A lot of EDID writers apparently end up stuffing centimeters (like the
maximum image size field) into the detailed timings, instead of millimeters.
Some of them only get it wrong in one direction. Also, add a quirk to let
us mark the largest 75hz mode as preferred, which will often be used for
EDID 1.0 CRTs.
If none is present, a default one will be created. This will be attached
to either the first device section in the xorg.conf (allowing you to
specify something like using EXA without having a screen section) or a
default screen section if none is present in the file.
This will allow the screen to not explicitly have a device section. If
this is the case and there is a device section in the xorg.conf, the first
one will be used. If there is no device section at all, a default one will
be created that loads the automatically determined module.
This is what we're currently shipping in Debian. Enables the ability for
drivers to ship a text file listing PCI ID's they support, and have the
server read them on startup when no driver is specified. This works, but
isn't the final solution.
* hw/kdrive/ephyr/ephyr.c:
(ephyrInitScreen): try and detect when the host has no
DRI support. In that case, switch to the -nodri behaviour.
When in the -nodri case, make sure not to skip glx visual
initialisation.
* hw/kdrive/ephyr/ephyrinit.c:
(ddxProcessArgument): disabling visual init here
is bad because it gets disabled even when we want
to use software GL, leading to Xephyr :1 -nodri
crashing in mesa.
This reverts commit 1365aeff54.
It defeated the optimization for drivers that don't provide a CreatePixmap
hook. The optimization makes no sense for drivers that do anyway, so disable
it for them completely.
We can now launch GL or XV apps in any of the
Xephyr screens we want.
* hw/kdrive/ephyr/hostx.c,h:
(hostx_get_window):
(hostx_create_window): make these functions be screen
number aware.
* hw/kdrive/ephyr/XF86dri.c : fix some compiler warnings.
* hw/kdrive/ephyr/ephyrdri.c:
(ephyrDRIQueryDirectRenderingCapable),
(ephyrDRIOpenConnection),
(ephyrDRIAuthConnection),
(ephyrDRICloseConnection),
(ephyrDRIGetClientDriverName),
(ephyrDRICreateContext),
(ephyrDRIDestroyContext),
(ephyrDRICreateDrawable),
(ephyrDRIGetDrawableInfo),
(ephyrDRIGetDeviceInfo): in all those functions, don't forward
the screen number we receive - from the client - to the host X.
We (Xephyr) are always targetting the same X display screen, which is
the one Xephyr got launched against. So we enforce that in the code.
* hw/kdrive/ephyr/ephyrdriext.c:
(EphyrMirrorHostVisuals): make this duplicate the visuals of the host X
default screen into a given Xephyr screen. This way we have a chance
to update the visuals of all Xephyr screen to make them mirror those
of the host X.
(many other places): specify screen number where required by the api
change in hostx.h.
* hw/kdrive/ephyr/ephyrglxext.c: specify screen number where required
by the api change in hostx.h
* hw/kdrive/ephyr/ephyrhostglx.c: don't forward the screen number we
receive - from the client - to the host X.
We (Xephyr) are always targetting the same
X display screen, which is
the one Xephyr got launched against. So we enforce that in the code.
* hw/kdrive/ephyr/ephyrhostvideo.c,h: take in account the screen number received
from the client app. This is useful to know on which Xephyr screen we
need to display video stuff.
* hw/kdrive/ephyr/ephyrvideo.c: update this to reflect the API change
in hw/kdrive/ephyr/ephyrhostvideo.h.
(ephyrSetPortAttribute): when parameters are not valid
- they exceed their validity range - send them to the host anyway
and do not return an error to clients.
Some host expose buggy validity range, so rejecting client for that
is too harsh.
* hw/kdrive/ephyr/hostx.c,h:
(hostx_has_xshape),
(hostx_has_glx),
(hostx_has_dri): added these new entry points
* hw/kdrive/ephyr/ephyrdriext.c:
(ephyrDRIExtensionInit):
check presence of DRI and XShape extensions before
trying to use them.
