xthreads is an ancient wrapper around a half dozen or so common thread
APIs, including pthreads. Just use pthreads directly if you have it; if
you don't, get with the times.
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Solaris 7 and older are not supported; Solaris 8 and later have (and
use) pthreads.
Acked-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
The class field was unused for pixmaps, and we don't have enough classes
to justify a whole uint32 anyway.
Reviewed-by: Soren Sandmann <ssp@redhat.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
v2: Slightly more obvious sizing math.
==14882== Invalid write of size 2
==14882== at 0x6750267: VBEGetVBEInfo (vbe.c:400)
==14882== by 0x6142064: ??? (in /usr/lib64/xorg/modules/drivers/vesa_drv.so)
==14882== by 0x471895: InitOutput (xf86Init.c:519)
==14882== by 0x422778: main (main.c:205)
==14882== Address 0x4f32fa8 is 72 bytes inside a block of size 73 alloc'd
==14882== at 0x4A0640D: malloc (vg_replace_malloc.c:236)
==14882== by 0x675024B: VBEGetVBEInfo (vbe.c:398)
==14882== by 0x6142064: ??? (in /usr/lib64/xorg/modules/drivers/vesa_drv.so)
==14882== by 0x471895: InitOutput (xf86Init.c:519)
==14882== by 0x422778: main (main.c:205)
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
sdksyms.c is constructed by processing header files with the C
preprocessor. Its contents will vary depending on the precise
configuration options, and so must depend on the config header
files.
We have one header file which is always changed when any config option
is modified called do-not-use-config.h (which may want a different
name at some point), so make sdksyms.c depend on that file.
Also, we don't want to ship this file; it always needs to be
built. So, include it in the nodist_libloader_la_SOURCES list to
prevent it from being added to the tarball.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Nobody can have been using this, it's never called from extension init.
XI2 device properties should now be a functional replacement.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Christof Wolf has reported a regression that seems to be caused by
this change, so reverting the change in the 1.9 branch. We'll
investigate a proper fix in master for 1.10.
This reverts commit c89f052104.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Since commit b8d9c5ff removed commonOptions, we now
need to append the "Core{Keyboard,Pointer}" options to
the existing list.
Fixes passing options to devices confirured in xorg.conf
on systems where autoaddevices is false.
Signed-off-by: Matthieu Herrb <matthieu.herrb@laas.fr>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We now support using RandR to set the resolution of the primary display (and
place a shielding window on other displays) in multi-monitor configurations.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
This allows the remaining triangle-to-trap conversion code to be
deleted.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Søren Sandmann <ssp@redhat.com>
The fb version simply calls the new pixman_composite_triangles(). This
allows us to get rid of miCreateAlphaPicture().
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Søren Sandmann <ssp@redhat.com>
The main consumer of trapezoids, cairo, is using the Trapezoids
request, which is currently implemented in the miTrapezoids()
function. That function splits the request into smaller bits and calls
lower level functions such as AddTrap.
By moving the implementation of the whole request into fb, we can
instead call pixman_composite_trapezoids() to do the whole request in
one step.
There are no callers of miTrapezoids in any of the open source
drivers, although exa and uxa have their own copies of the function.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Søren Sandmann <ssp@redhat.com>
Let the compiler figure out the correct alignment for the axes data
for a valuator by using a union to force double alignment of the
initial ValuatorClassRec structure in the allocation.
Signed-off-by: Keith Packard <keithp@keithp.com>
Tested-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Instead of listing one of the doxygen output files and depending on
sequential execution to ensure that the other files were present
before make checked for them, create explicit dependencies so that
make will not check for the additional files until after doxygen has
been run.
This allows parallel make to work correctly in this directory.
Signed-off-by: Keith Packard <keithp@keithp.com>
Tested-by: Kristian Høgsberg <krh@bitplanet.net>
Tarballs include the downloaded gl spec files, which will end up in
$(srcdir). But, git-based builds will not have them at all and will
need to download them from opengl.org. They'll land in in the build
directory instead of $(srcdir), and so we need to allow them to be in
either place.
This change checks for the files in $(srcdir), linking them to . if
present. Otherwise, it downloads them from opengl.org.
A suggested better solution is to have Mesa install these files somewhere.
Signed-off-by: Keith Packard <keithp@keithp.com>
Tested-by: Kristian Høgsberg <krh@bitplanet.net>
The paths in doxygen.conf assumed that srcdir=builddir and broke
otherwise. Use autoconf to fill in the paths to the srcdir so that the
files can be found when users have a separate build directory (as with
distcheck).
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Tested-by: Cyril Brulebois <kibi@debian.org>
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Non-GNU makes don't deal with the sinclude or -include variants that
allow Makefile stubs to be created and then included during the build.
Instead, create an empty file at the end of configure so that the
regular include statement can be included. This is how automake handles
automatic source dependencies.
In order to trick automake into not processing the include statement, a
variable is used.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Tested-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Testcase:
xinput float <keyboard name>
results in the keyboard's enter key being repeated as the device is detached
while the key is still physically down. To avoid this, release all keys and
buttons before reattaching the device.
X.Org Bug 34182 <http://bugs.freedesktop.org/show_bug.cgi?id=34182>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Fernando Carrijo <fcarrijo@freedesktop.org>
If there's a GPU copy and a non-zero devKind was passed in, set the GPU copy
pitch to that instead of to a possibly bogus value derived from the new width.
This is e.g. used by the radeon driver's drmmode_xf86crtc_resize hook, fixes
https://bugs.freedesktop.org/show_bug.cgi?id=33929 .
On the other hand, the system memory copy doesn't need the pitch to be aligned
beyond the PixmapBytePad of the width.
Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Acked-by: Cyril Brulebois <kibi@debian.org>
Tested-by: Cyril Brulebois <kibi@debian.org>
Reported-by: Thierry Vignaud <thierry.vignaud@gmail.com>
Tested-by: Thierry Vignaud <thierry.vignaud@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
In OpenBSD removed support PCCONS in 2002 year
http://marc.info/?l=openbsd-cvs&m=102435816424294&w=2
Signed-off-by: Alexandr Shadchin <Alexandr.Shadchin@gmail.com>
Reviewed-by: Matthieu Herrb <matthieu.herrb@laas.fr>
Signed-off-by: Keith Packard <keithp@keithp.com>
RecordFlushReplyBuffer can call itself recursively through
WriteClient->CallCallbacks->_CallCallbacks->RecordFlushAllContexts
when the recording client's buffer cannot be completely emptied in one
WriteClient. When a such a recursion occurs, it will not be broken out
of which results in segmentation fault when the stack is exhausted.
This patch adds a counter (a flag, really) that guards against this
situation, to break out of the recursion.
One alternative to this change would be to change _CallCallbacks to
check the corresponding counter before the callback loop, but that
might affect existing behavior, which may be relied upon.
Reviewed-by: Rami Ylimäki <rami.ylimaki@vincit.fi>
Signed-off-by: Erkki Seppälä <erkki.seppala@vincit.fi>
Signed-off-by: Keith Packard <keithp@keithp.com>
