Stretch's Mesa is too far behind, and building Mesa to build xserver is
not the sort of problem we're trying to solve here. But our Travis
scripts run inside a docker image, and that image can be whatever, so
since I have to keep rawhide building anyway let's switch to that for
now. The dockerfile can be found at:
https://github.com/nwnk/xserver-travis
The $DISTRO part of the change is foreshadowing for the day we readd a
(probably sid-based) debian image; patches for other environments are
welcome.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Flagged by valgrind:
==13695== Conditional jump or move depends on uninitialised value(s)
==13695== at 0x22461C: RRNoticePropertyChange (rrproperty.c:150)
==13695== by 0x22461C: RRChangeOutputProperty (rrproperty.c:263)
==13695== by 0x222FC4: RROutputSetNonDesktop (rroutput.c:333)
==13695== by 0x22319C: RROutputCreate (rroutput.c:122)
==13695== by 0x1E1CE9: xf86RandR12CreateObjects12 (xf86RandR12.c:1734)
==13695== by 0x1E1CE9: xf86RandR12Init12 (xf86RandR12.c:2375)
==13695== by 0x1E1CE9: xf86RandR12Init (xf86RandR12.c:895)
==13695== by 0x1D469B: xf86CrtcScreenInit (xf86Crtc.c:778)
==13695== by 0xC095A54: RADEONScreenInit_KMS (radeon_kms.c:2436)
==13695== by 0x161444: AddGPUScreen (dispatch.c:3966)
==13695== by 0x1A3E46: InitOutput (xf86Init.c:763)
==13695== by 0x1654A7: dix_main (main.c:193)
==13695== by 0x7041A86: (below main) (libc-start.c:310)
==13695== Uninitialised value was created by a heap allocation
==13695== at 0x4C2CB8F: malloc (vg_replace_malloc.c:299)
==13695== by 0x223083: RROutputCreate (rroutput.c:83)
==13695== by 0x1E1CE9: xf86RandR12CreateObjects12 (xf86RandR12.c:1734)
==13695== by 0x1E1CE9: xf86RandR12Init12 (xf86RandR12.c:2375)
==13695== by 0x1E1CE9: xf86RandR12Init (xf86RandR12.c:895)
==13695== by 0x1D469B: xf86CrtcScreenInit (xf86Crtc.c:778)
==13695== by 0xC095A54: RADEONScreenInit_KMS (radeon_kms.c:2436)
==13695== by 0x161444: AddGPUScreen (dispatch.c:3966)
==13695== by 0x1A3E46: InitOutput (xf86Init.c:763)
==13695== by 0x1654A7: dix_main (main.c:193)
==13695== by 0x7041A86: (below main) (libc-start.c:310)
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This field was defined as a Bool in the protocol headers and BOOL in
xcb. Bool is not a valid type for protocol fields. It is defined as
'int' by Xdefs.h, which we expect to be 32-bits on all machines.
The protocol headers and xcb have patches posted to switch to CARD32,
which is at least well defined.
This change adds the necessary byte swapping to handle other-endian
clients with this 32-bit field, and then changes the request
processing to compare all 32-bits against zero so that it works with
both new and old clients.
On MSB machines, Xlib will continue to work properly, but old XCB will
not interoperate with the X server (either before or after this patch).
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Mihai Moldovan <ionic@ionic.de>
Reviewed-by: Adam Jackson <ajax@redhat.com>
If dri1/2/3 are configured for auto-detection, libdrm is required, as well
as the corresponding proto. (Practically we will always have the
corresponding protos now, as they are part of xorgproto).
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Otherwise this is broken on cygwin:
rrlease.c: In function ‘ProcRRCreateLease’:
rrlease.c:305:9: error: implicit declaration of function ‘WriteFdToClient’ [-Werror=implicit-function-declaration]
if (WriteFdToClient(client, fd, TRUE) < 0) {
Signed-off-by: Adam Jackson <ajax@redhat.com>
Copied from Mesa with no modifications.
