This is the only place where we don't check whether
primaryBus.id.plat->pdev is not NULL before accessing its members.
It may be NULL in cases we fail to parse the busid in
config_udev_odev_setup_attribs() (see also [1], [2]) such as when udev
does not give use ID_PATH. This in turn leads to
platform_find_pci_info() being not called and pdev being NULL in one of
the items within the xf86_platform_devices array. For this to cause a
crash we only need it to become the primaryBus device.
[1]: https://gitlab.freedesktop.org/xorg/xserver/-/issues/993
[2]: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1076
Signed-off-by: Povilas Kanapickas <povilas@radix.lt>
screenp->displays[count] (passed to configDisplay() in
configScreen()) is NULL if there is no Virtual setting
in the configuration.
Fixes: f8a6be04d0 ("xfree86: Change
displays array to pointers array to fix invalid pointer issues
after table reallocation")
Signed-off-by: Zoltán Böszörményi <zboszor@gmail.com>
The fix from commit c468d34c7 - "glx: Set ContextTag for all contexts"
is actually incomplete, it correctly sets the context tag for direct
contexts as well, but would fail to mark the context's currentClient.
As a result, when the context is destroyed, it would be freed
immediately rather than being just scheduled for deletion, even though
it is still current for some client. leading to a use-after-free.
Make sure to also set the context's currentClient for direct contexts as
well, not just indirect ones.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Fixes: c468d34c7 - "glx: Set ContextTag for all contexts"
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1186
Reviewed-by: Adam Jackson <ajax@redhat.com>
Physical dimmension of display can be obtained not just by configuration or
DDC, but also directly from kernel via drmModeGetConnector(). Until now
xserver silently discarded these values even when no configuration nor EDID
were present and fallbacked to default DPI.
There are rare cases when xf86SetDepthBpp is resizing displays array in confScreen.
As that array is shared between set of ScrnInfoRec's then realloc might invalidate chached DispPtr display values in
otheres ScrnInfoRec objects.
If we will change displays array as an array of pointers to DispRec then cached DispRec pointers in ScrnInfoRec
won't be invalid after reallocation of displays array.
Signed-off-by: Łukasz Spintzyk <lukasz.spintzyk@synaptics.com>
In certain circumstances we will have a lot of flip errors without a
reasonable way to prevent them. In such case we reduce the number of
logged messages to at least not fill the error logs.
The details are as follows:
At least on i915 hardware support for async page flip support depends on
the used modifiers which themselves can change dynamically for a screen.
This results in the following problems:
- We can't know about whether a particular CRTC will be able to do an
async flip without hardcoding the same logic as the kernel as there's no
interface to query this information.
- There is no way to give this information to an application, because
the protocol of the present extension does not specify anything about
changing of the capabilities on runtime or the need to re-query them.
Even if the above was solved, the only benefit would be avoiding a
roundtrip to the kernel and reduced amount of error logs. The former
does not seem to be a good enough benefit compared to the amount of work
that would need to be done. The latter is solved in this commit.
Reviewed-by: Eero Tamminen <eero.t.tamminen@intel.com>
Signed-off-by: Povilas Kanapickas <povilas@radix.lt>
Like in 0e3f1252da ("glamor: Avoid using GL_QUADS on VC4")
this will avoid mesa to fallback doing conversion for QUADS primitives.
Signed-off-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
In xwl_glamor_eglstream_get_wl_buffer_for_pixmap. This can likely be hit
now with an SHM pixmap via the Present flip path. There might be other
corner cases.
Fixes: f3eb1684fa "xwayland: enable MIT-SHM shared pixmaps"
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
This mode for displays running on evdi/udl as side effect of failed glamor_egl_init
reverse_prime_offload_mode was initialized to FALSE
After Mesa upgrade to 21.0.0 GL_RENDERER is not llvmpipe that results in successful glamor_egl_init
and reverse_prime_offload_mode enabled.
This commit is explicitly disabling reverse_prime_offload_mode for evdi and udl drivers
Signed-off-by: Łukasz Spintzyk <lukasz.spintzyk@synaptics.com>
Currently, xorgGlxMakeCurrent() would set the context tag only for
indirect GLX contexts.
However, several other places expect to find a context for the tag or
they would raise a GLXBadContextTag error, such as WaitGL() or WaitX().
Set the context tag for direct contexts as well, to avoid raising an
error and possibly killing the client.
Thanks to Erik Kurzinger <ekurzinger@nvidia.com> for spotting the issue.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
When the command line option "-terminate" is used, it could be
interesting to give it an optional grace period to let the Xserver
running for a little longer in case a new connection occurs.
This adds an optional parameter to the "-terminate" command line option
for this purpose.
v2: Use a delay in seconds instead of milliseconds
(Martin Peres <martin.peres@mupuf.org>)
v3: Clarify man page entry, ensure terminateDelay is always >= 0,
simplify TimerFree(). (Peter Hutterer <peter.hutterer@who-t.net>)
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
With Wayland compositors now being able to start Xwayland on demand, the
next logical step is to be able to stop Xwayland when there is no more
need for it.
The Xserver itself is capable of terminating itself once all X11 clients
are gone, yet in a typical full session, there are a number of X11
clients running continuously (e.g. the Xsettings daemon, IBus, etc.).
Those always-running clients will prevent the Xserver from terminating,
because the actual number of X11 clients will never drop to 0. Worse,
the X11 window manager of a Wayland compositor also counts as an X11
client, hence also preventing Xwayland from stopping.
Some compositors such as mutter use the XRes extension to query the X11
clients connected, match their PID with the actual executable name and
compare those with a list of executables that can be ignored when
deciding to kill the Xserver.
