DeleteInputDeviceRequest function doesn't handle "virtual" devices well.
TightVNC libvnc.so module to X (which makes bare Xorg VNC capable) uses such
kind of devices.
Bare Xvnc (it is something like Xvfb) simply uses AddInputDevice &
RegisterDevice functions. Xvnc uses DeleteInputDeviceRequest from Xi/stubs.c
so everything works fine (now I see that DeleteInputDeviceRequest in
Xi/stubs.c should call RemoveDevice function, shouldn't it? :) )
Situation is quite different when you use libvnc.so module. It uses same
schema as Xvnc, so it simply calls AddInputDevice & RegisterDevice. Thus
device is created correctly. When server is terminated it calls
DeleteInputDeviceRequest (now from hw/xfree86/common/xf86Xinput.c) for each
device. Here is the difference - Xvnc calls DeleteInputDeviceRequest from
Xi/stubs.c as I wrote above. Thus Xorg gets sigsegv because "VNC" devices
don't have real input driver.
X.Org Bug 20087 <http://bugs.freedesktop.org/show_bug.cgi?id=20087>
[This isn't really a fix (libVNC should behave correctly) but not crashing the
server sounds like an improvement.]
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
With the API change, we can now purge the XI conversion from POE.
Note: this commit breaks DGA even more.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Note that this breaks DGA. Life is tough.
EnqueueEvent is a somewhat half-baked solution, we immediately drop back into
XI and store them. But it should in theory work.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Don't let the dcce be random data.
Extensions section was added in X11R6.8.0 and documented in the release notes:
http://www.x.org/archive/X11R6.8.0/doc/RELNOTES2.html#3
but never made it into the man page.
Also fix a bonus typo.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Was only used to provide a list of input devices that XF86-Misc could use,
now that XF86-Misc is gone, was parsed and logged, then completely ignored.
(Depends on previous patch that introduces OBSOLETE_TOKEN in parser to
make obsolete keywords like InputDevices & RgbPath be non-fatal errors.)
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Acked-by: Adam Jackson <ajax@redhat.com>
Xorg shouldn't refuse to run just because the user has an xorg.conf that
had the previously-used RgbPath keyword in it.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
When the crtc transformation changes, the entire crtc must be repainted.
This was being done by clearing the shadow and then painting the rectangle
containing the screen image; the clear being required as the screen image
may not fill the crtc. When changing the transform rapidly, this leads to
flashing. Eliminate the clear by painting the entire crtc instead of just
the screen rectangle.
Signed-off-by: Keith Packard <keithp@keithp.com>
a9d7d659.. (PCI: Remove pciBusAddrToHostAddr and associated nonsense)
removes pciBusAddrToHostAddr(), but not its prototype, resulting in:
./.libs/libxorg.a(sdksyms.o):(.data.rel+0xe64): undefined reference to
`pciBusAddrToHostAddr'
Signed-off-by: Chris Ball <cjb@laptop.org>
This was all a glorified no-op. We rely on pciaccess to create device
maps anyway, so we should have no reason to care about what the host
address is.
Acked-by: Ian Romanick <ian.d.romanick at intel.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
All you get for standard timing descriptors is horizontal size in
multiples of 8 pixels (which means you can't say 1366) and height in
terms of aspect ratio (which means you can't say 768). You'd like to
just fuzzy-match this by walking the DMT list for sufficiently close
modes, but you can't because DMT is useless and only defines a 1360x768
mode, because it's _also_ specified in terms of character cells despite
providing pixel exact timings. Neither can you use CVT or GTF to
generate the timings, because they _also_ believe that modes have to be
a multiple of 8 pixels.
You'd also hope you could find a timing definition for this in CEA, but
you can't because CEA only defines transmission formats that actually
exist. So there's 480p, 720p, and 1080p, but no 768p. And why would
there be, after all, the encoded signal is never 768p so obviously no
one would ever make a display in that format.
So instead, make a CVT mode since that's likely to be handled well by
just about everything, smash the horizontal active down by 2, and shift
the sync pulse by 1. Underscanning the hard way.
Pass the suicide.
Otherwise drivers have to refuse interlace twice: once in the output
config, and once in ->valid_mode() to catch output and config modes.
If you can't do interlaced modes, asking nicely for it in the config
isn't going to suddenly make it work.
By making the "Unable to open config file" header a warning, it was
not appearing with the filename when a config file was specified and
not found. Now we make it an error message again, but only issue
the error if a filename was specified - if none was specified, then
we don't even issue a warning, just the "Using autoconfig" info message.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
With trying to match depths so that you didn't end up with a depth 24
fbconfig for the 32-bit composite visual, I broke the alpha bits on the depth
24 X visual, which angered other applications. But in fixing that, the
pickFBconfigs code for "minimal" also could end up breaking GLX visuals if
the same FBconfig was chosen for more than one X visual.
We have no reason to not expose as many visuals as possible, but the old
"all" mode didn't match any existing X visuals to GLX visuals, so normal
GL apps didn't work at all.
Instead, replace it with a simple combination of the two modes: Create GLX
visuals by picking unique FBconfigs with as many features as possible for
each X visual in order. Then, for all remaining FBconfigs that are
appropriate for display, add a corresponding X and GLX visual.
This gets all applications (even ones that aren't smart enough to do FBconfigs)
get all the options to get the visual configuration they want. The only
potential downside is that the composite ARGB visual is unique and gets a
nearly full-featured GLX visual (except that the root visual might have taken
the tastiest FBconfig), which means that a dumb compositing manager could
waste resources. Write compositing managers using FBconfigs instead, please.
This patch gets the shadow scanout buffer repainted on panning area changes.
It does not, however, track the mouse correctly.
Signed-off-by: Keith Packard <keithp@keithp.com>
When the shadow scanout buffer can be re-used, the underlying framebuffer
area must be damaged so that the scanout will be repainted. This patch
delays the addition of that damaged area until after the transform in the
crtc has been updated, otherwise the old transform would have been used and
the wrong area repainted.
Signed-off-by: Keith Packard <keithp@keithp.com>
generic.c:80: warning: ‘read_legacy_video_BIOS’ defined but not used
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
xf86IsOptionSet is rarely the right function to use for boolean options because
it returns TRUE whenever the option is present, even if its value is "no",
"off", "0", etc.
This avoids 32-bit access which might affect other registers. The linux code
uses gcc flags to get this to happen, but this seems like more of a sure thing.
Drivers not using the new hw/xfree86/modes code would crash in DRI due to
that code trying to monitor CRTC changes.
Signed-off-by: Keith Packard <keithp@keithp.com>
We report the EDID values in RandR, and we let people configure whatever
they like for the screen in xorg.conf. Reporting the EDID values in the core
means applications get inconsistent font sizes in the default configuration.
Signed-off-by: Keith Packard <keithp@keithp.com>
In the X log, upon module load, it prints a line similar to the following.
> (II) Loading /usr/lib64/xorg/modules/extensions//libdbe.so
The attached patch removes the extra / before the module name.
Code already exists in hw/xfree86/loader/loadmod.c:InitPathList to add a
trailing slash if needed, removing the one added by sprintf is harmless.
Signed-off-by: James Cloos <cloos@jhcloos.com>
Otherwise, for example, when hacking config/*.c, it is required to
run make clean on that directory, to ensure the proper libconfig.a
will be linked in the generated Xorg binary.