It's going to multiply anyway, so if we have non-constant values, might
as well let it do the multiplication instead of adding another multiply,
and good versions of calloc will check for & avoid overflow in the process.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
No modern driver pays attention to this. Presumably there existed
hardware once where you couldn't just read the right values out of the
CRTC.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Just for consistency, I'm pretty sure the code is generally not happy for
malloc failures anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Only Xorg -configure uses a hardcoded value here, so let's not change the rest
of the server for that.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
The only place this isn't allocated is during Xorg -configure where we just
statically assing "mouse"/"kbd" and the identifiers for it. Everywhere else
it's strdup'd and then free'd already.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Make lots of string pointers 'const char' so that we can use constant
strings with them without eliciting warnings.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
After fc3ab84d the pVideo field in DevToConfig[i] is no longer
initialized, so it's always NULL. This causes the duplicate finding
algorithm in the beginning of the function to not work anymore as it
is based on this field.
The symptom of this bug is that X -configure reports
Number of created screens does not match number of detected devices.
Configuration failed.
Server terminated with error (2). Closing log file.
rather than producing a working config file.
This patch fixes that bug by initializing the field before calling
xf86PciConfigureNewDev().
Cc: tvignatti@gmail.com
Signed-off-by: Soren Sandmann <ssp@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This is a really awkward interface, since we're calling it well before
the driver knows what device it's going to drive. Drivers with both KMS
and UMS support therefore don't know whether to say they need I/O port
access or not, and have to assume they do.
With this change we now call it only to query whether port access might
be needed; we don't use that to determine whether to call a driver's
probe function or not, instead we call them unconditionally. If the
driver doesn't check whether port access was enabled, they might crash
ungracefully. To accomodate this, we move xorgHWAccess to be explicitly
intentionally exported (sigh xf86Priv.h) so that drivers can check that
before they attempt port access.
v2: Move initial xf86EnableIO() nearer the logic that determines whether
to call it, suggested by Simon Farnsworth.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This is strictly the application of the script 'x-indent-all.sh'
from util/modular. Compared to the patch that Daniel posted in
January, I've added a few indent flags:
-bap
-psl
-T PrivatePtr
-T pmWait
-T _XFUNCPROTOBEGIN
-T _XFUNCPROTOEND
-T _X_EXPORT
The typedefs were needed to make the output of sdksyms.sh match the
previous output, otherwise, the code is formatted badly enough that
sdksyms.sh generates incorrect output.
The generated code was compared with the previous version and found to
be essentially identical -- "assert" line numbers and BUILD_TIME were
the only differences found.
The comparison was done with this script:
dir1=$1
dir2=$2
for dir in $dir1 $dir2; do
(cd $dir && find . -name '*.o' | while read file; do
dir=`dirname $file`
base=`basename $file .o`
dump=$dir/$base.dump
objdump -d $file > $dump
done)
done
find $dir1 -name '*.dump' | while read dump; do
otherdump=`echo $dump | sed "s;$dir1;$dir2;"`
diff -u $dump $otherdump
done
Signed-off-by: Keith Packard <keithp@keithp.com>
Acked-by: Daniel Stone <daniel@fooishbar.org>
Acked-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Since all we do with the option list is walk down the list printing
the names, there's no need to cast away its constness.
Clears gcc warning:
xf86Configure.c: In function 'DoShowOptions':
xf86Configure.c:781:4: warning: cast discards qualifiers from pointer target type
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Gets rid of duplicate static copy of optionTypeToString by putting
both callers of that helper function in the same source file.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
--disable-pciaccess, used together with --disable-module-int10, can be used to
disable all pci code inside the server.
Note that XSERVER_LIBPCIACCESS was previously used only in the driver side and
now it defines also whether the library is used inside the server. Also,
XORG_BUS_PCI automake variable is introduced to track PCI code needs.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Instead of just closing the log when everything is done, put one more
message in stating that we're actually terminating. Users or scripts that
look at the Xorg.log will then know that a) the server has terminated
properly and b) why the server terminated (to some degree, given that most
real-world errors will be caused by AbortServer()).
Acked-by: Gaetan Nadon <memsize@videotron.ca>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This has never been buildable in any modular server release.
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This patch makes xf86Configure.c free of PCI and SBUS code, moving to a more
meaningful location.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Although vendor and board naming are used to create the configure file, the
server doesn't actually use it when fetching such file and probing devices.
Reported-by: Richard Barnette <jrbarnette@chromium.org>
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Tested-by: Richard Barnette <jrbarnette@chromium.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
This function had a wrong name and was just logging the primary device. No one
cares about it honestly.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Because we don't want anyone to get hurt.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
It's RAC remnant. This was substituted by xf86VGAarbiter{Lock, Unlock}
mechanism.
It's an API break, but the few drivers using it were covered already with
macros to avoid problems.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
In some cases, an option of "50%" would be preferable over fixed value
configuration - especially if the actual values are autoprobed.
Add a new set of functions to parse percent values from configurations.
The percent value parsing differs slightly - if the option is not to marked
as used (e.g. xf86CheckPercentOption()), no warning is emitted to the log
file if the value is not a percent value. This allows double-options (either
as % or as absolute number) without warnings.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The only remaining X-functions used in server are XNF*, the rest is converted to
plain alloc/calloc/realloc/free/strdup.
X* functions are still exported from server and x* macros are still defined in
header file, so both ABI and API are not affected by this change.