Gives us Geminilake and Kaby Lake platform names updates and
sync on Coffee Lake PCI IDs.
Cc: Timo Aaltonen <timo.aaltonen@canonical.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
They're part of the 1.20 RC1 ABI, and actually used by external drivers.
Also, requiring drivers which don't support the new functionality in
DRI3 1.2 to switch to the new interfaces seems unreasonable.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Enable DRI3 v1.2 now that all functions have been implemented and
that there is at least one backend implementing the driver hooks
(modesetting/glamor).
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Using modifier might allow the driver to use a more optimal format
(e.g. tiled/compressed). Let's try to use those if possible.
v2: Don't filter out multi-plane modifiers
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Implement function added in DRI3 v1.1.
A newest version of libepoxy (>= 1.4.4) is required as earlier
versions use a problematic version of Khronos
EXT_image_dma_buf_import_modifiers spec.
v4: Only send scanout-supported modifiers if flipping is possible
v5: Fix memory corruption in XWayland (uninitialized pointer)
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
It relies on GBM >= 17.1.0 where we can import BO with multiple
planes and a format modifier (GBM_BO_IMPORT_FD_MODIFIER).
v2: Properly free fds in Xwayland
[Also add glamor_egl_ext.h to Makefile.am for distcheck's sake - ajax]
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Add support for 'check_flip2' so that the present core can know
why it is impossible to flip in that scenario. The core can then
let know the client that the buffer format/modifier is suboptimal.
v2: No longer need to implement 'check_flip'
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Use most optimal buffer format (e.g. tiled/compressed) available
for scanout.
v2: Don't use multi-plane modifier to create scanout buffer
v3: Add flag to retrieve modifiers set from enabled CRTCs only
v4: Fix uses when GBM/EGL driver doesn't support modifiers
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Retrieve IN_FORMATS property from the plane. It gives the
allowed formats and modifiers for BO allocation.
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
To make sure we also use the same primary plane and to avoid
mixing uses of two APIs, it is better to always use the atomic
modesetting API when possible.
v2: Don't use mode_output->connector_id
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This allows the uses of CCS compressed or tiled pixmaps as BOs when
page-flipping.
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
In order to flip between compressed and uncompressed buffers -
something drmModePageFlip explicitly bans us from doing - we need
to port use the atomic modesetting API. It's only 'fake' atomic
though given we still commit for each CRTC separately and
CRTC and connector properties are not set with the atomic API.
The helper functions to retrieve DRM properties have been borrowed
from Weston.
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Add 'check_flip2' hook for driver to let know the core
about why flipping is not possible ('reason').
If it is because of unsupported buffer format/modifier,
a PresentCompleteNotify event is sent to the client with
the PresentCompleteModeSuboptimalCopy mode.
v2: Check for PresentOptionSuboptimal and check driver version
before using 'check_flip2'.
v3: Only require one of 'check_flip' or 'check_flip2' to be
implemented by the driver.
Refactor reasons list to enum
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Initial implementation for DRI3 v1.1. Only the DRI3 implementation
is there, backends need to implement the proper hooks.
Version is still set to 1.0 so clients shouldn't use the new
requests yet.
v2: Use depth/bpp instead of DRM formats in requests
v3: Remove DMA fence requests from v1.1
Add screen/drawable modifier sets
v4: Free array returned by 'get_drawable_modifiers()'
v5: Fix FD leak
Signed-off-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Both autotools and meson build systems had complicated logic around
what version of libdrm to require for various options. Remove that and
just check for a new enough version to support all of the options
which need libdrm.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
RRSetChanged (immediately above) was immune to screens with no master,
but RRTellChanged was not:
Thread 1 "X" received signal SIGSEGV, Segmentation fault.
