When setting crtc->gamma_size to randr_crtc->gammaSize we should
use randr_crtc->gammaSize to allocate new gamma table in crtc.
Currently, if randr_crtc->gammaSize > crtc->gammaSize the subsequent
memcpy will overwrite memory beyond the end of gamma table.
Signed-off-by: Dominik Behr <dbehr@chromium.org>
Reviewed-by: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Mark mips64 as 64bit
Use long as PORT_SIZE
Signed-off-by: YunQiang Su <wzssyqa@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Ok, that's embarassing -- I didn't even make sure Adam's patch
compiled. These are minimal fixes to make it build.
Signed-off-by: Keith Packard <keithp@keithp.com>
Somewhat shocking how much simpler this is, isn't it? We no longer need
to wrap the screen or GC or Picture, because damage does it for us,
which is doubly great since the old shadowfb code didn't wrap _enough_
things (border updates and Render glyphs, at least). The only real
difference now between this and shadow is a) shadow will let you track
arbitrary pixmaps, and b) shadow's update hook runs off the BlockHandler
whereas shadowfb is immediate.
Tested on nouveau.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Fixes Piglit test "swapbuffersmsc-return swap_interval 0".
Ensure that *swap_target gets initialized on any 'return Success' path,
even if the swap request can't be completed by the driver and the server
falls back to a simple blit. That path can also be triggered by setting
swap_interval to 0, which disables sync to vertical retrace.
We originally found this bug because for some reason SDL2 automatically
sets swap_interval to 0, when we were trying to test OML_sync_control in
an SDL2 test application. We then discovered that the above-mentioned
Piglit test has been failing for the same reason since it was
introduced.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Theo Hill <Theo0x48@gmail.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
swap_target is an out-parameter that needs to be set to the value that
SBC will take on after this SwapBuffers request completes.
However, it was also being used as a temporary variable to hold the MSC
at which the SwapBuffers request got scheduled to occur. This confusion
makes it harder to reason about whether swap_target is being set
correctly for its out-parameter usage. (Hint: It isn't.)
For the latter use, it makes more sense to use the existing target_msc
variable, which already has the right value unless target_msc, divisor,
and remainder are all 0, in which case we can set it using swap_interval
as usual.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Theo Hill <Theo0x48@gmail.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
This was added for DRM_IOCTL_SET_VERSION support, which has been around
for over ten years now. Since we require ≥2.3.0 in configure.ac this
would really only protect you if you managed to build against a modern
libdrm but run against one that's more than 7½ years old, which, doctor
it hurts when I do this.
Archaeology: http://cgit.freedesktop.org/~ajax/dri/commit/xc/programs/Xserver/GL/dri/dri.c?id=77d62efca033dced96ab7998b7c62a4e2df907d5
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Handle the unported case by issuing a build-time and run-time warning.
And add support for FreeBSD kernel based systems, by using the
VT_GETINDEX ioctl to check if the file descriptor is on a virtual
console.
Signed-off-by: Guillem Jover <guillem@hadrons.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Not printing the program name produces very confusing messages that
might be difficult to attribute while trying to diagnose problems,
let's be explicit about who we are.
Also add a missing "/" between SUID_WRAPPER_DIR and "Xorg.bin".
Signed-off-by: Guillem Jover <guillem@hadrons.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The libdrm.pc file gives us the correct include path, do not try to
hardcode it on the source, as it might vary on the installed system,
for example on Debian-based systems it's under /user/include/libdrm/.
Signed-off-by: Guillem Jover <guillem@hadrons.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
load_cursor_argb() may need to be able to fail and have the server fall back
to a software cursor in at least the following circumstances.
1) The hardware can only support some ARGB cursors and this does not just
depend on cursor size.
2) Virtual hardware may not wish to pass through a cursor to the host at a
particular time but may wish to accept the same cursor at another time.
This patch adds a return value to the API and makes the server do the
software fall-back on failure.
Signed-off-by: Michael Thayer <michael.thayer@oracle.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
An X11 client may need to know whether the X server virtual terminal is
currently the active one. This change adds a root window property which
provides that information. Intended interface user: the VirtualBox Guest
Additions.
Signed-off-by: Michael Thayer <michael.thayer@oracle.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
When no logfile was specified (xf86LogFileFrom == X_DEFAULT) and we're not
running as root log to $XDG_DATA_HOME/xorg/Xorg.#.log as Xorg won't be able to
log to the default /var/log/... when it is not running as root.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Rather then a full path prefix, this is a preparation patch for adding
support for logging to another location when not running as root.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Include os.h for ErrorF() to fix implicit-function-declaration warnings when
configured with --enable-debug.
hw/xfree86/parser/DRI.c: In function 'xf86parseDRISection':
hw/xfree86/parser/DRI.c:87:5: error: implicit declaration of function 'ErrorF' [-Werror=implicit-function-declaration]
hw/xfree86/parser/Extensions.c: In function 'xf86parseExtensionsSection':
hw/xfree86/parser/Extensions.c:77:5: error: implicit declaration of function 'ErrorF' [-Werror=implicit-function-declaration]
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Build fbcmap_mi.c once, rather than once for each DDX, and make it part of libfb
or libwfb convenience library.
Since 84e8de1271 we don't have fbcmap.c
This is a sort of revert of 17d85387d1
v2: Remove libkdrivestubs.la from configure.ac
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
When we're using server managed-fds through systemd-logind, systemd-logind
*must* keep running while we are using it, as it does things like drmSetMaster
and drmDropMaster for us on vt-switch.
On a systemd-logind restart, we cannot simply re-connect since we will then
get a different fd for the /dev/dri/card# node, and we've tied a lot of
state to the old fd. I've discussed this with the systemd people, and in the
future there may be a restart mechanism were systemd-logind passed fds from
the old logind to the new logind. But for now there answer is simply:
"Don't restart systemd-logind", and there never really is a good reason to
restart it.
So to ensure unpleasentness if people do decide to restart systemd-logind
anyways (or when it crashes), monitor logind going away and make this a fatal
error. This avoids getting a hard-hung machine on the next vt-switch and will
hopefully quickly educate users to not restart systemd-logind while they have
an X session using it active.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
All files specified in AC_CONFIG_FILES get distributed automatically.
