Fix various pieces of debug output, mainly under --enable-debug, which use a
"%08x" printf format for a pointer type. Use "%p" format for 64-bit portability.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Again, as the documentation says, "unsupported, obsolete".
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Rename the libwinclipboard internal header from winclipboard.h to internal.h
Put libwinclipboard's public interface into winclipboard.h
This lets winclipboardinit.c partake of that public interface, and all X server
headers without clashes
winInitClipboard() prototype belongs in a server header
v2: Remove duplicate declaration of winClipboardWindowDestroy()
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
For clarity, use boolean AND rather than bitwise AND in
WIN_POLLING_MOUSE_TIMER_ID processing.
Signed-off-by: Colin Harrison <colin.harrison@virgin.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Handle WM_MOUSEHWHEEL tilt wheel messages, similarly to WM_MOUSEWHEEL scroll
wheel messages, to generate X button 6 and 7 presses and releases.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Map extra mouse buttons 1 and 2 to X buttons 8 and 9, as conventional, leaving X
buttons 6 and 7 for tilt wheel.
Also add button labels for buttons 6, 7, 8 and 9 and change btn_labels in from a
dynamic allocation to a fixed one of the required size for all the labels we
use.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Change winTranslateKey() to return it's result as it's return value, and change
it's uses as well.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Currently, WM_ENDSESSION just calls GiveUp() to set the DE_TERMINATE flag. But
for the X server to exit cleanly, we also need the X server dispatch loop to be
unblocked so it can notice that DE_TERMINATE has been set and exit, removing
it's lock file and any unix domain socket.
It appears that the system will terminate the process when the last UI thread in
that process returns from processing WM_ENDSESSION for the last top-level
window.
Since WM_ENDSESSION appears to sent by the system via SendMessage()
(synchronously) and the wndproc is called to process it in the message thread
for that window (the X server thread), we can't easily terminate the X server
dispatch loop from inside the WM_ENDSESSION message processing.
So, create a messaging window, a hidden, top-level window, with a separate
thread to catch this message, and process it by calling GiveUp() and then
blocking on a mutex until the X server dispatch loop exits.
Also, notice when this is a shutdown cancel WM_ENDSESSION message and take no
action.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
/jhbuild/checkout/xorg/xserver/hw/xwin/winwndproc.c: In function ‘winWindowProc’:
/jhbuild/checkout/xorg/xserver/hw/xwin/winwndproc.c:65:22: error: variable ‘s_hInstance’ set but not used [-Werror=unused-but-set-variable]
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Don't spam MotionNotify events when the mouse hasn't moved, when polling the
mouse position outside any X window
(Test with 'xev -root' after mouse polling has started.)
Signed-off-by: Colin Harrison <colin.harrison@virgin.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
In windowed mode, with option -resize, RANDR resize was missing when the screen
window was maximized or restored.
Signed-off-by: Colin Harrison <colin.harrison@virgin.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
This is strictly the application of the script 'x-indent-all.sh'
from util/modular. Compared to the patch that Daniel posted in
January, I've added a few indent flags:
-bap
-psl
-T PrivatePtr
-T pmWait
-T _XFUNCPROTOBEGIN
-T _XFUNCPROTOEND
-T _X_EXPORT
The typedefs were needed to make the output of sdksyms.sh match the
previous output, otherwise, the code is formatted badly enough that
sdksyms.sh generates incorrect output.
The generated code was compared with the previous version and found to
be essentially identical -- "assert" line numbers and BUILD_TIME were
the only differences found.
The comparison was done with this script:
dir1=$1
dir2=$2
for dir in $dir1 $dir2; do
(cd $dir && find . -name '*.o' | while read file; do
dir=`dirname $file`
base=`basename $file .o`
dump=$dir/$base.dump
objdump -d $file > $dump
done)
done
find $dir1 -name '*.dump' | while read dump; do
otherdump=`echo $dump | sed "s;$dir1;$dir2;"`
diff -u $dump $otherdump
done
Signed-off-by: Keith Packard <keithp@keithp.com>
Acked-by: Daniel Stone <daniel@fooishbar.org>
Acked-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Ignore WM_DISPLAYCHANGE messages which indicate bpp is changing to 0.
That has no defined meaning I can find, but some graphics card drivers
appear to generate it on suspend/resume or screensaver activate/deactivate.
