Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Move some variables to the scope where they are used.
Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Previously some sort of absolute coordinates were sent out in
the padding of the DGA2 Motion and Button events. DGAMouseX
and DGAMouseY were used to keep track of said coordinates.
libXxf86dga doesn't use that data for anything, and at least
git history didn't show any past usage either. So let's just
remove the last remnants of of this mess.
Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Copy dx/dy from the internal event to the DGA2 Motion/Button events.
Do the same for Key events for the sake of keeping the code consistent.
Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
mieq_installed is used as a boolean, so why not make it such. Also
it's a static variable, so the the explicit zero initialization can
be removed.
Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Remove the handler only if it was installed. Also mark it as
uninstalled, otherwise it wouldn't get reinstalled after a
server reset.
Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
The ET_DGAEvent handler is only installed when a client
requests relative events via DGA1. Do it also when a client
requests DGA2 events.
Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
DGA key event support was lost in commit
8da0ff2d51. Bring it back.
Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
When XkbChangeEnabledControls is called to disable key repetition of a
certain key (or keys), currently ongoing repetition of that key was
not cancelled. It was cancelled if ChangeKeyboardControl was used to
disable key repetition globally.
Reviewed-by: Rami Ylimäki <rami.ylimaki@vincit.fi>
Reviewed-by: Dirk Wallenstein <halsmit@t-online.de>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This is clearly meant to short-circuit the (modestly) expensive resource
lookup in LegalNewID. The problem is that long-lived clients will
eventually run completely through their XID space and start asking
XC-MISC for IDs to reuse. Once that happens, the comparison against
expectID will always be true, and we'll no longer catch XID collisions
at all.
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
We can return from WaitForSomething with no clients ready for any number
of reasons. There's no reason to set up the scheduler timer when this
happens.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
xdmxconfig.c: In function ‘dmxConfigCanvasDraw’:
xdmxconfig.c:299:23: warning: ‘maxHeight’ may be used uninitialized in this function
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
dmxinputinit.c: In function ‘dmxBlockHandler’:
dmxinputinit.c:610:44: warning: cast from pointer to integer of different size
dmxinputinit.c: In function ‘dmxWakeupHandler’:
dmxinputinit.c:637:41: warning: cast from pointer to integer of different size
dmxinputinit.c: In function ‘dmxInputInit’:
dmxinputinit.c:1041:36: warning: cast to pointer from integer of different size
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
dmxinputinit.c: At top level:
dmxinputinit.c:135:29: warning: ‘DMXCommonOth’ defined but not used
DMXCommonOth is actually mentioned in a #if 0 block, so delete it and
the block that references it. If anyone needs it, git remembers.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
dmxgc.c: In function ‘dmxChangeClip’:
dmxgc.c:386:5: warning: case label value exceeds maximum value for type
dmxgc.c:387:5: warning: case label value exceeds maximum value for type
dmxgc.c:388:5: warning: case label value exceeds maximum value for type
dmxgc.c:389:5: warning: case label value exceeds maximum value for type
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Dear gcc: I do not care about machines where sizeof(void *) <
sizeof(int), and neither should you.
dmxextension.c: In function ‘dmxBECreateResources’:
dmxextension.c:858:26: warning: cast from pointer to integer of different size
dmxextension.c: In function ‘dmxBERestoreRenderPict’:
dmxextension.c:1062:29: warning: cast from pointer to integer of different size
dmxextension.c: In function ‘dmxBERestoreRenderGlyph’:
dmxextension.c:1084:35: warning: cast from pointer to integer of different size
dmxextension.c: In function ‘dmxAttachScreen’:
dmxextension.c:1277:8: warning: cast to pointer from integer of different size
dmxextension.c:1286:34: warning: cast to pointer from integer of different size
dmxextension.c:1292:35: warning: cast to pointer from integer of different size
dmxextension.c: In function ‘dmxBEDestroyResources’:
dmxextension.c:1456:26: warning: cast from pointer to integer of different size
dmxextension.c: In function ‘dmxDetachScreen’:
dmxextension.c:1599:8: warning: cast to pointer from integer of different size
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
enabled_ctrls_changes nowhere near the usual event or config paths. So this
condition always evaluated to false and the memcpy would thus never been
hit. As a result, any modification to the XKB struct during
XkbUpdateDescActions was not reflected in the kbdfeed ctrls.
The flag that is set by XkbUpdateDescActions() if ctrls were changed are in
enabled_ctrls.
This mainly affected keyboard repeat control as XKB uses the kbdfeed ctrls,
not XKB's per_key_repeats, to determine if a key needs to be repeated. Thus,
adding a "repeat= False" to the XKB map of any action did not have any
effect.
Test case:
assign Mode_switch to any key that by default repeats, e.g. the menu key.
key <COMP> { [ Mode_switch ] };
Then modify the Mode_switch action to not repeat the key.
interpret Mode_switch+AnyOfOrNone(all) {
virtualModifier= AltGr;
useModMapMods=level1;
action= SetGroup(group=+1);
// Add this line
repeat= False;
};
Though the flags are correctly reflected in the description loaded in the
server, the change is not handed back to the kbdfeed struct and XKB will
trigger softrepeats of this key.
This patch also adds two explanatory comments and an extra check, as this
path may be hit before the CtrlProc for the kbdfeed struct is set.