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Looping around LoadExtension() meant that ExtensionModuleList was reallocated
on every extension. Using LoadExtensionList() we pass an array thus the
function can do the reallocation in one go, and then loop and setup the
ExtensionModuleList.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
v2: Update ephyr [Keith Packard]
v3: Eliminate const warnings in LoadExtensionList [Keith Packard]
Signed-off-by: Keith Packard <keithp@keithp.com>
Without these, after commit fdb4ec86c2, it fails to build on Solaris,
with errors of:
xf86Xinput.c: In function 'xf86stat':
xf86Xinput.c:816:5: error: implicit declaration of function 'major' [-Werror=implicit-function-declaration]
xf86Xinput.c:817:5: error: implicit declaration of function 'minor' [-Werror=implicit-function-declaration]
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
So that the fd in use test in systemd_logind_release_fd works properly.
Note we cannot change the test inside systemd_logind_release_fd as it must
work for devices which were never added to the xf86InputDevs too.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
InputDevices may share a single device-node, this happens ie with Wacom
tablets.
This patch makes take_fd and release_fd properly deal with this, together
with the earlier patch for updating the fd in all matching xf86InputDevs
on pause / resume this completes support for such shared device-nodes.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
And use it where appropriate.
Setting the fd for all matching InputDevices is necessary when we've
multiple InputDevices sharing a single device-node, such as happens with
Wacom tablets.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This is a preparation patch for adding support for server managed fds
for InputDevices where multiple input devices share the same device node (and
thus also their major and minor).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Modify systemd_logind_find_info_ptr_by_devnum to take a start argument, so
that it can be used to find all occurences of a devnum in an InputInfo list,
rather then just the first.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Note that there are more callers but those were already not doing any
error checking.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
config_odev* functions are called in code-paths were we already use
XNF* functions in other places, so which are not oom safe already.
Besides that oom is something which should simply never happen, so aborting
when it does is as good a response as any other.
While switching to XNF functions also fixup an unchecked strdup case.
Note the function prototypes are kept unchanged, as they are part of the
server ABI.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
With the recent systemd-logind changes it is possible to install the Xorg
binary without suid root rights and still have everything working as it
should *if* the user only has cards which are supported by kms.
This commit adds a little suid root wrapper, which is a bit weird, first we
strip the suid-root bit of the Xorg binary, and then we add a wrapper ?
The function of this wrapper is to see if a system still needs root-rights,
if it does not (it supports kms and the kms drivers are properly loaded),
then it will immediately drop all elevated rights before executing the real
Xorg binary. If it finds (some) cards which don't support kms, or no cards
at all, then it will execute the Xorg server with elevated rights so that
ie the nvidia binary driver and the vesa driver can keep working normally.
To make it possible for security concious users who don't need the root
rights to completely remove the wrapper, Xorg is started in a 3 step process
when the wrapper is enabled during build time:
1) A simple shell script which checks if the wrapper is there, if it is
it executes the wrapper, if not it directly executes the real Xorg binary
2) The wrapper gets executed, does its checks, normally drops all elevated
rights and then executes the real Xorg binary
3) The real Xorg binary does its thing
This allows distributions to put the wrapper binary in a separate package, and
will allow users to remove this package. IE the plan with Fedora is to make
"legacy" drivers depend on the wrapper pkg, and since our default install
contains some legacy drivers it will be part of the default install, but
users can later yum remove it (which will also automatically remove the
legacy driver packages as those won't work without it anyways).
The wrapper is loosely modelled after the existing Debian Xwrapper, it
uses the same config-file + config-file format, and also allows restricting
Xserver execution (through the wrapper) to console users only.
There also is a new needs_root_rights config file directive, which can
be used to override the auto-detection the wrapper does.
Hopefully this will allow Debian to replace their own wrapper with this
upstream one.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Only devices from the config backend have their attributes set, devices from
the xorg.conf only have Option "Device". That option is also set by the
config backend, so use it.
And since the config backend sets our major/minor but xorg.conf devices don't
have that set, make sure we try to stat it first where needed.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This makes how we handle video drivers identical to what we do for input
drivers, and this should make live easier for old non kms drivers.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
And use it from xf86platformAddDevice too, instead of directly calling
drvp->platformProbe.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
If there is only a single non kms video device (tested with the vesa driver),
then we will never get a resume signal for a drm node, so also call vtenter
when we get a resume for an input device.
Notes:
1) vtenter checks if it is ok to do the vtenter, so if there are kms video
devices the calls for input device resumes are a nop
2) This assumes that there will always be at least one server event fd
supporting input device. Since all non legacy input-drivers will be patched
to supported server fds this seems a safe assumption.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
The render-nodes case is untested.
v2: Add a flag for wayland to suppress the native DRI3 support.
Wayland isn't running as a master itself, so it can't do the auth
on its own and has to ask the compositor to do it for us. Dropped
XXX about randr provider -- the conclusion from discussion with
keithp was that if the driver's dri3_open for a provider on a
different screen, that's a core dri3 bug.
v3: Don't put quite so much under GLAMOR_NO_DRI3, and add a comment
explaining what this is about.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Porting this code to be non-xorg-dependent is going to take
significant hacking, so just dump it in the glamoregl module for the
moment, so I can hack on it while regression testing.
v2: Fix compiler warnings by adding #include dix-config.h at the top,
don't try to auto-init (I'll try to fix the xv ABI later).
v3: Fix last minute breakage of having reintroduced xf86ScrnToScreen
(one of the compat macros). Just use the drawable's pScreen instead.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This is not exposing the API we want long term, but it should get
existing DDX drivers up and running while we massage the API into
shape.
v2: Use LIBADD instead of LDFLAGS to fix deps on libglamor.la, and use
version 0.5.1 (the point it was forked from the external repo).
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Try to get a server managed fd from the Options before trying to open the
device node ourselves.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
With systemd-logind we cannot probe input devices while switched away, so
if we're switched away, put the pInfo on a list, and probe everything on
that list on VT-Enter.
This is using an array grown by re-alloc, rather than a xorg_list since
creating a new data-type to store a pInfo + list-entry just for this seems
overkill.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This commits makes the changes necessary outside of the systemd-logind core
to make the server use systemd-logind managed fds for input devices and drm
nodes.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This commits add the bulk of the systemd-logind integration code, but does
not hook it up yet other then calling its init and fini functions, which
don't do that much.
Note the configure bits check for udev since systemd-logind use will only be
supported in combination with udev. Besides that it only checks for dbus
since all communication with systemd-logind is happening over dbus, so
no further libs are needed.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
With systemd-logind support, the xserver, rather than the drivers will be
responsible for opening/closing the fd for drm nodes.
