Most (but not all) of these were found by using
codespell --builtin clear,rare,usage,informal,code,names
but not everything reported by that was fixed.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
When running with a weston session without a pointer device (thus with
the wl_seat not having a pointer) xwayland pointer warping and pointer
confining should simply be ignored to avoid crashes.
Signed-off-by: Sjoerd Simons <sjoerd@collabora.com>
Xwayland uses the device private to point to the `xwl_seat`.
Device may be removed at any time, including on suspend.
On resume, if the DIX code ends up calling a function that requires the
`xwl_seat` such as `xwl_set_cursor()` we may end up pointing at random
data.
Make sure the clear the device private data on removal so that we don't
try to use it and crash later.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
https://gitlab.freedesktop.org/xorg/xserver/issues/709
xwl_seat_maybe_lock_on_hidden_cursor() checks that the value of
cursor_confinement_window is not NULL, yet there is no code path
that could lead to this.
Remove the test for cursor_confinement_window being set, it's useless.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
When an X11 client issues a ConfinePointer wit ha hidden cursor,
Xwayland may translate that as a pointer lock.
However, if the pointer is located on another window at the time,
the request may be ignored, even if the pointer later enters the window.
To avoid that issue, check again if locking the pointer with a hidden
cursor is needed when pointer enters a surface.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
When an X11 client has an active grab on the pointer, all events are
reported relative to the window with the grab.
For Xwayland, if an X11 client has a grab with a pointer confinement
active, while pointer focus is on another window, motion events should
not be reported to the client with the grab, because that sets the X11
client appart, the events would be reported when the pointer is on any
X11 window but not on Wayland native surfaces.
Therefore, if the pointer is confined on a window and that window
differs from the actual pointer focus window, just pretend we lost
pointer focus to another window.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/962
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
If a client issues a grab on the pointer while the cursor is on another
X11 window, and then hides the cursor, we may end up locking the pointer
onto that other window.
Then a button click might end up moving the focus away from the window
which issued the grab, leaving the whole setup in a mixed up state.
Typically, if the pointer is on another X11 window, we should not try to
lock the pointer, so that it can be moved back to the window which
actually issues the grab (and hence the pointer confinement). Typically,
this is the same as an X11 client issuing a pointer grab while the
cursor is on another Wayland native window.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/962
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Mutter recently added headless tests, and when running those tests the
Wayland compositor runs for a very short time.
Xwayland is spawned by the Wayland compositor and upon startup will
query the various Wayland protocol supported by the compositor.
To do so, it will do a roundtrip to the Wayland server waiting for
events it expects.
If the Wayland compositor terminates before Xwayland has got the replies
it expects, it will loop indefinitely calling `wl_display_roundtrip()`
continuously.
To avoid that issue, add a new `xwl_screen_roundtrip()` that checks for
the returned value from `wl_display_roundtrip()` and fails if it is
negative.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Roman Gilg <subdiff@gmail.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Now that each source and header should be in order, we can safely cleaup
the last remaining bits from the main `xwayland.h` which is not needed
anymore and can be removed.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Move Xwayland screen related code to a separate source file and header.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Move the Xwayland cursor declarations to their own header file.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Move the Xwayland input declarations to their own header file.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Over time, Xwayland main source file `xwayland.c` has grown in size
which makes it look cluttered and harder to read.
Move the code dealing with Xwayland window to its own source and header
files.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Add support for per client randr-resolution change emulation using viewport,
for apps which want to change the resolution when going fullscreen.
Partly based on earlier work on this by Robert Mader <robert.mader@posteo.de>
Note SDL2 and SFML do not restore randr resolution when going from
fullscreen -> windowed, I believe this is caused by us still reporting the
desktop resolution when they query the resolution. This is not a problem
because when windowed the toplevel window size includes the window-decorations
so it never matches the emulated resolution.
One exception would be the window being resizable in Windowed mode and the
user resizing the window so that including decorations it matches the
emulated resolution *and* the window being at pos 0x0. But this is an
extreme corner case. Still I will submit patches upstream to SDL2
and SFML to always restore the desktop resolution under Xwayland,
disabling resolution emulation all together when going windowed.
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
On pointer enter notification, Xwayland checks for an existing pointer
warp with a `NULL` sprite.
In turn, `xwl_pointer_warp_emulator_maybe_lock()` checks for an existing
grab and the destination window using `XYToWindow()` which does not
check for the actual sprite not being `NULL`.