RRTellChanged (pScreen=<optimized out>) at ../../randr/randr.c:576
576 mastersp = rrGetScrPriv(master);
(gdb) bt
#0 RRTellChanged (pScreen=<optimized out>) at ../../randr/randr.c:576
#1 0x000055555566f1e9 in RRNoticePropertyChange (value=0x555555bfbf28, property=70, output=0x555555bfef10) at ../../randr/rrproperty.c:153
#2 RRChangeOutputProperty (output=output@entry=0x555555bfef10, property=<optimized out>, type=type@entry=19, format=format@entry=32, mode=<optimized out>, mode@entry=0, len=len@entry=1, value=0x7fffffffe77c, sendevent=1, pending=0)
at ../../randr/rrproperty.c:263
#3 0x000055555566dba5 in RROutputSetNonDesktop (output=output@entry=0x555555bfef10, nonDesktop=nonDesktop@entry=0) at ../../randr/rroutput.c:333
...
Reported-by: Michel Dänzer <michel@daenzer.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This adds support for RandR CRTC/Output leases through the modesetting
driver, creating a lease using new kernel infrastructure and returning
that to a client through an fd which will have access to only those
resources.
v2: Restore CRTC mode when leases terminate
When a lease terminates for a crtc we have saved data for, go
ahead and restore the saved mode.
v3: Report RR_Rotate_0 rotations for leased crtcs.
Ignore leased CRTCs when selecting screen size.
Stop leasing encoders, the kernel doesn't do that anymore.
Turn off crtc->enabled while leased so that modesetting
ignores them.
Check lease status before calling any driver mode functions
When starting a lease, mark leased CRTCs as disabled and hide
their cursors. Also, check to see if there are other
non-leased CRTCs which are driving leased Outputs and mark
them as disabled as well. Sometimes an application will lease
an idle crtc instead of the one already associated with the
leased output.
When terminating a lease, reset any CRTCs which are driving
outputs that are no longer leased so that they start working
again.
This required splitting the DIX level lease termination code
into two pieces, one to remove the lease from the system
(RRLeaseTerminated) and a new function that frees the lease
data structure (RRLeaseFree).
v4: Report RR_Rotate_0 rotation for leased crtcs.
v5: Terminate all leases on server reset.
Leases hang around after the associated client exits so that
the client doesn't need to occupy an X server client slot and
consume a file descriptor once it has gotten the output
resources necessary.
Any leases still hanging around when the X server resets or
shuts down need to be cleaned up by calling the kernel to
terminate the lease and freeing any DIX structures.
Note that we cannot simply use the existing
drmmode_terminate_lease function on each lease as that wants
to also reset the video mode, and during server shut down that
modesetting: Validate leases on VT enter
The kernel doesn't allow any master ioctls to run when another
VT is active, including simple things like listing the active
leases. To deal with that, we check the list of leases
whenever the X server VT is activated.
xfree86: hide disabled cursors when resetting after lease termination
The lessee may well have played with cursors and left one
active on our screen. Just tell the kernel to turn it off.
v6: Add meson build infrastructure
[Also bumped libdrm requirement - ajax]
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This lets a DRM client map between X outputs and kernel connectors.
v2:
Change CONNECTOR_ID to enum -- Adam Jackson <ajax@nwnk.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@nwnk.net>
Tracks changes to the non-desktop property so that when non-zero,
outputs will always appear to be disconnected.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@nwnk.net>
Save any value of the kernel non-desktop property in the xf86Output
structure to avoid non-desktop outputs in the default configuration.
[Also bump randrproto requirement to a version that defines
RR_PROPERTY_NON_DESKTOP - ajax]
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@nwnk.net>
At startup, we want to ignore non-desktop monitors unless we don't
find any desktop monitors. Because there are no DIX RandR resources
allocated, let the driver store this information in a new field in the
xf86Output structure and then use that value to help decide whether to
include an output as part of the default configuration.
v2:
Suggested-by: Michel Dänzer <michel@daenzer.net>
Bump XF86_CRTC_VERSION from 7 to 8. This will let out-of-tree
drivers know whether this field is available.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@nwnk.net>
glamor now supports depth 30, so allow use of it.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Antoine Martin <antoine@nagafix.co.uk>
This retains old behavior for depths <= 24, but allows gamma
table and colormap updates to work properly at depth 30.