This commit adds a fd member to OdevAttributes to store the fd to pass it
along to the driver.
systemd-logind tracks devices by their chardev major + minor numbers, so
also add OdevAttributes to store the major and minor.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
The OdevAttributes struct should just be a head of the attributes list, and
not contain various unrelated flags. Instead add a flags field to
struct xf86_platform_device and use that.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Add a couple of new functions for dealing with storing integer values into
OdevAttributes.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Add a config_odev_get_attribute helper, and replace the diy looping over all
the attributes done in various places with calls to this helper.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
With systemd-logind support, the xserver, rather than the drivers will be
responsible for opening/closing the fd for input devices.
This commit adds a new capabilities field to the InputDriverRec and a
XI86_DRV_CAP_SERVER_FD flag for drivers to indicate that they support server
managed fds.
This commit adds a new XI86_SERVER_FD flag to indicate to drivers when the
server is managing the fd and they should not open/close it. Note that even
if drivers declare they support server managed fds there is no guarantee they
will actually get them.
Since this changes the input driver ABI, this commit bumps it.
systemd-logind tracks devices by their chardev major + minor numbers, since
we are breaking ABI anyways also add major and minor fields for easy storage /
retrieval of these.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Detaching from our controlling tty makes little sense when it is the same
as the vt we're asked to run on. So automatically assume -keeptty in this case.
This is useful to do because when not running as root the server can only make
various VT related ioctls when it does not detach from the tty.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
There is no reason why keeptty cannot be used without root-rights.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
On something like cirrus, start X, then attempt to start a second
X while the first is running, if fbdev is installed it'll fail
hard.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Just for consistency, I'm pretty sure the code is generally not happy for
malloc failures anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
asm/mtrr.h makes this an unsigned long on 32, but a u64 on 64. Cast
it to a long to win.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
No const value is ever assigned to it, let's not pretend it's const.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Only Xorg -configure uses a hardcoded value here, so let's not change the rest
of the server for that.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
The only place this isn't allocated is during Xorg -configure where we just
statically assing "mouse"/"kbd" and the identifiers for it. Everywhere else
it's strdup'd and then free'd already.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Allocated in one place, freed in another.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
This reverts commit 22592855e9.
What warning was this supposed to fix?
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This reverts commit f71de60355.
What warnings?
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Just forcing everything to const char* is not helpful, compiler warnings are
supposed to warn about broken code. Forcing everything to const when it
clearly isn't less than ideal.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The detailed timings are for a 15.6" display when max image size
correctly reports 13.3".
Signed-off-by: Arun Raghavan <arun@accosted.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Factor this code out into functions so that it can be re-used for the
systemd-logind device pause/resume paths.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Use kernel goto style error handling for xf86VTSwitchAway() failure. This
makes it much easier to read the straight path.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
With systemd-logind the dbus-core will be used for more then just config, so
it should be possible to build it even when using a non dbus dependent config
backend.
This patch also removes the config_ prefix from the dbus-core symbols.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Updated patch following Hans de Goede's advice.
If -seat option is passed with a value different from seat0,
X server won't call xf86OpenConsole().
This is needed to avoid any race condition between seat0 and
non-seat0 X servers. If a non-seat0 X server opens a given VT
before a seat0 one which expects to open the same VT, one can
get an inactive systemd-logind graphical session for seat0.
This patch was first tested in a multiseat setup with multiple
video cards and works quite well.
I suppose it can also make things like DontVTSwitch and -sharevts
meaningless for non-seat0 seats, so it may fix bug #69477, too.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=71258https://bugs.freedesktop.org/show_bug.cgi?id=69477 (maybe)
See also: http://lists.x.org/archives/xorg-devel/2013-October/038391.htmlhttps://bugzilla.redhat.com/show_bug.cgi?id=1018196
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Flagged by cppcheck 1.62:
[hw/xfree86/common/xf86Helper.c:220] -> [hw/xfree86/common/xf86Helper.c:231]:
(warning) Possible null pointer dereference: pScrn - otherwise it is
redundant to check it against null.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
These are generated in code which uses sprintf as a convenient way to
construct strings from various pieces.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This lets us stop using the 'pointer' typedef in Xdefs.h as 'pointer'
is used throughout the X server for other things, and having duplicate
names generates compiler warnings.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Having this function be static generates a compiler warning.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
CARD32 is not type compatible with uint32_t and ends up generating a
pile of warnings. Fix this by replacing all of the CARD* types with
stdint types.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
It won't exist until the build is complete, so don't complain about it
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
And fix resulting warnings.
v2: (Adam Jackson) Cast handles through uintptr_t to avoid size change warnings
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
defaultFontPath is now a const char * so that it can be initialized
from a string constant. This patch kludges around that by inserting
suitable casts to eliminate warnings. Fixing this 'correctly' would
involve inserting some new variables and conditionals to use them.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This gets the easy warnings, mostly constant string problems.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Make lots of string pointers 'const char' so that we can use constant
strings with them without eliciting warnings.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This avoids compiler warnings when initializing with string constants.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Instead of only relying on the Range section, we can do better on
HDMI to find out what is the max dot clock the monitor supports. The
HDMI CEA vendor block adds a TMDS max freq we can use.
This makes X not prune 4k resolutions on HDMI.
v2: Replace X_INFO by X_PROBED in the message that prints the max
TMDS frequency (Chris Wilson)
Reviewed-by: Chris Wilson <chris at chris-wilson.co.uk>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
The HDMI CEA vendor specific block has some interesting information,
such as the maximum TMDS dot clock.
v2: Don't parse CEA blocks with invalid offsets, remove spurious
brackets (Chris Wilson)
v3: Fix the looping through the CEA data blocks, it had a typo using the
wrong variable coming from the code it was ported from.
Replace x << 16 + y << 8 + z by x << 16 | y << 8 | z
(Chris Wilson)
v4: Remove the stray ';' at the end of "if (*end == 0)".
