Xtst devices get this property assigned automatically so they can be
detected easily by a client.
The property is read-only.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Rather than storing a simple boolean in the devPrivate for XTest devices,
store the actual master device's id (since it is constant for the life of
the device anyway).
Callers should use GetXtstDevice now instead of digging around in the
devPrivates themselves.
This patch allows for a cleanup in the creation of new master devices since
GetMaster and GetXtstDevice spare the need for loops, IsPointer checks and
similar.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Benjamin Close <Benjamin.Close@clearchain.com>
The callers should need to use the dev privates key to look up xtest
devices.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Benjamin Close <Benjamin.Close@clearchain.com>
If the check fails, leave the device off the returned list of info
structures. Under XI2, this may cause inconsistent views of the device
topology after a change (for example, devices disappearing from view,
or showing as attached to a master that cannot be seen). More work is
needed to deal with topology changes and device relabeling.
Signed-off-by: Eamon Walsh <ewalsh@tycho.nsa.gov>
Presumably, some intelligent, XI2-aware management app will be calling
XISetClientPointer on behalf of other clients; this check makes sure
the target client has permission on the device.
Requires changing the prototype to return status code instead of Bool.
Signed-off-by: Eamon Walsh <ewalsh@tycho.nsa.gov>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
New access modes are being passed to the device access hook for XI2:
DixCreateAccess for creating a new master device;
DixAdd/RemoveAccess for attaching/removing slave devices to a master; and
DixListProp/GetProp/SetPropAccess for device properties.
Refer to the XACE-Spec document in xorg-docs, section "Device Access."
Signed-off-by: Eamon Walsh <ewalsh@tycho.nsa.gov>
Master devices provide the union of all attached slave devices' buttons,
i.e. the number of buttons on the master device is always the number of
buttons of the slave device with the highest number of buttons. When slaves
are attached or detached, the master device adjusts the button number to
reflect the new buttons.
On a slave switch, this slave's button labels are copied into the master (up
to slave->num_buttons). The remaining button labels (if any) stay as they
are. Thus, if any of the higher buttons is still pressed, it reflects the
label of the last pressed device that provided this button.
If two devices press the same button and it is differently labelled the last
pressed one will be reflected in the master device.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Note: ABI break, but ABI_XINPUT_VERSION has NOT been bumped. Recompile input
drivers.
Revert "Xi: return BadImplementation for deviceids 256 and above"
This reverts commit 2b459f44f3.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The previous code would always skip the last valuator due to a wrong
upper boundary in the loop. last_valuator is the index of the last set
valuator - which also means it must be initialized to -1, not 0.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Some files (notably those merged with MPX before XI2 came along) didn't use
a 'xi' prefix. This patch changes all of them to meaningful names.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If SetClientPointer fails, the only reason may be that the device is not a
pointer or that the device is an SD. Return BadDevice instead of BadAccess.
(BadAccess is a leftover from the early times of the ClientPointer
implementation when only one client was allowed to set it).
If the window parameter doesn't name a valid window or client, return
BadWindow.
Finally, allow both master keyboards and master pointers as deviceid.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This was quite old code and can be streamlined a bit. The new code is
essentially the same as in ProcXISetClientPointer.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Swapping the mask_len and then advancing the pointer by the swapped length
is just a bad idea.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The maximum number of bytes is calculated by the mask len, and the mask len
is always in 4-byte units. XI2MASKSIZE however is in bytes.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
zero-length masks are supposed to clear the device's mask.
ProcXISelectEvents passes these masks through directly, so we need to clear
the bits here if such a mask is supplied.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The data is already swapped before, so we just post it to the client as-is,
without attempting to swap it again.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
inputstr includes XI2proto.h for the sole purpose of XI_LASTEVENT.
However, using XI_LASTEVENT in the server is prone to errors, if the server
is recompiled against a newer version of the protocol it would bump this
variable and associates bits, including potential ABI.
This patch defines an XI2LASTEVENT for use in the server and removes the
XI2proto.h require. XI2LASTEVENT is the current value of XI_LASTEVENT.
This patch is required by components that require access to inputInfo
(currently xf86-video-geode and xf86-video-cirrus) but should not have a
require for the XI2 protocol.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Two issues that combined to false positives and false negatives.
