It is currently assumed that an event button delieved to a master device
corresponds to the slave button states. However, the event button is a
logical (mapped) slave button and slave button states correspond to
physical (unmapped) slave buttons. This leads to incorrect update of the
master button state and incorrect events devlivered to clients. Fix the
situation by taking the slave button map into account when querying a
slave button state.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=24887
Signed-off-by: Eoghan Sherry <ejsherry@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We have per-axis mode now. For those bits that still need it (XI 1.x),
assume that the first axis holds the device's mode.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Previously the OutOfProximity bit in the valuator mode.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
The XI2 protocol supports per-axis modes, but the server so far does
not. This change adds support in the server.
A complication is the fact that XI1 does not support per-axis modes.
The solution provided here is to set a per-device mode that defines the
mode of at least the first two valuators (X and Y). Note that initializing
the first two axes to a different mode than the device mode will fail.
For XI1 events, any axes following the first two that have the same mode
will be sent to clients, up to the first axis that has a different mode.
Thus, if a device has relative, then absolute, then relative mode axes,
only the first block of relative axes will be sent over XI1.
Since the XI2 protocol supports per-axis modes, all axes are sent to the
client.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
RegisterPointerDevice() and RegisterKeyboardDevice() were already mapped to
RegisterOtherDevice() and obsolete.
RegisterOtherDevice() was called for all devices and the two assignments can
simply be moved into AddInputDevice(). Purge RegisterOtherDevice() and
pretend it never happened.
*lalalalala*
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
After copying the unused_classes into the device, reset the original
pointer. Otherwise we have two pointers pointing to the same field and both
get freed on device removal.
Some classes already have this behaviour since 51c8fd69.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Same as the matching key functions. Buttons, like keys, can have two states
for down/up - one posted, one processed. Posted is set during event
generation (usually in the signal handler). Processed is set during event
processing when the event queue is emptied and events are being delivered to
the client.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
The modifier key count is maintained by the XKB layer and
increased/decreased for all modifiers that set state.
Test case, MD/SD modifier key count in comment:
1. keyboard 1: press and hold Shift_L # SD:1 MD:1
2. keyboard 2: press and release Shift_L # SD:1,0 MD:1,0
<class copy happens> # SD:1 MD:1
3. keyboard 1: release Shift_L # SD:0 MD:1
4. keyboard 1: press and release Shift_L # SD:1,0 MD:2,1
The modifier is now logically down on the MD but not on keyboard 1 or
keyboard 2.
XKB is layered in before the DIX, it increases/decreases the modifier key
count accordingly. In the above example, during (2), the MD gets the key
release and thus clears the modifier bit. (3) doesn't forward the release to
the MD because it is already cleared. The copy of modifierKeysDown when the
lastSlave changes however increases the counter for the held key. On (4),
the press and release are both forwarded to the MD, causing a offset by 1
and thus do not clear the logical modifier state.
X.Org Bug 25480 <http://bugs.freedesktop.org/show_bug.cgi?id=25480>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Daniel Stone <daniel@fooishbar.org>
This patch was generated by the following Perl code:
perl -i -pe 's/([^_])return\s*\(\s*([^(]+?)\s*\)s*;(\s+(\n))?/$1return $2;$4/g;'
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Many references to the WindowTable array already had the corresponding
screen pointer handy, which meant they usually looked like
"WindowTable[pScreen->myNum]". Adding a field to ScreenRec instead of
keeping this information in a parallel array simplifies those
expressions, and eliminates a MAXSCREENS-sized array.
Since dix uses this data, a screen private entry isn't appropriate.
xf86-video-dummy currently uses WindowTable, so it needs to be updated
to reflect this change.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com> (i686 GNU/Linux)
Rather than always returning BadValue, associate an error status like
BadWindow with a resource type like RT_WINDOW, and return the
appropriate one for the requested type.
This patch only touches the core protocol resource types. Others still
return BadValue and need to be mapped appropriately.
dixLookupResourceByType can now return BadImplementation, if the caller
asked for a resource type that has not been allocated in the server.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Just let Dispatch() check for a noClientException, rather than making
every single dispatch procedure take care of it.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
The only remaining X-functions used in server are XNF*, the rest is converted to
plain alloc/calloc/realloc/free/strdup.
X* functions are still exported from server and x* macros are still defined in
header file, so both ABI and API are not affected by this change.
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
In the process, fixes a memory leak in CloseDevice, and an unchecked
memory allocation in InitializePredictableAccelerationProperties.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reintroduce a check which used to be there in the old
ProcessKeyboardEvent/ProcessPointerEvent codepath, which avoids us
recording events subject to a grab twice: once when it's first processed
in EnqueueEvent, and then again when it's thawed and being replayed.