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
buffer_alloc: Called allocating function "realloc" which allocated memory dictated by parameter "len + strlen(displaySize_string)"
alloc_strlen: Allocated memory does not have space for the terminating NUL of the string
var_assign: Assigned "ptr->mon_comment" to storage allocated by "realloc(ptr->mon_comment, len + strlen(displaySize_string))"
Signed-off-by: Oliver McFadden <oliver.mcfadden@nokia.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
When testing if an fd is valid, the required construct is >= 0, not > 0.
[Daniel: Fixed up the Linux MTRR case as well.]
Signed-off-by: Martin Ettl <ettl.martin@gmx.de>
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
The xorg.conf generator was not assigning correctly the primary device
("bootable") as screen zero. So just skip this kind of routines for now.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Inside a windowing system, it's not the place to probe for devices. Goodbye
-probe and -probeonly.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
This changes the ABI, but since the video ABI is at 6 already
it should be fine.
driver changes are in the pipeline after this.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Save in a few special cases, _X_EXPORT should not be used in C source
files. Instead, it should be used in headers, and the proper C source
include that header. Some special cases are symbols that need to be
shared between modules, but not expected to be used by external drivers,
and symbols that are accessible via LoaderSymbol/dlopen.
This patch also adds conditionally some new sdk header files, depending
on extensions enabled. These files were added to match pattern for
other extensions/modules, that is, have the headers "deciding" symbol
visibility in the sdk. These headers are:
o Xext/panoramiXsrv.h, Xext/panoramiX.h
o fbpict.h (unconditionally)
o vidmodeproc.h
o mioverlay.h (unconditionally, used only by xaa)
o xfixes.h (unconditionally, symbols required by dri2)
LoaderSymbol and similar functions now don't have different prototypes,
in loaderProcs.h and xf86Module.h, so that both headers can be included,
without the need of defining IN_LOADER.
xf86NewInputDevice() device prototype readded to xf86Xinput.h, but
not exported (and with a comment about it).
This is the biggest "visibility" patch. Instead of doing a "export"
symbol on demand, export everything in the sdk, so that if some module
fails due to an unresolved symbol, it is because it is using a symbol
not in the sdk.
Most exported symbols shouldn't really be made visible, neither
advertised in the sdk, as they are only used by a single shared object.
Symbols in the sdk (or referenced in sdk macros), but not defined
anywhere include:
XkbBuildCoreState()
XkbInitialMap
XkbXIUnsupported
XkbCheckActionVMods()
XkbSendCompatNotify()
XkbDDXFakePointerButton()
XkbDDXApplyConfig()
_XkbStrCaseCmp()
_XkbErrMessages[]
_XkbErrCode
_XkbErrLocation
_XkbErrData
XkbAccessXDetailText()
XkbNKNDetailMaskText()
XkbLookupGroupAndLevel()
XkbInitAtoms()
XkbGetOrderedDrawables()
XkbFreeOrderedDrawables()
XkbConvertXkbComponents()
XkbWriteXKBSemantics()
XkbWriteXKBLayout()
XkbWriteXKBKeymap()
XkbWriteXKBFile()
XkbWriteCFile()
XkbWriteXKMFile()
XkbWriteToServer()
XkbMergeFile()
XkmFindTOCEntry()
XkmReadFileSection()
XkmReadFileSectionName()
InitExtInput()
xf86CheckButton()
xf86SwitchCoreDevice()
RamDacSetGamma()
RamDacRestoreDACValues()
xf86Bpp
xf86ConfigPix24
xf86MouseCflags[]
xf86SupportedMouseTypes[]
xf86NumMouseTypes
xf86ChangeBusIndex()
xf86EntityEnter()
xf86EntityLeave()
xf86WrapperInit()
xf86RingBell()
xf86findOptionBoolean()
xf86debugListOptions()
LoadSubModuleLocal()
LoaderSymbolLocal()
getInt10Rec()
xf86CurrentScreen
xf86ReallocatePciResources()
xf86NewSerialNumber()
xf86RandRSetInitialMode()
fbCompositeSolidMask_nx1xn
fbCompositeSolidMask_nx8888x0565C
fbCompositeSolidMask_nx8888x8888C
fbCompositeSolidMask_nx8x0565
fbCompositeSolidMask_nx8x0888
fbCompositeSolidMask_nx8x8888
fbCompositeSrc_0565x0565
fbCompositeSrc_8888x0565
fbCompositeSrc_8888x0888
fbCompositeSrc_8888x8888
fbCompositeSrcAdd_1000x1000
fbCompositeSrcAdd_8000x8000
fbCompositeSrcAdd_8888x8888
fbGeneration
fbIn
fbOver
fbOver24
fbOverlayGeneration
fbRasterizeEdges
fbRestoreAreas
fbSaveAreas
composeFunctions
VBEBuildVbeModeList()
VBECalcVbeModeIndex()
TIramdac3030CalculateMNPForClock()
shadowBufPtr
shadowFindBuf()
miRRGetScreenInfo()
RRSetScreenConfig()
RRModePruneUnused()
PixmanImageFromPicture()
extern int miPointerGetMotionEvents()
miClipPicture()
miRasterizeTriangle()
fbPush1toN()
fbInitializeBackingStore()
ddxBeforeReset()
SetupSprite()
InitSprite()
DGADeliverEvent()
SPECIAL CASES
o defined as _X_INTERNAL
xf86NewInputDevice()
o defined as static
fbGCPrivateKey
fbOverlayScreenPrivateKey
fbScreenPrivateKey
fbWinPrivateKey
o defined in libXfont.so, but declared in xorg/dixfont.h
GetGlyphs()
QueryGlyphExtents()
QueryTextExtents()
ParseGlyphCachingMode()
InitGlyphCaching()
SetGlyphCachingMode()