- The checking for invalid bits must be performed when there are enough bits
that an event outside of LASTEVENT may be selected.
- The first invalid bit is LASTEVENT + 1, not LASTEVENT.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The protocol allows for 16 bit device ids, but the implementation doesn't
yet. We need to break the input ABI once more to shift the DeviceIntRec's
CARD8 to a CARD16, along with some changes in the privates.
Once that is done, revert this patch.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The server returned the minimum of major/minor each instead of the lower of
the combined major.minor version. As a result, a client reporting
3.0 and a server supporting 2.7, the return value would be 2.0 (the minimum
of both).
Reported-by: Rémi Cardona
Reported-by: Simon Thum
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
XIQueryVersion must return the client's version if the client's version is
lower than or equal to the server's version, or the server's version
otherwise.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
86077f0058ce88ee9b3df5d1ab854eeca43 switched from a boolean to a grabtype
enum. ProcXGrabDevice didn't switch with it. PickPointer during an XI grab
on a slave device would thus return a wrong (or NULL) device and crash the
server.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
These grabs are suported through two fake devices inputInfo.all_devices and
inputInfo.all_master_devices. These devices are not part of the device list
and are only initialised for their device id, nothing else.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
There's use-cases where this is useful, so take the check out preventing
that.
Reported-by: Thomas Jaeger
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If a passive enter or focus in grab activates, send additional enter or
focus events with mode XIPassiveGrabNotify to the grabbing client.
Likewise, if the grab deactivates, send additional leave or focus out
events.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Enter grabs are checked for in CheckMotion(), each time the sprite window
changes the current grab is deactivated (if applicable) and the new grab is
activated (if applicable). Exception - if the grab is on a parent window of
the current window since we keep the grab across descendants.
Since CheckMotion() may change the grab status of a device, we mustn't get
"dev->deviceGrab.grab" in ProcessOtherEvents until after CheckMotion().
FocusIn grabs are checked in much the same manner.
The event delivery for grabs replaces the NotifyNormal on window change with
a NotifyGrab on window change. Note that this happens before the grab
activates, so the EnterNotify(NotifyGrab) is still delivered to the window,
not to the grabbing client. This is in line with the core protocol semantics
for NotifyGrab events.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Not having the resource mask set means we never match an existing grab,
hence we never actually ungrab.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
In the case of a RevertToFollowKeyboard, the master device should be used
(since this is the closest equivalent to the VCK as before). Only if the
master keyboard is the same as the device, revert to the VCK itself.
This didn't use to be a problem when devices could only be pointers or
keyboards, not both. Nowadays, slave devices may have both buttons and
keyboards, and in this case we don't want to deactivate a passive keyboard
grab when a button release is detected.
The wire layout is [struct xXIEventMask][mask bytes]. So the pointer needs
to not only be advanced by the mask bytes, but also by the size of the
struct.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
chdevcur.c:97: warning: ‘SecurityLookupIDByType’ is deprecated (declared at
../include/resource.h:269)
xiproperty.c:200: warning: passing argument 2 of ‘GetEventFilter’ from
incompatible pointer type
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
There's devices (e.g. some barcode readers) that have axes but no buttons.
When such a device sends a motion event, the valuator and button class is
copied into the master pointer (i.e. removing the button class).
So we need a couple of extra sanity checks for the button class to exist.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Copying all classes into the master device has drawbacks for hybrid devices
(devices that are both mice and keyboards). If such a device posts an event,
it's key classes are moved into the VCP. The key event itself is unaffected
by keyboard grabs and the like.
Partial class copying copies depending on the event and copies the classes
into the right master device (i.e. the VCK for key events, the VCP for
pointer events).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
There's no need for internal events to be a struct with a single nested
union, we might as well make the union itself the InternalEvent.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
isMaster is not enough as long as we differ between master pointers and
keyboard. With flexible device classes, the usual checks for whether a
master device is a pointer (currently check for ->button, ->valuators or
->key) do not work as an SD may post an event through a master and mess this
check up.
Example, a device with valuators but no buttons would remove the button
class from the VCP and thus result in the
IsPointerDevice(inputInfo.pointer) == FALSE.