* hw/kdrive/ephyr/ephyrglxext.c:
(ephyrHijackGLXExtension):
check presence of glx extension before we use it.
* hw/kdrive/src/Makefile.am: use fb/fbcmap_mi.c
and not fb/fbcmap.c. This allows kdrive to take advantage of
extensions redefining the entry points of micmap.c stuff.
For instance it allows Xephyr to have a working GL, which is not
possible otherwise, because GL redefines mInitVisualsProc
to initialise its visuals.
* fb/fbcmap_mi.c:
(fbSetVisualTypesAndMasks): added this entry point that was missing.
This is useful so that servers using this entry point can use fbcmap_mi.c,
and be obliged to stick to fbcmap.c. Note that fbcmap.c does implement this
entry point. Up to now, kdrive based server could not use fbcmap_mi.c because this
entry point was missing. The will allow Xephyr to properly use GL.
* GL/glx/glxvisuals.c: added boolean to disable
calling init_visuals(). This gives a chance to Xephyr
to take over visuals manipulation and avoid a crash at
server shutdown in __glXMesaScreenDestroy(), due to the fact
that mesa might sees more visual than what it has actually created in
init_visuals(). It might see more visuals because Xephyr can augment
the number of visuals, dynamically.
* os/utils.c: the boolean is actually defined here.
* hw/kdrive/ephyr/ephyrdri.c:
(ephyrDRIGetDrawableInfo): force the back clipping rects
to equal the front clipping rects.
* hw/kdrive/ephyr/ephyrdriext.c:
(ProcXF86DRIGetDrawableInfo): properly overclip the clipping rects we
got from the client. This bug fixes a clipping rect that was too
small in height, basically. Also fix a possible mem corruption.
* hw/kdrive/ephyr/hostx.c:
(hostx_set_window_geometry): remove a useless XSync
* hw/kdrive/ephyr/ephyr.c:
(ephyrInitialize): cleanup ephyrDRI extension init.
remove functions that belongs in ephyrdriext.c .
* hw/kdrive/ephyr/ephyrdri.c:
(ephyrDRICreateDrawable): create the drawable on the host X peer
window, not on the host xephyr main window.
(ephyrDRIGetDrawableInfo): get drawable info of the host X peer
window.
* hw/kdrive/ephyr/ephyrdriext.c: make ephyr DRI extention wrap
a bunch of screen ops so that it can update the host X peer
window whenever DRI bound drawable are moved in Xephyr.
Also code the building blocks of the management of the
host X window peer.
* hw/kdrive/ephyr/hostx.c,h:
(hostx_create_window): added this new entry point
(hostx_destroy_window): ditto
()hostx_set_window_geometry): ditto
* hw/kdrive/ephyr/ephyrdri.c:
(ephyrDRIGetDrawableInfo): quickly hook
this into getting the drawable info from the host
X server. For the time being, this only gets the drawable info
of the Xephyr main window in the host. It should really get
the info of a the peer drawable in the host X. So there should be a
peer drawable to begin with.
* hw/kdrive/ephyr/ephyrdriext.c:
(ProcXF86DRIGetDrawableInfo): some cleanups. Properly get the
the drawable info otherwise there is a host X hang.
* hw/kdrive/ephyr/ephyrhostglx.c: do not
(ephyrHostGLXQueryVersion): do not use C bindings of the glx protocol
calls. Some of those actually access DRI context directly, resulting
in the context having three clients. Instead all XF86DRI proto
fowarding request should be coded by hand and only forward the
protocol requests
* hw/kdrive/ephyr/ephyrglxext.c:
fixed various logging functions
(ephyrGLXGetStringReal): make sure all the string is sent to clients
including the ending zero.
* hw/kdrive/ephyr/ephyrhostglx.c:
(ephyrHostGLXGetStringFromServer): better error handling.
(ephyrHostGLXSendClientInfo): ditto.
(ephyrHostGLXMakeCurrent): ditto
* hw/kdrive/ephyr/ephyr.c:
(EphyrDuplicateVisual): when duplicating the
visual, copy the color component masks and the class
from the hostX
(EphyrMirrorHostVisuals): don't mix blue and green mask.