(Dominik Behr on IRC)
Reviewed-by: Chris Wilson <chris at chris-wilson.co.uk>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
On UEFI machines you'd prefer fbdev to grab efifb instead of vesa trying
to initialize and failing in a way we can't unwind from. On BIOS
machines this is harmless: either there is an fbdev driver and it'll
probably be more capable, or there's not and vesa will kick in anyway.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
... unless you explicitly disabled it with -bs on the command line, or
with the corresponding thing in xorg.conf.
v2: Drop a bogus hunk from compChangeWindowAttributes [vsyrjala]
v3: s/TRUE/WhenMapped/ [jcristau]
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Since we're using RedirectAutomatic to do this, we don't actually
preserve contents when unmapped.
v2: Don't say WhenMapped if Composite didn't initialize [vsyrjala]
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Would only work on ScreenRec 0, which means it's broken.
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Newer Linux kernels support DSI outputs. To be able to identify them
properly, add DSI to the list of output names.
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This array isn't used anywhere outside this file, so it can be made
static. While at it, make the array const as well.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Add const to any immutable string pointers.
Rename 'range' to 'prop_range' to avoid redefined warning.
Eliminate some unused return values.
Signed-off-by: Keith Packard <keithp@keithp.com>
With outputless GPUs showing up we crash here if there are not outputs
try and recover with a bit of grace.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Since all the inb/outb/etc. use in the X server itself (except for
xf86SlowBcopy) has been replaced by calls to libpciaccess, we no
longer need to pass inline assembly files to replace the gcc inline
assembly from hw/xfree86/common/compiler.h when building Xorg itself.
The .il files are still generated and installed in the SDK for the
benefit of drivers who may use them.
Binary diff of before and after showed that xf86SlowBcopy was the
only function changed across the Xorg binary and all modules built
in the Xserver build, it just calls the outb() function now instead
of having the outb instructions inlined, making it a slightly slower
bcopy.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
When building on Solaris with _XOPEN_SOURCE set to a recent XPG release,
<stdlib.h> and other core headers start including <sys/regset.h>, which
has a bunch of unfortunately named macros such as "CS", "ES", etc. for
x86 & x64 registers which clash with existing variable & struct member
names in Xorg - so #undef these so they don't interfere with our use.
(Yes, have filed a bug against the system headers for exposing these,
but this solves the problem for building on existing releases.)
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This gets the server to link with xshmfence again, and also ensures
that the miSyncShm code is linked into the server with the reference
from sdksyms.
Signed-off-by: Keith Packard <keithp@keithp.com>
A call to Xrandr SetScreenConfig (for randr 1.1) causes the Xserver to
crash when xf86SetViewport() which does not check if the hardware is
accessible.
Wrap accesses to xf86SetViewport() with if (vtSema) { ... } to avoid that.
Signed-off-by: Egbert Eich <eich@freedesktop.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
When enabling/disabling input handlers in xf86VTSwitch() we treat Input-
and GeneralHandlers equally. The result is that after a VT switch the
masks for EnabledDevices and AllSockets are equal and the distiction
between both types is lost.
Signed-off-by: Egbert Eich <eich@freedesktop.org>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
EDID sometimes lies about screen sizes. Since the screen size is used
by clients to determine the DPI a wrong ration will lead to terrible
looking fonts.
Add a sanity check for the h/v ratio cutting off at 2.4. This would
still accept the cinemascope aspect ratio as valid.
Also add message suggesting to add a quirk table entry.
Signed-off-by: Egbert Eich <eich@freedesktop.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
DMPS calls dixSaveScreens() when turned off but not when turned
on. In most cases this is irrelevant as DPMS is done when a
key is hit in which case dixSaveScreens() will be called to
unblank anyhow. This isn't the case if we use xset (or the
DPMS extension directly) to unblank.
Check screenIsSaved to make sure the state needs to be changed
before calling dixSaveScreens().
Signed-off-by: Egbert Eich <eich@freedesktop.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
After fc3ab84d the pVideo field in DevToConfig[i] is no longer
initialized, so it's always NULL. This causes the duplicate finding
algorithm in the beginning of the function to not work anymore as it
is based on this field.
The symptom of this bug is that X -configure reports
Number of created screens does not match number of detected devices.
Configuration failed.
Server terminated with error (2). Closing log file.
rather than producing a working config file.
This patch fixes that bug by initializing the field before calling
xf86PciConfigureNewDev().
Cc: tvignatti@gmail.com
Signed-off-by: Soren Sandmann <ssp@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Adds DRM compatible fences using futexes.
Uses FD passing to get pixmaps from DRM applications.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Send RRResourceChangeNotify event when provider, output or crtc was created or
destroyed. I.e. when the list of resources returned by RRGetScreenResources and
RRGetProviders changes.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Michal Srb <msrb@suse.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
As of server 1.13, systems with DRM and Udev will have BUS_PLATFORM as
their primary bus type. However, drivers not implementing a
platformProbe function will still create entities of type BUS_PCI. We
need to account for this when checking for the primary entity.
Signed-off-by: Connor Behan <connor.behan@gmail.com>
Acked-by: Tormod Volden <debian.tormod@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Mesa doesn't ship DRI1 drivers as of 8.0, which is about 18 months and
three releases ago. The main reason to have wanted DRI1 AIGLX was to
get a GLX compositor working, but DRI1's (lack of) memory management API
meant that the cost of a GLX compositor was breaking direct GLX apps,
which isn't a great tradeoff.
Of the DRI1 drivers Mesa has dropped, I believe only mga stands to lose
some functionality here, since it and only it has support for
NV_texture_rectangle. Since that's required for every extant GLX
compositor I know of, I conclude that anybody with a savage, say, would
probably not notice AIGLX going away, since they wouldn't be running a
GLX compositor in the first place.
In the future we'd like to use GL in the server in a more natural way,
as just another EGL client, including in the GLX implementation itself.
Since there's no EGL implemented for DRI1 drivers, this would already
doom AIGLX on DRI1 (short of entirely forking the GLX implementation,
which I'm not enthusiastic about).
v2: Remove DRI1 from AIGLX conditionals in configure.ac [anholt]
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Without the logdir, the xserver will write the content of the log file on the
terminal stating that it cannot be written and will stop.
Refer to https://bugs.freedesktop.org/show_bug.cgi?id=3889
Reviewed-By: Matt Dew <marcoz@osource.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Still true that we should not use the lower case $(mkdir_p) version.
However, remove the 2005 comment as the MKDIR_P is widely used now.
Reviewed-By: Matt Dew <marcoz@osource.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
It is our duty to uninstall any files and/or directories that we installed
through install-data-local and install-exec-hook.
Currently the X symbolic link to Xorg remains on disk after running
make uninstall.