Red Hat Bug 537708 <https://bugzilla.redhat.com/show_bug.cgi?id=537708>
Also fixes broken auto-repeat of the backspace key in the colemak layout
(mapped to CapsLock).
X.Org Bug 16318 <http://bugs.freedesktop.org/show_bug.cgi?id=16318>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Dirk Wallenstein <halsmit@t-online.de>
Reviewed-by: Dirk Wallenstein <halsmit@t-online.de>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Simon Thum <simon.thum@gmx.de>
Fix winShadowUpdateDD(|NL) so we don't try to blit to primary surface if it didn't get allocated
(Intel drivers, in particular, seem to like to issue a WM_DISPLAYCHANGE during a suspend/resume
cycle, but not allow surface to be allocated right then)
Also:
Use winReleasePrimarySurfaceShadowDD(|NL) in winFreeFBShadowDD(|NL) rather than open coding it
Don't mess about recreating surface if we're going to resize it anyhow
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Make ShadowGDI drawing engine only change the size of the screen
pixmap/shadow framebuffer on an RANDR change, not the bpp/depth
as well.
The server requires the screen pixmap's depth to be invariant.
Other drawing engines aren't quite as affected by this issue as
they won't draw to the display, if it has changed colour depth,
but probably still need some attention.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
This is only relevant to pre-NT versions of Windows, which are all EOL.
Also, it's in the wrong place now as framebuffer can get resized.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Fortunately, these swapped constants are benign as they have the same
value, 0
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Don't turn off -multiplemonitors when all monitors don't have the
same pixel format and when using shadow GDI engine, just warn that
performance may be degraded
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
When RANDR resizing is enabled, generate an internal RANDR change when
WM_DISPLAYCHANGE occurs in rootless modes for screens which occupy an
entire monitor or the virtual desktop.
Store the monitor number and use that to handle WM_DISPLAYCHANGE for a
screen specified with '-screen @monitor'
In rooted mode, WM_DISPLAYCHANGE isn't relevant (except where display
depth changes may cause problems). (A maximized screen window will get
WM_SIZE to adjust it to the new monitor size)
In rooted fullscreen mode, WM_DISPLAYCHANGE shouldn't be seen, as we
have the resolution we have selected for the fullscreen session)
(Could client randr requests be handled in fullscreen to cause a change
of the fullscreen resolution? )
Don't bother do a RANDR resize if the dimensions aren't actually changing
when WM_DISPLAYCHANGE is sent (should handle WM_DISPLAYCHANGE to size 0x0
that the intel driver seems to like to send)
Various debug output improvements
Also, remove the note that XWin can't handle display mode changes from
the man page
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
To avoid recursion, WM_SIZE requests shouldn't generate XRANDR requests
when no change is neeeded.
We do the actual resize on WM_EXITSIZEMOVE, as resizing occurs in
a modal loop, to avoid a backlog of resize events building up as
the X server doesn't get a change to process anything until the resize
is completed.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Implement framebuffer resizing in RANDR extension:
Resize the frame buffer, the screen's root window and the native window
containing the root window image.
Correctly allow for decorations in new native window size when resizing native window
to fit the new framebuffer size with AdjustWindowRectEx()
Update physical size info for a screen when it is changed by RANDR
Forbid client-requested RANDR changes in fullscreen and rootless modes
Only resize window on an external RandR request, to avoid recursing on
a WM_SIZE requested resize.
Also, add prototypes for winRandRInit() and winDoRandRScreenSetSize() to header file
Also, update the author list and copyright for winrandr.c
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Add -resize command line option to configure how native window sizing frame
is used.
In additions to the existing fixed and scrollbars modes, add a new mode to
allow framebuffer to be resized using native window frame
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Move QueryMonitor() out of windprocarg.c into a new file, winmonitors.c,
as we use to use it from other places as well
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Remove an attempt at the rather difficult optimization of detecting
if WM_DISPLAYCHANGE affects any of the monitors which intersect the
native window for the X screen.
We'll always act as if it does, which it probably usually the case.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
(This stored calculation was wrong if -dpi came after -screen on the command
line, anyhow)
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Refactor the drawing engines so we can explicitly allocate and release the framebuffer for a screen
Move the setting of dwPaddedWidth into the DDNL engine, so it is updated when the framebuffer changes size
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Some trivial build fixes required
Also fill out all function pointers for primaryfb engine
Also tidy up the man page section describing drawing engines.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Was previously used for _PATH_VARTMP, but that was removed in
534fc5140b
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Following the convention makes it easier to locate man pages,
user's or developer's documentation and specifications.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Makefile.am: there are only 4 string substitutions to be done in this file.
SED is much simpler than the C pre processor which adds its own
strings which must be substituted by sed, still.
xorgconf.cpp: replaced __xconfigfile__ with xorg.conf as this file name
is hard coded in the xserver configuration and cannot change.
Replace XCOMM with # permanently.
Delete cpprules.in as it isn't used anywhere else. Should one need
cpprules for real cpp work, there is one in Xquartz from which the
the old man pages code have been stripped.
Fix trailing spaces.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Create a manpages.am makefile snippet in the root dir.
Each man page makefile includes manpages.am.
Now all man pages in xserver are generated the same way
using the same method as all of other xorg modules.
All ".man.pre" files in git are ".man" now.
Links are no longer created between different file types.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>