This will become worse in the future when new device classes are introduced
that aren't provided in the current system (e.g. a switch class).
This patch replaces isMaster with "type", one of SLAVE, MASTER_POINTER and
MASTER_KEYBOARD. All checks for dev->isMaster are replaced with an
IsMaster(dev).
dev->u.lastSlave was not signal safe since it was accessed by the DIX and
during signal handling.
Replaced with:
'dev->last.slave' for the signal handler's lastSlave (used to generate
DeviceChangedEvents), .
'dev->u.lastSlave' for the DIX lastSlave (currently only used in
change_modmap)
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This type is only used in XI to give a hint of what type this device may be.
Call it xinput_type for clarity.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This approach is broken anyway. DIPT only checked for the XInput type
"MOUSE" and the only user of this is xf86ActivateDevice when it sets the
Activate/DeactivateGrab functions.
Since synaptics and wacom set their own types, evdev only sets MOUSE for,
well, mice half the devices didn't have this set correctly anyway.
Instead, ActivatePointerGrab should be merged together with
ActivateKeyboardGrab.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Buttons append 4-byte units to the end of the reply, they need to be
included too.
Reported-by: Mark Dokter
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Both values need to fail the request, so we need to check them before
looping through the modifier masks. Otherwise, a wrong grab_window will
show up in each failed modifier return but not actually cause an error.
There's only two reasons for hierarchy events:
- device is added, removed, etc. In this case we want to send the event as
it happens.
- devices are added in a XIChangeDeviceHierarchy request. In this case we
only want one event cumulating all changes.
Rather than have one field per hierarchy change, XI2 has two fields - one
generic one and one per-device that include the device-specific flags.
This requires some funky handling for removed devices, but oh well.
This wrong check may cause BadLength to be returned to the client even if the
length is correct.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This wrong check may cause BadLength to be returned to the client even if the
length is correct.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Key events may change the modifier state, so we need to get the prev_state for
those (i.e. without the changes by the event already applied).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
A XTest virtual slave device pair (kbd/ptr) exists for every master
device pair. This is so XTest events are correctly propogated via slave
devices up to Master devices and the classes are correctly changed along
the way. We add the XTest slave device pair to the Virtual Core pointer
and provide a simple way of creating the devices.
A XTest Slave Device is identified by the XTstDevicePrivateKey property
being set in the devices devProperties
XI events are still propagated through the matching device, in the hope the
client knows what it is doing.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Allocating a slave device is essentially the same as allocating a master device.
Hence we rename AllocMaster to AllocDevicePair and provided the ability to
indicate if a master or slave device pair is required.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Some keyboards (?) advertise more than MAX_VALUATORS axes. Parts of the
internal event delivery relies on not having more than MAX_VALUATOR axes, so
let's cap it down.
If there's real devices that require more than the current 36, I'm sure we can
bump this up.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Some keyboards (?) advertise more than MAX_VALUATORS axes. Parts of the
internal event delivery relies on not having more than MAX_VALUATOR axes, so
let's cap it down.
If there's real devices that require more than the current 36, I'm sure we can
bump this up.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Virtually all callers use
XkbGetRulesDefault(&rmlvo);
InitKeyboardDeviceStruct(..., rmlvo);
Let's save them the trouble and accept NULL as a hint to take the
default RMLVO.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Benjamin Close <Benjamin.Close@clearchain.com>
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Yes, this means we have even more arguments to GrabDevice. But it beats having
a copy of most but not all of GrabDevice in ProcGrabPointer.
Also, reshuffle the order of parameters, the CARD* status is a return value
and should be last.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Split ChangeMasterDeviceClasses into an extra XISendDeviceChangedEvent that
assembles the XI2 wire event for the DeviceChanged event. Re-use this when
detaching the last SD.
Not quite perfect yet, we still copy the device classes from the slave now
rather than from the data we had when the event occured. But it's a start.
(We can now unexport SizeDeviceInfo and CopySwapDevices, not needed anymore)
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
All XI2 requests have XI prefixes.
Requests affected:
ChangeDeviceCursor
QueryDevicePointer
WarpDevicePointer
SetClientPointer
GetClientPointer
XIChangeDeviceHierarchy.