Signed-off-by: Colin Harrison <colin.harrison@virgin.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
I also had problems with the AltGr key. These could reliably
be reproduced by holding the AltGr for some seconds (causing
Windows generating auto repeat events)
I discovered that the mechanism in winkeybd.c function
winIsFakeCtrl_L had a problem if PeekMessage cannot obtain
the next Alt_R message because it is not there yet.
I prepared a patch that remembers the last Ctrl_L event and
reacts on a later Alt_R.
It was also necessary to alter the order in winWindowProc() in
winwndproc.c: the invocation of winIsFakeCtrl_L had to be done
before discarding auto-repeated key presses, as winIsFakeCtrl_L()
now has an internal state which must be updated by all key events.
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
TrackMouseEvent has existed in user32 since at least NT4, so
don't bother with jumping through all the ancient compatibility hoops
of finding if _TrackMouseEvent() exists in comctl32 so it can check
if TrackMouseEvent() exists in user32 to see if it needs to emulate
it...
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Fix winShadowUpdateDD(|NL) so we don't try to blit to primary surface if it didn't get allocated
(Intel drivers, in particular, seem to like to issue a WM_DISPLAYCHANGE during a suspend/resume
cycle, but not allow surface to be allocated right then)
Also:
Use winReleasePrimarySurfaceShadowDD(|NL) in winFreeFBShadowDD(|NL) rather than open coding it
Don't mess about recreating surface if we're going to resize it anyhow
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Make ShadowGDI drawing engine only change the size of the screen
pixmap/shadow framebuffer on an RANDR change, not the bpp/depth
as well.
The server requires the screen pixmap's depth to be invariant.
Other drawing engines aren't quite as affected by this issue as
they won't draw to the display, if it has changed colour depth,
but probably still need some attention.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
When RANDR resizing is enabled, generate an internal RANDR change when
WM_DISPLAYCHANGE occurs in rootless modes for screens which occupy an
entire monitor or the virtual desktop.
Store the monitor number and use that to handle WM_DISPLAYCHANGE for a
screen specified with '-screen @monitor'
In rooted mode, WM_DISPLAYCHANGE isn't relevant (except where display
depth changes may cause problems). (A maximized screen window will get
WM_SIZE to adjust it to the new monitor size)
In rooted fullscreen mode, WM_DISPLAYCHANGE shouldn't be seen, as we
have the resolution we have selected for the fullscreen session)
(Could client randr requests be handled in fullscreen to cause a change
of the fullscreen resolution? )
Don't bother do a RANDR resize if the dimensions aren't actually changing
when WM_DISPLAYCHANGE is sent (should handle WM_DISPLAYCHANGE to size 0x0
that the intel driver seems to like to send)
Various debug output improvements
Also, remove the note that XWin can't handle display mode changes from
the man page
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
To avoid recursion, WM_SIZE requests shouldn't generate XRANDR requests
when no change is neeeded.
We do the actual resize on WM_EXITSIZEMOVE, as resizing occurs in
a modal loop, to avoid a backlog of resize events building up as
the X server doesn't get a change to process anything until the resize
is completed.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Add -resize command line option to configure how native window sizing frame
is used.
In additions to the existing fixed and scrollbars modes, add a new mode to
allow framebuffer to be resized using native window frame
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Remove an attempt at the rather difficult optimization of detecting
if WM_DISPLAYCHANGE affects any of the monitors which intersect the
native window for the X screen.
We'll always act as if it does, which it probably usually the case.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
For the global variables defined in winglobals.c, remove duplicate extern
declarations from the beginning of various .c files, and move most of them
into a new header file, winglobals.h
Leave some clipboard related variables alone for the moment, they need treating
more carefully, to avoid mixing client and server type definitions.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Avoid a null pointer dereference if WM_MOUSEMOVE occurred before
the input device had been initialized (a timing sensitive bug
occassionally seen during initialization)
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Fix a stray '}'
Update to use RMLVO interface
Remove g_winInfo.xkb.disable, can never be set since noXkbExtension has been removed
Change to retrieve modifier key state using XkbStateFieldFromRec() from Colin Harrison
Update to use XKB defaults from xkb-config.h
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
No more #ifdef XKB, because you can't disable the build, and no more
noXkbExtension either.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