Note the exception for logdir which is usually shared by other modules.
Reviewed-By: Matt Dew <marcoz@osource.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
The former was explicitly designed to execute additional code after the binary
has been installed. The latter can be executed in any order, hence it's
current dependency on install-binPROGRAMS as a workaround.
The CYGWIN libXorg.exe.a target is an installation target rather than
a post-installation one, so it should not be done as a hook. It does not depend
on the Xorg executable being installed.
Automake:
"These hooks are run after all other install rules of the appropriate type,
exec or data, have completed. So, for instance, it is possible to perform
post-installation modifications using an install hook".
"With the -local targets, there is no particular guarantee of execution order;
typically, they are run early, but with parallel make, there is no way
to be sure of that".
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
This is not a problem on UNIX platforms, but on CYGWIN it creates a broken
link to Xorg rather than a link to Xorg.exe.
From the CYGWIN log on tinderbox, we can see that the executable Xorg.exe is
installed correctly. We can see the command used to create the link:
(cd /jhbuild/install/[...]/install/bin && rm -f X && ln -s Xorg X)
Note that the "relink" makefile target correctly appends $(EXEEXT) to Xorg.
Reviewed-By: Matt Dew <marcoz@osource.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
You can only register one drawable on a given damage, so there's no
reason to require the caller to specify the drawable, the damage is
enough. The implementation would do something fairly horrible if you
_did_ pass mismatched drawable and damage, so let's avoid the problem
entirely.
v2: Simplify xf86RotateDestroy even more [anholt]
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
No DDX overrode this, and we never actually called through that slot
anyway.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
newer automake gets quite noisy about this.
hw/xfree86/ddc/Makefile.am:7: warning:
'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS')
and many more of these.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Replace hardcoded SVR4 || linux || CSRG_BASED with an autoconf check and
the _POSIX_SAVED_IDS macro.
Suggested-by: Mark Kettenis <mark.kettenis@xs4all.nl>
Signed-off-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This at least mentions AutoAddGPU and hints at when you might
want to disable it.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Commit 8f4640bdb9 fixed a bit of a
chicken-and-egg problem by detaching GPU screens when their providers
are destroyed, which happens before CloseScreen is called. However,
this created a new problem: the GPU screen tears down its RandR crtc
objects during CloseScreen and if one of them is active, it tries to
detach the scanout pixmap then. This crashes because
RRCrtcDetachScanoutPixmap tries to get the master screen's screen
pixmap, but crtc->pScreen->current_master is already NULL at that
point.
It doesn't make sense for an unbound GPU screen to still be scanning
out its former master screen's pixmap, so detach them first when the
provider is destroyed.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The peculiar way we handle coordinates results in relative coordinates on
absolute devices being added to the last value, then that value is mapped to
the screen (taking the device dimensions into account). From that mapped
value we get the final coordinates, both screen and device coordinates.
To avoid uneven scaling on relative coordinates, they are pre-scaled by
screen ratio:resolution:device ratio factor before being mapped. This
ensures that a circle drawn on the device is a circle on the screen.
Previously, we used the ratio to scale x up. Synaptics already does its own
scaling based on the resolution and that is done by scaling y down by the
ratio. So we can remove the code from the driver and get approximately the
same behaviour here.
Minor ABI bump, so we can remove this from synaptics.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Emmanuel Benisty <benisty.e@gmail.com>
A constant deceleration of x simply means (delta * 1/x). We limited that to
values >= 1.0f for obvious reasons, but can also allow values from 0-1.
That means that ConstantDeceleration is actually a ConstantAcceleration, but
hey, if someone needs it...
X.Org Bug 66134 <http://bugs.freedesktop.org/show_bug.cgi?id=66134>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
* __FreeBSD_kernel_version doesn't exist anymore
* The removed check was for FreeBSD versions from before September 2000
which are no longer supported anyway
* Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=66045
Signed-off-by: François Tigeot <ftigeot@wolfpond.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This reverts commit 3209b094a3. After a
long debug session by Paul Berry, it appears that this was the commit
that has been producing sporadic failures in piglit front buffer
rendering tests for the last several years.
GetBuffers may return fresh buffers with invalid contents at a couple
reasonable times:
- When first asked for a non-fake-front buffer.
- When the drawable size is changed, an Invalidate has been sent, and
obviously the app needs to redraw the whole buffer.
- After a glXSwapBuffers(), GL allows the backbuffer to be undefined,
and an Invalidate was sent to tell the GL that it should grab these
appropriate new buffers to avoid stalling.
But with the patch being reverted, GetBuffers would also return fresh
invalid buffers when the drawable serial number changed, which is
approximately "whenever, for any reason". The app is not expecting
invalid buffer contents "whenever", nor is it valid. Because the GL
usually only GetBuffers after an Invalidate is sent, and the new
buffer allocation only happened during a GetBuffers, most apps saw no
problems. But apps that do (fake-)frontbuffer rendering do frequently
ask the server for the front buffer (since we drop the fake front
allocation when we're not doing front buffer rendering), and if the
drawable serial got bumped midway through a draw, the server would
pointlessly ditch the front *and* backbuffer full of important
drawing, resulting in bad rendering.
The patch was originally to fix bugzilla:
https://bugs.freedesktop.org/show_bug.cgi?id=28365
Specifically:
To reproduce, start with a large-ish display (i.e. 1680x1050 on my
laptop), use the patched glxgears from bug 28252 to add the
-override option. Then run glxgears -override -geometry 640x480
to create a 640x480 window in the top left corner, which will work
fine. Next, run xrandr -s 640x480 and watch the fireworks.
I've tested with an override-redirect glxgears, both with vblank sync
enabled and disabled, both with gnome-shell and no window manager at
all, before and after this patch. The only problem observed was that
before and after the revert, sometimes when alt-tabbing to kill my
gears after completing the test gnome-shell would get confused about
override-redirectness of the glxgears window (according to a log
message) and apparently not bother doing any further compositing.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
When SDL called this it was totally broken, actually hook
up to the underlying drmmode function.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=64808
Thanks to Peter Wu <lekensteyn@gmail.com> for harassing me.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Too many callers relied on the refcnt being handled correctly. Use a simple
wrapper to handle that case.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
There's no point in turning on outputs connected to GPU screens during initial
configuration. Not only does this cause them to just display black, it also
confuses clients when these screens are attached to a master screen and RandR
reports that the outputs are already on.