This restores the original behaviour of XI 1. Any slave device may be opened,
but none of the MDs.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
0 is now reserved for the "AllDevices" virtual device.
1 is now reserved for the "AllMasterDevices" virtual device.
This also means that wherever we passed in (mskidx = 0), we now need to pass
in the deviceid.
The masks were originally designed to generically handle event masks for
extensions. Since all that is in-server anyway, it's much better writing
custom event masks for those extensions that need it and not providing a
unified mechanism.
XI2 needs more than the current implementation, which is already too complex
for most other extensions. good riddance.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Best to FatalError if a wrong event comes in. At least that forces me to fix
it really quickly.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
dixLookupResource attempted to automatically detect whether the caller
wanted a lookup by-type or by-class, unfortunately, it guessed wrong for
RT_NONE. Instead of trying to make the guess better, this patch just reverts
the unification and creates separate functions for each operation.
Mostly the same buttons as defined by linux/input.h, with five exceptions:
"Button Unknown" for a button that cannot be labelled.
"Button Wheel Up", "Button Wheel Down" for buttons 4/5, traditionally the
wheel buttons.
"Button Horiz Wheel Up", "Button Horiz Wheel Down" for buttons 6/7,
traditionally the horiz. wheel buttons.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Daniel Stone <daniel@fooishbar.org>
Keeping an AllExtensionVersions array to save all versions of
all extension is rather pointless if only one extension uses it.
Rename to XIVersion, reduce to a single struct.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This is done by the XKB code these days anyway, so we might as well ignore it
and keep using the stanard stuff.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Don't pass xEvent* and count through to processing, pass a single
InternalEvent.
Custom handlers are disabled for the time being. And for extra fun,
XKB's pointer motion emulation is disabled. But stick an error in there so
that we get reminded should we forget about it.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
With the API change, we can now purge the XI conversion from POE.
Note: this commit breaks DGA even more.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
deviceGrab.sync.event is now an internal event, and CheckDeviceGrabs and
friends is changed over.
Note that this currently breaks some frozen grabs. See towards the end of
ComputeFreezes().
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Get rid of the deviceValuator processing and a few other things, but still
drop back into XI before checking device grabs or doing anything else.
NoticeEventTime now needs to take InternalEvents, and while we're at it,
change NoticeTime from a macro to a function.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Note that this breaks DGA. Life is tough.
EnqueueEvent is a somewhat half-baked solution, we immediately drop back into
XI and store them. But it should in theory work.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Don't let the dcce be random data.
Rather, modify the two callers to call separately for the two different.
events. Unexport SetMaskForEvent too.
And while we're at it, get rid of the MotionFilter macro, because it's one
half confusing and one half pointless.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
They end up being the same anyway on startup, so let's not have a dynamic mask
assignment mechanism and instead just hardcode them already.
Also unexport SelectForWindow and remove the valid_masks parameter. We can
check that before calling, since there's only one caller anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This part got lost in bc909f7136.
Reported by Tomas Carnecky.
Acked-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This fixes crashes on mouse/keyboard combos where the mouse is both a keyboard
and a mouse. Upon copying the SD's key info into the VCP, the NULL xkbInfo of
the VCP would crash the server.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This is copied from linux/input.h, presumably that's the ones at least the
Linux kernel can give us for any device.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Make valuator event state match other events by using the device state
from before processing the event, not after. Also, we already check the
number of valuators in UpdateDeviceState, so no need to do it again.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We always use soft-repeat at the moment; XKB posts a release/press sequence,
which admittedly needs cleaning up, but that's for another day.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Instead of always keeping two copies of the keymap, only generate the
core keymap from the XKB keymap when we really need to, and use the XKB
keymap as the canonical keymap.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Replace both core and Xi functions with one function that validates the
proposed map, and sends out both kinds of notification.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Keyboard map notifications are always generated from within XKB code,
which also takes care of copying the keysyms, etc. If you need to
mangle the keymap yourself, generate a new core keymap/modmap, and pass
it to XkbApplyMappingChange.
SendMappingNotify is renamed to SendPointerMappingNotify (and ditto its
Device variants), which still only _sends_ the notifications, as opposed
to also doing the copying a la XkbApplyMappingChange.