This required a tiny amount of code motion to expose syncEvents.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
RECORD was disabled during the switch to internal events. This patch
modifies the record callback to work with internal events instead of
xEvents. The InternalEvents are converted to core/Xi events as needed.
Since record is a loadable extension, the EventTo* calls must be externed.
Signed-off-by: Chris Dekter <cdekter@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If the indicator flags have the XkbSLI_IsDefault bit set, the indicator map
and names aren't their own bit of memory but rather point into the
device->key->xkbInfo->desc structure. XkbCopySrvLedInfo knows about this and
leaves the pointers alone.
When copying the classes from the slave to the master, these pointers are
copied and still point to the dev->key class of the slave device. If the
slave device is removed, the memory becomes invalid and a call to modify
this data (e.g. XkbSetIndicators) may cause a deadlock.
The copying of dev->key relies on dev->kbdfeed to be already set up. Hence
the pointers need to be reset once _both_ kbdfeed and key have been copied
into the master device.
X.Org Bug 25640 <http://bugs.freedesktop.org/show_bug.cgi?id=25640>
Fedora Bug 540584 <https://bugzilla.redhat.com/show_bug.cgi?id=540584>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Subpixel data in data_frac is stored as FP32.32, hence we need to get that
down again before adding it to the current value.
Reported-by: Thomas Jaeger
Tested-by: Thomas Jaeger
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
For core and XI1 events, store the key_repeat flag in the sequence number
until TryClientEvents. The sequenceNumber is unset until TryClientEvents.
[Also thrown in, some random indentation changes. Thanks]
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Fixes crash if the first XISelectEvents has a zero sized event mask.
Fixes crash if the mask provided is larger than others->xi2mask[].
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
A missing break meant that ButtonPress would fall through into
ButtonRelease, but luckily it appears to have been completely harmless.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
DCEs are now processed when sent throught the master device, not when sent
through the slave device. This includes a removal of some un-used (or partly
used) fields in the DCE itself to something more self-explanatory.
TODO: if a device has events queued and its attachment is changed, the DCE
is silently dropped now. Instead, it should be generated as soon as the
first event after the attachment is sent.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The version in eventconvert.c was half broken and for some reason we ended
up with a second version in exevents.c (which works). Move it over to where
it belongs and call EventToXI2 instad of having a custom function for it.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If a new device posts an event while the DCE is in the queue, getting the
data from the device may result in invalid memory access.
X.Org Bug 23100 <http://bugs.freedesktop.org/show_bug.cgi?id=23100>
Unlike Enter/Leave events generated by a device pushing the pointer around,
a device doesn't change focus all by itself. It's a result of a
SetInputFocus call, a window becoming unviewable or a grab activating. As
such, the sourceid for focus events is always the deviceid itself.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Use enum EventType instead of ints. This requires a load of default
cases in various switch statements to silence compiler warnings.
Reported-by: Aaron Plattner
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
InternalEvents shouldn't be used anywhere outside the X server itself. Split
up into events.h for opaque typedefs for the events needed by various
headers and eventstr.h for the actual struct definitions.
eventstr.h must only be included by code that requires internal events and
is not part of the SDK.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
New access modes are being passed to the device access hook for XI2:
DixCreateAccess for creating a new master device;
DixAdd/RemoveAccess for attaching/removing slave devices to a master; and
DixListProp/GetProp/SetPropAccess for device properties.
Refer to the XACE-Spec document in xorg-docs, section "Device Access."
Signed-off-by: Eamon Walsh <ewalsh@tycho.nsa.gov>
Master devices provide the union of all attached slave devices' buttons,
i.e. the number of buttons on the master device is always the number of
buttons of the slave device with the highest number of buttons. When slaves
are attached or detached, the master device adjusts the button number to
reflect the new buttons.
On a slave switch, this slave's button labels are copied into the master (up
to slave->num_buttons). The remaining button labels (if any) stay as they
are. Thus, if any of the higher buttons is still pressed, it reflects the
label of the last pressed device that provided this button.
If two devices press the same button and it is differently labelled the last
pressed one will be reflected in the master device.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The previous code would always skip the last valuator due to a wrong
upper boundary in the loop. last_valuator is the index of the last set
valuator - which also means it must be initialized to -1, not 0.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Some files (notably those merged with MPX before XI2 came along) didn't use
a 'xi' prefix. This patch changes all of them to meaningful names.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
zero-length masks are supposed to clear the device's mask.
ProcXISelectEvents passes these masks through directly, so we need to clear
the bits here if such a mask is supplied.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>