Pixel is CARD32, so inside the server has type unsigned int (x86_64) or unsigned
long (x86)
Cast to unsigned int and use a %u format
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Some Win32 API types are different fundamental types in the 32-bit and 64-bit
This problem is then further compounded by the fact that whilst both 32-bit
Cygwin and 32-bit MinGW use the ILP32 data model, 64-bit MinGW uses the LLP64
data model, but 64-bit Cygwin uses the LP64 data model.
This makes it impossible to write printf format specifiers which are correct for
all those targets, so we use some macros to provide the correct specifier for
the target.
LPARAM and WPARAM are integer types which can contain a pointer
LPARAM is long in ILP32 and long long in LLP64
WPARAM is unsigned int in ILP32 and unsigned long long in LLP64
Generally, these are just used to passs integer parameters, so for simplicity,
cast to int and use an int-compatible format
In the specific case of WM_CHANGECBCHAIN, they are used to pass HWND, so cast to
that type and print using an appropriate format.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Some Win32 API types are different fundamental types in the 32-bit and 64-bit
versions.
This problem is then further compounded by the fact that whilst both 32-bit
Cygwin and 32-bit MinGW use the ILP32 data model, 64-bit MinGW uses the LLP64
data model, but 64-bit Cygwin uses the LP64 data model.
This makes it impossible to write printf format specifiers which are correct for
all those targets
In the Win32 API, DWORD is an signed, 32-bit type. It is defined in terms of a
long, except in the LP64 data model, where it is an int.
It should always be safe to cast it to int and use %d.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Some Win32 API types are different fundamental types in the 32-bit and 64-bit
versions.
This problem is then further compounded by the fact that whilst both 32-bit
Cygwin and 32-bit MinGW use the ILP32 data model, 64-bit MinGW uses the LLP64
data model, but 64-bit Cygwin uses the LP64 data model.
This makes it impossible to write printf format specifiers which are correct for
all those targets
In the Win32 API, DWORD is an unsigned, 32-bit type. It is defined in terms of
an unsigned long, except in the LP64 data model, where it is an unsigned int.
It should always be safe to cast it to unsigned int and use %u or %x.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Window and Atom types derive from XID, which is always unsigned long in client
code, so use %ld format specifier
XTextProperty.nitems is of type unsigned long, so use %lu format specifier
ulReturnBytesLeft is of type unsigned long, so use %lu format specifier
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
remainingTime is computed as a long int, so use %ld format specifier
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
serverGeneration is of type unsigned long, so use %lu format specifier
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
struct winInfoRec.keyboard members are of type long, not type int
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
XID inside the server has type unsigned int (x86_64) or unsigned long (x86)
Follow the example of the rest of the server and cast to unsigned int and use
a %u or %x format.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
HWND derives from HANDLE, a pointer type, so we should use the %p format
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
The use of %d format for the DWORD return value of GetTickCount() isn't
portable, but it doesn't seem to be worth fixing it when this information isn't
very useful (and is redundant to the timestamping of log messages we now have)
Instead just remove these uses of GetTickCount()
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
This significantly reduces the amount of time it takes for xterm to start
up on a fresh X server with the radeonsi driver.
v2: Use GLYPHWIDTHBYTESPADDED instead of hardcoding 4 bytes glyph
alignment (Keith Packard)
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This fixes modesetting when glamor is disabled.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This should help people debugging when glamor does something stupid on
their driver.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Fixes regressions since Eric's "don't make an FBO for the glyph atlas"
change. The a1 upload was a fallback, as expected. However, fallback
reads use glReadPixels() because there's no glGetTexSubImage2D() to
match glTexSubImage2D(). We were just binding the 0 FBO value, so the
glReadPixels() would throw a GL error instead of getting any data.
After the fallback was done we'd write back the undefined data to the
atlas, blowing away the entire rest of the atlas because we didn't
specify any bounds on our prepare.
To fix the fallbacks to actually work, we'd need a prepare path that
allocates some memory memory do a full glGetTexImage() into, then
memcpy out of that. Instead, just dodge the general fallback by
implementing the specific upload we need to do here, which should also
be *much* faster at uploading a1 glyphs since it's not
readpixels/texsubimaging back and forth.
v3: Use CopyPlane to a temp pixmap for the upload
v4: Rewrite anholt's commit message to be from keithp's perspective
(changes by anholt)
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
This gives the compiler a chance to optimize when the data is never
changed -- for example, with pict_format_combine_tab, the compiler
ends up inlining the 24 bytes of data into just 10 more bytes of code.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
It's been unused since I killed glamor_download_pixmap_to_cpu().
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
It was apparently accidentally dropped in keithp's removal of _nf
functions in 90d326fcc6.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Above, we've already checked for ->fbo && ->fbo->fb and returned.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
v2: Don't forget to set priv->block_w/block_h like the wrapper used
to.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org> (v1)
This should hopefully keep the comments more up to date with the
structure comments. While I'm here, I've reworded a few of them to be
more accurate, and dropped a bunch of stale comments.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The code to set it was deleted in keithp's big rewrite.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Improves text rendering from about 284k glyphs per second to 320k
glyphs per second. There's no GL extension for probing this, because
of the philosophy of "Don't expose whether things are really in
hardware or not."
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Improves x11perf -aa10text performance by 1377.59% +/- 23.8198% (n=93)
on Intel with GLES2.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
We were only looking for the desktop GL version of the extension, so
GLES2 missed out.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
We use this for all of our other performance-sensitive rendering, too.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
The GL_QUADS helper takes a number of quads, not a number of vertices.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
According to
http://www.x.org/releases/X11R7.7/doc/xproto/x11protocol.html#requests:CreateWindow
"The border tile origin is always the same as the background tile
origin."
ChangeWindowAttributes goes to some effort to make sure it repaints
the border tile whenever the background origin may have changed, but
miPaintWindow was ignoring the background origin.
Found by xts XChangeWindowAttributes-3
Signed-off-by: Peter Harris <pharris@opentext.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Based on code by Keith Packard, Eric Anholt, and Jason Ekstrand.
v2:
- Fix double free and flip_count underrun (caught by Mario Kleiner).
- Don't leak flip_vblank_event on the error_out path (Mario).
- Use the updated ms_flush_drm_events API (Mario, Ken).
v3: Hack around DPMS shenanigans. If all monitors are DPMS off, then
there is no active framebuffer; attempting to pageflip will hit the
error_undo paths, causing us to drmModeRmFB with no framebuffer,
which confuses the kernel into doing full modesets and generally
breaks things. To avoid this, make ms_present_check_flip check that
some CRTCs are enabled and DPMS on. This is an ugly hack that would
get better with atomic modesetting, or some core Present work.
v4:
- Don't do pageflipping if CRTCs are rotated (caught by Jason Ekstrand).
- Make pageflipping optional (Option "PageFlip" in xorg.conf.d), but
enabled by default.
v5: Initialize num_crtcs_on to 0 (caught by Michel Dänzer).
[airlied: took over]
v6: merge async flip support from Mario Kleiner
free sequence after failed vblank queue
handle unflip while DPMS'ed off (Michel)
move flip tracking into its own structure, and
fix up reference counting issues, and add comments.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Since we are shipped with the server and the server has it built-in,
don't bother trying to load it.
Don't remove or invert the if statement on purpose as a later
patch adds stuff in here.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is a specialization of ms_drm_abort that matches based on the drm
event queue's sequence number.
Based on code by Keith Packard.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>