Also have the modmap change code traverse the device hierachy, rather
than just going off the core keyboard.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
XIShouldNotify just lets you know if you should send an event for a
keymap change (or similar) concerning a given device to a given client;
at the moment, this is only for devices which are sending events to that
client.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We already have modmap (in the exact same format!) in XKB, so just use
that all the time, instead of duplicating the information.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Since modifierKeyMap is generated from modifierMap, just remove it, and
only generate it when we need to send the modifier map to the client.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Modifiers get cleared by the XKB code when we drop down into core input
processing, so just delete the dead code path to simplify things a bit.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We already have state fully stored within XKB, so instead of duplicating it,
just generate the values to send to clients when required.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
XkbInitKeyboardDeviceStruct is now the only valid keyboard
initialisation: all the details are hidden behind here. This now makes
it impossible to supply a core keymap at startup.
If dev->key is valid, dev->key->xkbInfo->desc is also valid.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
No more #ifdef XKB, because you can't disable the build, and no more
noXkbExtension either.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This fixes the following bug. Assuming your window manager grabs
Alt+Button1 to move windows, map Button3 to 0 via XSetPointerMapping,
then press the physical button 3 (this shouldn't have any effect), press
Alt and then button 1. The press event is delivered to the application
instead of firing the grab.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Note: properties don't need to be cleaned up, the DIX does it for us anyway.
Data that is stored in properties is cleaned up by the property system.
Handlers, etc. don't need to be unregistered while cleaning up, as they get
deleted when the device is removed anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Signed-off-by: Simon Thum <simon.thum@gmx.de>
This property is used to denote type float for input properties. Such
properties can be accessed easily through the XIPropToFloat() function.
Code originally written by Simon Thum.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Converts an XIPropertyValuePtr to an integer, provided that type and format is
right.
Code originally written by Simon Thum.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
CheckMotion updates the sprite position so we need to call it for all devices
that have a sprite - including floating SDs (which have an invisible sprite).
We mustn't realloc as we are inside a signal handler. With
SetMinimumEventSize, this code should never be hit anyway, as the event list
should have the required memory before this code is hit.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
A grep on xorg/* revealed there's no consumer of this define.
Quote Alan Coopersmith:
"The consumer was in past versions of the headers now located
in proto/x11proto - for instance, in X11R6.0's xc/include/Xproto.h,
all the event definitions were only available if NEED_EVENTS were
defined, and all the reply definitions required NEED_REPLIES.
Looks like Xproto.h dropped them by X11R6.3, which didn't have
the #ifdef's anymore, so these are truly ancient now."
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Save in a few special cases, _X_EXPORT should not be used in C source
files. Instead, it should be used in headers, and the proper C source
include that header. Some special cases are symbols that need to be
shared between modules, but not expected to be used by external drivers,
and symbols that are accessible via LoaderSymbol/dlopen.
This patch also adds conditionally some new sdk header files, depending
on extensions enabled. These files were added to match pattern for
other extensions/modules, that is, have the headers "deciding" symbol
visibility in the sdk. These headers are:
o Xext/panoramiXsrv.h, Xext/panoramiX.h
o fbpict.h (unconditionally)
o vidmodeproc.h
o mioverlay.h (unconditionally, used only by xaa)
o xfixes.h (unconditionally, symbols required by dri2)
LoaderSymbol and similar functions now don't have different prototypes,
in loaderProcs.h and xf86Module.h, so that both headers can be included,
without the need of defining IN_LOADER.
xf86NewInputDevice() device prototype readded to xf86Xinput.h, but
not exported (and with a comment about it).
Rather than assuming rules in the CoreKeyboardProc, init the default rules in
InitCoreDevices, then re-use them later.
In the xfree86 DDX, set the rules to "base" or "evdev", depending on whether
we'll load kbd or evdev.
If we create a new MD, use pc105,us as default and re-use the rules file used
previously.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
The device's button down state array was changed to use DOWN_LENGTH and thus
bitflags for each button in cfcb3da7.
Update the DBSN events to copy this bit-wise state.
Update xkb and Xi to check for the bit flag instead of the array value.
Reported by ajax.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
This is the biggest "visibility" patch. Instead of doing a "export"
symbol on demand, export everything in the sdk, so that if some module
fails due to an unresolved symbol, it is because it is using a symbol
not in the sdk.