This needs the xf86Randr12CrtcComputeGamma() fix for depth 30
from a previous commit to work. Otherwise the server will work,
but gamma table updates will silently fail, iow. the server
would always run with a default identity gamma lut.
v2: Simplify as proposed by Michel.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Antoine Martin <antoine@nagafix.co.uk> (v1)
At screen depths > 24 bit, the color palettes passed into
xf86Randr12CrtcComputeGamma() can have a larger number of slots
than the crtc's hardware lut. E.g., at depth 30, 1024 palette
slots vs. 256 hw lut slots. This palette size > crtc gamma size
case is not handled yet and leads to silent failure, so gamma
table updates do not happen.
Add a new subsampling path for this case.
This makes lut updates work again, as tested with the xgamma
utility (uses XF86VidMode extension) and some RandR based
gamma ramp animation.
v2: Better resampling when subsampling the palette, as
proposed by Ville. Now reaches the max index of the
palette and deals with non-power-of-two sizes. Thanks.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Antoine Martin <antoine@nagafix.co.uk> (v1)
Cc: <ville.syrjala@linux.intel.com>
Specifically for xrgb2101010 format.
Tested on KDE Plasma-5 with XRender based composite
acceleration backend. Much smoother and faster.
(v2) Dropped argb2101010, because of depth 32 confusion with
argb8888, as pointed out by Eric. Thanks!
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Antoine Martin <antoine@nagafix.co.uk>
This makes it work properly with OpenGL based desktop
compositing, as tested with EGL and GLX based compositing
under OpenGL-2/3, and also artifact free with XRender
based 2D compositing.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Antoine Martin <antoine@nagafix.co.uk>
Support x-screens of depth 30, so init doesn't fail.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Antoine Martin <antoine@nagafix.co.uk>
Turns out that the kernel DRM ioctl handling returns EINVAL
instead of ENOTTY if one tries to call the new drmCrtcGetSequence()
or drmCrtcQueueSequence() ioctl's introduced in Linux 4.15 on an
older kernel where they are missing. This causes the fallback code
not to fall back to the old drmWaitVblank() ioctl and thereby
failure of vblank stuff.
E.g., on Linux 4.13, glxgears -info runs unthrottled at 10000 fps
instead of 60 fps. Also breakage of OML_sync_control extension.
Check for errno != EINVAL before setting has_queue_sequence = TRUE.
Additionally in case of supported drmCrtcQueueSequence(), set
has_queue_sequence = TRUE on success, or we might get at
least a temporary failure in ms_queue_vblank().
One slight ambiguity is that we can also get EINVAL if
drm_crtc_vblank_get() fails in the kernel, so if that
happened at first invocation of the new api, we'd fall
back to drmWaitVblank() and then fail there, instead of
failing in the new api, but the end result would be the
same.
Fixes: 44d5f2eb8a ("xf86-video-modesetting: Support new vblank kernel API [v2]")
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Keith Packard <keithp@keithp.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
This plumbs the full width color for solid pictures through to fb, exa,
and glamor. External drivers and acceleration code may wish to make a
similar change for sufficiently new servers.
v2: Don't break ABI (Michel Dänzer)
v2.1: Use the (correct) full color in fb too (Michel Dänzer)
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
These guards were dropped by the commit below, but it turns out they're
needed. Fixes crash on VT switch.
Fixes: d8ec33fe05 ("glx: Use vnd layer for dispatch (v4)")
Bugzilla: https://bugs.freedesktop.org/105233
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
We would throw BadValue here for the GLX_SCREEN attribute. The upper
dispatch layer already checks this, we can ignore it here.
Signed-off-by: Adam Jackson <ajax@redhat.com>
This is mostly for the client library's convenience, if this extension
is listed then it can know the attribute won't be rejected. Note that we
don't honor this attribute for indirect contexts. That's fine, we don't
want to introduce undefined behavior into a potentially privileged
process.
v2: Remember to ignore the attribute (Eric Anholt)
Signed-off-by: Adam Jackson <ajax@redhat.com>