Also, don't print the warning about no outputs being found on GPU screens,
since that's expected.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Dave Airlie <airlied@gmail.com>
I didn't think we needed this before, but after doing some more
work with reverse optimus it seems like it should be called.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
scrn->display is a property of the main screen really, and we don't
want to have the GPU screens use it for anything when picking modes
or a front buffer size.
This fixes a bug where when you plugged a display link device, it
would try and allocate a screen the same size as the current running
one (3360x1050 in this case), which was too big for the device. Avoid
doing this and just pick sizes based on whats plugged into this device.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
When we disconnect an output/offload slave set the changed bits,
so a later TellChanged can do something.
Then when we remove a GPU slave device, sent change notification
to the protocol screen.
This allows hot unplugged USB devices to disappear in clients.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 6703a7c7cf
Author: Keith Packard <keithp@keithp.com>
Date: Tue Jan 8 20:24:32 2013 -0800
hw/xfree86: Require only one working CRTC to start the server.
changed the logic to try to set the mode on all connected outputs rather
than abort upon the first failure. The return error code was then
tweaked such that it reported success if it set a mode on any crtc.
However, this confuses the headless case where we never enable any crtcs
and also, importantly, never fail to set a crtc.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59190
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Also-written-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Fixes build on non-udev systems, since XSERVER_PLATFORM_BUS is only
defined in configure.ac if $CONFIG_UDEV_KMS is true.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
So when we VT switch back and attempt to flush the input devices,
we don't succeed because evdev won't return part of an event,
since we were only asking for 4 bytes, we'd only get -EINVAL back.
This could later cause events to be flushed that we shouldn't have
gotten.
This is a fix for CVE-2013-1940.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Revert 70739e817b and mostly revert
c31eac647a.
Further investigation shows the encountered race condition is between
lightdm and plymouth-splash, as implemented in the Ubuntu distribution
within the limitations of upstart's job coordination logic, and can (and
should) be fixed within those limiations. Not in xserver itself.
This leaves some of the diagnostic improvements from the recent patch
series, in case others run into a similar situation.
Signed-off-by: Bryce Harrington <bryce@canonical.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This path is technically executed through config/udev, but having two
messages in the form "config/udev: Adding drm device" makes it appear as if
the udev filters are wrong and it's trying to add the same device twice. In
fact, it's only one device, only added once, but a duplicate log message.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
We don't want to hotplug output devices while we are VT switched,
as we get races between multiple X servers on the device open, and
drm device master status. This just queues device opens until we return
from VT switch.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This replaces some previous uses of direct xf86Screens[0] accesses.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@gmail.com>
This is just a simple interface to avoid accessing x86Screens[0]
directly.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@gmail.com>
This removes a large number of redundant declaration warnings.
Signed-off-by: Jeremy White <jwhite@codeweavers.com>
Reviewed-by: Robert Morell <rmorell@nvidia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Bryce Harrington <bryce@canonical.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
If other processes have had drm open previously, xserver may attempt to
open the device too early and fail, with xserver error exit "Cannot
run in framebuffer mode" or Xorg.0.log messages about "setversion 1.4
failed".
In this situation, we're receiving back -EACCES from libdrm. To address
this we need to re-set ourselves as the drm master, and keep trying to
set the interface until it works (or until we give up).
See https://bugs.launchpad.net/ubuntu/+source/libdrm/+bug/982889
Signed-off-by: Bryce Harrington <bryce@canonical.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
And if we've had to delay booting due to not being able to set the
interface, fess up.
Signed-off-by: Bryce Harrington <bryce@canonical.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Bryce Harrington <bryce@canonical.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Bryce Harrington <bryce@canonical.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Bryce Harrington <bryce@canonical.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
Section "Monitor"
Identifier "a21inch"
Option "PreferredMode" "1600x1200"
Option "ZoomModes" "1600x1200 1280x1024 1280x1024 640x480"
EndSection
The option's effect is to search for and mark once each named mode in
the output modes list. So the specification order is free and the zoom
modes sequence follows the order of the output modes list. All marked
modes are available via the Ctrl+Alt+Keypad-{Plus,Minus} key
combination.
See also http://bugs.freedesktop.org/show_bug.cgi?id=17954.
This option has its use for combined monitor and television setups.
It allows for easy switching between 60 Hz and 50 Hz modes even when a
monitor refuses to display the input signal.
(Includes a few minor changes suggested by Aaron for v2)
Signed-off-by: Servaas Vandenberghe <vdb@picaros.org>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
If a device is not primary, the PCI device match fails because the
xf86-video-modesetting driver looks specifically for a PCI class match of
0x30000 with a mask of 0xffffff. This fails to match, for example, a
non-primary Intel VGA device, because it is reported as having a class of
0x38000.
Fix that by ignoring the low 16 bits of the class in the pci_id_match table.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed on IRC by Adam Jackson <ajax@redhat.com>
Otherwise, displays driven by GPU screens remain on all the time.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
So in the cold plug server shutdown case, we reap the resources
before we call CloseScreen handlers, so the config->randr_provider
is a dangling pointer when the xf86CrtcCloseScreen handler is called,
however in the hot screen unplug case, we can't rely on automatically
reaped resources, so we need to clean up the provider in the xf86CrtcCloseScreen
case.
This patch provides a cleanup callback from the randr provider removal
into the DDX so it can cleanup properly, this then gets called by the automatic
code for cold plug, or if hot unplug it gets called explicitly.
Fixes a number of random server crashes on shutdown
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=58174
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=891140
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The previous fix for the previous fix, didn't fully work,
If we don't set compat_output we end up doing derferences
of arrays with -1, leading to valgrind warnings.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Due to another bug, the modesetting/udl driver would fail to init properly
on hotplug, when it did the code didn't clean up properly, and on removing
the device the server could crash.