So, in some cases, when the pointer enters the surface and there is an
existing X11 grab which is not an ownerEvents grab, Xwayland would crash
trying to dereference the `NULL` sprite pointer:
#0 __GI_raise ()
#1 __GI_abort () at abort.c:79
#2 OsAbort () at utils.c:1351
#3 AbortServer () at log.c:879
#4 FatalError () at log.c:1017
#5 OsSigHandler () at osinit.c:156
#6 OsSigHandler () at osinit.c:110
#7 <signal handler called>
#8 XYToWindow (pSprite=0x0, x=0, y=0) at events.c:2880
#9 xwl_pointer_warp_emulator_maybe_lock () at xwayland-input.c:2673
#10 pointer_handle_enter () at xwayland-input.c:434
Avoid the crash by simply checking for the sprite being not `NULL` in
`xwl_pointer_warp_emulator_maybe_lock()`
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Bugzilla: https://bugzilla.redhat.com/1708119
This hasn't done anything besides return TRUE in a long long time.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This prevents multiple scroll events happening for wayland compositors
which send axis values other than 10. For example, libinput will
typically return 15 for each scroll wheel step, and if a wayland
compositor sends those to xwayland without normalising them, 2 scroll
wheel steps will end up as 3 xorg scroll events. By listening for the
discrete_axis event, this will now correctly send only 2 xorg scroll
events.
The wayland protocol gurantees that there will always be an axis event
following an axis_discrete event. However, it does not gurantee that
other events (including other axis_discrete+axis pairs) will not happen
in between them. So we must keep a list of outstanding axis_discrete
events.
Signed-off-by: Scott Anderson <scott@anderso.nz>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Changes the device name from "xwayland-stylus" to "xwayland-tablet stylus".
This doesn't fully address #26 but it goes a little step into making it more
human-readable.
https://gitlab.freedesktop.org/wayland/wayland/issues/26
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
xwl_unrealize_window() would use freed xwl_window which can lead to
various memory corruption and crashes, as reported by valgrind:
Invalid read of size 8
at 0x42C802: xwl_present_cleanup (xwayland-present.c:84)
by 0x42BA67: xwl_unrealize_window (xwayland.c:601)
by 0x541EE9: compUnrealizeWindow (compwindow.c:285)
by 0x57E1FA: UnrealizeTree (window.c:2816)
by 0x581189: UnmapWindow (window.c:2874)
by 0x54EB26: ProcUnmapWindow (dispatch.c:879)
by 0x554B7D: Dispatch (dispatch.c:479)
by 0x558BE5: dix_main (main.c:276)
by 0x7C4B1BA: (below main) (libc-start.c:308)
Address 0xf520f60 is 96 bytes inside a block of size 184 free'd
at 0x4C2EDAC: free (vg_replace_malloc.c:530)
by 0x42B9FB: xwl_unrealize_window (xwayland.c:624)
by 0x541EE9: compUnrealizeWindow (compwindow.c:285)
by 0x57E1FA: UnrealizeTree (window.c:2816)
by 0x581189: UnmapWindow (window.c:2874)
by 0x54EB26: ProcUnmapWindow (dispatch.c:879)
by 0x554B7D: Dispatch (dispatch.c:479)
by 0x558BE5: dix_main (main.c:276)
by 0x7C4B1BA: (below main) (libc-start.c:308)
Block was alloc'd at
at 0x4C2FB06: calloc (vg_replace_malloc.c:711)
by 0x42B307: xwl_realize_window (xwayland.c:488)
by 0x541E59: compRealizeWindow (compwindow.c:268)
by 0x57DA40: RealizeTree (window.c:2617)
by 0x580B28: MapWindow (window.c:2694)
by 0x54EA2A: ProcMapWindow (dispatch.c:845)
by 0x554B7D: Dispatch (dispatch.c:479)
by 0x558BE5: dix_main (main.c:276)
by 0x7C4B1BA: (below main) (libc-start.c:308)
This is because UnrealizeTree() traverses the tree from top to bottom,
which invalidates the assumption that if the Window doesn't feature an
xwl_window on its own, it's the xwl_window of its first ancestor with
one.
This reverts commit 82df2ce3
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
BTN_STYLUS3 has been introduced by the Linux 4.15 kernel to report the
status of the third button present on Wacom's new "Pro Pen 3D" stylus.
Treat this button like xf86-input-wacom and send a button 8 event
("navigate back") when received from Wayland.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
When the Wayland compositor notifies of a new keymap, for the first X11
client using the keyboard, the last slave keyboard used might still not
be set (i.e. “lastSlave” is still NULL).