* hw/kdrive/ephyr/ephyrdri.c: add more logs.
(ephyrDRICreateDrawable): actually implement this.
for the moment it creates a DRI drawable for the hostX window,
no matter what drawable this call was issued for.
(ephyrDRIGetDrawableInfo): actually implemented this.
for the moment the drawable info queried for its attrs is the
Xephyr main main window.
* hw/kdrive/ephyr/ephyrdriext.c:
(ProcXF86DRIGetDrawableInfo): properly hook this dispatch
function to the ephyrDRIGetDrawableInfo() function.
* hw/kdrive/ephyr/ephyrglxext.c: add a bunch of GLX implementation hooks
here. Hijack some of the xserver GLX hooks with them. Still need to
properly support byteswapped clients though.
* hw/kdrive/ephyr/ephyrhostglx.c,h: actually implemented the protocol
level forwarding functions used by the GLX entr points in
ephyrglxext.c. Here as well, there are a bunch of them, but we are
far from having implemented all the GLX calls.
* hw/kdrive/ephyr/hostx.c,h:
(hostx_get_window_attributes): added this new entry point
(hostx_allocate_resource_id_peer): added this to keep track of
resource IDs peers: one member of the peer is in Xephyr, the other
is in host X.
(hostx_get_resource_id_peer): ditto.
* hw/kdrive/ephyr/ephyr.c: make Xephyr mirror
the visuals of the host X upon startup. This
is important for GLX client apps.
* hw/kdrive/ephyr/hostx.c,h: add a hostx_get_visuals_info()
to get the visuals of the host X.
* hw/kdrive/ephyr/ephyrglxext.c:
(ephyrGLXGetFBConfigsSGIX): proxy the GLXGetFBConfigsSGIX call.
It is a vendor extension to get the visual configs as a list of
name/value pairs.
(ephyrHijackGLXExtension): hijack the VendorPriv_dispatch_info
dispatch table to register our implementation of GLXGetFBConfigsSGIX
(ephyrGLXGetFBConfigsSGIXReal): added this where the real
implementation of GLXGetFBConfigsSGIX is. It support bytes swapping.
(ephyrGLXGetFBConfigsSGIX,ephyrGLXGetFBConfigsSGIXSwap): these are
the dispatch entry points. They just call
ephyrGLXGetFBConfigsSGIXReal.
* hw/kdrive/ephyr/ephyrhostglx.c,h: reorganize the proxies to get
visual params from the host so that they clearly support the different
methods of doing so.
* hw/kdrive/ephyr/Makefile.am: add the proxy extension to
ephyr. The proxy extension is an experimental extension that
forwards protocol packets targeted at a given extension to the
host X.
* hw/kdrive/ephyr/ephyr.c: init proxy ext.
* hw/kdrive/ephyr/ephyrhostproxy.c,h: added this new file as part of the
proxy extension.
* hw/kdrive/ephyr/ephyrproxyext.c,h: ditto
* hw/kdrive/ephyr/hostx.c: add the hostx_get_get_extension_info() entry
point.
* hw/kdrive/ephyr/XF86dri.c: re format this correctly.
Make function decls honour the Ansi-C standard.
* hw/kdrive/ephyr/ephyr.c: protect glx/dri related
extension initialisation with the XEPHYR_DRI
macro. Initialize the GLX ext hijacking
at startup.
* hw/kdrive/ephyr/ephyrdri.c: add more logging to ease debugging
* hw/kdrive/ephyr/ephyrdriext.c: ditto. reformat.
* hw/kdrive/ephyr/ephyrglxext.c,h: add this extension to
proxy GLX requests to the host X. started to proxy those nedded to
make glxinfo work with fglrx. Not yet finished.
* hw/kdrive/ephyr/ephyrhostglx.c,h: put here the actual
Xlib code used to hit the host X server because Xlib stuff cannot be
mixed with xserver internal code, otherwise compilation erros due to
type clashes happen. So no Xlib type should be exported by the
entrypoints defined here.