Found in F18 testing.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
A fixed-mode output device like a panel will often only inform of its
preferred mode through its EDID. However, the driver will adjust user
specified modes for display through use of a panel-fitter allowing
greater flexibility in upscaling. This is often used by games to set a
low resolution for performance and use the panel fitter to fill the
screen.
v2: Use the presence of the 'scaling mode' connector property as an
indication that a panel fitter is attached to that pipe.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=55564
xf86Cursor.c:19:18: warning: redundant redeclaration of 'inputInfo'
[-Wredundant-decls]
In file included from xf86Cursor.c:18:0:
../../../include/inputstr.h:614:57: note: previous declaration of
'inputInfo' was here
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Unused as of 5d309af2ed
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
This is necessary when the input handler deletes itself from the
list. Bug found by Maarten Lankhorst, this patch uses the list macros
instead of open-coding the fix.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
man xorg.conf states that the 'Device' identifier is required in the
'Screen' section, yet current xserver defaults properly and boots up
fine without it.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=20742
Signed-off-by: Bryce Harrington <bryce@canonical.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Instead of defaulting to -intel for Oaktrail, Medfield, and CDV chips,
default to -fbdev. For Poulsbo (only), attempt to use -psb if it's
installed, and fallback to fbdev otherwise. All other Intel chips
should use -intel.
This fixed an issue where -intel would load on these chips and cause a
boot failure. Newer -intel drivers avoid the boot hang, but it's still
the wrong driver to load, so why take chances.
The patch was originally created by Stefan Dirsch for OpenSUSE. We have
included it in our stable release (Ubuntu "quantal" 12.10) since
December.
ref: https://bugzilla.novell.com/show_bug.cgi?id=772279
ref: https://bugs.launchpad.net/ubuntu/+bug/1069031
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=60514
Signed-off-by: Bryce Harrington <bryce@canonical.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
If we're about to abort, we're already in the signal handler and cannot call
down to the default device cleanup routines (which reset, free, alloc, and
do a bunch of other things).
Add a new DEVICE_ABORT mode to signal a driver's DeviceProc that it must
reset the hardware if needed but do nothing else. An actual HW reset is only
required for some drivers dealing with the HW directly.
This is largely backwards-compatible, hence the input ABI minor bump only.
Drivers we care about either return BadValue on a mode that's not
DEVICE_{INIT|ON|OFF|CLOSE} or print an error and return BadValue. Exception
here is vmmouse, which currently ignores it and would not reset anything.
This should be fixed if the reset is required.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
If acpid sends a string in a format that we can't parse, bail out instead of
potentially dereferencing a NULL-pointer.
X.Org Bug 73227 <http://bugs.freedesktop.org/show_bug.cgi?id=73227>
Signed-off-by: Ted Felix <ted@tedfelix.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Call find_header first, returning on failure before calling malloc.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Found by parfait 1.1 memory analyser:
Memory leak of pointer 'pAdapt' allocated with malloc((88 * num_adaptors))
at line 162 of hw/xfree86/common/xf86xvmc.c in function 'xf86XvMCScreenInit'.
'pAdapt' allocated at line 158 with malloc((88 * num_adaptors)).
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Also avoids leaving invalid pointers in structures if realloc had to
move them elsewhere to make them larger.
Found by parfait 1.1 code analyzer:
Memory leak of pointer 'newCallbacks' allocated with realloc(((char*)offman->FreeBoxesUpdateCallback), (8 * (offman->NumCallbacks + 1)))
at line 328 of hw/xfree86/common/xf86fbman.c in function 'localRegisterFreeBoxCallback'.
'newCallbacks' allocated at line 320 with realloc(((char*)offman->FreeBoxesUpdateCallback), (8 * (offman->NumCallbacks + 1))).
newCallbacks leaks when newCallbacks != NULL at line 327.
Memory leak of pointer 'newPrivates' allocated with realloc(((char*)offman->devPrivates), (8 * (offman->NumCallbacks + 1)))
at line 328 of hw/xfree86/common/xf86fbman.c in function 'localRegisterFreeBoxCallback'.
'newPrivates' allocated at line 324 with realloc(((char*)offman->devPrivates), (8 * (offman->NumCallbacks + 1))).
newPrivates leaks when newCallbacks == NULL at line 327.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reported by parfait 1.1 code analyzer:
Error: Null pointer dereference (CWE 476)
Read from null pointer 'p'
at line 746 of hw/xfree86/common/xf86Option.c in function 'xf86TokenToOptName'.
Function 'xf86TokenToOptinfo' may return constant 'NULL' at line 721, called at line 745.
Null pointer introduced at line 721 in function 'xf86TokenToOptinfo'.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Our in-house parfait 1.1 code analysis tool complained that every exit
path from xf86ValidateModes() in hw/xfree86/common/xf86Mode.c leaks the
storeClockRanges allocation made at line 1501 with XNFalloc.
Investigating, it seems that this code to copy the clock range list to
the clockRanges list in the screen pointer is just plain insane, and
according to git, has been since we first imported it from XFree86.
We start at line 1495 by walking the linked list from scrp->clockRanges
until we find the end. But that was just a diversion, since we've found
the end and immediately forgotten it, and thus at 1499 we know that
storeClockRanges is NULL, but that's not a problem since we're going to
immediately overwrite that value as the first thing in the loop.
So we move on through this loop at 1499, which takes us through the
linked list from the clockRanges variable, and for every entry in
that list allocates a new structure and copies cp to it. If we've
not filled in the screen's clockRanges pointer yet, we set it to
the first storeClockRanges we copied from cp. Otherwise, as best
I can tell, we just drop it into memory and let it leak away, as
parfait warned.
And then we hit the loop action, which if we haven't hit the end of
the cp list, advances cp to the next item in the list, and then just
for the fun of it, also sets storeClockRanges to the ->next pointer it
has just copied from cp as well, even though it's going to overwrite
it as the very first instruction in the loop body.
v2: rewritten using nt_list_* macros from Xorg's list.h header
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
The changes to miPointerSetPosition interface from int->double breaks
the SIS driver build, so time to bump this.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
DGA only handles master devices but it does intercept slave device events as
well (since the event handlers are per event type, not per device).
The DGA code must thus call into UpdateDeviceState to reset the button/key
state on the slave device before it discards the remainder of the event.
Test case:
- Passive GrabModeSync on VCP
- Press button
- Enable DGA after ButtonPress
- AllowEvents(SyncPointer)
- Release button
The button release is handled by DGAProcessPointerEvent but the device state
is never updated, so the slave ends up with the button permanently down.
And since the master's button state is the union of the slave states, the
master has the button permanently down.
X.Org Bug 59100 <http://bugs.freedesktop.org/show_bug.cgi?id=59100>
Reported-by: Steven Elliott <selliott4@austin.rr.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reported-by: Steven Elliott <selliott4@austin.rr.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Instead of requiring every mode set to complete successfully, start up
as long as at least one CRTC is working. This avoids failures when one
or more CRTCs can't start due to mode setting conflicts.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
So the kernel removes the device, and the driver processes the first
udev event, and gets no output back from the kernel, so it check
and don't fall over.