Most exported symbols shouldn't really be made visible, neither
advertised in the sdk, as they are only used by a single shared object.
Symbols in the sdk (or referenced in sdk macros), but not defined
anywhere include:
XkbBuildCoreState()
XkbInitialMap
XkbXIUnsupported
XkbCheckActionVMods()
XkbSendCompatNotify()
XkbDDXFakePointerButton()
XkbDDXApplyConfig()
_XkbStrCaseCmp()
_XkbErrMessages[]
_XkbErrCode
_XkbErrLocation
_XkbErrData
XkbAccessXDetailText()
XkbNKNDetailMaskText()
XkbLookupGroupAndLevel()
XkbInitAtoms()
XkbGetOrderedDrawables()
XkbFreeOrderedDrawables()
XkbConvertXkbComponents()
XkbWriteXKBSemantics()
XkbWriteXKBLayout()
XkbWriteXKBKeymap()
XkbWriteXKBFile()
XkbWriteCFile()
XkbWriteXKMFile()
XkbWriteToServer()
XkbMergeFile()
XkmFindTOCEntry()
XkmReadFileSection()
XkmReadFileSectionName()
InitExtInput()
xf86CheckButton()
xf86SwitchCoreDevice()
RamDacSetGamma()
RamDacRestoreDACValues()
xf86Bpp
xf86ConfigPix24
xf86MouseCflags[]
xf86SupportedMouseTypes[]
xf86NumMouseTypes
xf86ChangeBusIndex()
xf86EntityEnter()
xf86EntityLeave()
xf86WrapperInit()
xf86RingBell()
xf86findOptionBoolean()
xf86debugListOptions()
LoadSubModuleLocal()
LoaderSymbolLocal()
getInt10Rec()
xf86CurrentScreen
xf86ReallocatePciResources()
xf86NewSerialNumber()
xf86RandRSetInitialMode()
fbCompositeSolidMask_nx1xn
fbCompositeSolidMask_nx8888x0565C
fbCompositeSolidMask_nx8888x8888C
fbCompositeSolidMask_nx8x0565
fbCompositeSolidMask_nx8x0888
fbCompositeSolidMask_nx8x8888
fbCompositeSrc_0565x0565
fbCompositeSrc_8888x0565
fbCompositeSrc_8888x0888
fbCompositeSrc_8888x8888
fbCompositeSrcAdd_1000x1000
fbCompositeSrcAdd_8000x8000
fbCompositeSrcAdd_8888x8888
fbGeneration
fbIn
fbOver
fbOver24
fbOverlayGeneration
fbRasterizeEdges
fbRestoreAreas
fbSaveAreas
composeFunctions
VBEBuildVbeModeList()
VBECalcVbeModeIndex()
TIramdac3030CalculateMNPForClock()
shadowBufPtr
shadowFindBuf()
miRRGetScreenInfo()
RRSetScreenConfig()
RRModePruneUnused()
PixmanImageFromPicture()
extern int miPointerGetMotionEvents()
miClipPicture()
miRasterizeTriangle()
fbPush1toN()
fbInitializeBackingStore()
ddxBeforeReset()
SetupSprite()
InitSprite()
DGADeliverEvent()
SPECIAL CASES
o defined as _X_INTERNAL
xf86NewInputDevice()
o defined as static
fbGCPrivateKey
fbOverlayScreenPrivateKey
fbScreenPrivateKey
fbWinPrivateKey
o defined in libXfont.so, but declared in xorg/dixfont.h
GetGlyphs()
QueryGlyphExtents()
QueryTextExtents()
ParseGlyphCachingMode()
InitGlyphCaching()
SetGlyphCachingMode()
If the event is an XI event, we need to work on the correct device, not on
the VCK.
Adds XIGetDevice(event) function to extract the device from an event.
Really, this was a bad idea. It's not security, the UI features that would
have been cool (e.g. clicking through windows) aren't implemented anyway, and
there's nothing you can't achieve just by using plain XI anyway.
Requires inputproto 1.9.99.6.
The current code exposes to inconsistent updates, i.e. if handler N succeeds
but handler N+1 fails in setting the property, an error is returned to the
client although parts of the server now behave as if the property change
succeeded.
