam Jackson <ajax@redhat.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This removes all of the SIGIO handling support used for input
throughout the X server, preparing the way for using threads for input
handling instead.
Places calling OsBlockSIGIO and OsReleaseSIGIO are marked with calls
to stub functions input_lock/input_unlock so that we don't lose this
information.
xfree86 SIGIO support is reworked to use internal versions of
OsBlockSIGIO and OsReleaseSIGIO.
v2: Don't change locking order (Peter Hutterer)
v3: Comment weird && FALSE in xf86Helper.c
Leave errno save/restore in xf86ReadInput
Squash with stub adding patch (Peter Hutterer)
v4: Leave UseSIGIO config parameter so that
existing config files don't break (Peter Hutterer)
v5: Split a couple of independent patch bits out
of kinput.c (Peter Hutterer)
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
When NumLock is on and a new keymap is applied, the next modifier state
change will turn off that LED (but leave the state enabled). The cause
for this is a bit convoluted:
* the SLI explicitState is copied from the current state in
ProcXkbGetKbdByName. Thus, if NumLock is on, that state is 0x2.
* on the next modifier key press (e.g. Shift), XkbApplyState() calls into
XkbUpdateIndicators() -> XkbUpdateLedAutoState() to update SLIs (if any)
for the currently changed modifier. But it does so with a mask only for
the changed modifier (i.e. for Shift).
* XkbUpdateLedAutoState() calculates the state based on this mask and
ends up with 0 because we don't have a Shift LED and we masked out the
others.
* XkbUpdateLedAutoState() compares that state with the previous state
(which is still 0x2) and then proceeds to turn the LED off
This doesn't happen in the normal case because either the mask
encompasses all modifiers or the state matches of the masked-out
modifiers matches the old state.
Avoid this issue by forcing an SLI update after changing the keymap.
This updates the sli->effectiveState and thus restores everything to
happy working order.
https://bugzilla.redhat.com/show_bug.cgi?id=1047151
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
The tablet pads have been separate kernel devices for a while now and
libwacom has labelled them with the udev ID_INPUT_TABLET_PAD for over a year
now. Add a new MatchIsTabletPad directive to apply configuration options
specifically to the Pad part of a tablet.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
We had HAVE_POSIX_FALLOCATE checks, but no such macros were ever
defined anywhere. This commit makes it so that this macro is defined if
the posix_fallocate is detected during configure.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
git commit f175cf45:
vidmode: move to a separate library of its own
introduced a regression where the xserver would not build when
xf86vidmodeproto is not installed even if the configure option
"--disable-xf86vidmode" is specified.
Fix build failure when xf86vidmodeproto is not installed.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
This patch introduces a new flag ATTR_KEY for hotplugged input devices,
so we can better distinguish between real keyboards (i.e. devices with
udev property ID_INPUT_KEYBOARD="1") and other key input devices like
lid switches, power buttons, etc.
All supported hotplug backends (udev, hal, and wscons) will set both
flags ATTR_KEY and ATTR_KEYBOARD for real keyboards, but udev backend
will set ATTR_KEY, but not ATTR_KEYBOARD, for non-keyboard key input
devices (hal and wscons will set both flags in any case). With this
distinction, kdrive input hotplugging mechanism will be allowed to only
grab real keyboards, as other key input devices are currently not
supported.
In order to don't break current behaviour, this patch will replace all
ATTR_KEYBOARD occurrences with ATTR_KEY in hw/xfree86/common/xf86Xinput.c.
[ajax: Just add ATTR_KEY, don't re-number the other attributes]
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Laércio de Sousa <laerciosousa@sme-mogidascruzes.sp.gov.br>
XVidMode extension might be useful to non hardware servers as well (e.g.
Xwayand) so that applications that rely on it (e.g. lot of older games)
can at least have read access to XVidMode.
But the implementation is very XFree86 centric, so the idea is to add
a bunch of vfunc that other non-XFree86 servers can hook up into to
provide a similar functionality.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=87806
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
To be able to reuse the VidMode extension in a non-hardware server, the
display mode definitions need to be accessible from DIX.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