This fixes a couple of crashes seen when hotplugging USB devices.
Signed-off-by: Dave Airlie <airlied@redhat.com>
This commit regresses dri1 since it moves the drmSetServerInfo from being
called at module load time to extension init time. However DRIScreenInit
relies on this being called before it gets control.
This patches moves the call into DRIScreenInit and seems to work here.
Signed-off-by: Dave Airlie <airlied@redhat.com>
The formatter confused address operators preceded by casts with
bitwise-and expressions, placing spaces on either side of both.
That syntax isn't used by ordinary address operators, however,
so fix them for consistency.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Recent versions of the X server no longer provide this function, which
has been obsolete for over 2 years now.
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Following commit 37d956e3ac
Author: Keith Packard <keithp@keithp.com>
Date: Mon Sep 10 11:14:20 2012 +1000
xf86: fix compat output selection for no output GPUs
headless servers can no longer startup as we no longer select a compat
output for the fake framebuffer.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=56343
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
For non-PCI video devices, such as those found on many ARM embedded
systems, the X server currently requires the BusID option to specify the
full path to the DRM device's sysfs node in order to properly match it
against the probed platform devices.
In order to allow X to start up properly if either the BusID option was
omitted or no configuration is present at all, the first video device is
used by default.
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
K_OFF is a slightly broken interface, since if some other process
(cough, systemd) sets the console state to K_UNICODE then it undoes
K_OFF, and now Alt-F2 will switch terminals instead of summoning the
Gnome "run command" dialog.
KDSKBMUTE separates the "don't enqueue events" logic from the keymap, so
doesn't have this problem. Try it first, then continue falling back to
older methods.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=859485
Tested-by: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
These functions are already declared in <X11/fonts/fontproto.h>.
Redeclaring them just for _X_EXPORT causes tons of warnings throughout
xserver, but they need to be declared somewhere to be picked up by
sdksyms.sh. Doing so in a private header limits the warnings to
sdksyms.c; fixing those as well would require changes to fontsproto.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Recent Linux kernels reworked the linux/input.h header file, which is
now part of the "user-space API". The include guard therefore has an
additional additional _UAPI prefix.
Instead of adding another case to the #ifdef, drop any include guard
checks and instead always undefine the BUS_* definitions on Linux.
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Fix compilation of Xorg DDX without XF86VIDMODE since 6e74fdda, by putting
xf86vmode.c back under the XF86VIDMODE automake conditional it was accidentally
taken out of.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Tested-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
This call is required for external drivers (specifically NVIDIA) that do
not share the xfree86 infrastructure to update the desktop dimensions.
Without it, the driver would update the ScreenRecs but not update the total
dimensions the input code relies on for transformation.
This call is a thin wrapper around the already-existing internal call and
should be backported to all stable series servers, with the minor ABI bump.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
CC: Andy Ritger <aritger@nvidia.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
I noticed that the build-in int10 driver always reports
"Unable to retrieve all of segment 0x0C0000."
even though the entire BIOS data is retrieved with success.
The associated code is in hw/xfree86/int10/generic.c, in the function
xf86ExtendedInitInt10():
if (pci_device_read_rom(pInt->dev, vbiosMem) < V_BIOS_SIZE) {
xf86DrvMsg(screen, X_WARNING,
"Unable to retrieve all of segment 0x0C0000.\n");
}
The function pci_device_read_rom() is from libpciaccess; its return
value is not a size but an error status code: 0 means success.
If pci_device_read_rom() returns 0 for success, the warning is generated.
The proposed patch corrects the evaluation of the return value of
pci_device_read_rom() and of the supplied BIOS size.
Debian bug#686153
Signed-off-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Commit 09e4b78f missed a case.
Signed-off-by: Jason Gerecke <killertofu@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Remove any reference to mibstore.h and miInitializeBackingStore() from
the documentation.
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Remove more backing store leftovers.
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This is a really awkward interface, since we're calling it well before
the driver knows what device it's going to drive. Drivers with both KMS
and UMS support therefore don't know whether to say they need I/O port
access or not, and have to assume they do.
With this change we now call it only to query whether port access might
be needed; we don't use that to determine whether to call a driver's
probe function or not, instead we call them unconditionally. If the
driver doesn't check whether port access was enabled, they might crash
ungracefully. To accomodate this, we move xorgHWAccess to be explicitly
intentionally exported (sigh xf86Priv.h) so that drivers can check that
before they attempt port access.
v2: Move initial xf86EnableIO() nearer the logic that determines whether
to call it, suggested by Simon Farnsworth.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk>
Signed-off-by: Adam Jackson <ajax@redhat.com>
We load the driver list, then enable I/O, then call driver probe based
on whether I/O enable succeeded. That's bad, because the loaded
security policy might forbid port access. We happen to treat that as
fatal for some reason, which means even drivers that don't need I/O
access (like kms and fbdev) don't get the chance to run. Facepalm.
How about we just make that non-fatal instead, that sounds like a much
better plan.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Pull platform methods into their own sections for legibility, and
rewrite the ifdefs to be more concise.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk>
Signed-off-by: Adam Jackson <ajax@redhat.com>
If we are not seat 0 the following apply:
don't probe any bus other than platform
don't probe any drivers other than platform
assume the first platform device we match on the bus is the primary GPU.
This just adds checks in the correct places to ensure this, and
with this X can now start on a secondary seat for an output device.
v2: fix Seat0 macros
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This solves a race if we are trying to dynamically power off
secondary GPUs. Its not the greatest fix ever but it probably
as good as we can do for now.
The GPU probing causes the devices to be powered up, then when
we scan the PCI bus we get the correct information from the kernel,
rather than a bunch of 0xff due to the device being powered off.
drop gratuitous '&'.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
After we share the pixmap, the backing storage may have changed,
and we need to invalidate and buffers pointing at it.
This fixes GL compositors and prime windows lacking contents initially.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Otherwise we can't do fast user switch properly for multiple GPUs.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is set by pre_init not screen init, so if we free it here
and then recycle the server, we lose all the providers.
I think we need to wrap FreeScreen here to do this properly,
will investigate for 1.14 most likely, safer to just leak this
on server exit for now.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>