As a result, the new keymap is not applied, and the first X11 window
will have the wrong keymap set initially.
Apply the new keymap to the master keyboard as long as there's one.
Bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=791383
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The tablet/stylus interfaces reused xwl_seat->focus_window, which
would leave a somewhat inconsistent state of that variable for
wl_pointer purposes (basically, everything) if the pointer happened
to lay on the same surface than the stylus while proximity_out
happens.
We just want the stylus xwl_window to correctly determine we have
stylus focus, and to correctly translate surface-local coordinates
to root coordinates, this can be done using a different variable.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Acked-by: Jason Gerecke <jason.gerecke@wacom.com>
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Calling xwl_window_from_window means looping through the window ancestor
chain whenever it is called on a child window or on an automatically
redirected window.
Since these properties and the potential ancestor's xwl_window are constant
between window realization and unrealization, we can omit the looping by
always putting the respective xwl_window in the Window's private field on
its realization. If the Window doesn't feature an xwl_window on its own,
it's the xwl_window of its first ancestor with one.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Xwayland would crash in some circumstances while trying to issue a
pointer locking when the cursor is hidden when there is no seat focus
window set.
The crash signature looks like:
#0 zwp_pointer_constraints_v1_lock_pointer ()
#1 xwl_pointer_warp_emulator_lock () at xwayland-input.c:2584
#2 xwl_seat_maybe_lock_on_hidden_cursor () at xwayland-input.c:2756
#3 xwl_seat_maybe_lock_on_hidden_cursor () at xwayland-input.c:2765
#4 xwl_seat_cursor_visibility_changed () at xwayland-input.c:2768
#5 xwl_set_cursor () at xwayland-cursor.c:245
#6 miPointerUpdateSprite () at mipointer.c:468
#7 miPointerDisplayCursor () at mipointer.c:206
#8 CursorDisplayCursor () at cursor.c:150
#9 AnimCurDisplayCursor () at animcur.c:220
#10 ChangeToCursor () at events.c:936
#11 ActivatePointerGrab () at events.c:1542
#12 GrabDevice () at events.c:5120
#13 ProcGrabPointer () at events.c:4908
#14 Dispatch () at dispatch.c:478
#15 dix_main () at main.c:276
xwl_pointer_warp_emulator_lock() tries to use the surface from the
xwl_seat->focus_window leading to a NULL pointer dereference when that
value is NULL.
Check that xwl_seat->focus_window is not NULL earlier in the stack in
xwl_seat_maybe_lock_on_hidden_cursor() and return early if not the case
to avoid the crash.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=102474
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If the compositor has no support for the Xwayland keyboard grab
protocol, there is no need to set-up our keyboard grab handler.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The keyboard grabbing protocol for Xwayland is included in
wayland-protocol 1.9.
Update the wayland-protocol required version in both configure and meson
builds and add support for this new protocol in Xwayland.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The 'tablet_tool_wheel' function for tablet scrolling was added back in
8a1defcc63 but left unimplemented. This commit fills in the necessary
details, using the "clicks" count as the number of discrete scroll up/down
events to send.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The 'tablet_tool_frame' function treats the button masks as though they
are zero-indexed, but 'tablet_tool_button_state' treats them as one-
indexed. The result is that an e.g. middle click event recieved from
Wayland will be sent from the X server as a right-click instead.
Fixes: 773b04748d ("xwayland: handle button events after motion events")
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
In the typical pattern in games of "hide cursor, grab with a confineTo,
warp constantly the pointer to the middle of the window" the last warping
step is actually rather optional. Some games may choose to just set up a
grab with confineTo argument, and trust that they'll get correct relative
X/Y axis values despite the hidden cursor hitting the confinement window
edge.
To cater for these cases, lock the pointer whenever there is a pointer
confinement and the cursor is hidden. This ensures the pointer position
is in sync with the compositor's when it's next shown again, and more
importantly resorts to the relative pointer for event delivery.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
In the event that xwayland gets launched on a wayland compositor that
doesn't yet have support for wp_tablet_manager, we end up skipping the
initialization of the lists. This is wrong, because regardless of
whether or not a tablet is present we still attempt to traverse these
lists later in xwl_set_cursor(), expecting that if the lists are empty
from no tablet manager that we simply won't execute any loop iterations.