This patch adds a "checkonly" parameter to the SetProperty handler. The
handlers are then called twice, once with checkonly set to TRUE.
On the checkonly run, handlers _MUST_ return error codes if the property
cannot be applied. Handlers are not permitted to actually apply the changes.
On the second run, handlers are permitted to apply property changes.
Errors codes returned on the second run are ignored.
Most of its component get copied during CopyKeyClass anyway.
The ones that aren't:
postdown - never changed for virtual devices anyway.
down - shouldn't change that without sending events.
memcpy'ing the struct also copied mapWidth, which means we didn't realloc
during SetKeySymsMap lateron, overwriting the memory assigned to us.
X.Org Bug 16167 <http://bugs.freedesktop.org/show_bug.cgi?id=16167>
A property can only be deleted if any of the following is true:
- if a property is deletable and all handlers return Success.
- if a property is non-deleteable and the all handlers return Success AND the
delete request does not come from a client (i.e. driver or the server).
A client can never delete a non-deletable property.
We may need more than one handler to deal with a property (e.g. one in the
driver, one in the DIX), so get the handlers into a linked list and call them
one-by-one. This is of course slightly less entertaining than the hilarious
WRAP/UNWRAP game we play in other parts of the server.
XIRegisterPropertyHandler/XIUnregisterPropertyHandler are the interface
drivers/the DIX should use to attach themselves to the device.
XIDeleteAllDeviceProperties destroys everything, including the handlers.
Basically just copied from randr properties, with minor changes only.
Each device supports arbitrary properties that can be modified by clients.
Modifications to the properties are passed to the driver (if applicable) and
can then affect the configuration of the device.
Note that device properties are limited to a specific device. A property set
on a slave device does not migrate to the master.
Basically just copied from randr properties, with minor changes only.
Each device supports arbitrary properties that can be modified by clients.
Modifications to the properties are passed to the driver (if applicable) and
can then affect the configuration of the device.
Note that device properties are limited to a specific device. A property set
on a slave device does not migrate to the master.
This fixes a severe issue - when the client died the event mask didn't get
unregistered and a future event would dereference dangling pointers. By
storing the event masks in the resource system we can free them when the
client dies.
Using id = 0 only worked pre-MPX since XInput didn't allow XOpenDevice for the
core devices (0 and 1). Now we can now legally register for events so we may
overwrite our device-independent classes with the ones selected for the VCP.
So, increase the EMASKSIZE to MAX_DEVICES + 1 and use MAX_DEVICES as the ID
when we don't have a device.
Mixing usage where some parts of the code treated this field as a bitmask
and other parts as an array of card8 was wrong, and as the wire protocol
wanted bitmasks, it was less invasive to switch the newer counting code use
booleans.
Master devices track slave buttons by waiting for all slave buttons to be
released before delivering the release event to the client.
This also removes the state merging code in DeepCopyDeviceClasses -- that
code was changing master device state without delivering any events,
violating protocol invariants. The result will be that existing slave
button state which does not match the master will not be visible through the
master device. Fixing this would require that we synthesize events in this
function, which seems like a bad idea. Note that keyboards have the same
issue.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter@cs.unisa.edu.au>
device->button->down used to be a 32-byte bitmask with one bit for each
button. This has changed into a 256-byte array, with one byte assigned for
each button. Some of the callers were still using this array as a bitmask
however, this is fixed with this patch.
Thanks to Keith Packard for pointing this out. See also:
http://lists.freedesktop.org/archives/xorg/2008-June/036202.html
Button events were mapped once in GetPointerEvents and then again in
UpdateDeviceState. While it might make sense to just fix up UpdateDeviceState,
it turns out to be better to leave the raw button number in the event because
DGA reports raw device events without button translation, and so when it calls
UpdateDeviceState, the button down counts get scrambled and buttons get stuck
down.
See also:
http://lists.freedesktop.org/archives/xorg/2008-June/036201.html
Signed-off-by: Peter Hutterer <peter@cs.unisa.edu.au>
The core protocol requires absolute values and it's a bit hard to get them if
we only have relative ones in the history. Switch the motion history to
absolute, and if we really need the relative values, we can probably generated
them from the abs. ones in the future.