But that's not just clumsy, it is also racy, because a new X11 client
might initiate a connection the X11 server right when the compositor is
about to kill it.
To solve this issue directly at the Xserver level, this add new entries
to the XFixes extension to let the X11 clients themselves specify the
disconnect mode they expect.
Typically, those X11 daemon clients would specify the disconnect mode
XFixesClientDisconnectFlagTerminate to let the Xserver know that they
should not be accounted for when checking the remaining clients prior
to terminate.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
If a GLXMakeCurrent request specifies an X window as its drawable,
__glXGetDrawable will implicitly create a GLXWindow for it. However,
the client may have already explicitly created a GLXWindow for that X
window. If that happens, two __glXDrawableRes resources will be added
to the window.
If the explicitly-created GLXWindow is later destroyed by the client,
DrawableGone will call FreeResourceByType on the X window, but this
will actually free the resource for the implicitly-created GLXWindow,
since that one would be at the head of the list.
Then if the X window is destroyed after that, the resource for the
explicitly-created GLXWindow will be freed. But that GLXWindow was
already destroyed above. This crashes the server when it tries to call
the destroyed GLXWindow's destructor. It also means the
implicitly-created GLXWindow would have been leaked since the
FreeResourceByType call mentioned above skips calling the destructor.
To fix this, if __glXGetDrawable is given an X window, it should check
if there is already a GLXWindow associated with it, and only create an
implicit one if there is not.
Signed-off-by: Erik Kurzinger <ekurzinger@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Meson has a built-in facility to use bundled versions of dependencies
if system packages are too old. Enable for xorgproto after 8e504d8b36:
Run-time dependency xproto found: YES 7.0.33
Run-time dependency randrproto found: YES 1.6.0
Run-time dependency renderproto found: YES 0.11.1
Run-time dependency xextproto found: YES 7.3.0
Dependency inputproto found: NO found 2.3.2 but need: '>= 2.3.99.1'
Found CMake: /usr/local/bin/cmake (3.20.2)
Run-time dependency inputproto found: NO (tried pkgconfig and cmake)
Looking for a fallback subproject for the dependency inputproto
meson.build:73:0: ERROR: Neither a subproject directory nor a xorgproto.wrap file was found.
That will dramatically affect performance, might as well log when we
cannot use GL_OES_EGL_image with the NVIDIA closed-source driver.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
If the EGLStream backend is able to use hardware acceleration with the
NVIDIA closed source driver, we should use the "nvidia" GLX
implementation instead of the one from Mesa to take advantage of the
NVIDIA hardware accelerated rendering.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
If Xwayland's EGLstream backend supports hardware acceleration with the
NVIDIA closed-source driver, the GLX library also needs to be one
shipped by NVIDIA, that's what GLVND is for.
Add a new member to the xwl_screen that the backend can optionally set
to the preferred GLVND vendor to use.
If not set, "mesa" is assumed.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
libxcb 14.1 and older are not forwards-compatible with new device
classes as it does not properly ignore unknown device classes. Since
breaking libxcb would break quite a lot of applications, we instead
report Gesture device class only if the client advertised support for XI
2.4.
Clients may still not work in cases when a client advertises XI 2.4
support and then a completely separate module within the client uses
broken libxcb to call XIQueryDevice.
Signed-off-by: Povilas Kanapickas <povilas@radix.lt>
When eglSwapBuffers inserts a new frame into a window's stream, there may be a
delay before the state of the consumer end of the stream is updated to reflect
this. If the subsequent wl_surface_attach, wl_surface_damage, wl_surface_commit
calls are received by the compositor before then, it will (typically) re-use
the previous frame acquired from the stream instead of the latest one.
This can leave the window displaying out-of-date contents, which might never be
updated thereafter.
To fix this, after calling eglSwapBuffers, xwl_glamor_eglstream_post_damage
should call eglStreamFlushNV. This call will block until it can be guaranteed
that the state of the consumer end of the stream has been updated to reflect
that a new frame is available.
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1171
Signed-off-by: Erik Kurzinger <ekurzinger@nvidia.com>
Allow X11 clients to create shared pixmaps via the MIT-SHM
extension under Xwayland. Tested with a wlroots patch [1].
Also add a few assertions to make sure we have wl_buffers where we
need them.
[1]: https://github.com/swaywm/wlroots/pull/2875
Signed-off-by: Simon Ser <contact@emersion.fr>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
As of commit 098e0f52 xwl_glamor_eglstream_allow_commits will not allow commits
if the xwl_pixmap does not have an EGLSurface. This is valid for pixmaps backed
by an EGLStream, however pixmaps backed by a dma-buf for OpenGL or Vulkan
rendering will never have an EGLSurface. Unlike EGLStream backed pixmaps,
though, glamor will render directly to the buffer that Xwayland passes to the
compositor. Hence, they don't require the intermediate copy in
xwl_glamor_eglstream_post_damage that EGLStream backed pixmaps do, so there is
no need for an EGLSurface.
Signed-off-by: Erik Kurzinger <ekurzinger@nvidia.com>
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
The EGLstream backend's post damage function uses a shader and
glDrawArrays() to copy the data from the glamor's pixmap texture prior
to do the eglSwapBuffers().
However, glDrawArrays() can be affected by the GL state, and therefore
not reliably produce the expected copy, causing the content of the
buffer to be corrupted.
Make sure to set the ALU to GXCopy prior to call glDrawArrays() to get
the expected result.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Suggested-by: Michel Dänzer <mdaenzer@redhat.com>