(EE)
(EE) Backtrace:
(EE) 0: Xwayland (OsSigHandler+0x3b) [0x4982f9]
(EE) 1: /lib64/libpthread.so.0 (__restore_rt+0x0) [0x7f73722545bf]
(EE) 2: Xwayland (xwl_set_cursor+0x9f) [0x429974]
(EE) 3: Xwayland (miPointerUpdateSprite+0x261) [0x4fe1ca]
(EE) 4: Xwayland (mieqProcessInputEvents+0x239) [0x4f8d33]
(EE) 5: Xwayland (ProcessInputEvents+0x9) [0x4282f0]
(EE) 6: Xwayland (Dispatch+0x42) [0x43e2d4]
(EE) 7: Xwayland (dix_main+0x5c9) [0x44c6dc]
(EE) 8: Xwayland (main+0x28) [0x61c523]
(EE) 9: /lib64/libc.so.6 (__libc_start_main+0xf1) [0x7f7371e9d401]
(EE) 10: Xwayland (_start+0x2a) [0x4208fa]
(EE) 11: ? (?+0x2a) [0x2a]
(EE)
(EE) Segmentation fault at address 0x28
(EE)
Fatal server error:
(EE) Caught signal 11 (Segmentation fault). Server aborting
(EE)
Reproduced when trying to run upstream xwayland under fedora 25's weston
package.
Signed-off-by: Lyude <lyude@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Hooked up a bit differently to the other tools. Those tools can be static for
all and be re-used. The wacom driver initializes the pad with the correct
number of buttons though and we can't do this until we have the pad done event.
If the tablet is removed and we plug a different one in, we should initialize
that correctly, so unlike the other tools the pad is properly removed and
re-initialized on plug.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Ping Cheng <ping.cheng@wacom.com>
Each xwl_tablet_tool gets a xwl_cursor, as on wayland each of those
will get an independent cursor that can be set through
zwp_tablet_tool.set_cursor.
However, all tools (and the pointer) share conceptually the same VCP
on Xwayland, so have cursor changes trigger a xwl_cursor update on
every tool (and the pointer, again). Maybe Xwayland could keep track
of the most recent device and only update that cursor to get better
visual results, but this is simpler, and it's going to be odd
anyway...
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Ping Cheng <ping.cheng@wacom.com>
This struct takes away the cursor info in xwl_seat, and has
an update function so we can share the frame handling code
across several xwl_cursors.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Ping Cheng <ping.cheng@wacom.com>
Make sure the button events are sent after the motion events into the new
position.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Ping Cheng <ping.cheng@wacom.com>
Translates Wayland tablet events into corresponding X11 tablet events. As
with the prior commit, these events are modeled after those created by the
xf86-input-wacom driver to maximize compatibility with existing applications.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Ping Cheng <ping.cheng@wacom.com>
Creates and maintains the canonical trio of X devices (stylus, eraser,
and cursor) to be shared by all connected tablets. A per-tablet trio
could be created instead, but there are very few benefits to such a
configuration since all tablets still ultimately share control of a
single master pointer.
The three X devices are modeled after those created by xf86-input-wacom
but use a generic maximum X and Y that should be large enough to
accurately represent values from even the largest currently-available
tablets.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Ping Cheng <ping.cheng@wacom.com>
The wp_tablet_seat interface provides us with notifications as tablets,
tools, and pads are connected to the system. Add listener functions and
store references to the obtained devices.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Ping Cheng <ping.cheng@wacom.com>
If we're notified about the existence of the wp_tablet_manager interface,
we bind to it so that we can make use of any tablets that are (or later
become) available. For each seat that exists or comes into existance at
a later point, obtain the associated tablet_seat.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Ping Cheng <ping.cheng@wacom.com>
keyboard_check_repeat() fetches the XWayland seat from the
dev->public.devicePrivate do do its thing.
If a key event is sent programmatically through Xtest, our device is the
virtual core keyboard and that has a dev->public.devicePrivate of NULL,
leading to a segfault in keyboard_check_repeat().
This is the case with "antimicro" which sends key events based on the
joystick buttons.
Don't set the checkRepeat handler on the VCK since it cannot possibly work
anyway and it has no effect on the actual checkRepeat intended functionality.
Bugzilla: https://bugzilla.redhat.com/1416244
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
During the InitInput() phase, the wayland events get dequeued so we
can possibly end up calling dispatch_pointer_motion_event().
If this occurs before xwl_seat->focus_window is set, it leads to a NULL
pointer derefence and a segfault.
Check for xwl_seat->focus_window in both pointer_handle_frame() and
relative_pointer_handle_relative_motion() prior to calling
dispatch_pointer_motion_event() like it's done in
pointer_handle_motion().
