Conflicts:
hw/xfree86/common/xf86Init.c
hw/xfree86/int10/pci.c
hw/xfree86/scanpci/xf86PciData.h
hw/xfree86/scanpci/xf86PciStdIds.h
hw/xfree86/scanpci/xf86PciStr.h
hw/xfree86/scanpci/xf86ScanPci.h
hw/xfree86/utils/pcitweak/pcitweak.c
hw/xfree86/utils/scanpci/scanpci.c
Re-removed most of the conflicting files.
okay? Since xf86MapLegacyIO is called from only one place, cut the
parameter list down to the one parameter that actually conveys some
information: the one that gives a PCI device. Change from using a
PCITAG to a pci_device.
Get rid of almost all uses of these definitions. They're still defined for
delinquent out-of-tree drivers, and also for the Mesa build. As well as
for miinitext.c. But largely gone.
function pointers to implement a level of flexability that was never
used. The code also had unused support for extracting a single image
type from a larger expansion ROM.
Fix the spelling of PCI_BIOS_OPEN_FIRMWARE.
Fix a couple errors in #ifdef debug code.
These changes have been tested on x86 and x86-64 Linux.
Class information is not, and never has been, stored there. Therefore,
this is just a bunch of elaborate code to read 0x00000000.
This has received testing on x86 and x86-64 Linux.
Attempt to build xeglmodule.c, not xglxmodule.c.
Add xf86Sbus.h to EXTRA_DIST, as _HEADERS doesn't appear to get the same
treatment as _SOURCES in terms of automatically DISTing.
- Use x86emu on Solaris instead of vm86
- Better per-OS control over which xf86Kbd*.c and *Pci.c files to build
- Set various #defines to be defined or not on Solaris as needed
Add XSERV_t, TRANS_SERVER, TRANS_REOPEN to quash warnings.
Add #include <dix-config.h> or <xorg-config.h>, as appropriate, to all
source files in the xserver/xorg tree, predicated on defines of
HAVE_{DIX,XORG}_CONFIG_H. Change all Xfont includes to
<X11/fonts/foo.h>.
change "foo.h" to <X11/foo.h> for core headers, e.g. X.h, Xpoll.h;
change "foo.h", "extensions/foo.h" and "X11/foo.h" to
<X11/extensions/foo.h> for extension headers, e.g. Xv.h;
change "foo.[ch]" to <X11/Xtrans/foo.[ch]> for Xtrans files.
xc/programs/Xserver/hw/xfree86/os-support/linux/lnx_io.c
//bugs.freedesktop.org/show_bug.cgi?id=825) attachment #956
(https://bugs.freedesktop.org/attachment.cgi?id=956): Fix build
problems on Linux/SPARC. Patch by Jeremy Huddleston
<eradicator@gentoo.org>. Approved in the 2005-01-31 Xorg
release-wranglers phone call.
permissions when no access to HW registers is required. For API changes
which mostly involve the modifications to make the RRFunc (introduced
with 6.8) more flexible please check Bugzilla #2407. NOTE: This patch
applies changes to OS specific files for other OSes which I cannot
test.
Avoid PIO access on IA64. Some IA64 machine check if legacy ports outside
the VGA range are accessed. The ATi driver however does this to probe
for ISA Mach8/32/64. Since no IA64 has ISA slots this restriction
should not be relevant to the user.
Avoid recursive calls of xf86scanpci(). This function normally detects that
it has been called before by checking if the PCI structure is filled
out. So far if this was not the case (because PCI probing has failed
for some reason) the function is traversed again. With the chipset
specific PCI bus probing this can lead to an endless recursive loop as
the post-probing code calls xf86scanpci() from within this function.
The OS specific PCI code for Linux worked only if bus 0 was populated as it
checked for the presence of /proc/bus/pci/00. Fixed to check for
/proc/bus/pci/<bus_to_look_for> instead.
XScreenSaverSetAttributes() followed by XScreenSaverUnsetAttributes().
Caused by missing FreeResource() in XScreenSaverUnsetAttributes().
Removing unused DDC sections that caused misinterpretation of DDC data due
to a missing break statement in a switch.
Fixed typo: #if <-> #ifdef.
chipsets can be probed without OS support as probing them is only
possible using ACPI. One example of this are the HP ZX1/2 chipsets:
previously the code assumed that these chips were present when no other
of the known chipsets could be probed. This assumption brought SGI
Altrix machines with 64 CPUs to a grinding halt.
IA64 (Egbert Eich).
Fixed wrong function prototype (Egbert Eich).
Don't test for generic VGA on IA64 (Egbert Eich).
Fixed a segfault when accessing a structure before verifying the pointer
exists (Egbert Eich).
Added a showcache option for debugging (Egbert Eich).
Increase default video RAM size to 16MB when DRI is enabled and more than
128MB are available (Egbert Eich). Fixed lockups during mode switch.
Problem was introduced when attempting to copy the behavior during
LeaveVT()/EnterVT() but but forgetting to call I810DRILeave() before
I810DRIEnter(). The entire DRILeave()/Enter() scenario has been
commented out as it didn't seem to be necessary (Egbert Eich).
Fix TweakMemorySize() (tested with i855/i865) (Egbert Eich).
increased MAX_DEVICES to 128 (Egbert Eich).
Use OS provided PCI config space access as default method (Egbert Eich).
Added support for Linux 2.6 proc file format.
Fixed unaligned accesses to pieces of the VBE info block. VESA did not
align elements to size (Egbert Eich).