Bugzilla: https://bugzilla.redhat.com/1410804
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Sometimes, Xwayland will try to use a cursor that has just been freed,
leading to a crash when trying to access that cursor data either in
miPointerUpdateSprite() or AnimCurTimerNotify().
CheckMotion() updates the pointer's cursor based on which xwindow
XYToWindow() returns, and Xwayland implements its own xwl_xy_to_window()
to fake a crossing to the root window when the pointer has left the
Wayland surface but is still within the xwindow.
But after an xwindow is unrealized, the last xwindow used to match the
xwindows is cleared so two consecutive calls to xwl_xy_to_window() may
not return the same xwindow.
To avoid this issue, update the last_xwindow based on enter and leave
notifications instead of xwl_xy_to_window(), and check if the xwindow
found by the regular miXYToWindow() is a child of the known last
xwindow, so that multiple consecutive calls to xwl_xy_to_window()
return the same xwindow, being either the one found by miXYToWindow()
or the root window.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1385258
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Tested-by: Vít Ondruch <vondruch@redhat.com>
Tested-by: Satish Balay <balay@fastmail.fm>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Commits 816015648f and
fee0827a9a made it so that
wl_keyboard::enter doesn't result in X clients getting KeyPress events
while still updating our internal xkb state to be in sync with the
host compositor.
wl_keyboard::leave needs to be handled in the same way as its
semantics from an X client POV should be the same as an X grab getting
triggered, i.e. X clients shouldn't get KeyRelease events for keys
that are still down at that point.
This patch uses LeaveNotify for these events on wl_keyboard::leave and
changes the current use of KeymapNotify to EnterNotify instead just to
keep some symmetry between both cases.
On ProcessDeviceEvent() we still need to deactivate X grabs if needed
for KeyReleases.
Signed-off-by: Rui Matos <tiagomatos@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The definition by the manual is:
calloc(size_t nmemb, size_t size)
Swap the arguments of calloc() calls to be the right way around.
Presumably this makes no functional difference, but better follow the
spec.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Not needed anymore now that mipointer exposes an API for that,
miPointerInvalidateSprite()
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
On some random condition, a touch event may trigger a crash in Xwayland
in GetTouchEvents().
The (simplified) backtrace goes as follow:
(gdb) bt
#0 GetTouchEvents() at getevents.c:1892
#1 QueueTouchEvents() at getevents.c:1866
#2 xwl_touch_send_event() at xwayland-input.c:652
#5 wl_closure_invoke() from libwayland-client.so.0
#6 dispatch_event() from libwayland-client.so.0
#7 wl_display_dispatch_queue_pending() from libwayland-client.so.0
#8 xwl_read_events() at xwayland.c:483
#9 ospoll_wait() at ospoll.c:412
#10 WaitForSomething() at WaitFor.c:222
#11 Dispatch() at dispatch.c:412
#12 dix_main() at main.c:287
#13 __libc_start_main() at libc-start.c:289
#14 _start ()
The crash occurs when trying to access the sprite associated with the
touch device, which appears to be NULL. Reason being the device itself
is more a keyboard device than a touch device.
Moreover, it appears the device is neither enabled nor activated
(inited=0, enabled=0) which doesn't seem right, but matches the code in
init_touch() from xwayland-input.c which would enable the device if it
was previously existing and otherwise would create the device but not
activate it.
Make sure we do activate and enable touch devices just like we do for
other input devices such as keyboard and pointer.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Pointer enter event coordinates are surface relative and we need them to
be screen relative for pScreen->SetCursorPosition().
https://bugzilla.gnome.org/show_bug.cgi?id=758283
Signed-off-by: Rui Matos <tiagomatos@gmail.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Emulate pointer warps by locking the pointer and sending relative
motion events instead of absolute. X will keep track of the "fake"
pointer cursor position given the relative motion events, and the
client warping the cursor will warp the faked cursor position.
Various requirements need to be met for the pointer warp emulator to
enable:
The cursor must be invisible: since it would not be acceptable that a
fake cursor position would be different from the visual representation
of the cursor, emulation can only be done when there is no visual
representation done by the Wayland compositor. Thus, for the emulator
to enable, the cursor must be hidden, and would the cursor be displayed
while the emulator is active, the emulator would be destroyed.
The window that is warped within must be likely to have pointer focus.
For example, warping outside of the window region will be ignored.
The pointer warp emulator will disable itself once the fake cursor
position leaves the window region, or the cursor is made visible.
This makes various games depending on pointer warping (such as 3D
first-person shooters and stategy games using click-to-drag-map like
things) work.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>